RSCE 2024: THE 28TH REGIONAL SYMPOSIUM ON CHEMICAL ENGINEERING

A
Abd Rahman, Norazah	Enhanced Microwave-assisted Oil Extraction of Enzymatic Pre-treated Agarwood Chip
Abdi, Fatwa Firdaus	Leveraging Light and CO2 Emission with Copper and Nickel-Doped TiO2 Photocatalyst for Methanol Production
Abduh, Muhammad Yusuf	Effects of Hydrothermal Pretreatment and Solid-state Fermentation using Trichoderma sp. on Degradation of Lignocellulose and Synthesis of Humic Acid from Corn Cob (Zea mays L.)
Abdul Rahim, Astri Fadhilah	Enhanced Microwave-assisted Oil Extraction of Enzymatic Pre-treated Agarwood Chip
Abdulkadir, Bashir Abubakar	Review of Recent Innovations in Solid Polymer Electrolytes for Enhanced Performance and Stability: Advance in Supercapacitor Technologies Review on Structural Correlations of Magnesium Hydride Confined Hollow Fibrous Nanosilica on the Thermodynamic, Kinetics, and Mechanism of Hydrogen Storage System
Abdullah, Siti Nadia	Stability and Kinetic Study of Immobilized Carbonic anhydrase in PVDF Membrane
Abidin, Akhmad Zainal	Development of Aromatic Anion Exchange Copolymers using Biphenyl and P-Terphenyl Monomers for Solid Electrolytes in Water Electrolysis Cells Study of the Effectiveness and Productivity of MASARO Organic Liquid Fertilizer in Organic Rice Farming Decreasing Heat Loss and Increasing Drying Capacity of LTPM Polydrier Machine
Abu Bakar, Iskandar Zulkarnain	Cobalt and Nickel Ferrite-Enhanced Polysulfone Membranes for Improved Cu (II) Ion Separation and Hydrophilicity
Abu Bakar, Noor Fitrah	Enhanced Microwave-assisted Oil Extraction of Enzymatic Pre-treated Agarwood Chip
Achmad, Feerzet	Evaluation of Several Types of Woody Biomass as Source of Renewable Energy through Gasification Process
Acosta, John Ralph	Exploring the Potential of Agro-Based Natural Fiber Composites for Eco-Friendly Floor Tile Production
Adha, Frizzky Jannahfirra Adelia	Ultrasonic Extraction and Encapsulation of Omega-3 Extract from Purslane (Portulaca oleraceae) Leaves using a Spray Dryer
Adhi, Fajar Reksaning	Process Systems Engineering Framework for Biofuel Production using Aspen Plus: A Comprehensive Review Optimizing Plant-Wide Process Control for Ultra-Low Mercury Removal from Crude Oil
Adhi, Tri Partono	Optimizing Plant-Wide Process Control for Ultra-Low Mercury Removal from Crude Oil
Adhi, Tri Partono	Nitrogen Cyclone and Nitrogen Scrubber Modeling: Effect of Cyclone Geometrical Parameters and Scrubber Tray Configurations on the Production Capacity of Polypropylene Resin Techno-economic Study of Hydrogen Production Methods
Adhi, Tri Partono	Improving Feed Definition for Deasphalting Simulation: Towards a Validated and Accurate Model
Adhi, Tri Partono	Production of Bio-hydrocarbons through Oxidative Decarboxylation of Fatty Acids Using Biomimetic Catalysis
Adhi, Tri Partono	Hydrolytic Extraction and Biomimetic Catalysis of Hemicellulose from Water Hyacinth Holocellulose Using Glutamic Acid
Adhi, Tri Partono	Biogas Conversion via Liquid Phase Oxidation: An Investigation into Methane and Carbon Dioxide Utilization for Formic Acid Production
Adhi, Tri Partono	Biomimetic Hydrolysis of Water Hyacinth Cellulose to Glucose
Adhi, Tri Partono	Sustainable Auto-Oxidation of Glucose to Ethyl Formate in Ethanol: Pathways for Hydrogen Storage and Future Energy Applications through Formic Acid Derivatives
Adinda, Pasca Ryan	The Effect of Ca/Mg/Zn/Cr Ratio on the Caracteristic of Layer Double Hydroxide with Copresipitation Method
Adisasmito, Sanggono	Techno-Economic Evaluation of Post-Combustion Carbon Capture on Subcritical Coal-Fired Power Plant in Indonesia Techno-Economic Evaluation of Low Carbon Ammonia Co-firing in Existing Coal Fired Power Plant
Adisasmito, Sanggono	Formulation and Production of Feed Pellets using Organic Waste Materials in Bajawa Disctrict, Ngada Regency, East Nusa Tenggara
Aditama, Sukirno	Effect of Soap Percentage on the Characteristic of Biogrease SulfoOle Composed with Combined Soap Calcium Oleate Complex and Calcium Sulfonate Overbased Modification of Palm Oil and Oleic Acid via Epoxidation-Hydroxylation-Esterification Processes for Obtaining Improved Performance of Biolube and Thickener Components for Biogrease
Adschiri, Tadafumi	Preparation of Microcrystalline Cellulose from Wood Waste Sawdust Employing Hydrothermal Alkaline at Subcritical Water Condition
Adyatama, Rofiq	Techno-economic Analysis of Utilization Biogas from POME as Coal Co-firing in Steam Power Plants to Reduce Carbon Emissions
Agung Wahyuono, Ruri	Physical Characteristics of Mesoporous WO3/SiO2 Composite Particle for Enhanced Photocatalytic Degradation of Rhodamine-B and Crystal Violet
Agustina, Sri	Effect of Modified Carboxymethylcellulose Nanoparticles Fortification on the Physical and Sensory Characteristic of Taro Noodles
Ahmad, Eka Fitriani	Risk Based Inspection on Erosion Rate Modeling of Transmission Pipeline Material at PT X Siak using Ansys Software Pre-Fire Planning Analysis with LOP Strategy Based on Shipping Tank Fire Modeling using WRPLOT and ALOHA (Case Study: Gathering Station X PT X Bumi) Analysis of Cellulose, Hemicellulose and Lignin Compsition in West Java and Banten Coconut Fiber: Chesson Method
Aim, Mia Nuramalia	Sustainable Low Temperature Solar Thermal Energy Collector and Storage
Ainur Rahmah, Lisa	Effect of Chitosan Addition on The Mechanical Properties and Antibacterial Activity of Polylactic Acid (PLA)/Cellulose Acetate (CA) Based Film Composites
Aji, Dimas Danindro Dewanto	Formulation of Lignosulfonate Surfactant with Isoamyl Alcohol for Enhanced Oil Recovery
Akhirjulima, Rinzan	Improving Feed Definition for Deasphalting Simulation: Towards a Validated and Accurate Model
Akhmaloka, Akhmaloka	Production of Biodiesel from Cooking Oil using Immobilized Lipase Itb1.1 Synthetic Cellulose Nanofiber (CNF) by Electrospinning for Matrix Immobilized Enzyme Immobilization of Recombinant Lipase onto Nickel Foam
Al Aziz, Muhammad Daffa	Effect of Modified Carboxymethylcellulose Nanoparticles Fortification on the Physical and Sensory Characteristic of Taro Noodles
Al Fatony, Zaky	Exploratory Data Analysis of FCC Catalyst: A Simulation-Based Study using Aspen HYSYS
Alagesan, Alpravinta	Effects of Wastewater Parameters on the Growth and Behavioral Characteristics of Chlorella sp.
Alfafara, Catalino	Parametric and Optimization Study on the Chemical Activation of Durian Shell-derived Biochar for Phytohormone Extraction from Waste Coconut Water Adsorption of Phytohormones from Waste Coconut Water using Optimally Activated Biochar from Sugarcane Bagasse Preparation of Rice Husk-Derived Activated Biochar for Phytohormone Extraction from Waste Coconut Water via Adsorption
Alfanio, Thomas Yoga	Nitrogen Cyclone and Nitrogen Scrubber Modeling: Effect of Cyclone Geometrical Parameters and Scrubber Tray Configurations on the Production Capacity of Polypropylene Resin
Alfardan, Ahmad	Saprolitic Ore Reduction using Torrefied Biomass for Ferronickel Production
Alfina, Nor	Surface Characteristics of PVDF Membranes using PEG and Non-PEG
Alhaqie, Ardika Dhafka	Formulation of Lignosulfonate Surfactant with Isoamyl Alcohol for Enhanced Oil Recovery
Ali Tri Bastian Putra, Nabil	Effect of Chitosan Addition on The Mechanical Properties and Antibacterial Activity of Polylactic Acid (PLA)/Cellulose Acetate (CA) Based Film Composites
Alif Syahjaya, Farhan	Effect of Chitosan Addition on The Mechanical Properties and Antibacterial Activity of Polylactic Acid (PLA)/Cellulose Acetate (CA) Based Film Composites
Alwan, Hafid	From Waste to Energy: Optimizing Organic-Solid-Refused-Fuel (OSRF) for Sustainable Power Generation.
Amarwati, Anis	Insight Mechanisms of Nitrate-Nitrogen Adsorption into Palm Oil Wastewater Sludge-Modified Acticated Carbon
Amelia, Tiara	Study of the Effectiveness and Productivity of MASARO Organic Liquid Fertilizer in Organic Rice Farming
Amelly, Yemicca	Pretreatment of Oil Palm Empty Fruit Bunch using Green Organosolvent in Acid and Base Environment
Anandhita, Eva Monica	Sustainable Low Temperature Solar Thermal Energy Collector and Storage
Anderson, Reinhardt	Valorization of Oil Palm Trunk (OPT) Waste from Replantation as Feedstock for Black Soldier Fly (BSF) Larvae
Andika, Riezqa	Examining the Completeness for the Process Hazards Analysis Study Result – Evaluation of Safeguards Identification A Review of Anti-surge Control Systems of Centrifugal Compressors
Andraini, Alvira	Bio-Oil Conversion From Oil Palm Trunk: Impact of Activated Zeolite Catalyst on Functionalize Properties
Anggara, Ferian	Kinetic Modeling of Oxidation Low-ranked Coal with Hydrogen Peroxide
Anggaswara, Rezky Oktaviandy	Study of Hydrothermal Synthesis Condition of Fluid Catalytic Cracking Active Matrix from Metakaolin
Anggoro, Didi Dwi	Hybrid Ultrasound and Advanced Oxidation Process Regeneration of Spent RFCC Catalysts: Optimization and Catalytic Performance
Ani, Suci Fitri	Microwave-assisted Hydro-distillation of Clove Oil from Flower Plant (Syzygium Aromaticum) for Aromatherapy candles
Anindita Setyorini, Anindita Setyorini	Modification of Palm Oil and Oleic Acid via Epoxidation-Hydroxylation-Esterification Processes for Obtaining Improved Performance of Biolube and Thickener Components for Biogrease
Ansari, Azka	Microsoft Excel in Chemical Engineering Education A Tool in Predicting Gasification Products
Anshori, Fauzan	Risk Based Inspection on Erosion Rate Modeling of Transmission Pipeline Material at PT X Siak using Ansys Software
Anugraha, Rendra Panca	Conceptual Study of CO2 Injection in Geological Storage to Support Carbon Capture and Storage (CCS) Program in Indonesia Simulation of Carbon Capture Technology using Pressure Swing Adsorption from High CO2 Content of Gas Wells in Indonesia Techno-Economic Analysis of Methanol Production from Low Grade Crude Glycerol in Indonesia
Anwari, Ropi	From Waste to Energy: Optimizing Organic-Solid-Refused-Fuel (OSRF) for Sustainable Power Generation.
Apoenx, Christ J C W	Adsorption Study of Bovine Serum Albumin onto Gallic Acid Modified Fe3O4 Nanoparticles
Aprilia, Elsa Dwi	Thermal Degradation Kinetics of Polyvinyl Chloride Stabilized with Palm Based Mixed Metal Carboxylates
Aqsa, Aqsa	Biogas Conversion via Liquid Phase Oxidation: An Investigation into Methane and Carbon Dioxide Utilization for Formic Acid Production
Aqsha, Aqsha	Hydrothermal Treatment for Reducing Potassium Content in Solid Fuels Derived from Oil Palm Frond
Ardy, Aisyah	Direct Synthesis of Dimethyl Ether using Batch Reactor
Arief, Ivan Zainul	Optimization of Cone Angle and Inlet Pipe Diameter in Spouted Bed Sorghum Grain Dryer using Computational Fluid Dynamics Method
Ariffin, Azman	Experimental Validation of the Water Quality Obtained from a Simple, Inexpensive Portable UF (PUF) System
Ariyanto, Teguh	Synthesis of Ternary Nanocomposites of MnO2/PANI/Maxsorb and Their Performance as an Electrode Material for Supercapacitors
Aryapratama, Rio	Project Based Approach for Teaching Life Cycle Assessment for Graduate Student of Chemical Engineering
As, Fauzy Faisal Awaludin	Sustainable Auto-Oxidation of Glucose to Ethyl Formate in Ethanol: Pathways for Hydrogen Storage and Future Energy Applications through Formic Acid Derivatives
Ashida, Ryuichi	Effects of Proton Concentration in the Reaction of Cellulose with Vanadyl Ions Influences of micropores on mesopore formation in synthesis of mesoporous carbon using nano iron oxide catalysts
Astuti, Widi	Potassium Extraction from Sanidine Ore using Acid Leaching
Atro Auriyani, Wika	Hydrothermal Treatment for Reducing Potassium Content in Solid Fuels Derived from Oil Palm Frond
Aulia, Anisa Fatma	Optimization of Cone Angle and Inlet Pipe Diameter in Spouted Bed Sorghum Grain Dryer using Computational Fluid Dynamics Method
Aulia, Fauzan	Sonication-Assisted Synthesis and Characterization of Magnetic Iron Oxide Nanoparticles
Aulia, Hanief	Modelling of Coke Deposition on Cracking Catalyst Base on Y Zeolite in n-Butanol Dehydration
Auliarahma, Elvira	Effect of Modified Carboxymethylcellulose Nanoparticles Fortification on the Physical and Sensory Characteristic of Taro Noodles
Auresenia, Joseph	Photocatalytic Degradation of Petroleum Organic Pollutants (BTX) using Flourine-doped TiO 2 on Activated Carbon Under Visible Irradiation
Aviso, Kathleen	Deep Decarbonization Pathway of the Cement Industry in ASEAN
Awi, Azree Azhar	Modelling and Experimental Study for an Interfacial Solar Vapour Generation System for Seawater Purification
Awnez Falihi, Hamzah	Towards Sustainable Aviation Fuel: Exploring PdMo/Zeolite Catalysts for FAME Hydrodeoxygenation and Technoeconomic Feasibility
Ayu Pramesti, Diah	Preparing Human Resources to Build Process Safety Competency
Azad, Abul	Enhancing Bio-Char Calorific Value through Catalytic Pyrolysis: The Role of Magnesium Oxide-Zeolite Based Catalysts
Azarya, Eblin Alle	Integrated CFD and ASPEN Plus Simulation for Optimizing Biomass Combustion: A Study on Sugarcane Bagasse
Azis, Muhammad Mufti	Project Based Approach for Teaching Life Cycle Assessment for Graduate Student of Chemical Engineering Formulation of Lignosulfonate Surfactant with Isoamyl Alcohol for Enhanced Oil Recovery Life Cycle Assessment of Kraft Pulp Production through Compact Cooking and Lo-Solids Technology Pre-Hydrolysis Kraft Pulp Reactivity Enhancement through Deep Eutectic Solvent for a Sustainable Viscose Production
Azizul, Sabrina Zahra	Modelling and Experimental Study for an Interfacial Solar Vapour Generation System for Seawater Purification
Azzahra, Fitria	Decreasing Heat Loss and Increasing Drying Capacity of LTPM Polydrier Machine
B
Bagus Oka Lyong Budhatama, Ida	Preparing Human Resources to Build Process Safety Competency
Bakar, Saifullah	Enhancing Bio-Char Calorific Value through Catalytic Pyrolysis: The Role of Magnesium Oxide-Zeolite Based Catalysts
Bari, Asaduddin	Soil Washing using Green Surfactants for Remediation of Oil-contaminated Soil
Bautista, Meryll Hannah	The Effect of Electrolyte Temperature and Variable Charging and Discharging Current Densities in the Performance of a Lab-scale Vanadium Redox Flow Battery
Belo, Lawrence	The Effect of Electrolyte Temperature and Variable Charging and Discharging Current Densities in the Performance of a Lab-scale Vanadium Redox Flow Battery
Beslar, Patricia Yohana	Optimizing Fungal Bioleaching for High-yield Recovery of Cobalt and Lithium from Spent Batteries
Bianasari, Alien	Enhancing Bio-Char Calorific Value through Catalytic Pyrolysis: The Role of Magnesium Oxide-Zeolite Based Catalysts
Bin Mohamad Rosli, Muhammad Aiman	Chemical Characteristic of the Surface Modification of Eco-Processed Pozzolan (EPP) using Amine Solution
Binag, Christina	The Effect of Electrolyte Temperature and Variable Charging and Discharging Current Densities in the Performance of a Lab-scale Vanadium Redox Flow Battery
Binas, Abigail A.	Removal of Microplastics using Integrated Magnetic Fe3O4 Nanoparticles Extraction and Layered Filtration Process
Bochari, Khalfan	Microsoft Excel in Chemical Engineering Education A Tool in Predicting Gasification Products
Buchori, Luqman	Hybrid Ultrasound and Advanced Oxidation Process Regeneration of Spent RFCC Catalysts: Optimization and Catalytic Performance
Budhi, Yogi Wibisono	Production of Biodiesel from Cooking Oil using Immobilized Lipase Itb1.1
Budhi, Yogi Wibisono	Low Loading Copper Based Catalyst with Cerium Oxide Support for Medium-Temperature Water Gas Shift Reaction H2 Production through Water Gas Shift Reaction at Medium Temperature using Cu/MCM-41 Nanocatalysts Synthetic Cellulose Nanofiber (CNF) by Electrospinning for Matrix Immobilized Enzyme Thermodynamics, Mass-Energy Balances, and Kinetics Studies of Microalgae Biomass Production System Immobilization of Recombinant Lipase onto Nickel Foam Synthesis and Characterization of Pd-Ag Membranes via a Modified Electroless Plating Method
Budiman, Arief	Effect of Acidic, Neutral, and Alkaline Condition on Biocrude Oil Production from Hydrothermal Liquefaction of Spirulina Platensis Residue
Bulin, Christiani Dewi Q.M.	Process Sequences Optimization of Chitosan Extraction from Black Soldier Fly Cocoon
Bunda, Denisa Putri	Improving the Production Quality of Palm Kernelamidopropyl Betaine (PKAPB) from Splitted Palm Kernel Fatty Acid (SPKFA)
Burhan, Khairul Hadi	Effects of Hydrothermal Pretreatment and Solid-state Fermentation using Trichoderma sp. on Degradation of Lignocellulose and Synthesis of Humic Acid from Corn Cob (Zea mays L.)
C
Cahyono, Rochim B	Utilizing Low-Quality Lignite Coal for Syngas Production via CO2 Gasification
Calvin, Steve	Techno-Economic Evaluation of Low Carbon Ammonia Co-firing in Existing Coal Fired Power Plant
Camayra Jr, Mauricio	An Analysis of the Photocatalytic Degradation of Pharmaceutical and Personal Care Products Utilizing Different Nano-enabled Photocatalysts
Candelaria, Suzeth Neicol A.	Production of Biodiesel from Single-use Mixed Plastic Wastes through Pyrolysis and Subcritical Transesterification
Capunitan, Jewel	Parametric Study on the Hydrothermal Synthesis of Fluorescent P-doped Carbon Quantum Dots from Banana Peels (Musa acuminata) and Their Photocatalytic Performance towards Hexavalent Chromium Reduction
Carpio, Rowena	Parametric Study on the Hydrothermal Synthesis of Fluorescent P-doped Carbon Quantum Dots from Banana Peels (Musa acuminata) and Their Photocatalytic Performance towards Hexavalent Chromium Reduction
Castillo, Katrina Joy	Adsorption of Phytohormones from Waste Coconut Water using Optimally Activated Biochar from Sugarcane Bagasse
Castor, Nerita	Efficient Removal of Microplastic using Devitalized Bog Moss (Sphagnum palustre) Enhanced Filter System
Chandra, Andy	Improving the Quality of Robusta Kelir Bean: Optimization of Ultrasound-assisted Extraction Process Parameters using Response Surface Methodology
Chandra, Dhamala Shobita	Influence of Alkenyl Succinic Anhydride (ASA) on Paper Print Quality
Chandra, Nicholas	Comprehensive Kinetic Study on The Acid Catalyzed Conversion of Xylose and Furfural in Water
Chang, Ivan	Cobalt and Nickel Ferrite-Enhanced Polysulfone Membranes for Improved Cu (II) Ion Separation and Hydrophilicity
Cheng, Kai Hung	Electrolyte Effects in Ethanol Electro-reforming in Acidic Electrolytes
Choirunisa, Anjani	Simulation and Optimization of Simultaneously Acid Gas and Mercaptans Removal System using Amine-blend Solvents
Choirunisa, Latifa	Ultrasonic Extraction and Encapsulation of Omega-3 Extract from Purslane (Portulaca oleraceae) Leaves using a Spray Dryer
Choirunnisa, Nur Afifah	Determination of Optimal Operating Conditions for Furfural Production from Xylan using Cyclopentyl Methyl Ether/Deep Eutectic Solvent Optimization of Xylan Conversion into Furfural using DES/Dichlorometana Solution and AlCl3.6H2O Catalyst with a Biphasic System
Christabel, Vanessa	Characterization of Activated Carbon as an Adsorbent for Carbon Dioxide Removal in Biogas Upgrading Application
Christian S., Axel A.	Enhanced Ethylene Conversion to Gasoline-range Liquid Hydrocarbons via PEG-Modified Zeolite Catalysts
Chung, Hoi Ying	Leveraging Light and CO2 Emission with Copper and Nickel-Doped TiO2 Photocatalyst for Methanol Production
Claus, Christian	Parametric Study on the Hydrothermal Synthesis of Fluorescent P-doped Carbon Quantum Dots from Banana Peels (Musa acuminata) and Their Photocatalytic Performance towards Hexavalent Chromium Reduction
Cognet, Patrick	Enhanced Furfural Production from Raw Biomass using Formic Acid as a Solvent and Catalyst: Optimization and Extraction Methods
Cordiner, Joan	Exploration of CALF-20’s Structural Flexibility and CO2 Capture Performance in the Presence of Humidity via Experiments and Simulations
Culaba, Alvin	The Effect of Electrolyte Temperature and Variable Charging and Discharging Current Densities in the Performance of a Lab-scale Vanadium Redox Flow Battery
D
Dai, Chun'Ai	Comprehensive Kinetic Study on The Acid Catalyzed Conversion of Xylose and Furfural in Water
Damajanti, Neni	Wastewater Treatment of Chemical Engineering Basic Instructional Laboratory at University of Muhammadiyah Purwokerto by Adsorption Method using Chitosan as an Adsorbent
Damayanti, Demietrya Renata Sashi	Effect of Modified Carboxymethylcellulose Nanoparticles Fortification on the Physical and Sensory Characteristic of Taro Noodles
Danella, Audrey	Techno-Economic Evaluation of Low Carbon Ammonia Co-firing in Existing Coal Fired Power Plant
Darwin, Darwin	Preparing Human Resources to Build Process Safety Competency
De Leon, Maribby	Efficient Removal of Microplastic using Devitalized Bog Moss (Sphagnum palustre) Enhanced Filter System
Deandra, Putu	Process Sequences Optimization of Chitosan Extraction from Black Soldier Fly Cocoon
del Barrio, Marilyn	Parametric Study on the Hydrothermal Synthesis of Fluorescent P-doped Carbon Quantum Dots from Banana Peels (Musa acuminata) and Their Photocatalytic Performance towards Hexavalent Chromium Reduction
Delos Santos, Ciara Angela M.	Production of Biodiesel from Single-use Mixed Plastic Wastes through Pyrolysis and Subcritical Transesterification
Desfitri, Erda Rahmilaila	Changes in Dissolved Organic Matter during POME Treatment using DBD Plasma System Evaluated by Fluorescence Excitation-emission Matrix Analysis
Desmiarti, Reni	Insight Mechanisms of Nitrate-Nitrogen Adsorption into Palm Oil Wastewater Sludge-Modified Acticated Carbon Changes in Dissolved Organic Matter during POME Treatment using DBD Plasma System Evaluated by Fluorescence Excitation-emission Matrix Analysis
Detras, Monet Concepcion	Parametric and Optimization Study on the Chemical Activation of Durian Shell-derived Biochar for Phytohormone Extraction from Waste Coconut Water Parametric Study on the Hydrothermal Synthesis of Fluorescent P-doped Carbon Quantum Dots from Banana Peels (Musa acuminata) and Their Photocatalytic Performance towards Hexavalent Chromium Reduction Adsorption of Phytohormones from Waste Coconut Water using Optimally Activated Biochar from Sugarcane Bagasse Preparation of Rice Husk-Derived Activated Biochar for Phytohormone Extraction from Waste Coconut Water via Adsorption
Devianto, Hary	Review and Improvement of Learning Outcomes of Undergraduate Chemical Engineering Program: Curriculum 2024 Case Study Preparing Human Resources to Build Process Safety Competency Leveraging Light and CO2 Emission with Copper and Nickel-Doped TiO2 Photocatalyst for Methanol Production Introduction of Electrochemical Corrosion to Chemical Engineer through Educational Laboratory: Deliverability and Lesson Learned Electricity Generation from Tofu Wastewater and Palm Oil Mill Effluent (POME) using Microbial Fuel Cell Harnessing Light to Degrade Palm Oil Mill Effluent (POME) using WO3/TiO2 Photocatalysts Enhancement of Zinc-Air Battery Performance using Polyvinyl Alcohol and Chitosan as Binders for Porous Zinc Anodes Morphological and Thermal Stability Analysis of Sn/C Electrodes Synthesized through Impregnation and Precipitation Methods for CO2 Electroreduction Simulation and Optimization of Simultaneously Acid Gas and Mercaptans Removal System using Amine-blend Solvents
Dewajani, Heny	Vapor-Liquid Equilibrium Prediction for the Binary System of Acetic Acid/Triacetin using the UNIFAC Model
Dharmastiti, Rini	Optimization Study of Harvest Age and Sun-drying Treatment on the Content of Natural Food Dye and Lutein Isolated from Marigold (Tagetes erecta L.) Flower Waste from Rumah Atsiri Indonesia, Tawangmangu, Indonesia
Dimaano, Maria Natalia	The Effect of Electrolyte Temperature and Variable Charging and Discharging Current Densities in the Performance of a Lab-scale Vanadium Redox Flow Battery
Diono, Wahyu	Pressurized Carbon Dioxide Combined with Ultrasonic Processing for Liposomal Preparation and Encapsulation of Bioactive Compounds Preparation of Microcrystalline Cellulose from Wood Waste Sawdust Employing Hydrothermal Alkaline at Subcritical Water Condition
Djaeni, Mohammad	Improving the Quality of Robusta Kelir Bean: Optimization of Ultrasound-assisted Extraction Process Parameters using Response Surface Methodology
Djenar, Nancy Siti	The Role of Glu/Gly/ZIF-8 Edible Film in Improving the Superior Rheological and Water Vapor Barrier Properties and Antibacterial Activity for Active Food Packaging
Dueñas, R. A.	Photocatalytic Degradation of Petroleum Organic Pollutants (BTX) using Flourine-doped TiO 2 on Activated Carbon Under Visible Irradiation
Dugos, Nathaniel	The Effect of Electrolyte Temperature and Variable Charging and Discharging Current Densities in the Performance of a Lab-scale Vanadium Redox Flow Battery
Dunque, Razzell	Exploring the Potential of Agro-Based Natural Fiber Composites for Eco-Friendly Floor Tile Production
Dwi Laksono, Andromeda	Physical Characteristics of Mesoporous WO3/SiO2 Composite Particle for Enhanced Photocatalytic Degradation of Rhodamine-B and Crystal Violet
Dwi Pratiwi, Vibianti	Simulation of Carbon Capture Technology using Pressure Swing Adsorption from High CO2 Content of Gas Wells in Indonesia
Dwi Ramadani, Putri	Effect of the Addition of Polyethylene Glycol (PEG) on the Mechanical Strength and Biodegradation Rate of Cellulose Acetate Edible Film
Dwi Saputra, Isnandhi	Towards Sustainable Aviation Fuel: Exploring PdMo/Zeolite Catalysts for FAME Hydrodeoxygenation and Technoeconomic Feasibility
E
Ekajati, Joelia	Optimization Study of Harvest Age and Sun-drying Treatment on the Content of Natural Food Dye and Lutein Isolated from Marigold (Tagetes erecta L.) Flower Waste from Rumah Atsiri Indonesia, Tawangmangu, Indonesia
Ekananda, Rizki	Exploratory Data Analysis of FCC Catalyst: A Simulation-Based Study using Aspen HYSYS
Elizabeth, Lidya	Preparation of Ni-Zeolite Catalyst with Varying Calcination Temperature for the Isomerization Process of Glucose to Fructose in Various Solvents
Elma, Muthia	Bio-Oil Conversion From Oil Palm Trunk: Impact of Activated Zeolite Catalyst on Functionalize Properties Surface Characteristics of PVDF Membranes using PEG and Non-PEG
Elmaria, Falah Azizah	Sonication-Assisted Synthesis and Characterization of Magnetic Iron Oxide Nanoparticles
Eriwati, Yosi Kusuma	The Influence of Solvent Mass on the Viscosity and Fluoride Release of Antibacterial Fluoride Varnish
Erlysia, Malla Firma	Bio-Oil Conversion From Oil Palm Trunk: Impact of Activated Zeolite Catalyst on Functionalize Properties
Ernawati, Lusi	Physical Characteristics of Mesoporous WO3/SiO2 Composite Particle for Enhanced Photocatalytic Degradation of Rhodamine-B and Crystal Violet
Estrellado, John Ray	An Analysis of the Photocatalytic Degradation of Pharmaceutical and Personal Care Products Utilizing Different Nano-enabled Photocatalysts
Eviani, Mitra	Morphological and Thermal Stability Analysis of Sn/C Electrodes Synthesized through Impregnation and Precipitation Methods for CO2 Electroreduction
Eviani, Mitra	Preparing Human Resources to Build Process Safety Competency Simulation and Optimization of Simultaneously Acid Gas and Mercaptans Removal System using Amine-blend Solvents
F
Fadhlullah, Muhammad	Thermodynamics, Mass-Energy Balances, and Kinetics Studies of Microalgae Biomass Production System
Fahmi Al Haq, Bahaul	Enhanced Ethylene Conversion to Gasoline-range Liquid Hydrocarbons via PEG-Modified Zeolite Catalysts
Fahmi Al Haq, Bahaul	Clean Fuel Production from Light Alkenes at Atmospheric Pressure over Zeolite Catalyst: Effect of the hierarchy and acidity
Fahrurrozi, Mohammad	Removal of Hydrogen Peroxide Interference on Chemical Oxygen Demand Measurement in Wastewater Treated with Fenton Process Potassium Extraction from Sanidine Ore using Acid Leaching
Fairuza, Faaza Ihda	Potassium Extraction from Sanidine Ore using Acid Leaching
Faizah, Nurul	Optimization of Ultrasonication Time on the Production of ZnO-SiO2 Nanocomposite as Photocatalytic Material Optimization of Ultrasonication Amplitude in the Fabrication of ZnO/g-C3N4 Nanocomposites for Enhanced Photocatalytic Performance
Fajri, Joni Aldilla	Changes in Dissolved Organic Matter during POME Treatment using DBD Plasma System Evaluated by Fluorescence Excitation-emission Matrix Analysis
Fauzani, Isna Dea	Valorization of Oil Palm Trunk (OPT) Waste from Replantation as Feedstock for Black Soldier Fly (BSF) Larvae
Fauzi, Irfan Muhamad	Utilization of Kapok Seed Oil for Producing Reverse Ester as Raw Materials for Polyvinyl Chloride Thermal Stabilizer
Fauziyah, Maratul	Optimization of Ultrasonication Amplitude in the Fabrication of ZnO/g-C3N4 Nanocomposites for Enhanced Photocatalytic Performance
Fauziyen, Sabrina Prima	Harnessing Photocatalytic Technology for Sulfamethoxazole Decomposition using Bismuth Oxide-Bromide Catalysts
Febrianty Sukmana, Ira	Preparing Human Resources to Build Process Safety Competency Simulation and Optimization of Simultaneously Acid Gas and Mercaptans Removal System using Amine-blend Solvents
Febriyanto, Pramahadi	Enhancement of Zinc-Air Battery Performance using Polyvinyl Alcohol and Chitosan as Binders for Porous Zinc Anodes
Ferdinasari, Dina	Separation of 3-Monochloropropane-1,2-diol and Glycidyl Esters from Palm Oil using Zeolite and Coconut Shell Activated Carbon Adsorbents
Fernando, Mika	Process Sequences Optimization of Chitosan Extraction from Black Soldier Fly Cocoon
Fipiana, Wahju Inggar	Insight Mechanisms of Nitrate-Nitrogen Adsorption into Palm Oil Wastewater Sludge-Modified Acticated Carbon
Firdaus, Ayu Paramita	Fabrication of ZnO/TiO2 using Aerosol Method for Photocatalytic Applications
Firdaus, M. Adha	From Waste to Energy: Optimizing Organic-Solid-Refused-Fuel (OSRF) for Sustainable Power Generation.
Firdausa, Muhammad	The Synthesis of Magnetic Activated Carbon from Palm Kernel Shells and Effectiveness Test on the Methylene Blue
Fithri, Anjenny Syfha Nabhila	Effect of Modified Carboxymethylcellulose Nanoparticles Fortification on the Physical and Sensory Characteristic of Taro Noodles
Fujitsuka, Hiroyasu	Preparation of Carbon-supported Metal Catalysts from Ion-exchange Resins for Polymer Electrolyte Fuel Cells Selective Xylitol Production via Catalytic Transfer Hydrogenation over Carbon-supported Copper Catalysts
G
Ghani, Rhafiq Abdul	Surface Characteristics of PVDF Membranes using PEG and Non-PEG
Ghifari, Maulana	The Synthesis of Magnetic Activated Carbon from Palm Kernel Shells and Effectiveness Test on the Methylene Blue
Ghony, Muhammad Abdul	Enhancing Coke Strength through Carbon/Carbon Composite (CC) from Palm Kernel Shell Pyrolysis for Sustainable Ironmaking
Ginting, Rizqy Romadhona	Physical Characteristics of Mesoporous WO3/SiO2 Composite Particle for Enhanced Photocatalytic Degradation of Rhodamine-B and Crystal Violet
Gita Sere, Hasea	Utilization of Zein from Corn Gluten Meal as a Structure-Forming Additive in Fermented Cassava Breads
Glasby, Lawson T.	Exploration of CALF-20’s Structural Flexibility and CO2 Capture Performance in the Presence of Humidity via Experiments and Simulations
Goeminne, Ruben	Exploration of CALF-20’s Structural Flexibility and CO2 Capture Performance in the Presence of Humidity via Experiments and Simulations
Goto, Motonobu	Pressurized Carbon Dioxide Combined with Ultrasonic Processing for Liposomal Preparation and Encapsulation of Bioactive Compounds
Goto, Motonobu	Preparation of Microcrystalline Cellulose from Wood Waste Sawdust Employing Hydrothermal Alkaline at Subcritical Water Condition
Gozan, Misri	Determination of Optimal Operating Conditions for Furfural Production from Xylan using Cyclopentyl Methyl Ether/Deep Eutectic Solvent Optimization of Xylan Conversion into Furfural using DES/Dichlorometana Solution and AlCl3.6H2O Catalyst with a Biphasic System Enhanced Furfural Production from Raw Biomass using Formic Acid as a Solvent and Catalyst: Optimization and Extraction Methods
Graha, Hafis Pratama Rendra	Development of Aromatic Anion Exchange Copolymers using Biphenyl and P-Terphenyl Monomers for Solid Electrolytes in Water Electrolysis Cells Low Loading Copper Based Catalyst with Cerium Oxide Support for Medium-Temperature Water Gas Shift Reaction H2 Production through Water Gas Shift Reaction at Medium Temperature using Cu/MCM-41 Nanocatalysts Synthesis and Characterization of Pd-Ag Membranes via a Modified Electroless Plating Method Study of the Effectiveness and Productivity of MASARO Organic Liquid Fertilizer in Organic Rice Farming Decreasing Heat Loss and Increasing Drying Capacity of LTPM Polydrier Machine
Gunawan, Klara Nathania	Effects of Hydrothermal Pretreatment and Solid-state Fermentation using Trichoderma sp. on Degradation of Lignocellulose and Synthesis of Humic Acid from Corn Cob (Zea mays L.)
Gunawan, Melia Laniwati	Exploring Methods for Remediating Low Quality Oil Palm Olein
Gusnawan, Pri Januar	Sustainable Low Temperature Solar Thermal Energy Collector and Storage
Gutierrez, Bernard Jude	Immobilization of Dredged Material from Tullahan-Tinajeros River System as a Partial Substitute for the Production of Concrete
Gutierrez, Carlito	The Effect of Electrolyte Temperature and Variable Charging and Discharging Current Densities in the Performance of a Lab-scale Vanadium Redox Flow Battery
H
H.Soerawidjajaa, Tatang	Modelling of Coke Deposition on Cracking Catalyst Base on Y Zeolite in n-Butanol Dehydration
Hadiyanto,	Design and Performance Evaluation of a Solar-powered BWRO for Potable Water Supply: A Case Study in a Coastal Community in Jepara, Central Java - Indonesia
Hadlocon, Christan Cyrus	Exploring the Potential of Agro-Based Natural Fiber Composites for Eco-Friendly Floor Tile Production
Hamzah, Fazlena	Stability and Kinetic Study of Immobilized Carbonic anhydrase in PVDF Membrane Chemical Characteristic of the Surface Modification of Eco-Processed Pozzolan (EPP) using Amine Solution
Hanafi, Stephanie	Adsorption Study of Bovine Serum Albumin onto Gallic Acid Modified Fe3O4 Nanoparticles
Handogo, Renanto	Process Simulation and Evaluation of Carbon Separation Technology from Gas Wells in Indonesia using Solvent, Adsorbent, and Membrane Simulation of Carbon Capture Technology using Pressure Swing Adsorption from High CO2 Content of Gas Wells in Indonesia
Handojo, Lienda Aliwarga	Valorization of Oil Palm Trunk (OPT) Waste from Replantation as Feedstock for Black Soldier Fly (BSF) Larvae Kinetic, Thermodynamic, Mass Transfer, and Determination of Controlling Steps in Pectin Extraction from Lemon Peel (Citrus Limon L. Osbeck) Formulation and Production of Feed Pellets using Organic Waste Materials in Bajawa Disctrict, Ngada Regency, East Nusa Tenggara
Hanif, Azizullah	Modeling / Experimental Validation of Ultra Low-Pressure Reverse Osmosis Membrane (ULPRO) System for Backwash in Brackish Water Treatment with Recycling
Hanifah, Aprinanda Nafla Aulia	Biohydrocarbon Synthesis from Fatty Acids through Photocatalytic Hydrogenationdecarboxylation using Titanium Dioxide-Based Catalyst
Hanifah, Fikra	Kinetic Study: The Effect of Reaction Time on Lipolysis of Tengkawang Fat (Illipe Butter) Under Optimal Conditions with Frangipani Resin-Derived Lipase
Hans, Jeneta	Optimization of Gluconic Acid and Xylonic Acid Biosynthesis from Palm Oil Empty Fruit Bunch Hydrolyzate via Fermentation System
Hantoko, Dwi	Direct Synthesis of Dimethyl Ether using Batch Reactor
Hapidin, Dian Ahmad	Synthetic Cellulose Nanofiber (CNF) by Electrospinning for Matrix Immobilized Enzyme
Haq, Ahmad Affandi Ridwan Nurul	Sustainable Water Solutions: The Impact of Modified PVDF Membranes on Atmospheric Water Harvesting
Harimawan, Ardiyan	Electricity Generation from Tofu Wastewater and Palm Oil Mill Effluent (POME) using Microbial Fuel Cell Evaluation of Kinetic Parameters of Various Operating Conditions for Cellulase Enzyme Fermentation
Hariyadi, Asful	Optimizing Fungal Bioleaching for High-yield Recovery of Cobalt and Lithium from Spent Batteries Enhancing Coke Strength through Carbon/Carbon Composite (CC) from Palm Kernel Shell Pyrolysis for Sustainable Ironmaking
Harnawan, Pebrianto	Kinetic Modeling of Oxidation Low-ranked Coal with Hydrogen Peroxide
Hartanto, Danang Tri	Kinetic Modeling of Oxidation Low-ranked Coal with Hydrogen Peroxide
Haryono, Anung	Kinetic Modeling of Oxidation Low-ranked Coal with Hydrogen Peroxide
Hasanah, Nuur	Hydrogen Transfer Approach for Catalytic Hydrothermal Deoxygenation of Triglycerides and Fatty Acids through Glycerol Aqueous Phase Reforming: A Review
Hasegawa, Shigeki	Preparation of Carbon-supported Metal Catalysts from Ion-exchange Resins for Polymer Electrolyte Fuel Cells
Hasibuan, Michael Jaya Sebastian	Thermal Degradation Kinetics of Polyvinyl Chloride Stabilized with Palm Based Mixed Metal Carboxylates
Hazmi, Ariadi	Changes in Dissolved Organic Matter during POME Treatment using DBD Plasma System Evaluated by Fluorescence Excitation-emission Matrix Analysis
Heeres, Hero Jan	Effects of Hydrothermal Pretreatment and Solid-state Fermentation using Trichoderma sp. on Degradation of Lignocellulose and Synthesis of Humic Acid from Corn Cob (Zea mays L.) Comprehensive Kinetic Study on The Acid Catalyzed Conversion of Xylose and Furfural in Water
Helmi, Muhammad	Bio-Oil Conversion From Oil Palm Trunk: Impact of Activated Zeolite Catalyst on Functionalize Properties
Hendra, Hendra	Effect of the Addition of Polyethylene Glycol (PEG) on the Mechanical Strength and Biodegradation Rate of Cellulose Acetate Edible Film
Hermansyah, Heri	Collection and Evaluation of Onshore Process Safety Failures and Process Safety Accident as a Tool for Validating Hazards and Operability Study and as an Information for Process Safety Education Utilization of Dynamic Simulation on Gas Blowby Case as a Validation for the Hazards and Operability Study Result Keep Doing the Same Thing and Expecting Different Results - Evaluation for the Reliability of Hazards and Operability Studies Result: Indonesia Case Examining the Completeness for the Process Hazards Analysis Study Result – Evaluation of Safeguards Identification
Hermansyah, Heri	Optimization of Gluconic Acid and Xylonic Acid Biosynthesis from Palm Oil Empty Fruit Bunch Hydrolyzate via Fermentation System Optimization of Ultrasound-Assisted Extraction (UAE) Method using Natural Deep Eutectic Solvents (NADES) to Increase Yield of Indonesia Curcumin Extract: Experimental and Modelling Utilization of Artificial Intelligent (Customized Pretrained Large Language Model) as a Completeness Evaluation for the Hazards and Operability Study (HAZOP) Result A Bibliometric Analysis and Literature Review for Mapping The State-of- The-Art of Initiating Event Identification Methods
Hermanysah, Heri	The Influence of Solvent Mass on the Viscosity and Fluoride Release of Antibacterial Fluoride Varnish Palm Biomass-based for Glass Cleaner Formulation through Fermentation Process by Gluconobacter Oxydans
Hidayanti, Yuverina	Urea Granule Coated with Flexible Polystyrene by Multi Layers Coating Method as Slow Release Fertilizer
Hidayat, Jefri Pandu	Optimizing Fungal Bioleaching for High-yield Recovery of Cobalt and Lithium from Spent Batteries
Hidayat, Muslikhin	Ultrasonic Extraction and Encapsulation of Omega-3 Extract from Purslane (Portulaca oleraceae) Leaves using a Spray Dryer Integrated CFD and ASPEN Plus Simulation for Optimizing Biomass Combustion: A Study on Sugarcane Bagasse
Hidayat, Taufiq	Saprolitic Ore Reduction using Torrefied Biomass for Ferronickel Production
Hidayatullah, Ibnu Maulana	Optimization of Gluconic Acid and Xylonic Acid Biosynthesis from Palm Oil Empty Fruit Bunch Hydrolyzate via Fermentation System Palm Biomass-based for Glass Cleaner Formulation through Fermentation Process by Gluconobacter Oxydans Optimization of Ultrasound-Assisted Extraction (UAE) Method using Natural Deep Eutectic Solvents (NADES) to Increase Yield of Indonesia Curcumin Extract: Experimental and Modelling
Hirano, Tomoyuki	Optimization of Ultrasonication Amplitude in the Fabrication of ZnO/g-C3N4 Nanocomposites for Enhanced Photocatalytic Performance
Hishammuddin, Nur Aqilah	Effect of Different Binders’ Concentration on The Physicochemical Characteristics of Food Waste Charcoal Briquette
Horie, Takafumi	Enhancement of NO removal by hydrogen peroxide in gas phase in addition to NO oxidation in liquid phase on NOx absorption equipment
Hovington, Pierre	Exploration of CALF-20’s Structural Flexibility and CO2 Capture Performance in the Presence of Humidity via Experiments and Simulations
Hudaya, Farhansyah Yusuf Putra	Study of Hydrothermal Synthesis Condition of Fluid Catalytic Cracking Active Matrix from Metakaolin
Hudaya, Tedi	Pretreatment of Oil Palm Empty Fruit Bunch using Green Organosolvent in Acid and Base Environment
Hudha, Mohammad	Wastewater Treatment of Chemical Engineering Basic Instructional Laboratory at University of Muhammadiyah Purwokerto by Adsorption Method using Chitosan as an Adsorbent
Humada, Tamzil	From Waste to Energy: Optimizing Organic-Solid-Refused-Fuel (OSRF) for Sustainable Power Generation.
Humaidah, Nurlaili	Optimization of Cone Angle and Inlet Pipe Diameter in Spouted Bed Sorghum Grain Dryer using Computational Fluid Dynamics Method
Husain, Syuhani	Stability and Kinetic Study of Immobilized Carbonic anhydrase in PVDF Membrane Chemical Characteristic of the Surface Modification of Eco-Processed Pozzolan (EPP) using Amine Solution
Husnayan, Rezan Jaifar	Effects of Hydrothermal Pretreatment and Solid-state Fermentation using Trichoderma sp. on Degradation of Lignocellulose and Synthesis of Humic Acid from Corn Cob (Zea mays L.)
Hussain, Mohd Azlan	Modelling and Experimental Study for an Interfacial Solar Vapour Generation System for Seawater Purification Modeling / Experimental Validation of Ultra Low-Pressure Reverse Osmosis Membrane (ULPRO) System for Backwash in Brackish Water Treatment with Recycling Experimental Validation of the Water Quality Obtained from a Simple, Inexpensive Portable UF (PUF) System
Huynh, Racheal	Exploration of CALF-20’s Structural Flexibility and CO2 Capture Performance in the Presence of Humidity via Experiments and Simulations
Hwa, Chan Siew	H2 Production through Water Gas Shift Reaction at Medium Temperature using Cu/MCM-41 Nanocatalysts
Hwa, Chan Siew	Low Loading Copper Based Catalyst with Cerium Oxide Support for Medium-Temperature Water Gas Shift Reaction
I
Ichwan, Rizki Nur	Surface Characteristics of PVDF Membranes using PEG and Non-PEG
Ideris, Norhidayah	Suppression of Coffee-ring Effect on PVDF Membrane by Adapting Solute Addition
Idris, Siti Shawalliah	Effect of Different Binders’ Concentration on The Physicochemical Characteristics of Food Waste Charcoal Briquette Enhanced Microwave-assisted Oil Extraction of Enzymatic Pre-treated Agarwood Chip
Ignacio, Jonathan Jared	Deep Decarbonization Pathway of the Cement Industry in ASEAN Machine Learning Models for Predicting Corrosion Inhibition Efficiency on N80 Steel Under HCl and Elevated Temperature Environment
Ikeda, Saaya	Permeability of Temperature-responsive Polymer and Porous Glass Composite Filter
Ilmannafia, Danuraja	Utilization of Epoxidized Palm Oil as a Plasticizer in Synthetic Leather
Iman Sulaeman, Mohamad	Exploratory Data Analysis of FCC Catalyst: A Simulation-Based Study using Aspen HYSYS
Indahwati, Luthfi Auliya	Utilization of Epoxidized Palm Oil as a Plasticizer in Synthetic Leather
Indarto, Antonius	Biodiesel Isomerization using Heterogeneous Super Acid Catalyst for Cold Flow Properties Improvement
Indarto, Antonius	Biomimetic Hydrolysis of Water Hyacinth Cellulose to Glucose
Indrawan, Ria	Chemical Looping Gasification for IGCC
Irawan, Anton	From Waste to Energy: Optimizing Organic-Solid-Refused-Fuel (OSRF) for Sustainable Power Generation.
Ismail, Guntur Adisurya	Review and Improvement of Learning Outcomes of Undergraduate Chemical Engineering Program: Curriculum 2024 Case Study
Istyami, Astri Nur	Biohydrocarbon Synthesis from Fatty Acids through Photocatalytic Hydrogenationdecarboxylation using Titanium Dioxide-Based Catalyst Kinetic Study: The Effect of Reaction Time on Lipolysis of Tengkawang Fat (Illipe Butter) Under Optimal Conditions with Frangipani Resin-Derived Lipase Improving the Production Quality of Palm Kernelamidopropyl Betaine (PKAPB) from Splitted Palm Kernel Fatty Acid (SPKFA)
J
Jastiningsih, Noorliefa Fajran Fahira	Effects of Hydrothermal Pretreatment and Solid-state Fermentation using Trichoderma sp. on Degradation of Lignocellulose and Synthesis of Humic Acid from Corn Cob (Zea mays L.)
Jenie, Siti Nurul Aisyiyah	Sonication-Assisted Synthesis and Characterization of Magnetic Iron Oxide Nanoparticles
Ji, Ying	Elucidation of Heating Mechanism of Microwave-heated Fluidized Bed and its Application to Methane Pyrolysis
Juli Azhari, Noerma	Enhanced Ethylene Conversion to Gasoline-range Liquid Hydrocarbons via PEG-Modified Zeolite Catalysts Clean Fuel Production from Light Alkenes at Atmospheric Pressure over Zeolite Catalyst: Effect of the hierarchy and acidity
Juliastuti, Sri Rachmania	Analysis of Bioelectricity Production and Degradation of Tofu Liquid Waste Utilizing Sidoarjo Mud Inoculum and Bacillus subtilis in a Continuous Series Stacked Microbial Fuel Cell Reactor Analysis of Bioelectricity Production and Degradation of Tofu Liquid Waste Utilizing Sidoarjo Mud Inoculum and Bacillus subtilis in a Continuous Series Stacked Microbial Fuel Cell Reactor
Jumina, Jumina	Molecular Docking and Molecular Dynamics Simulations of Halogenated Xanthone as Novel Anticancer Agents through PDGFR Inhibition Mechanism
Juwari, Juwari	Process Simulation and Evaluation of Carbon Separation Technology from Gas Wells in Indonesia using Solvent, Adsorbent, and Membrane Simulation of Carbon Capture Technology using Pressure Swing Adsorption from High CO2 Content of Gas Wells in Indonesia
Juwari, Juwari	Techno-Economic Analysis of Methanol Production from Low Grade Crude Glycerol in Indonesia
K
K., Kusdianto	Fabrication of ZnO/TiO2 using Aerosol Method for Photocatalytic Applications
Kaavessina, Mujtahid	The Synthesis of Magnetic Activated Carbon from Palm Kernel Shells and Effectiveness Test on the Methylene Blue
Kadja, Grandprix T. M.	Realizing ZnO Adsorbent with Superior Ambient-Temperature Desulfurization Performance from N2-H2S Gas Mixture Enhanced Ethylene Conversion to Gasoline-range Liquid Hydrocarbons via PEG-Modified Zeolite Catalysts Clean Fuel Production from Light Alkenes at Atmospheric Pressure over Zeolite Catalyst: Effect of the hierarchy and acidity Study of Hydrothermal Synthesis Condition of Fluid Catalytic Cracking Active Matrix from Metakaolin
Kadja, Grandprix Thomryes Marth	Pioneering the Development of MXene Nanosheets in Indonesia: Towards High-Efficient Electrocatalyst Hydrogen Evolution Electrocatalyst
Kadri, Atikah	Enhanced Microwave-assisted Oil Extraction of Enzymatic Pre-treated Agarwood Chip
Kageyama, Miho	Quantitative Analysis of Mass Transfer Resistances from the Observed Reaction Order of Polymer Electrolyte Fuel Cells
Kaharian, Andri Kapuji	A Review of Anti-surge Control Systems of Centrifugal Compressors
Kalloka, Sultan Hendra Mahardi	Optimization of Ultrasonication Time on the Production of ZnO-SiO2 Nanocomposite as Photocatalytic Material
Kalong, Munsuree	Application of Carbon Nanotube-activated Carbon Hybrid Film to Electrode in Zn-air Battery
Kambara, Shinji	Enhance the CO2 Conversion at Atmospheric Pressure Plasma: Influence of O2 and CO Separation from the Product Stream
Karisma, Achmad Dwitama	Optimization of Ultrasonication Time on the Production of ZnO-SiO2 Nanocomposite as Photocatalytic Material
Kartohardjono, Sutrasno	Utilization of Dynamic Simulation on Gas Blowby Case as a Validation for the Hazards and Operability Study Result Utilization of Artificial Intelligent (Customized Pretrained Large Language Model) as a Completeness Evaluation for the Hazards and Operability Study (HAZOP) Result
Kartohardjono, Sutrasno	Collection and Evaluation of Onshore Process Safety Failures and Process Safety Accident as a Tool for Validating Hazards and Operability Study and as an Information for Process Safety Education Keep Doing the Same Thing and Expecting Different Results - Evaluation for the Reliability of Hazards and Operability Studies Result: Indonesia Case Examining the Completeness for the Process Hazards Analysis Study Result – Evaluation of Safeguards Identification
Kato, Takahiro	Recovery of Gold and Silver from E-waste
Kawase, Motoaki	Preparation of Carbon-supported Metal Catalysts from Ion-exchange Resins for Polymer Electrolyte Fuel Cells Effects of Proton Concentration in the Reaction of Cellulose with Vanadyl Ions Bismuth-based Perovskite Thin Film Growth Dynamics in Reaction Engineering Point of View Theoretical Study on Reaction of Trimethylaluminum and Ammonia to Synthesize Aluminum Nitride Influences of micropores on mesopore formation in synthesis of mesoporous carbon using nano iron oxide catalysts Electrolyte Effects in Ethanol Electro-reforming in Acidic Electrolytes Selective Xylitol Production via Catalytic Transfer Hydrogenation over Carbon-supported Copper Catalysts Quantitative Analysis of Mass Transfer Resistances from the Observed Reaction Order of Polymer Electrolyte Fuel Cells
Kevin, Kevin	Cellulose Acetate/CNT-based Mixed Matrix Membrane for Methylene Blue Wastewater Treatment
Khairi, Ahmad	Experimental Validation of the Water Quality Obtained from a Simple, Inexpensive Portable UF (PUF) System
Khan, Morzina	Efficient Removal of Microplastic using Devitalized Bog Moss (Sphagnum palustre) Enhanced Filter System
Khayrani, Apriliana Cahya	Palm Biomass-based for Glass Cleaner Formulation through Fermentation Process by Gluconobacter Oxydans
Khoiruddin, Khoiruddin	Sustainable Water Solutions: The Impact of Modified PVDF Membranes on Atmospheric Water Harvesting
Kiatkittipong, Worapon	Enhanced Furfural Production from Raw Biomass using Formic Acid as a Solvent and Catalyst: Optimization and Extraction Methods
Kimura, Shoma	Bismuth-based Perovskite Thin Film Growth Dynamics in Reaction Engineering Point of View
Kimura, Shoya	Influences of micropores on mesopore formation in synthesis of mesoporous carbon using nano iron oxide catalysts
Kodama, Satoshi	Elucidation of Heating Mechanism of Microwave-heated Fluidized Bed and its Application to Methane Pyrolysis Effect of Electric Field on Water Freezing and its Mechanism
Kominami, Katsuyuki	Effect of Fluid Forces on the Oblique Flow in a Vibrated Powder Bed
Kresnowati, Made Tri Ari Penia	Utilization of Zein from Corn Gluten Meal as a Structure-Forming Additive in Fermented Cassava Breads Valorization of Oil Palm Trunk (OPT) Waste from Replantation as Feedstock for Black Soldier Fly (BSF) Larvae
Kristanto, Jonas	Supervised Machine Learning Model for Predicting Lignocellulosic Biomass Pyrolysis Product
Kristianto, Hans	Adsorption Study of Bovine Serum Albumin onto Gallic Acid Modified Fe3O4 Nanoparticles
Kuncoro, Muhammad Ahnaf Suryananda	Supervised Machine Learning Model for Predicting Lignocellulosic Biomass Pyrolysis Product
Kurniawan, Ade	Phase Change Kinetics of Al-Based Micro-Encapsulated Phase Change Materials for Thermal Energy Storage Development
Kurniawan, Teguh	From Waste to Energy: Optimizing Organic-Solid-Refused-Fuel (OSRF) for Sustainable Power Generation.
Kurniawan, Yehezkiel Steven	Molecular Docking and Molecular Dynamics Simulations of Halogenated Xanthone as Novel Anticancer Agents through PDGFR Inhibition Mechanism
Kusdiana, Dadan	Morphological and Thermal Stability Analysis of Sn/C Electrodes Synthesized through Impregnation and Precipitation Methods for CO2 Electroreduction
Kustiana, Dina	The Role of Glu/Gly/ZIF-8 Edible Film in Improving the Superior Rheological and Water Vapor Barrier Properties and Antibacterial Activity for Active Food Packaging
Kusumah, Adriansyah Aria	Utilization of Kapok Seed Oil for Producing Reverse Ester as Raw Materials for Polyvinyl Chloride Thermal Stabilizer
Kusumastuti, Yuni	Kinetic Modeling of Oxidation Low-ranked Coal with Hydrogen Peroxide Influence of Alkenyl Succinic Anhydride (ASA) on Paper Print Quality
Kusworo, Prof. Dr. Tutuk Djoko	Recent Development of Photocatalytic Nanohybrid Membranes for Wastewater Treatment Applications in Supporting SDGs Implementation LIBs recycling process: Thailand 1st plant – From laboratory to industrial practice A Few Fresh Flavours of Fermentation TBA Hydrogen Energy Utilization: Case for Malaysia Waste Plastic Recycling to Fuels and Chemicals Using Catalytic Thermochemical Approaches Best Practice of Safety Principles and Implementation Carbon trading in Indonesia: Accelerating the Decarbonization Journey History of Chemical Engineering and Sustainable Future of Chemical Engineering in the VUCA Era TBA A Sustainable Future with Vanadium REDOX Flow Battery - Energy Storage System in the Philippines Chemical Engineering Curriculum, Teaching Approach, and Assessment: Embedding IChemE and Higher Education Academy (HEA) Perspectives Development of Integrated Bio-Circular Economy from Food and Energy Estate Waste Fraction To Biofuel and Bio-Chemicals TalkShow - Discussion Evolutionary Nanoparticle Resistance in Bacterial Pathogens Research Trends and Challenging Issues in Food Cold Chain since 2000 TBA TBA Bioenergy and Carbon Removal Credit Development for Energy and Food Security in Indonesia A Practical Guide for Operating, Optimizing, and Troubleshooting Separation Equipment in a Refinery: A Case Study on Product Fractionation in the Hydrocracking Plant RU V Balikpapan TBA Rethinking Chemical Engineering Education in Indonesia: Opportunities, Challenges, and Future Directions From Field to Factory: Sustainable Chemistry Solutions from Agricultural Biomass, Fats, and Oils Sustainable Development Towards Food Security
Kuwagi, Kenya	Effect of Fluid Forces on the Oblique Flow in a Vibrated Powder Bed
L
Laivani, Jescelyn	Characterization of Activated Carbon as an Adsorbent for Carbon Dioxide Removal in Biogas Upgrading Application
Lalin, Chachay Thalia	Surface Characteristics of PVDF Membranes using PEG and Non-PEG
Laniwati, Melia	Direct Synthesis of Dimethyl Ether using Batch Reactor Realizing ZnO Adsorbent with Superior Ambient-Temperature Desulfurization Performance from N2-H2S Gas Mixture Enhanced Ethylene Conversion to Gasoline-range Liquid Hydrocarbons via PEG-Modified Zeolite Catalysts Clean Fuel Production from Light Alkenes at Atmospheric Pressure over Zeolite Catalyst: Effect of the hierarchy and acidity Modelling of Coke Deposition on Cracking Catalyst Base on Y Zeolite in n-Butanol Dehydration Study of Hydrothermal Synthesis Condition of Fluid Catalytic Cracking Active Matrix from Metakaolin
Larasati, Clarissa	Pressurized Carbon Dioxide Combined with Ultrasonic Processing for Liposomal Preparation and Encapsulation of Bioactive Compounds
Larisa, Ratna	Utilization of Zein from Corn Gluten Meal as a Structure-Forming Additive in Fermented Cassava Breads
Latimer, James	Design and Performance Evaluation of a Solar-powered BWRO for Potable Water Supply: A Case Study in a Coastal Community in Jepara, Central Java - Indonesia
Latosa, Maria Christine	Immobilization of Dredged Material from Tullahan-Tinajeros River System as a Partial Substitute for the Production of Concrete
Lau, Raymond	Effects of Wastewater Parameters on the Growth and Behavioral Characteristics of Chlorella sp.
Le Monde, Brilliant Umara	Hybrid Ultrasound and Advanced Oxidation Process Regeneration of Spent RFCC Catalysts: Optimization and Catalytic Performance
Lebelaha, Giannini Angelo Eugenius	Enhancing Coke Strength through Carbon/Carbon Composite (CC) from Palm Kernel Shell Pyrolysis for Sustainable Ironmaking
Lengari, Helena Hapa	Process Sequences Optimization of Chitosan Extraction from Black Soldier Fly Cocoon
Lestari, Puji	Analysis of Cellulose, Hemicellulose and Lignin Compsition in West Java and Banten Coconut Fiber: Chesson Method
Li, Yafei	Theoretical Study on Reaction of Trimethylaluminum and Ammonia to Synthesize Aluminum Nitride
Lipit, Marc	Effect of Subcritical Water Temperature in the Pretreatment of Ceiba pentandra Fibers
Liswani, Ayla Annisa	Palm Biomass-based for Glass Cleaner Formulation through Fermentation Process by Gluconobacter Oxydans
Lovian, Irfan Aery	Risk Based Inspection on Erosion Rate Modeling of Transmission Pipeline Material at PT X Siak using Ansys Software
Lovian, Irfan Aery	Pre-Fire Planning Analysis with LOP Strategy Based on Shipping Tank Fire Modeling using WRPLOT and ALOHA (Case Study: Gathering Station X PT X Bumi)
Lugito, Graecia	Sustainable Water Solutions: The Impact of Modified PVDF Membranes on Atmospheric Water Harvesting
Lugito, Graecia	Valorization of Oil Palm Trunk (OPT) Waste from Replantation as Feedstock for Black Soldier Fly (BSF) Larvae
Lukrina, Bellentz	Separation of 3-Monochloropropane-1,2-diol and Glycidyl Esters from Palm Oil using Zeolite and Coconut Shell Activated Carbon Adsorbents
Lusiani, Cucuk Evi	Vapor-Liquid Equilibrium Prediction for the Binary System of Acetic Acid/Triacetin using the UNIFAC Model
M
Machmudah, Siti	Pressurized Carbon Dioxide Combined with Ultrasonic Processing for Liposomal Preparation and Encapsulation of Bioactive Compounds Preparation of Microcrystalline Cellulose from Wood Waste Sawdust Employing Hydrothermal Alkaline at Subcritical Water Condition
Madani, Zikri Daffa Aulia	Bio-Oil Conversion From Oil Palm Trunk: Impact of Activated Zeolite Catalyst on Functionalize Properties
Madhania, Suci	Fabrication of ZnO/TiO2 using Aerosol Method for Photocatalytic Applications
Madrazo, Cynthia	Effect of Subcritical Water Temperature in the Pretreatment of Ceiba pentandra Fibers
Magaji, Buhari	Nanocomposite Materials as Potential Agents for Decontamination and Disinfection of Contaminated Water
Mailita, Valentina	Calcium Reduction in Dissolving Pulp through Optimization of the First Stage of the Bleaching Process
Makertihartha, I Gusti B.N.	Biodiesel Isomerization using Heterogeneous Super Acid Catalyst for Cold Flow Properties Improvement Enhanced Ethylene Conversion to Gasoline-range Liquid Hydrocarbons via PEG-Modified Zeolite Catalysts Clean Fuel Production from Light Alkenes at Atmospheric Pressure over Zeolite Catalyst: Effect of the hierarchy and acidity Modelling of Coke Deposition on Cracking Catalyst Base on Y Zeolite in n-Butanol Dehydration Towards Sustainable Aviation Fuel: Exploring PdMo/Zeolite Catalysts for FAME Hydrodeoxygenation and Technoeconomic Feasibility Study of Hydrothermal Synthesis Condition of Fluid Catalytic Cracking Active Matrix from Metakaolin Hydrogen Transfer Approach for Catalytic Hydrothermal Deoxygenation of Triglycerides and Fatty Acids through Glycerol Aqueous Phase Reforming: A Review
Makertihartha, Igbn	Improving Feed Definition for Deasphalting Simulation: Towards a Validated and Accurate Model Process Systems Engineering Framework for Biofuel Production using Aspen Plus: A Comprehensive Review
Malongo, Johann Heinrich	Evaluation of Corrosion and Scaling Propensity in Swimming Pool Water through Langelier Saturation Index (LSI) of Selected Swimming Pools in Negros Oriental, Philippines Exploring the Potential of Agro-Based Natural Fiber Composites for Eco-Friendly Floor Tile Production
Manalo, Ma Cristina Joyce	The Effect of Electrolyte Temperature and Variable Charging and Discharging Current Densities in the Performance of a Lab-scale Vanadium Redox Flow Battery
Martana, Guileria Divina Gracia	Pretreatment of Oil Palm Empty Fruit Bunch using Green Organosolvent in Acid and Base Environment
Maska, Andreas	Enhancing Coke Strength through Carbon/Carbon Composite (CC) from Palm Kernel Shell Pyrolysis for Sustainable Ironmaking
Masoumifard, Nima	Exploration of CALF-20’s Structural Flexibility and CO2 Capture Performance in the Presence of Humidity via Experiments and Simulations
Matsumoto, Koken	Permeability of Temperature-responsive Polymer and Porous Glass Composite Filter
Matsuo, Seiji	Analysis of Important Factors in an Off-line Heat Transport System from Industrial Waste Heat for a Sustainable Society using Sensitivity Analysis
Meisandro, Yochanan	Pre-Fire Planning Analysis with LOP Strategy Based on Shipping Tank Fire Modeling using WRPLOT and ALOHA (Case Study: Gathering Station X PT X Bumi)
Mhd Yazid, Nur Yazlina	Suppression of Coffee-ring Effect on PVDF Membrane by Adapting Solute Addition
Migo, Veronica	Parametric and Optimization Study on the Chemical Activation of Durian Shell-derived Biochar for Phytohormone Extraction from Waste Coconut Water Adsorption of Phytohormones from Waste Coconut Water using Optimally Activated Biochar from Sugarcane Bagasse Preparation of Rice Husk-Derived Activated Biochar for Phytohormone Extraction from Waste Coconut Water via Adsorption
Miladatussholihah, Nur	Optimization Study of Harvest Age and Sun-drying Treatment on the Content of Natural Food Dye and Lutein Isolated from Marigold (Tagetes erecta L.) Flower Waste from Rumah Atsiri Indonesia, Tawangmangu, Indonesia
Mimura, Kengo	Phase Change Kinetics of Al-Based Micro-Encapsulated Phase Change Materials for Thermal Energy Storage Development
Mindaryani, Aswati	Optimization of CERIOPS TAGAL Sawdust Extraction for Natural Dye
Miryanti, Arry	Process Sequences Optimization of Chitosan Extraction from Black Soldier Fly Cocoon
Miyamoto, Manabu	H2 Production through Water Gas Shift Reaction at Medium Temperature using Cu/MCM-41 Nanocatalysts Synthesis and Characterization of Pd-Ag Membranes via a Modified Electroless Plating Method
Mizukami, Kosuke	Effects of Proton Concentration in the Reaction of Cellulose with Vanadyl Ions
Mizukami, Yuto	Efficient and accurate analysis of the shear stress on an iPS cell in a stirring culture by using PINNs
Moghadam, Peyman Z.	Exploration of CALF-20’s Structural Flexibility and CO2 Capture Performance in the Presence of Humidity via Experiments and Simulations
Mohamad Zainol, Muzakkir	Hybrid Ultrasound and Advanced Oxidation Process Regeneration of Spent RFCC Catalysts: Optimization and Catalytic Performance
Mohd Junaidi, Mohd Usman	Modelling and Experimental Study for an Interfacial Solar Vapour Generation System for Seawater Purification Modeling / Experimental Validation of Ultra Low-Pressure Reverse Osmosis Membrane (ULPRO) System for Backwash in Brackish Water Treatment with Recycling
Mohidem, Nur Atikah	Stability and Kinetic Study of Immobilized Carbonic anhydrase in PVDF Membrane Chemical Characteristic of the Surface Modification of Eco-Processed Pozzolan (EPP) using Amine Solution
Muadz,	Determination of Optimal Operating Conditions for Furfural Production from Xylan using Cyclopentyl Methyl Ether/Deep Eutectic Solvent Optimization of Xylan Conversion into Furfural using DES/Dichlorometana Solution and AlCl3.6H2O Catalyst with a Biphasic System
Mubarok, Ferry Y.	Soil Washing using Green Surfactants for Remediation of Oil-contaminated Soil
Muhammad, Fadel	Chemical Looping Gasification for IGCC
Muhammad Yuan, Dzaky	Preparing Human Resources to Build Process Safety Competency
Muhd Rodhi, Miradatul Najwa	Stability and Kinetic Study of Immobilized Carbonic anhydrase in PVDF Membrane Chemical Characteristic of the Surface Modification of Eco-Processed Pozzolan (EPP) using Amine Solution
Mukharror, Darmawan Ahmad	Collection and Evaluation of Onshore Process Safety Failures and Process Safety Accident as a Tool for Validating Hazards and Operability Study and as an Information for Process Safety Education Utilization of Dynamic Simulation on Gas Blowby Case as a Validation for the Hazards and Operability Study Result Keep Doing the Same Thing and Expecting Different Results - Evaluation for the Reliability of Hazards and Operability Studies Result: Indonesia Case Examining the Completeness for the Process Hazards Analysis Study Result – Evaluation of Safeguards Identification Utilization of Artificial Intelligent (Customized Pretrained Large Language Model) as a Completeness Evaluation for the Hazards and Operability Study (HAZOP) Result
Mukti, Farhan Aji	Fabrication of ZnO/TiO2 using Aerosol Method for Photocatalytic Applications
Mulyana, Andrew Nathanel	Sustainable Water Solutions: The Impact of Modified PVDF Membranes on Atmospheric Water Harvesting
Mulyono, Panut	Potassium Extraction from Sanidine Ore using Acid Leaching Life Cycle Assessment of Kraft Pulp Production through Compact Cooking and Lo-Solids Technology
Munir, Muhammad Miftahul	Analysis of Cellulose, Hemicellulose and Lignin Compsition in West Java and Banten Coconut Fiber: Chesson Method
Muntaqin, Althafa	Realizing ZnO Adsorbent with Superior Ambient-Temperature Desulfurization Performance from N2-H2S Gas Mixture
Murakami, Kenji	Permeability of Temperature-responsive Polymer and Porous Glass Composite Filter
Murakami, Shuka	Preparation of Carbon-supported Metal Catalysts from Ion-exchange Resins for Polymer Electrolyte Fuel Cells Selective Xylitol Production via Catalytic Transfer Hydrogenation over Carbon-supported Copper Catalysts
Murtianta, Venansius Ardhian Liguna	Cellulose Acetate/CNT-based Mixed Matrix Membrane for Methylene Blue Wastewater Treatment
Muryanto,	Determination of Optimal Operating Conditions for Furfural Production from Xylan using Cyclopentyl Methyl Ether/Deep Eutectic Solvent Optimization of Xylan Conversion into Furfural using DES/Dichlorometana Solution and AlCl3.6H2O Catalyst with a Biphasic System
Mustafa, Mustafa	Simulation and Optimization of Simultaneously Acid Gas and Mercaptans Removal System using Amine-blend Solvents
Mustain, Asalil	Vapor-Liquid Equilibrium Prediction for the Binary System of Acetic Acid/Triacetin using the UNIFAC Model
Musyarofah, Musyarofah	Physical Characteristics of Mesoporous WO3/SiO2 Composite Particle for Enhanced Photocatalytic Degradation of Rhodamine-B and Crystal Violet
Mutawamah, Fathiyatul	Preparation of Ni-Zeolite Catalyst with Varying Calcination Temperature for the Isomerization Process of Glucose to Fructose in Various Solvents
Mutiara, Siska	Leveraging Light and CO2 Emission with Copper and Nickel-Doped TiO2 Photocatalyst for Methanol Production
N
Nabilah, Azizah	Modelling of Coke Deposition on Cracking Catalyst Base on Y Zeolite in n-Butanol Dehydration
Nafisa, Adhelya Zahra	Improving the Production Quality of Palm Kernelamidopropyl Betaine (PKAPB) from Splitted Palm Kernel Fatty Acid (SPKFA)
Nainggolan, Stevanus Newman	Thermal Degradation Kinetics of Polyvinyl Chloride Stabilized with Palm Based Mixed Metal Carboxylates
Naito, Kohei	Effect of Electric Field on Water Freezing and its Mechanism
Nakagawa, Hiroyuki	Preparation of Carbon-supported Metal Catalysts from Ion-exchange Resins for Polymer Electrolyte Fuel Cells
Nakahara, Yukiko	Preparation of Fluorescent Silica Nanoparticles and Evaluation of Particle Size and Fluorescence Intensity
Nakamura, Ayano	Permeability of Temperature-responsive Polymer and Porous Glass Composite Filter
Nakamura, Tomokazu	Phase Change Kinetics of Al-Based Micro-Encapsulated Phase Change Materials for Thermal Energy Storage Development
Naldi, Nofri	Changes in Dissolved Organic Matter during POME Treatment using DBD Plasma System Evaluated by Fluorescence Excitation-emission Matrix Analysis
Namhaed, Kritsana	Enhanced Furfural Production from Raw Biomass using Formic Acid as a Solvent and Catalyst: Optimization and Extraction Methods
Nashirudin, Nur Aziz	Techno-economic Study of Hydrogen Production Methods
Nasihuddin, Al Athea Firmano	Supervised Machine Learning Model for Predicting Lignocellulosic Biomass Pyrolysis Product
Nastiti, Maria Graciapalma	The Influence of Solvent Mass on the Viscosity and Fluoride Release of Antibacterial Fluoride Varnish
Nasution, Muhammad Islam	Risk Based Inspection on Erosion Rate Modeling of Transmission Pipeline Material at PT X Siak using Ansys Software Pre-Fire Planning Analysis with LOP Strategy Based on Shipping Tank Fire Modeling using WRPLOT and ALOHA (Case Study: Gathering Station X PT X Bumi)
Nasution, Nicky Leonard	Redesigning Thermal Oxidizers Systems: A Case Study on Horizontal Integration of Waste Heat Recovery for Enhanced Maintenance Access and Operational Efficiency
Naval, Charyze Arriane	Machine Learning Models for Predicting Corrosion Inhibition Efficiency on N80 Steel Under HCl and Elevated Temperature Environment
Ng, Denny	Deep Decarbonization Pathway of the Cement Industry in ASEAN
Ningrum, Eva Oktavia	Optimization of Ultrasonication Amplitude in the Fabrication of ZnO/g-C3N4 Nanocomposites for Enhanced Photocatalytic Performance
Nomura, Takahiro	Phase Change Kinetics of Al-Based Micro-Encapsulated Phase Change Materials for Thermal Energy Storage Development
Nopizar, Ahmad Soleh	From Waste to Energy: Optimizing Organic-Solid-Refused-Fuel (OSRF) for Sustainable Power Generation.
Novia Andhin, Tyara	Process Simulation and Evaluation of Carbon Separation Technology from Gas Wells in Indonesia using Solvent, Adsorbent, and Membrane
Noywuli, Nicolaus	Formulation and Production of Feed Pellets using Organic Waste Materials in Bajawa Disctrict, Ngada Regency, East Nusa Tenggara
Nugraha, Maulana Gilar	Integrated CFD and ASPEN Plus Simulation for Optimizing Biomass Combustion: A Study on Sugarcane Bagasse
Nugraha, Maulana Gilar	Pre-Hydrolysis Kraft Pulp Reactivity Enhancement through Deep Eutectic Solvent for a Sustainable Viscose Production
Nugroho, Arun Dwi	Surface Characteristics of PVDF Membranes using PEG and Non-PEG
Nugroho, Rio	Biogas Conversion via Liquid Phase Oxidation: An Investigation into Methane and Carbon Dioxide Utilization for Formic Acid Production
Nur, Abdillah Irsyad El	Techno-Economic Analysis of Co-firing Sawdust Biomass for Indramayu Power Plant
Nur'Aini, Aprilianti	Synthesis of Ternary Nanocomposites of MnO2/PANI/Maxsorb and Their Performance as an Electrode Material for Supercapacitors
Nurdin, Isdiriayani	Introduction of Electrochemical Corrosion to Chemical Engineer through Educational Laboratory: Deliverability and Lesson Learned
Nurdini, Nadya	Realizing ZnO Adsorbent with Superior Ambient-Temperature Desulfurization Performance from N2-H2S Gas Mixture
Nurgirisia, Novesa	Primary Environmental Impacts Assessment on a Dual-Fuel Power Plant using Producer Gas and Diesel Fuel Mixture
Nurhadianty, Vivi	Kinetic, Thermodynamic, Mass Transfer, and Determination of Controlling Steps in Pectin Extraction from Lemon Peel (Citrus Limon L. Osbeck)
Nurhawa, Shalli	Study of Cereal Flakes Formulation from Sorghum (Sorghum bicolor (L.) Moench) and Mung Bean (Vigna radiata (L.)) with Supporting Ingredient using Response Surface Methodology (RSM) Study of Cereal Flakes Formulation from Sorghum (Sorghum bicolor (L.) Moench) and Mung Bean (Vigna radiata (L.)) with Supporting Ingredient using Design Expert Mixture D-Optimal Method
Nurhidayati, Dewi	Utilization of Epoxidized Palm Oil as a Plasticizer in Synthetic Leather
Nurillah, Diyanah Tabriza	Techno-Economic Analysis of Methanol Production from Low Grade Crude Glycerol in Indonesia
Nuryoto, Nuryoto	Effect of Chitosan Addition on The Mechanical Properties and Antibacterial Activity of Polylactic Acid (PLA)/Cellulose Acetate (CA) Based Film Composites Effect of the Addition of Polyethylene Glycol (PEG) on the Mechanical Strength and Biodegradation Rate of Cellulose Acetate Edible Film
O
Ocampo, Queenie Alayson	Evaluation of Corrosion and Scaling Propensity in Swimming Pool Water through Langelier Saturation Index (LSI) of Selected Swimming Pools in Negros Oriental, Philippines
Oe, Shima	Selective Xylitol Production via Catalytic Transfer Hydrogenation over Carbon-supported Copper Catalysts
Ogawa, Hikaru	Quantitative Analysis of Mass Transfer Resistances from the Observed Reaction Order of Polymer Electrolyte Fuel Cells
Oginawati, Katharina	Analysis of Cellulose, Hemicellulose and Lignin Compsition in West Java and Banten Coconut Fiber: Chesson Method
Okano, Yasunori	Efficient and accurate analysis of the shear stress on an iPS cell in a stirring culture by using PINNs
Okawa, Hirokazu	Recovery of Gold and Silver from E-waste
Okita, Erika	Enhancement of NO removal by hydrogen peroxide in gas phase in addition to NO oxidation in liquid phase on NOx absorption equipment
Oktanindya, Edtillya Rizca	Pressurized Carbon Dioxide Combined with Ultrasonic Processing for Liposomal Preparation and Encapsulation of Bioactive Compounds
Oktavian, Rama	Exploration of CALF-20’s Structural Flexibility and CO2 Capture Performance in the Presence of Humidity via Experiments and Simulations
Olay, Jerry	Efficient Removal of Microplastic using Devitalized Bog Moss (Sphagnum palustre) Enhanced Filter System Removal of Microplastics using Integrated Magnetic Fe3O4 Nanoparticles Extraction and Layered Filtration Process
Omura, Kouichi	Effect of Electric Field on Water Freezing and its Mechanism
Ortenero, Joseph	Effect of Chloride and Bromide Ion Concentration on the Catalytic Activity of Electrodeposited Nickel Zinc Selenide Towards Oxygen Evolution Reaction
P
Pandega, Hafiz	Effect of Modified Carboxymethylcellulose Nanoparticles Fortification on the Physical and Sensory Characteristic of Taro Noodles
Pangayao, Denvert	Immobilization of Dredged Material from Tullahan-Tinajeros River System as a Partial Substitute for the Production of Concrete
Panggabean, Lidya Adhella Desiana	Comprehensive Kinetic Study on The Acid Catalyzed Conversion of Xylose and Furfural in Water
Panjaitan, Wilda	Synthetic Cellulose Nanofiber (CNF) by Electrospinning for Matrix Immobilized Enzyme Immobilization of Recombinant Lipase onto Nickel Foam
Paras, Paul Kenneth	Exploring the Potential of Agro-Based Natural Fiber Composites for Eco-Friendly Floor Tile Production
Parañaque, Julienne Eris	Parametric and Optimization Study on the Chemical Activation of Durian Shell-derived Biochar for Phytohormone Extraction from Waste Coconut Water
Parderio, Pratama Tegar	Conceptual Study of CO2 Injection in Geological Storage to Support Carbon Capture and Storage (CCS) Program in Indonesia
Parsaulian, Andreas Sahat	Maximizing Energy Recovery from Pulp and Paper Mill Sludge using Hydrothermal Carbonization Bio-energy generation from Pulp and Paper Mill Sludge Using Pyrolysis
Perdana, Indra	Calcium Reduction in Dissolving Pulp through Optimization of the First Stage of the Bleaching Process
Permana, Agus Dana	Valorization of Oil Palm Trunk (OPT) Waste from Replantation as Feedstock for Black Soldier Fly (BSF) Larvae
Permanasari, Ayu Ratna	Preparation of Ni-Zeolite Catalyst with Varying Calcination Temperature for the Isomerization Process of Glucose to Fructose in Various Solvents
Petrus, Himawan Tri Murti Bayu	Kinetic Modeling of Oxidation Low-ranked Coal with Hydrogen Peroxide Sonication-Assisted Synthesis and Characterization of Magnetic Iron Oxide Nanoparticles Potassium Extraction from Sanidine Ore using Acid Leaching
Pradana, Yano Surya	Biodiesel Isomerization using Heterogeneous Super Acid Catalyst for Cold Flow Properties Improvement
Prakoso, Tirto	Biohydrocarbon Synthesis from Fatty Acids through Photocatalytic Hydrogenationdecarboxylation using Titanium Dioxide-Based Catalyst
Prakoso, Tirto	Development of Flavonoids and Biodiesel Production Techniques from Malapari (Pongamia pinnata) Seed Oil The Effect of Sodium Glyceroxide Catalyst Concentration on Biodiesel Production Kinetic Study: The Effect of Reaction Time on Lipolysis of Tengkawang Fat (Illipe Butter) Under Optimal Conditions with Frangipani Resin-Derived Lipase Biodiesel Isomerization using Heterogeneous Super Acid Catalyst for Cold Flow Properties Improvement Enhancement of Zinc-Air Battery Performance using Polyvinyl Alcohol and Chitosan as Binders for Porous Zinc Anodes Morphological and Thermal Stability Analysis of Sn/C Electrodes Synthesized through Impregnation and Precipitation Methods for CO2 Electroreduction Hydrogen Transfer Approach for Catalytic Hydrothermal Deoxygenation of Triglycerides and Fatty Acids through Glycerol Aqueous Phase Reforming: A Review
Pramoryza, Michellia	Analysis of Bioelectricity Production and Degradation of Tofu Liquid Waste Utilizing Sidoarjo Mud Inoculum and Bacillus subtilis in a Continuous Series Stacked Microbial Fuel Cell Reactor
Pramoryza, Michellia	Analysis of Bioelectricity Production and Degradation of Tofu Liquid Waste Utilizing Sidoarjo Mud Inoculum and Bacillus subtilis in a Continuous Series Stacked Microbial Fuel Cell Reactor
Pramudita, Daniel	Caustic remediation of oil palm olein free fatty acid in production of nutritious red palm oil (revised) Valorization of Oil Palm Trunk (OPT) Waste from Replantation as Feedstock for Black Soldier Fly (BSF) Larvae Exploring Methods for Remediating Low Quality Oil Palm Olein
Pranolo, Sunu Herwi	Primary Environmental Impacts Assessment on a Dual-Fuel Power Plant using Producer Gas and Diesel Fuel Mixture The Synthesis of Magnetic Activated Carbon from Palm Kernel Shells and Effectiveness Test on the Methylene Blue
Prasetya, Agus	Kinetic Modeling of Oxidation Low-ranked Coal with Hydrogen Peroxide
Prasetyo, Imam	Synthesis of Ternary Nanocomposites of MnO2/PANI/Maxsorb and Their Performance as an Electrode Material for Supercapacitors
Prasetyo, Susiana	Adsorption Study of Bovine Serum Albumin onto Gallic Acid Modified Fe3O4 Nanoparticles
Pratama, Burhanuddin Yusuf	Primary Environmental Impacts Assessment on a Dual-Fuel Power Plant using Producer Gas and Diesel Fuel Mixture
Pratama, Hanung Wisnu	From Waste to Energy: Optimizing Organic-Solid-Refused-Fuel (OSRF) for Sustainable Power Generation.
Pratiwi, Meiti	Hydrothermal Treatment for Reducing Potassium Content in Solid Fuels Derived from Oil Palm Frond
Pratiwi, Meiti	Improving the Production Quality of Palm Kernelamidopropyl Betaine (PKAPB) from Splitted Palm Kernel Fatty Acid (SPKFA) Hydrogen Transfer Approach for Catalytic Hydrothermal Deoxygenation of Triglycerides and Fatty Acids through Glycerol Aqueous Phase Reforming: A Review
Pratiwi, Meiti	Development of Flavonoids and Biodiesel Production Techniques from Malapari (Pongamia pinnata) Seed Oil The Effect of Sodium Glyceroxide Catalyst Concentration on Biodiesel Production Microsoft Excel in Chemical Engineering Education A Tool in Predicting Gasification Products Kinetic Study: The Effect of Reaction Time on Lipolysis of Tengkawang Fat (Illipe Butter) Under Optimal Conditions with Frangipani Resin-Derived Lipase
Prihandini, Ghusrina	Synthetic Cellulose Nanofiber (CNF) by Electrospinning for Matrix Immobilized Enzyme Immobilization of Recombinant Lipase onto Nickel Foam
Priharto, Neil	Evaluation of Kinetic Parameters of Various Operating Conditions for Cellulase Enzyme Fermentation
Prihutami, Pramesti	Kinetic Modeling of Oxidation Low-ranked Coal with Hydrogen Peroxide
Priyatna, Aufa Irsyad	Effect of Modified Carboxymethylcellulose Nanoparticles Fortification on the Physical and Sensory Characteristic of Taro Noodles
Pudjiastuti, Lily	Optimization of Cone Angle and Inlet Pipe Diameter in Spouted Bed Sorghum Grain Dryer using Computational Fluid Dynamics Method
Puji Susilowati, Puji Susilowati	Effect of Soap Percentage on the Characteristic of Biogrease SulfoOle Composed with Combined Soap Calcium Oleate Complex and Calcium Sulfonate Overbased
Purba, Ibnu	The Synthesis of Magnetic Activated Carbon from Palm Kernel Shells and Effectiveness Test on the Methylene Blue
Purba, Julwan Hendry	A Bibliometric Analysis and Literature Review for Mapping The State-of- The-Art of Initiating Event Identification Methods
Puri, Nurdiana Ratna	Fabrication of ZnO/TiO2 using Aerosol Method for Photocatalytic Applications
Purnomo, Chandra Wahyu	Maximizing Energy Recovery from Pulp and Paper Mill Sludge using Hydrothermal Carbonization Bio-energy generation from Pulp and Paper Mill Sludge Using Pyrolysis
Purwadi, Ronny	Caustic remediation of oil palm olein free fatty acid in production of nutritious red palm oil (revised)
Purwadi, Ronny	Biogas Conversion via Liquid Phase Oxidation: An Investigation into Methane and Carbon Dioxide Utilization for Formic Acid Production
Purwaningsih, Dian Yanuarita	Optimization of Cone Angle and Inlet Pipe Diameter in Spouted Bed Sorghum Grain Dryer using Computational Fluid Dynamics Method
Purwono, Suryo	Supervised Machine Learning Model for Predicting Lignocellulosic Biomass Pyrolysis Product
Puspawiningtiyas, Endar	The Effect of Ca/Mg/Zn/Cr Ratio on the Caracteristic of Layer Double Hydroxide with Copresipitation Method
Puspitadewi, Varin Ceysa	Utilizing Low-Quality Lignite Coal for Syngas Production via CO2 Gasification
Putra, Muhammad Fadila	Hybrid Ultrasound and Advanced Oxidation Process Regeneration of Spent RFCC Catalysts: Optimization and Catalytic Performance
Putra, Nicky Rahmana	Optimization of Ultrasonication Time on the Production of ZnO-SiO2 Nanocomposite as Photocatalytic Material
Putra, Zulfan Adi	Collection and Evaluation of Onshore Process Safety Failures and Process Safety Accident as a Tool for Validating Hazards and Operability Study and as an Information for Process Safety Education Utilization of Dynamic Simulation on Gas Blowby Case as a Validation for the Hazards and Operability Study Result Keep Doing the Same Thing and Expecting Different Results - Evaluation for the Reliability of Hazards and Operability Studies Result: Indonesia Case Utilization of Artificial Intelligent (Customized Pretrained Large Language Model) as a Completeness Evaluation for the Hazards and Operability Study (HAZOP) Result
Putrawan, I Dewa Gede Arsa	Utilization of Kapok Seed Oil for Producing Reverse Ester as Raw Materials for Polyvinyl Chloride Thermal Stabilizer Thermal Degradation Kinetics of Polyvinyl Chloride Stabilized with Palm Based Mixed Metal Carboxylates
Putri, Revy A.	Preparation of Ni-Zeolite Catalyst with Varying Calcination Temperature for the Isomerization Process of Glucose to Fructose in Various Solvents
Putri, Salwa Alfa Ni'Am	Production of Biodiesel from Cooking Oil using Immobilized Lipase Itb1.1
Putri, Valery Prilia	Optimization of CERIOPS TAGAL Sawdust Extraction for Natural Dye
Putri Barronette, Damalia	Preparing Human Resources to Build Process Safety Competency
Q
Qomariyah, Lailatul	Optimization of Ultrasonication Time on the Production of ZnO-SiO2 Nanocomposite as Photocatalytic Material Optimization of Ultrasonication Amplitude in the Fabrication of ZnO/g-C3N4 Nanocomposites for Enhanced Photocatalytic Performance
Quinones, Geraldine	Evaluation of Corrosion and Scaling Propensity in Swimming Pool Water through Langelier Saturation Index (LSI) of Selected Swimming Pools in Negros Oriental, Philippines
R
Rabbani, Sulthan	Optimization of Ultrasonication Time on the Production of ZnO-SiO2 Nanocomposite as Photocatalytic Material
Rahayu, Suprihastuti Sri	Kinetic Modeling of Oxidation Low-ranked Coal with Hydrogen Peroxide
Rahayuningsih, Edia	Optimization Study of Harvest Age and Sun-drying Treatment on the Content of Natural Food Dye and Lutein Isolated from Marigold (Tagetes erecta L.) Flower Waste from Rumah Atsiri Indonesia, Tawangmangu, Indonesia
Rahma, Aulia	Bio-Oil Conversion From Oil Palm Trunk: Impact of Activated Zeolite Catalyst on Functionalize Properties Surface Characteristics of PVDF Membranes using PEG and Non-PEG
Rahma, Dina Nur	The Role of Glu/Gly/ZIF-8 Edible Film in Improving the Superior Rheological and Water Vapor Barrier Properties and Antibacterial Activity for Active Food Packaging
Rahma Fitri, Hera	Preparing Human Resources to Build Process Safety Competency Simulation and Optimization of Simultaneously Acid Gas and Mercaptans Removal System using Amine-blend Solvents
Rahman, Muhammad Miftahur	Changes in Dissolved Organic Matter during POME Treatment using DBD Plasma System Evaluated by Fluorescence Excitation-emission Matrix Analysis Enhance the CO2 Conversion at Atmospheric Pressure Plasma: Influence of O2 and CO Separation from the Product Stream
Rahmanto, Budi	Scaling up of Enhanced Lubricant Production with Extreme Pressure Additive Formulations from Laboratory Scale to Industrial Scale
Rahmayetty, Rahmayetty	Effect of Chitosan Addition on The Mechanical Properties and Antibacterial Activity of Polylactic Acid (PLA)/Cellulose Acetate (CA) Based Film Composites From Waste to Energy: Optimizing Organic-Solid-Refused-Fuel (OSRF) for Sustainable Power Generation. Effect of the Addition of Polyethylene Glycol (PEG) on the Mechanical Strength and Biodegradation Rate of Cellulose Acetate Edible Film
Rahmi, Puti Latifa	The Effect of Sodium Glyceroxide Catalyst Concentration on Biodiesel Production
Rahmiati, Nurul Muthia	Pretreatment of Oil Palm Empty Fruit Bunch using Green Organosolvent in Acid and Base Environment
Rajakal, Jaya Prasanth	Deep Decarbonization Pathway of the Cement Industry in ASEAN
Raksajati, Anggit	Process Systems Engineering Framework for Biofuel Production using Aspen Plus: A Comprehensive Review Characterization of Activated Carbon as an Adsorbent for Carbon Dioxide Removal in Biogas Upgrading Application Techno-Economic Evaluation of Low Carbon Ammonia Co-firing in Existing Coal Fired Power Plant
Raksajati, Anggit	Improving Feed Definition for Deasphalting Simulation: Towards a Validated and Accurate Model
Ramadhan, Azam Zaky Azen	Effect of the Addition of Polyethylene Glycol (PEG) on the Mechanical Strength and Biodegradation Rate of Cellulose Acetate Edible Film
Ramadhana, Rucita	Vapor-Liquid Equilibrium Prediction for the Binary System of Acetic Acid/Triacetin using the UNIFAC Model
Ramadhani, Syahrizal	Utilization of Sugarcane Waste Filter Cake (Blotong) as Alternative Energy Fuel
Ramirez-Peñafiel, Felicidad Christina	The Effect of Electrolyte Temperature and Variable Charging and Discharging Current Densities in the Performance of a Lab-scale Vanadium Redox Flow Battery
Ramos, Evette Marie Claire P.	Production of Biodiesel from Single-use Mixed Plastic Wastes through Pyrolysis and Subcritical Transesterification
Ranggadewa, Hyasintus Satrya	Optimization of Cone Angle and Inlet Pipe Diameter in Spouted Bed Sorghum Grain Dryer using Computational Fluid Dynamics Method
Rasrendra, Carolus Borromeus	Caustic remediation of oil palm olein free fatty acid in production of nutritious red palm oil (revised) The Effect of Ca/Mg/Zn/Cr Ratio on the Caracteristic of Layer Double Hydroxide with Copresipitation Method Realizing ZnO Adsorbent with Superior Ambient-Temperature Desulfurization Performance from N2-H2S Gas Mixture Exploring Methods for Remediating Low Quality Oil Palm Olein Comprehensive Kinetic Study on The Acid Catalyzed Conversion of Xylose and Furfural in Water Towards Sustainable Aviation Fuel: Exploring PdMo/Zeolite Catalysts for FAME Hydrodeoxygenation and Technoeconomic Feasibility
Rasrendra, Carolus Borromeus	Hydrolytic Extraction and Biomimetic Catalysis of Hemicellulose from Water Hyacinth Holocellulose Using Glutamic Acid
Ratchahat, Sakhon	Investigation of Biogas Impurities on the Simultaneous Production of H2-rich Syngas and Carbon Nanotubes via CH4/CO2 Reforming using a Novel Ni-Mo2C/MgO Catalyst
Rembo, Egidius	Formulation and Production of Feed Pellets using Organic Waste Materials in Bajawa Disctrict, Ngada Regency, East Nusa Tenggara
Renaldy, Melvin	Evaluation of Kinetic Parameters of Various Operating Conditions for Cellulase Enzyme Fermentation
Renanto, Renanto	Techno-Economic Analysis of Methanol Production from Low Grade Crude Glycerol in Indonesia
Reningtyas, Renung	Optimization Study of Harvest Age and Sun-drying Treatment on the Content of Natural Food Dye and Lutein Isolated from Marigold (Tagetes erecta L.) Flower Waste from Rumah Atsiri Indonesia, Tawangmangu, Indonesia
Restiawaty, Elvi	Low Loading Copper Based Catalyst with Cerium Oxide Support for Medium-Temperature Water Gas Shift Reaction H2 Production through Water Gas Shift Reaction at Medium Temperature using Cu/MCM-41 Nanocatalysts Synthetic Cellulose Nanofiber (CNF) by Electrospinning for Matrix Immobilized Enzyme Thermodynamics, Mass-Energy Balances, and Kinetics Studies of Microalgae Biomass Production System Immobilization of Recombinant Lipase onto Nickel Foam Synthesis and Characterization of Pd-Ag Membranes via a Modified Electroless Plating Method Separation of 3-Monochloropropane-1,2-diol and Glycidyl Esters from Palm Oil using Zeolite and Coconut Shell Activated Carbon Adsorbents
Restiawaty, Elvi	Production of Biodiesel from Cooking Oil using Immobilized Lipase Itb1.1
Revilla, Patricia Nadine	Preparation of Rice Husk-Derived Activated Biochar for Phytohormone Extraction from Waste Coconut Water via Adsorption
Rifialdya, M. Afif	Enhanced Ethylene Conversion to Gasoline-range Liquid Hydrocarbons via PEG-Modified Zeolite Catalysts
Rikin, Mey Shelly	Biomimetic Hydrolysis of Water Hyacinth Cellulose to Glucose Production of Bio-hydrocarbons through Oxidative Decarboxylation of Fatty Acids Using Biomimetic Catalysis
Rinaldi, Kardian	The Role of Glu/Gly/ZIF-8 Edible Film in Improving the Superior Rheological and Water Vapor Barrier Properties and Antibacterial Activity for Active Food Packaging
Rinaldi, Nino	Hybrid Ultrasound and Advanced Oxidation Process Regeneration of Spent RFCC Catalysts: Optimization and Catalytic Performance
Rinanda, Safira Aulia	Removal of Hydrogen Peroxide Interference on Chemical Oxygen Demand Measurement in Wastewater Treated with Fenton Process
Riyadi, Nicholas	Enhancing Adsorption Performance of Hydrothermally-synthesized Zeolite A from Coal Fly Ash through HCl, NH4OH, and NH4NO3 Modification
Rizkiana, Jenny	Evaluation of Several Types of Woody Biomass as Source of Renewable Energy through Gasification Process Utilization of Sugarcane Waste Filter Cake (Blotong) as Alternative Energy Fuel Enhancing Adsorption Performance of Hydrothermally-synthesized Zeolite A from Coal Fly Ash through HCl, NH4OH, and NH4NO3 Modification Chemical Looping Gasification for IGCC Techno-Economic Analysis of Co-firing Sawdust Biomass for Indramayu Power Plant Direct Synthesis of Dimethyl Ether using Batch Reactor Techno-economic Analysis of Utilization Biogas from POME as Coal Co-firing in Steam Power Plants to Reduce Carbon Emissions Exploring Methods for Remediating Low Quality Oil Palm Olein
Rizkiana, Jenny	Sustainable Auto-Oxidation of Glucose to Ethyl Formate in Ethanol: Pathways for Hydrogen Storage and Future Energy Applications through Formic Acid Derivatives
Rochmadi, Rochmadi	Urea Granule Coated with Flexible Polystyrene by Multi Layers Coating Method as Slow Release Fertilizer Influence of Alkenyl Succinic Anhydride (ASA) on Paper Print Quality Effect of Acidic, Neutral, and Alkaline Condition on Biocrude Oil Production from Hydrothermal Liquefaction of Spirulina Platensis Residue
Rosadi, Maulana Yusup	Insight Mechanisms of Nitrate-Nitrogen Adsorption into Palm Oil Wastewater Sludge-Modified Acticated Carbon Changes in Dissolved Organic Matter during POME Treatment using DBD Plasma System Evaluated by Fluorescence Excitation-emission Matrix Analysis
Rosarina, Desy	Optimization of Ultrasound-Assisted Extraction (UAE) Method using Natural Deep Eutectic Solvents (NADES) to Increase Yield of Indonesia Curcumin Extract: Experimental and Modelling
Rubi, Rugi Vicente	Efficient Removal of Microplastic using Devitalized Bog Moss (Sphagnum palustre) Enhanced Filter System Production of Biodiesel from Single-use Mixed Plastic Wastes through Pyrolysis and Subcritical Transesterification Removal of Microplastics using Integrated Magnetic Fe3O4 Nanoparticles Extraction and Layered Filtration Process
Rusmana, Marcela Anandita	Comprehensive Kinetic Study on The Acid Catalyzed Conversion of Xylose and Furfural in Water
Rusyda, Farah Aqila	Formulation of Lignosulfonate Surfactant with Isoamyl Alcohol for Enhanced Oil Recovery
S
Saconsint, Supanida	Investigation of Biogas Impurities on the Simultaneous Production of H2-rich Syngas and Carbon Nanotubes via CH4/CO2 Reforming using a Novel Ni-Mo2C/MgO Catalyst
Sadewa, Pradipta Aji	Effect of Acidic, Neutral, and Alkaline Condition on Biocrude Oil Production from Hydrothermal Liquefaction of Spirulina Platensis Residue
Sadewo, Brilian Ryan	Kinetic Modeling of Oxidation Low-ranked Coal with Hydrogen Peroxide
Safitri, Nur Laili	Insight Mechanisms of Nitrate-Nitrogen Adsorption into Palm Oil Wastewater Sludge-Modified Acticated Carbon
Sahlan, Muhamad	Optimization of Gluconic Acid and Xylonic Acid Biosynthesis from Palm Oil Empty Fruit Bunch Hydrolyzate via Fermentation System Palm Biomass-based for Glass Cleaner Formulation through Fermentation Process by Gluconobacter Oxydans Optimization of Ultrasound-Assisted Extraction (UAE) Method using Natural Deep Eutectic Solvents (NADES) to Increase Yield of Indonesia Curcumin Extract: Experimental and Modelling
Saing, Putri Erna	Electricity Generation from Tofu Wastewater and Palm Oil Mill Effluent (POME) using Microbial Fuel Cell
Sajida, Gita Nur	Low Loading Copper Based Catalyst with Cerium Oxide Support for Medium-Temperature Water Gas Shift Reaction
Sakusabe, Kosuke	Recovery of Gold and Silver from E-waste
Samadhi, Tjokorde Walmiki	The Effect of Solvent and Extraction Temperature on the Antioxidant Properties of some Medicinal Plants
Samadhi, Tjokorde Walmiki	Review and Improvement of Learning Outcomes of Undergraduate Chemical Engineering Program: Curriculum 2024 Case Study The Changing Landscape of Indonesian Higher Education Quality Assurance Policies and its Impact on Engineering Education
Sano, Noriaki	Application of Carbon Nanotube-activated Carbon Hybrid Film to Electrode in Zn-air Battery Investigation of Biogas Impurities on the Simultaneous Production of H2-rich Syngas and Carbon Nanotubes via CH4/CO2 Reforming using a Novel Ni-Mo2C/MgO Catalyst Evaluation of Agglomeration Degree of Fine Particles using Fluorescence Spectra
Sanoe, Meyta	Cellulose Acetate/CNT-based Mixed Matrix Membrane for Methylene Blue Wastewater Treatment
Santi, Ardelia Widya	Enhancing Adsorption Performance of Hydrothermally-synthesized Zeolite A from Coal Fly Ash through HCl, NH4OH, and NH4NO3 Modification
Santoso, Herry	Process Sequences Optimization of Chitosan Extraction from Black Soldier Fly Cocoon
Santoso, Kurniawan Mega	Primary Environmental Impacts Assessment on a Dual-Fuel Power Plant using Producer Gas and Diesel Fuel Mixture
Saptoadi, Harwin	Integrated CFD and ASPEN Plus Simulation for Optimizing Biomass Combustion: A Study on Sugarcane Bagasse
Saputera, Wibawa Hendra	Low Loading Copper Based Catalyst with Cerium Oxide Support for Medium-Temperature Water Gas Shift Reaction Leveraging Light and CO2 Emission with Copper and Nickel-Doped TiO2 Photocatalyst for Methanol Production Biohydrocarbon Synthesis from Fatty Acids through Photocatalytic Hydrogenationdecarboxylation using Titanium Dioxide-Based Catalyst Harnessing Light to Degrade Palm Oil Mill Effluent (POME) using WO3/TiO2 Photocatalysts Harnessing Photocatalytic Technology for Sulfamethoxazole Decomposition using Bismuth Oxide-Bromide Catalysts Separation of 3-Monochloropropane-1,2-diol and Glycidyl Esters from Palm Oil using Zeolite and Coconut Shell Activated Carbon Adsorbents
Saputra, Andri	Utilization of Epoxidized Palm Oil as a Plasticizer in Synthetic Leather
Sarah, Maya	Microwave-assisted Hydro-distillation of Clove Oil from Flower Plant (Syzygium Aromaticum) for Aromatherapy candles
Sari, Eka	Optimization of Ultrasound-Assisted Extraction (UAE) Method using Natural Deep Eutectic Solvents (NADES) to Increase Yield of Indonesia Curcumin Extract: Experimental and Modelling
Sasongko, Adilla Kusumadiyani	Hydrolytic Extraction and Biomimetic Catalysis of Hemicellulose from Water Hyacinth Holocellulose Using Glutamic Acid
Sasongko, Dwiwahju	Leveraging Light and CO2 Emission with Copper and Nickel-Doped TiO2 Photocatalyst for Methanol Production Enhancing Adsorption Performance of Hydrothermally-synthesized Zeolite A from Coal Fly Ash through HCl, NH4OH, and NH4NO3 Modification Harnessing Light to Degrade Palm Oil Mill Effluent (POME) using WO3/TiO2 Photocatalysts Harnessing Photocatalytic Technology for Sulfamethoxazole Decomposition using Bismuth Oxide-Bromide Catalysts
Sasongko, Setyo Yanus	Biogas Conversion via Liquid Phase Oxidation: An Investigation into Methane and Carbon Dioxide Utilization for Formic Acid Production
Sasongko, Setyo Yanus	Biomimetic Hydrolysis of Water Hyacinth Cellulose to Glucose
Sasongko, Setyo Yanus	Sustainable Auto-Oxidation of Glucose to Ethyl Formate in Ethanol: Pathways for Hydrogen Storage and Future Energy Applications through Formic Acid Derivatives
Satria, Arysca Wisnu	Study of the Effectiveness and Productivity of MASARO Organic Liquid Fertilizer in Organic Rice Farming
Satwikanitya, Pani	Utilization of Epoxidized Palm Oil as a Plasticizer in Synthetic Leather
Sausan, Hana	Decreasing Heat Loss and Increasing Drying Capacity of LTPM Polydrier Machine
Savitri, Divani I.	Soil Washing using Green Surfactants for Remediation of Oil-contaminated Soil
Sayyid Akbar, Yusuf	Towards Sustainable Aviation Fuel: Exploring PdMo/Zeolite Catalysts for FAME Hydrodeoxygenation and Technoeconomic Feasibility
Sekiguchi, Hidetoshi	Elucidation of Heating Mechanism of Microwave-heated Fluidized Bed and its Application to Methane Pyrolysis Effect of Electric Field on Water Freezing and its Mechanism
Senador, Raymund	Evaluation of Corrosion and Scaling Propensity in Swimming Pool Water through Langelier Saturation Index (LSI) of Selected Swimming Pools in Negros Oriental, Philippines
Septiaji, Imam Aldi	Vapor-Liquid Equilibrium Prediction for the Binary System of Acetic Acid/Triacetin using the UNIFAC Model
Setiabudi, Herma Dina	Review of Recent Innovations in Solid Polymer Electrolytes for Enhanced Performance and Stability: Advance in Supercapacitor Technologies Review on Structural Correlations of Magnesium Hydride Confined Hollow Fibrous Nanosilica on the Thermodynamic, Kinetics, and Mechanism of Hydrogen Storage System
Setiadi, Tjandra	Development of Aromatic Anion Exchange Copolymers using Biphenyl and P-Terphenyl Monomers for Solid Electrolytes in Water Electrolysis Cells Kinetic, Thermodynamic, Mass Transfer, and Determination of Controlling Steps in Pectin Extraction from Lemon Peel (Citrus Limon L. Osbeck)
Setiawan, Aris	Maximizing Energy Recovery from Pulp and Paper Mill Sludge using Hydrothermal Carbonization
Setiawan, Ignasius Ivan	Utilizing Low-Quality Lignite Coal for Syngas Production via CO2 Gasification
Setiawan, Laurentia	Design and Performance Evaluation of a Solar-powered BWRO for Potable Water Supply: A Case Study in a Coastal Community in Jepara, Central Java - Indonesia
Setkit, Nattawut	Effects of Proton Concentration in the Reaction of Cellulose with Vanadyl Ions
Setyaningsih, Widiastuti	Optimization Study of Harvest Age and Sun-drying Treatment on the Content of Natural Food Dye and Lutein Isolated from Marigold (Tagetes erecta L.) Flower Waste from Rumah Atsiri Indonesia, Tawangmangu, Indonesia
Setyawan, Heru	Teaching Excel as Problem Solving Tool for Chemical Engineering Core Courses
Setyawan, Joshua Theodore	Saprolitic Ore Reduction using Torrefied Biomass for Ferronickel Production
Setyopratomo, Puguh	Cellulose Acetate/CNT-based Mixed Matrix Membrane for Methylene Blue Wastewater Treatment
Shaffa Rizky Chandra, Nabila	Optimization of Ultrasound-Assisted Extraction (UAE) Method using Natural Deep Eutectic Solvents (NADES) to Increase Yield of Indonesia Curcumin Extract: Experimental and Modelling
Shalihah, Rawiyah Khairunida'	H2 Production through Water Gas Shift Reaction at Medium Temperature using Cu/MCM-41 Nanocatalysts
Shimada, Manabu	Fabrication of ZnO/TiO2 using Aerosol Method for Photocatalytic Applications
Shimizu, Yuto	Phase Change Kinetics of Al-Based Micro-Encapsulated Phase Change Materials for Thermal Energy Storage Development
Shioura, Ryu	Effect of Electric Field on Water Freezing and its Mechanism
Shofinita, Dian	Electricity Generation from Tofu Wastewater and Palm Oil Mill Effluent (POME) using Microbial Fuel Cell
Shofinita, Dian	Utilization of Sugarcane Waste Filter Cake (Blotong) as Alternative Energy Fuel
Sholikhah, Eti Nurwening	Molecular Docking and Molecular Dynamics Simulations of Halogenated Xanthone as Novel Anticancer Agents through PDGFR Inhibition Mechanism
Sibarani Ph.D., James	Biocompatible Amphiphilic Copolymers as Drug Delivery Systems for Photodynamic Therapy
Siew Hwa, Chan	Synthesis and Characterization of Pd-Ag Membranes via a Modified Electroless Plating Method
Sihotang, Zahrozi Fithrah	Microwave-assisted Hydro-distillation of Clove Oil from Flower Plant (Syzygium Aromaticum) for Aromatherapy candles
Silitonga, Andreas Boy Aditya	Development of Aromatic Anion Exchange Copolymers using Biphenyl and P-Terphenyl Monomers for Solid Electrolytes in Water Electrolysis Cells
Silviana, Silviana	Hybrid Ultrasound and Advanced Oxidation Process Regeneration of Spent RFCC Catalysts: Optimization and Catalytic Performance
Simanjuntak, Albroston	Development of Aromatic Anion Exchange Copolymers using Biphenyl and P-Terphenyl Monomers for Solid Electrolytes in Water Electrolysis Cells
Sinaga, Angela Regina	Urea Granule Coated with Flexible Polystyrene by Multi Layers Coating Method as Slow Release Fertilizer
Sitompul, Johnner P.	Scaling up of Enhanced Lubricant Production with Extreme Pressure Additive Formulations from Laboratory Scale to Industrial Scale Adsorption Study of Bovine Serum Albumin onto Gallic Acid Modified Fe3O4 Nanoparticles Study of Cereal Flakes Formulation from Sorghum (Sorghum bicolor (L.) Moench) and Mung Bean (Vigna radiata (L.)) with Supporting Ingredient using Design Expert Mixture D-Optimal Method
Soegiri, Michael	Enhancing Adsorption Performance of Hydrothermally-synthesized Zeolite A from Coal Fly Ash through HCl, NH4OH, and NH4NO3 Modification
Soekotjo, Ernie S. A.	Study of the Effectiveness and Productivity of MASARO Organic Liquid Fertilizer in Organic Rice Farming Decreasing Heat Loss and Increasing Drying Capacity of LTPM Polydrier Machine
Soerawidjaja, Tatang Hernas	Production of Bio-hydrocarbons through Oxidative Decarboxylation of Fatty Acids Using Biomimetic Catalysis
Soerawidjaja, Tatang Hernas	Hydrolytic Extraction and Biomimetic Catalysis of Hemicellulose from Water Hyacinth Holocellulose Using Glutamic Acid
Soerawidjaja, Tatang Hernas	Biogas Conversion via Liquid Phase Oxidation: An Investigation into Methane and Carbon Dioxide Utilization for Formic Acid Production
Soerawidjaja, Tatang Hernas	Biomimetic Hydrolysis of Water Hyacinth Cellulose to Glucose
Soerawidjaja, Tatang Hernas	Sustainable Auto-Oxidation of Glucose to Ethyl Formate in Ethanol: Pathways for Hydrogen Storage and Future Energy Applications through Formic Acid Derivatives
Soetantjo, Jordy Hendyputra	Development of Flavonoids and Biodiesel Production Techniques from Malapari (Pongamia pinnata) Seed Oil
Soligan, John Deo	Evaluation of Corrosion and Scaling Propensity in Swimming Pool Water through Langelier Saturation Index (LSI) of Selected Swimming Pools in Negros Oriental, Philippines
Sommeng, Andi Noorsaman	Utilization of Artificial Intelligent (Customized Pretrained Large Language Model) as a Completeness Evaluation for the Hazards and Operability Study (HAZOP) Result
Sommeng, Andy Noorsaman	Collection and Evaluation of Onshore Process Safety Failures and Process Safety Accident as a Tool for Validating Hazards and Operability Study and as an Information for Process Safety Education Utilization of Dynamic Simulation on Gas Blowby Case as a Validation for the Hazards and Operability Study Result Keep Doing the Same Thing and Expecting Different Results - Evaluation for the Reliability of Hazards and Operability Studies Result: Indonesia Case Examining the Completeness for the Process Hazards Analysis Study Result – Evaluation of Safeguards Identification
Song, Ping	Exploration of CALF-20’s Structural Flexibility and CO2 Capture Performance in the Presence of Humidity via Experiments and Simulations
Soraya Santi, Sintha	Effect of Sodium Silica Module on Polymerization Silica Cellulose
Soriano, Allan	An Analysis of the Photocatalytic Degradation of Pharmaceutical and Personal Care Products Utilizing Different Nano-enabled Photocatalysts
Sow, Yee Ting	Cobalt and Nickel Ferrite-Enhanced Polysulfone Membranes for Improved Cu (II) Ion Separation and Hydrophilicity
Steven, Soen	Study of the Effectiveness and Productivity of MASARO Organic Liquid Fertilizer in Organic Rice Farming Decreasing Heat Loss and Increasing Drying Capacity of LTPM Polydrier Machine
Subagjo,	Realizing ZnO Adsorbent with Superior Ambient-Temperature Desulfurization Performance from N2-H2S Gas Mixture
Subagjo, Subagjo	Modelling of Coke Deposition on Cracking Catalyst Base on Y Zeolite in n-Butanol Dehydration
Sudibyo, Hanifrahmawan	Maximizing Energy Recovery from Pulp and Paper Mill Sludge using Hydrothermal Carbonization Bio-energy generation from Pulp and Paper Mill Sludge Using Pyrolysis
Sudiyarmanto, Sudiyarmanto	Sonication-Assisted Synthesis and Characterization of Magnetic Iron Oxide Nanoparticles
Sufian, Fardzil Idham	Effect of Different Binders’ Concentration on The Physicochemical Characteristics of Food Waste Charcoal Briquette
Sufra, Rifqi	Evaluation of Several Types of Woody Biomass as Source of Renewable Energy through Gasification Process
Sugawara, Katsuyasu	Recovery of Gold and Silver from E-waste
Sugih, Asaf K	Adsorption Study of Bovine Serum Albumin onto Gallic Acid Modified Fe3O4 Nanoparticles
Sugito, Bangun	Techno-Economic Evaluation of Post-Combustion Carbon Capture on Subcritical Coal-Fired Power Plant in Indonesia
Suharto, Suharto	Valorization Waste of Gliricidia sepium for Gasification: Study of Integration Pyrolysis Proces for Improvement Syngas Quality Hydrothermal Treatment for Reducing Potassium Content in Solid Fuels Derived from Oil Palm Frond
Sukadana, I Gde	Potassium Extraction from Sanidine Ore using Acid Leaching
Sumampouw, Giovanni Arneldi	Valorization of Oil Palm Trunk (OPT) Waste from Replantation as Feedstock for Black Soldier Fly (BSF) Larvae
Sumardiono, Siswo	Improving the Quality of Robusta Kelir Bean: Optimization of Ultrasound-assisted Extraction Process Parameters using Response Surface Methodology
Suryaga, Kenny	Electricity Generation from Tofu Wastewater and Palm Oil Mill Effluent (POME) using Microbial Fuel Cell
Susanto, Herri	Microsoft Excel in Chemical Engineering Education A Tool in Predicting Gasification Products Hydrothermal Treatment for Reducing Potassium Content in Solid Fuels Derived from Oil Palm Frond Direct Synthesis of Dimethyl Ether using Batch Reactor
Susanto, Herri	Evaluation of Several Types of Woody Biomass as Source of Renewable Energy through Gasification Process
Susanto, Herri	Valorization Waste of Gliricidia sepium for Gasification: Study of Integration Pyrolysis Proces for Improvement Syngas Quality
Susanto, Sendy	Evaluation of Kinetic Parameters of Various Operating Conditions for Cellulase Enzyme Fermentation
Susilo, Henry	Utilization of Dynamic Simulation on Gas Blowby Case as a Validation for the Hazards and Operability Study Result Keep Doing the Same Thing and Expecting Different Results - Evaluation for the Reliability of Hazards and Operability Studies Result: Indonesia Case
Sutisna, Burhannudin	Utilization of Zein from Corn Gluten Meal as a Structure-Forming Additive in Fermented Cassava Breads
Sutopo, Ulung Muhammad	Enhance the CO2 Conversion at Atmospheric Pressure Plasma: Influence of O2 and CO Separation from the Product Stream
Sutrisna, Putu Doddy	Cellulose Acetate/CNT-based Mixed Matrix Membrane for Methylene Blue Wastewater Treatment
Suzuki, Masaya	Analysis of Important Factors in an Off-line Heat Transport System from Industrial Waste Heat for a Sustainable Society using Sensitivity Analysis
Swandi, Khairfirza	Utilization of Kapok Seed Oil for Producing Reverse Ester as Raw Materials for Polyvinyl Chloride Thermal Stabilizer
Sya'Bani, Muh Wahyu	Utilization of Epoxidized Palm Oil as a Plasticizer in Synthetic Leather
Syajidah, Arla Mei	Techno-Economic Analysis of Methanol Production from Low Grade Crude Glycerol in Indonesia
T
Taheri Qazvini, Omid	Exploration of CALF-20’s Structural Flexibility and CO2 Capture Performance in the Presence of Humidity via Experiments and Simulations
Takeda, Haruumi	Enhancement of NO removal by hydrogen peroxide in gas phase in addition to NO oxidation in liquid phase on NOx absorption equipment
Talimbay, Morlie	Machine Learning Models for Predicting Corrosion Inhibition Efficiency on N80 Steel Under HCl and Elevated Temperature Environment
Tampubolon, Ester	Effect of Modified Carboxymethylcellulose Nanoparticles Fortification on the Physical and Sensory Characteristic of Taro Noodles
Tamzysi, Cholila	Phase Change Kinetics of Al-Based Micro-Encapsulated Phase Change Materials for Thermal Energy Storage Development
Tan, Daniel	Process Sequences Optimization of Chitosan Extraction from Black Soldier Fly Cocoon
Tan, Raymond	Deep Decarbonization Pathway of the Cement Industry in ASEAN
Tan-Soetedjo, Jenny Novianti Muliarahayu	Comprehensive Kinetic Study on The Acid Catalyzed Conversion of Xylose and Furfural in Water Pretreatment of Oil Palm Empty Fruit Bunch using Green Organosolvent in Acid and Base Environment
Tanabe, Maika	Bismuth-based Perovskite Thin Film Growth Dynamics in Reaction Engineering Point of View
Thomas, Kevin	Pre-Hydrolysis Kraft Pulp Reactivity Enhancement through Deep Eutectic Solvent for a Sustainable Viscose Production
Timbol, Mariza	Machine Learning Models for Predicting Corrosion Inhibition Efficiency on N80 Steel Under HCl and Elevated Temperature Environment
Timotius, Daniel	Kinetic Modeling of Oxidation Low-ranked Coal with Hydrogen Peroxide
Tiwikrama, Ardila Hayu	Vapor-Liquid Equilibrium Prediction for the Binary System of Acetic Acid/Triacetin using the UNIFAC Model
Togami, Keito	Bismuth-based Perovskite Thin Film Growth Dynamics in Reaction Engineering Point of View
Tokoro, Chiharu	Analysis of Important Factors in an Off-line Heat Transport System from Industrial Waste Heat for a Sustainable Society using Sensitivity Analysis
Tolentino, Karen May A.	Removal of Microplastics using Integrated Magnetic Fe3O4 Nanoparticles Extraction and Layered Filtration Process
Tomentos, Marilou	Exploring the Potential of Agro-Based Natural Fiber Composites for Eco-Friendly Floor Tile Production
Tri Rahkadima, Yulia	Synthesis and Characterization of Pd-Ag Membranes via a Modified Electroless Plating Method
Tyas, Ratih Luhuring	A Bibliometric Analysis and Literature Review for Mapping The State-of- The-Art of Initiating Event Identification Methods
U
Uemiya, Shigeyuki	H2 Production through Water Gas Shift Reaction at Medium Temperature using Cu/MCM-41 Nanocatalysts Synthesis and Characterization of Pd-Ag Membranes via a Modified Electroless Plating Method
Uli, Rospita	Harnessing Light to Degrade Palm Oil Mill Effluent (POME) using WO3/TiO2 Photocatalysts
Urasadevi, Brigitta Tyastami	Optimization of CERIOPS TAGAL Sawdust Extraction for Natural Dye
Utami, Ratri Retno	Utilization of Epoxidized Palm Oil as a Plasticizer in Synthetic Leather
Utomo, Tanto Pratondo	Valorization of Oil Palm Trunk (OPT) Waste from Replantation as Feedstock for Black Soldier Fly (BSF) Larvae
Utomo, Wahyu Prasetyo	Leveraging Light and CO2 Emission with Copper and Nickel-Doped TiO2 Photocatalyst for Methanol Production
V
Vachlepi, Afrizal	Study of the Effectiveness and Productivity of MASARO Organic Liquid Fertilizer in Organic Rice Farming Decreasing Heat Loss and Increasing Drying Capacity of LTPM Polydrier Machine
Van Speybroeck, Veronique	Exploration of CALF-20’s Structural Flexibility and CO2 Capture Performance in the Presence of Humidity via Experiments and Simulations
Vanogari, Ryvaldo	Simulation and Optimization of Simultaneously Acid Gas and Mercaptans Removal System using Amine-blend Solvents
Veny, Harumi	Stability and Kinetic Study of Immobilized Carbonic anhydrase in PVDF Membrane Chemical Characteristic of the Surface Modification of Eco-Processed Pozzolan (EPP) using Amine Solution
Vidal, Eula V.	Removal of Microplastics using Integrated Magnetic Fe3O4 Nanoparticles Extraction and Layered Filtration Process
Villafuerte, Therese Nicole A.	Removal of Microplastics using Integrated Magnetic Fe3O4 Nanoparticles Extraction and Layered Filtration Process
Villarama, Christian Gerard	Efficient Removal of Microplastic using Devitalized Bog Moss (Sphagnum palustre) Enhanced Filter System
W
W, Widiyastuti	Fabrication of ZnO/TiO2 using Aerosol Method for Photocatalytic Applications
Wahid, Abdul	A Review of Anti-surge Control Systems of Centrifugal Compressors
Waluyo, Joko	Physical Characteristics of Mesoporous WO3/SiO2 Composite Particle for Enhanced Photocatalytic Degradation of Rhodamine-B and Crystal Violet The Synthesis of Magnetic Activated Carbon from Palm Kernel Shells and Effectiveness Test on the Methylene Blue
Wan Ramli, Wan Khairunnisa	Cobalt and Nickel Ferrite-Enhanced Polysulfone Membranes for Improved Cu (II) Ion Separation and Hydrophilicity
Wanta, Kevin Cleary	Process Sequences Optimization of Chitosan Extraction from Black Soldier Fly Cocoon
Warmada, I Wayan	Potassium Extraction from Sanidine Ore using Acid Leaching
Wenael, Derry Pratama	Life Cycle Assessment of Kraft Pulp Production through Compact Cooking and Lo-Solids Technology
Wenten, I Gede	Sustainable Water Solutions: The Impact of Modified PVDF Membranes on Atmospheric Water Harvesting
Wibawa, Dita Budi	Collection and Evaluation of Onshore Process Safety Failures and Process Safety Accident as a Tool for Validating Hazards and Operability Study and as an Information for Process Safety Education Examining the Completeness for the Process Hazards Analysis Study Result – Evaluation of Safeguards Identification
Wibawa, Gede	Conceptual Study of CO2 Injection in Geological Storage to Support Carbon Capture and Storage (CCS) Program in Indonesia
Wibisono, Wahyu	Preparation of Ni-Zeolite Catalyst with Varying Calcination Temperature for the Isomerization Process of Glucose to Fructose in Various Solvents
Wibowo, Agung Ari	Vapor-Liquid Equilibrium Prediction for the Binary System of Acetic Acid/Triacetin using the UNIFAC Model
Wibowo, Andi	Design and Performance Evaluation of a Solar-powered BWRO for Potable Water Supply: A Case Study in a Coastal Community in Jepara, Central Java - Indonesia
Wibowo, Wusana	The Synthesis of Magnetic Activated Carbon from Palm Kernel Shells and Effectiveness Test on the Methylene Blue
Wicaksono, Jonathan Bagus	Utilization of Kapok Seed Oil for Producing Reverse Ester as Raw Materials for Polyvinyl Chloride Thermal Stabilizer
Wicaksono, Muhammad Hanif	Formulation of Lignosulfonate Surfactant with Isoamyl Alcohol for Enhanced Oil Recovery
Widawati, Teta Fathya	Kinetic Modeling of Oxidation Low-ranked Coal with Hydrogen Peroxide
Widhiastuty, Made Puspasari	Production of Biodiesel from Cooking Oil using Immobilized Lipase Itb1.1
Widiantoro, Dwi	Exploratory Data Analysis of FCC Catalyst: A Simulation-Based Study using Aspen HYSYS
Widiasa, I Nyoman	Design and Performance Evaluation of a Solar-powered BWRO for Potable Water Supply: A Case Study in a Coastal Community in Jepara, Central Java - Indonesia
Widiatmoko, Pramujo	Preparing Human Resources to Build Process Safety Competency Introduction of Electrochemical Corrosion to Chemical Engineer through Educational Laboratory: Deliverability and Lesson Learned Enhancement of Zinc-Air Battery Performance using Polyvinyl Alcohol and Chitosan as Binders for Porous Zinc Anodes Morphological and Thermal Stability Analysis of Sn/C Electrodes Synthesized through Impregnation and Precipitation Methods for CO2 Electroreduction Simulation and Optimization of Simultaneously Acid Gas and Mercaptans Removal System using Amine-blend Solvents
Widuri, Noorika Retno	A Bibliometric Analysis and Literature Review for Mapping The State-of- The-Art of Initiating Event Identification Methods
Widyandaru, Dominico S.	Soil Washing using Green Surfactants for Remediation of Oil-contaminated Soil
Wijaya, Gunawan	Techno-economic Analysis of Utilization Biogas from POME as Coal Co-firing in Steam Power Plants to Reduce Carbon Emissions
Wijayanti, Rizky Berliana	The Effect of Solvent and Extraction Temperature on the Antioxidant Properties of some Medicinal Plants
Winardi, Sugeng	Fabrication of ZnO/TiO2 using Aerosol Method for Photocatalytic Applications
Winoto, Haryo Pandu	Low Loading Copper Based Catalyst with Cerium Oxide Support for Medium-Temperature Water Gas Shift Reaction Towards Sustainable Aviation Fuel: Exploring PdMo/Zeolite Catalysts for FAME Hydrodeoxygenation and Technoeconomic Feasibility
Wintoko, Joko	Kinetic Modeling of Oxidation Low-ranked Coal with Hydrogen Peroxide Soil Washing using Green Surfactants for Remediation of Oil-contaminated Soil Removal of Hydrogen Peroxide Interference on Chemical Oxygen Demand Measurement in Wastewater Treated with Fenton Process Calcium Reduction in Dissolving Pulp through Optimization of the First Stage of the Bleaching Process
Wipogso, Lac Hirna	From Waste to Energy: Optimizing Organic-Solid-Refused-Fuel (OSRF) for Sustainable Power Generation.
Wiratama, I Gede Pandega	Comprehensive Kinetic Study on The Acid Catalyzed Conversion of Xylose and Furfural in Water
Wisnu Satria, Arysca	Valorization Waste of Gliricidia sepium for Gasification: Study of Integration Pyrolysis Proces for Improvement Syngas Quality
Witono, Judy Retti	Process Sequences Optimization of Chitosan Extraction from Black Soldier Fly Cocoon
Wonoputri, Vita	Review and Improvement of Learning Outcomes of Undergraduate Chemical Engineering Program: Curriculum 2024 Case Study The Effect of Solvent and Extraction Temperature on the Antioxidant Properties of some Medicinal Plants Introduction of Electrochemical Corrosion to Chemical Engineer through Educational Laboratory: Deliverability and Lesson Learned Evaluation of Kinetic Parameters of Various Operating Conditions for Cellulase Enzyme Fermentation Formulation and Production of Feed Pellets using Organic Waste Materials in Bajawa Disctrict, Ngada Regency, East Nusa Tenggara
Wu, Aurey Josephine	Pretreatment of Oil Palm Empty Fruit Bunch using Green Organosolvent in Acid and Base Environment
Wulandari, Winny	Enhancing Adsorption Performance of Hydrothermally-synthesized Zeolite A from Coal Fly Ash through HCl, NH4OH, and NH4NO3 Modification Saprolitic Ore Reduction using Torrefied Biomass for Ferronickel Production
Y
Yang, Ziguang	Bismuth-based Perovskite Thin Film Growth Dynamics in Reaction Engineering Point of View
Yasuda, Masahiro	Enhancement of NO removal by hydrogen peroxide in gas phase in addition to NO oxidation in liquid phase on NOx absorption equipment
Yazid, Nurul Ain	Effect of Different Binders’ Concentration on The Physicochemical Characteristics of Food Waste Charcoal Briquette
Yemensia, Elsye Veradika	Study of the Effectiveness and Productivity of MASARO Organic Liquid Fertilizer in Organic Rice Farming Decreasing Heat Loss and Increasing Drying Capacity of LTPM Polydrier Machine
Yoshiie, Ryo	Enhance the CO2 Conversion at Atmospheric Pressure Plasma: Influence of O2 and CO Separation from the Product Stream
Yudha, Wahid Satria	Development of Flavonoids and Biodiesel Production Techniques from Malapari (Pongamia pinnata) Seed Oil
Yulina, Yulina	Caustic remediation of oil palm olein free fatty acid in production of nutritious red palm oil (revised) Exploring Methods for Remediating Low Quality Oil Palm Olein
Yulizar, Yoki	Analysis of Cellulose, Hemicellulose and Lignin Compsition in West Java and Banten Coconut Fiber: Chesson Method
Yulvianti, Meri	Effect of the Addition of Polyethylene Glycol (PEG) on the Mechanical Strength and Biodegradation Rate of Cellulose Acetate Edible Film
Yuniarti, Reni	Simulation and Optimization of Simultaneously Acid Gas and Mercaptans Removal System using Amine-blend Solvents
Yusupandi, Fauzi	Preparing Human Resources to Build Process Safety Competency Simulation and Optimization of Simultaneously Acid Gas and Mercaptans Removal System using Amine-blend Solvents
Z
Zahratunnisa, Zahratunnisa	Surface Characteristics of PVDF Membranes using PEG and Non-PEG
Zaky Azen Ramadhan, Azam	Effect of Chitosan Addition on The Mechanical Properties and Antibacterial Activity of Polylactic Acid (PLA)/Cellulose Acetate (CA) Based Film Composites
Zaurida, Evia Salma	Surface Characteristics of PVDF Membranes using PEG and Non-PEG
Zhu, Ting	Preparation of Fluorescent Silica Nanoparticles and Evaluation of Particle Size and Fluorescence Intensity
Zuchrillah, Daril Ridho	Optimization of Cone Angle and Inlet Pipe Diameter in Spouted Bed Sorghum Grain Dryer using Computational Fluid Dynamics Method Optimization of Ultrasonication Amplitude in the Fabrication of ZnO/g-C3N4 Nanocomposites for Enhanced Photocatalytic Performance

Disclaimer | Powered by EasyChair Smart Program