MMA 2020: IEEE XXX INTERNATIONAL SCIENTIFIC SYMPOSIUM 'METROLOGY AND METROLOGY ASSURANCE' 2020

This page contains an index consisting of author-provided keywords.

A
accuracy	DYNAMIC ERRORS EVALUATION AND CORRECTION ALGORITHM METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT
ACM - active cathode materials	Study on the Structure and Composition of new Ferromagnetic Materials with an Automated System for Complex Non-destructive Testing
Adaptive methods	The features of application of adaptive methods of continuous planning of the process of diagnosis of the analogue and analogue-digital systems
AFA - amorphous ferromagnetic alloys	Study on the Structure and Composition of new Ferromagnetic Materials with an Automated System for Complex Non-destructive Testing
AIR CONDITION	“SafeAir” Software to Analyze Air for Allergen Content
algorithms	DYNAMIC ERRORS EVALUATION AND CORRECTION ALGORITHM
ALLERGENS	“SafeAir” Software to Analyze Air for Allergen Content
aluminum cylinders	Development of Panels of Recyclable Materials to Improve Energy Efficiency During the Winter Season Study of a Panel of Recyclable Materials to Improve Energy Efficiency During the Winter Season
Analog Digital Systems	The features of application of adaptive methods of continuous planning of the process of diagnosis of the analogue and analogue-digital systems
analog-to-digital converter	Influence of Voltage and Current Samples Errors on the Reactive Power Measurement Error
analysis	Optimization of the activities in the metrological laboratory is the implementation of the metrological software MET / TEAM
archetype	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
automated systems	DIGITAL AGRICULTURE INDUSTRY – DEVELOPMENT OF SUSTAINABLE STRATEGIES FOR INDUSTRY AUTOMATIZATION
B
bagging	RESEARCH OF INTELLIGENT DATA ANALYSIS METHODS FOR IDENTIFICATION OF COMPUTER SYSTEM STATE
Bayesian inference	Error vs Uncertainty. Mathematical, terminological and conceptual aspects of evaluating the characteristics of measurement accuracy
boosting	RESEARCH OF INTELLIGENT DATA ANALYSIS METHODS FOR IDENTIFICATION OF COMPUTER SYSTEM STATE
busbar current transformers	Electrical power stations design features and verification problems for busbar current transformers
C
calibration	Optimization of the activities in the metrological laboratory is the implementation of the metrological software MET / TEAM DOUBLE REVERSE METHOD FOR CALIBRATION OF PERPENDICULAR STANDARDS Measurement uncertainty evaluation by kurtosis method at calibration of a household water meter Calibration of power quality analyzers on total harmonic distortion by standard periodic non-harmonic signals Methods for determining the recalibration intervals of measuring equipment during their operation
calibration procedure	Validation of calibration procedures
carbonation	DETERMINATION OF SPECIFIC ELECTRICAL RESISTANCE AND CARBONATION DEPTH OF CONCRETE IN REINFORCED CONCRETE ELEMENTS
categorization	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
Charging	Measurement of the Efficiency of Electric Vehicle Charging Stations
CODATA	Data processing in determining of the gravitational constant obtained by the method of metrologically consistent set (MCS).
color	COLOR MEASUREMENT USING ELECTRONIC COLORIMETER
Complex non-destructive testing	Study on the Structure and Composition of new Ferromagnetic Materials with an Automated System for Complex Non-destructive Testing
computer-assisted translation	Measuring Multimedia Content Proximity via Artificial Intelligence Methods
concrete	DETERMINATION OF SPECIFIC ELECTRICAL RESISTANCE AND CARBONATION DEPTH OF CONCRETE IN REINFORCED CONCRETE ELEMENTS
conductivity	Conductometry of natural waters in pulsed electric field with rising strength
contact probes	18PRT01 Probe Trace Traceability for contact probes and stylus instruments measurements
contactless non-destructive method	Testing of concrete by contactless non-destructive tomographic method
control charts	Methods for determining the recalibration intervals of measuring equipment during their operation
conventional standard	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
corrosion	DETERMINATION OF SPECIFIC ELECTRICAL RESISTANCE AND CARBONATION DEPTH OF CONCRETE IN REINFORCED CONCRETE ELEMENTS
cost	METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT DEVELOPMENT, RESEARCH AND OPTIMIZATION OF CONTACTLESS DC METERS
D
decision criteria	ROBUST INTERVAL CRITERION FOR A STEADY VALUE
decision trees	RESEARCH OF INTELLIGENT DATA ANALYSIS METHODS FOR IDENTIFICATION OF COMPUTER SYSTEM STATE
deviation from perpendicularity	DOUBLE REVERSE METHOD FOR CALIBRATION OF PERPENDICULAR STANDARDS
device	COLOR MEASUREMENT USING ELECTRONIC COLORIMETER METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT
Diagnosis process	The features of application of adaptive methods of continuous planning of the process of diagnosis of the analogue and analogue-digital systems
Diagnostic systems	The features of application of adaptive methods of continuous planning of the process of diagnosis of the analogue and analogue-digital systems
digital agriculture industry	DIGITAL AGRICULTURE INDUSTRY – DEVELOPMENT OF SUSTAINABLE STRATEGIES FOR INDUSTRY AUTOMATIZATION
digital transformation	DIGITAL AGRICULTURE INDUSTRY – DEVELOPMENT OF SUSTAINABLE STRATEGIES FOR INDUSTRY AUTOMATIZATION
Diverter Switch	Control Systems for On-Load Tap-Changers
drift	Methods for determining the recalibration intervals of measuring equipment during their operation
DUST	“SafeAir” Software to Analyze Air for Allergen Content
dynamic error analysis	ROBUST INTERVAL CRITERION FOR A STEADY VALUE
dynamic errors	DYNAMIC ERRORS EVALUATION AND CORRECTION ALGORITHM
E
E-SORT	Measurement of the Efficiency of Electric Vehicle Charging Stations
economy	QUALITY ASSESSING METHODS OF EQUIPMENT SAMPLES OF THE NATIONAL ECONOMY OF UKRAINE
Efficiency	Measurement of the Efficiency of Electric Vehicle Charging Stations
eidos	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
Electrical	Measurement of the Efficiency of Electric Vehicle Charging Stations
Electricity	Measurement of the Efficiency of Electric Vehicle Charging Stations
elements	Cartography of Emotions and a Modern View of Elements
emotions	Cartography of Emotions and a Modern View of Elements
empirical approach	Error vs Uncertainty. Mathematical, terminological and conceptual aspects of evaluating the characteristics of measurement accuracy
Energy	Measurement of the Efficiency of Electric Vehicle Charging Stations
Enhancing sensitivity	Hall Sensor with Geometry-enhanced Sensitivity
ensemble classification methods	RESEARCH OF INTELLIGENT DATA ANALYSIS METHODS FOR IDENTIFICATION OF COMPUTER SYSTEM STATE
EV / HEV - electric and hybrid vehicles	Study on the Structure and Composition of new Ferromagnetic Materials with an Automated System for Complex Non-destructive Testing
evolutionary approach	Measuring Multimedia Content Proximity via Artificial Intelligence Methods
experiment	METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT DEVELOPMENT, RESEARCH AND OPTIMIZATION OF CONTACTLESS DC METERS
F
factor analysis	Factor Analysis for Humandependent Factors Received in actions in a Virtual Reality
false positive solution	ROBUST INTERVAL CRITERION FOR A STEADY VALUE
finite state machine	Verification of automatic logic control systems on FPGA by analyzing the correctness of state diagrams of control finite state machines Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines
Fluke	Optimization of the activities in the metrological laboratory is the implementation of the metrological software MET / TEAM
form and surface roughness standards	18PRT01 Probe Trace Traceability for contact probes and stylus instruments measurements
frequency deviation	Application of the method based on the averaging of the squares of samples for the RMS measurement of nonsinusoidal signals
Fresnel lens	Development of Panels of Recyclable Materials to Improve Energy Efficiency During the Winter Season Study of a Panel of Recyclable Materials to Improve Energy Efficiency During the Winter Season
Fuel density	Integrated Fuel Quantity Measurement
Fuel quantity measurement	Integrated Fuel Quantity Measurement
G
generally accepted standard	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
global trade	Measurements for global trade
H
Hall device	Hall Sensor with Geometry-enhanced Sensitivity
harmonized legislation	Measurements for global trade
HDL-model	Verification of automatic logic control systems on FPGA by analyzing the correctness of state diagrams of control finite state machines Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines
heating	Development of Panels of Recyclable Materials to Improve Energy Efficiency During the Winter Season Study of a Panel of Recyclable Materials to Improve Energy Efficiency During the Winter Season
household water meter	Measurement uncertainty evaluation by kurtosis method at calibration of a household water meter
I
impurities	Conductometry of natural waters in pulsed electric field with rising strength
inconsistent data	Data processing in determining of the gravitational constant obtained by the method of metrologically consistent set (MCS).
index	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
indicator	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
instrumental measurement uncertainty	Validation of calibration procedures
interdisciplinarity	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
intermediate check	Methods for determining the recalibration intervals of measuring equipment during their operation
invariant category	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
inverse matrix calculation	Multiprobe microwave multimeter sensor signal iterative processing
K
Kalman filter	Multiprobe microwave multimeter sensor signal iterative processing
kurtosis method	Measurement uncertainty evaluation by kurtosis method at calibration of a household water meter
L
Length measurement	Virtual measurement system for length measurement based on VIO
Load cell	Integrated Fuel Quantity Measurement
M
Magnetic sensor	Hall Sensor with Geometry-enhanced Sensitivity
manufacturing	Strategy for Shortened Manufacturing cycle of mold tool in extremely short terms
mathematical model	DYNAMIC ERRORS EVALUATION AND CORRECTION ALGORITHM COLOR MEASUREMENT USING ELECTRONIC COLORIMETER DEVELOPMENT, RESEARCH AND OPTIMIZATION OF CONTACTLESS DC METERS
measurement	Measurements for global trade COLOR MEASUREMENT USING ELECTRONIC COLORIMETER
measurement error	Application of the method based on the averaging of the squares of samples for the RMS measurement of nonsinusoidal signals Influence of Voltage and Current Samples Errors on the Reactive Power Measurement Error
measurement errors	Error vs Uncertainty. Mathematical, terminological and conceptual aspects of evaluating the characteristics of measurement accuracy
measurement method	DOUBLE REVERSE METHOD FOR CALIBRATION OF PERPENDICULAR STANDARDS
measurement of angular displacements	METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT
measurement system	Virtual Measurement System for Simultaneous Records of the Temperature Change from Multiple Transducers
measurement uncertainty	Measurement uncertainty evaluation by kurtosis method at calibration of a household water meter Error vs Uncertainty. Mathematical, terminological and conceptual aspects of evaluating the characteristics of measurement accuracy
measurements in the humanities	Cartography of Emotions and a Modern View of Elements
MET-TEAM	Optimization of the activities in the metrological laboratory is the implementation of the metrological software MET / TEAM
method	QUALITY ASSESSING METHODS OF EQUIPMENT SAMPLES OF THE NATIONAL ECONOMY OF UKRAINE
Methods	METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT
metrological	QUALITY ASSESSING METHODS OF EQUIPMENT SAMPLES OF THE NATIONAL ECONOMY OF UKRAINE
metrological characteristics of measuring equipment	Methods for determining the recalibration intervals of measuring equipment during their operation
metrological compatibility	Data processing in determining of the gravitational constant obtained by the method of metrologically consistent set (MCS).
metrological complex	Estimation of the Level of Uncertainty when Reproducing a Unit of Spectral Density of Energy Brightness Based on Temperature Ribbon and Halogen Lamps
metrological maintenance	Features and experience of metrological self-check organisation in multichannel measuring system
metrological self-check	Features and experience of metrological self-check organisation in multichannel measuring system
metrological traceability	Validation of calibration procedures
metrology	Measurements for global trade 18PRT03 MetForTC Traceable measurement capabilities for monitoring thermocouple performance 30 YEARS INTERNATIONAL SCIENTIFIC SYMPOSIUM "METROLOGY AND METROLOGY ASSURANCE"
Metrology Assurance	30 YEARS INTERNATIONAL SCIENTIFIC SYMPOSIUM "METROLOGY AND METROLOGY ASSURANCE"
microcontroller	COLOR MEASUREMENT USING ELECTRONIC COLORIMETER
milling operations	Strategy for Shortened Manufacturing cycle of mold tool in extremely short terms
mineralization	Conductometry of natural waters in pulsed electric field with rising strength
model approach	Error vs Uncertainty. Mathematical, terminological and conceptual aspects of evaluating the characteristics of measurement accuracy
mold tool	Strategy for Shortened Manufacturing cycle of mold tool in extremely short terms
monitoring	Optimization of the activities in the metrological laboratory is the implementation of the metrological software MET / TEAM
Monte Carlo method	Measurement uncertainty evaluation by kurtosis method at calibration of a household water meter Error vs Uncertainty. Mathematical, terminological and conceptual aspects of evaluating the characteristics of measurement accuracy
moving objects	DYNAMIC ERRORS EVALUATION AND CORRECTION ALGORITHM
multichannel measuring system	Features and experience of metrological self-check organisation in multichannel measuring system
multimedia processing	Measuring Multimedia Content Proximity via Artificial Intelligence Methods
multiprobe microwave multimeter	Multiprobe microwave multimeter sensor signal iterative processing
N
natural water	Conductometry of natural waters in pulsed electric field with rising strength
NC programing	Strategy for Shortened Manufacturing cycle of mold tool in extremely short terms
NEDC	Measurement of the Efficiency of Electric Vehicle Charging Stations
neural network	Measuring Multimedia Content Proximity via Artificial Intelligence Methods
non-contact DC meters	DEVELOPMENT, RESEARCH AND OPTIMIZATION OF CONTACTLESS DC METERS
Non-destructive information parameters	Study on the Structure and Composition of new Ferromagnetic Materials with an Automated System for Complex Non-destructive Testing
non-physical quantities	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
norm	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
NPM - neodymium permanent magnets	Study on the Structure and Composition of new Ferromagnetic Materials with an Automated System for Complex Non-destructive Testing
O
On-Load Tap-Changer	Control Systems for On-Load Tap-Changers
open-ended questions	Cartography of Emotions and a Modern View of Elements
optical radiation	Estimation of the Level of Uncertainty when Reproducing a Unit of Spectral Density of Energy Brightness Based on Temperature Ribbon and Halogen Lamps
optimal design	DEVELOPMENT, RESEARCH AND OPTIMIZATION OF CONTACTLESS DC METERS
optimal plan	METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT
orthogonal Boolean function	Verification of automatic logic control systems on FPGA by analyzing the correctness of state diagrams of control finite state machines Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines
Orthogonal Hall	Hall Sensor with Geometry-enhanced Sensitivity
P
photodiodes	COLOR MEASUREMENT USING ELECTRONIC COLORIMETER
PLANT POLLEN	“SafeAir” Software to Analyze Air for Allergen Content
Plexiglas	Development of Panels of Recyclable Materials to Improve Energy Efficiency During the Winter Season Study of a Panel of Recyclable Materials to Improve Energy Efficiency During the Winter Season
polyharmonic signal	Application of the method based on the averaging of the squares of samples for the RMS measurement of nonsinusoidal signals
power factor	Calibration of power quality analyzers on total harmonic distortion by standard periodic non-harmonic signals
power plant	Electrical power stations design features and verification problems for busbar current transformers
power quality analyzers	Calibration of power quality analyzers on total harmonic distortion by standard periodic non-harmonic signals
Power Transformer	Control Systems for On-Load Tap-Changers
primary standard	Electrical power stations design features and verification problems for busbar current transformers
Prior uncertainty	The features of application of adaptive methods of continuous planning of the process of diagnosis of the analogue and analogue-digital systems
prototype	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
pulsed electric field	Conductometry of natural waters in pulsed electric field with rising strength
Q
quantization noise	Influence of Voltage and Current Samples Errors on the Reactive Power Measurement Error
R
radiation source	Estimation of the Level of Uncertainty when Reproducing a Unit of Spectral Density of Energy Brightness Based on Temperature Ribbon and Halogen Lamps
Reactive power	Influence of Voltage and Current Samples Errors on the Reactive Power Measurement Error
Reed sensor	Integrated Fuel Quantity Measurement
reference value	Data processing in determining of the gravitational constant obtained by the method of metrologically consistent set (MCS).
reinforced concrete	Testing of concrete by contactless non-destructive tomographic method DETERMINATION OF SPECIFIC ELECTRICAL RESISTANCE AND CARBONATION DEPTH OF CONCRETE IN REINFORCED CONCRETE ELEMENTS
reinforcement	DETERMINATION OF SPECIFIC ELECTRICAL RESISTANCE AND CARBONATION DEPTH OF CONCRETE IN REINFORCED CONCRETE ELEMENTS
Robotized surgery	Hall Sensor with Geometry-enhanced Sensitivity
robust criterion-algorithm	ROBUST INTERVAL CRITERION FOR A STEADY VALUE
root mean square	Application of the method based on the averaging of the squares of samples for the RMS measurement of nonsinusoidal signals
rule based algorithm	Measuring Multimedia Content Proximity via Artificial Intelligence Methods
S
short terms	Strategy for Shortened Manufacturing cycle of mold tool in extremely short terms
signal processing	Multiprobe microwave multimeter sensor signal iterative processing
simulation modeling	Application of the method based on the averaging of the squares of samples for the RMS measurement of nonsinusoidal signals Influence of Voltage and Current Samples Errors on the Reactive Power Measurement Error
simulation sickness	Factor Analysis for Humandependent Factors Received in actions in a Virtual Reality
six-port reflectometer	Multiprobe microwave multimeter sensor signal iterative processing
sliding regression	Methods for determining the recalibration intervals of measuring equipment during their operation
smart production	DIGITAL AGRICULTURE INDUSTRY – DEVELOPMENT OF SUSTAINABLE STRATEGIES FOR INDUSTRY AUTOMATIZATION
SORT	Measurement of the Efficiency of Electric Vehicle Charging Stations
Spondilogram	Methods for assessing the degree of the deformation of the vertebral bodies
standards	Optimization of the activities in the metrological laboratory is the implementation of the metrological software MET / TEAM
standrads	DOUBLE REVERSE METHOD FOR CALIBRATION OF PERPENDICULAR STANDARDS
state diagram	Verification of automatic logic control systems on FPGA by analyzing the correctness of state diagrams of control finite state machines Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines
static characteristics	Virtual measurement system for length measurement based on VIO
strength	Conductometry of natural waters in pulsed electric field with rising strength
stylus instruments	18PRT01 Probe Trace Traceability for contact probes and stylus instruments measurements
surface specific electrical resistance	DETERMINATION OF SPECIFIC ELECTRICAL RESISTANCE AND CARBONATION DEPTH OF CONCRETE IN REINFORCED CONCRETE ELEMENTS
SYMPOSIUM	30 YEARS INTERNATIONAL SCIENTIFIC SYMPOSIUM "METROLOGY AND METROLOGY ASSURANCE"
synthesis	Verification of automatic logic control systems on FPGA by analyzing the correctness of state diagrams of control finite state machines Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines
T
temperature	Virtual Measurement System for Simultaneous Records of the Temperature Change from Multiple Transducers
temperature ribbon lamp	Estimation of the Level of Uncertainty when Reproducing a Unit of Spectral Density of Energy Brightness Based on Temperature Ribbon and Halogen Lamps
The analytic model of vertebra's body	Methods for assessing the degree of the deformation of the vertebral bodies
The computer-aided system	Methods for assessing the degree of the deformation of the vertebral bodies
the duration of the observation interval	ROBUST INTERVAL CRITERION FOR A STEADY VALUE
the duration of the transition process	ROBUST INTERVAL CRITERION FOR A STEADY VALUE
The structure model of vertebra's body	Methods for assessing the degree of the deformation of the vertebral bodies
thermocouple	18PRT03 MetForTC Traceable measurement capabilities for monitoring thermocouple performance
Thyristor Control	Control Systems for On-Load Tap-Changers
time	Cartography of Emotions and a Modern View of Elements
tomographic method	Testing of concrete by contactless non-destructive tomographic method
traceable measurement	18PRT03 MetForTC Traceable measurement capabilities for monitoring thermocouple performance
transducer	Virtual Measurement System for Simultaneous Records of the Temperature Change from Multiple Transducers
transient increment analysis	ROBUST INTERVAL CRITERION FOR A STEADY VALUE
U
uncertainty	Estimation of the Level of Uncertainty when Reproducing a Unit of Spectral Density of Energy Brightness Based on Temperature Ribbon and Halogen Lamps Data processing in determining of the gravitational constant obtained by the method of metrologically consistent set (MCS). DEVELOPMENT, RESEARCH AND OPTIMIZATION OF CONTACTLESS DC METERS
update	Multiprobe microwave multimeter sensor signal iterative processing
V
Vacuum Interrupter	Control Systems for On-Load Tap-Changers
Validation	Validation of calibration procedures
Vehicle	Measurement of the Efficiency of Electric Vehicle Charging Stations
verification	Electrical power stations design features and verification problems for busbar current transformers
VIO	Virtual measurement system for length measurement based on VIO
virtual	Virtual Measurement System for Simultaneous Records of the Temperature Change from Multiple Transducers
virtual reality	Factor Analysis for Humandependent Factors Received in actions in a Virtual Reality
Virtual sensors	Virtual measurement system for length measurement based on VIO
virtual tests	Features and experience of metrological self-check organisation in multichannel measuring system
W
WLTP	Measurement of the Efficiency of Electric Vehicle Charging Stations
Д
Дължина на общата нормала на зъбно колело	IMPROVEMENT OF MICROMETER-NORMALMETER FOR CONTROL OF GEARS IN HEAVY ENGINEERING
К
Контрол на зъбни колела с голям модул	IMPROVEMENT OF MICROMETER-NORMALMETER FOR CONTROL OF GEARS IN HEAVY ENGINEERING
П
Подобрение на микрометричен нормаломер	IMPROVEMENT OF MICROMETER-NORMALMETER FOR CONTROL OF GEARS IN HEAVY ENGINEERING
С
Специализирано средство за измерване	IMPROVEMENT OF MICROMETER-NORMALMETER FOR CONTROL OF GEARS IN HEAVY ENGINEERING

Disclaimer | Powered by EasyChair Smart Program