MMA 2020: IEEE XXX INTERNATIONAL SCIENTIFIC SYMPOSIUM 'METROLOGY AND METROLOGY ASSURANCE' 2020

A
Abzhuev, Oleg	Estimation of the Level of Uncertainty when Reproducing a Unit of Spectral Density of Energy Brightness Based on Temperature Ribbon and Halogen Lamps
Afzali, Julius	Virtual Measurement System for Simultaneous Records of the Temperature Change from Multiple Transducers Development of Panels of Recyclable Materials to Improve Energy Efficiency During the Winter Season Study of a Panel of Recyclable Materials to Improve Energy Efficiency During the Winter Season
Akhmeev, Andrey	Electrical power stations design features and verification problems for busbar current transformers
Aldev, Kostadin	18PRT03 MetForTC Traceable measurement capabilities for monitoring thermocouple performance
B
Baksheeva, Iuliia	Features and experience of metrological self-check organisation in multichannel measuring system
Banev, Kiril	Optimization of the activities in the metrological laboratory is the implementation of the metrological software MET / TEAM
Bekhtin, Yuri	ROBUST INTERVAL CRITERION FOR A STEADY VALUE
Bekirov, Ali	DEVELOPMENT, RESEARCH AND OPTIMIZATION OF CONTACTLESS DC METERS METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT
Beliaieva, Anna	DEVELOPMENT, RESEARCH AND OPTIMIZATION OF CONTACTLESS DC METERS
Blagov, Ivaylo	Conductometry of natural waters in pulsed electric field with rising strength Measuring Multimedia Content Proximity via Artificial Intelligence Methods
Borisov, Biser	Optimization of the activities in the metrological laboratory is the implementation of the metrological software MET / TEAM
Bosilkov, Krasimir	Optimization of the activities in the metrological laboratory is the implementation of the metrological software MET / TEAM
Botsiura, Olesia	Error vs Uncertainty. Mathematical, terminological and conceptual aspects of evaluating the characteristics of measurement accuracy
Burmistrova, Natalia	Data processing in determining of the gravitational constant obtained by the method of metrologically consistent set (MCS).
C
Chalyi, Igor	Measuring Multimedia Content Proximity via Artificial Intelligence Methods
Chelak, Viktor	RESEARCH OF INTELLIGENT DATA ANALYSIS METHODS FOR IDENTIFICATION OF COMPUTER SYSTEM STATE
Chunikhina, Tetiana	Measurement uncertainty evaluation by kurtosis method at calibration of a household water meter
Chunovkina, Anna	Validation of calibration procedures Data processing in determining of the gravitational constant obtained by the method of metrologically consistent set (MCS).
Cvetanov, Genadi	DYNAMIC ERRORS EVALUATION AND CORRECTION ALGORITHM
D
Deliyski, Radoslav	Virtual measurement system for length measurement based on VIO
Diakov, Dimitar	30 YEARS INTERNATIONAL SCIENTIFIC SYMPOSIUM "METROLOGY AND METROLOGY ASSURANCE" DOUBLE REVERSE METHOD FOR CALIBRATION OF PERPENDICULAR STANDARDS DYNAMIC ERRORS EVALUATION AND CORRECTION ALGORITHM
Dichev, Dimitar	DYNAMIC ERRORS EVALUATION AND CORRECTION ALGORITHM
Dicheva, Ralitza	DYNAMIC ERRORS EVALUATION AND CORRECTION ALGORITHM
Didik, Iurii	Electrical power stations design features and verification problems for busbar current transformers
Dzhudzhev, Bozhidar	Virtual Measurement System for Simultaneous Records of the Temperature Change from Multiple Transducers Study on the Structure and Composition of new Ferromagnetic Materials with an Automated System for Complex Non-destructive Testing Development of Panels of Recyclable Materials to Improve Energy Efficiency During the Winter Season Study of a Panel of Recyclable Materials to Improve Energy Efficiency During the Winter Season
E
Elenkov, Andrey	DIGITAL AGRICULTURE INDUSTRY – DEVELOPMENT OF SUSTAINABLE STRATEGIES FOR INDUSTRY AUTOMATIZATION
F
Filipenko, Inna	Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines
G
Galabov, Krasimir	Calibration of power quality analyzers on total harmonic distortion by standard periodic non-harmonic signals
Gavalyugov, Veselin	18PRT01 Probe Trace Traceability for contact probes and stylus instruments measurements
Gavrilov, Todor	Strategy for Shortened Manufacturing cycle of mold tool in extremely short terms
Gavrylenko, Svitlana	RESEARCH OF INTELLIGENT DATA ANALYSIS METHODS FOR IDENTIFICATION OF COMPUTER SYSTEM STATE
Gencheva-Belcheva, Teodora	18PRT01 Probe Trace Traceability for contact probes and stylus instruments measurements
Georgiev, Bonio	Development of Panels of Recyclable Materials to Improve Energy Efficiency During the Winter Season Study of a Panel of Recyclable Materials to Improve Energy Efficiency During the Winter Season
Gladichev, Nikolay	Development of Panels of Recyclable Materials to Improve Energy Efficiency During the Winter Season Study of a Panel of Recyclable Materials to Improve Energy Efficiency During the Winter Season
Gladyshev, Vladimir	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
Golyan, Nataliia	“SafeAir” Software to Analyze Air for Allergen Content
Golyan, Vera	“SafeAir” Software to Analyze Air for Allergen Content
Gourov, Nikolay	Control Systems for On-Load Tap-Changers
Grednovskaya, Elena	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
H
Halchenko, Kyrylo	“SafeAir” Software to Analyze Air for Allergen Content
Hoha, Maksym	Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines
Hornostal, Oleksii	RESEARCH OF INTELLIGENT DATA ANALYSIS METHODS FOR IDENTIFICATION OF COMPUTER SYSTEM STATE
I
Ivanchev, Ivan	DETERMINATION OF SPECIFIC ELECTRICAL RESISTANCE AND CARBONATION DEPTH OF CONCRETE IN REINFORCED CONCRETE ELEMENTS Testing of concrete by contactless non-destructive tomographic method
Ivanov, Avgust	Hall Sensor with Geometry-enhanced Sensitivity
Ivanov, Ivan	Strategy for Shortened Manufacturing cycle of mold tool in extremely short terms
K
Kalimanova, Ivanka	Conductometry of natural waters in pulsed electric field with rising strength
Khoroshailo, Yurii	COLOR MEASUREMENT USING ELECTRONIC COLORIMETER
Klymenko, Liubov	Verification of automatic logic control systems on FPGA by analyzing the correctness of state diagrams of control finite state machines
Kodjabashev, Ivan	30 YEARS INTERNATIONAL SCIENTIFIC SYMPOSIUM "METROLOGY AND METROLOGY ASSURANCE" Calibration of power quality analyzers on total harmonic distortion by standard periodic non-harmonic signals
Kokalarov, Miroslav	IMPROVEMENT OF MICROMETER-NORMALMETER FOR CONTROL OF GEARS IN HEAVY ENGINEERING
Konchalovsky, Ivan	Influence of Voltage and Current Samples Errors on the Reactive Power Measurement Error
Kononov, Vladimir	QUALITY ASSESSING METHODS OF EQUIPMENT SAMPLES OF THE NATIONAL ECONOMY OF UKRAINE
Korniienko, Valentyn	Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines
Koroleva, Yana	Verification of automatic logic control systems on FPGA by analyzing the correctness of state diagrams of control finite state machines
Korolyova, Anastasiya	Validation of calibration procedures
Kosheva, Larysa	Methods for determining the recalibration intervals of measuring equipment during their operation
Koshevaya, Irina	METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT
Koshevoy, Nikolay	DEVELOPMENT, RESEARCH AND OPTIMIZATION OF CONTACTLESS DC METERS METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT
Kostadinov, Petko	Study on the Structure and Composition of new Ferromagnetic Materials with an Automated System for Complex Non-destructive Testing
Kostenko, Elena	DEVELOPMENT, RESEARCH AND OPTIMIZATION OF CONTACTLESS DC METERS METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT
Kotukh, Yevgen	Verification of automatic logic control systems on FPGA by analyzing the correctness of state diagrams of control finite state machines
Kovalenko, Andrey	ROBUST INTERVAL CRITERION FOR A STEADY VALUE
Kovalenko, Sergey	Measuring Multimedia Content Proximity via Artificial Intelligence Methods
Kovalenko, Svіtlana	Measuring Multimedia Content Proximity via Artificial Intelligence Methods
Kulak, Elvira	Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines
Kyaw, Nay	ROBUST INTERVAL CRITERION FOR A STEADY VALUE
L
Lapin, Andrey	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
Levin, Elizabetha	Cartography of Emotions and a Modern View of Elements
Loginov, Vadim	Application of the method based on the averaging of the squares of samples for the RMS measurement of nonsinusoidal signals
Lozanova, Siya	Hall Sensor with Geometry-enhanced Sensitivity
Lupachev, Aleksey	ROBUST INTERVAL CRITERION FOR A STEADY VALUE
M
Makhwathana, Phalanndwa	Integrated Fuel Quantity Measurement
Megel, Yury	Measuring Multimedia Content Proximity via Artificial Intelligence Methods
Mikhnova, Olena	Measuring Multimedia Content Proximity via Artificial Intelligence Methods
Milushev, George	Measurement of the Efficiency of Electric Vehicle Charging Stations
Miroshnyk, Maryna	Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines Multiprobe microwave multimeter sensor signal iterative processing Verification of automatic logic control systems on FPGA by analyzing the correctness of state diagrams of control finite state machines
Miteva, Rositsa	DOUBLE REVERSE METHOD FOR CALIBRATION OF PERPENDICULAR STANDARDS
Morozova, Svetlana	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
Mіroshnyk, Anatolii	Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines Multiprobe microwave multimeter sensor signal iterative processing
N
Nedialkov, Sasho	18PRT03 MetForTC Traceable measurement capabilities for monitoring thermocouple performance
Nikitin, Ivan	Estimation of the Level of Uncertainty when Reproducing a Unit of Spectral Density of Energy Brightness Based on Temperature Ribbon and Halogen Lamps
Nikolova, Hristiana	DOUBLE REVERSE METHOD FOR CALIBRATION OF PERPENDICULAR STANDARDS DYNAMIC ERRORS EVALUATION AND CORRECTION ALGORITHM
P
Pahomov, Yurii	Verification of automatic logic control systems on FPGA by analyzing the correctness of state diagrams of control finite state machines
Pandelova, Antonia	Virtual Measurement System for Simultaneous Records of the Temperature Change from Multiple Transducers Development of Panels of Recyclable Materials to Improve Energy Efficiency During the Winter Season Study of a Panel of Recyclable Materials to Improve Energy Efficiency During the Winter Season
Parvanov, Svetlin	IMPROVEMENT OF MICROMETER-NORMALMETER FOR CONTROL OF GEARS IN HEAVY ENGINEERING
Petsinyarzh, Arkadiy	ROBUST INTERVAL CRITERION FOR A STEADY VALUE
Poroshin, Sergei	Methods for assessing the degree of the deformation of the vertebral bodies The features of application of adaptive methods of continuous planning of the process of diagnosis of the analogue and analogue-digital systems
Pototskiy, Igor	Methods for determining the recalibration intervals of measuring equipment during their operation
R
Rakhlis, Dariia	Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines
Rangelova, Vania	Factor Analysis for Humandependent Factors Received in actions in a Virtual Reality
Rezvushkin, Kirill	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
Roumenin, Chavdar	Hall Sensor with Geometry-enhanced Sensitivity
Rozhnova, Tetiana	DEVELOPMENT, RESEARCH AND OPTIMIZATION OF CONTACTLESS DC METERS METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT
Rybalka, Antonina	Measuring Multimedia Content Proximity via Artificial Intelligence Methods
S
Sakakushev, Boris	IMPROVEMENT OF MICROMETER-NORMALMETER FOR CONTROL OF GEARS IN HEAVY ENGINEERING
Salfetnikova, Juliya	Verification of automatic logic control systems on FPGA by analyzing the correctness of state diagrams of control finite state machines
Sapozhnikova, Kseniia	Features and experience of metrological self-check organisation in multichannel measuring system
Semenenko, Ivan	Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines
Serhiienko, Maryna	Measurement uncertainty evaluation by kurtosis method at calibration of a household water meter
Serov, Andrey	Influence of Voltage and Current Samples Errors on the Reactive Power Measurement Error Application of the method based on the averaging of the squares of samples for the RMS measurement of nonsinusoidal signals
Serov, Andrey	Calibration of power quality analyzers on total harmonic distortion by standard periodic non-harmonic signals
Serov, Nikolay	Influence of Voltage and Current Samples Errors on the Reactive Power Measurement Error Application of the method based on the averaging of the squares of samples for the RMS measurement of nonsinusoidal signals
Shigimaga, Victor	Conductometry of natural waters in pulsed electric field with rising strength
Shkil, Olexandr	Analysis of the state diagram correctness of automatic logic control systems on FPGA Paper finite state machines
Shostak, Bohdan	The features of application of adaptive methods of continuous planning of the process of diagnosis of the analogue and analogue-digital systems
Sofronov, Yavor	Strategy for Shortened Manufacturing cycle of mold tool in extremely short terms
Sokolov, Blagoy	Testing of concrete by contactless non-destructive tomographic method
Sokolova, Hristina	Measurements for global trade
Sosnovskih, Elena	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
Spasova, Snezhana	18PRT03 MetForTC Traceable measurement capabilities for monitoring thermocouple performance
Starev, Valentin	Measurements for global trade
Stoimenov, Nikolay	Testing of concrete by contactless non-destructive tomographic method
Stoyanov, Nikolay	Virtual Measurement System for Simultaneous Records of the Temperature Change from Multiple Transducers Development of Panels of Recyclable Materials to Improve Energy Efficiency During the Winter Season Study of a Panel of Recyclable Materials to Improve Energy Efficiency During the Winter Season
T
Tamakjarska, Denita	18PRT01 Probe Trace Traceability for contact probes and stylus instruments measurements
Taymanov, Roald	Features and experience of metrological self-check organisation in multichannel measuring system
Todorov, Angel	Strategy for Shortened Manufacturing cycle of mold tool in extremely short terms
Todorov, Georgi	Strategy for Shortened Manufacturing cycle of mold tool in extremely short terms
Tsekhovskoi, Maksym	DEVELOPMENT, RESEARCH AND OPTIMIZATION OF CONTACTLESS DC METERS METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT
Tzvetkov, Plamen	Calibration of power quality analyzers on total harmonic distortion by standard periodic non-harmonic signals
U
Usachev, Yuri	Estimation of the Level of Uncertainty when Reproducing a Unit of Spectral Density of Energy Brightness Based on Temperature Ribbon and Halogen Lamps
Usik, Victoriya	Methods for assessing the degree of the deformation of the vertebral bodies The features of application of adaptive methods of continuous planning of the process of diagnosis of the analogue and analogue-digital systems
V
Vassilev, Velizar	DOUBLE REVERSE METHOD FOR CALIBRATION OF PERPENDICULAR STANDARDS
Velev, Boris	Study on the Structure and Composition of new Ferromagnetic Materials with an Automated System for Complex Non-destructive Testing
Viktorov, Ivan	Validation of calibration procedures Data processing in determining of the gravitational constant obtained by the method of metrologically consistent set (MCS).
Volodarsky, Yevhen	Methods for determining the recalibration intervals of measuring equipment during their operation
Voronskaya, Ekaterina	Electrical power stations design features and verification problems for busbar current transformers
W
Wang, Zenghui	Integrated Fuel Quantity Measurement
Y
Yahov, Ilker	DIGITAL AGRICULTURE INDUSTRY – DEVELOPMENT OF SUSTAINABLE STRATEGIES FOR INDUSTRY AUTOMATIZATION
Yarmak, Ivan	COLOR MEASUREMENT USING ELECTRONIC COLORIMETER
Yurasova, Ekaterina	On the issue of setting a standard in non-physical measurement: an interdisciplinary approach
Z
Zabolotnyi, Oleksandr	DEVELOPMENT, RESEARCH AND OPTIMIZATION OF CONTACTLESS DC METERS METHODS AND DEVICES FOR ANGULAR MEASUREMENT MOVEMENT
Zaichenko, Nataliia	Multiprobe microwave multimeter sensor signal iterative processing
Zaichenko, Olga	Multiprobe microwave multimeter sensor signal iterative processing
Zakharov, Igor	Measurement uncertainty evaluation by kurtosis method at calibration of a household water meter Error vs Uncertainty. Mathematical, terminological and conceptual aspects of evaluating the characteristics of measurement accuracy
Zhelezarov, Ilia	DYNAMIC ERRORS EVALUATION AND CORRECTION ALGORITHM
Zlarkov, Martin	Study on the Structure and Composition of new Ferromagnetic Materials with an Automated System for Complex Non-destructive Testing

Disclaimer | Powered by EasyChair Smart Program