UKHTC-2024: 18TH UK HEAT TRANSFER CONFERENCE

A
Abbas, Anam	CONTROLLING DROPLET SIZE DENSITY DURING DROPWISE CONDENSATION ON SILICONE OIL GRAFTED SURFACES
Adanan, Nur Qalishah	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Afgan, Imran	Conjugate Heat Transfer Analysis of Floating Photovoltaic Panels with Hybrid Natural Convection Cooling Loops and Solar Filter
Ahmed, Abdallah	EXPERIMENTAL ANALYSIS OF FILM HOLE WALL HEAT TRANSFER ‎USING TRANSIENT LIQUID CRYSTALS
Al Miaari, Ahmad	TEMPERATURE PREDICTION OF HEAT SINK BASE INTEGRATED WITH COPPER FOAMPHASE CHANGE MATERIAL USING MACHINE LEARNING FOR THERMAL MANAGEMENT APPLICATIONS
Al-Dadah, Raya	Integrated Two-Phase Immersion Cooling of Electric Vehicle Batteries with Organic Rankine Cycle
Al-Gburi, Fahad	EFFECT OF INTERFACIAL FORCE ON FLOW BEHAVIOR AND LIQUID FILM THICKNESS IN THREE-PHASE TAYLOR FLOW Numerical Modelling of Multi-Phase Taylor Flow with Nanoparticles using MPPIC-VOF approach for Heat Transfer Enhancement
Alabdullatif, Mohammed	INVESTIGATING COLLOIDAL STABILITY OF NANO-ENHANCED PHASE CHANGE MATERIAL UNDER THERMAL CYCLING MORPHOLOGICAL TRANSITIONS IN FROZEN COLLOIDAL DROPLETS
Alajmi, Abdullah	Mechanical Treatment of Agglomerated Ca(OH)2/CaO Particles during Thermal Energy Storage Reactions
Alamoudi, Ahmed	STUDY OF NATURAL CONVECTION OVER VERTICAL AND INCLINED FIN ARRAYS
Alaswad, Abed	MATERIAL-LEVEL EXPERIMENTAL EVALUATION OF SOIL-BASED THERMAL ENERGY STORAGE FOR SOLAR-POWERED ADSORPTION REFRIGERATION SYSTEM
Alexander, William	FASTT - AN ALTERNATIVE TO HEATPIPE AND MICROCHANNEL HEAT TRANSFER TECHNOLOGIES
Alhendal, Yousuf	The Effect of The Temperature Gradient on The Thermocapillary Droplet Flow in a Vibrating Fluid Inside a Rotating Cylinder
Ali, Abdelmagid	Investigating RANS Predictions for Heat and Mass Transfer in Turbulent Flow Across a Backward-Facing Step
Ali, Hafiz	TEMPERATURE PREDICTION OF HEAT SINK BASE INTEGRATED WITH COPPER FOAMPHASE CHANGE MATERIAL USING MACHINE LEARNING FOR THERMAL MANAGEMENT APPLICATIONS A COMPARISON OF HEAT TRANSFER DURING FREE CONVECTION CONDENSATION OF STEAM ON HORIZONTAL COPPER INTEGRAL FIN AND PIN-FIN TUBES SOLAR DESALINATION INNOVATIONS: A COMPARATIVE ANALYSIS OF PYRAMID AND INCLINED SOLAR STILL
Allan-Jones, Henry	Using CFD to Improve the Heat Transfer Performance of an Oil Spray cooling System for an Electric Motor by varying the Inclination Angle
Allen, Stuart	HEAT CONDUCTIVITY FOR THE ALUMINIUM SCRAP IN A DE-COATING FURNACE
Almuwailhi, Abdulrahman	STUDY OF NATURAL CONVECTION OVER VERTICAL AND INCLINED FIN ARRAYS
Alotaibi, Salem	Mechanical Treatment of Agglomerated Ca(OH)2/CaO Particles during Thermal Energy Storage Reactions
Alotaibi, Sorour	Mechanical Treatment of Agglomerated Ca(OH)2/CaO Particles during Thermal Energy Storage Reactions
Alqallaf, Fatimah	The Effect of The Temperature Gradient on The Thermocapillary Droplet Flow in a Vibrating Fluid Inside a Rotating Cylinder
Alraddadi, Khalid	Investigating RANS Predictions for Heat and Mass Transfer in Turbulent Flow Across a Backward-Facing Step
Ambrose, Stephen	A NOVEL MULTISCALE THERMAL METHODOLOGY FOR APPLICATION IN AEROSPACE TRANSMISSION SYSTEMS
Arafat, Syed Muhammad	Multi-objective robust operation-optimization of gas turbine system installed in industrial combined cycle gas power plant
Arteconi, Alessia	Dynamic Analysis of Adsorption Heat Transformation: A Dimensionless Model Approach for Comparative Evaluation of Sorption Bed Designs
Arumugam, Aanandsundar	THERMAL PERFORMANCE EVALUATION OF LITHIUM POLYMER BATTERIES: A COMPARISON OF PCM AND PCM WITH METAL FOAMS, FOR THERMAL REGULATION
Ashraf, Waqar Muhammad	Multi-objective robust operation-optimization of gas turbine system installed in industrial combined cycle gas power plant
Aydin, Orhan	FLEXIBLE POLYMERIC PULSATING HEAT PIPES: FABRICATION TECHNIQUES AND THERMAL PERFORMANCE INVESTIGATION
B
Bach, Christian	Latest improvements in additively manufactured aerospike rocket engine
Bahal, Simrandeep	MORPHOLOGICAL TRANSITIONS IN FROZEN COLLOIDAL DROPLETS FUNCTIONALIZED COVALENT ORGANIC FRAMEWORKS FOR ICE NUCLEATION INHIBITION
Baker, Henry	ENHANCING HEAT TRANSFER IN MICRO PIN FIN HEAT SINKS USING FLOW OSCILLATIONS
Balabani, Stavroula	INVESTIGATING COLLOIDAL STABILITY OF NANO-ENHANCED PHASE CHANGE MATERIAL UNDER THERMAL CYCLING
Balazadeh Koucheh, Amin	EXPERIMENTAL STUDIES ON TWO-PHASE HFE-7000 FOR BATTERY THERMAL MANAGEMENT
Banda, Handsome	Novel Composite Adsorbents to Enhance Heat and Mass Transfer in Adsorption Cooling and Desalination Systems
Bandhauer, Todd M.	PERFORMANCE OF AN AMBIENT-TEMPERATURE-SOURCE STEAM-GENERATING HEAT PUMP
Baniasadi, Ehsan	Novel Composite Adsorbents to Enhance Heat and Mass Transfer in Adsorption Cooling and Desalination Systems MATERIAL-LEVEL EXPERIMENTAL EVALUATION OF SOIL-BASED THERMAL ENERGY STORAGE FOR SOLAR-POWERED ADSORPTION REFRIGERATION SYSTEM
Bastida, Hector	DYNAMIC MODELLING OF LATENT HEAT THERMAL ENERGY STORAGE UNITS BASED ON PLATE-TYPE HEAT EXCHANGERS
Bağcı, Özer	ANALYSIS OF HEAT EXCHANGER MODELS UNDER DRY, WET, AND FROST CONDITIONS FOR THE EVAPORATORS OF HEAT PUMPS
Benhamadouche, Sofiane	SCOPING ANALYSES FOR THE DEFINITION OF NEW EXPERIMENTS FOR NATURAL CONVECTION AT HIGH RAYLEIGH NUMBERS. NUMERICAL INVESTIGATION OF THE MAINLY AXIAL FLOW IN MIXED CONVECTION REGIME WITHIN TUBE BUNDLES
Benouis, Fatima Zohra	OPTIMIZING HEAT TRANSFER EFFICIENCY: EXPERIMENTAL ANALYSIS OF WIRE-COIL INSERTS IN RECTANGULAR TUBES UNDER NON-UNIFORM HEAT FLUX CONDITIONS
Bernagozzi, Marco	TOWARDS THE IMPLEMENTATION OF LOOP HEAT PIPES IN AUTOMOTIVE BATTERY THERMAL MANAGEMENT SYSTEMS FLEXIBLE POLYMERIC PULSATING HEAT PIPES: FABRICATION TECHNIQUES AND THERMAL PERFORMANCE INVESTIGATION
Bertola, Volfango	POLYMER MATERIALS IN PULSATING HEAT PIPES: CHALLENGES AND OPPORTUNITIES FLEXIBLE POLYMERIC PULSATING HEAT PIPES: FABRICATION TECHNIQUES AND THERMAL PERFORMANCE INVESTIGATION
Bock, Bradley	THE ROLE OF BUBBLE DYNAMICS IN THE ENHANCEMENT OF FALLING FILM REFRIGERANT BOILING
Bonetti, Rossella	ADVANCEMENTS IN EXPERIMENTAL INFRASTRUCTURE FOR LEAD FAST REACTOR RESEARCH: THE VLF AND PHRF FACILITIES
Brown, Sophie	VALIDATION OF UNSTEADY RANS AGAINST LES CALCULATIONS FOR PREDICTING NATURAL CIRCULATION STALL PHENOMENA WITHIN A TEST FACILITY LOOP
Brückner, Frank	Latest improvements in additively manufactured aerospike rocket engine
Brüggemann, Dieter	Single bubble nucleate pool boiling for climate friendly cooling solutions
Buchholz, Maximilian	Latest improvements in additively manufactured aerospike rocket engine
Buonomo, Bernardo	THERMAL PERFORMANCE EVALUATION OF LITHIUM POLYMER BATTERIES: A COMPARISON OF PCM AND PCM WITH METAL FOAMS, FOR THERMAL REGULATION
Burges, William	EVALUATING THE GREENHOUSE GAS EMISSIONS REDUCTION POTENTIAL DUE TO THE USE OF HEAT PUMPS
C
Cairns, Alasdair	NUMERICAL STUDY OF OIL JET COOLING FOR HAIRPIN WINDING MOTORS IN ELECTRIC VEHICLES
Cairns, Alasdair	THERMAL MANAGEMENT CHALLENGES OF LI-ION BATTERY PACKS USING PARTIAL IMMERSION COOLING: ANALYZING PRESSURE DROP AND TEMPERATURE DISTRIBUTION CONJUGATE HEAT TRANSFER ANALYSIS OF A POUCH CELL LI-ION BATTERY PACK USING MINI CHANNEL COLD PLATES WITH A U-SHAPED CONFIGURATION
Candan Candere, Ayse	FLEXIBLE POLYMERIC PULSATING HEAT PIPES: FABRICATION TECHNIQUES AND THERMAL PERFORMANCE INVESTIGATION
Caramello, Marco	ADVANCEMENTS IN EXPERIMENTAL INFRASTRUCTURE FOR LEAD FAST REACTOR RESEARCH: THE VLF AND PHRF FACILITIES
Caruso, Gianfranco	Computational magnetohydrodynamics codes for the development of liquid metal breeding blankets in magnetic fusion reactors
Cenk Ünlü, Ahmet	EXPERIMENTAL STUDIES ON TWO-PHASE HFE-7000 FOR BATTERY THERMAL MANAGEMENT
Chae, Myeong-Seon	SCOPING ANALYSES FOR THE DEFINITION OF NEW EXPERIMENTS FOR NATURAL CONVECTION AT HIGH RAYLEIGH NUMBERS.
Chai, Lei	CONDENSATION ON A VERTICAL PLATE WITH SINUSOIDAL MICROFINS – FURTHER CONSIDERATIONS
Chakraborty, Prodyut	EVAPORATION IN THIN WATER FILM UNDER REDUCED PRESSURE CONDITIONS: HEAT AND MASS TRANSFER CHARACTERISTICS
Chen, Yongxiu	A NUMERICAL INVESTIGATION ON THERMAL MANAGEMENT SYSTEM DESIGN FOR 4680 CYLINDRICAL LITHIUM-ION BATTERIES
Chiu, Tzu-Hsuan	NATURAL CONVECTION OF DIFFERENTIAL HEATED CAVITY WITH POLYMER ADDITIVES
Ciappi, Lorenzo	Numerical analysis of a thermal energy storage system with phase change material based on plate heat exchanger with roll-bond design
Cioncolini, Andrea	URANS STUDY OF THERMAL TRANSIENTS IN A T-JUNCTION PIPE Conjugate Heat Transfer Analysis of Floating Photovoltaic Panels with Hybrid Natural Convection Cooling Loops and Solar Filter
Clarke, Stuart	DIRECT THERMAL MANAGEMENT FOR LITHIUM ION BATTERIES
Clemens, Francois	FLEXIBLE POLYMERIC PULSATING HEAT PIPES: FABRICATION TECHNIQUES AND THERMAL PERFORMANCE INVESTIGATION
Cockerill, Timothy	Multi-Objective Optimization of the Thermal Management of Electric Vehicle Using Cold Plate Technology
Coletti, Francesco	PREDICTION OF FOULING BY CALCIUM PHOSPHATE IN A COOLING WATER SYSTEM USING MACHINE LEARNING
Coletti, Francesco	A MACHINE LEARNING APPROACH FOR THE PREDICTION OF FLOW BOILING HEAT TRANSFER COEFFICIENTS IN SMALL TO MICRO-TUBES
Cotta, Renato Machado	RECENT PROGRESSES ON FUNDAMENTALS AND APPLICATIONS OF COMPUTATIONAL-ANALYTICAL INTEGRAL TRANSFORMS
Couto, Paulo	RECENT PROGRESSES ON FUNDAMENTALS AND APPLICATIONS OF COMPUTATIONAL-ANALYTICAL INTEGRAL TRANSFORMS
Craft, Timothy	Effect of Partial Heating on Natural Convection in a Cubical Cavity with an Internal Obstacle: A URANS Study Modelling Sprays of Liquids into Gases and Vapours
Cranmer, Jakub	Numerical Modelling of Condensation Phenomena for Subcooled Flow Boiling Applications
Critoph, Robert	EVALUATION OF AMMONIA-SALT MIXTURE REACTIONS
D
D'Ignazi, Chiara	Heat Pumps: Enablers of Decarbonization - Assessment of the use of artificial neural networks to detect and diagnose some soft faults in heat pumps
Dai, Mingjin	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Dan, Dan	Harnessing Microwave and Heat Exchanger for Enhanced Hydrogen Desorption in MgH2 Hydride Storage System
Davies, Heather	VALIDATION OF UNSTEADY RANS AGAINST LES CALCULATIONS FOR PREDICTING NATURAL CIRCULATION STALL PHENOMENA WITHIN A TEST FACILITY LOOP
Debenest, Gérald	On the numerical prediction of the evaporation rate of a horizontal water span
DeBoer, Greg	Multi-Objective Optimization of the Thermal Management of Electric Vehicle Using Cold Plate Technology
Diaz-Bejarano, Emilio	PREDICTION OF FOULING BY CALCIUM PHOSPHATE IN A COOLING WATER SYSTEM USING MACHINE LEARNING
Diaz-Guardamino, Borja	FULLY-RESOLVED INTERFACE CAPTURING SIMULATIONS OF SINGLE BUBBLE GROWTH AND MICROLAYER FORMATION ON AN ISOTHERMAL SUPERHEATED SURFACE IN POOL BOILING CONDITIONS
Ding, Yulong	EFFECT OF INTERFACIAL FORCE ON FLOW BEHAVIOR AND LIQUID FILM THICKNESS IN THREE-PHASE TAYLOR FLOW Numerical Modelling of Multi-Phase Taylor Flow with Nanoparticles using MPPIC-VOF approach for Heat Transfer Enhancement
Dirker, Jaco	FLOW BEHAVIOUR AND WALL TEMPERATURE DISTRIBUTION OF LOW CONCENTRATION BUTANOL-WATER MIXTURE FLOW BOILING UNDER DIFFERENT FLOW ORIENTATION
Dole, Alexis	Direct contact gas to solid, high pressure moving packed bed heat exchanger for Pumped Thermal Energy Storage
Dong, Zhaogang	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Dorow-Gerspach, Daniel	QUALIFICATION AND TESTING OF MATERIALS AND COMPONENTS FOR APPLICATIONS IN FUSION
Droegemueller, Peter	ENHANCEMENT FOR LAMINAR FLOW USING STATIC IN-TUBE DEVICES
Dua, Vivek	Multi-objective robust operation-optimization of gas turbine system installed in industrial combined cycle gas power plant
Duan, Fei	REFLECTING HYDROTHERMAL WAVES FROM FLOW MEASUREMENT IN SESSILE DROPLET
Dubas, Aleksander	DNS of Magnetohydrodynamic Rayleigh-Bénard Convection with Applications in Fusion Thermal Hydraulics
Duffal, Vladimir	NUMERICAL INVESTIGATION OF THE MAINLY AXIAL FLOW IN MIXED CONVECTION REGIME WITHIN TUBE BUNDLES
E
Eastwick, Carol	A NOVEL MULTISCALE THERMAL METHODOLOGY FOR APPLICATION IN AEROSPACE TRANSMISSION SYSTEMS
Egea, Alberto	OPTIMIZING HEAT TRANSFER EFFICIENCY: EXPERIMENTAL ANALYSIS OF WIRE-COIL INSERTS IN RECTANGULAR TUBES UNDER NON-UNIFORM HEAT FLUX CONDITIONS
Everts, Marilize	Single bubble nucleate pool boiling for climate friendly cooling solutions
F
Falcone, Matthew	Analysis of thermal stratification in a liquid sodium test facility
Favero, Giacomo	Additive Manufacturing for Thermal Management applications: advantages and current limitations
Fellmoser, Frank	LOW-PRANDTL NUMBER HEAT TRANSFER FLUIDS IN PACKED-BED HEAT STORAGE
Fender, Thomas	EVALUATING THE GREENHOUSE GAS EMISSIONS REDUCTION POTENTIAL DUE TO THE USE OF HEAT PUMPS
Ferroni, Paolo	CFD Modelling of Lead Solidification and Natural Convection for the Westinghouse Lead-cooled Fast Reactor
Flageul, Cedric	NUMERICAL INVESTIGATION OF THE MAINLY AXIAL FLOW IN MIXED CONVECTION REGIME WITHIN TUBE BUNDLES
Franken, Lukas	Can Enhanced Geothermal Systems Decrease the Cost of a Decarbonised Sector-Coupled European Energy System?
Frignani, Michele	ADVANCEMENTS IN EXPERIMENTAL INFRASTRUCTURE FOR LEAD FAST REACTOR RESEARCH: THE VLF AND PHRF FACILITIES
G
Gago, Mauricio	QUALIFICATION AND TESTING OF MATERIALS AND COMPONENTS FOR APPLICATIONS IN FUSION
Garcia, Alberto	OPTIMIZING HEAT TRANSFER EFFICIENCY: EXPERIMENTAL ANALYSIS OF WIRE-COIL INSERTS IN RECTANGULAR TUBES UNDER NON-UNIFORM HEAT FLUX CONDITIONS
Garimella, Srinivas	Heat Pumps: The solution to many of humankind’s essential challenges RADIO FREQUENCY CALCINATION OF GYPSUM FOR SUSTAINABLE WALLBOARD PRODUCTION
Gennari, Gabriele	A COUPLED MOLECULAR-CONTINUUM FRAMEWORK FOR MULTISCALE SIMULATIONS OF BOILING
Georgoulas, Anastasios	TOWARDS THE IMPLEMENTATION OF LOOP HEAT PIPES IN AUTOMOTIVE BATTERY THERMAL MANAGEMENT SYSTEMS FLEXIBLE POLYMERIC PULSATING HEAT PIPES: FABRICATION TECHNIQUES AND THERMAL PERFORMANCE INVESTIGATION
Gillespie, David	A Simple Transient Approach to Measuring Thermal Contact Conductance at Low Contact Pressures
Giovannini, Michael	Steady-state Modelling of Heat Exchangers for Refrigeration Applications
Giustini, Giovanni	FULLY-RESOLVED INTERFACE CAPTURING SIMULATIONS OF SINGLE BUBBLE GROWTH AND MICROLAYER FORMATION ON AN ISOTHERMAL SUPERHEATED SURFACE IN POOL BOILING CONDITIONS Numerical Modelling of Condensation Phenomena for Subcooled Flow Boiling Applications
Golkaram, Shirin	HEAT TRANSFER MODELLING OF GRANULAR FLOW IN POROUS MEDIA
Gruber, Samira	Latest improvements in additively manufactured aerospike rocket engine
Guibert, Romain	On the numerical prediction of the evaporation rate of a horizontal water span
H
Hajabdollahi, Zahra	DYNAMIC SIMULATION AND PERFORMANCE COMPARISON OF TWO-STAGE AND SINGLE-STAGE HEAT PUMPS WITH INTERMEDIATE TEMPERATURE CONTROL
Hamada, Kenta	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Han, Lucong	THE APPLICATION OF PHASE CHANGE MATERIALS IN FOOD PRESERVATION USING INDIRECT TYPE SOLAR DRYER (ITSD)
Han, Wei	Distributed Fibre Optic Sensors for Solid-Liquid Phase Change Detection in Thermal Energy Storage Applications
Hann, David	EFFECT OF VISCOSITY ON VOID FRACTION OF A GAS-LIQUID FLOW IN VERTICAL PIPE
Harmand, Souad	NUMERICAL STUDY OF OIL JET COOLING FOR HAIRPIN WINDING MOTORS IN ELECTRIC VEHICLES
Haw, Choon-Yian	BIOMASS-DERIVED 2D AND 3D PHOTOABSORBERS: INSIGHTS INTO HEAT PROLIFERATION FOR ENHANCED PHOTOTHERMAL INTERFACIAL SOLAR STEAM GENERATION (ISSG)
He, Jundi	Direct numerical simulations of forced and mixed convection flows in a reactor vessel auxiliary cooling system (RVACS)
He, Shuisheng	Direct numerical simulations of forced and mixed convection flows in a reactor vessel auxiliary cooling system (RVACS) THERMAL HYDRAULIC SAFETY CONSIDERATIONS, METHODS AND RESEARCH FOR HIGH-TEMPREATURE GAS-COOLED REACTORS (HTGRs) Analysis of thermal stratification in a liquid sodium test facility
Hegarty, Joseph	VALIDATION OF UNSTEADY RANS AGAINST LES CALCULATIONS FOR PREDICTING NATURAL CIRCULATION STALL PHENOMENA WITHIN A TEST FACILITY LOOP
Heggs, Peter J.	ACOUSTIC ENHANCEMENT OF MALTODEXTRIN DROPLET DRYING: INSIGHTS FROM MODELLING AND EXPERIMENTAL OBSERVATIONS EXTENDED HEAT TRANSFER MODEL OF A JACKETED BATCH STIRRED TANK REACTOR
Hehar, Roshan	EVALUATING THE GREENHOUSE GAS EMISSIONS REDUCTION POTENTIAL DUE TO THE USE OF HEAT PUMPS
Henry, Oluwatobiloba	ENHANCEMENT FOR LAMINAR FLOW USING STATIC IN-TUBE DEVICES
Herrero-Martín, Ruth	OPTIMIZING HEAT TRANSFER EFFICIENCY: EXPERIMENTAL ANALYSIS OF WIRE-COIL INSERTS IN RECTANGULAR TUBES UNDER NON-UNIFORM HEAT FLUX CONDITIONS
Hewakandandamby, Buddhika	EFFECT OF VISCOSITY ON VOID FRACTION OF A GAS-LIQUID FLOW IN VERTICAL PIPE
Hordley, Tim	HEAT CONDUCTIVITY FOR THE ALUMINIUM SCRAP IN A DE-COATING FURNACE
Horgue, Pierre	On the numerical prediction of the evaporation rate of a horizontal water span
Hu, Pengfei	Study on heterogeneous condensing flow characteristics in turbine cascade
Huang, Xiaoxue	THERMAL HYDRAULIC SAFETY CONSIDERATIONS, METHODS AND RESEARCH FOR HIGH-TEMPREATURE GAS-COOLED REACTORS (HTGRs)
Hughes, Matthew	Heat Pumps: The solution to many of humankind’s essential challenges
Huyett, Joe	PERFORMANCE OF AN AMBIENT-TEMPERATURE-SOURCE STEAM-GENERATING HEAT PUMP
I
Iacovides, Hector	Investigating RANS Predictions for Heat and Mass Transfer in Turbulent Flow Across a Backward-Facing Step STUDY OF NATURAL CONVECTION OVER VERTICAL AND INCLINED FIN ARRAYS FULLY-RESOLVED INTERFACE CAPTURING SIMULATIONS OF SINGLE BUBBLE GROWTH AND MICROLAYER FORMATION ON AN ISOTHERMAL SUPERHEATED SURFACE IN POOL BOILING CONDITIONS Effect of Partial Heating on Natural Convection in a Cubical Cavity with an Internal Obstacle: A URANS Study URANS STUDY OF THERMAL TRANSIENTS IN A T-JUNCTION PIPE Modelling Sprays of Liquids into Gases and Vapours CFD Modelling of Lead Solidification and Natural Convection for the Westinghouse Lead-cooled Fast Reactor Conjugate Heat Transfer Analysis of Floating Photovoltaic Panels with Hybrid Natural Convection Cooling Loops and Solar Filter
Ignatowicz, Monika	THERMAL PERFORMANCE EVALUATION OF LITHIUM POLYMER BATTERIES: A COMPARISON OF PCM AND PCM WITH METAL FOAMS, FOR THERMAL REGULATION
Imran, Muhammad	MATERIAL-LEVEL EXPERIMENTAL EVALUATION OF SOIL-BASED THERMAL ENERGY STORAGE FOR SOLAR-POWERED ADSORPTION REFRIGERATION SYSTEM HEAT CONDUCTIVITY FOR THE ALUMINIUM SCRAP IN A DE-COATING FURNACE
Ineson, Jake	DNS of Magnetohydrodynamic Rayleigh-Bénard Convection with Applications in Fusion Thermal Hydraulics
Ishiyama, Edward	Navigating the challenges: Optimizing fired heaters with air preheaters
Islam, Md Amirul	Pressurized CO2 activation of waste jute stick for enhanced CO2 capture applications
Ivanov, Atanas	A NOVEL FEED-FORWARD NEURAL NETWORK FOR FLOW BOILING PATTERN PREDICTION
Ivanov, Atanas	SINGLE-PHASE PRESSURE DROP AND HEAT TRANSFER IN MICRO-PIN FIN HEAT EXCHANGERS
Izaharuddin, Ainul	HEAT CONDUCTIVITY FOR THE ALUMINIUM SCRAP IN A DE-COATING FURNACE
J
Jadidi, Mohammad	Heat Transfer simulation in encapsulated phase change materials for high-temperature energy storage application Embedded large eddy simulation of partially premixed hydrogen flame: Study of injector nozzle geometry
Jakubowski, Tomasz	OPTIMIZATION OF UV-C RADIATOR TO ENHANCE MECHANICAL PROPERTIES OF IRRADIATED SEMI-FINISHED POTATO TUBER FOR EXTENDED STORAGE PERIOD
Jalili, Darioush	Study of Boiling Heat Transfer and Two-Phase Flows using Physics-Informed Neural Networks
Jamil, Muhammad Ahmad	Multi-objective robust operation-optimization of gas turbine system installed in industrial combined cycle gas power plant
Jang, Seohee	HEAT TRANSFER MODELLING OF GRANULAR FLOW IN POROUS MEDIA
Jangi, Mehdi	Using CFD to Improve the Heat Transfer Performance of an Oil Spray cooling System for an Electric Motor by varying the Inclination Angle
Jardine, Amy	Modelling Sprays of Liquids into Gases and Vapours
Jembere, Addis	OPTIMIZATION OF UV-C RADIATOR TO ENHANCE MECHANICAL PROPERTIES OF IRRADIATED SEMI-FINISHED POTATO TUBER FOR EXTENDED STORAGE PERIOD
K
K, Venkatasubbaiah	EFFECT OF ASPECT RATIO ON NATURAL CONVECTION HEAT TRANSFER INSIDE ENCLOSURE WITH NANOFLUIDS USING TWO-PHASE EULERIAN-EULERIAN MODEL
Kabi, Prasenjit	INVESTIGATING COLLOIDAL STABILITY OF NANO-ENHANCED PHASE CHANGE MATERIAL UNDER THERMAL CYCLING MORPHOLOGICAL TRANSITIONS IN FROZEN COLLOIDAL DROPLETS
Karayiannis, Tassos	A NOVEL FEED-FORWARD NEURAL NETWORK FOR FLOW BOILING PATTERN PREDICTION A MACHINE LEARNING APPROACH FOR THE PREDICTION OF FLOW BOILING HEAT TRANSFER COEFFICIENTS IN SMALL TO MICRO-TUBES PERFORMANCE OF HDPE AND VACUUM-INSULATED CENTRAL PIPES FOR COAXIAL HEAT EXHANGERS IN GEOTHERMAL SYSTEMS SINGLE-PHASE PRESSURE DROP AND HEAT TRANSFER IN MICRO-PIN FIN HEAT EXCHANGERS
Katsamis, Constantinos	Effect of Partial Heating on Natural Convection in a Cubical Cavity with an Internal Obstacle: A URANS Study
Kavyan, Minto	URANS STUDY OF THERMAL TRANSIENTS IN A T-JUNCTION PIPE
Kazilas, Mihalis	Optimising Thermal Performance: A Novel Approach to Battery Cooling in Electric and Hybrid Vehicles
Kemp, Richard	ANALYSIS OF HEAT EXCHANGER MODELS UNDER DRY, WET, AND FROST CONDITIONS FOR THE EVAPORATORS OF HEAT PUMPS
Kennedy, James	Navigating the challenges: Optimizing fired heaters with air preheaters
Keshmiri, Amir	Numerical Simulation of Hydrogen Absorption in Metal Hydride with Internal Fin and Embedded Heat Transfer Fluid Channel
Keshmiri, Amir	Study of Boiling Heat Transfer and Two-Phase Flows using Physics-Informed Neural Networks
Khaleel, Faysal	EFFECT OF INTERFACIAL FORCE ON FLOW BEHAVIOR AND LIQUID FILM THICKNESS IN THREE-PHASE TAYLOR FLOW Numerical Modelling of Multi-Phase Taylor Flow with Nanoparticles using MPPIC-VOF approach for Heat Transfer Enhancement
Khalil Youssef, Giorgio	ADVANCEMENTS IN EXPERIMENTAL INFRASTRUCTURE FOR LEAD FAST REACTOR RESEARCH: THE VLF AND PHRF FACILITIES
Khan, Ruqaiyah	DEVELOPMENT OF SILICONE POLYMER COMPOSITES WITH HYBRID BN AND SIC FILLERS FOR IMPROVED THERMAL CONDUCTIVITY
Khodabandeh, Rahmatollah	THERMAL PERFORMANCE EVALUATION OF LITHIUM POLYMER BATTERIES: A COMPARISON OF PCM AND PCM WITH METAL FOAMS, FOR THERMAL REGULATION
Kisha, Wigdan	EFFECT OF VISCOSITY ON VOID FRACTION OF A GAS-LIQUID FLOW IN VERTICAL PIPE
Kita, Yutaku	Probing Hydrodynamic and Thermal Behaviour of Volatile Drops Impacting Hot Surfaces Near the Leidenfrost Point
Klein, Sikke	OPTIMIZATION OF A TRANS- CRITICAL HEAT PUMP CYCLE USING A MIXTURE OF PROPANE AND BUTANE INTEGRATED WITH AN INDUSTRIAL DRYER
Kocher, Jordan	NUMERICAL MODEL AND DEMONSTRATION OF A THERMAL BRINE CONCENTRATOR FOR CLEAN WATER PRODUCTION
Koneti, Leelasagar	EFFECT OF ASPECT RATIO ON NATURAL CONVECTION HEAT TRANSFER INSIDE ENCLOSURE WITH NANOFLUIDS USING TWO-PHASE EULERIAN-EULERIAN MODEL
Kothadia, Hardik	EVAPORATION IN THIN WATER FILM UNDER REDUCED PRESSURE CONDITIONS: HEAT AND MASS TRANSFER CHARACTERISTICS A NON-DIMENSIONAL HEAT TRANSFER ANALYSIS OF PCM SOLIDIFICATION
Koşar, Ali	EXPERIMENTAL STUDIES ON TWO-PHASE HFE-7000 FOR BATTERY THERMAL MANAGEMENT
Kubacka, Jan	PERFORMANCE OF HDPE AND VACUUM-INSULATED CENTRAL PIPES FOR COAXIAL HEAT EXHANGERS IN GEOTHERMAL SYSTEMS
Kubo, Wakana	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Kumar, Alok	UNDERSTANDING BUBBLE GROWTH MECHANISM(S) OF HIGH VOLATILE FLUID USING ADVANCED GRAIDENTS-BASED DIAGNOSTICS
L
La Rocca, Antonino	THERMAL MANAGEMENT CHALLENGES OF LI-ION BATTERY PACKS USING PARTIAL IMMERSION COOLING: ANALYZING PRESSURE DROP AND TEMPERATURE DISTRIBUTION CONJUGATE HEAT TRANSFER ANALYSIS OF A POUCH CELL LI-ION BATTERY PACK USING MINI CHANNEL COLD PLATES WITH A U-SHAPED CONFIGURATION
Lamballais, Eric	NUMERICAL INVESTIGATION OF THE MAINLY AXIAL FLOW IN MIXED CONVECTION REGIME WITHIN TUBE BUNDLES
Lanbaran, Davoud	Harnessing Microwave and Heat Exchanger for Enhanced Hydrogen Desorption in MgH2 Hydride Storage System
Laurence, Dominique	Investigating RANS Predictions for Heat and Mass Transfer in Turbulent Flow Across a Backward-Facing Step
Law, Richard	ENHANCING HEAT TRANSFER IN MICRO PIN FIN HEAT SINKS USING FLOW OSCILLATIONS MANUFACTURING OF A COST-EFFECTIVE FLAT COPPER WATER LOOP HEAT PIPE
Layton, James	A NOVEL MULTISCALE THERMAL METHODOLOGY FOR APPLICATION IN AEROSPACE TRANSMISSION SYSTEMS
Le Coupanec, Erwan	NUMERICAL INVESTIGATION OF THE MAINLY AXIAL FLOW IN MIXED CONVECTION REGIME WITHIN TUBE BUNDLES
Lee, Dae Yeob	Numerical Simulation of Hydrogen Absorption in Metal Hydride with Internal Fin and Embedded Heat Transfer Fluid Channel
Lee, Sung Jin	CFD Modelling of Lead Solidification and Natural Convection for the Westinghouse Lead-cooled Fast Reactor
Lenahan, Matt	A Simple Transient Approach to Measuring Thermal Contact Conductance at Low Contact Pressures
Lewis, Stuart	Optimising Thermal Performance: A Novel Approach to Battery Cooling in Electric and Hybrid Vehicles
Li, Bo	Distributed Fibre Optic Sensors for Solid-Liquid Phase Change Detection in Thermal Energy Storage Applications Harnessing Microwave and Heat Exchanger for Enhanced Hydrogen Desorption in MgH2 Hydride Storage System DEVELOPMENT OF SILICONE POLYMER COMPOSITES WITH HYBRID BN AND SIC FILLERS FOR IMPROVED THERMAL CONDUCTIVITY
Li, Hengyang	Embedded large eddy simulation of partially premixed hydrogen flame: Study of injector nozzle geometry
Li, Yongliang	A NON-DIMENSIONAL HEAT TRANSFER ANALYSIS OF PCM SOLIDIFICATION
Liao, J.	ADVANCEMENTS IN EXPERIMENTAL INFRASTRUCTURE FOR LEAD FAST REACTOR RESEARCH: THE VLF AND PHRF FACILITIES
Lienhard, John	SYMMETRY CRITERIA FOR THE EQUALITY OF INTERIOR AND EXTERIOR HEAT CONDUCTION SHAPE FACTORS
Lim, Yeow Kheng	THERMAL METAMATERIALS FOR COOLING FLEXIBLE POLYMER SUBSTRATE ELECTRONICS
Lin, Chao-An	NATURAL CONVECTION OF DIFFERENTIAL HEATED CAVITY WITH POLYMER ADDITIVES
Liu, Bo	Development of a Coarse-grid Methodology for Heat Transfer Calculations in Prismatic HTGR Fuel Assemblies
Liu, Jionghui	BUBBLE COALESCENCE DURING NUCLEATE BOILING OF BINARY MIXTURES FROM ARTIFICIAL CAVITIES
Liu, Meixi	Numerical analysis of a thermal energy storage system with phase change material based on plate heat exchanger with roll-bond design
Locke, Jake	EVALUATION OF AMMONIA-SALT MIXTURE REACTIONS
Lockyear, Kristian	RADIO FREQUENCY CALCINATION OF GYPSUM FOR SUSTAINABLE WALLBOARD PRODUCTION
Loh, Joel Yi Yang	THERMAL METAMATERIALS FOR COOLING FLEXIBLE POLYMER SUBSTRATE ELECTRONICS
Lopez, Elena	Latest improvements in additively manufactured aerospike rocket engine
Lorenzini, Marco	Steady-state Modelling of Heat Exchangers for Refrigeration Applications
Lottis, Marian	Influence of external process fluid injection on the conveying behaviour of screw pumps with decreasing spindle pitch
Lowe, Rachael C.	EXTENDED HEAT TRANSFER MODEL OF A JACKETED BATCH STIRRED TANK REACTOR
Luke, Andrea	Influence of external process fluid injection on the conveying behaviour of screw pumps with decreasing spindle pitch
M
Macpherson, G.	ADVANCEMENTS IN EXPERIMENTAL INFRASTRUCTURE FOR LEAD FAST REACTOR RESEARCH: THE VLF AND PHRF FACILITIES Direct numerical simulations of forced and mixed convection flows in a reactor vessel auxiliary cooling system (RVACS)
Maddumage, Waruna	NUMERICAL STUDY OF OIL JET COOLING FOR HAIRPIN WINDING MOTORS IN ELECTRIC VEHICLES
Magit, Keziah	EFFECT OF VISCOSITY ON VOID FRACTION OF A GAS-LIQUID FLOW IN VERTICAL PIPE
Magnini, Mirco	A COUPLED MOLECULAR-CONTINUUM FRAMEWORK FOR MULTISCALE SIMULATIONS OF BOILING
Mahmood, Ahmed	Multi-Objective Optimization of the Thermal Management of Electric Vehicle Using Cold Plate Technology
Mahmoud, Mohamed	SINGLE-PHASE PRESSURE DROP AND HEAT TRANSFER IN MICRO-PIN FIN HEAT EXCHANGERS
Mahmoud, Saad	Integrated Two-Phase Immersion Cooling of Electric Vehicle Batteries with Organic Rankine Cycle
Mahmoudi, Yasser	HEAT TRANSFER MODELLING OF GRANULAR FLOW IN POROUS MEDIA Study of Boiling Heat Transfer and Two-Phase Flows using Physics-Informed Neural Networks Numerical Simulation of Hydrogen Absorption in Metal Hydride with Internal Fin and Embedded Heat Transfer Fluid Channel Heat Transfer simulation in encapsulated phase change materials for high-temperature energy storage application Embedded large eddy simulation of partially premixed hydrogen flame: Study of injector nozzle geometry
Mahmud, Tariq	ACOUSTIC ENHANCEMENT OF MALTODEXTRIN DROPLET DRYING: INSIGHTS FROM MODELLING AND EXPERIMENTAL OBSERVATIONS EXTENDED HEAT TRANSFER MODEL OF A JACKETED BATCH STIRRED TANK REACTOR
Mamtaz, Tayyab	MANUFACTURING OF A COST-EFFECTIVE FLAT COPPER WATER LOOP HEAT PIPE
Manca, Oronzio	THERMAL PERFORMANCE EVALUATION OF LITHIUM POLYMER BATTERIES: A COMPARISON OF PCM AND PCM WITH METAL FOAMS, FOR THERMAL REGULATION
Mancin, Simone	Additive Manufacturing for Thermal Management applications: advantages and current limitations
Mandal, Priya	INVESTIGATING COLLOIDAL STABILITY OF NANO-ENHANCED PHASE CHANGE MATERIAL UNDER THERMAL CYCLING
Marengo, Marco	TOWARDS THE IMPLEMENTATION OF LOOP HEAT PIPES IN AUTOMOTIVE BATTERY THERMAL MANAGEMENT SYSTEMS FLEXIBLE POLYMERIC PULSATING HEAT PIPES: FABRICATION TECHNIQUES AND THERMAL PERFORMANCE INVESTIGATION
Marshall, Deacon	VALIDATION OF UNSTEADY RANS AGAINST LES CALCULATIONS FOR PREDICTING NATURAL CIRCULATION STALL PHENOMENA WITHIN A TEST FACILITY LOOP
McDonough, Jonathan	ENHANCING HEAT TRANSFER IN MICRO PIN FIN HEAT SINKS USING FLOW OSCILLATIONS
Mcglen, Ryan	MANUFACTURING OF A COST-EFFECTIVE FLAT COPPER WATER LOOP HEAT PIPE
McHale, Glen	CONTROLLING DROPLET SIZE DENSITY DURING DROPWISE CONDENSATION ON SILICONE OIL GRAFTED SURFACES
McKee, Kyle	SYMMETRY CRITERIA FOR THE EQUALITY OF INTERIOR AND EXTERIOR HEAT CONDUCTION SHAPE FACTORS
Medina, Humberto	A NOVEL MULTISCALE THERMAL METHODOLOGY FOR APPLICATION IN AEROSPACE TRANSMISSION SYSTEMS
Mehta, Neha	EVALUATING THE GREENHOUSE GAS EMISSIONS REDUCTION POTENTIAL DUE TO THE USE OF HEAT PUMPS
Melchiorri, Lorenzo	Computational magnetohydrodynamics codes for the development of liquid metal breeding blankets in magnetic fusion reactors
Menon, Akanksha	NUMERICAL MODEL AND DEMONSTRATION OF A THERMAL BRINE CONCENTRATOR FOR CLEAN WATER PRODUCTION
Merzari, Elia	Direct numerical simulations of forced and mixed convection flows in a reactor vessel auxiliary cooling system (RVACS)
Metcalf, Steven	EVALUATION OF AMMONIA-SALT MIXTURE REACTIONS
Meyer, Josua	THE ROLE OF BUBBLE DYNAMICS IN THE ENHANCEMENT OF FALLING FILM REFRIGERANT BOILING
Miché, Nicolas	TOWARDS THE IMPLEMENTATION OF LOOP HEAT PIPES IN AUTOMOTIVE BATTERY THERMAL MANAGEMENT SYSTEMS FLEXIBLE POLYMERIC PULSATING HEAT PIPES: FABRICATION TECHNIQUES AND THERMAL PERFORMANCE INVESTIGATION
Mihajlovic, Milan	A NUMERICAL STUDY OF THE IMPACT OF BEND CURVATURES TO FLOW PATTERNS IN NATURAL CONVECTION LOOPS
Milkie, Jeffrey	PERFORMANCE OF AN AMBIENT-TEMPERATURE-SOURCE STEAM-GENERATING HEAT PUMP
Mohd Rosdan, Faridatul Ain	ACOUSTIC ENHANCEMENT OF MALTODEXTRIN DROPLET DRYING: INSIGHTS FROM MODELLING AND EXPERIMENTAL OBSERVATIONS
Molinaroli, Luca	Heat Pumps: Enablers of Decarbonization - Assessment of the use of artificial neural networks to detect and diagnose some soft faults in heat pumps Steady-state Modelling of Heat Exchangers for Refrigeration Applications
Morente, Antoine	SCOPING ANALYSES FOR THE DEFINITION OF NEW EXPERIMENTS FOR NATURAL CONVECTION AT HIGH RAYLEIGH NUMBERS.
Moulinec, Charles	Development of a Coarse-grid Methodology for Heat Transfer Calculations in Prismatic HTGR Fuel Assemblies
Muhammad, Akhtar	Multi-objective robust operation-optimization of gas turbine system installed in industrial combined cycle gas power plant
Muhammad F.B., Raihan	Multi-Objective Optimization of the Thermal Management of Electric Vehicle Using Cold Plate Technology
N
Nasser, Adel	STUDY OF NATURAL CONVECTION OVER VERTICAL AND INCLINED FIN ARRAYS Conjugate Heat Transfer Analysis of Floating Photovoltaic Panels with Hybrid Natural Convection Cooling Loops and Solar Filter
Naveira-Cotta, Carolina Palma	RECENT PROGRESSES ON FUNDAMENTALS AND APPLICATIONS OF COMPUTATIONAL-ANALYTICAL INTEGRAL TRANSFORMS
Nazemzadeh, Nima	A MACHINE LEARNING APPROACH FOR THE PREDICTION OF FLOW BOILING HEAT TRANSFER COEFFICIENTS IN SMALL TO MICRO-TUBES
Nicusan, Andrei-Leonard	ENHANCEMENT FOR LAMINAR FLOW USING STATIC IN-TUBE DEVICES
Niedermeier, Klarissa	LOW-PRANDTL NUMBER HEAT TRANSFER FLUIDS IN PACKED-BED HEAT STORAGE
O
Oakley, David	Navigating the challenges: Optimizing fired heaters with air preheaters
Obst, Oliver	Influence of external process fluid injection on the conveying behaviour of screw pumps with decreasing spindle pitch
Odukomaiya, Adewale	PERFORMANCE OF AN AMBIENT-TEMPERATURE-SOURCE STEAM-GENERATING HEAT PUMP
Omer, Siddig	Application of PCM in External Walls of Typical Residential Buildings in the UK and Their Impact on Building Energy Consumption
Orejon, Dani	BUBBLE COALESCENCE DURING NUCLEATE BOILING OF BINARY MIXTURES FROM ARTIFICIAL CAVITIES CONTROLLING DROPLET SIZE DENSITY DURING DROPWISE CONDENSATION ON SILICONE OIL GRAFTED SURFACES FLOW BEHAVIOUR AND WALL TEMPERATURE DISTRIBUTION OF LOW CONCENTRATION BUTANOL-WATER MIXTURE FLOW BOILING UNDER DIFFERENT FLOW ORIENTATION
Osley, William	ENHANCEMENT FOR LAMINAR FLOW USING STATIC IN-TUBE DEVICES
Owen, Andrew	A Simple Transient Approach to Measuring Thermal Contact Conductance at Low Contact Pressures
P
Pacino, Andrea	THERMAL MANAGEMENT CHALLENGES OF LI-ION BATTERY PACKS USING PARTIAL IMMERSION COOLING: ANALYZING PRESSURE DROP AND TEMPERATURE DISTRIBUTION
Paladino, Domenico	SCOPING ANALYSES FOR THE DEFINITION OF NEW EXPERIMENTS FOR NATURAL CONVECTION AT HIGH RAYLEIGH NUMBERS.
Parker, Walter	NUMERICAL MODEL AND DEMONSTRATION OF A THERMAL BRINE CONCENTRATOR FOR CLEAN WATER PRODUCTION
Patil, Parag	PREDICTION OF FOULING BY CALCIUM PHOSPHATE IN A COOLING WATER SYSTEM USING MACHINE LEARNING
Paykani, Amin	NUMERICAL STUDY OF OIL JET COOLING FOR HAIRPIN WINDING MOTORS IN ELECTRIC VEHICLES
Pecnik, Rene	OPTIMIZATION OF A TRANS- CRITICAL HEAT PUMP CYCLE USING A MIXTURE OF PROPANE AND BUTANE INTEGRATED WITH AN INDUSTRIAL DRYER
Peeters, Jurriaan	OPTIMIZATION OF A TRANS- CRITICAL HEAT PUMP CYCLE USING A MIXTURE OF PROPANE AND BUTANE INTEGRATED WITH AN INDUSTRIAL DRYER
Pepato, Adriano	Additive Manufacturing for Thermal Management applications: advantages and current limitations
Pickert, Volker	Analytical model and comparative fluid analysis tool for screen and sinter wick heat pipes
Pignatiello, Sonia	Computational magnetohydrodynamics codes for the development of liquid metal breeding blankets in magnetic fusion reactors
Pintsuk, Gerald	QUALIFICATION AND TESTING OF MATERIALS AND COMPONENTS FOR APPLICATIONS IN FUSION
Pitt, Stephen	ENHANCEMENT FOR LAMINAR FLOW USING STATIC IN-TUBE DEVICES
Prentice, Giles	DIRECT THERMAL MANAGEMENT FOR LITHIUM ION BATTERIES
Pringle, Gavin	A COUPLED MOLECULAR-CONTINUUM FRAMEWORK FOR MULTISCALE SIMULATIONS OF BOILING
Pugh, Simon	Navigating the challenges: Optimizing fired heaters with air preheaters
R
Radcliffe, Jonathan	EVALUATING THE GREENHOUSE GAS EMISSIONS REDUCTION POTENTIAL DUE TO THE USE OF HEAT PUMPS
Rahman, Md Abdur	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Rezk, Ahmed	Novel Composite Adsorbents to Enhance Heat and Mass Transfer in Adsorption Cooling and Desalination Systems MATERIAL-LEVEL EXPERIMENTAL EVALUATION OF SOIL-BASED THERMAL ENERGY STORAGE FOR SOLAR-POWERED ADSORPTION REFRIGERATION SYSTEM HEAT CONDUCTIVITY FOR THE ALUMINIUM SCRAP IN A DE-COATING FURNACE
Roberti, Giovanni	Steady-state Modelling of Heat Exchangers for Refrigeration Applications
Roberts, Nickolas	PERFORMANCE OF AN AMBIENT-TEMPERATURE-SOURCE STEAM-GENERATING HEAT PUMP
Rolfo, Stefano	Development of a Coarse-grid Methodology for Heat Transfer Calculations in Prismatic HTGR Fuel Assemblies
Rose, John	CONDENSATION ON A VERTICAL PLATE WITH SINUSOIDAL MICROFINS – FURTHER CONSIDERATIONS
Rotach, Pauline	SCOPING ANALYSES FOR THE DEFINITION OF NEW EXPERIMENTS FOR NATURAL CONVECTION AT HIGH RAYLEIGH NUMBERS.
Rothwell, Benjamin	A NOVEL MULTISCALE THERMAL METHODOLOGY FOR APPLICATION IN AEROSPACE TRANSMISSION SYSTEMS
Royer, Quentin	On the numerical prediction of the evaporation rate of a horizontal water span
Rupam, Tahmid Hasan	Pressurized CO2 activation of waste jute stick for enhanced CO2 capture applications
Ryan, Kelly P.	PERFORMANCE OF AN AMBIENT-TEMPERATURE-SOURCE STEAM-GENERATING HEAT PUMP
S
Sadaghiani, Ali	EXPERIMENTAL STUDIES ON TWO-PHASE HFE-7000 FOR BATTERY THERMAL MANAGEMENT
Saha, Bidyut	Pressurized CO2 activation of waste jute stick for enhanced CO2 capture applications
Samarasinghe, Thamasha	Optimising Thermal Performance: A Novel Approach to Battery Cooling in Electric and Hybrid Vehicles
Santori, Giulio	Dynamic Analysis of Adsorption Heat Transformation: A Dimensionless Model Approach for Comparative Evaluation of Sorption Bed Designs
Sargent, Michael	DIRECT THERMAL MANAGEMENT FOR LITHIUM ION BATTERIES
Saxena, Ashish	Analysis of thermal stratification in a liquid sodium test facility
Schmidt, Eike Alexander	LOW-PRANDTL NUMBER HEAT TRANSFER FLUIDS IN PACKED-BED HEAT STORAGE
Sciacovelli, Adriano	ENHANCEMENT FOR LAMINAR FLOW USING STATIC IN-TUBE DEVICES DYNAMIC MODELLING OF LATENT HEAT THERMAL ENERGY STORAGE UNITS BASED ON PLATE-TYPE HEAT EXCHANGERS Numerical analysis of a thermal energy storage system with phase change material based on plate heat exchanger with roll-bond design
Sefiane, Khellil	BUBBLE COALESCENCE DURING NUCLEATE BOILING OF BINARY MIXTURES FROM ARTIFICIAL CAVITIES CONTROLLING DROPLET SIZE DENSITY DURING DROPWISE CONDENSATION ON SILICONE OIL GRAFTED SURFACES FLOW BEHAVIOUR AND WALL TEMPERATURE DISTRIBUTION OF LOW CONCENTRATION BUTANOL-WATER MIXTURE FLOW BOILING UNDER DIFFERENT FLOW ORIENTATION
Selbmann, Alex	Latest improvements in additively manufactured aerospike rocket engine
Sen, Surojit	THERMAL MANAGEMENT CHALLENGES OF LI-ION BATTERY PACKS USING PARTIAL IMMERSION COOLING: ANALYZING PRESSURE DROP AND TEMPERATURE DISTRIBUTION CONJUGATE HEAT TRANSFER ANALYSIS OF A POUCH CELL LI-ION BATTERY PACK USING MINI CHANNEL COLD PLATES WITH A U-SHAPED CONFIGURATION
Setiya, Meha	PERFORMANCE OF AN AMBIENT-TEMPERATURE-SOURCE STEAM-GENERATING HEAT PUMP
Seville, Jonathan	ENHANCEMENT FOR LAMINAR FLOW USING STATIC IN-TUBE DEVICES
Shahzad, Muhammad Wakil	Multi-objective robust operation-optimization of gas turbine system installed in industrial combined cycle gas power plant
Sharma, Amrita	A NON-DIMENSIONAL HEAT TRANSFER ANALYSIS OF PCM SOLIDIFICATION
Shateri, Amirali	EXPLORING THE POTENTIAL OF MACHINE LEARNING IN COMBUSTION ENGINE OPTIMIZATION
Shaver, Dillon	Direct numerical simulations of forced and mixed convection flows in a reactor vessel auxiliary cooling system (RVACS)
Shearing, Paul	A NUMERICAL INVESTIGATION ON THERMAL MANAGEMENT SYSTEM DESIGN FOR 4680 CYLINDRICAL LITHIUM-ION BATTERIES
Sheikh, Hamzah	ENHANCEMENT FOR LAMINAR FLOW USING STATIC IN-TUBE DEVICES
Shire, George	EVALUATION OF AMMONIA-SALT MIXTURE REACTIONS
Siah, Chun Fei	THERMAL METAMATERIALS FOR COOLING FLEXIBLE POLYMER SUBSTRATE ELECTRONICS
Simpson, Robert	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Singh, Sarvjeet	EVAPORATION IN THIN WATER FILM UNDER REDUCED PRESSURE CONDITIONS: HEAT AND MASS TRANSFER CHARACTERISTICS
Singh, Shobhana	A NON-DIMENSIONAL HEAT TRANSFER ANALYSIS OF PCM SOLIDIFICATION
Singh, Vikramjeet	FUNCTIONALIZED COVALENT ORGANIC FRAMEWORKS FOR ICE NUCLEATION INHIBITION
Siriano, Simone	Computational magnetohydrodynamics codes for the development of liquid metal breeding blankets in magnetic fusion reactors
Skillen, Alex	URANS STUDY OF THERMAL TRANSIENTS IN A T-JUNCTION PIPE Numerical Modelling of Condensation Phenomena for Subcooled Flow Boiling Applications DNS of Magnetohydrodynamic Rayleigh-Bénard Convection with Applications in Fusion Thermal Hydraulics VALIDATION OF UNSTEADY RANS AGAINST LES CALCULATIONS FOR PREDICTING NATURAL CIRCULATION STALL PHENOMENA WITHIN A TEST FACILITY LOOP
Slaviero, Gianluca	Additive Manufacturing for Thermal Management applications: advantages and current limitations
Smith, Edward	A COUPLED MOLECULAR-CONTINUUM FRAMEWORK FOR MULTISCALE SIMULATIONS OF BOILING
Spallina, Vincenzo	Numerical Simulation of Hydrogen Absorption in Metal Hydride with Internal Fin and Embedded Heat Transfer Fluid Channel
Srivastava, Atul	UNDERSTANDING BUBBLE GROWTH MECHANISM(S) OF HIGH VOLATILE FLUID USING ADVANCED GRAIDENTS-BASED DIAGNOSTICS
Stafford, Jason	EFFECT OF INTERFACIAL FORCE ON FLOW BEHAVIOR AND LIQUID FILM THICKNESS IN THREE-PHASE TAYLOR FLOW Numerical Modelling of Multi-Phase Taylor Flow with Nanoparticles using MPPIC-VOF approach for Heat Transfer Enhancement
Stansbury, C.	ADVANCEMENTS IN EXPERIMENTAL INFRASTRUCTURE FOR LEAD FAST REACTOR RESEARCH: THE VLF AND PHRF FACILITIES
Stepien, Lukas	Latest improvements in additively manufactured aerospike rocket engine
Stieven, Gianfranco de Mello	RECENT PROGRESSES ON FUNDAMENTALS AND APPLICATIONS OF COMPUTATIONAL-ANALYTICAL INTEGRAL TRANSFORMS
Stojceska, Valentina	Experimental validation of two numerical models of a solar-powered multiple air jets impingement tube heater
Su, Huachen	IMPROVED PERFORMANCE OF DROPLET-BASED ELECTRICITY GENERATORS USING SPECIALLY SHAPED SUBSTRATES
Sun, Zeyu	A NUMERICAL INVESTIGATION ON THERMAL MANAGEMENT SYSTEM DESIGN FOR 4680 CYLINDRICAL LITHIUM-ION BATTERIES
Sutanto, Bayu	Conjugate Heat Transfer Analysis of Floating Photovoltaic Panels with Hybrid Natural Convection Cooling Loops and Solar Filter
Swadling, Adam	On the numerical prediction of the evaporation rate of a horizontal water span
T
Talebizadehsardari, Pouyan	THERMAL MANAGEMENT CHALLENGES OF LI-ION BATTERY PACKS USING PARTIAL IMMERSION COOLING: ANALYZING PRESSURE DROP AND TEMPERATURE DISTRIBUTION CONJUGATE HEAT TRANSFER ANALYSIS OF A POUCH CELL LI-ION BATTERY PACK USING MINI CHANNEL COLD PLATES WITH A U-SHAPED CONFIGURATION
Tannous, Hadi	Experimental validation of two numerical models of a solar-powered multiple air jets impingement tube heater
Taskin, Anil	Using CFD to Improve the Heat Transfer Performance of an Oil Spray cooling System for an Electric Motor by varying the Inclination Angle
Taskin, Anil	Integrated Two-Phase Immersion Cooling of Electric Vehicle Batteries with Organic Rankine Cycle
Tassone, Alessandro	Computational magnetohydrodynamics codes for the development of liquid metal breeding blankets in magnetic fusion reactors
Tassou, Savvas	Experimental validation of two numerical models of a solar-powered multiple air jets impingement tube heater
Tatli, Emre	CFD Modelling of Lead Solidification and Natural Convection for the Westinghouse Lead-cooled Fast Reactor
Thome, John	THE ROLE OF BUBBLE DYNAMICS IN THE ENHANCEMENT OF FALLING FILM REFRIGERANT BOILING
Thompson, Harvey	Multi-Objective Optimization of the Thermal Management of Electric Vehicle Using Cold Plate Technology
Tirapelle, Monica	PREDICTION OF FOULING BY CALCIUM PHOSPHATE IN A COOLING WATER SYSTEM USING MACHINE LEARNING
Tiwari, Manish	INVESTIGATING COLLOIDAL STABILITY OF NANO-ENHANCED PHASE CHANGE MATERIAL UNDER THERMAL CYCLING MORPHOLOGICAL TRANSITIONS IN FROZEN COLLOIDAL DROPLETS FUNCTIONALIZED COVALENT ORGANIC FRAMEWORKS FOR ICE NUCLEATION INHIBITION
Tjards, Jacob	RADIO FREQUENCY CALCINATION OF GYPSUM FOR SUSTAINABLE WALLBOARD PRODUCTION
Tola, Yetenayet Bekele	MATERIAL-LEVEL EXPERIMENTAL EVALUATION OF SOIL-BASED THERMAL ENERGY STORAGE FOR SOLAR-POWERED ADSORPTION REFRIGERATION SYSTEM
Touzani, Sara	The Effect of The Temperature Gradient on The Thermocapillary Droplet Flow in a Vibrating Fluid Inside a Rotating Cylinder
Tunstall, Ryan	Numerical Modelling of Condensation Phenomena for Subcooled Flow Boiling Applications VALIDATION OF UNSTEADY RANS AGAINST LES CALCULATIONS FOR PREDICTING NATURAL CIRCULATION STALL PHENOMENA WITHIN A TEST FACILITY LOOP
Turner, Mark	DIRECT THERMAL MANAGEMENT FOR LITHIUM ION BATTERIES
U
Uddin, Ghulam Moeen	Multi-objective robust operation-optimization of gas turbine system installed in industrial combined cycle gas power plant
Uribe, Juan	SCOPING ANALYSES FOR THE DEFINITION OF NEW EXPERIMENTS FOR NATURAL CONVECTION AT HIGH RAYLEIGH NUMBERS.
V
Vacher, Jean-Luc	SCOPING ANALYSES FOR THE DEFINITION OF NEW EXPERIMENTS FOR NATURAL CONVECTION AT HIGH RAYLEIGH NUMBERS.
van Wijhe, Andries	ANALYSIS OF HEAT EXCHANGER MODELS UNDER DRY, WET, AND FROST CONDITIONS FOR THE EVAPORATORS OF HEAT PUMPS
Venter, Mandi	FLOW BEHAVIOUR AND WALL TEMPERATURE DISTRIBUTION OF LOW CONCENTRATION BUTANOL-WATER MIXTURE FLOW BOILING UNDER DIFFERENT FLOW ORIENTATION
Vicente Cruz, Rodrigo	NUMERICAL INVESTIGATION OF THE MAINLY AXIAL FLOW IN MIXED CONVECTION REGIME WITHIN TUBE BUNDLES
Voss, Jochen	Multi-Objective Optimization of the Thermal Management of Electric Vehicle Using Cold Plate Technology
W
Wang, Chao	Distributed Fibre Optic Sensors for Solid-Liquid Phase Change Detection in Thermal Energy Storage Applications
Wang, Fang	A NOVEL FEED-FORWARD NEURAL NETWORK FOR FLOW BOILING PATTERN PREDICTION
Wang, Han	Heat Transfer simulation in encapsulated phase change materials for high-temperature energy storage application
Wang, Qi Jie	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Ward, Keeran	EXTENDED HEAT TRANSFER MODEL OF A JACKETED BATCH STIRRED TANK REACTOR
Watkins, R.	ADVANCEMENTS IN EXPERIMENTAL INFRASTRUCTURE FOR LEAD FAST REACTOR RESEARCH: THE VLF AND PHRF FACILITIES
Wells, Gary	CONTROLLING DROPLET SIZE DENSITY DURING DROPWISE CONDENSATION ON SILICONE OIL GRAFTED SURFACES
Welzl, Matthias	Single bubble nucleate pool boiling for climate friendly cooling solutions
Werner, Thomas	Analytical model and comparative fluid analysis tool for screen and sinter wick heat pipes
Widdows, Patrick	OPTIMIZATION OF A TRANS- CRITICAL HEAT PUMP CYCLE USING A MIXTURE OF PROPANE AND BUTANE INTEGRATED WITH AN INDUSTRIAL DRYER
Widgington, Joseph	A NOVEL FEED-FORWARD NEURAL NETWORK FOR FLOW BOILING PATTERN PREDICTION
Widyatama, Arif	FLOW BEHAVIOUR AND WALL TEMPERATURE DISTRIBUTION OF LOW CONCENTRATION BUTANOL-WATER MIXTURE FLOW BOILING UNDER DIFFERENT FLOW ORIENTATION
Wilkes, Adam	Integrated Two-Phase Immersion Cooling of Electric Vehicle Batteries with Organic Rankine Cycle
Wilson, D. Ian	DIRECT THERMAL MANAGEMENT FOR LITHIUM ION BATTERIES
Wilson, Dean	Effect of Partial Heating on Natural Convection in a Cubical Cavity with an Internal Obstacle: A URANS Study CFD Modelling of Lead Solidification and Natural Convection for the Westinghouse Lead-cooled Fast Reactor
Wirtz, Marius	QUALIFICATION AND TESTING OF MATERIALS AND COMPONENTS FOR APPLICATIONS IN FUSION
Wong, Nancy Lai Mun	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Wredh, Simon	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Wright, Edward	EXPERIMENTAL ANALYSIS OF FILM HOLE WALL HEAT TRANSFER ‎USING TRANSIENT LIQUID CRYSTALS
Wu, Steve Qing Yang	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Wu, Zhen	Harnessing Microwave and Heat Exchanger for Enhanced Hydrogen Desorption in MgH2 Hydride Storage System
X
Xie, Jianfei	EXPLORING THE POTENTIAL OF MACHINE LEARNING IN COMBUSTION ENGINE OPTIMIZATION
Xu, Fang	DEVELOPMENT OF SILICONE POLYMER COMPOSITES WITH HYBRID BN AND SIC FILLERS FOR IMPROVED THERMAL CONDUCTIVITY
Xue, Zongguo	INVESTIGATION ON HEAT TRANSFER CHARACTERISTICS OF LOCAL HOT SPOT ON THE HIGH-POWER ELECTRONIC CHIP SURFACE
Y
Yan, Yunfei	INVESTIGATION ON HEAT TRANSFER CHARACTERISTICS OF LOCAL HOT SPOT ON THE HIGH-POWER ELECTRONIC CHIP SURFACE
Yan, Yuying	Analytical model and comparative fluid analysis tool for screen and sinter wick heat pipes IMPROVED PERFORMANCE OF DROPLET-BASED ELECTRICITY GENERATORS USING SPECIALLY SHAPED SUBSTRATES THE APPLICATION OF PHASE CHANGE MATERIALS IN FOOD PRESERVATION USING INDIRECT TYPE SOLAR DRYER (ITSD) Study on heterogeneous condensing flow characteristics in turbine cascade EXPERIMENTAL ANALYSIS OF FILM HOLE WALL HEAT TRANSFER ‎USING TRANSIENT LIQUID CRYSTALS
Yang, Jeol	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Yang, Zhiyin	EXPLORING THE POTENTIAL OF MACHINE LEARNING IN COMBUSTION ENGINE OPTIMIZATION
Yaqoob, Haseeb	SOLAR DESALINATION INNOVATIONS: A COMPARATIVE ANALYSIS OF PYRAMID AND INCLINED SOLAR STILL
You, Jinxiang	INVESTIGATION ON HEAT TRANSFER CHARACTERISTICS OF LOCAL HOT SPOT ON THE HIGH-POWER ELECTRONIC CHIP SURFACE
Yu, Zhibin	DYNAMIC SIMULATION AND PERFORMANCE COMPARISON OF TWO-STAGE AND SINGLE-STAGE HEAT PUMPS WITH INTERMEDIATE TEMPERATURE CONTROL
Z
Zai, Wenhao	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Zaidi, Ali H.	SINGLE-PHASE PRESSURE DROP AND HEAT TRANSFER IN MICRO-PIN FIN HEAT EXCHANGERS
Zamiri, Golnoush	Direct Photo-Thermoelectric Conversion Based Mid-Infrared Detection
Zehnder, Margaux	LOW-PRANDTL NUMBER HEAT TRANSFER FLUIDS IN PACKED-BED HEAT STORAGE
Zettler, Hans	Navigating the challenges: Optimizing fired heaters with air preheaters
Zhang, Chenghua	INVESTIGATION ON HEAT TRANSFER CHARACTERISTICS OF LOCAL HOT SPOT ON THE HIGH-POWER ELECTRONIC CHIP SURFACE
Zhang, Hongnan	DEVELOPMENT OF SILICONE POLYMER COMPOSITES WITH HYBRID BN AND SIC FILLERS FOR IMPROVED THERMAL CONDUCTIVITY
Zhang, Jianhui	MORPHOLOGICAL TRANSITIONS IN FROZEN COLLOIDAL DROPLETS
Zhang, Ningxi	BUBBLE COALESCENCE DURING NUCLEATE BOILING OF BINARY MIXTURES FROM ARTIFICIAL CAVITIES
Zhang, Shengqi	Additive Manufacturing for Thermal Management applications: advantages and current limitations
Zhang, Yue	Application of PCM in External Walls of Typical Residential Buildings in the UK and Their Impact on Building Energy Consumption
Zivariravan, Amir	Dynamic Analysis of Adsorption Heat Transformation: A Dimensionless Model Approach for Comparative Evaluation of Sorption Bed Designs

Disclaimer | Powered by EasyChair Smart Program