PROGRAM
Days: Tuesday, September 3rd Wednesday, September 4th Thursday, September 5th
Tuesday, September 3rd
View this program: with abstractssession overviewtalk overview
08:30-10:00 Welcome Desk, Registration, Welcome Coffee
Welcome Desk, Registration, Welcome Coffee
Location: Trakt IV, Foyer
10:00-12:30 Session 1: Plenary Session I: "Opening Session"
Plenary Session
Chair:
Location: Trakt IV, D415
10:00 | Welcome Note to EEMODS'24 by the Conference Chair (JRC) (abstract) |
10:05 | Welcome from the local Organizing Committee (HSLU/BFH/Impact Energy) |
10:15 | EU energy efficiency legislation on electric motors and motor systems: an update (abstract) |
10:40 | Energy efficient electric motor systems – the Swiss policy perspective (SFOE) |
11:05 | European Committee of Manufacturers of Electrical Machines and Power Electronics (CEMEP) |
11:30 | European Association of Pump Manufacturers (Europump) |
11:55 |
14:00-15:30 Session 2A: Policies I
Parallel Session
Chair:
Location: Trakt IV, D415
14:00 | Policies for Accelerating the Global Adoption of Efficient Electric Motor Systems (abstract) ![]() PRESENTER: Maarten van Werkhoven |
14:30 | A Collaborative Approach to Shaping the Future of the United States Motor Market (abstract) ![]() |
15:00 | Power Index Metric to Quantify Energy Savings (abstract) ![]() PRESENTER: Tim Albers |
14:00-15:30 Session 2B: Motors I
Parallel Session
Chair:
Location: Trakt II, C210
14:00 | Extrapolation of Losses and Efficiency in Fieldweakening and Overload Range for Delta- and Star-Connected Electrical Machines based on IEC 60034-2-3 (abstract) ![]() ![]() PRESENTER: Martin Doppelbauer |
14:30 | Axial flux motor using nanocrystalline soft magnetic material (abstract) ![]() ![]() PRESENTER: Edson Carlos Peres de Oliveira |
15:00 | Study of power consumption saving on cooling fans with variable speed applied on force ventilated electric motors (abstract) ![]() |
14:00-15:30 Session 2C: Compressors I
Parallel Session
Chair:
Location: Trakt II, D218
14:00 | A Study of Energy Efficiency Standardization for the Integrated Compressed Air Equipment (ICAE) in China (abstract) ![]() ![]() PRESENTER: Bo Hu |
14:30 | Harnessing the strength of Active Magnetic Bearings with High-Speed Air compression Operations, Paving the Way of the Specific Energy improvement and Carbon Emission Reduction (abstract) |
15:00 | Compressed air system optimization (abstract) ![]() ![]() PRESENTER: Soren Draborg |
16:00-17:30 Session 3A: Policies II
Parallel Session
Chair:
Location: Trakt IV, D415
16:00 | Policy recommendations to accelerate the replacement of old electric motors (abstract) ![]() PRESENTER: Bruno de Wachter |
16:30 | Green Growth Strategy towards 2050 Carbon Neutrality and The effect of Top Runner motor (IE3) regulation in Japan (abstract) ![]() PRESENTER: Ogawa Susumu |
17:00 | Advancing Energy Efficiency in Motor-Driven Systems with Digital Skills Development Through a Novel Educational Framework (abstract) ![]() ![]() PRESENTER: Wilbert Van den Eijnde |
16:00-17:30 Session 3B: Motors II
Parallel Session
Chair:
Location: Trakt II, C210
16:00 | Reduced order model for Bearingless PM motor (abstract) ![]() PRESENTER: Lucas Selonke Klaas |
16:30 | Development of a virtual sensor for torque prediction in electric machines by machine learning methods and physical modeling (abstract) ![]() ![]() PRESENTER: Lennart Kopp |
17:00 | World wide motor replacement for a steel wire company (abstract) PRESENTER: Kurt Stockman |
16:00-17:30 Session 3C: Compressors II
Parallel Session
Chair:
Location: Trakt II, D218
16:00 | Comparative Analysis of Air Compressor Energy Efficiency Standards Of China, EU and USA (abstract) ![]() ![]() PRESENTER: Xiaoming Sun |
16:30 | Comparison of seasonal energy efficiency of different compressor types for refrigeration applications (abstract) |
17:00 | Experimental study of air leakages using three different ultrasonic microphones (abstract) ![]() ![]() PRESENTER: Alireza Hojjati |
17:30-18:30 Lab Tours
Guided Lab Tour in HSLU
Wednesday, September 4th
View this program: with abstractssession overviewtalk overview
08:30-10:30 Session 4: Plenary Session II: "Circular Economy"
Plenary Session
Chair:
Location: Trakt IV, D415
08:30 | |
09:00 | Business and policy synergies: unlocking circular potential (Siemens) |
09:30 | The Environmental Impact of Every MWh of Electricity Losses Over the Next 20 Years in the EU (ICA) (abstract) ![]() ![]() PRESENTER: Fernando Nuño |
11:00-12:30 Session 5A: Circular Economy I
Parallel Session
Chair:
Location: Trakt II, D218
11:00 | How the revision of EU Ecodesign criteria could lead to fundamental changes in motor manufacturing (abstract) ![]() ![]() PRESENTER: Bruno De Wachter |
11:30 | Rewinding electrical machines to maintain efficiency and performance (abstract) ![]() |
12:00 | Industrialization of the French Repair Index – Overview of the regulations, analysis of the B2C constraints and conclusion (abstract) ![]() ![]() PRESENTER: Amandine Louise |
11:00-12:30 Session 5B: Motor Systems I
Parallel Session
Chair:
Location: Trakt II, C210
11:00 | Efficiency improvement potential of inverter driven electrical motors (abstract) ![]() ![]() PRESENTER: Peter Scavenius Andersen |
11:30 | Variable speed drives in electric motors: Quantification of the energy saving potential in the EU (abstract) ![]() PRESENTER: Alexander Schröder |
12:00 | Structural Dynamics Assessment of Variable Frequency Drives Supported by Flexible Foundation Structures under Consideration of Mechanical and Electromagnetic Excitation (abstract) ![]() PRESENTER: Maria Bergmann |
11:00-12:30 Session 5C: Policies III
Chair:
Location: Trakt IV, D415
11:00 | Recent changes to energy efficiency motor regulations in the US - a guide to the updated scope, test methods, levels, and effective dates (abstract) |
11:30 | Potential for Further Improvement of China’s Electric Motor Energy Efficiency Standards and Its Impact on Carbon Emissions Reductions (abstract) ![]() PRESENTER: Lei Zeng |
12:00 | Quantifying the benefits and costs of energy audits based on measurements with an energy monitoring system of the relevant electricity consumers of industrial sites compared to classical audits (abstract) ![]() PRESENTER: Yannick Riesen |
14:00-15:30 Session 6A: Policies IV
Parallel Session
Chair:
Location: Trakt IV, D415
14:00 | How ISO and IEC work together to design Energy Efficient Electric Motor Driven Systems (abstract) ![]() PRESENTER: Maarten van Werkhoven |
14:30 | Single-Phase Induction Motors and the Challenge of Energy Efficiency in Brazil: A Critical and Proposed Analysis (abstract) ![]() ![]() PRESENTER: Abrão Garcia de Oliveira Junior |
15:00 | Energy Efficiency Networks - a policy instrument for faster diffusion of efficient electrical motor applications (abstract) ![]() |
14:00-15:30 Session 6B: Circular Economy II
Parallel Session
Chair:
Location: Trakt II, D218
14:00 | How Material Efficiency under EU Green Deal will impact VSDs and Motors supporting Circular Economy (abstract) PRESENTER: Martial Patra |
14:30 | Evaluating the Environmental Impacts of High-Efficiency Electric Motors: A Comparative Analysis of SCIM, SynRM, and PMSM Technologies (abstract) PRESENTER: Danilo de Souza |
15:00 | Finding the right balance between Material use and Efficiency levels for Electric motors, proposing a new generation of solutions. (abstract) ![]() PRESENTER: Nicolas Tanguy |
14:00-15:30 Session 6C: Motor Systems II
Parallel Session
Chair:
Location: Trakt II, C210
14:00 | Software Defined, Variable and Completely Integrated Drive (abstract) ![]() PRESENTER: Philipp Rauh |
14:30 | Smart drive test bench for instructional purposes (abstract) ![]() PRESENTER: Alberto Colotti |
15:00 | Validation Research on IEC 61800-9-2 and 60034-2-3 (abstract) ![]() PRESENTER: Lily Baldewicz |
16:00-17:00 Session 7A: Compressors III
Parallel Session
Chair:
Location: Trakt II, D218
16:00 | Round Robin for the Development of a Guide to the Measurement of Packaged Air Compressor Efficiency (abstract) PRESENTER: Peter Radgen |
16:30 | An energetic comparison of plug-in and central refrigerated cabinets in supermarkets (abstract) PRESENTER: Manuel Diem |
16:00-17:00 Session 7C: Digitalization I
Parallel Session
Chair:
Location: Trakt II, C210
16:00 | Barriers and Solutions to increase Energy Efficiency of Electric Motor Systems by Digitalisation (abstract) ![]() PRESENTER: Konstantin Kulterer |
16:30 | Energy consumption of digitalisation in motor systems (abstract) ![]() PRESENTER: Rita Werle |
19:00-23:00 Gala Dinner Verkehrshaus Luzern
Gala Dinner Verkehrshaus Luzern
Location: Verkehrshaus Luzern
Thursday, September 5th
View this program: with abstractssession overviewtalk overview
08:30-10:30 Session 8: Plenary Session III: "Digitalization"
Plenary Session III: "Digitalization"
Chair:
Location: Trakt IV, D415
08:30 | Real time simulations of drive trains in industrial applications (abstract) ![]() PRESENTER: Alexander Unruh |
09:00 | Digital and wireless Operating Deflection Shape (ODS) for assets condition monitoring (abstract) ![]() PRESENTER: Sebastião Nau |
09:30 | Holistic Drive System Optimization for Robotics (Maxon) (abstract) |
11:00-13:00 Session 9A: Motors III
Parallel Session
Chair:
Location: Trakt II, C210
11:00 | Maximizing Electric Motor Energy Savings Under Real-World Conditions and Constraints Topic 2 (abstract) ![]() ![]() |
11:30 | Efficient Uncertainty Propagation for Electric Machine Computation (abstract) ![]() PRESENTER: André Krämer |
12:00 | Optimizing Alternator Performance: Harnessing the Power of Design for Six Sigma (DFSS) Applied on electrical generation. (abstract) ![]() ![]() PRESENTER: Pedro Martins de Oliveira |
11:00-12:30 Session 9B: Fans & Pumps I
Parallel Session
Chair:
Location: Trakt II, D218
11:00 | Design and investigation of an axial flux motor with SMC as a fan drive (abstract) ![]() PRESENTER: Michael Peters |
11:30 | Efficient operation of centrifugal pumps (abstract) ![]() ![]() |
12:00 | The real way for energy saving (abstract) ![]() PRESENTER: Michael Könen |
11:00-13:00 Session 9C: Digitalization II
Parallel Session
Chair:
Location: Trakt IV, D415
11:00 | Electric Motor Consumption and Condition Monitoring with IoT (abstract) ![]() ![]() PRESENTER: Santiago Viertel |
11:30 | Digitalization in variable speed motor systems (abstract) PRESENTER: Jens Lund Tovgaard |
12:00 | Electric motor energy consumption estimation with wireless IoT sensor and 6 Sigma validation (abstract) ![]() PRESENTER: Edson Carlos Peres de Oliveira |
14:00-15:00 Session 10A: Motors IV
Parallel Session
Chair:
Location: Trakt II, C210
14:00 | Analysis and comparison between the IEC 60034-2-1 x IEEE 112 x CSA C390 x NBR 17094-3 standards for calculating the efficiency of three-phase induction motors using the loss segregation method. (abstract) ![]() ![]() PRESENTER: Agnaldo Reus Medeiros Rodrigues |
14:30 | Energy-Efficient Back-To-Back Testing of Synchronous Reluctance Motors (abstract) ![]() PRESENTER: Federico Centi |
14:00-15:00 Session 10B: Motor Systems III
Chair:
Location: Trakt II, D218
14:00 | The performance and cost analysis of induction motors with large-sized die-cast copper rotors (abstract) |
14:30 | Wieland´s induction rotor technologies |
14:00-15:00 Session 10C: Digitalization III
Chair:
Location: Trakt IV, D415
14:00 | Combing predictive maintenance and energy optimization for fast ROIs (abstract) ![]() ![]() PRESENTER: Matthias Manger |
14:30 | Digitalisation benefits with VSD controlled applications compared to traditional approach (abstract) ![]() PRESENTER: Jukka Tolvanen |
15:00-15:30 Session 11: Plenary Session IV: "Closing Session"
Plenary Session IV: "Closing Session"
Chair:
Location: Trakt IV, D415