MMS2022: MEDITERRANEAN MICROWAVE SYMPOSIUM 2022

A
Abou El Majd, Badr	Solving the RFID network planning problem under the perturbation effect defined by a new probabilistic power-based model
Addamo, Giuseppe	3D-Printing of Antenna-Feed Components for Space Applications
Agastra, Elson	RCS analysis on ultra-wideband sinuous antenna with elliptical slots
Akinci, Mehmet Nuri	Effects of Calibration Process on Complex Dielectric Permittivity Measurements with Open-Ended Coaxial Probes
Al-Alem, Yazan	Millimeter-Wave Antennas Directivity Enhancement and Feeding Network Reduction Techniques
Al-Juwhari, Mohammad	Compound Reconfigurable Bio-Inspired Antenna Design
Al-Makdadi, Qusai	Compound Reconfigurable Bio-Inspired Antenna Design
Albani, Matteo	Wide-Angle Anomalous Refraction Using Efficient Surface Field Optimization for Different Polarizations
Alcaide, Carlos	Multipactor Analysis by Exploiting Kadane's Method
Alonzo, Mario	Environmental exposure to electromagnetic fields: A geo-referenced Cadaster of the Radiofrequency sources in Basilicata Region
Alsukour, Mohammad	Side-Edge Dual-Band Antenna for 5G and Wi-Fi 6 Applications
Altinozen, Ekrem	Characterization of Flexible Interconnects
Altuncu, Yasemin	Design of a Novel Dual-Wideband Filtenna
Alvarez Melcon, Alejnadro	Flexible and Low-cost RFID-UHF Tag Antennas for Remote Blood Tracking Applications
Alwakil, Ahmed	Dual-Band, Dual-polarized 16-Slot Continuous Transverse Stub Array for SatCom Applications
Alù, Andrea	Designing Reconfigurable Reflective and Radiating Structures by Exploiting Composite Vortex Theory
Amato, Lorenzo	Environmental exposure to electromagnetic fields: A geo-referenced Cadaster of the Radiofrequency sources in Basilicata Region
Amendola, Giandomenico	Design of an in-package transmit-array for automotive applications:preliminary results E-Band SIW-fed aperture coupled Magneto-Electric Dipole Antenna for 5G Backhauling systems Preliminary results on a compact duplexer design for K/Ka-Band SatCom on the Move User Terminals A wideband aperture coupled Rhomboid MagnetoElectric Dipole Antenna for Millimeter Wave Applications Phased arrays based on hybrid clusters
Amendola, Giandomenico	Characterization-oriented design of E-band Variable-Gain Amplifiers in BiCMOS technology
Anelli, Francesco	Wideband antipodal Vivaldi antenna with metalenses for GPR applications Design of Electromagnetic Shielding for Food Pasteurization via Corrugated Waveguide and Graphite Rings
Angeletti, Piero	Generalized Thru-Reflect-Line Calibration for the Measurement of Waveguide Devices up to the third Harmonic: First Results
Anselmi, Nicola	Design and Planning of Static and Reconfigurable EM Skins for Smart Electromagnetic Environments
Antar, Yahia	Millimeter-Wave Antennas Directivity Enhancement and Feeding Network Reduction Techniques
Apollonio, Francesca	Human Body Exposure to a Vehicular Antenna: a Numerical Study in a Realistic Military Scenario
Appenrodt, Nils	Calibration and Signal Processing of Polarimetric Radar Data in Automotive Applications
Araneo, Rodolfo	Magnetic Shielding of a Thick Circular Conductive Disk Against a Coaxial Current Loop
Aras, Yunus Erdem	GaN-based Single Stage Low Noise Amplifier for X-band Applications X-band Cascode LNA with Bias-invariant Noise Figure using 0.15 µm GaN-on-SiC Technology
Arenare, Davide	Comparison between Milling and Wire Erosion for Manufacturing All-Metal High-Pass Dichroic Mirrors
Arnieri, Emilio	Design of an in-package transmit-array for automotive applications:preliminary results E-Band SIW-fed aperture coupled Magneto-Electric Dipole Antenna for 5G Backhauling systems Preliminary results on a compact duplexer design for K/Ka-Band SatCom on the Move User Terminals A wideband aperture coupled Rhomboid MagnetoElectric Dipole Antenna for Millimeter Wave Applications Phased arrays based on hybrid clusters
Arnold, Christian	K/Ka-Band MIMO Beamforming Phased Antenna Array with Multilayer Substrate Integrated Coaxial Line Feeding Network
Assante, Dario	Analytically Regularized Evaluation of the Wakefield of a Particle Travelling through a Plane Conducting Ring
Atanaskovic, Aleksandar	TLM Mesh Impact on Textile Antenna Modelling
Ayadi, Houda	Printed Hexagonal antenna with Dual Reconfigurable Wide Rejected Bands
Aydınalp, Cemanur	Effects of Calibration Process on Complex Dielectric Permittivity Measurements with Open-Ended Coaxial Probes
Azad, Ehsan Mehrabi	Cardiff Model Utilization for Predicting the Response of Multiple-Input Power Amplifiers
Azizi, Mohamed Karim	Design of Microstrip Antenna for 5G Applications at 28 GHz
B
Badini, Damiano	A Joint Radar- and GPS- aided Beam Management at Infrastructure
Barbuto, Mirko	Designing Reconfigurable Reflective and Radiating Structures by Exploiting Composite Vortex Theory Metasurface Coatings Enabling Scattering, Frequency, and Radiation Tunability for Next-Generation Antenna Systems Optimal Design of Huygens Metasurfaces for Oblique Incidence through a Microwave Network Approach
Barengolts, Irwin	Silicon based Metamaterials for Dielectric Waveguides in the THz Range
Barmada, Sami	Dielectric Characterization Improvement of Biopsy Samples Via a Coated Open-Ended Coaxial Probe
Bartolini, Matteo	Research In Outer Space: Facilitating access to space supporting scientific and technological advancement
Barwoski, Jan	Silicon based Metamaterials for Dielectric Waveguides in the THz Range
Beccaria, Michele	Beam steering mm-waves dielectric-only reflectarray Optimization-based design of isoflux reflectarray
Beccherelli, Romeo	Design of a Tunable THz 1-D Leaky-Wave Antenna based on Nematic Liquid Crystals High Data Rate OOK Wireless Link at 300 GHz Band through Metasurface-based Filters: Analysis, Design, and Experiment
Becker, S	An Amplified W-Band Radar A SFCW K-Band Radar Modified for LTCC
Beeby, Steve	Towards Multi-Mode Millimeter Wave Body Area Networks for Information and Power Transmission: A Co-Existence Study
Beldi, Sabri	Printed Hexagonal antenna with Dual Reconfigurable Wide Rejected Bands
Bell, James J.	Cardiff Model Utilization for Predicting the Response of Multiple-Input Power Amplifiers
Ben Hattab, Cheima	Monitoring freshness of Tommy Mango Fruit with an RFID Tag
Benassi, Francesca	A novel Hexagonal Excitation for a Multi-Layer Wearable Miniaturized Antenna
Benini, Martina	Computational Assessment of RF Exposure Levels due to 5G Mobile Phones Human RF-EMF Exposure Assessment for a Wearable Device by Stochastic Dosimetry
Benoni, Arianna	Design and Planning of Static and Reconfigurable EM Skins for Smart Electromagnetic Environments
Berardi, Antonio	Continuous microwave pilot plant for almond disinfestation: preliminary tests
Bevacqua, Martina	Advances in MRI based Electrical Properties Tomography: a Comparison between Physics-supported Learning Approaches Introduction to microwave tomography – case of study: breast cancer detection and characterization
Bezzetto, Lorenzo	A Joint Radar- and GPS- aided Beam Management at Infrastructure
Biberaj, Aleksander	RCS analysis on ultra-wideband sinuous antenna with elliptical slots
Bilotti, Filiberto	Designing Reconfigurable Reflective and Radiating Structures by Exploiting Composite Vortex Theory Metasurface Coatings Enabling Scattering, Frequency, and Radiation Tunability for Next-Generation Antenna Systems Optimal Design of Huygens Metasurfaces for Oblique Incidence through a Microwave Network Approach
Biscarini, Marianna	Human Body Exposure to a Vehicular Antenna: a Numerical Study in a Realistic Military Scenario
Boccia, Luigi	Welcome to MMS 2022 Design of an in-package transmit-array for automotive applications:preliminary results BiCMOS Rat-Race Coupler Based on Slow-Wave CPS Transmission lines for 120 GHz Applications Preliminary results on a compact duplexer design for K/Ka-Band SatCom on the Move User Terminals Characterization-oriented design of E-band Variable-Gain Amplifiers in BiCMOS technology A modular approach to SatCom user terminal design (FLEXCOM EU Project) Phased arrays based on hybrid clusters
Boccia, Luigi	E-Band SIW-fed aperture coupled Magneto-Electric Dipole Antenna for 5G Backhauling systems A wideband aperture coupled Rhomboid MagnetoElectric Dipole Antenna for Millimeter Wave Applications
Bonato, Marta	Computational Assessment of RF Exposure Levels due to 5G Mobile Phones Human RF-EMF Exposure Assessment for a Wearable Device by Stochastic Dosimetry
Bonelli, Francesco	Refinement of a Microwave Needle Applicator for Cancer Therapy via Metamaterials
Bonello, Julian	Techniques for temperature-dependent dielectric measurements: a review.
Boria, Vicente E.	Multipactor Analysis by Exploiting Kadane's Method
Bosi, Gianni	mm-Wave GaN HEMT Technology: Advances, Experiments, and Analysis
Bouamra, Wahida	Design of a Textile AMC-backed Antenna for Wearable applications
Boulmalf, Mohammed	Research gaps and trends in Radio Frequency Identification: Scoping review
Bourdel, Sylvain	Millimeter-wave Integrated SWO Based on Slow Wave Resonators
Bouya, Mohsine	Solving the RFID network planning problem under the perturbation effect defined by a new probabilistic power-based model Research gaps and trends in Radio Frequency Identification: Scoping review
Bozzi, Maurizio	Design and Manufacturing of Microwave Components by 3D Printing
Brancaccio, Adriana	A Single-Snapshot MUSIC Algorithm for ADAS Radar Processing
Brookes, Jeremy	Low Power Secure Backscatter Communication Techniques Exploring Ambient Signals
Bruno, Cristian	Temperature-sensitive experimental medical treatments with solid-state microwave generator
Buesa-Zubiria, Ana	On the Attenuation Constant Calculation in Periodic Transmission Media
Burghignoli, Paolo	Design of a Tunable THz 1-D Leaky-Wave Antenna based on Nematic Liquid Crystals Magnetic Shielding of a Thick Circular Conductive Disk Against a Coaxial Current Loop
Butts, L.	An Amplified W-Band Radar A SFCW K-Band Radar Modified for LTCC
Bösch, Wolfgang	A Simple Design Pattern for T4R Calibration Method
C
Caicedo Mejllones, Steven	Phased Array Design for Bounded-Power Consumption Onboard Spacecraft Substrate Integrated Waveguide Components on Alumina for E-band Applications
Calignano, Flaviana	3D-Printing of Antenna-Feed Components for Space Applications
Camarchia, Vittorio	Compact GaN-based Stacked Cells for 5G Applications at 26 GHz
Campobello, Giuseppe	Microwave Resonator for Humidity Detection Applications: A Comparative Analysis between ANNs and Lorentzian Fitting Method
Canicattì, Eliana	Dielectric Characterization Improvement of Biopsy Samples Via a Coated Open-Ended Coaxial Probe
Cankaya Akoglu, Busra	X-band Cascode LNA with Bias-invariant Noise Figure using 0.15 µm GaN-on-SiC Technology
Cano, Juan Luis	In-Lab Calibration of Single TE21 Monopulse Tracking Systems
Capozzoli, Amedeo	Dimensioning flat, rectangular equivalent radiators
Cardillo, Emanuele	Multi-Frequency Analysis of Microwave and Millimeter-Wave Radars for Ship Collision Avoidance
Castro, Nelson	3D-printed topologies for microwave and millimeter wave applications
Casula, G. Andrea	A flexible narrowband multiresonator for UHF RFID chipless tag
Casula, Giovanni Andrea	Electromagnetic Evaluation of Conductive and Dielectric Thermoplastic Materials Suitable for Designing Fully-3D-Printable RF Devices
Catarinucci, Luca	Electromagnetic Evaluation of Conductive and Dielectric Thermoplastic Materials Suitable for Designing Fully-3D-Printable RF Devices
Cavagnaro, Marta	Human Body Exposure to a Vehicular Antenna: a Numerical Study in a Realistic Military Scenario
Cayoren, Mehmet	Effects of Calibration Process on Complex Dielectric Permittivity Measurements with Open-Ended Coaxial Probes
Ceccato, Gabriele	In-Lab Calibration of Single TE21 Monopulse Tracking Systems
Celozzi, Salvatore	Magnetic Shielding of a Thick Circular Conductive Disk Against a Coaxial Current Loop
Centurelli, Francesco	Characterization-oriented design of E-band Variable-Gain Amplifiers in BiCMOS technology
Cervera, Raul	Multipactor Analysis by Exploiting Kadane's Method
Chakraborty, Ayona	Centrally Corrugated Cross-Coupled Wide Stopband Folded Bandpass Filter with Spurline Loaded Multi Loop Hexagram Shaped Printed Antennas for Multifrequency Communication
Chakraborty, Samik	Loaded Multi Loop Hexagram Shaped Printed Antennas for Multifrequency Communication
Chaloun, Tobias	Preliminary results on a compact duplexer design for K/Ka-Band SatCom on the Move User Terminals
Chatterjee, Sayan	Centrally Corrugated Cross-Coupled Wide Stopband Folded Bandpass Filter with Spurline Loaded Multi Loop Hexagram Shaped Printed Antennas for Multifrequency Communication
Chaudhry, Kauser	Cardiff Model Utilization for Predicting the Response of Multiple-Input Power Amplifiers
Chen, Zhijiao	3D Printed Millimeter wave Antenna Integrated into a Ring for 5G Applications
Chiaramello, Emma	Computational Assessment of RF Exposure Levels due to 5G Mobile Phones Human RF-EMF Exposure Assessment for a Wearable Device by Stochastic Dosimetry
Chietera, Francesco Paolo	Electromagnetic Evaluation of Conductive and Dielectric Thermoplastic Materials Suitable for Designing Fully-3D-Printable RF Devices
Chmielak, Bartos	Photonic Beamforming for EO and Telecom Applications
Ciallella, Tino	Human Body Exposure to a Vehicular Antenna: a Numerical Study in a Realistic Military Scenario
Ciccognani, Walter	Characterization-oriented design of E-band Variable-Gain Amplifiers in BiCMOS technology
Cilia, Federico	Techniques for temperature-dependent dielectric measurements: a review.
Clendinning, Sarah	Understanding the Dispersion Diagrams of Two-Dimensional Supercells
Colantonio, Paolo	GaN Stacked Cells for Power Applications in K-Band: A Comparative Study
Colella, Micol	Human Body Exposure to a Vehicular Antenna: a Numerical Study in a Realistic Military Scenario
Colella, Riccardo	Electromagnetic Evaluation of Conductive and Dielectric Thermoplastic Materials Suitable for Designing Fully-3D-Printable RF Devices
Colzani, Alberto	SiGe BiCMOS building blocks for a K/Ka-band flexible phased array system for SatCom applications
Concaro, Filippo	Comparison between Milling and Wire Erosion for Manufacturing All-Metal High-Pass Dichroic Mirrors
Contreres, Romain	Dual-Band, Dual-polarized 16-Slot Continuous Transverse Stub Array for SatCom Applications
Costa, Filippo	Radio Frequency Identification and Sensing at the Additive Manufacturing Crosslab
Costa, Jorge	Assessing different monoblock dielectric implementations of a low profile beam steering Transmitarray for 3D printing
Costanzo, Alessandra	A novel Hexagonal Excitation for a Multi-Layer Wearable Miniaturized Antenna Battery-free RF/Microwave Systems
Crupi, Giovanni	Microwave Resonator for Humidity Detection Applications: A Comparative Analysis between ANNs and Lorentzian Fitting Method mm-Wave GaN HEMT Technology: Advances, Experiments, and Analysis
Curcio, Claudio	Dimensioning flat, rectangular equivalent radiators
D
D'Agostino, Francesco	Evaluation of the Far Field Radiated by a Flat AUT from Non-Redundant Near-Field Bi-Polar Samples
D'Orazio, Antonella	Dual band flexible Planar Inverted-F antenna for Internet of Healthcare Things applications Fabrication of a Flexible Film Bulk Acoustic Resonator for Wireless Sensor Networks
Da R��, Pietro	Design and Planning of Static and Reconfigurable EM Skins for Smart Electromagnetic Environments
Dagdeviren, Birkan	Low Sidelobe Level Antenna Array with Amplitude Tapering
Das, Tarun Kumar	Centrally Corrugated Cross-Coupled Wide Stopband Folded Bandpass Filter with Spurline
de Marco, Raffaele	Phased arrays based on hybrid clusters
De Marzi, Simone	GaN Stacked Cells for Power Applications in K-Band: A Comparative Study
de Meis, Marco	Human Body Exposure to a Vehicular Antenna: a Numerical Study in a Realistic Military Scenario
De Nicolo, Tommaso	Temperature-sensitive experimental medical treatments with solid-state microwave generator
de Sagazan, Olivier	High-Gain Luneburg Lens on COC Substrate for 300-GHz Applications
De Soricellis, Mirko	Photonic Beamforming for EO and Telecom Applications
De Vittorio, Massimo	Dual band flexible Planar Inverted-F antenna for Internet of Healthcare Things applications Fabrication of a Flexible Film Bulk Acoustic Resonator for Wireless Sensor Networks
Defrance, Nicolas	SiGe Circuits for Future LEO Constellations
Del Mastro, Michele	Mutli-layer CTS antenna array in PCB technology for SatCom applications
Dell'Aversano, Angela	A Single-Snapshot MUSIC Algorithm for ADAS Radar Processing
Delmonte, Nicolò	Design and Manufacturing of Microwave Components by 3D Printing
Demirbas, Gun	Low Sidelobe Level Antenna Array with Amplitude Tapering
Di Donato, Loreto	Bessel Beam Scattering Evaluation by PEC Targets and Innovative Launcher Design Criteria
Di Meo, Simona	Techniques for temperature-dependent dielectric measurements: a review. Introduction to microwave radar imaging – case of study: breast cancer detection
Di Modugno, Nicola	Temperature-sensitive experimental medical treatments with solid-state microwave generator
Di Modugno, Rocco	Temperature-sensitive experimental medical treatments with solid-state microwave generator
Diaferia, Antonio	Design of Electromagnetic Shielding for Food Pasteurization via Corrugated Waveguide and Graphite Rings
Diallo, Aliou	Superdirective Array Antennas with Pattern Radiation Reconfigurable for Wi-Fi box
Diallo, Kadidiatou	Miniaturized PIFA RFID UHF Tag Antenna for Metal Surface Applications
Dickmann, Jürgen	Calibration and Signal Processing of Polarimetric Radar Data in Automotive Applications
Dilman, Ismail	Effects of Calibration Process on Complex Dielectric Permittivity Measurements with Open-Ended Coaxial Probes
Dimech, Evan Joe	Techniques for temperature-dependent dielectric measurements: a review.
Dimitrijevic, Tijana	TLM Mesh Impact on Textile Antenna Modelling
Ding, Yuan	Low Power Secure Backscatter Communication Techniques Exploring Ambient Signals A Fine-grained Modulation Technology for ZigBee Backscatter Communication
Dioum, Ibra	Miniaturized PIFA RFID UHF Tag Antenna for Metal Surface Applications Superdirective Array Antennas with Pattern Radiation Reconfigurable for Wi-Fi box
Donato, Nicola	Microwave Resonator for Humidity Detection Applications: A Comparative Analysis between ANNs and Lorentzian Fitting Method
Doncov, Nebojsa	TLM Mesh Impact on Textile Antenna Modelling
Donelli, Massimo	Integration of Modulated Scattering Technique (MST) tags with IoT devices
Dossi, Laura	Computational Assessment of RF Exposure Levels due to 5G Mobile Phones
Drexler, Petr	Tubular resonant networks creating a homogeneous magnetic field via different resonance modes
Ducournau, Guillaume	High Data Rate OOK Wireless Link at 300 GHz Band through Metasurface-based Filters: Analysis, Design, and Experiment
Ducournau, Guillaume	SiGe Circuits for Future LEO Constellations
Dufossee, Melody	Possible role of autophagy in in vitro radiofrequency-induced adaptive response
Durukan, Sami	CMOS Negative Impedance Converter Circuit with the Elimination of Parasitic Gate-Source Capacitance
E
Ejaz, Malik Ehsan	A Realizability Test as Applied on the Generated Source/Load-Pull Data A Unified Real Frequency Technique for the Solution to Broadband Matching Problems A Numerical Procedure to Determine the Power Intake/Delivery Capacity of a GaN RF Power Transistor over Broadband
El Geziry, Mahmoud	Radio Frequency Identification and Sensing at the Additive Manufacturing Crosslab
El Khamlichi, Mohamed	Concentration Measurements of Ethanol in Water Based on RFID-UHF Flexible Sensor for Sterilization Against SARS-CoV Flexible and Low-cost RFID-UHF Tag Antennas for Remote Blood Tracking Applications
El Mrabet, Otman	Flexible and Low-cost RFID-UHF Tag Antennas for Remote Blood Tracking Applications
El Mrabet, Otman	Concentration Measurements of Ethanol in Water Based on RFID-UHF Flexible Sensor for Sterilization Against SARS-CoV
El Yassini, Khalid	Research gaps and trends in Radio Frequency Identification: Scoping review
El-Ghazaly, S.	An Amplified W-Band Radar A SFCW K-Band Radar Modified for LTCC
Ennasar, Mohammed Ali	Concentration Measurements of Ethanol in Water Based on RFID-UHF Flexible Sensor for Sterilization Against SARS-CoV Flexible and Low-cost RFID-UHF Tag Antennas for Remote Blood Tracking Applications
Essaaidi, Mohamed	Concentration Measurements of Ethanol in Water Based on RFID-UHF Flexible Sensor for Sterilization Against SARS-CoV
Esteban, Jaime	On the Attenuation Constant Calculation in Periodic Transmission Media
Ettorre, Mauro	Mutli-layer CTS antenna array in PCB technology for SatCom applications Dual-Band, Dual-polarized 16-Slot Continuous Transverse Stub Array for SatCom Applications
Ettorre, Mauro	High-Gain Luneburg Lens on COC Substrate for 300-GHz Applications
F
Falcone, Francisco	CSRR-based miniaturized dual band filter in SIW multilayer structure for wifi and 5G NR FR1 applications
Faouri, Yanal	Side-Edge Dual-Band Antenna for 5G and Wi-Fi 6 Applications Compound Reconfigurable Bio-Inspired Antenna Design
Farhat, Iman	Techniques for temperature-dependent dielectric measurements: a review.
Farina, Marco	Generalized Thru-Reflect-Line Calibration for the Measurement of Waveguide Devices up to the third Harmonic: First Results
Farrugia, Lourdes	Dielectric characterization of biological tissues Techniques for temperature-dependent dielectric measurements: a review.
Fasano, Antonella	Refinement of a Microwave Needle Applicator for Cancer Therapy via Metamaterials
Felicio, Joao	Assessing different monoblock dielectric implementations of a low profile beam steering Transmitarray for 3D printing
Fernandes, Carlos	Assessing different monoblock dielectric implementations of a low profile beam steering Transmitarray for 3D printing
Ferrara, Flaminio	Evaluation of the Far Field Radiated by a Flat AUT from Non-Redundant Near-Field Bi-Polar Samples
Ferrari, Philippe	BiCMOS Rat-Race Coupler Based on Slow-Wave CPS Transmission lines for 120 GHz Applications
Ferraro, Antonio	High Data Rate OOK Wireless Link at 300 GHz Band through Metasurface-based Filters: Analysis, Design, and Experiment
Ferro, Luigi	Multi-Frequency Analysis of Microwave and Millimeter-Wave Radars for Ship Collision Avoidance
Fikioris, George	Modeling of Cylindrical Configurations Coated by Monolayer Graphene with a Modified Method of Auxiliary Sources
Fiocchi, Serena	Computational Assessment of RF Exposure Levels due to 5G Mobile Phones Human RF-EMF Exposure Assessment for a Wearable Device by Stochastic Dosimetry
Fiore, Marco	Temperature-sensitive experimental medical treatments with solid-state microwave generator
Fischer, Boris	Homogenization and Dispersion Properties of Glide-Symmetric Corrugated Metasurfaces
Fischer, Michael	Preliminary results on a compact duplexer design for K/Ka-Band SatCom on the Move User Terminals
Fontana, Nunzia	Dielectric Characterization Improvement of Biopsy Samples Via a Coated Open-Ended Coaxial Probe
Fonte, Alessandro	SiGe BiCMOS building blocks for a K/Ka-band flexible phased array system for SatCom applications FLEXCOM design approach (FLEXCOM EU Project)
Francesco, Soldovieri	Environmental exposure to electromagnetic fields: A geo-referenced Cadaster of the Radiofrequency sources in Basilicata Region
Francione, Vito Vincenzo	Wideband antipodal Vivaldi antenna with metalenses for GPR applications
Franzese, Aniello	Ultracompact Inverted Input Delay Doherty Power Amplifier with a Novel Power Divider for 5G mm-Wave
Freni, Angelo	60-GHz-band OAM Multiplexing with a RLSA that Simultaneously Generates Three OAM modes
Freni, Angelo	Optimization-based design of isoflux reflectarray
Fumagalli, Matteo	SiGe BiCMOS building blocks for a K/Ka-band flexible phased array system for SatCom applications
Furxhi, Stela	GaN Stacked Cells for Power Applications in K-Band: A Comparative Study
Fuscaldo, Walter	Design of a Tunable THz 1-D Leaky-Wave Antenna based on Nematic Liquid Crystals High Data Rate OOK Wireless Link at 300 GHz Band through Metasurface-based Filters: Analysis, Design, and Experiment
G
Gadringer, Michael	A Simple Design Pattern for T4R Calibration Method
Galli, Alessandro	Design of a Tunable THz 1-D Leaky-Wave Antenna based on Nematic Liquid Crystals
Gallucci, Silvia	Computational Assessment of RF Exposure Levels due to 5G Mobile Phones Human RF-EMF Exposure Assessment for a Wearable Device by Stochastic Dosimetry
Gao, Steven	3D Printed Millimeter wave Antenna Integrated into a Ring for 5G Applications Screen-Printed FSS Plasterboard for Wireless Indoor Applications
Gasperini, Daniela	Radio Frequency Identification and Sensing at the Additive Manufacturing Crosslab
Gennarelli, Claudio	Evaluation of the Far Field Radiated by a Flat AUT from Non-Redundant Near-Field Bi-Polar Samples
Genovesi, Simone	Radio Frequency Identification and Sensing at the Additive Manufacturing Crosslab
Gharsallah, Ali	Design of compact size dual-band smartwatch antenna for biomedical applications
Giacometti, Riccardo	Automotive Radar Millimeter Wave Microstrip Patch Array Antenna Simulations Automotive Radar Millimeter Wave Microstrip patch Array Simulations
Giannini, Andrea	Phased Array Design for Bounded-Power Consumption Onboard Spacecraft
Giglio, Elena	Research In Outer Space: Facilitating access to space supporting scientific and technological advancement
Giofrè, Rocco	mm-Wave GaN HEMT Technology: Advances, Experiments, and Analysis GaN Stacked Cells for Power Applications in K-Band: A Comparative Study
Giusti, Federico	Wide-Angle Anomalous Refraction Using Efficient Surface Field Optimization for Different Polarizations
Gong, Wei	A Fine-grained Modulation Technology for ZigBee Backscatter Communication
Gonzalez, Pablo	Multipactor Analysis by Exploiting Kadane's Method
González-Ovejero, David	High-Gain Luneburg Lens on COC Substrate for 300-GHz Applications
Gorur, Ali Kursad	Design of a Novel Dual-Wideband Filtenna
Goussetis, George	Low Power Secure Backscatter Communication Techniques Exploring Ambient Signals
Grande, Marco	Dual band flexible Planar Inverted-F antenna for Internet of Healthcare Things applications Fabrication of a Flexible Film Bulk Acoustic Resonator for Wireless Sensor Networks
Greco, Francesco	Design of an in-package transmit-array for automotive applications:preliminary results
Guerriero, Rocco	Evaluation of the Far Field Radiated by a Flat AUT from Non-Redundant Near-Field Bi-Polar Samples
Gugliandolo, Giovanni	Microwave Resonator for Humidity Detection Applications: A Comparative Analysis between ANNs and Lorentzian Fitting Method
Guglielmi, Marco	Generalized Thru-Reflect-Line Calibration for the Measurement of Waveguide Devices up to the third Harmonic: First Results
Gupta, Bhaskar	Centrally Corrugated Cross-Coupled Wide Stopband Folded Bandpass Filter with Spurline Loaded Multi Loop Hexagram Shaped Printed Antennas for Multifrequency Communication
Gurhan, Engin	Low Sidelobe Level Antenna Array with Amplitude Tapering
H
Haibi, Achraf	Research gaps and trends in Radio Frequency Identification: Scoping review
Hatab, Ziad	A Simple Design Pattern for T4R Calibration Method
Heberling, Dirk	Calibration and Signal Processing of Polarimetric Radar Data in Automotive Applications
Hinojosa, Juan	Flexible and Low-cost RFID-UHF Tag Antennas for Remote Blood Tracking Applications
Hirokawa, Jiro	60-GHz-band OAM Multiplexing with a RLSA that Simultaneously Generates Three OAM modes
Hoffmann, Martin	Silicon based Metamaterials for Dielectric Waveguides in the THz Range
Hong, Jiasheng	K/Ka-Band MIMO Beamforming Phased Antenna Array with Multilayer Substrate Integrated Coaxial Line Feeding Network
Hong, Wonbin	mmWave antenna systems with self-correction feeding networks for 5G and radar applications
Huggard, Peter	Photonic Beamforming for EO and Telecom Applications
I
Imperato, Francesca	Design of a Tunable THz 1-D Leaky-Wave Antenna based on Nematic Liquid Crystals
Isernia, Tommaso	Advances in MRI based Electrical Properties Tomography: a Comparison between Physics-supported Learning Approaches
Issa, Saeed	Compound Reconfigurable Bio-Inspired Antenna Design
Izzi, Francesco	Environmental exposure to electromagnetic fields: A geo-referenced Cadaster of the Radiofrequency sources in Basilicata Region
J
Jamshed, Muhammad Ali	A novel Hexagonal Excitation for a Multi-Layer Wearable Miniaturized Antenna
Jarauta, Eduardo	CSRR-based miniaturized dual band filter in SIW multilayer structure for wifi and 5G NR FR1 applications
John William, Nobel	Jammer Detection in Vehicular V2X Networks
Jokovic, Jugoslav	TLM Mesh Impact on Textile Antenna Modelling
Joof, Sulayman	Effects of Calibration Process on Complex Dielectric Permittivity Measurements with Open-Ended Coaxial Probes
Jun, Sung	3D Printed Millimeter wave Antenna Integrated into a Ring for 5G Applications
Juřík, Karel	Tubular resonant networks creating a homogeneous magnetic field via different resonance modes
K
Kamo, Bexhet	RCS analysis on ultra-wideband sinuous antenna with elliptical slots
Karami-Horestani, Amirhossein	A Hybrid Time/Frequency Domain Near-Field Chipless-RFID system
Khouma, Mamadou Mansour	Superdirective Array Antennas with Pattern Radiation Reconfigurable for Wi-Fi box
Kilinc, Sedat	A Realizability Test as Applied on the Generated Source/Load-Pull Data A Unified Real Frequency Technique for the Solution to Broadband Matching Problems A Numerical Procedure to Determine the Power Intake/Delivery Capacity of a GaN RF Power Transistor over Broadband
Kishk, Ahmed	Millimeter-Wave Antennas Directivity Enhancement and Feeding Network Reduction Techniques
Kobayashi, Kazuya	Diffraction by a Slit in a Thin Material Screen
Kocaoglu, Bahadir Can	Low Sidelobe Level Antenna Array with Amplitude Tapering
Kouki, Adel	A new tunable frequency 4x1 MIMO antennas loaded with liquid crystal dedicated for 5G and WiGig applications
Kouroublakis, Minas	Modeling of Cylindrical Configurations Coated by Monolayer Graphene with a Modified Method of Auxiliary Sources
Krayani, Ali	Jammer Detection in Vehicular V2X Networks
L
La Scaleia, Giuseppe	Environmental exposure to electromagnetic fields: A geo-referenced Cadaster of the Radiofrequency sources in Basilicata Region
Lacatena, Alexandra	Design of Electromagnetic Shielding for Food Pasteurization via Corrugated Waveguide and Graphite Rings
Lamacchia, Claudio Maria	Continuous microwave pilot plant for almond disinfestation: preliminary tests
Lamanna, Leonardo	Fabrication of a Flexible Film Bulk Acoustic Resonator for Wireless Sensor Networks
Lampignano, Vito	Refinement of a Microwave Needle Applicator for Cancer Therapy via Metamaterials
Laneve, Dario	Design of Electromagnetic Shielding for Food Pasteurization via Corrugated Waveguide and Graphite Rings
Lapenna, Vincenzo	Environmental exposure to electromagnetic fields: A geo-referenced Cadaster of the Radiofrequency sources in Basilicata Region
Latarch, Lassaad	Monitoring freshness of Tommy Mango Fruit with an RFID Tag
Latrach, Lassaad	A new tunable frequency 4x1 MIMO antennas loaded with liquid crystal dedicated for 5G and WiGig applications Printed Hexagonal antenna with Dual Reconfigurable Wide Rejected Bands
Leone, Alessandro	Continuous microwave pilot plant for almond disinfestation: preliminary tests
Liberti, Micaela	Human Body Exposure to a Vehicular Antenna: a Numerical Study in a Realistic Military Scenario
Limiti, Ernesto	Characterization-oriented design of E-band Variable-Gain Amplifiers in BiCMOS technology
Linsalata, Francesco	A Joint Radar- and GPS- aided Beam Management at Infrastructure
Lira, Tomas	3D-printed topologies for microwave and millimeter wave applications
Liseno, Angelo	Dimensioning flat, rectangular equivalent radiators
Lo Forti, Daniele	Photonic Beamforming for EO and Telecom Applications
Lobascio, Fabio	Temperature-sensitive experimental medical treatments with solid-state microwave generator
Loconsole, Antonella Maria	Wideband antipodal Vivaldi antenna with metalenses for GPR applications Refinement of a Microwave Needle Applicator for Cancer Therapy via Metamaterials Design of Electromagnetic Shielding for Food Pasteurization via Corrugated Waveguide and Graphite Rings
Lombardi, Renato	Millimeter-wave and sub-TeraHz technology research trends to meet requirements of 5G and beyond – An industry view
Longhi, Michela	Metasurface Coatings Enabling Scattering, Frequency, and Radiation Tunability for Next-Generation Antenna Systems Optimal Design of Huygens Metasurfaces for Oblique Incidence through a Microwave Network Approach
Lovat, Giampiero	Magnetic Shielding of a Thick Circular Conductive Disk Against a Coaxial Current Loop
Lucido, Mario	Full-wave Validation of Plane Waves Model for Numerical Dosimetry in Reverberation Chambers
Luini, Lorenzo	Orbital and Spatial Diversity for Next Generation Large NGSO Satellite Constellations
Lumia, Mauro	3D-Printing of Antenna-Feed Components for Space Applications
López-Oliver, Enrique	Stereolithography Additive Manufacturing of Overmoded Spherical Filters
M
M. Purushothama, Jayakrishnan	Low Power Secure Backscatter Communication Techniques Exploring Ambient Signals
Machac, Jan	Printed Hexagonal antenna with Dual Reconfigurable Wide Rejected Bands
Maci, Stefano	Wide-Angle Anomalous Refraction Using Efficient Surface Field Optimization for Different Polarizations
Magarini, Maurizio	A Joint Radar- and GPS- aided Beam Management at Infrastructure
Maggiora, Riccardo	Enabling Technologies for Imaging Automotive Radar
Mahmoud, Adham	High-Gain Luneburg Lens on COC Substrate for 300-GHz Applications Mutli-layer CTS antenna array in PCB technology for SatCom applications
Maimouni, Mustapha	Solving the RFID network planning problem under the perturbation effect defined by a new probabilistic power-based model
Maio, Donato	Environmental exposure to electromagnetic fields: A geo-referenced Cadaster of the Radiofrequency sources in Basilicata Region
Maisto, Maria Antonia	A Single-Snapshot MUSIC Algorithm for ADAS Radar Processing
Malignaggi, Andrea	Ultracompact Inverted Input Delay Doherty Power Amplifier with a Novel Power Divider for 5G mm-Wave
Manara, Giuliano	Radio Frequency Identification and Sensing at the Additive Manufacturing Crosslab
Mandija, Stefano	Advances in MRI based Electrical Properties Tomography: a Comparison between Physics-supported Learning Approaches
Manekiya, Mohammedhusen	Integration of Modulated Scattering Technique (MST) tags with IoT devices
Manfedi, Diego	3D-Printing of Antenna-Feed Components for Space Applications
Mantooth, Alan	An Amplified W-Band Radar A SFCW K-Band Radar Modified for LTCC
Manzoni, Marco	SAR Imaging in automotive scenarios
Marasco, Ilaria	Dual band flexible Planar Inverted-F antenna for Internet of Healthcare Things applications Fabrication of a Flexible Film Bulk Acoustic Resonator for Wireless Sensor Networks
Marcenaro, Lucio	Jammer Detection in Vehicular V2X Networks
Marchetti, Matteo	Comparison between Milling and Wire Erosion for Manufacturing All-Metal High-Pass Dichroic Mirrors
Marchi, Giada	Integration of Modulated Scattering Technique (MST) tags with IoT devices
Margalef-Rovira, Marc	Integrated Characterization Solutions for ICs Beyond 100 GHz SiGe Circuits for Future LEO Constellations
Marinkovic, Zlatica	Microwave Resonator for Humidity Detection Applications: A Comparative Analysis between ANNs and Lorentzian Fitting Method
Marrocco, Valeria	Refinement of a Microwave Needle Applicator for Cancer Therapy via Metamaterials
Martin, Ferran	A Hybrid Time/Frequency Domain Near-Field Chipless-RFID system
Martin Iglesias, Petronilo	Generalized Thru-Reflect-Line Calibration for the Measurement of Waveguide Devices up to the third Harmonic: First Results
Martini, Enrica	Wide-Angle Anomalous Refraction Using Efficient Surface Field Optimization for Different Polarizations
Masotti, Diego	A novel Hexagonal Excitation for a Multi-Layer Wearable Miniaturized Antenna
Massa, Andrea	Doing Real the Smart EM Environment (SEE) – Perspectives, Recipes, and Future Trends Design and Planning of Static and Reconfigurable EM Skins for Smart Electromagnetic Environments
Massa, Rita	Full-wave Validation of Plane Waves Model for Numerical Dosimetry in Reverberation Chambers
Massaccesi, Andrea	Beam steering mm-waves dielectric-only reflectarray Optimization-based design of isoflux reflectarray
Matos, Sergio	Assessing different monoblock dielectric implementations of a low profile beam steering Transmitarray for 3D printing
Mazzinghi, Agnese	60-GHz-band OAM Multiplexing with a RLSA that Simultaneously Generates Three OAM modes Optimization-based design of isoflux reflectarray
Mazzucco, Christian	A Joint Radar- and GPS- aided Beam Management at Infrastructure SAR Imaging in automotive scenarios
McGhee, Jack	Fabricating 3D Metamaterials via Field’s Metal Injection
Mediavilla, Angel	In-Lab Calibration of Single TE21 Monopulse Tracking Systems
Meerbothe, Thierry	Advances in MRI based Electrical Properties Tomography: a Comparison between Physics-supported Learning Approaches
Meliadò, Ettore Flavio	Advances in MRI based Electrical Properties Tomography: a Comparison between Physics-supported Learning Approaches
Mengual, Teresa	Photonic Beamforming for EO and Telecom Applications
Mersani, Ameni	Design of a Textile AMC-backed Antenna for Wearable applications
Mesa, Francisco	Understanding the Dispersion Diagrams of Two-Dimensional Supercells
Mescia, Luciano	Continuous microwave pilot plant for almond disinfestation: preliminary tests
Migliozzi, Massimo	Evaluation of the Far Field Radiated by a Flat AUT from Non-Redundant Near-Field Bi-Polar Samples
Miquel, Cesar	Multipactor Analysis by Exploiting Kadane's Method
Mizmizi, Marouan	A Joint Radar- and GPS- aided Beam Management at Infrastructure
Monerris, Oscar	Multipactor Analysis by Exploiting Kadane's Method
Monorchio, Agostino	Dielectric Characterization Improvement of Biopsy Samples Via a Coated Open-Ended Coaxial Probe
Monti, Alessio	Metasurface Coatings Enabling Scattering, Frequency, and Radiation Tunability for Next-Generation Antenna Systems Optimal Design of Huygens Metasurfaces for Oblique Incidence through a Microwave Network Approach
Monti Guarnieri, Andrea	SAR Imaging in automotive scenarios
Montisci, Giorgio	A flexible narrowband multiresonator for UHF RFID chipless tag Electromagnetic Evaluation of Conductive and Dielectric Thermoplastic Materials Suitable for Designing Fully-3D-Printable RF Devices
Moreno, David	Photonic Beamforming for EO and Telecom Applications
Morini, Antonio	Generalized Thru-Reflect-Line Calibration for the Measurement of Waveguide Devices up to the third Harmonic: First Results
Moscato, Stefano	Phased Array Design for Bounded-Power Consumption Onboard Spacecraft Substrate Integrated Waveguide Components on Alumina for E-band Applications
Mulloni, Viviana	Integration of Modulated Scattering Technique (MST) tags with IoT devices
Muntoni, Giacomo	Electromagnetic Evaluation of Conductive and Dielectric Thermoplastic Materials Suitable for Designing Fully-3D-Printable RF Devices
Mustacchio, Carmine	E-Band SIW-fed aperture coupled Magneto-Electric Dipole Antenna for 5G Backhauling systems Preliminary results on a compact duplexer design for K/Ka-Band SatCom on the Move User Terminals A wideband aperture coupled Rhomboid MagnetoElectric Dipole Antenna for Millimeter Wave Applications Characterization-oriented design of E-band Variable-Gain Amplifiers in BiCMOS technology
N
Naftaly, Mira	Broadband terahertz measurements of optical properties of materials
Nagasaka, Takashi	Diffraction by a Slit in a Thin Material Screen
Naoui, Seifeddine	Monitoring freshness of Tommy Mango Fruit with an RFID Tag
Nasri, Abdelkhalek	Bowtie Antenna Performance Optimization using Metamaterial and Characteristic Mode Analysis
Nawaz, Muhammad Imran	X-band Cascode LNA with Bias-invariant Noise Figure using 0.15 µm GaN-on-SiC Technology
Nazlıbilek, Sedat	GaN-based Single Stage Low Noise Amplifier for X-band Applications
Negra, Renato	Ultracompact Inverted Input Delay Doherty Power Amplifier with a Novel Power Divider for 5G mm-Wave
Nicoli, Monica	SAR Imaging in automotive scenarios
Niro, Giovanni	Dual band flexible Planar Inverted-F antenna for Internet of Healthcare Things applications Fabrication of a Flexible Film Bulk Acoustic Resonator for Wireless Sensor Networks
Njogu, Peter	3D Printed Millimeter wave Antenna Integrated into a Ring for 5G Applications Screen-Printed FSS Plasterboard for Wireless Indoor Applications
Nurellari, Edmond	A Realizability Test as Applied on the Generated Source/Load-Pull Data A Unified Real Frequency Technique for the Solution to Broadband Matching Problems A Numerical Procedure to Determine the Power Intake/Delivery Capacity of a GaN RF Power Transistor over Broadband
O
Occello, Olivier	mm-Wave 2 and 3D Passives Circuits, Miniaturization, and Propositions for Reliable an Cheap Test process
Oldoni, Matteo	Phased Array Design for Bounded-Power Consumption Onboard Spacecraft Substrate Integrated Waveguide Components on Alumina for E-band Applications
Oliveri, Giacomo	Design and Planning of Static and Reconfigurable EM Skins for Smart Electromagnetic Environments
Osman, Lotfi	Design of a Textile AMC-backed Antenna for Wearable applications
Oufaska, Kenza	Research gaps and trends in Radio Frequency Identification: Scoping review
Ouya, Samuel	Superdirective Array Antennas with Pattern Radiation Reconfigurable for Wi-Fi box
Ozoguz, Serdar	A Realizability Test as Applied on the Generated Source/Load-Pull Data A Unified Real Frequency Technique for the Solution to Broadband Matching Problems A Numerical Procedure to Determine the Power Intake/Delivery Capacity of a GaN RF Power Transistor over Broadband
P
Palamutçuogullari, Osman	CMOS Negative Impedance Converter Circuit with the Elimination of Parasitic Gate-Source Capacitance
Panariello, Gaetano	Analytically Regularized Evaluation of the Wakefield of a Particle Travelling through a Plane Conducting Ring Full-wave Validation of Plane Waves Model for Numerical Dosimetry in Reverberation Chambers
Paonessa, Fabio	3D-Printing of Antenna-Feed Components for Space Applications
Parazzini, Marta	Computational Assessment of RF Exposure Levels due to 5G Mobile Phones Human RF-EMF Exposure Assessment for a Wearable Device by Stochastic Dosimetry
Paredes, Ferran	A Hybrid Time/Frequency Domain Near-Field Chipless-RFID system
Pascazio, Giuseppe	Refinement of a Microwave Needle Applicator for Cancer Therapy via Metamaterials
Pasian, Marco	Comparison between Milling and Wire Erosion for Manufacturing All-Metal High-Pass Dichroic Mirrors Techniques for temperature-dependent dielectric measurements: a review.
Patrizi, Roberto	Human Body Exposure to a Vehicular Antenna: a Numerical Study in a Realistic Military Scenario
Pavone, Santi Concetto	Bessel Beam Scattering Evaluation by PEC Targets and Innovative Launcher Design Criteria
Pelorossi, Fabio	Comparison between Milling and Wire Erosion for Manufacturing All-Metal High-Pass Dichroic Mirrors
Penirschke, Andreas	A Double Mirror Stub Design of Broadband Planar Bias Tee for System on Chip Integration
Perregrini, Luca	Comparison between Milling and Wire Erosion for Manufacturing All-Metal High-Pass Dichroic Mirrors Design and Manufacturing of Microwave Components by 3D Printing How to write a technical paper (and get it published) In-Lab Calibration of Single TE21 Monopulse Tracking Systems
Petit, John	Multipactor Analysis by Exploiting Kadane's Method
Peverini, Oscar Antonio	3D-Printing of Antenna-Feed Components for Space Applications
Pezzoli, Roberto	SatCom antenna requirements for small aircrafts
Piacibello, Anna	Compact GaN-based Stacked Cells for 5G Applications at 26 GHz
Piekarz, Ilona	Design and Manufacturing of Microwave Components by 3D Printing
Piqueras, Miguel Ángel	Photonic Beamforming for EO and Telecom Applications
Pirinoli, Paola	Beam steering mm-waves dielectric-only reflectarray Optimization-based design of isoflux reflectarray
Pirola, Marco	Compact GaN-based Stacked Cells for 5G Applications at 26 GHz
Pirrone, Daniele	High Data Rate OOK Wireless Link at 300 GHz Band through Metasurface-based Filters: Analysis, Design, and Experiment
Pizarro, Francisco	3D-printed topologies for microwave and millimeter wave applications
Podevin, Florence	BiCMOS Rat-Race Coupler Based on Slow-Wave CPS Transmission lines for 120 GHz Applications
Poeta, Loredana	Possible role of autophagy in in vitro radiofrequency-induced adaptive response
Popovic, Zoya	GaN MMICs for millimeter-wave front ends
Portosi, Vincenza	Wideband antipodal Vivaldi antenna with metalenses for GPR applications Refinement of a Microwave Needle Applicator for Cancer Therapy via Metamaterials Design of Electromagnetic Shielding for Food Pasteurization via Corrugated Waveguide and Graphite Rings
Potelon, Thomas	Mutli-layer CTS antenna array in PCB technology for SatCom applications
Poyanco, Jose Manuel	3D-printed topologies for microwave and millimeter wave applications
Prati, Claudio	SAR Imaging in automotive scenarios
Preu, Sascha	A Double Mirror Stub Design of Broadband Planar Bias Tee for System on Chip Integration
Priault, Muriel	Possible role of autophagy in in vitro radiofrequency-induced adaptive response
Prouzet-Mauleon, Valerie	Possible role of autophagy in in vitro radiofrequency-induced adaptive response
Prudenzano, Francesco	Wideband antipodal Vivaldi antenna with metalenses for GPR applications Refinement of a Microwave Needle Applicator for Cancer Therapy via Metamaterials Design of Electromagnetic Shielding for Food Pasteurization via Corrugated Waveguide and Graphite Rings
Q
Quaglia, Roberto	Cardiff Model Utilization for Predicting the Response of Multiple-Input Power Amplifiers
Quatela, Alessandro	Design of Electromagnetic Shielding for Food Pasteurization via Corrugated Waveguide and Graphite Rings
Quevedo-Teruel, Oscar	Understanding the Dispersion Diagrams of Two-Dimensional Supercells
R
Rabaani, Karima	Design of Microstrip Antenna for 5G Applications at 28 GHz
Rabhi, Rania	Design of compact size dual-band smartwatch antenna for biomedical applications
Raffo, Antonio	mm-Wave GaN HEMT Technology: Advances, Experiments, and Analysis
Rajo-Iglesias, Eva	Consideration in designing holey glided-symmetrical structures in gap waveguide 3D-printed topologies for microwave and millimeter wave applications
Rakipi, Alban	RCS analysis on ultra-wideband sinuous antenna with elliptical slots
Ramaccia, Davide	Optimal Design of Huygens Metasurfaces for Oblique Incidence through a Microwave Network Approach
Ramella, Chiara	Compact GaN-based Stacked Cells for 5G Applications at 26 GHz
Regazzoni, Carlo	Jammer Detection in Vehicular V2X Networks
Ribero, Jean-Marc	Design of a Textile AMC-backed Antenna for Wearable applications
Rinaldi, Luca	A Joint Radar- and GPS- aided Beam Management at Infrastructure
Riva, Carlo	Orbital and Spatial Diversity for Next Generation Large NGSO Satellite Constellations
Rizzi, Francesco	Dual band flexible Planar Inverted-F antenna for Internet of Healthcare Things applications Fabrication of a Flexible Film Bulk Acoustic Resonator for Wireless Sensor Networks
Rizzi, Marco	SAR Imaging in automotive scenarios
Roberto, Giuseppe	Wideband antipodal Vivaldi antenna with metalenses for GPR applications
Rocca, Paolo	Design and Planning of Static and Reconfigurable EM Skins for Smart Electromagnetic Environments
Rodini, Sandra	Radio Frequency Identification and Sensing at the Additive Manufacturing Crosslab
Rodriguez, Miguel	Multipactor Analysis by Exploiting Kadane's Method
Rolfes, Ilona	Silicon based Metamaterials for Dielectric Waveguides in the THz Range
Romeo, Stefania	Environmental exposure to electromagnetic fields: A geo-referenced Cadaster of the Radiofrequency sources in Basilicata Region Possible role of autophagy in in vitro radiofrequency-induced adaptive response
Roy, Saurav Kumar	Loaded Multi Loop Hexagram Shaped Printed Antennas for Multifrequency Communication
Ruiz-García, Jorge	High-Gain Luneburg Lens on COC Substrate for 300-GHz Applications
Russo, Ivan	SAR Imaging in automotive scenarios A Single-Snapshot MUSIC Algorithm for ADAS Radar Processing
S
Sabbah, Zaid	Compound Reconfigurable Bio-Inspired Antenna Design
Salucci, Marco	Design and Planning of Static and Reconfigurable EM Skins for Smart Electromagnetic Environments
Salvia, Vito	Environmental exposure to electromagnetic fields: A geo-referenced Cadaster of the Radiofrequency sources in Basilicata Region
Sammut, Charles V	Techniques for temperature-dependent dielectric measurements: a review.
Sanchez Cabello, Carlos	Consideration in designing holey glided-symmetrical structures in gap waveguide
Sanchís, Pablo	Photonic Beamforming for EO and Telecom Applications
Sannino, Anna	Possible role of autophagy in in vitro radiofrequency-induced adaptive response
Sansa, Imen	Bowtie Antenna Performance Optimization using Metamaterial and Characteristic Mode Analysis
Sanz-Izquierdo, Benito	3D Printed Millimeter wave Antenna Integrated into a Ring for 5G Applications Screen-Printed FSS Plasterboard for Wireless Indoor Applications
Sarr, Pape Waly	Miniaturized PIFA RFID UHF Tag Antenna for Metal Surface Applications
Sauleau, Ronan	High-Gain Luneburg Lens on COC Substrate for 300-GHz Applications Mutli-layer CTS antenna array in PCB technology for SatCom applications Dual-Band, Dual-polarized 16-Slot Continuous Transverse Stub Array for SatCom Applications
Sboui, Fakher	A new tunable frequency 4x1 MIMO antennas loaded with liquid crystal dedicated for 5G and WiGig applications
Scalise, Giuseppe	E-Band SIW-fed aperture coupled Magneto-Electric Dipole Antenna for 5G Backhauling systems
Scarfì, Maria Rosaria	Possible role of autophagy in in vitro radiofrequency-induced adaptive response
Schenkel, Francesca	Silicon based Metamaterials for Dielectric Waveguides in the THz Range
Schettino, Fulvio	Analytically Regularized Evaluation of the Wakefield of a Particle Travelling through a Plane Conducting Ring Full-wave Validation of Plane Waves Model for Numerical Dosimetry in Reverberation Chambers
Schmitt, Lisa	Silicon based Metamaterials for Dielectric Waveguides in the THz Range
Scigliano, Matteo	Photonic Beamforming for EO and Telecom Applications
Sevg, Levent	From engineering electromagnetics to electromagnetic engineering
Sewell, Phillip	Characterization of Flexible Interconnects
Sfar, Imen	Design of a Textile AMC-backed Antenna for Wearable applications
Shastri, Anshuman	Screen-Printed FSS Plasterboard for Wireless Indoor Applications
Shurdi, Olimpjon	RCS analysis on ultra-wideband sinuous antenna with elliptical slots
Silvestri, Lorenzo	Design and Manufacturing of Microwave Components by 3D Printing
Sipus, Zvonimir	Consideration in designing holey glided-symmetrical structures in gap waveguide
Smith, Adam	Screen-Printed FSS Plasterboard for Wireless Indoor Applications
Smith, Paul	Rigorous Approach to Analysis of Backscattering from 2D Open-Ended S-shaped Cavities
Solimene, Raffaele	A Single-Snapshot MUSIC Algorithm for ADAS Radar Processing
Sorbello, Gino	Bessel Beam Scattering Evaluation by PEC Targets and Innovative Launcher Design Criteria
Sorocki, Jakub	Design and Manufacturing of Microwave Components by 3D Printing
Soto, Pablo	Multipactor Analysis by Exploiting Kadane's Method
Spagnolini, Umberto	A Joint Radar- and GPS- aided Beam Management at Infrastructure SAR Imaging in automotive scenarios
Spanos, Ioannis	Fabricating 3D Metamaterials via Field’s Metal Injection
Srivastava, Saket	A Realizability Test as Applied on the Generated Source/Load-Pull Data A Unified Real Frequency Technique for the Solution to Broadband Matching Problems A Numerical Procedure to Determine the Power Intake/Delivery Capacity of a GaN RF Power Transistor over Broadband
Stevens, Christopher John	Fabricating 3D Metamaterials via Field’s Metal Injection
Stijnman, Peter	Advances in MRI based Electrical Properties Tomography: a Comparison between Physics-supported Learning Approaches
Suckow, Stephan	Photonic Beamforming for EO and Telecom Applications
Szriftgiser, Pascal	High Data Rate OOK Wireless Link at 300 GHz Band through Metasurface-based Filters: Analysis, Design, and Experiment
T
Tagliaferri, Dario	A Joint Radar- and GPS- aided Beam Management at Infrastructure SAR Imaging in automotive scenarios
Tamborrino, Antonia	Continuous microwave pilot plant for almond disinfestation: preliminary tests
Tasker, Paul J.	Cardiff Model Utilization for Predicting the Response of Multiple-Input Power Amplifiers
Tebaldini, Stefano	SAR Imaging in automotive scenarios
Teixeira, Jorge	Assessing different monoblock dielectric implementations of a low profile beam steering Transmitarray for 3D printing
Tendürüs Çağlar, Gizem	GaN-based Single Stage Low Noise Amplifier for X-band Applications X-band Cascode LNA with Bias-invariant Noise Figure using 0.15 µm GaN-on-SiC Technology
Terrone, Enrico	Creativity and Innovation in Engineering Design. A Philosophical Account
Theis, Guilherme	Towards a Flexible Communication System (HEFPA EU PENTA Project)
Tilly, Julius F.	Calibration and Signal Processing of Polarimetric Radar Data in Automotive Applications
Tognola, Gabriella	Computational Assessment of RF Exposure Levels due to 5G Mobile Phones Human RF-EMF Exposure Assessment for a Wearable Device by Stochastic Dosimetry
Tomassoni, Cristiano	Stereolithography Additive Manufacturing of Overmoded Spherical Filters Design and Manufacturing of Microwave Components by 3D Printing
Tommasino, Pasquale	Characterization-oriented design of E-band Variable-Gain Amplifiers in BiCMOS technology
Toscano, Alessandro	Designing Reconfigurable Reflective and Radiating Structures by Exploiting Composite Vortex Theory Metasurface Coatings Enabling Scattering, Frequency, and Radiation Tunability for Next-Generation Antenna Systems Optimal Design of Huygens Metasurfaces for Oblique Incidence through a Microwave Network Approach
Trifiletti, Alessandro	Characterization-oriented design of E-band Variable-Gain Amplifiers in BiCMOS technology
Tringali, Cristina	GaN-on-Si: An emerging RF Power technolog
Tsitsas, Nikolaos	Modeling of Cylindrical Configurations Coated by Monolayer Graphene with a Modified Method of Auxiliary Sources
Turkeli, Alper	Design of a Novel Dual-Wideband Filtenna
U
Ur Rehman, Masood	A novel Hexagonal Excitation for a Multi-Layer Wearable Miniaturized Antenna
Urfalı, Emirhan	GaN-based Single Stage Low Noise Amplifier for X-band Applications
V
Vadalà, Valeria	mm-Wave GaN HEMT Technology: Advances, Experiments, and Analysis
Valerio, Guido	Homogenization and Dispersion Properties of Glide-Symmetric Corrugated Metasurfaces
Vallechi, Andrea	Fabricating 3D Metamaterials via Field’s Metal Injection
Valori, Marcello	Refinement of a Microwave Needle Applicator for Cancer Therapy via Metamaterials
Van den Berg, Cornelis A.T.	Advances in MRI based Electrical Properties Tomography: a Comparison between Physics-supported Learning Approaches
Vannini, Giorgio	mm-Wave GaN HEMT Technology: Advances, Experiments, and Analysis
Vellucci, Stefano	Metasurface Coatings Enabling Scattering, Frequency, and Radiation Tunability for Next-Generation Antenna Systems Optimal Design of Huygens Metasurfaces for Oblique Incidence through a Microwave Network Approach
Verolino, Luigi	Analytically Regularized Evaluation of the Wakefield of a Particle Travelling through a Plane Conducting Ring
Villalba, Pablo	Photonic Beamforming for EO and Telecom Applications
Vinogradova, Elena	Rigorous Approach to Analysis of Backscattering from 2D Open-Ended S-shaped Cavities
Virone, Giuseppe	3D-Printing of Antenna-Feed Components for Space Applications
Vukovic, Ana	TLM Mesh Impact on Textile Antenna Modelling Characterization of Flexible Interconnects
W
Wagih, Mahmoud	Towards Multi-Mode Millimeter Wave Body Area Networks for Information and Power Transmission: A Co-Existence Study
Walz, Les	An Amplified W-Band Radar A SFCW K-Band Radar Modified for LTCC
Wang, Hui	Photonic Beamforming for EO and Telecom Applications
Weddell, Alex	Towards Multi-Mode Millimeter Wave Body Area Networks for Information and Power Transmission: A Co-Existence Study
Wei, Muh-Dey	Ultracompact Inverted Input Delay Doherty Power Amplifier with a Novel Power Divider for 5G mm-Wave
Wei, Pax	Observation of diffraction from absorber array and field-probe using long vertical objects
Wei, Yifang	K/Ka-Band MIMO Beamforming Phased Antenna Array with Multilayer Substrate Integrated Coaxial Line Feeding Network
Weishaupt, Fabio	Calibration and Signal Processing of Polarimetric Radar Data in Automotive Applications
Whittow, William	Fabricating 3D Metamaterials via Field’s Metal Injection
Wioland, Bastien	Orbital and Spatial Diversity for Next Generation Large NGSO Satellite Constellations
X
Xu, Xin	60-GHz-band OAM Multiplexing with a RLSA that Simultaneously Generates Three OAM modes
Xu, Zhaoyuan	A Fine-grained Modulation Technology for ZigBee Backscatter Communication
Y
Yadav, Rahul	A Double Mirror Stub Design of Broadband Planar Bias Tee for System on Chip Integration
Yang, Shiyi	Understanding the Dispersion Diagrams of Two-Dimensional Supercells
Yarman, Siddik	A Realizability Test as Applied on the Generated Source/Load-Pull Data A Unified Real Frequency Technique for the Solution to Broadband Matching Problems A Numerical Procedure to Determine the Power Intake/Delivery Capacity of a GaN RF Power Transistor over Broadband
Yilmaz, Asim Egemen	CMOS Negative Impedance Converter Circuit with the Elimination of Parasitic Gate-Source Capacitance
Yılmaz, Doğan	GaN-based Single Stage Low Noise Amplifier for X-band Applications
Z
Zafar, Salahuddin	X-band Cascode LNA with Bias-invariant Noise Figure using 0.15 µm GaN-on-SiC Technology
Zahran, Sherif R.	Flippable and Hermetic E-Band RWG to GCPW Transition with Substrate Embedded Backshort BiCMOS Rat-Race Coupler Based on Slow-Wave CPS Transmission lines for 120 GHz Applications
Zairi, Hassen	Bowtie Antenna Performance Optimization using Metamaterial and Characteristic Mode Analysis
Zardi, Francesco	Design and Planning of Static and Reconfigurable EM Skins for Smart Electromagnetic Environments
Zeni, Olga	Environmental exposure to electromagnetic fields: A geo-referenced Cadaster of the Radiofrequency sources in Basilicata Region Possible role of autophagy in in vitro radiofrequency-induced adaptive response
Zetterstrom, Oskar	Understanding the Dispersion Diagrams of Two-Dimensional Supercells
Ziegler, Volker	Future challenges in microwaves related to aeronautics
Zobu, Ayse Muge	Low Sidelobe Level Antenna Array with Amplitude Tapering
Zografopoulos, Dimitrios C.	Design of a Tunable THz 1-D Leaky-Wave Antenna based on Nematic Liquid Crystals High Data Rate OOK Wireless Link at 300 GHz Band through Metasurface-based Filters: Analysis, Design, and Experiment
Zumbo, Sabrina	Advances in MRI based Electrical Properties Tomography: a Comparison between Physics-supported Learning Approaches
Ö
Özbay, Ekmel	GaN-based Single Stage Low Noise Amplifier for X-band Applications X-band Cascode LNA with Bias-invariant Noise Figure using 0.15 µm GaN-on-SiC Technology

Disclaimer | Powered by EasyChair Smart Program