[Invited talk] Development in iron ore pelletizing for quality improvement (abstract)

[Invited talk] Development of a Polymeric Organic Binder for Coal Briquetting process for recycling in COREX Iron Making Technology (abstract)

[Invited talk] Use of high Alumina Indian iron ore in making super fluxed sinter for high pellet BF operation (abstract)

[Virtual mode] New Trends in Agglomeration Toward Next Generation Iron and Steel Making Technologies (abstract)

Processing of Iron Ores with High LOI for Pellet Making (abstract)

Sintering of low grade chromite fines for Ferrochrome production (abstract)

Laboratory scale simulation of grate bar jamming of pallet car due to presence of Alkali in sinter feed mix by solid waste addition (abstract)

[Invited talk, virtual mode] Fluid flow simulation of an EAF with bottom gas injection comparing supersonic and coherent jets (abstract)

[Invited talk] Numerical simulation of temperature evolution in refractory side wall during the scrap melting in a lab-scale DC electric arc furnace (abstract)

High-fidelity Multiscale Modelling and Simulation on Bubbles and Interface Behaviors for a Gas-Stirred Ladle (abstract)

Modelling of Hydrodynamics and Mixing Phenomena in an Inductively Stirred Ladle (abstract)

Modeling the effect of SEN design on fluid flow in thin-slab casting. (abstract)

Effect of Internal Gas Injection in Various Shroud Geometry and Influence on Tundish Hydrodynamic Performance (abstract)

[Invited talk] Powder holdups in 2-D and 3-D packed beds with lateral and bottom injection of gas-powder (abstract)

[Invited talk] An experimental investigation of slugging phenomenon in 2D binary gas-solid tapered fluidized beds (abstract)

[Invited talk] Advancements in Blast Furnace Burden Distribution Control in Tata Steel (abstract)

Enhanced Hydrogen in Blast Furnace and Its Effect on Reduction Behavior of Iron Oxides (abstract)

Productivity improvement of large Blast Furnace (4554 m3) at Jindal Steel and Power Angul, India (abstract)

[Cancelled] Ferrous Burden Performance for Reduction and Degradation using Advanced Experiment and Characterization Methods (abstract)

[Cancelled] Development of Scaled-Down Pulverized Coal Combustor to replicate Raceway conditions of Blast furnace through numerical simulations (abstract)

Transformation in Ironmaking, Tata Steel: A Journey of Last 10 Years (abstract)

[Invited talk] Agglomeration of iron and steel making residues using organic binders (abstract)

Studies on Mechanical and Metallurgical characteristics of Fluxed Composite Pre Reduced pellets made with high ash coal (abstract)

Development of an Automated Property Prediction System for Iron-ore Agglomeration Processes (abstract)

A Candid Perspective from a Highly Productive, Modern Mini-Mill: Fundamentals of Value-In-Use Modelling and Optimization of Raw Materials (Scrap, Pig Iron and HBI) (abstract)

Optimization of Reagents Consumption in hot metal Desulphurisation (abstract)

Integrated Process Optimization strategy at LFs to reduce energy consumption and superheat delays (abstract)

Sliver defects in low carbon Nb-V-Ti microalloyed steel caused by edge crack in continuous cast slab (abstract)

Use Of Mould Heat Flux As A Tool To Prevent Off Corner Longitudinal Breakouts in Slab Casters (abstract)

Hydrogen behaviour in continuously cast and hot rolled low alloy steels (abstract)

Studies on increasing utilization of Indian high ash coal in coke oven (abstract)

Study on push force measurement technique and operational difficulties in stamp charge coke making (abstract)

Recycling of Waste Plastics in Coke Ovens (abstract)

[Invited talk] Slag conductivity and it’s effect on Oxygen Transport and interfacial reaction kinetics (abstract)

[Invited talk] A Study on Altering Flux in BOF Steelmaking and Its Impact on Sustainability (abstract)

Study of Slag Formation and Foaming in Early Stages of Direct Reduced Iron (DRI)-Hot Metal (HM) based Electric Arc Furnace (EAF) Operation (abstract)

Effect of CaO content on crystallization behavior of EAF slag under different cooling environment (abstract)

Investigating the melting behavior of a CaO-MnO-SiO2-Al2O3 flux for use in fusion welding of low carbon steel (abstract)

Injection of Plastics in Electric Arc Furnace (abstract)

Influence of Slag Carryover on the Non-Metallic Inclusion and Magnetic Property in Electrical Steel (abstract)

Application of FactSage based kinetic process model to diagnose ladle refining process for controlling impurity concentration in liquid steel (abstract)

thermodynamic and kinetic based process simulation of Ladle refining process (LF) and validation with plant data (abstract)

Improving Titanium Recovery during Ladle Furnace Steelmaking (abstract)

[Cancelled] Ingenious silico-thermic chemical heating for high quality low aluminum grade electrical steels (abstract)

[Cancelled] Reduction in nitrogen absorption in HSLA steels during electrical arcing process by increasing nitride capacity of slag (abstract)

Dynamic Model Based upon Multiple Reactors Approach (abstract)

[Plenary talk] Improving inclusion analysis with simulation (abstract)

Pelletizing of magnetite in the fossil-free iron production. (abstract)

[Invited talk] Challenges in Making Quality Agglomerates using Lean Iron Ores for Sustainable Iron making (abstract)

Effect of different sources of carbon in hematite ore pellet (abstract)

Influence of load or pressure on rate of sintering during induration of magnetite pellet (abstract)

Effect of PVA addition as a binder on the iron ore pellet properties (abstract)

[Invited talk, virtual mode] Advanced methods for studying non-metallic inclusion evolution (abstract)

Effect of de-oxidation and slag composition on inclusion evolution and cleanliness in bearing steels (abstract)

Quality improvement in high carbon eutectoid grade steel wire rods for tire cord application (abstract)

Technological Advancement in Calcium Treatment for Clean Steelmaking (abstract)

[Virtual mode] Inclusion agglomeration - a key issue contributing to ‘Inclusion Engineering’ in advanced steels (abstract)

Effect of Si & Al Addition on Characterization of Inclusions in Al-killed High-Si Steel (abstract)

[Invited talk] Digitalization in Steel Industry – Complementary roles of Artificial Intelligence & Classical Modelling (abstract)

Prediction of Roughing Mill Exit Temperature using Advanced Analytics (abstract)

Leveraging Advanced Data Analytics to Optimize Process at F-BF TATA Steel (abstract)

An ICME Framework for Design of Hot-rolled Nb,Ti Microalloyed Steels (abstract)

Prediction of Longitudinal Facial Cracks on Slab Surface using Advanced Analytics (abstract)

[Invited talk] New Fiber Optic Sensor Developments for Applications in Steel Manufacture (abstract)

[Invited talk] Elimination of Edge Transverse Cracks in Low Carbon Micro-alloyed Grade Slabs at Tata Steel Meramandali Works (abstract)

DEVELOPMENT OF CONTINUOUS TEMPERATURE MEASUREMENT IN A CONTINUOUS CASTING MACHINE AND THE PROCESS, PRACTICE AND BENEFITS OF DYNAMIC SUPERHEAT CONTROL (abstract)

Effect of secondary cooling on bulging deformation and internal crack formation in continuously cast steel mini slabs. (abstract)

Evaluation of longitudinal cracks through coupled fluid flow, heat transfer and thermo-mechanical modelling approach in a thin slab caster (abstract)

Computational approach to estimate the remnant thickness of hearth refractory lining of Blast furnace (abstract)

An investigation of multiphase flows through a packed bed with implications for iron-making blast furnaces (abstract)

[Cancelled] Novel systems to measure and visualize internal process details of Blast Furnace Top (abstract)

[Cancelled] Numerical Evaluation of Blast Furnace Trough to Improve Campaign Life (abstract)

A modified bubble-based EMMS drag model for studying the hydrodynamics of a 2D gas-solid tapered fluidized bed (abstract)

Inter-diffusion studies in the (Fe,Mg)O system for studying the interactions between Fe and FeO with MgO-C refractories under flash ironmaking conditions (abstract)

Development of Calcium Magnesium Aluminates in Refractory Applications (abstract)

An Innovative Desulphurization Solution by JAMIPOL Eliminates Magnesium (abstract)

Refining Studies for Steel Making in Induction Furnace (abstract)

Present trends in use of Tundish Fluxes to improve steel productivity (abstract)

Slag design for producing high-clean steels: From fundamental knowledge to industrial applications (abstract)

Digitalization of Steel Industries (abstract)

[Invited talk] Hydrogen reduction of low-grade banded ion ores (abstract)

Carbothermic reduction and kinetics of a lean grade multimetallic magnetite ore (abstract)

Reduction kinetics of fluxed iron ore pellets made from coarse iron ore particles (abstract)

50+ YEARS OF MATHEMATICAL MODELLING OF STEELMAKING AND CASTING PROCESSES: ADVANCEMENTS AND UNSCALED FRONTIERS (abstract)

Physical and Mathematical Modeling of Microbubble Formation in Liquid Metals using Rotational Shearing and Induced Turbulence (abstract)

Effect of in-mold electromagnetic stirring on solidification and inclusion behavior (abstract)

Insights on multiphase treatment towards modeling the fluid dynamics of gas-stirred baths (abstract)

[Invited talk] Evolution behavior of inclusion composition in Al-killed steel during LF-RH process (abstract)

Effect of flux composition on refining and reoxidation behavior of Si-killed stainless steel during ladle and tundish metallurgy (abstract)

Electron microscopy solutions for Characterization of complex inclusions in steel (abstract)

Manufacturing a high-clean Fe-Cr-Ni-Mn-Co system alloy by slag treatment with ferroalloys feedstock (abstract)

[Virtual mode] Inclusions evolution in Fe-22Mn-xAl-0.6C motlen steel and contacting with double-saturated molten slag (abstract)

[Plenary talk] Fundamentals Study of Slag Property Control for CO2 Emission Reduction in Iron and Steelmaking (abstract)

[Invited talk] Simultaneous Analysis of Soluble and Insoluble Oxygen Contents in Steel: Concept, Thermodynamic Basis, and Applications to Al-killed Steel (abstract)

[Invited talk] Microscopic reaction mechanism of the CaO-based slag formation in the steelmaking process (abstract)

[Invited talk] Hot stage engineering of BOF slag with Al2O3 additions (abstract)

Hematite Ore Decomposition at Particle Scale (abstract)

Si-O deoxidation equilibria in liquid steel (abstract)

RHF-EAF A Sustainable Route of Steelmaking: An Exergy Analysis (abstract)

[Invited talk] Methodology for Developing Strategic Roadmap for Reducing Energy Consumption and CO2 Emission for Iron and Steel Plants (abstract)

Towards Green Steel Production for Indian Context (abstract)

Continuing the Decarbonizing Initiatives using Induction Furnaces for a Sustainable Clean Steel Production (abstract)

Efficient Method of Suggesting Alternate Grades using Machine Learning for Steelmaking Plant (abstract)

Optimization of the blast furnace ironmaking process using machine learning and genetic algorithms (abstract)

Sticker type breakout detection using machine learning (abstract)

Application of Ordinal Logistic Regression for Quality Improvement of Continuously Cast Steel Billets (abstract)

Key Elements of Hot Strip Mill Automation to achieve Critical to Quality Parameters in Hot Rolled Steel (abstract)

Descriptive modelling of the HIsarna process (abstract)

A thermodynamic based process model for predicting the slag path in Blast furnace operation along with validation from plant data (abstract)

Some examples of applications of commercial thermodynamic packages for steelmaking research (abstract)

Role of ladle glaze on inclusion composition in low carbon aluminum killed steel (abstract)

A soft sensor for measuring width in the Hot Strip Mill (abstract)

Sampling Strategy & Prediction of Bubble Sauter Mean Diameter in a Continuous Casting Mold using Machine Learning (abstract)

Blast furnace heat loss root cause diagnosis using deep learning (abstract)

Optimization of Coke oven heating using Machine Learning Approach (abstract)

Carbon flow and CO2 emission for induction furnace steelmaking (abstract)

A novel process of producing liquid iron using microwaves (abstract)

Improvement of Hole Expansion Ratio in Hot Rolled 590MPa Steel by Reengineering the Microstructure (abstract)

Converting Steel Slag into Construction Sand (abstract)

Reducing Oxidized Bath in Energy Optimizing Furnace (abstract)

[Plenary talk, virtual mode] CO2 capture and utilization in steel making process (abstract)

Decarbonization of Steel Industries (abstract)