SIF 2026: STRUCTURES IN FIRE (SIF) 2026

A
Abboud, Najib	Characterizing Fire and Gas-Release Behavior in Electric Buses and Implications for Structural Fire Engineering Practice
Abu, Anthony	Strength and Stiffness of Radiata Pine at Elevated Temperatures, for Timber Column Design in Realistic Fires Design for Structural Fire Resistance Recommendations to be Incorporated into the New Zealand Steel Structure Design Standard of DZ 3404 Strength of Woodcrete under fire conditions
Adelzadeh, Masoud	Fire Hazard Assessment of a Steel Truss Bridge Subjected to Hydrocarbon Pool Fires: High-Fidelity Thermal Exposure Modeling
Adelzadeh, Masoud	Strength Estimation in Concrete Exposed to Elevated Temperature through Pore Size Distribution
Agarwal, Anil	Fireproofing through Waterproofing: A Novel Vermiculite Mortar System for Fire Protection of FRP Strengthened RC Members Effect of Fibre Reinforcement in Concrete on the Post Earthquake Fire Resistance of CFST Columns
Ahmad, Izaz	Retrofitting Fire-Damaged Glulam Beams using Fabric-Reinforced Cementitious Matrix (FRCM) System
Ahmad, Izaz	Experimental Evaluation of Geopolymer-based FRCM versus the Conventional Gypsum Board Encapsulation for Fire Protection of Mass Timber
Al Hamd, Rwayda	Analysis of the Charring Behaviour of Heritage Timber using Digital Image Correlation
Al-Hamd, Rwayda	Towards Data-Driven and Explainable AI for Structural Fire Safety: Predicting Bond Performance at Elevated Temperatures
Alam, Marc	Experimental Study of Mass Timber Compartment Fire Dynamics on Building Construction Sites
Alam, Naveed	Impact of Travelling Fires on Collapse Mechanisms of Steel Structures with Non-Uniform Temperature Distribution
Alanen, Mika	Experimental study on cross-laminated timber panels exposed to parametric fires Fire resistance of CLT-slab in a natural fire including cooling phase - experimental study and comparison to numerical analysis
Albostami, Asad	Towards Data-Driven and Explainable AI for Structural Fire Safety: Predicting Bond Performance at Elevated Temperatures
Alford, Matthew	Thermal and Mechanical Behaviour of Reinforcement Lock shear Bolt Coupler Systems Under Elevated Temperature
Almaadawy, Ahmed	: NUMERICAL MODEL FOR EVALUATING FIRE PERFORMANCE OF POLYMERIC CONCRETE BEAMS
Ameri, Shaghayegh	Fire Behavior of Novel Connections to CFST Columns with Steel Core
Andriotto, Daniele	Structural fire response of an arch-suspended steel roof in an ice stadium
Aoki, Kota	POST-FIRE MATERIAL PROPERTIES OF PRE-STRAINED JIS SN400B STEEL: EXPERIMENTAL STUDY
Au, Francis Tk	Numerical simulation of post-tensioned concrete bridges exposed to fire considering the effects of bonding and spalling
B
Baek, Seunghwan	Fire Behavior of Protected Korean Square CFT Columns
Bakhtiyari, Saeed	Experimental study on the effect of infill concrete in reducing the amount of fire protection system required for hollow steel columns
Bamonte, Patrick	Parametric Experimental And Numerical Study On Rc Columns Stability During Natural Fire A Comprehensive Numerical Approach for the Analysis of Deep Tunnels in Fire Conditions
Banerji, Srishti	: NUMERICAL MODEL FOR EVALUATING FIRE PERFORMANCE OF POLYMERIC CONCRETE BEAMS
Barber, David	Experimental and Numerical Investigation of Plastic Hinging of Fasteners in CLT Balloon-Frame Connections: Insights from the WOODWISE Large-Scale Compartment Fire Tests
Barber, David	Mass Timber Beam to Column Connection Fire Resistance Testing – Lessons Learnt from Ad-hoc Testing and the Need for a Standardised Test Methodology
Baron, David	Parametric analysis of thermal-induced second order stresses in steel beams under fire exposure
Baron, David	Parametric analysis of hot spotting when considering coat-backs to steel hollow framing into open sections under fire exposure
Barozzi, Marco	Thermomechanical analysis of a precast concrete industrial frame structure subjected to jet fires
Beaulieu, Antony	Characterization of Timber Charring Rate Under Real Design Fire Scenarios
Benoit, Anna	Framework for Quantified Risk Assessment of Bridge Fire Safety
Bernat, Berenika	Incorporating spalling uncertainty into fire-induced damage analysis of concrete structures
Bhattacharyya, Sriman Kumar	Strength Estimation in Concrete Exposed to Elevated Temperature through Pore Size Distribution
Bianchi, Mattia	Thermomechanical analysis of a precast concrete industrial frame structure subjected to jet fires
Bilotta, Antonio	Fire assessment of r.c. building trough fragility curves
Bisby, Luke	Mechanical Characterisation of Timber in Compression under Transient Heating The role of furnace testing for performance-based design and future regulations Thermal and Mechanical Behaviour of Reinforcement Lock shear Bolt Coupler Systems Under Elevated Temperature Structural fire performance of square STCRC columns under non-uniform heating conditions
Blankenhagen, Jakob	Timber Claddings as Fire Protection for Steel Columns: Experimental Study and Practical Design Rules
Bonhomme, Marie-Hélène	Numerical investigation of a Steel–Concrete composite (SC) floor exposed to ISO 834 standard fire
Bouchair, Abdelhamid	Experimental and Numerical Study of Fusible Links Using Aluminium Bolts in Single-Storey Buildings
Boukraa, Hedi	Timber Claddings as Fire Protection for Steel Columns: Experimental Study and Practical Design Rules
Buchanan, Andy	Strength and Stiffness of Radiata Pine at Elevated Temperatures, for Timber Column Design in Realistic Fires
Bärtschi, Roland	On the fire resistance of granite columns
C
Cabova, Kamila	Full-Scale Fire Test of a Steel Portal Frame Hall: Experimental and Numerical Findings Performance-Based Fire Modelling of Steel Frames Using CBFEM Coupled Model for Charring and Crack Evolution in Timber under Fire Exposure
Cai, Nicolas Lei	EXPERIMENTAL STUDY ON FIRE-INDUCED COLLAPSE OF TIMBER STRUCTURES AND ITS IMPACT ON FIRE DYNAMICS
Camotim, Dinar	Behaviour and DSM Design of CFS Beams Undergoing Distortional-Global Interaction at Elevated Temperatures
Cao, Yifan	Modeling of Urban Fire Spread: Development of an Integrated CA-Unity Simulation Framework
Cashell, Katherine	AI-Enhanced Beam-Column Elements for Efficient System-Level Fire Analysis
Cassiman, Thias	Full-Scale Investigation of Shear Failure Mechanisms in Reinforced Concrete Beams Under Fire Loading
Charlier, Marion	Timber and Cold-Formed Steel Housing: Structural Fire Behavior and Cluster Vulnerability in the WUI
Chen, Herry	Thermal Propagation and Post-fire Flexural Performance of Cross-laminated Timber Exposed to a Localized Fire
Chen, Jing	Structural fire performance of square STCRC columns under non-uniform heating conditions
Chen, Lingzhu	Experimental study on the mechanical performance of grouted sleeve splices of high-strength rebar after exposure to high temperatures
Chen, Wei	Modeling of Urban Fire Spread: Development of an Integrated CA-Unity Simulation Framework
Chen, Xi	Experimental study on the mechanical performance of grouted sleeve splices of high-strength rebar after exposure to high temperatures
Chen, Zhihao	Fire Performance of Fe-SMA Materials and Steel Joints Assembled with Fe-SMA Bolts
Chin, Kathryn	Fire Performance of Biaxial Steel Shear Tab Connections
Cho, Yonghyun	Temperature Distribution Assessment of GIR Column-Beam Connections for Mid- to High-Rise Timber Building
Choi, In-Rak	Evaluation of High-Temperature Properties and Fire Resistance of Unprotected SHN355FR Steel Columns Fire-Induced Thermal Responses of CFT Columns Using FDS-ABAQUS Coupled Analysis under Real-Scale Compartment Fires Fire Behavior of Protected Composite Beams Filled with Concrete
Choi, Sungmo	Temperature Distribution Assessment of GIR Column-Beam Connections for Mid- to High-Rise Timber Building Fire Behavior of Protected Korean Square CFT Columns Fire-Induced Thermal Responses of CFT Columns Using FDS-ABAQUS Coupled Analysis under Real-Scale Compartment Fires Fire Behavior of Protected Composite Beams Filled with Concrete
Chrzanowski, Maciej	Timber and Cold-Formed Steel Housing: Structural Fire Behavior and Cluster Vulnerability in the WUI
Cibelli, Antonio	Multihazard vulnerability assessment of reinforced concrete bridge piers subjected to earthquake and fire Multi-hazard analysis of buildings exposed to earthquake and fire using OpenSees Analysis of Explosive Spalling in Tunnel Linings Exposed to Fire: The Role of Fiber-Reinforced Concrete Fragility-based cost-benefit methodology for the fire assessment of steel structures Fire fragility assessment of steel industrial buildings Fire behaviour of RC members strengthened with external steel plates: a review Seismic vulnerability assessment of fire damaged RC buildings
Clifton, G. Charles	Design for Structural Fire Resistance Recommendations to be Incorporated into the New Zealand Steel Structure Design Standard of DZ 3404
Coello, Nicolas	Experimental and Numerical Investigation of Plastic Hinging of Fasteners in CLT Balloon-Frame Connections: Insights from the WOODWISE Large-Scale Compartment Fire Tests
Compagnone, Alberto	Fire assessment of r.c. building trough fragility curves
Copelli, Sabrina	Thermomechanical analysis of a precast concrete industrial frame structure subjected to jet fires
Coppard, Perran	Strength of Woodcrete under fire conditions
Couto, Carlos	Numerical investigation on the failure modes of cellular steel beams under combined axial force and bending moments at elevated temperature
Covi, Patrick	Multi-hazard analysis of buildings exposed to earthquake and fire using OpenSees Fragility functions of a steel pipe rack under wilfire scenarios Fire fragility functions of bridges subjected to vehicle fire scenarios
Craveiro, Hélder	CALIBRATION OF A DUCTILE FRACTURE MODEL FOR COLD-FORMED STEEL AT ELEVATED TEMPERATURES PERFORMANCE-BASED DESIGN OF STEEL STRUCTURES AT THE WILDLAND-URBAN INTERFACE: A COUPLED CFD-FEM METHODOLOGY CONCRETE-FILLED COLD-FORMED (CF-CFS) STEEL COMPOSITE COLUMNS AT ELEVATED TEMPERATURE Fire Safety Assessment of Steel Frames with Dissipative Beam-to-Column Joints
D
Dagenais, Christian	Characterization of Timber Charring Rate Under Real Design Fire Scenarios Effect of Gap Size and Grain Orientation on Fire Performance of Mass Timber Joints
Dai, Peng	Post-fire mechanical properties of corroded Q235 steel under different cooling regimes
Dai, Xu	The wind effect on the disproportionate collapse of an open-sided steel-concrete composite floor car park in travelling fires A numerical study on the axial force development at beam-end shear connections during a large compartment fire experiment
Dal Lago, Bruno	Thermomechanical analysis of a precast concrete industrial frame structure subjected to jet fires
Daniels, Steven	Simulating the Contribution of Exposed Cross-Laminated Timber Ceilings to Enclosure Fire Dynamics using the FDS SPyro Model
Dashdemberel, Norovbadam	Fire Behavior of Protected Composite Beams Filled with Concrete
De Rosa, Gabriella	Fire assessment of r.c. building trough fragility curves
De Santis, Paola	Fragility-based cost-benefit methodology for the fire assessment of steel structures Seismic vulnerability assessment of fire damaged RC buildings
de Silva, Donatella	Multihazard vulnerability assessment of reinforced concrete bridge piers subjected to earthquake and fire Multi-hazard analysis of buildings exposed to earthquake and fire using OpenSees Analysis of Explosive Spalling in Tunnel Linings Exposed to Fire: The Role of Fiber-Reinforced Concrete Fire fragility functions of bridges subjected to vehicle fire scenarios Fragility-based cost-benefit methodology for the fire assessment of steel structures Fire fragility assessment of steel industrial buildings Fire behaviour of RC members strengthened with external steel plates: a review Fire assessment of r.c. building trough fragility curves Seismic vulnerability assessment of fire damaged RC buildings
De Simone, Fabio	Multi-hazard analysis of buildings exposed to earthquake and fire using OpenSees
Der, Batuhan	Combination of two-zone and localised fire models for performance-based fire design of single-storey steel industrial hall
Di Meglio, Francesco	Fire fragility functions of bridges subjected to vehicle fire scenarios Fire fragility assessment of steel industrial buildings
Dillard, Joshua	Modeling of Post-Earthquake Fire Response of a Full-Scale CFS Building
Dionisio, Francesco	Fire fragility assessment of steel industrial buildings Fire assessment of r.c. building trough fragility curves
Domada, Ramakanth	A Thermo-Mechanical Analysis of the Gretzenbach Flat Slab Parking Structure Analysis of an Axisymmetric Plate in the Context of Stress Concentration-Induced Punching Shear
Douglas, Cameron	Strength and Stiffness of Radiata Pine at Elevated Temperatures, for Timber Column Design in Realistic Fires
Du, Panwei	Deep Learning Model for Heat Transfer Analysis in Concrete Structures under Fire Predicting fire endurance of shear-critical fibre-reinforced lightweight aggregate concrete continuous beams through strut-and-tie approach
Du, Yong	Performance-based structural fire design of large-span timber structures: new concept, research and application
Duan, Xinran	Behavior of bolted connections between Fe-SMA and steel in fire
Dumler, Patrick	Timber Claddings as Fire Protection for Steel Columns: Experimental Study and Practical Design Rules
Durif, Sébastien	Experimental and Numerical Study of Fusible Links Using Aluminium Bolts in Single-Storey Buildings
E
Eiz Eddin, Ahmad	Behaviour of CFRP-reinforced Concrete at Elevated Temperatures
Elhami-Khorasani, Negar	Post-fire behavior of reinforced concrete beams: effects of full burnout and bond degradation Timber and Cold-Formed Steel Housing: Structural Fire Behavior and Cluster Vulnerability in the WUI Incorporating spalling uncertainty into fire-induced damage analysis of concrete structures
Emberley, Richard	Modeling of Post-Earthquake Fire Response of a Full-Scale CFS Building
Enright, Sean	Parametric analysis of thermal-induced second order stresses in steel beams under fire exposure
Espinós, Ana	Experimental investigation on the fire performance of demountable steel-timber composite beams with sustainable passive protection
F
Fernandes, Bruno	Parametric Experimental And Numerical Study On Rc Columns Stability During Natural Fire
Fetterly, Noah	Experimental Study of Mass Timber Compartment Fire Dynamics on Building Construction Sites
Fiorini, Cesare	PERFORMANCE-BASED DESIGN OF STEEL STRUCTURES AT THE WILDLAND-URBAN INTERFACE: A COUPLED CFD-FEM METHODOLOGY
Fischer, Erica	Quantifying Charring and Temperature Rise of Gaps in Glulam Beam-To-Column Connections Experimental and Numerical Investigation of Plastic Hinging of Fasteners in CLT Balloon-Frame Connections: Insights from the WOODWISE Large-Scale Compartment Fire Tests
Flint, Graeme	Framework for Quantified Risk Assessment of Bridge Fire Safety Structural Fire Response to Multi-storey Fires
Franchini, Andrea	The role of furnace testing for performance-based design and future regulations
Franchini, Andrea	Time-dependent model uncertainty quantification for thermo-mechanical analysis
Franssen, Jean-Marc	Parametric Experimental And Numerical Study On Rc Columns Stability During Natural Fire
Fu, Yan	Simulating the Contribution of Exposed Cross-Laminated Timber Ceilings to Enclosure Fire Dynamics using the FDS SPyro Model
Fürst, Richard	Numerical simulation approach to identify the thermal protective properties of intumescent coatings based on in situ fire tests
G
Gales, John	Thermal Propagation and Post-fire Flexural Performance of Cross-laminated Timber Exposed to a Localized Fire Fire Performance of Biaxial Steel Shear Tab Connections Towards Data-Driven and Explainable AI for Structural Fire Safety: Predicting Bond Performance at Elevated Temperatures Investigation into Mechanical Response and Explosive Spalling of Fibre Reinforced UHPC Beams Subjected to Localised Fires Analysis of the Charring Behaviour of Heritage Timber using Digital Image Correlation
Gapak, Bomte	Cement Mortar Modified with Hybrid Carbon Nano Tube - Reduced Graphene Oxide Mix at Elevated Temperature
Gargiulo, Nunzia	Analysis of Explosive Spalling in Tunnel Linings Exposed to Fire: The Role of Fiber-Reinforced Concrete Fire behaviour of RC members strengthened with external steel plates: a review
Garrett, Wyatt	Quantifying Charring and Temperature Rise of Gaps in Glulam Beam-To-Column Connections
Gernay, Thomas	Modeling of Post-Earthquake Fire Response of a Full-Scale CFS Building Quantifying Uncertainty in High-Temperature Mechanical Properties of Cold-Formed Steel for Reliability-Informed Fire Design Computational modeling of timber columns subjected to furnace and compartment fire tests Interpretable machine learning for predicting the fire resistance of performance-based composite floor systems Simplified method to predict the failure of wood truss floor assemblies in fire Predicting Steel Temperatures of Beams and Columns in Modular Buildings Using Full-Scale Tests and Numerical Heat Transfer Analysis Parametric analysis of thermal-induced second order stresses in steel beams under fire exposure Parametric Experimental And Numerical Study On Rc Columns Stability During Natural Fire Timber and Cold-Formed Steel Housing: Structural Fire Behavior and Cluster Vulnerability in the WUI Combination of two-zone and localised fire models for performance-based fire design of single-storey steel industrial hall
Girompaire, Luc	Effect of Gap Size and Grain Orientation on Fire Performance of Mass Timber Joints
Gladoun, Ostap	Characterizing Fire and Gas-Release Behavior in Electric Buses and Implications for Structural Fire Engineering Practice
Glorieux, Antoine	Numerical investigation on the failure modes of cellular steel beams under combined axial force and bending moments at elevated temperature Combination of two-zone and localised fire models for performance-based fire design of single-storey steel industrial hall
Gomaa, Islam	Fire Hazard Assessment of a Steel Truss Bridge Subjected to Hydrocarbon Pool Fires: High-Fidelity Thermal Exposure Modeling
Gorska, Carmen	Simulating the Contribution of Exposed Cross-Laminated Timber Ceilings to Enclosure Fire Dynamics using the FDS SPyro Model
Green, Mark	TENSILE PROPERTIES OF ULTRA HIGH-PERFORMANCE CONCRETE AT STEADY STATE ELEVATED TEMPERATURES Residual Shear Transfer Strength of Steel Fibre-Reinforced Concrete after Exposure to Elevated Temperatures NUMERICAL INVESTIGATION OF ULTRA-HIGH PERFORMANCE CONCRETE DOUBLE-WYTHE INSULATED WALL PANELS EXPOSED TO FIRE
Grolimund, Reto	On the fire resistance of granite columns
H
Ha, Taehyu	Fire Performance of Unprotected Modular Steel Buildings with Gypsum Board Ceilings
Hakamäki, Tuomas	Fire resistance of CLT-slab in a natural fire including cooling phase - experimental study and comparison to numerical analysis
Han, Kyu-Hong	Fire Performance of Unprotected Modular Steel Buildings with Gypsum Board Ceilings
Han, Seulgi	Temperature Distribution Assessment of GIR Column-Beam Connections for Mid- to High-Rise Timber Building Fire Behavior of Protected Korean Square CFT Columns Fire Behavior of Protected Composite Beams Filled with Concrete
Hasburgh, Laura	Quantifying Charring and Temperature Rise of Gaps in Glulam Beam-To-Column Connections Experimental and Numerical Investigation of Plastic Hinging of Fasteners in CLT Balloon-Frame Connections: Insights from the WOODWISE Large-Scale Compartment Fire Tests
Hashimoto, Keigo	Numerical analysis model for a partially composite beam composed of glulam beam and RC slab in fire
He, Mingzhe	Simulating the Contribution of Exposed Cross-Laminated Timber Ceilings to Enclosure Fire Dynamics using the FDS SPyro Model
Herrera, Vicente	On the fire resistance of granite columns
Hirashima, Takeo	Numerical analysis model for a partially composite beam composed of glulam beam and RC slab in fire
Hopkin, Charlie	The wind effect on the disproportionate collapse of an open-sided steel-concrete composite floor car park in travelling fires
Hopkin, Danny	Mechanical Characterisation of Timber in Compression under Transient Heating Simulating the Contribution of Exposed Cross-Laminated Timber Ceilings to Enclosure Fire Dynamics using the FDS SPyro Model
Horii, Soichiro	EXPERIMENTAL STUDY ON RESIDUAL PULL-OUT BEHAVIOR OF POST-INSTALLED METAL ANCHORS AFTER FIRE EXPOSURE
Horne, Paul	Strength of Woodcrete under fire conditions
Hothan, Sascha	Fire resistance of thermally restrained steel-reinforced concrete columns On the fire resistance of granite columns Behaviour of CFRP-reinforced Concrete at Elevated Temperatures Numerical simulation approach to identify the thermal protective properties of intumescent coatings based on in situ fire tests
Huang, Anlin	Effects of pre-tensile stress on post-fire mechanical properties of Q460 high strength structural steel
Huang, Jiarui	Study on Fracture Ductility of Q460 Steel under Complex Stress States at High Temperatures
Huang, Ting	Numerical simulation of post-tensioned concrete bridges exposed to fire considering the effects of bonding and spalling
Huang, Yunke	An Investigation of Explosive Spalling in Concrete: Is Pore Pressure More Important or Thermally Induced Stress
Hutchinson, Tara	Modeling of Post-Earthquake Fire Response of a Full-Scale CFS Building
Häßler, Dustin	Fire resistance of thermally restrained steel-reinforced concrete columns Behaviour of CFRP-reinforced Concrete at Elevated Temperatures Numerical simulation approach to identify the thermal protective properties of intumescent coatings based on in situ fire tests
I
Iacobellis, Vincent	Consequence assessment of structures exposed to gas transmission pipeline rupture-induced fire
Ibrahimli, Vusal	Experimental Study of Mass Timber Compartment Fire Dynamics on Building Construction Sites
Idenawa, Mana	AN INVESTIGATION OF EXPLOSIVE SPALLING OF CONCRETE EXPOSED TO FIRE
Iwase, Taiga	Numerical analysis model for a partially composite beam composed of glulam beam and RC slab in fire
J
Jasinski, Melody	Investigation into Mechanical Response and Explosive Spalling of Fibre Reinforced UHPC Beams Subjected to Localised Fires
Jaworska, Katarzyna	Framework for Quantified Risk Assessment of Bridge Fire Safety
Jeanneret, Chloe	Fire Performance of Biaxial Steel Shear Tab Connections
Ji, Kai	Consequence assessment of structures exposed to gas transmission pipeline rupture-induced fire
Ji, Wei	AI-Enhanced Beam-Column Elements for Efficient System-Level Fire Analysis
Jiang, Binhui	Study on Fracture Ductility of Q460 Steel under Complex Stress States at High Temperatures STUDY ON POST-FIRE MECHANICAL PROPERTIES OF Q370QD BRIDGE STEEL
Jiang, Jian	Modeling of Urban Fire Spread: Development of an Integrated CA-Unity Simulation Framework
Jiang, Liming	AI-Enhanced Beam-Column Elements for Efficient System-Level Fire Analysis An Investigation of Explosive Spalling in Concrete: Is Pore Pressure More Important or Thermally Induced Stress
Jiang, Xu	Behavior of cyclically-damaged Fe-SMA and structural steels in fire Behavior of bolted connections between Fe-SMA and steel in fire Fire Performance of Fe-SMA Materials and Steel Joints Assembled with Fe-SMA Bolts
Jones, Bevan	PERFORMANCE-BASED FIRE DESIGN OF STEEL-TIMBER CONNECTIONS: A CASE STUDY
Jorat, Ehsan	Analysis of the Charring Behaviour of Heritage Timber using Digital Image Correlation
Jovanović, Balša	Numerical Post-fire Damage Quantification of Concrete Tunnels Reliability-based assessment of the zero-strength layer in the design of timber structures exposed to fire Full-Scale Investigation of Shear Failure Mechanisms in Reinforced Concrete Beams Under Fire Loading The role of furnace testing for performance-based design and future regulations Time-dependent model uncertainty quantification for thermo-mechanical analysis Safety format for the design of protected steel columns for burnout resistance Assessing various techniques for the post-fire assessment of concrete structures
Jung, Do Jin	Numerical Analysis on Structural Fire Behavior of Rectangular CFT Columns with Different Aspect Ratios
K
Kabore, Aguerata	Fire Behavior of Hempcrete with Partial Lime Replacement by Natural Pozzolan
Kahandawa Arachchi, Tharika	Fire performance of PCM-incorporated concrete
Kalali, Arsalan	Experimental study on the effect of infill concrete in reducing the amount of fire protection system required for hollow steel columns
Kamath, Praveen	PERFORMANCE-BASED FIRE DESIGN OF STEEL-TIMBER CONNECTIONS: A CASE STUDY
Kato, Masaki	AN INVESTIGATION OF EXPLOSIVE SPALLING OF CONCRETE EXPOSED TO FIRE EXPERIMENTAL STUDY ON REINFORCEMENT-CONCRETE BOND AND SLIP AT ELEVATED TEMPERATURES EXPERIMENTAL STUDY ON RESIDUAL PULL-OUT BEHAVIOR OF POST-INSTALLED METAL ANCHORS AFTER FIRE EXPOSURE POST-FIRE MATERIAL PROPERTIES OF PRE-STRAINED JIS SN400B STEEL: EXPERIMENTAL STUDY NUMERICAL STUDY ON THERMAL STRESS IN HIGH-STRENGTH CONCRETE INDUCED BY WATER VAPOR PRESSURE UNDER FIRE EXPOSURE.
Kevinly, Christopher	Predicting fire endurance of shear-critical fibre-reinforced lightweight aggregate concrete continuous beams through strut-and-tie approach
Khalighi, Amir	Fire Performance of Mass Timber Beam-to-Column Concealed, Interlocking Connections
Khazaeinejad, Payam	A Thermo-Mechanical Analysis of the Gretzenbach Flat Slab Parking Structure Analysis of an Axisymmetric Plate in the Context of Stress Concentration-Induced Punching Shear
Kim, Elena	Predicting Thermal Actions from ICEV and EV Localised Fires Using Conical and Cylindrical Flame Models
Kim, Hyuk	Predicting Steel Temperatures of Beams and Columns in Modular Buildings Using Full-Scale Tests and Numerical Heat Transfer Analysis
Kim, Sungbae	Fire Behavior of Protected Korean Square CFT Columns
Kim, Sunhee	Temperature Distribution Assessment of GIR Column-Beam Connections for Mid- to High-Rise Timber Building Fire-Induced Thermal Responses of CFT Columns Using FDS-ABAQUS Coupled Analysis under Real-Scale Compartment Fires
Kinoshita, Takuya	Experimental study on unprotected steel tubular column filled with steel-fibre-reinforced high-strength concrete at elevated temperatures
Kizildemir, Sena	Characterizing Fire and Gas-Release Behavior in Electric Buses and Implications for Structural Fire Engineering Practice
Kodur, Venkatesh	: NUMERICAL MODEL FOR EVALUATING FIRE PERFORMANCE OF POLYMERIC CONCRETE BEAMS
Kodur, Venkatesh	Machine Learning–Based Prediction of Fire Resistance and Failure Modes of Steel Connections: A Multi-Study Experimental Synthesis with Code Comparison
Koohkhezri, Morvarid	The wind effect on the disproportionate collapse of an open-sided steel-concrete composite floor car park in travelling fires
Kotsovinos, Panagiotis	Fire Performance of Biaxial Steel Shear Tab Connections
Koutsoloukas, Lefteris	Parametric analysis of hot spotting when considering coat-backs to steel hollow framing into open sections under fire exposure Parametric analysis of thermal-induced second order stresses in steel beams under fire exposure
Koyama, Taku	INFLUENCE OF COMPRESSIVE STRENGTH ON FIRE-INDUCED SPALLING DEPTH OF CONCRETE EVALUATED BY A RING‑RESTRAINED HEATING TEST Comparison of Spalling Depths Obtained by the Ring-Constrained Heat Test and by Heat Tests of Various RC and PC Members
Kudryashov, Vadim	Steel Profiled Sheeting Fire Resistance Tests: Extended Experimental Results and Future Proposals
Kumar, Rabinder	Impact of Travelling Fires on Collapse Mechanisms of Steel Structures with Non-Uniform Temperature Distribution
Kurikova, Marta	Full-Scale Fire Test of a Steel Portal Frame Hall: Experimental and Numerical Findings Performance-Based Fire Modelling of Steel Frames Using CBFEM
Kwon, Oh-Sung	MODEL-BASED ADAPTIVE KINEMATIC TRANSFORMATION FOR MULTI DEGREE-OF-FREEDOM HYBRID FIRE SIMULATION WITH ONGOING HIGH TEMPERATURE TEST DEVELOPMENT
L
Lacroix, Daniel	Thermal Propagation and Post-fire Flexural Performance of Cross-laminated Timber Exposed to a Localized Fire
Ladhani, Zane	Mechanical Characterisation of Timber in Compression under Transient Heating
Laghdir, Aziz	Fire Behavior of Hempcrete with Partial Lime Replacement by Natural Pozzolan
Lai, Zhichao	Effects of pre-tensile stress on post-fire mechanical properties of Q460 high strength structural steel
Lalu, Octavian	Fire performance of Timber Frame construction: Large-scale compartment test under natural fire conditions
Landesmann, Alexandre	Behaviour and DSM Design of CFS Beams Undergoing Distortional-Global Interaction at Elevated Temperatures
Lange, David	Cement Mortar Modified with Hybrid Carbon Nano Tube - Reduced Graphene Oxide Mix at Elevated Temperature
Laoda, Mendy	Probabilistic models for density and thermal properties of timber at elevated temperatures
Lapuebla-Ferri, Andrés	Experimental investigation on the fire performance of demountable steel-timber composite beams with sustainable passive protection
Laím, Luís	CALIBRATION OF A DUCTILE FRACTURE MODEL FOR COLD-FORMED STEEL AT ELEVATED TEMPERATURES PERFORMANCE-BASED DESIGN OF STEEL STRUCTURES AT THE WILDLAND-URBAN INTERFACE: A COUPLED CFD-FEM METHODOLOGY CONCRETE-FILLED COLD-FORMED (CF-CFS) STEEL COMPOSITE COLUMNS AT ELEVATED TEMPERATURE
Le, Van Lanh	Numerical Analysis on Structural Fire Behavior of Rectangular CFT Columns with Different Aspect Ratios
Lee, Chang-Hwan	Predicting Steel Temperatures of Beams and Columns in Modular Buildings Using Full-Scale Tests and Numerical Heat Transfer Analysis Numerical Analysis on Structural Fire Behavior of Rectangular CFT Columns with Different Aspect Ratios
Lee, Hansol	Fire-Induced Thermal Responses of CFT Columns Using FDS-ABAQUS Coupled Analysis under Real-Scale Compartment Fires
Leng, Yubing	Experimental study on the mechanical performance of grouted sleeve splices of high-strength rebar after exposure to high temperatures
Leniston-Bagnall, Natasha	Strength of Woodcrete under fire conditions
Lennon, Tom	Fire performance of Timber Frame construction: Large-scale compartment test under natural fire conditions
Li, Guoqiang	AI-Enhanced Beam-Column Elements for Efficient System-Level Fire Analysis Effects of pre-tensile stress on post-fire mechanical properties of Q460 high strength structural steel Performance-based structural fire design of large-span timber structures: new concept, research and application Study on fire resistance performance and design of partially encased steel-concrete composite columns
Li, Junyi	Post-fire mechanical properties of corroded Q235 steel under different cooling regimes
Li, Ruifeng	Study on fire resistance performance and design of partially encased steel-concrete composite columns
Li, Shijie	AI-driven natural fire testing method: concept and experimental exploration
Li, Siqi	Experimental research on the fire resistance performance of end restrained high-strength steel-concrete composite beams
Lim, Linus	PERFORMANCE-BASED FIRE DESIGN OF STEEL-TIMBER CONNECTIONS: A CASE STUDY
Lin, Jiandan	Retrofitting Fire-Damaged Glulam Beams using Fabric-Reinforced Cementitious Matrix (FRCM) System
Liu, Faqi	Structural fire performance of square STCRC columns under non-uniform heating conditions
Liu, Tong	Study on Fracture Ductility of Q460 Steel under Complex Stress States at High Temperatures
Londono, Juan G.	Characterizing Fire and Gas-Release Behavior in Electric Buses and Implications for Structural Fire Engineering Practice
Lopes, Nuno	Fire resistance of steel I-beams subjected to lateral torsional buckling considering non-uniform temperatures distribution
Lou, Guobiao	Performance-based structural fire design of large-span timber structures: new concept, research and application Study on fire resistance performance and design of partially encased steel-concrete composite columns
Lucherini, Andrea	Reliability-based assessment of the zero-strength layer in the design of timber structures exposed to fire Eurocode Parametric Fire Curves: Improved Formulation for the Fire Decay and Cooling Phases Assessing various techniques for the post-fire assessment of concrete structures
Lv, Xingjia	Post-fire mechanical properties of corroded Q235 steel under different cooling regimes
M
Ma, Chenzhi	Interpretable machine learning for predicting the fire resistance of performance-based composite floor systems
Ma, Raymond	MODEL-BASED ADAPTIVE KINEMATIC TRANSFORMATION FOR MULTI DEGREE-OF-FREEDOM HYBRID FIRE SIMULATION WITH ONGOING HIGH TEMPERATURE TEST DEVELOPMENT
Ma, Saidong	Performance-Based Design of Passive Fire Protection for Steel Bridge Girders
Madhavan, Mahendrakumar	Experimental Investigation of the beam-to-column CFS shear connector subjected to fire
Madheswaran, Ranjithkumar	Experimental Investigation of the beam-to-column CFS shear connector subjected to fire
Mai, Thi Thuy	Experimental and Numerical Study of Fusible Links Using Aluminium Bolts in Single-Storey Buildings
Main, Joseph	Computational Modeling of Steel Gravity Frames with Composite Floor Systems in Fire
Malaska, Mikko	Experimental study on cross-laminated timber panels exposed to parametric fires Fire resistance of CLT-slab in a natural fire including cooling phase - experimental study and comparison to numerical analysis
Malik, Manisha	Strength Estimation in Concrete Exposed to Elevated Temperature through Pore Size Distribution
Manes, Martina	A numerical study on the axial force development at beam-end shear connections during a large compartment fire experiment
Mareš, Jiří	Full-Scale Fire Test of a Steel Portal Frame Hall: Experimental and Numerical Findings
Margnelli, Alessandro	Simulating the Contribution of Exposed Cross-Laminated Timber Ceilings to Enclosure Fire Dynamics using the FDS SPyro Model
Martins-Robalino, Austin	Investigation into Mechanical Response and Explosive Spalling of Fibre Reinforced UHPC Beams Subjected to Localised Fires
Mashiri, Fidelis	Fire performance of PCM-incorporated concrete
Matias de Paula Filho, José Humberto	Timber and Cold-Formed Steel Housing: Structural Fire Behavior and Cluster Vulnerability in the WUI
Matsagar, Vasant	Cement Mortar Modified with Hybrid Carbon Nano Tube - Reduced Graphene Oxide Mix at Elevated Temperature
Mauro, Brigida	Structural fire response of an arch-suspended steel roof in an ice stadium
Meacham, Brian	Modeling of Post-Earthquake Fire Response of a Full-Scale CFS Building
Meng, Fanqin	Design for Structural Fire Resistance Recommendations to be Incorporated into the New Zealand Steel Structure Design Standard of DZ 3404
Mensinger, Martin	Timber Claddings as Fire Protection for Steel Columns: Experimental Study and Practical Design Rules Fire Behavior of Novel Connections to CFST Columns with Steel Core
Merci, Bart	Eurocode Parametric Fire Curves: Improved Formulation for the Fire Decay and Cooling Phases
Miano, Andrea	Multihazard vulnerability assessment of reinforced concrete bridge piers subjected to earthquake and fire Fire fragility functions of bridges subjected to vehicle fire scenarios Fragility-based cost-benefit methodology for the fire assessment of steel structures Seismic vulnerability assessment of fire damaged RC buildings
Mignemi, Giulia	Thermomechanical analysis of a precast concrete industrial frame structure subjected to jet fires
Min, Jeong-Ki	Fire Performance of Unprotected Modular Steel Buildings with Gypsum Board Ceilings Fire-Induced Thermal Responses of CFT Columns Using FDS-ABAQUS Coupled Analysis under Real-Scale Compartment Fires Fire Behavior of Protected Composite Beams Filled with Concrete
Ming, Xiyue M.	A numerical study on the axial force development at beam-end shear connections during a large compartment fire experiment
Minieri, Sara	Multihazard vulnerability assessment of reinforced concrete bridge piers subjected to earthquake and fire Multi-hazard analysis of buildings exposed to earthquake and fire using OpenSees Fire fragility assessment of steel industrial buildings
Mirza, Olivia	Fire performance of PCM-incorporated concrete
Mladenova, Lilyana	Analysis of the Charring Behaviour of Heritage Timber using Digital Image Correlation
Molkens, Tom	Parametric temperature-time curves: Recommended modifications, validation, and limitations
Mollakhalili, Arian	Real-time hybrid fire simulation of a steel moment-resisting frame under post-earthquake fire
Mora, Paul S.	Experimental investigation on the fire performance of demountable steel-timber composite beams with sustainable passive protection
Morovat, Mohammed	Computational Modeling of Steel Gravity Frames with Composite Floor Systems in Fire
N
Nadjai, Ali	Impact of Travelling Fires on Collapse Mechanisms of Steel Structures with Non-Uniform Temperature Distribution
Namin, Ali	Interpretable machine learning for predicting the fire resistance of performance-based composite floor systems
Nan, Zhuojun	The wind effect on the disproportionate collapse of an open-sided steel-concrete composite floor car park in travelling fires A numerical study on the axial force development at beam-end shear connections during a large compartment fire experiment Prediction of Fire-Induced Temperatures in Steel-Concrete Composite Sections using Data-Driven Machine Learning A Progressive Peformance-based Structural Fire Engineering Framework: From Simulation-Based Design to GNN-Based Design
Naser, M. Z.	Towards Data-Driven and Explainable AI for Structural Fire Safety: Predicting Bond Performance at Elevated Temperatures
Nassiri, Parisa	PERFORMANCE-BASED FIRE DESIGN OF STEEL-TIMBER CONNECTIONS: A CASE STUDY
Nassiri, Ramin	Experimental study on the effect of infill concrete in reducing the amount of fire protection system required for hollow steel columns
Neugum, Tim	Fire resistance of thermally restrained steel-reinforced concrete columns
Nguyen, Thanh Kien	Steel Profiled Sheeting Fire Resistance Tests: Extended Experimental Results and Future Proposals
Ni, Shuna	Quantifying Uncertainty in High-Temperature Mechanical Properties of Cold-Formed Steel for Reliability-Informed Fire Design EXPERIMENTAL STUDY ON FIRE-INDUCED COLLAPSE OF TIMBER STRUCTURES AND ITS IMPACT ON FIRE DYNAMICS
Nigro, Emidio	Multihazard vulnerability assessment of reinforced concrete bridge piers subjected to earthquake and fire Multi-hazard analysis of buildings exposed to earthquake and fire using OpenSees Analysis of Explosive Spalling in Tunnel Linings Exposed to Fire: The Role of Fiber-Reinforced Concrete Fire fragility functions of bridges subjected to vehicle fire scenarios Fragility-based cost-benefit methodology for the fire assessment of steel structures Fire fragility assessment of steel industrial buildings Fire behaviour of RC members strengthened with external steel plates: a review Fire assessment of r.c. building trough fragility curves Seismic vulnerability assessment of fire damaged RC buildings
Nishimura, Toshihiko	Experimental study on unprotected steel tubular column filled with steel-fibre-reinforced high-strength concrete at elevated temperatures
Niu, Yu	Modeling of Post-Earthquake Fire Response of a Full-Scale CFS Building Computational modeling of timber columns subjected to furnace and compartment fire tests
Niu, Yu	Timber and Cold-Formed Steel Housing: Structural Fire Behavior and Cluster Vulnerability in the WUI
Noor, Aqsa	A Numerical Investigation of Post-Earthquake Fire Performance of Mass Timber Moment Frames
O
O'Loughlin, Eoin	Framework for Quantified Risk Assessment of Bridge Fire Safety
Ojala, Aleksi	Fire resistance of CLT-slab in a natural fire including cooling phase - experimental study and comparison to numerical analysis
Orabi, Anwar	Prediction of Fire-Induced Temperatures in Steel-Concrete Composite Sections using Data-Driven Machine Learning A Progressive Peformance-based Structural Fire Engineering Framework: From Simulation-Based Design to GNN-Based Design
Ouellet-Plamondon, Claudiane	Fire Behavior of Hempcrete with Partial Lime Replacement by Natural Pozzolan
Ozawa, Mitsuo	INFLUENCE OF COMPRESSIVE STRENGTH ON FIRE-INDUCED SPALLING DEPTH OF CONCRETE EVALUATED BY A RING‑RESTRAINED HEATING TEST Comparison of Spalling Depths Obtained by the Ring-Constrained Heat Test and by Heat Tests of Various RC and PC Members
P
Pagan-Martinez, Juan Jose	Parametric numerical study of Y-shaped steel columns in fire
Pagan-Martinez, Juan Jose	Parametric analysis of hot spotting when considering coat-backs to steel hollow framing into open sections under fire exposure Parametric analysis of thermal-induced second order stresses in steel beams under fire exposure
Palermo, Dan	Investigation into Mechanical Response and Explosive Spalling of Fibre Reinforced UHPC Beams Subjected to Localised Fires
Panev, Yavor	Framework for Quantified Risk Assessment of Bridge Fire Safety Structural Fire Response to Multi-storey Fires
Park, Jamin	MODEL-BASED ADAPTIVE KINEMATIC TRANSFORMATION FOR MULTI DEGREE-OF-FREEDOM HYBRID FIRE SIMULATION WITH ONGOING HIGH TEMPERATURE TEST DEVELOPMENT
Park, Min Jae	Comparative Analysis of Structural Fire Design for Steel and Composite Structures: Case Studies in Korea with Fire-Resistant Steel Predicting Steel Temperatures of Beams and Columns in Modular Buildings Using Full-Scale Tests and Numerical Heat Transfer Analysis Predicting Thermal Actions from ICEV and EV Localised Fires Using Conical and Cylindrical Flame Models Numerical Analysis on Structural Fire Behavior of Rectangular CFT Columns with Different Aspect Ratios
Pathirana, Sameera	Fire performance of PCM-incorporated concrete
Payá-Zaforteza, Ignacio	Parametric numerical study of Y-shaped steel columns in fire
Peng, Mengying	Time-dependent model uncertainty quantification for thermo-mechanical analysis
Perrone, Daniele	Seismic vulnerability assessment of fire damaged RC buildings
Phan, Long	Computational Modeling of Steel Gravity Frames with Composite Floor Systems in Fire
Philion, Ethan	Thermal Propagation and Post-fire Flexural Performance of Cross-laminated Timber Exposed to a Localized Fire
Pinto, Gabriele	Seismic vulnerability assessment of fire damaged RC buildings
Polishchuk, Evgeny	Steel Profiled Sheeting Fire Resistance Tests: Extended Experimental Results and Future Proposals
Possidente, Luca	Structural fire response of an arch-suspended steel roof in an ice stadium
Premkumar, N	Fireproofing through Waterproofing: A Novel Vermiculite Mortar System for Fire Protection of FRP Strengthened RC Members
Protcenko, Zena	Structural Fire Response to Multi-storey Fires
Put, Florian	Eurocode Parametric Fire Curves: Improved Formulation for the Fire Decay and Cooling Phases Assessing various techniques for the post-fire assessment of concrete structures
Q
Qi, Honghui	Quantifying Uncertainty in High-Temperature Mechanical Properties of Cold-Formed Steel for Reliability-Informed Fire Design EXPERIMENTAL STUDY ON FIRE-INDUCED COLLAPSE OF TIMBER STRUCTURES AND ITS IMPACT ON FIRE DYNAMICS
Qiang, Xuhong	Behavior of cyclically-damaged Fe-SMA and structural steels in fire Behavior of bolted connections between Fe-SMA and steel in fire Fire Performance of Fe-SMA Materials and Steel Joints Assembled with Fe-SMA Bolts
Quiel, Spencer	Performance-Based Design of Passive Fire Protection for Steel Bridge Girders
Qureshi, Ramla Karim	Real-time hybrid fire simulation of a steel moment-resisting frame under post-earthquake fire Probabilistic models for density and thermal properties of timber at elevated temperatures A Numerical Investigation of Post-Earthquake Fire Performance of Mass Timber Moment Frames
R
Rahnavard, Rohola	CALIBRATION OF A DUCTILE FRACTURE MODEL FOR COLD-FORMED STEEL AT ELEVATED TEMPERATURES
Rahnvard, Rohola	CONCRETE-FILLED COLD-FORMED (CF-CFS) STEEL COMPOSITE COLUMNS AT ELEVATED TEMPERATURE
Rajab, Riad	Investigation into Mechanical Response and Explosive Spalling of Fibre Reinforced UHPC Beams Subjected to Localised Fires
Rawool, Tejas	EXPERIMENTAL STUDY ON FIRE-INDUCED COLLAPSE OF TIMBER STRUCTURES AND ITS IMPACT ON FIRE DYNAMICS
Reggiani Manzo, Natalia	On the fire resistance of granite columns
Renard, Silvio	Parametric Experimental And Numerical Study On Rc Columns Stability During Natural Fire
Renaud, Christophe	Numerical investigation of a Steel–Concrete composite (SC) floor exposed to ISO 834 standard fire Experimental and Numerical Study of Fusible Links Using Aluminium Bolts in Single-Storey Buildings
Ricci, Federica	Fragility functions of a steel pipe rack under wilfire scenarios
Robert, Fabienne	Parametric Experimental And Numerical Study On Rc Columns Stability During Natural Fire
Rokade, Mahadev	Performance of Low-Cement Concrete (LCC) During the Cooling Phase of Fire: Residual Strength Assessment
Romero, Manuel L.	Experimental investigation on the fire performance of demountable steel-timber composite beams with sustainable passive protection
Roosefid, Mohsen	Numerical investigation of a Steel–Concrete composite (SC) floor exposed to ISO 834 standard fire
Ru, Chenhao	Numerical simulation of post-tensioned concrete bridges exposed to fire considering the effects of bonding and spalling
Rusarova, Simona	Full-Scale Fire Test of a Steel Portal Frame Hall: Experimental and Numerical Findings Performance-Based Fire Modelling of Steel Frames Using CBFEM Coupled Model for Charring and Crack Evolution in Timber under Fire Exposure
Rush, Dave	Performance of Low-Cement Concrete (LCC) During the Cooling Phase of Fire: Residual Strength Assessment
Rutkauskas, Lukas	PERFORMANCE-BASED FIRE DESIGN OF STEEL-TIMBER CONNECTIONS: A CASE STUDY
Ryu, Eun-Mi	Evaluation of High-Temperature Properties and Fire Resistance of Unprotected SHN355FR Steel Columns
S
Sadakane, Toshihide	AN INVESTIGATION OF EXPLOSIVE SPALLING OF CONCRETE EXPOSED TO FIRE NUMERICAL STUDY ON THERMAL STRESS IN HIGH-STRENGTH CONCRETE INDUCED BY WATER VAPOR PRESSURE UNDER FIRE EXPOSURE.
Sadek, Fahim	Computational Modeling of Steel Gravity Frames with Composite Floor Systems in Fire
Saed, Ghazal	Real-time hybrid fire simulation of a steel moment-resisting frame under post-earthquake fire
Sah, Manish	: NUMERICAL MODEL FOR EVALUATING FIRE PERFORMANCE OF POLYMERIC CONCRETE BEAMS
Saharan, Nisha	Timber and Cold-Formed Steel Housing: Structural Fire Behavior and Cluster Vulnerability in the WUI
Saito, Mami	Experimental study on unprotected steel tubular column filled with steel-fibre-reinforced high-strength concrete at elevated temperatures
Sakai, Satoru	EXPERIMENTAL STUDY ON RESIDUAL PULL-OUT BEHAVIOR OF POST-INSTALLED METAL ANCHORS AFTER FIRE EXPOSURE
Salehi, Hadi	Machine Learning–Based Prediction of Fire Resistance and Failure Modes of Steel Connections: A Multi-Study Experimental Synthesis with Code Comparison
Salem, Sam	Experimental Evaluation of Geopolymer-based FRCM versus the Conventional Gypsum Board Encapsulation for Fire Protection of Mass Timber Retrofitting Fire-Damaged Glulam Beams using Fabric-Reinforced Cementitious Matrix (FRCM) System Fire Performance of Full-Size Mass Timber Glued-in Rod (GIR) Connections Fire Performance of Mass Timber Beam-to-Column Concealed, Interlocking Connections
Salenikovich, Alexander	Effect of Gap Size and Grain Orientation on Fire Performance of Mass Timber Joints
Salminen, Mikko	Fire resistance of CLT-slab in a natural fire including cooling phase - experimental study and comparison to numerical analysis
Salzano, Ernesto	Fragility functions of a steel pipe rack under wilfire scenarios
Santiago, Aldina	CALIBRATION OF A DUCTILE FRACTURE MODEL FOR COLD-FORMED STEEL AT ELEVATED TEMPERATURES PERFORMANCE-BASED DESIGN OF STEEL STRUCTURES AT THE WILDLAND-URBAN INTERFACE: A COUPLED CFD-FEM METHODOLOGY CONCRETE-FILLED COLD-FORMED (CF-CFS) STEEL COMPOSITE COLUMNS AT ELEVATED TEMPERATURE Fire Safety Assessment of Steel Frames with Dissipative Beam-to-Column Joints
Santos, Ana Francisca	Fire Safety Assessment of Steel Frames with Dissipative Beam-to-Column Joints
Sarhat, Salah	Residual Shear Transfer Strength of Steel Fibre-Reinforced Concrete after Exposure to Elevated Temperatures
Sayad, Saba	A Comprehensive Numerical Approach for the Analysis of Deep Tunnels in Fire Conditions
Schafer, Benjamin	Modeling of Post-Earthquake Fire Response of a Full-Scale CFS Building
Schwendner, Constantin	Timber Claddings as Fire Protection for Steel Columns: Experimental Study and Practical Design Rules Fire Behavior of Novel Connections to CFST Columns with Steel Core
Scott, Allan	Strength of Woodcrete under fire conditions
Sejna, Jakub	Performance-Based Fire Modelling of Steel Frames Using CBFEM Coupled Model for Charring and Crack Evolution in Timber under Fire Exposure
Selamet, Serdar	Timber and Cold-Formed Steel Housing: Structural Fire Behavior and Cluster Vulnerability in the WUI
Shakalis, Andrew	Characterizing Fire and Gas-Release Behavior in Electric Buses and Implications for Structural Fire Engineering Practice
Shamaim Ali, Syed Muhamad	Simplified method to predict the failure of wood truss floor assemblies in fire
Shewalul, Yohannes	Consequence assessment of structures exposed to gas transmission pipeline rupture-induced fire
Shin, Dongjin	Evaluation of High-Temperature Properties and Fire Resistance of Unprotected SHN355FR Steel Columns
Shin, Jinwon	Fire Behavior of Protected Korean Square CFT Columns Fire-Induced Thermal Responses of CFT Columns Using FDS-ABAQUS Coupled Analysis under Real-Scale Compartment Fires
Shintani, Yusuke	Experimental study on unprotected steel tubular column filled with steel-fibre-reinforced high-strength concrete at elevated temperatures
Shrestha, Anuska	Machine Learning–Based Prediction of Fire Resistance and Failure Modes of Steel Connections: A Multi-Study Experimental Synthesis with Code Comparison
Sian Das Neves, Natan	Behaviour and DSM Design of CFS Beams Undergoing Distortional-Global Interaction at Elevated Temperatures
Sigurðardóttir, Dórótea	Incorporating spalling uncertainty into fire-induced damage analysis of concrete structures
Simões da Silva, Luís	Fire Safety Assessment of Steel Frames with Dissipative Beam-to-Column Joints
Singh, Amandeep	Cement Mortar Modified with Hybrid Carbon Nano Tube - Reduced Graphene Oxide Mix at Elevated Temperature
Singh, Smita	Effect of Fibre Reinforcement in Concrete on the Post Earthquake Fire Resistance of CFST Columns
Smith, Matthew	Fire Performance of Biaxial Steel Shear Tab Connections
Solhmirzaei, Roya	Machine Learning–Based Prediction of Fire Resistance and Failure Modes of Steel Connections: A Multi-Study Experimental Synthesis with Code Comparison
Song, Ci	Experimental study on the mechanical performance of grouted sleeve splices of high-strength rebar after exposure to high temperatures
Song, Lin-Xin	Effects of pre-tensile stress on post-fire mechanical properties of Q460 high strength structural steel
Stelzner, Ludwig	Fire resistance of thermally restrained steel-reinforced concrete columns On the fire resistance of granite columns Behaviour of CFRP-reinforced Concrete at Elevated Temperatures
Stratford, Tim	Performance of Low-Cement Concrete (LCC) During the Cooling Phase of Fire: Residual Strength Assessment
Su, Joseph	Experimental Study of Mass Timber Compartment Fire Dynamics on Building Construction Sites
Suda, Momoi	Structural Fire Response to Multi-storey Fires
Suk, Chan-Ho	Evaluation of High-Temperature Properties and Fire Resistance of Unprotected SHN355FR Steel Columns
Sun, Rui	A numerical study on the axial force development at beam-end shear connections during a large compartment fire experiment
T
Tajik, Nima	Post-fire behavior of reinforced concrete beams: effects of full burnout and bond degradation Incorporating spalling uncertainty into fire-induced damage analysis of concrete structures
Tan, Isaac	The wind effect on the disproportionate collapse of an open-sided steel-concrete composite floor car park in travelling fires
Tan, Kang Hai	Deep Learning Model for Heat Transfer Analysis in Concrete Structures under Fire Predicting fire endurance of shear-critical fibre-reinforced lightweight aggregate concrete continuous beams through strut-and-tie approach
Tao, Zhong	A Generalised Stress–Strain Model for Structural Stainless Steels at Elevated Temperatures
Teoh, Bak Koon	Predicting fire endurance of shear-critical fibre-reinforced lightweight aggregate concrete continuous beams through strut-and-tie approach
Tesfamariam, Solomon	Consequence assessment of structures exposed to gas transmission pipeline rupture-induced fire
Thienpont, Thomas	Numerical Post-fire Damage Quantification of Concrete Tunnels Full-Scale Investigation of Shear Failure Mechanisms in Reinforced Concrete Beams Under Fire Loading Assessing various techniques for the post-fire assessment of concrete structures
Threlfall, James	Analysis of the Charring Behaviour of Heritage Timber using Digital Image Correlation
Tian, Xiu-Quan	Stochastic damage mechanics of fire-exposed concrete: Constitutive modeling and structural collapse prediction
Tondini, Nicola	Structural fire response of an arch-suspended steel roof in an ice stadium Multi-hazard analysis of buildings exposed to earthquake and fire using OpenSees Fragility functions of a steel pipe rack under wilfire scenarios Fire fragility functions of bridges subjected to vehicle fire scenarios Combination of two-zone and localised fire models for performance-based fire design of single-storey steel industrial hall
U
Usmani, Asif	AI-Enhanced Beam-Column Elements for Efficient System-Level Fire Analysis A Thermo-Mechanical Analysis of the Gretzenbach Flat Slab Parking Structure Analysis of an Axisymmetric Plate in the Context of Stress Concentration-Induced Punching Shear An Investigation of Explosive Spalling in Concrete: Is Pore Pressure More Important or Thermally Induced Stress Prediction of Fire-Induced Temperatures in Steel-Concrete Composite Sections using Data-Driven Machine Learning A Progressive Peformance-based Structural Fire Engineering Framework: From Simulation-Based Design to GNN-Based Design
V
Van Coile, Ruben	Numerical Post-fire Damage Quantification of Concrete Tunnels Reliability-based assessment of the zero-strength layer in the design of timber structures exposed to fire Eurocode Parametric Fire Curves: Improved Formulation for the Fire Decay and Cooling Phases Full-Scale Investigation of Shear Failure Mechanisms in Reinforced Concrete Beams Under Fire Loading The role of furnace testing for performance-based design and future regulations Time-dependent model uncertainty quantification for thermo-mechanical analysis Safety format for the design of protected steel columns for burnout resistance
Vargas, Daniel	TENSILE PROPERTIES OF ULTRA HIGH-PERFORMANCE CONCRETE AT STEADY STATE ELEVATED TEMPERATURES NUMERICAL INVESTIGATION OF ULTRA-HIGH PERFORMANCE CONCRETE DOUBLE-WYTHE INSULATED WALL PANELS EXPOSED TO FIRE
Venkatachari, Svetha	Cement Mortar Modified with Hybrid Carbon Nano Tube - Reduced Graphene Oxide Mix at Elevated Temperature
Verki, Amir M.	Fire Performance of Full-Size Mass Timber Glued-in Rod (GIR) Connections
Vila Real, Paulo	Fire resistance of steel I-beams subjected to lateral torsional buckling considering non-uniform temperatures distribution Numerical investigation on the failure modes of cellular steel beams under combined axial force and bending moments at elevated temperature
W
Wald, Frantisek	Full-Scale Fire Test of a Steel Portal Frame Hall: Experimental and Numerical Findings Performance-Based Fire Modelling of Steel Frames Using CBFEM
Wang, Weiyong	Experimental research on the fire resistance performance of end restrained high-strength steel-concrete composite beams
Wang, Xing-Qiang	A Generalised Stress–Strain Model for Structural Stainless Steels at Elevated Temperatures
Wang, Yong	Towards Data-Driven and Explainable AI for Structural Fire Safety: Predicting Bond Performance at Elevated Temperatures
Wang, Yuanzuo	Study on Fracture Ductility of Q460 Steel under Complex Stress States at High Temperatures
Wang, Yuchen	Prediction of Fire-Induced Temperatures in Steel-Concrete Composite Sections using Data-Driven Machine Learning A Progressive Peformance-based Structural Fire Engineering Framework: From Simulation-Based Design to GNN-Based Design
Wang, Yuhan	Behavior of cyclically-damaged Fe-SMA and structural steels in fire
Watson, David	Simulating the Contribution of Exposed Cross-Laminated Timber Ceilings to Enclosure Fire Dynamics using the FDS SPyro Model
Weigand, Jonathan	Computational Modeling of Steel Gravity Frames with Composite Floor Systems in Fire
Williamson, Paul	Characterizing Fire and Gas-Release Behavior in Electric Buses and Implications for Structural Fire Engineering Practice
Winter, Stefan	Timber Claddings as Fire Protection for Steel Columns: Experimental Study and Practical Design Rules
Wong, Ming Chun	An Investigation of Explosive Spalling in Concrete: Is Pore Pressure More Important or Thermally Induced Stress
Woods, Joshua	TENSILE PROPERTIES OF ULTRA HIGH-PERFORMANCE CONCRETE AT STEADY STATE ELEVATED TEMPERATURES NUMERICAL INVESTIGATION OF ULTRA-HIGH PERFORMANCE CONCRETE DOUBLE-WYTHE INSULATED WALL PANELS EXPOSED TO FIRE
Wu, Xiqiang	Numerical simulation of post-tensioned concrete bridges exposed to fire considering the effects of bonding and spalling
X
Xiao, Shun	Experimental study on the mechanical performance of grouted sleeve splices of high-strength rebar after exposure to high temperatures
Xu, Qingfeng	Experimental study on the mechanical performance of grouted sleeve splices of high-strength rebar after exposure to high temperatures
Y
Yagami, Keisuke	EXPERIMENTAL STUDY ON REINFORCEMENT-CONCRETE BOND AND SLIP AT ELEVATED TEMPERATURES
Yamazaki, Kenta	EXPERIMENTAL STUDY ON RESIDUAL PULL-OUT BEHAVIOR OF POST-INSTALLED METAL ANCHORS AFTER FIRE EXPOSURE
Yan, Wenxu	Study on fire resistance performance and design of partially encased steel-concrete composite columns
Yan, Xia	Quantifying Uncertainty in High-Temperature Mechanical Properties of Cold-Formed Steel for Reliability-Informed Fire Design
Yang, Dongdong	Structural fire performance of square STCRC columns under non-uniform heating conditions
Yang, Hua	Structural fire performance of square STCRC columns under non-uniform heating conditions
Yarmohammadian, Ramin	Full-Scale Investigation of Shear Failure Mechanisms in Reinforced Concrete Beams Under Fire Loading The role of furnace testing for performance-based design and future regulations Assessing various techniques for the post-fire assessment of concrete structures
Ye, Jihong	Modeling of Urban Fire Spread: Development of an Integrated CA-Unity Simulation Framework
Ye, Kai	POST-FIRE MATERIAL PROPERTIES OF PRE-STRAINED JIS SN400B STEEL: EXPERIMENTAL STUDY
Ye, Kai	AN INVESTIGATION OF EXPLOSIVE SPALLING OF CONCRETE EXPOSED TO FIRE EXPERIMENTAL STUDY ON REINFORCEMENT-CONCRETE BOND AND SLIP AT ELEVATED TEMPERATURES NUMERICAL STUDY ON THERMAL STRESS IN HIGH-STRENGTH CONCRETE INDUCED BY WATER VAPOR PRESSURE UNDER FIRE EXPOSURE.
Yedinak, Kara	Experimental and Numerical Investigation of Plastic Hinging of Fasteners in CLT Balloon-Frame Connections: Insights from the WOODWISE Large-Scale Compartment Fire Tests
Yeo, Inhwan	Temperature Distribution Assessment of GIR Column-Beam Connections for Mid- to High-Rise Timber Building
Yin, Fei	Post-fire mechanical properties of corroded Q235 steel under different cooling regimes
Yusuf, Md.	Residual Shear Transfer Strength of Steel Fibre-Reinforced Concrete after Exposure to Elevated Temperatures
Z
Zaker Esteghamati, Mohsen	Interpretable machine learning for predicting the fire resistance of performance-based composite floor systems
Zehfuß, Jochen	Fire resistance of thermally restrained steel-reinforced concrete columns Fire Behavior of Novel Connections to CFST Columns with Steel Core
Zhang, Chao	AI-driven natural fire testing method: concept and experimental exploration
Zhang, Linbo	Post-fire mechanical properties of corroded Q235 steel under different cooling regimes
Zhang, Linbo	Strength Estimation in Concrete Exposed to Elevated Temperature through Pore Size Distribution
Zhang, Shuai	An Investigation of Explosive Spalling in Concrete: Is Pore Pressure More Important or Thermally Induced Stress
Zhao, Bin	Experimental and Numerical Study of Fusible Links Using Aluminium Bolts in Single-Storey Buildings
Zheng, Enyi	STUDY ON POST-FIRE MECHANICAL PROPERTIES OF Q370QD BRIDGE STEEL
Zheng, Xiaofeng	Study on fire resistance performance and design of partially encased steel-concrete composite columns
Zheng, Xiuzhi	Performance-based structural fire design of large-span timber structures: new concept, research and application
Zhou, Hao	Stochastic damage mechanics of fire-exposed concrete: Constitutive modeling and structural collapse prediction
Zhu, Shaojun	Performance-based structural fire design of large-span timber structures: new concept, research and application
Zhu, Zheda	Performance-Based Design of Passive Fire Protection for Steel Bridge Girders
Zidlicky, Bretislav	Full-Scale Fire Test of a Steel Portal Frame Hall: Experimental and Numerical Findings Performance-Based Fire Modelling of Steel Frames Using CBFEM
Zubek, Mya	Incorporating spalling uncertainty into fire-induced damage analysis of concrete structures

Disclaimer | Powered by EasyChair Smart Program