Simplified Method to Predict the Failure of Wood Truss Floor Assemblies in Fire

Syed Muhamad Shamaim Ali and Thomas Gernay

Fire Behavior of Concrete Filled Korean-Type Composite Beams with Fire-Protection

Norovbadam Dashdemberel, Seulgi Han, Inrak Choi, Jeongki Min and Sungmo Choi

Fire Behavior of Protected Korean Square CFST Columns

Seulgi Han, Jinwon Shin, Seunghwan Baek, Sungbae Kim and Sungmo Choi

Performance-Based Design of Passive Fire Protection for Steel Bridge Girders

Spencer Quiel, Saidong Ma and Zheda Zhu

Predicting Steel Temperatures of Beams and Columns in Modular Buildings Using Full-Scale Tests and Numerical Heat Transfer Analysis

Hyuk Kim, Chang-Hwan Lee, Thomas Gernay and Min Jae Park

Residual Shear Transfer Strength of Steel Fibre-Reinforced Concrete After Exposure to Elevated Temperatures

Md. Yusuf, Salah Sarhat and Mark Green

Computational Modeling of Timber Columns Subjected to Furnace and Compartment Fire Tests

Yu Niu and Thomas Gernay

Towards Data-Driven and Explainable AI for Structural Fire Safety: Predicting Bond Performance at Elevated Temperatures

Rwayda Al-Hamd, Asad Albostami, Yong Wang, M. Z. Naser and John Gales

Mechanical Characterisation of Timber in Compression Under Transient Heating

Zane Ladhani, Danny Hopkin and Luke Bisby

Structural Fire Response to Multi-Storey Fires

Yavor Panev, Momoi Suda, Zena Protcenko and Graeme Flint

Fire-Induced Thermal Responses of CFT Columns Using FDS-ABAQUS Coupled Analysis Under Real-Scale Compartment Fires

Hansol Lee, Jinwon Shin, Sun-Hee Kim, Jeong-Ki Min, In-Rak Choi and Sung-Mo Choi

Combination of Two-Zone and Localised Fire Models for Performance-Based Fire Design of Single-Storey Steel Industrial Hall

Batuhan Der, Nicola Tondini, Thomas Gernay and Antoine Glorieux

Temperature Distribution Assessment of GIR Column-Beam Connections for Mid- to High-Rise Timber Building

Sungmo Choi, Seulgi Han, Sunhee Kim, Yonghyun Cho and Inhwan Yeo

Predicting Fire Endurance of Shear-Critical Fibre-Reinforced Lightweight Aggregate Concrete Continuous Beams Through Strut-and-Tie Approach

Christopher Kevinly, Panwei Du, Bak Koon Teoh and Kang Hai Tan

Experimental Study on Residual Pull-out Behavior of Post-Installed Metal Anchors After Fire Exposure

Kenta Yamazaki, Soichiro Horii, Masaki Kato and Satoru Sakai

Numerical Analysis on Structural Fire Behavior of Rectangular CFT Columns with Different Aspect Ratios

Do Jin Jung, Van Lanh Le, Chang-Hwan Lee and Min Jae Park

Framework for Quantified Risk Assessment of Bridge Fire Safety

Yavor Panev, Katarzyna Jaworska, Anna Benoit, Eoin O'Loughlin and Graeme Flint

Behavior of Bolted Connections Between Fe-SMA and Steel in Fire

Xinran Duan, Xu Jiang and Xuhong Qiang

Consequence Assessment of Structures Exposed to Gas Transmission Pipeline Rupture-Induced Fire

Yohannes Shewalul, Kai Ji, Vincent Iacobellis and Solomon Tesfamariam

Post-Fire Material Properties of Pre-Strained Jis Sn400b Steel: Experimental Study

Kai Ye, Kota Aoki and Masaki Kato

Fire Hazard Assessment of a Steel Truss Bridge Subjected to Hydrocarbon Pool Fires: High-Fidelity Thermal Exposure Modeling

Islam Gomaa and Masoud Adelzadeh

Fire Performance of Fe-SMA Materials and Steel Joints Assembled with Fe-SMA Bolts

Zhihao Chen, Xu Jiang and Xuhong Qiang

Behavior of Cyclically-Damaged Fe-SMA and Structural Steels in Fire

Yuhan Wang, Xu Jiang and Xuhong Qiang