PYRO2026: 25TH INTERNATIONAL SYMPOSIUM ON ANALYTICAL AND APPLIED PYROLYSIS

A
A. Gadhi, Tanveer	Iron tailored biochar for waterborne bacteriar treatment
Abbaspour, Nastaran	Fluidised-bed pyrolysis of contaminated biomass – process parameters and product analysis
Abbott, Geoffrey D.	Chemical markers for tyre wear particles using pyrolysis-GC-MS
Abdelouahed, Lokmane	A Robust NLSM-Based Kinetic Approach for Pyrolysis Valorization: Application to Polymers, Biopolymers, and Biomass
Abderafi, Souad	A Robust NLSM-Based Kinetic Approach for Pyrolysis Valorization: Application to Polymers, Biopolymers, and Biomass
Abdolrahimi, Maryam	Evolution of Magnetic and Paramagnetic Behavior in Pyrolyzed Bamboo: Influence of Thermal Treatment and Iron Incorporation
Acha Peña, Esther	Zeolite Catalysed Upgrading of CFRP Pyrolysis Vapours for Enhanced Hydrogen Production
Achilias, Dimitris	Chemical recycling of nylon-6 via catalytic pyrolysis for the selective recovery of ε-caprolactam
Acocella, Maria Rosaria	Effect of pyrolysis temperature on the Cristal Violet adsorption performance of ball-milled functionalized biochar
Adachi, Koji	Enhanced Processing Ability with a Newly Designed Underwater Microparticle Collection Device for Pyrolysis-GC/MS of Microplastics
Adessi, Alessandra	Integrating Hydrothermal Treatment and Microalgal Cultivation for Brewery Spent Grains Valorization
Aerts, Michiel	Reliability of milligram-scale high-throughput screening for evaluating polyolefin chemical recycling in the melt with heterogeneous catalysis
Aerts, Michiel	Catalytic pyrolysis of polystyrene over zeolite materials toward BTEC fraction production
Afanasiev, Pavel	Catalytic hydrotreatment efficiency on HTL biocrudes from two microalgae strains, Chlorella sorokiniana and Chlorella vulgaris, evidenced by FT-ICR MS
Agar, David A.	Pyrolytic modification of wood enhances its cascaded use Valorisation of reindeer bone via pyrolysis: Product distribution and characterisation for environmental applications
Agostino, Valeria	Spent coffee biochar contained poly(dimethylsiloxane) composites as membranes for gas separation
Ahmed Memon, Israr	Iron tailored biochar for waterborne bacteriar treatment
Aissaoui, Mohamed Hechmi	Effect of steam and solid residence time on wood pyrolysis-gasification products Improving the determination of atomic mass balances of biochars produced from biomass pyrolysis Synthesis, characterization and catalytic activity in dry reforming reaction of Ni/C catalysts prepared from different biomasses
Akai, Ren	Gas-phase thermal stability of levoglucosenone derived from biomass pyrolysis
Akaike, Kaori	Inline High-Sensitivity Analysis of Brominated Pyrolysates from TBBPA-Containing Polystyrene Using Py-GC/NICI-MS
Akbi, Hamdane	Synthesis and characterization of a promising energetic nitrochitosan
Akin, Oguzhan	Reliability of milligram-scale high-throughput screening for evaluating polyolefin chemical recycling in the melt with heterogeneous catalysis
Aktas, Turkan	Characterization and Antifungal Activity of Wood Vinegar Produced from Slow Pyrolysis of Canola Stalk Residual Energy Recovery from Digestate via Py-AD approach: Water-soluble fraction of Bio-oil as Feedstock and its Molecular Characterization by Silylation-GC-MS
Akçay, Tamer	Characterization and Antifungal Activity of Wood Vinegar Produced from Slow Pyrolysis of Canola Stalk
Alejandro-Martín, Serguei	Exploring the role of Acid-modified and Metal (Ni, Co, Ni/Co) impregnated Chilean Natural Zeolite during Catalytic Co-Hydropyrolysis of Biomass/Plastics Catalytic co-hydropyrolysis of biomass/plastic over Chilean natural zeolite modified with acid and impregnated with mono- and bimetallic nickel - cobalt Thermo-metallic engineering of MOF-derived catalysts: Influence on selectivity during biomass-plastic co-hydropyrolysis
Alexandrino, Katiuska	Soot formation and polycyclic aromatic hydrocarbons in soot during p-cymene pyrolysis
Alkoussa, Jana	Biomass pyrolysis in a fixed-bed reactor: effect of pressure and sweep gas velocity
Almeida Azevedo, Débora	Advanced molecular elucidation of biogenic contributions from pyrolysis bio-oil co-processed in conventional refining: a viable and sustainable pathway for the energy transition.
Alper, Koray	Impact of process conditions on hydrochars derived from the hydrothermal carbonization of goat manure
Alrini, Kussai	Residual Energy Recovery from Digestate via Py-AD approach: Water-soluble fraction of Bio-oil as Feedstock and its Molecular Characterization by Silylation-GC-MS
Alsharqawi, Razan	Impact of Minerals on the Pyrolysis Behavior and Product Distribution of Polystyrene
Alvarez, Jon	Steam Cracking of HDPE over different FCC Catalysts in a Fountain-Enhanced Conical Spouted Bed Reactor
Alvira, Darío	Sustainable valorisation of almond residues to hard carbon cathodes for aqueous zinc hybrid supercapacitors Thermochemical synthesis of tin-containing hard carbons from waste hemp hurd for sodium-ion battery anodes
Alzueta, María U.	Soot formation and polycyclic aromatic hydrocarbons in soot during p-cymene pyrolysis
Amato, Davide	Heating rate and solid residence time effects on carbon transformation pathways in slow and fast pyrolysis of woody and herbaceous residues Experimental investigation of non-catalytic dry reforming of representative bio-oil compounds Effects of phase separation and storage temperature in slow pyrolysis bio-oils: insights from a 145-days monitoring study Turning agro-industrial pruning residues into biochar: insights from slow pyrolysis and value chain analysis Effect of blends of hydrochar and straw during co-pyrolysis for biochar production Slow pyrolysis under recirculated exhaust gas atmospheres: effect of steam on biochar and co-products
Amutio, Maider	Hydrogen and syngas production from plastic waste pyrolysis and in line sorption enhanced steam reforming Evaluation of operating conditions on the pyrolysis and in-line catalytic cracking of HDPE over a ZSM5 zeolite catalyst Performance of Ni/Al₂O₃, Ni/SiO₂, and Ni/ZrO₂ in the biomass pyrolysis and in-line oxidative steam reforming process for hydrogen production Steam Cracking of HDPE over different FCC Catalysts in a Fountain-Enhanced Conical Spouted Bed Reactor
Améduri, Bruno	Extending the Analytical Power of Applied Pyrolysis for Polymers through Online FT-ICR MS Analysis of Heavy Thermo-desorption and Pyrolysis Products
An, Taehwi	Acid Washing and Carbonization of Biomass Bottom Ash for Recycling into Bio-coke Co-pyrolysis Characteristics of Polyethylene and Biomass in a Bubbling Fluidized Bed
Angel Smith, Sarah	Hydropyrolysis: towards fluorescence-free Raman analysis of internal diesel injector deposits
Antonetti, Claudia	Conversion of hazelnut shell waste into hard carbon materials for the sustainable production of hybrid capacitors Pyrolysis of marine biomasses with different heating technologies: The case of study of Posidonia Oceanica fibrous spheres
Antorán, Daniel	Sustainable valorisation of almond residues to hard carbon cathodes for aqueous zinc hybrid supercapacitors Thermochemical synthesis of tin-containing hard carbons from waste hemp hurd for sodium-ion battery anodes
Apicella, Barbara	Pyrolysis-Driven Combustion of Polylactic Acid in Hybrid Aerospace Propulsion
Apicella, Barbara	Exploiting Fast Pyrolysis Conditions for one-step synthesis of Carbon Dots from Biomass
Apsokardu, Michael	Characterization and Quantification of Microplastics in Water in Mid-Atlantic Watersheds in the United States by Pyrolysis GC-MS
Arango Durango, Eduardo	Spatial evolution of mineral phases within pine bark particles during pyrolysis under inert and weakly oxidizing atmospheres
Arauzo, Pablo J.	Structure–Performance Relationships in Ni/C Catalysts for Power-to-Gas Applications
Areeprasert, Chinnathan	Effect of Pyrolysis Kiln Design on the Structural and Chemical Formation of Macadamia Nut Shell Biochar for Iron-Based Surface Functionalisation
Arenas, Cindy Natalia	Exploring the thermochemical recycling of polystyrene waste using thermo-oxidative degradation
Aresi, Chiara Barbara	Experimental and Modelling Investigation of Primary and Secondary Reactions in LDPE Pyrolysis
Arias, Stephanie	Hydrogen and syngas production from plastic waste pyrolysis and in line sorption enhanced steam reforming Performance of Ni/Al₂O₃, Ni/SiO₂, and Ni/ZrO₂ in the biomass pyrolysis and in-line oxidative steam reforming process for hydrogen production
Ariemma, Giovanni Battista	Experimental investigation of non-catalytic dry reforming of representative bio-oil compounds
Arteaga-Pérez, Luis	Mechanistic insights and bifunctional effects in Pd/TiO₂–ZrO₂-catalyzed conversion of pyrolytic limonene to cymene Optimized lignin-derived pyrolytic oils enhance oxidative aging resistance of asphalt binders Structure–Activity Relationships in the Reductive Amination of Furfural over Pd/ZrO₂–TiO₂ Bifunctional Catalysts
Artetxe, Maite	Hydrogen and syngas production from plastic waste pyrolysis and in line sorption enhanced steam reforming Evaluation of operating conditions on the pyrolysis and in-line catalytic cracking of HDPE over a ZSM5 zeolite catalyst Performance of Ni/Al₂O₃, Ni/SiO₂, and Ni/ZrO₂ in the biomass pyrolysis and in-line oxidative steam reforming process for hydrogen production
Aschenbrenner, Eugen	Modeling of residence time for screw conveyors and auger reactors
Ascough, Philippa	Molecular characterisation of the environmentally labile fraction of biochars by hydropyrolysis
Asif, Arooj	Influence of fluid bed operating conditions on waste pyrolysis products
Asingsamanunt, Jarudej	Effect of Pyrolysis Kiln Design on the Structural and Chemical Formation of Macadamia Nut Shell Biochar for Iron-Based Surface Functionalisation
Aslam Khan, Muhammad Nouman	Machine Learning based Optimization of Pyrolysis Oil Yield from Waste Plastics under Sensitivity and Uncertainty Analysis Frameworks
Atashi, Farid	Hydrogen and syngas production from plastic waste pyrolysis and in line sorption enhanced steam reforming Evaluation of operating conditions on the pyrolysis and in-line catalytic cracking of HDPE over a ZSM5 zeolite catalyst Performance of Ni/Al₂O₃, Ni/SiO₂, and Ni/ZrO₂ in the biomass pyrolysis and in-line oxidative steam reforming process for hydrogen production
Aubriet, Frédéric	High-throughput on-line mass spectrometry screening of catalytic fast pyrolysis of cellulose over ZSM-5 zeolites Catalytic hydrotreatment efficiency on HTL biocrudes from two microalgae strains, Chlorella sorokiniana and Chlorella vulgaris, evidenced by FT-ICR MS Extending the Analytical Power of Applied Pyrolysis for Polymers through Online FT-ICR MS Analysis of Heavy Thermo-desorption and Pyrolysis Products
Auersvald, Miloš	Comprehensive Upgrading of Plastic-Derived Pyrolysis Oil to Improve the Quality of Steam Cracking Feedstock Pyrolysis of Multilayer Plastic Packaging to Yield Steam Cracking Feedstock
Awad, Sary	Thermogravimetric Insights into Polyethylene Degradation: Effect of Clay-Based Catalyst Acidity and Textural Properties
Ayoub, Chenicheni	Tailoring Hierarchical Nanocrystalline Zeolite NaY: A Template-Free Hydrothermal Strategy for Advanced Catalytic Pyrolysis Applications
Azevedo, Debora	Eucalyptus biomass valorization: evaluation of the influence of slow pyrolysis bio-oil inclusion in refining processes
Aziz, Iqra	Process Integrated Valorization of Fast Pyrolysis Co-Products: Enhancing the textural and Environmental Quality of Biochar via Post-Pyrolysis Treatment.
Azocar-Ulloa, Laura	Exploring the role of Acid-modified and Metal (Ni, Co, Ni/Co) impregnated Chilean Natural Zeolite during Catalytic Co-Hydropyrolysis of Biomass/Plastics Catalytic co-hydropyrolysis of biomass/plastic over Chilean natural zeolite modified with acid and impregnated with mono- and bimetallic nickel - cobalt
B
Babinszki, Bence	Water leaching of wood barks for biocarbon production: Analysis of extractives Effect of pre- and post-treatments on the pyrolysis condensate of pine bark Volatile composition and thermal behavior of hydrochars produced from carbohydrates and wood biomass Impact of process conditions on hydrochars derived from the hydrothermal carbonization of goat manure
Babinszki, Bence	Study on biocarbon produced from untreated and water leached bark
Babu, Pragadeshwar	Detailed Characterization of Leather Solid Wastes Using Analytical Py-GC/MS and TG-IR to Evaluate Resource Recovery Potential
Badr, Parniya	Experimental and Modelling Studies on Biomass Pyrolysis in Molten Salts
Bai, Hui	Insight into the pyrolysis behavior of tar-rich coal via infrared fast heating
Bakken, Jørn	Study on biocarbon produced from untreated and water leached bark
Bakken, Jørn	Study on CO2 activation on properties of biochar
Balding, Lisa Charlotte	What are we breathing at home? - Household Micro- and Nanoplastics: Composition, Differences, potential Sources & Determinants
Balducci, Andrea	Conversion of hazelnut shell waste into hard carbon materials for the sustainable production of hybrid capacitors
Ballotta, Bernardo	Integrated Computational, Experimental, and Kinetic Modeling Study of the Pyrolysis Mechanisms of Hemicellulose Molecular Constituents
Balsamo, Marco	Role of active phases based on Fe, Zn and MgCl2 for in-situ upgrading of bio-crude during hydrothermal liquefaction of tannery sludge Effect of blends of hydrochar and straw during co-pyrolysis for biochar production
Bao, Rui	THE POWER OF SILYLATION: TOWARD A MOLECULAR DESCRIPTION OF LIQUIDS FROM THERMOCHEMICAL PROCESSES Comprehensive utilization for hydrothermal conversion products of food waste
Barchi, Lucrezia	Air Quality Monitoring in Museum Environment Using Magic Chemisorbers
Barczak, Beata	Activated Carbon-Based Catalyst Supports for Dry Methane Reforming and Coke Formation
Barker, Jim	Hydropyrolysis: towards fluorescence-free Raman analysis of internal diesel injector deposits
Barlucchi, Leonardo	Assessing airborne microplastics concentrations in indoor working environments using Py-GC-MS
Bartoli, Mattia	Spent coffee biochar contained poly(dimethylsiloxane) composites as membranes for gas separation Iron tailored biochar for waterborne bacteriar treatment Hydrogen evolution through ammonia borane hydrolysis over iron tailored pig manure biochar catalyst Tailored biochar based composited for electromagnetic enhanced composite preparation
Basco, Anna	Thermal and Catalytic Pyrolysis of Olive Stone to produce Phenol-rich Bio-oils Thermal and Catalytic co-pyrolysis of Olive Stone and LDPE in a spouted bed reactor for sustainable drop-in Hydrocarbon
Baumer, Ursula	Analytical Investigation of Cyclohexanone Resins for Cultural Heritage by Evolved Gas analysis-MS and Double-shot Py-GC/MS
Bausano, Agnese	Untreated Pyrolysed 3D Bamboo as a Solar Steam Generation Device
Bazri, Shahab	Structural tailoring of pyrolysis-derived carbon from thermo-catalytic methane decomposition
Becker, Jaco	Chemical Recycling of Polypropylene via Heterogeneously Catalyzed Dehydrogenation and Metathesis
Beigbeder, Joana	Biomass-Driven Engineering of Conductive Biochars: Linking Feedstock, Structure, and Electrical Performance at Constant Density
Belandria, Veronica	THERMOCHEMICAL CONVERSION OF DIGESTATE WASTE FOR HYDROGEN-RICH SYNGAS PRODUCTION USING TGA ENERGY RECOVERY FROM SLAUGHTERHOUSE WASTE: GASIFICATION PERFORMANCE AND DIGESTATE VALORIZATION PYROLYSIS CHARACTERISTICS AND THERMO-KINETIC PARAMETERS FOR HYDROCHARS PRODUCED FROM AGRICULTURAL INDUSTRIES
Belkhiri, Samir	Thermal Decomposition and Energetic Behavior of Ammonuim Nitrate modified with Nitrocellulose-Coated AlMg–NGO@nFe₂O₃ Nanothermite
Bellani, Santino	Structural tailoring of pyrolysis-derived carbon from thermo-catalytic methane decomposition
Bellos, Georgios	Multi-phase kinetic modeling of LDPE pyrolysis: From condensed-phase degradation to secondary gas-phase reactions
Ben Bouabsa, Mariem	THERMOCHEMICAL CONVERSION OF DIGESTATE WASTE FOR HYDROGEN-RICH SYNGAS PRODUCTION USING TGA ENERGY RECOVERY FROM SLAUGHTERHOUSE WASTE: GASIFICATION PERFORMANCE AND DIGESTATE VALORIZATION
Benaliouche, Fouad	Design and characterization of a promising chitin-based energetic polysaccharide
Benedetto, Eleonora	Can the pyrolysis kinetics of cellulose, hemicellulose and lignin serve as building blocks to describe the behavior of physical mixtures and real biomass?
Benetková, Barbora	Overcoming matrix and oligomer interferences in pyrolysis GC-MS analysis of microplastics in animal tissue
Beretta, Alessandra	Can the pyrolysis kinetics of cellulose, hemicellulose and lignin serve as building blocks to describe the behavior of physical mixtures and real biomass? Multi-scale investigation of methane pyrolysis for the simultaneous production of COx-free hydrogen and valuable carbonaceous materials for the steelmaking sector
Berkel, Leon Loni	Accounting for Structural Variability of Lignin in CRECK-S-B Kinetic Models for Pyrolysis across Different Extraction Methods
Bertelli, Irene	Artificial and natural UV aging of beeswax: new insights into its chemical composition from Py-GC/MS and SPME-GC/MS
Betancur, Mariluz	Exploring the thermochemical recycling of polystyrene waste using thermo-oxidative degradation
Biale, Greta	Understanding the ageing of polyurethane foams in art and design: a thermoanalytical approach
Biale, Greta	Unravelling the impact of microwave-assisted pre-treatment on tire wear particles by Py-GC-MS
Biale, Greta	Exploring the potential of one-pot microwave-assisted pretreatments coupled with py-gc-ms for the quantification of mps and associated contaminants Thermoanalytical techniques for the knowledge of plastic heritage: from chemistry to conservation
Bijl, Anton	Ex-situ catalytic pyrolysis of paper sludge to bio-BTX on a staged free-fall reactor using three commercial catalysts
Bin, Han	Advances in the investigation of cultural heritage materials through the coupling of pyrolysis with GCxGC-MS Analytical pyrolysis promotes organic residue analysis in China Analytical pyrolysis of bamboo resiudes: a case in point of climate variation in North China Plain during 4th century BC
Binotti, Marco	Validating solar relevant PHC:biomass ratios in fluidized bed fast pyrolysis
Bissonnette, Justine	Addressing Matrix Effects in Micro- and Nanoplastic Quantification Using Pyrolysis-GC-cIMS-HRMS
Blazquez, G.	Pyrolysis as the gateway thermochemical route for plastic-to-hydrogen-rich gas valorization Bifunctional magnetic Co3O4-B/C catalysts for the thermochemical conversion of non-reciclable plastic waste
Bleile, Pia	Impact of Intra-Particle Heat Conduction on Waste Plastic Pyrolysis
Bocchini, Sergio	Spent coffee biochar contained poly(dimethylsiloxane) composites as membranes for gas separation Hydrogen evolution through ammonia borane hydrolysis over iron tailored pig manure biochar catalyst
Boeuf, Dominique	Physico-chemical properties of biochars from four different caribbean biomasses
Bonaduce, Ilaria	Exploring the oxidative polymerization of polyunsaturated methyl esters by EGA-MS: a molecular approach to investigate lipid-based polymer networks in historical paint models Influence of Progressive and Instantaneous Heating on the Pyrolysis Products of Silk
Bonnot-Diconne, Celine	Optimizing Multifunctional Py‑GC/MS Workflows for Historical Gold Varnishes: First Application to a 17th‑Century Gilt Leather Panel
Borges, Adriana	Eucalyptus biomass valorization: evaluation of the influence of slow pyrolysis bio-oil inclusion in refining processes
Borjigin, Siqingaowa	Inline High-Sensitivity Analysis of Brominated Pyrolysates from TBBPA-Containing Polystyrene Using Py-GC/NICI-MS
Borker, Mohnish Madhukar	Catalytic Pyrolysis of E-Waste Plastics Using Red Mud
Bostyn, Stéphane	THERMOCHEMICAL CONVERSION OF DIGESTATE WASTE FOR HYDROGEN-RICH SYNGAS PRODUCTION USING TGA ENERGY RECOVERY FROM SLAUGHTERHOUSE WASTE: GASIFICATION PERFORMANCE AND DIGESTATE VALORIZATION
Bostyn, Stéphane	PYROLYSIS CHARACTERISTICS AND THERMO-KINETIC PARAMETERS FOR HYDROCHARS PRODUCED FROM AGRICULTURAL INDUSTRIES
Botas, Juan Angel	Pressure effect on catalytic pyrolysis of eucalyptus over hierarchical BETA zeolite
Bouizi, Younes	Synthesis, characterization and catalytic activity in dry reforming reaction of Ni/C catalysts prepared from different biomasses
Boulkadid, Moulai Karim	Thermal Decomposition and Energetic Behavior of Ammonuim Nitrate modified with Nitrocellulose-Coated AlMg–NGO@nFe₂O₃ Nanothermite N-Doped Reduced Graphene Oxide Supported Fe₂O₃: A High-Performance Catalyst for AN-Based Propellants
Boumaza, Lokmene	Unraveling the Characteristics and Pyrolysis Mechanism of Energetic Cellulose Carbamate Nitrate Supplemented with Organic Stabilizers
Bourguignon, Elsa	Optimizing Multifunctional Py‑GC/MS Workflows for Historical Gold Varnishes: First Application to a 17th‑Century Gilt Leather Panel
Boushaki, Toufik	THERMOCHEMICAL CONVERSION OF DIGESTATE WASTE FOR HYDROGEN-RICH SYNGAS PRODUCTION USING TGA ENERGY RECOVERY FROM SLAUGHTERHOUSE WASTE: GASIFICATION PERFORMANCE AND DIGESTATE VALORIZATION
Bouton, Dorian	Characterization and quantification of Tire and Road Wear Particles (TRWP) in environmental samples: Integration of Py-GC/MS and Rock-Eval® techniques
Bracciale, Maria Paola	Carbon Formation on Surfaces during Methane Pyrolysis: Effects of Temperature, Methane Flow Rate, and Operation Time
Brachi, Paola	Thermal and Catalytic Pyrolysis of Olive Stone to produce Phenol-rich Bio-oils
Branca, Carmen	Kinetic Modelling of Wood Pyrolysis Using in-situ Natural Components
Brandsma, Sicco	Py‑GC‑MS method development and validation for micro‑ and nanoplastics in human breast milk and bile
Briones, Laura	Pressure effect on catalytic pyrolysis of eucalyptus over hierarchical BETA zeolite
Brito, Paulo	Conceptual Pathways for the Valorisation of Gasification-Derived Biochars Gas Composition Dynamics in Biomass Gasification Processes Effect of CaO Loading on In-Situ CO2 Capture during Pruning Biomass Gasification
Bronson, Benjamin	Characterization of Volatile Carbonyl Compounds in Biorefinery Streams using SPME-GC: Implications for Occupational Health and Safety
Buchanan, Anthony	Expanding the pyrolysis toolkit: Automated comparative analysis of complex materials using Py–GC×GC–TOF MS and advanced chemometrics
Buchta, Petr	Pyrolysis of Carbonaceous Xerogels Synthesized via Polycondensation of m-Substituted Phenols with Furfural: Thermogravimetric and Thermomechanical Investigation
Bukowczan, Artur	Unraveling the Pyrolytic Degradation Mechanisms and Recycling Potential of Non-Isocyanate Polyurethanes
Bulavová, Petra	Comparative Thermal Degradation Analysis of Pomegranate, Walnut, and Pistachio Biomasses: Influence of Drying Method on Thermochemical Stability and Volatile Content Pyrolysis of Carbonaceous Xerogels Synthesized via Polycondensation of m-Substituted Phenols with Furfural: Thermogravimetric and Thermomechanical Investigation
Bulsink, Philip	Characterization of Volatile Carbonyl Compounds in Biorefinery Streams using SPME-GC: Implications for Occupational Health and Safety
Bunt, John	Chemical Recycling of Polypropylene via Heterogeneously Catalyzed Dehydrogenation and Metathesis
Busillo, Emmanuel	Carbon Formation on Surfaces during Methane Pyrolysis: Effects of Temperature, Methane Flow Rate, and Operation Time
Bustos-Martinez, Diana	Comprehensive utilization of corn cob (Zea Mays) for the production of biofuels and platform molecules through a hybrid bio-thermocatalytic conversion route
Béen, Frederic	Py‑GC‑MS method development and validation for micro‑ and nanoplastics in human breast milk and bile Addressing Matrix Effects in Micro- and Nanoplastic Quantification Using Pyrolysis-GC-cIMS-HRMS
Böhmdorfer, Stefan	Overcoming matrix and oligomer interferences in pyrolysis GC-MS analysis of microplastics in animal tissue
C
Caballero Iglesias, Blanca Maria	Zeolite Catalysed Upgrading of CFRP Pyrolysis Vapours for Enhanced Hydrogen Production
Cadona, Louise	Extending the Analytical Power of Applied Pyrolysis for Polymers through Online FT-ICR MS Analysis of Heavy Thermo-desorption and Pyrolysis Products
Calero, M.	Pyrolysis as the gateway thermochemical route for plastic-to-hydrogen-rich gas valorization Bifunctional magnetic Co3O4-B/C catalysts for the thermochemical conversion of non-reciclable plastic waste
Calik Ulu, Fatma	Heteroatom Transfer and Product Composition of Plastic Waste Pyrolysis The role of branching in polyethylene pyrolysis
Callén, María Soledad	Pyrolysis of end-of-life paddle balls: assessing the kinetics and the recovery of value-added products Exploring the thermochemical recycling of polystyrene waste using thermo-oxidative degradation Validating solar relevant PHC:biomass ratios in fluidized bed fast pyrolysis On the purification of tire pyrolysis oil using a lab-scale TRL-4 packed distillation column for limonene and BTEX recovery
Campanale, Claudia	Assessing airborne microplastics concentrations in indoor working environments using Py-GC-MS
Campi, Cecilia	Influence of Progressive and Instantaneous Heating on the Pyrolysis Products of Silk
Canabarro, Nicholas Islongo	Study on CO2 activation on properties of biochar
Caner, Meryiem	Residual Energy Recovery from Digestate via Py-AD approach: Water-soluble fraction of Bio-oil as Feedstock and its Molecular Characterization by Silylation-GC-MS
Cao, Jing-Pei	Efficient catalytic pyrolysis of biomass to light aromatic hydrocarbons over Zn/ZSM-5 Catalytic reforming of lignite pyrolysis volatiles over metal oxide and zeolite tandem catalysts for light aromatics production A comprehensively experimental and kinetic modeling investigation of C6 ketone isomers pyrolysis and oxidation: Insight into effects of isomerism Pyrolysis of C5 Cyclic Hydrocarbons and Derived High-Energy-Density Fuels: Kinetic Modeling and Aromatics Formation Mechanisms
Capasso, Antonio	Thermal and Catalytic Pyrolysis of Olive Stone to produce Phenol-rich Bio-oils Thermal and Catalytic co-pyrolysis of Olive Stone and LDPE in a spouted bed reactor for sustainable drop-in Hydrocarbon
Caravaggio, Gianni	Comprehensive Characterization of Pyrolytic Aqueous Phases for Valorization via Aqueous Phase Reforming
Carnaroglio, Diego	Exploring the potential of one-pot microwave-assisted pretreatments coupled with py-gc-ms for the quantification of mps and associated contaminants
Caroti, Giulia	Exploring the oxidative polymerization of polyunsaturated methyl esters by EGA-MS: a molecular approach to investigate lipid-based polymer networks in historical paint models
Carrier, Marion	Kinetic analysis of biochar formation by Py-GC/MS during fast pyrolysis of lignocellulosic biomass
Carrillo-Pedraza, Eileen Susana	Comprehensive utilization of corn cob (Zea Mays) for the production of biofuels and platform molecules through a hybrid bio-thermocatalytic conversion route
Carré, Vincent	Catalytic hydrotreatment efficiency on HTL biocrudes from two microalgae strains, Chlorella sorokiniana and Chlorella vulgaris, evidenced by FT-ICR MS
Carré, Vincent	High-throughput on-line mass spectrometry screening of catalytic fast pyrolysis of cellulose over ZSM-5 zeolites
Casini, David	Upgrading fast‑pyrolysis chars through thermal stabilization: analytical insights and implications for their use
Castagna, Alessandra	Co-Pyrolysis of Greenhouse Tomato Plant Waste Contaminated with Plastics: Influence of Process Parameters and Biochar Potential for Thermal Plasma Treatment Hydrothermal Carbonization of Sewage Sludge for Thermal Plasma Treatment: Influence of Process Parameters on Energy and Mineral Recovery in Hydrochars
Castoldi, Lidia	Multi-scale investigation of methane pyrolysis for the simultaneous production of COx-free hydrogen and valuable carbonaceous materials for the steelmaking sector
Castro, Maria del Mar	Characterization of modified lignin for applications in sustainable biobased formulations
Castro, Vanessa Oliveira	Pressure carbonisation of iron doped cellulose Pickering Emulsions towards catalytical applications
Cerciello, Francesca	Exploiting Fast Pyrolysis Conditions for one-step synthesis of Carbon Dots from Biomass
Cerciello, Francesca	Pyrolysis-Driven Combustion of Polylactic Acid in Hybrid Aerospace Propulsion Pyrolysis-Driven Iron Redox Systems: A Multifunctional Approach to Hydrogen, Biofuels, and Carbon Capture
Chamnanmor, Ratchanan	Effects of Pyrolysis Temperature on Biochar Yield, CO2 Adsorption Capacity and Kinetic from Coconut Husk Biomass
Chandran, Ajay Mugundan	Ex-situ catalytic co-pyrolysis of Bamboo and Polystyrene with Nickel, Molybdenum and cobalt impregnated Red Mud for bio-oil synthesis
Channa, Najeebullah	Iron tailored biochar for waterborne bacteriar treatment
Charushree, Sivakumar	Optimization of Pre-treatment Protocols for Micro- and Nanoplastics Detection in Human Keratinous and Blood Tissue Samples Using Analytical Py-GC/MS
Chaudhuri, Arnab	Trade-offs between pyrolysis oil quality and valuable chemicals: the case of the co-pyrolysis of HDPE and PET
Checa, Ruben	Catalytic hydrotreatment efficiency on HTL biocrudes from two microalgae strains, Chlorella sorokiniana and Chlorella vulgaris, evidenced by FT-ICR MS
Chen, Dongyu	Enhanced hydrocarbons generation of cyclic catalytic pyrolysis of acid-washed sweet sorghum stalk through Mo/HZSM-5
Chen, Hanping	Insight into the pyrolytic characteristic and heavy metal immobilization during the co-pyrolysis of phytoremediation biomass with duckweed
Chen, Meiqian	Bromination mechanism of typical metallic radionuclides on defective graphite surface by HBr：Insight from first principles Evaluation on the migration and occurrence mechanism of impurities in decommissioned nuclear graphite by multi-halogen synergistic roasting
Chen, Wei	Simultaneous pyrolysis-activation-doping of biomass for porous N-doped biochar
Chen, Xiao	Catalytic Selective Hydrogenolysis of Coal-based Aromatic Ethers Chemical upcycling of waste plastics over metal–acid bifunctional catalysts
Chen, Yanping	Ex-situ catalytic pyrolysis of paper sludge to bio-BTX on a staged free-fall reactor using three commercial catalysts
Cheng, Wei	Insight into the pyrolytic characteristic and heavy metal immobilization during the co-pyrolysis of phytoremediation biomass with duckweed
Chiaramonti, David	Operation and results of a pilot-plant carbon-moving-bed methane cracking reactor for the production of sustainable hydrogen and solid carbon Oxidative Slow Pyrolysis in an Auger Reactor: Autothermal Operation and Process Intensification
Chiemchaisri, Chart	Effect of Pyrolysis Kiln Design on the Structural and Chemical Formation of Macadamia Nut Shell Biochar for Iron-Based Surface Functionalisation
Chinnambedu-Murugesan, Raghavan	Rapid biochar quality screening using Hyperspectral Imaging (HI) and Machine Learning (ML)
Choi, Hojin	Characterization of Microplastics in Ambient Air and Their Relationship with PM2.5 Organic Components Using Pyrolysis–GC/MS
Choi, Hojin	Field Applicability Evaluation of Size-Segregated Microplastics in Air in Representative Metropolitan Areas Using Analytical Pyrolysis–GC/MS
Choi, Yong Jun	Catalytic co-conversion of biodegradalbe polymer and plastics over hierarchical zeolite catalyst
Chung, Uimyung	Acid Washing and Carbonization of Biomass Bottom Ash for Recycling into Bio-coke
Ciani, Matilde	Integrating Hydrothermal Treatment and Microalgal Cultivation for Brewery Spent Grains Valorization
Ciccarello Cicchino, Elisa	Effect of acid and basic pretreatment on the performance of hydrothermal liquefaction of sewage sludge and olive oil pomace as real waste biofeedstocks
Ciccone, Biagio	Thermal and Catalytic Pyrolysis of Olive Stone to produce Phenol-rich Bio-oils Thermal and Catalytic co-pyrolysis of Olive Stone and LDPE in a spouted bed reactor for sustainable drop-in Hydrocarbon
Cieslak, Daniel	Fluidised-bed pyrolysis of contaminated biomass – process parameters and product analysis
Colin, Julien	Biomass pyrolysis in a fixed-bed reactor: effect of pressure and sweep gas velocity
Colina, Jose Rodolfo	Optimized lignin-derived pyrolytic oils enhance oxidative aging resistance of asphalt binders
Cologon, Perrine	Characterization and quantification of Tire and Road Wear Particles (TRWP) in environmental samples: Integration of Py-GC/MS and Rock-Eval® techniques
Colombi, Marco	Validating solar relevant PHC:biomass ratios in fluidized bed fast pyrolysis
Comendador, Pablo	Hydrogen and syngas production from plastic waste pyrolysis and in line sorption enhanced steam reforming
Comoretto, Davide	Untreated Pyrolysed 3D Bamboo as a Solar Steam Generation Device
Concha, Jose Luis	Optimized lignin-derived pyrolytic oils enhance oxidative aging resistance of asphalt binders
Coppola, Antonio	Pyrolysis-Driven Iron Redox Systems: A Multifunctional Approach to Hydrogen, Biofuels, and Carbon Capture
Coralli, Irene	Quantification of nano/microplastic in urban atmospheric deposition using pyrolysis-GC-MS Biodegradable Bioplastics in Soil: Multi-Analytical Evidence of Fragmentation and Soil Organic Matter Changes
Corami, Fabiana	Multi-analytical and multi-matrix approach for microplastics characterization: the synergy of Py-GC/MS and μ-FTIR
Correa de Araujo, Ana	Representation of lignin derived oligomers in pyrolysis bio-oil: Advances towards improved prediction of vapor liquid equilibria for controlling bio-oil quality
Coskuntuna, Arzu	Characterization and Antifungal Activity of Wood Vinegar Produced from Slow Pyrolysis of Canola Stalk
Costa, Gabriel	Validating solar relevant PHC:biomass ratios in fluidized bed fast pyrolysis
Cotton, Laura J.	Splitless analytical pyrolysis of museum foraminifera tests: historical insights on oceanic plastic pollution
Csutorás, Beatrix	Utilization of plastic waste-derived heavy hydrocarbons as steam cracking feedstock Value added products obtained from pilot scale waste pyrolysis and gasification for circular economy
Cueto, Jennifer	Pressure effect on catalytic pyrolysis of eucalyptus over hierarchical BETA zeolite
Cueto, Jennifer	LOW PRESSURE CATALYTIC HYDROPYROLYSIS OF CHLORELLA VULGARIS
Cui, Shuang	Unveiling interactions of enzymatic hydrolysis lignin and waste tires during co-pyrolysis
Czégény, Zsuzsanna	Water leaching of wood barks for biocarbon production: Analysis of extractives Effect of pre- and post-treatments on the pyrolysis condensate of pine bark Volatile composition and thermal behavior of hydrochars produced from carbohydrates and wood biomass Impact of process conditions on hydrochars derived from the hydrothermal carbonization of goat manure
Czégény, Zsuzsanna	Study on biocarbon produced from untreated and water leached bark
D
D'Acierno, Francesco	Pressure carbonisation of iron doped cellulose Pickering Emulsions towards catalytical applications
D'Arrigo, Paola	Can the pyrolysis kinetics of cellulose, hemicellulose and lignin serve as building blocks to describe the behavior of physical mixtures and real biomass?
da Costa Magalhaes, Bruno	Multi-phase kinetic modeling of LDPE pyrolysis: From condensed-phase degradation to secondary gas-phase reactions
da Costa Magalhães, Bruno	Catalytic hydrotreatment efficiency on HTL biocrudes from two microalgae strains, Chlorella sorokiniana and Chlorella vulgaris, evidenced by FT-ICR MS
da Silva Fonseca, José Daniel	Corn stalk pyrolysis: process characterization and properties of products
Daghio, Matteo	Integrating Hydrothermal Treatment and Microalgal Cultivation for Brewery Spent Grains Valorization
Dahmen, Nicolaus	Representation of lignin derived oligomers in pyrolysis bio-oil: Advances towards improved prediction of vapor liquid equilibria for controlling bio-oil quality Upgrading of Slow Pyrolysis Oil via Mild and Deep Hydrodeoxygenation for Green Marine Fuels Process Integrated Valorization of Fast Pyrolysis Co-Products: Enhancing the textural and Environmental Quality of Biochar via Post-Pyrolysis Treatment. Modeling of residence time for screw conveyors and auger reactors
Dai, Leilei	One-pot synthesis of hierarchical ZSM-5 for lifetime improvement in catalytic conversion of plastic waste Chemical Recycling of Waste Plastics Through Microwave-assisted Thermochemical Conversion
Dall'Osto, Gianluca	Multi-scale investigation of methane pyrolysis for the simultaneous production of COx-free hydrogen and valuable carbonaceous materials for the steelmaking sector
Damizia, Martina	Chemical Recycling of Mixed Plastic Waste via a Two-Step Process Combining Hydrothermal Liquefaction Pretreatment and Pyrolysis for Fuel Oil Production
Darjazi, Hamideh	Untreated Bamboo-derived carbons as sustainable anode material for sodium-ion batteries
Das, Subhasis	Sustainable valorization of plastic waste via zeolite-catalyzed pyrolysis and in-line CO2 reforming over Ni-Co-based catalysts
David, Laurent	Biomass-Driven Engineering of Conductive Biochars: Linking Feedstock, Structure, and Electrical Performance at Constant Density
David-Quillot, Frank	Extending the Analytical Power of Applied Pyrolysis for Polymers through Online FT-ICR MS Analysis of Heavy Thermo-desorption and Pyrolysis Products
Davies, Adrienne	Hydropyrolysis: towards fluorescence-free Raman analysis of internal diesel injector deposits
de Angelis, Tommaso	Pyrolysis-Driven Combustion of Polylactic Acid in Hybrid Aerospace Propulsion
de Caprariis, Benedetta	Chemical Recycling of Mixed Plastic Waste via a Two-Step Process Combining Hydrothermal Liquefaction Pretreatment and Pyrolysis for Fuel Oil Production Carbon Formation on Surfaces during Methane Pyrolysis: Effects of Temperature, Methane Flow Rate, and Operation Time
De Falco, Francesca	Preliminary application of pyrolysis and TD-GC-MS/MS to study additive leaching from plastics induced by sediment abrasion and fragmentation
De Filippis, Paolo	Carbon Formation on Surfaces during Methane Pyrolysis: Effects of Temperature, Methane Flow Rate, and Operation Time
de Joannon, Mara	Experimental investigation of non-catalytic dry reforming of representative bio-oil compounds
De la Rosa, José M.	Decoding subsurface biomarkers in a Mars-analogue lava tube through analytical pyrolysis and isotope fingerprints
De Langhe, Simon	Carbon-Catalyzed Methane Pyrolysis in Fluidized-Bed Reactors: Analytical Investigation of Polyaromatic Hydrocarbon Formation and Two-Phase Reactor Modeling
De Lorenzo, Roberta	Air Quality Monitoring in Museum Environment Using Magic Chemisorbers
De Mol, Emile	Thermochemistry as synthesis tool for new chemical building blocks from isosorbides and isomannides
De Rossi, Marcello	Assessing airborne microplastics concentrations in indoor working environments using Py-GC-MS
Debiagi, Paulo	Accounting for Structural Variability of Lignin in CRECK-S-B Kinetic Models for Pyrolysis across Different Extraction Methods
Degano, Ilaria	Influence of Progressive and Instantaneous Heating on the Pyrolysis Products of Silk Thermoanalytical techniques for the knowledge of plastic heritage: from chemistry to conservation Understanding the ageing of polyurethane foams in art and design: a thermoanalytical approach
Deng, Deping	Analytical pyrolysis of bamboo resiudes: a case in point of climate variation in North China Plain during 4th century BC
Deng, Kai	Heating rate of the rotary-kiln reactor on the pyrolysis of waste plastics
Deng, Meiling	Interaction mechanism of organic components during decommissioned pv laminates oxidative pyrolysis for sustainable recycling
Deng, Qian	Interaction mechanism of organic components during decommissioned pv laminates oxidative pyrolysis for sustainable recycling
Deng, Shuanghui	Deep insights into fluorine transformation mechanisms during pyrolysis of retired photovoltaic backsheets: Experimental validation and ReaxFF molecular dynamics simulations
Denghezli, Souha	Catalytic pyrolysis of polyethylene: Effects of shaping zeolite particles and of reactor configuration (in-situ and ex-situ)
Denton, Mackenzie	Heteroatom Transfer and Product Composition of Plastic Waste Pyrolysis The role of branching in polyethylene pyrolysis
Depla, Diederik	Structure–Performance Relationships in Ni/C Catalysts for Power-to-Gas Applications
Dernbecher, Andrea	Modeling approach for the electromagnetic field and heating of biomass in a microwave reactor using OpenFOAM Influence of Wood Anisotropy on Pyrolysis Behavior: Experimental and Numerical Study
Desmyter, Arne	Thermochemistry as synthesis tool for new chemical building blocks from isosorbides and isomannides
Deuss, Peter	Green hydrothermal synthesis of catechol from 2-acetylfuran
Dhainaut, Jeremy	Catalytic pyrolysis of polyethylene: Effects of shaping zeolite particles and of reactor configuration (in-situ and ex-situ)
Di Giorno, Laura Sofia	Cosmetic Residues in Greek Lekythoi from the Necropolis of Spina Investigated by Analytical Pyrolysis
Di Lauro, Francesca	Role of active phases based on Fe, Zn and MgCl2 for in-situ upgrading of bio-crude during hydrothermal liquefaction of tannery sludge
Di Lauro, Francesca	Effect of blends of hydrochar and straw during co-pyrolysis for biochar production
Di Salvo, Rebecca	Spent coffee biochar contained poly(dimethylsiloxane) composites as membranes for gas separation
Diaz, Ainhoa	LOW PRESSURE CATALYTIC HYDROPYROLYSIS OF CHLORELLA VULGARIS
Dieguez Alonso, Alba	Progressive development of the understanding of transport–reaction interactions in pyrolysis over the years and current challenges associated with plastic waste conversion Evolved Gas Analysis (EGA-MS) for polyethylene quantification in compostable bioplastics shopping bags Unravelling the chemical complexity of artificially aged tire wear particles by Py-GCxGC-ToFMS Splitless analytical pyrolysis of museum foraminifera tests: historical insights on oceanic plastic pollution Exploring the potential of one-pot microwave-assisted pretreatments coupled with py-gc-ms for the quantification of mps and associated contaminants Thermochemistry for selective production of platform chemicals Why lignocellulosic components make thermochemical conversion of biomass so interesting?
Dieguez-Alonso, Alba	Modeling approach for the electromagnetic field and heating of biomass in a microwave reactor using OpenFOAM Influence of Wood Anisotropy on Pyrolysis Behavior: Experimental and Numerical Study
Dietemann, Patrick	Analytical Investigation of Cyclohexanone Resins for Cultural Heritage by Evolved Gas analysis-MS and Double-shot Py-GC/MS
Dijk, Jelmer	Optimization of catalytic hydrocarbon aromatization to BTX in a lab-scale fluidized bed reactor
Ding, Lu	Study on the Modification of Coal Gasification Fine Slag for Corn-stalk Pyrolysis Catalysts
Di̇nç, Görkem	Integrating Hydrothermal Carbonization and Pyrolysis for the Revalorization of Sewage Sludge Digestate: A Hybrid Thermochemical-Biological Perspective
Dobele, Galina	Optimizing Activated Carbon Properties: The Role of Precursor Source, Carbonization and Activation Parameters Study of liquid and solid product formation after hydrothermal processing of carbohydrate and aromatic biomass derivatives Comparative Study on the Hydrothermal Carbonization of Glucose and Levoglucosan: Understanding Carbon Sphere Formation Pathways Py-GC/MS investigation of the formation of various anhydrosugars from carbohydrates for efficient green chemical synthesis
Domine, Marcelo	Structure–Activity Relationships in the Reductive Amination of Furfural over Pd/ZrO₂–TiO₂ Bifunctional Catalysts
Domingues, Ramon	Microwave-assisted treatment to convert commercial polyethylene microbeads into a liquid suspension used as reference material for Py-GC-MS
Donati, Paolo	Structural tailoring of pyrolysis-derived carbon from thermo-catalytic methane decomposition
Dong, Ming	Selective Condensation Behavior of Biomass Pyrolysis Vapors at Wide Condensation Temperatures: Component Evolution, Prediction, and Validation
Dontree, Pojcharapol	Effect of Pyrolysis Kiln Design on the Structural and Chemical Formation of Macadamia Nut Shell Biochar for Iron-Based Surface Functionalisation
Dooley, Stephen	Integrated Computational, Experimental, and Kinetic Modeling Study of the Pyrolysis Mechanisms of Hemicellulose Molecular Constituents
Dourari, Mohammed	Thermal Decomposition and Kinetics of a Nitrochitosan-Based Energetic Composite
Drané, Méghane	Physico-chemical properties of biochars from four different caribbean biomasses
Du, Jiaxi	Thermal-Analysis-Based Characterization of the Heating-Combustion Boundary in Biomass Systems
Du, Jiaxing	Characteristics and mechanism for ex-situ catalytic pyrolysis of oil-based drill cuttings (OBDC) using OBDC pyrolysis slag
Du, Lijun	High-temperature pyrolysis of pine sawdust using metallurgical slag as oxygen carrier and gasification of solid residues Hydrogen transfer and reaction mechanism during gradient temperature pyrolysis of coal under steam atmosphere
Duan, Xinke	Zn-Fe Co-modified HZSM-5/MCM-41 Catalytic Co-pyrolysis of Miscanthus and Polystyrene to Produce Aromatic-Rich Oil
Duce, Celia	Exploring the oxidative polymerization of polyunsaturated methyl esters by EGA-MS: a molecular approach to investigate lipid-based polymer networks in historical paint models
Dufour, Anthony	Catalytic pyrolysis of polyethylene: Effects of shaping zeolite particles and of reactor configuration (in-situ and ex-situ) Effect of steam and solid residence time on wood pyrolysis-gasification products Biomass pyrolysis in a fixed-bed reactor: effect of pressure and sweep gas velocity Catalytic fast pyrolysis of biomass over hierarchical zeolites: comparison of mordenite, beta and ZSM-5 Improving the determination of atomic mass balances of biochars produced from biomass pyrolysis Synthesis, characterization and catalytic activity in dry reforming reaction of Ni/C catalysts prepared from different biomasses
Dufour, Anthony	High-throughput on-line mass spectrometry screening of catalytic fast pyrolysis of cellulose over ZSM-5 zeolites
Dumont, Géraldine	Unravelling the chemical complexity of artificially aged tire wear particles by Py-GCxGC-ToFMS Unravelling the impact of microwave-assisted pre-treatment on tire wear particles by Py-GC-MS
Dunkle, Melissa	Multi-phase kinetic modeling of LDPE pyrolysis: From condensed-phase degradation to secondary gas-phase reactions
Duquesne, Sophie	Catalytic pyrolysis of polyethylene: Effects of shaping zeolite particles and of reactor configuration (in-situ and ex-situ)
Durkin, Amanda	What are we breathing at home? - Household Micro- and Nanoplastics: Composition, Differences, potential Sources & Determinants
E
Ech'Chalh, Youssef	Co-pyrolysis of Polypropylene and asphalt waste: insights into synergistic effects and oil yield optimization Improving liquid and BTEX production via co-pyrolysis of polystyrene and road asphalt waste
Ekici, Ecrin	Upgrading of Slow Pyrolysis Oil via Mild and Deep Hydrodeoxygenation for Green Marine Fuels
El Hage, Roland	Biomass-Driven Engineering of Conductive Biochars: Linking Feedstock, Structure, and Electrical Performance at Constant Density
El-Aradi, Adam	Biochar from intermediate pyrolysis for enhanced cementitious grouts Rapid biochar quality screening using Hyperspectral Imaging (HI) and Machine Learning (ML) Aqueous-Phase and Acid-Modified Biochar for Sustainable and Resilient Soils
Elia, Giuseppe Antonio	Untreated Bamboo-derived carbons as sustainable anode material for sodium-ion batteries
Eljamalra, Ramadan	Wood Cell Wall Ultrastructure Investigated via Hydrolyzable Sugars in Char and TG-MS Analysis
Er, Kübra İrem	Impact of process conditions on hydrochars derived from the hydrothermal carbonization of goat manure
Ercan, Betül	Volatile composition and thermal behavior of hydrochars produced from carbohydrates and wood biomass
Ercan, Betül	Impact of process conditions on hydrochars derived from the hydrothermal carbonization of goat manure
Eschenbacher, Andreas	Reliability of milligram-scale high-throughput screening for evaluating polyolefin chemical recycling in the melt with heterogeneous catalysis
Escola, Jose Maria	Pressure effect on catalytic pyrolysis of eucalyptus over hierarchical BETA zeolite
Eyley, Samuel	Pressure carbonisation of iron doped cellulose Pickering Emulsions towards catalytical applications
F
Fabbri, Daniele	THE POWER OF SILYLATION: TOWARD A MOLECULAR DESCRIPTION OF LIQUIDS FROM THERMOCHEMICAL PROCESSES Fermentability of water-soluble products from HTC-Py-AD processes: comparison of fast and intermediate pyrolysis Cosmetic Residues in Greek Lekythoi from the Necropolis of Spina Investigated by Analytical Pyrolysis Quantification of nano/microplastic in urban atmospheric deposition using pyrolysis-GC-MS Biodegradable Bioplastics in Soil: Multi-Analytical Evidence of Fragmentation and Soil Organic Matter Changes Residual Energy Recovery from Digestate via Py-AD approach: Water-soluble fraction of Bio-oil as Feedstock and its Molecular Characterization by Silylation-GC-MS
Fabozzi, Antonio	Pyrolysis-Driven Iron Redox Systems: A Multifunctional Approach to Hydrogen, Biofuels, and Carbon Capture
Fabozzi, Giovanni	Experimental investigation of non-catalytic dry reforming of representative bio-oil compounds Effects of phase separation and storage temperature in slow pyrolysis bio-oils: insights from a 145-days monitoring study
Facchin, Andrea	THE POWER OF SILYLATION: TOWARD A MOLECULAR DESCRIPTION OF LIQUIDS FROM THERMOCHEMICAL PROCESSES Fermentability of water-soluble products from HTC-Py-AD processes: comparison of fast and intermediate pyrolysis Biodegradable Bioplastics in Soil: Multi-Analytical Evidence of Fragmentation and Soil Organic Matter Changes Residual Energy Recovery from Digestate via Py-AD approach: Water-soluble fraction of Bio-oil as Feedstock and its Molecular Characterization by Silylation-GC-MS
Fang, Zhen	Simultaneous pyrolysis-activation-doping of biomass for porous N-doped biochar
Faravelli, Tiziano	Can the pyrolysis kinetics of cellulose, hemicellulose and lignin serve as building blocks to describe the behavior of physical mixtures and real biomass? Multi-phase kinetic modeling of LDPE pyrolysis: From condensed-phase degradation to secondary gas-phase reactions Experimental and Modelling Investigation of Primary and Secondary Reactions in LDPE Pyrolysis
Faravelli, Tiziano	From Gas-Phase Chemistry to Carbon Formation and Deposition: Validation of a Kinetic Framework for Light Hydrocarbons Pyrolysis
Faravelli, Tiziano	Accounting for Structural Variability of Lignin in CRECK-S-B Kinetic Models for Pyrolysis across Different Extraction Methods
Farhat, Marilyne	Improving the determination of atomic mass balances of biochars produced from biomass pyrolysis
Feng, Shaoxuan	Production of hydrogen-rich syngas from catalytic reforming of biomass gasification tar coupled with in-situ CO2 capture
Fernandez, Alex	Optimized lignin-derived pyrolytic oils enhance oxidative aging resistance of asphalt binders Structure–Activity Relationships in the Reductive Amination of Furfural over Pd/ZrO₂–TiO₂ Bifunctional Catalysts
Ferraro, Giuseppe	Spent coffee biochar contained poly(dimethylsiloxane) composites as membranes for gas separation
Ferrer, Frédéric	Physico-chemical properties of biochars from four different caribbean biomasses
Ferretti, Adele	Thermoanalytical techniques for the knowledge of plastic heritage: from chemistry to conservation
Ferretti, Adele	Understanding the ageing of polyurethane foams in art and design: a thermoanalytical approach
Filomena, Marta	Evolved Gas Analysis (EGA-MS) for polyethylene quantification in compostable bioplastics shopping bags
Fivga, Antzela	Enhancing Syngas Production from Plastic Waste via Catalytic Steam Gasification
Fliri, Lukas	Cellulose carbonization pathways studied using reactive force field methods
Focant, Jean-François	Unravelling the chemical complexity of artificially aged tire wear particles by Py-GCxGC-ToFMS
Focant, Jean-François	Unravelling the impact of microwave-assisted pre-treatment on tire wear particles by Py-GC-MS
Formenton, Gianni	Air Quality Monitoring in Museum Environment Using Magic Chemisorbers
Fraaije, Volker	Understanding Nitrogen-Induced Catalyst Deactivation in Plastic Waste Pyrolysis from Lab to Pilot Scale
Fragkiskatos, Spyridon	Carbon-Catalyzed Methane Pyrolysis in Fluidized-Bed Reactors: Analytical Investigation of Polyaromatic Hydrocarbon Formation and Two-Phase Reactor Modeling
Franchi, Paola	Evolution of Magnetic and Paramagnetic Behavior in Pyrolyzed Bamboo: Influence of Thermal Treatment and Iron Incorporation
Frassoldati, Alessio	Can the pyrolysis kinetics of cellulose, hemicellulose and lignin serve as building blocks to describe the behavior of physical mixtures and real biomass? Experimental and Modelling Investigation of Primary and Secondary Reactions in LDPE Pyrolysis
Frassoldati, Alessio	From Gas-Phase Chemistry to Carbon Formation and Deposition: Validation of a Kinetic Framework for Light Hydrocarbons Pyrolysis
Frassoldati, Alessio	Multi-phase kinetic modeling of LDPE pyrolysis: From condensed-phase degradation to secondary gas-phase reactions
Fridrichova, Dagmar	Sustainable valorization of plastic waste via zeolite-catalyzed pyrolysis and in-line CO2 reforming over Ni-Co-based catalysts
Frišták, Vladimír	From Pyrolysis to Application: Long-Term Evaluation of Sewage Sludge Biochar (Greenchar) in Green Roof Substrates
Fu, Haihan	Pressure-Dependent Pyrolysis of Cyclopropanated Fuel exo-TCN: Experiments and Kinetic Modeling
Fu, Lili	A Strategy for Tuning Pyrolysis and Release Profiles of Reconstituted Tobacco Thermal-Analysis-Based Characterization of the Heating-Combustion Boundary in Biomass Systems The Influence of Physical Parameters and Puffing Conditions on the Thermal Characteristics of Cigar Combustion Cones
Fulignati, Sara	Conversion of hazelnut shell waste into hard carbon materials for the sustainable production of hybrid capacitors Pyrolysis of marine biomasses with different heating technologies: The case of study of Posidonia Oceanica fibrous spheres
Funke, Axel	Representation of lignin derived oligomers in pyrolysis bio-oil: Advances towards improved prediction of vapor liquid equilibria for controlling bio-oil quality Analytical NMR Framework with Synthetic Lignin Oligomers for Surrogate Modelling of Fast Pyrolysis Bio-Oils and Pyrolignin Fractions Process Integrated Valorization of Fast Pyrolysis Co-Products: Enhancing the textural and Environmental Quality of Biochar via Post-Pyrolysis Treatment. Modeling of residence time for screw conveyors and auger reactors
G
Gadiou, Roger	Physico-chemical properties of biochars from four different caribbean biomasses Improving the determination of atomic mass balances of biochars produced from biomass pyrolysis Synthesis, characterization and catalytic activity in dry reforming reaction of Ni/C catalysts prepared from different biomasses
Gagnon-Caya, Guillaume	Characterization of Volatile Carbonyl Compounds in Biorefinery Streams using SPME-GC: Implications for Occupational Health and Safety
Gahfif, Feriel	Thermal Decomposition and Energetic Behavior of Ammonuim Nitrate modified with Nitrocellulose-Coated AlMg–NGO@nFe₂O₃ Nanothermite
Galia, Alessandro	Effect of acid and basic pretreatment on the performance of hydrothermal liquefaction of sewage sludge and olive oil pomace as real waste biofeedstocks
Gallorini, Riccardo	Pyrolysis of marine biomasses with different heating technologies: The case of study of Posidonia Oceanica fibrous spheres
Gambaro, Andrea	Multi-analytical and multi-matrix approach for microplastics characterization: the synergy of Py-GC/MS and μ-FTIR
Gansterer-Heider, David	Long-Duration Low-Temperature Pyrolysis of Wood: From Polymer Degradation to Char Formation
Gao, Ningbo	Production of hydrogen-rich syngas from catalytic reforming of biomass gasification tar coupled with in-situ CO2 capture Pretreatment-catalytic hydrothermal liquefaction of Spirulina: toward high-yield, low-nitrogen biocrude and its prospects as an aviation-fuel precursor Metagenomic Analysis of Key Methanogenic Pathways in Solid-State Co-anaerobic Fermentation of Weathered Coal and Cattle Manure
Gao, Xi	Multiscale and AI-Enabled Investigation of Biomass/Plastic Fast Pyrolysis in Fluidized Bed Reactors
Garbev, Krassimir	Impact of Minerals on the Pyrolysis Behavior and Product Distribution of Polystyrene Impact of stabilizers on the pyrolysis mechanism in chemical recycling of polyvinyl chloride waste
Garcia, Jason	PY-GC-MS as a method for evaluating degradation of paper during material suitability testing
Garcia Almanza, Yadiris	Tuning Pyrolysis Temperature to Engineer Bamboo Biochar for Laccase Immobilisation and Water Treatment
Garcia-Garcia, G.	Pyrolysis as the gateway thermochemical route for plastic-to-hydrogen-rich gas valorization
Garcia-Perez, Manuel	Biomass pyrolysis in a fixed-bed reactor: effect of pressure and sweep gas velocity
García, Tomás	Pyrolysis of end-of-life paddle balls: assessing the kinetics and the recovery of value-added products Exploring the thermochemical recycling of polystyrene waste using thermo-oxidative degradation Validating solar relevant PHC:biomass ratios in fluidized bed fast pyrolysis On the purification of tire pyrolysis oil using a lab-scale TRL-4 packed distillation column for limonene and BTEX recovery
Gargiulo, Giovanna	Pyrolysis-Driven Combustion of Polylactic Acid in Hybrid Aerospace Propulsion
Garrido Frenich, Antonia	Assessment of Conventional and Biodegradable Microplastics in Agricultural Soils applying Py-GC/MS Development and Validation of a Py-GC/MS Method for the Simultaneous Determination of Microplastics and Biomicroplastics in Seawater
Ge, Wentao	Selective Condensation Behavior of Biomass Pyrolysis Vapors at Wide Condensation Temperatures: Component Evolution, Prediction, and Validation
Geantet, Christophe	Catalytic hydrotreatment efficiency on HTL biocrudes from two microalgae strains, Chlorella sorokiniana and Chlorella vulgaris, evidenced by FT-ICR MS
Gehring, Ulrike	What are we breathing at home? - Household Micro- and Nanoplastics: Composition, Differences, potential Sources & Determinants
Gerbaldi, Claudio	Untreated Bamboo-derived carbons as sustainable anode material for sodium-ion batteries
Ghomri, Eya	Synthesis, characterization and catalytic activity in dry reforming reaction of Ni/C catalysts prepared from different biomasses
Ghysels, Stef	Mechanistic insights and bifunctional effects in Pd/TiO₂–ZrO₂-catalyzed conversion of pyrolytic limonene to cymene Valorization of brewer’s spent grains through cascaded protein recovery and fast pyrolysis of its residues Conversion of cellulose into azaheterocycles through pyrolysis under a reactive NH3 atmosphere Co-Pyrolysis of Greenhouse Tomato Plant Waste Contaminated with Plastics: Influence of Process Parameters and Biochar Potential for Thermal Plasma Treatment Green hydrothermal synthesis of catechol from 2-acetylfuran Structure–Performance Relationships in Ni/C Catalysts for Power-to-Gas Applications Hydrothermal Carbonization of Sewage Sludge for Thermal Plasma Treatment: Influence of Process Parameters on Energy and Mineral Recovery in Hydrochars Thermochemistry as synthesis tool for new chemical building blocks from isosorbides and isomannides
Giannelli, Roberto	Hydrothermal Liquefaction of the invasive macroalga Chaetomorpha linum: Parametric optimization and product characterization
Giardini, Lorenzo	From Gas-Phase Chemistry to Carbon Formation and Deposition: Validation of a Kinetic Framework for Light Hydrocarbons Pyrolysis
Ginoble Pandoli, Omar	Tuning Pyrolysis Temperature to Engineer Bamboo Biochar for Laccase Immobilisation and Water Treatment Untreated Pyrolysed 3D Bamboo as a Solar Steam Generation Device Evolution of Magnetic and Paramagnetic Behavior in Pyrolyzed Bamboo: Influence of Thermal Treatment and Iron Incorporation Sustainable Bamboo‑Derived Biochar as a Functional Enzyme Support: Effect of Pyrolysis Conditions on Biocatalytic Polymerization
Ginoble Pandoli, Omar	Untreated Bamboo-derived carbons as sustainable anode material for sodium-ion batteries
Ginzburg, Anton	Reliability of milligram-scale high-throughput screening for evaluating polyolefin chemical recycling in the melt with heterogeneous catalysis
Giorcelli, Mauro	Iron tailored biochar for waterborne bacteriar treatment Tailored biochar based composited for electromagnetic enhanced composite preparation
Giordano, Giulia	Spent coffee biochar contained poly(dimethylsiloxane) composites as membranes for gas separation
Giraldo, Giorgia	Air Quality Monitoring in Museum Environment Using Magic Chemisorbers
Giudicianni, Paola	Heating rate and solid residence time effects on carbon transformation pathways in slow and fast pyrolysis of woody and herbaceous residues Integrated Computational, Experimental, and Kinetic Modeling Study of the Pyrolysis Mechanisms of Hemicellulose Molecular Constituents Effects of phase separation and storage temperature in slow pyrolysis bio-oils: insights from a 145-days monitoring study Turning agro-industrial pruning residues into biochar: insights from slow pyrolysis and value chain analysis Effect of pyrolysis temperature on the Cristal Violet adsorption performance of ball-milled functionalized biochar Effect of blends of hydrochar and straw during co-pyrolysis for biochar production Slow pyrolysis under recirculated exhaust gas atmospheres: effect of steam on biochar and co-products
Glud, Ronnie N.	Splitless analytical pyrolysis of museum foraminifera tests: historical insights on oceanic plastic pollution
Gluodenis, Thomas	Characterization and Quantification of Microplastics in Water in Mid-Atlantic Watersheds in the United States by Pyrolysis GC-MS
Gobbo, Mariasole	Integrating Hydrothermal Treatment and Microalgal Cultivation for Brewery Spent Grains Valorization
Goma, Dani	Performance of Ni/Al₂O₃, Ni/SiO₂, and Ni/ZrO₂ in the biomass pyrolysis and in-line oxidative steam reforming process for hydrogen production
Gomez Llona, Haritz	Zeolite Catalysed Upgrading of CFRP Pyrolysis Vapours for Enhanced Hydrogen Production
Gomiero, Alessio	Exploring the potential of one-pot microwave-assisted pretreatments coupled with py-gc-ms for the quantification of mps and associated contaminants
Gong, Yan	In-situ study of particle evolution at different stages during coal gasification process Study on the Modification of Coal Gasification Fine Slag for Corn-stalk Pyrolysis Catalysts
Gonzalez, Mauro	Characterization of modified lignin for applications in sustainable biobased formulations
González-Pérez, José A.	Decoding subsurface biomarkers in a Mars-analogue lava tube through analytical pyrolysis and isotope fingerprints
Gorbi, Stefania	Exploring the potential of one-pot microwave-assisted pretreatments coupled with py-gc-ms for the quantification of mps and associated contaminants
Gorrasi, Giuliana	Effect of pyrolysis temperature on the Cristal Violet adsorption performance of ball-milled functionalized biochar
Graf-Kick, Christopher	High-Performance Biochar: Transforming Filler Technology in Plastics
Granollers Mesa, Marta	Thermal conversion of heterogeneous marine polymer waste via catalytic pyrolysis using waste-derived catalysts: assessment of conversion efficiency and product quality for future applications
Grausam, Anita	Long-Duration Low-Temperature Pyrolysis of Wood: From Polymer Degradation to Char Formation
Green, Robert	Comprehensive characterization of pyrolysis oil using GCxGC-TOFMS, FD-TOFMS, and blank tube FI-TOFMS
Greggio, Nicolas	Biodegradable Bioplastics in Soil: Multi-Analytical Evidence of Fragmentation and Soil Organic Matter Changes
Gregoris, Elena	Multi-analytical and multi-matrix approach for microplastics characterization: the synergy of Py-GC/MS and μ-FTIR
Grekov, Deny	Thermogravimetric Insights into Polyethylene Degradation: Effect of Clay-Based Catalyst Acidity and Textural Properties
Grinberg Dana, Alon	Resolving Formic Acid Pyrolysis: Integrating Automated Generation with High-Fidelity Theory
Groppi, Gianpiero	Multi-scale investigation of methane pyrolysis for the simultaneous production of COx-free hydrogen and valuable carbonaceous materials for the steelmaking sector
Grottola, Corinna Maria	Heating rate and solid residence time effects on carbon transformation pathways in slow and fast pyrolysis of woody and herbaceous residues Integrated Computational, Experimental, and Kinetic Modeling Study of the Pyrolysis Mechanisms of Hemicellulose Molecular Constituents Effects of phase separation and storage temperature in slow pyrolysis bio-oils: insights from a 145-days monitoring study Turning agro-industrial pruning residues into biochar: insights from slow pyrolysis and value chain analysis Effect of pyrolysis temperature on the Cristal Violet adsorption performance of ball-milled functionalized biochar Effect of blends of hydrochar and straw during co-pyrolysis for biochar production Slow pyrolysis under recirculated exhaust gas atmospheres: effect of steam on biochar and co-products
Grycová, Barbora	Influence of additives, fillers and pigments via thermo-catalytic pyrolysis of polypropylene and polyethylene over HZSM-5 zeolites. Biowaste Valorization Using a Pilot Scale Continuous Pyrolysis Unit within the ENREGAT Large Research Infrastructure
Gu, Jie	Triple Synergy in Waste Plastic Upcycling: Enhanced BTEX Production via Plasma-Assisted Catalysis over Ga-Modified β-Zeolites
Guarnieri, Alessandro	Can the pyrolysis kinetics of cellulose, hemicellulose and lignin serve as building blocks to describe the behavior of physical mixtures and real biomass?
Guastaferro, Mariangela	Experimental and Modelling Investigation of Primary and Secondary Reactions in LDPE Pyrolysis
Gucho, Eyerusalem	Ex-situ catalytic pyrolysis of paper sludge to bio-BTX on a staged free-fall reactor using three commercial catalysts
Guditi, Roop Chand	Comparison of EGA and py-GCMS Data from naturally and artificially aged polyester urethane.
Guilmont, Marine	Improving the determination of atomic mass balances of biochars produced from biomass pyrolysis Synthesis, characterization and catalytic activity in dry reforming reaction of Ni/C catalysts prepared from different biomasses
Guizani, Chamseddine	Nanoscale Mixing of Cellulose and Lignin Alters Their Pyrolysis Interactions and Derived Carbon Reactivity Cellulose carbonization pathways studied using reactive force field methods
Gul, Jawad	Machine Learning based Optimization of Pyrolysis Oil Yield from Waste Plastics under Sensitivity and Uncertainty Analysis Frameworks
Guo, Hongyuuo	Metagenomic Analysis of Key Methanogenic Pathways in Solid-State Co-anaerobic Fermentation of Weathered Coal and Cattle Manure
Guo, Jinping	Valorization of Non-Edible Vegetable Oil through Zeolite-Catalyzed Pyrolysis: A Model Study on Oleic Acid for Aromatics and SAF Precursors Production
Guo, Junhao	Molecular-Level Investigation of Hydrocarbon Cracking and Early Coke Formation Enabled by an Enhanced Sampling Framework
Guo, Qinghua	In-situ study of particle evolution at different stages during coal gasification process Study on the Modification of Coal Gasification Fine Slag for Corn-stalk Pyrolysis Catalysts
Guo, Xiaojie	Zn-Fe Co-modified HZSM-5/MCM-41 Catalytic Co-pyrolysis of Miscanthus and Polystyrene to Produce Aromatic-Rich Oil
Gutierrez, Omar D	Advances in Catalytic Pyrolysis of Lignocellulosic Biomass for Bio-oil Upgrading Sustainable Bio-oil Production from Sugarcane Bagasse via Catalytic Pyrolysis using Acid-Modified Natural Zeolites Characterization of Ilmenite Mining Waste as a Geocatalyst for Sugarcane Bagasse Pyrolysis
Gómez, Daviel	Mechanistic insights and bifunctional effects in Pd/TiO₂–ZrO₂-catalyzed conversion of pyrolytic limonene to cymene
Gómez-Pozuelo, Gema	Pressure effect on catalytic pyrolysis of eucalyptus over hierarchical BETA zeolite
Gómez-Sánchez, Elena	Comparison of EGA and py-GCMS Data from naturally and artificially aged polyester urethane.
Gökalp, Iskender	PYROLYSIS CHARACTERISTICS AND THERMO-KINETIC PARAMETERS FOR HYDROCHARS PRODUCED FROM AGRICULTURAL INDUSTRIES
H
Haddad, Sanad	Thermogravimetric and Kinetic Study of Pomegranate Peel, Prickly Pear Peel, and Their Mixture for Bioenergy Applications
Hainthaler, Andrea	Conversion of hazelnut shell waste into hard carbon materials for the sustainable production of hybrid capacitors
Hamouche, Mohamed Abderrahim	Synthesis and characterization of a promising energetic nitrochitosan
Han, Zhennan	Oxidative torrefaction of biomass in a fluidized bed to produce biochar with high grindability
Hansen, Brian B.	Influence of fluid bed operating conditions on waste pyrolysis products
Hansmann, Christian	Long-Duration Low-Temperature Pyrolysis of Wood: From Polymer Degradation to Char Formation
Hantao, Leandro W.	Microwave-assisted treatment to convert commercial polyethylene microbeads into a liquid suspension used as reference material for Py-GC-MS
Hao, Yusi	Enhanced hydrocarbons generation of cyclic catalytic pyrolysis of acid-washed sweet sorghum stalk through Mo/HZSM-5
Harvey, Nikita	Addressing Matrix Effects in Micro- and Nanoplastic Quantification Using Pyrolysis-GC-cIMS-HRMS
Hashmi, Farhan	Pyrolysis of multilayer plastics: Optimising the process
Haugen, Nils Erland L	Model for Cellulose Pyrolysis Combining Kinetic Monte Carlo Simulation and Vapor-Liquid Equilibrium.
Hayashi, Jun-Ichiro	Gas-phase thermal stability of levoglucosenone derived from biomass pyrolysis
He, Qing	Reliability of milligram-scale high-throughput screening for evaluating polyolefin chemical recycling in the melt with heterogeneous catalysis
He, Songbo	Ex-situ catalytic pyrolysis of paper sludge to bio-BTX on a staged free-fall reactor using three commercial catalysts Heating rate of the rotary-kiln reactor on the pyrolysis of waste plastics Valorization of Non-Edible Vegetable Oil through Zeolite-Catalyzed Pyrolysis: A Model Study on Oleic Acid for Aromatics and SAF Precursors Production
Heeres, Hero Jan	Ex-situ catalytic pyrolysis of paper sludge to bio-BTX on a staged free-fall reactor using three commercial catalysts Mechanisms of Different Carbon Sources in the Catalytic Preparation of Carbon Nanotubes via Plastic Pyrolysis Experimental and Modelling Studies on Biomass Pyrolysis in Molten Salts Optimization of catalytic hydrocarbon aromatization to BTX in a lab-scale fluidized bed reactor Green hydrothermal synthesis of catechol from 2-acetylfuran
Heise, Katja	Pressure carbonisation of iron doped cellulose Pickering Emulsions towards catalytical applications
Henao, Juan Esteban	On the purification of tire pyrolysis oil using a lab-scale TRL-4 packed distillation column for limonene and BTEX recovery
Henrotte, Jules	Reliability of milligram-scale high-throughput screening for evaluating polyolefin chemical recycling in the melt with heterogeneous catalysis
Herrera, Rene	Analysis of Biocompounds Released in the Gaseous Effluent during Slow Pyrolysis of Hemp Effect of extraction pretreatments on composition and porosity of biochar from Quercus robur bark
Hertzog, Jasmine	THE POWER OF SILYLATION: TOWARD A MOLECULAR DESCRIPTION OF LIQUIDS FROM THERMOCHEMICAL PROCESSES Catalytic hydrotreatment efficiency on HTL biocrudes from two microalgae strains, Chlorella sorokiniana and Chlorella vulgaris, evidenced by FT-ICR MS
Hertzog, Jasmine	High-throughput on-line mass spectrometry screening of catalytic fast pyrolysis of cellulose over ZSM-5 zeolites
Hesse, Robin	Impact of stabilizers on the pyrolysis mechanism in chemical recycling of polyvinyl chloride waste
Heynderickx, Philippe	Effect of Hydrothermal Carbonization Conditions on Carbon Partitioning and Catalytic Pyrolysis of Fish-Based Biomass
Hill, Josephine M.	Effect of Water Content in Activated Carbon on the Low-Temperature Microwave-Assisted Pyrolysis of HDPE
Hoesuk, Yim	Co-pyrolysis Characteristics of Polyethylene and Biomass in a Bubbling Fluidized Bed Catalytic co-pyrolysis of woody biomass and waste plastics: mechanistic insights into selective BTX production
Hoffman, Charlotte	Analytical Investigation of Cyclohexanone Resins for Cultural Heritage by Evolved Gas analysis-MS and Double-shot Py-GC/MS
Hommes, Arne	Experimental and Modelling Studies on Biomass Pyrolysis in Molten Salts Optimization of catalytic hydrocarbon aromatization to BTX in a lab-scale fluidized bed reactor
Honda, Takayuki	Scientific Analysis of Lacquerware Bearing Stamp Patterns Excavated from Different Archaeological Sites Chronological Characterization of Airborne Microplastics in Kanagawa, Japan by Pyrolysis-Gas Chromatography/Mass Spectrometry Study on the Recovery Method for Lacquer films in Epoxy Resin-Embedded Samples for Stratified Analysis by Py-GC/MS
Hossain, Abul	Valorisation of intermediate pyrolysis oils from woody biomass towards marine residual fuels
Houthuijs, Kas	Py‑GC‑MS method development and validation for micro‑ and nanoplastics in human breast milk and bile Addressing Matrix Effects in Micro- and Nanoplastic Quantification Using Pyrolysis-GC-cIMS-HRMS
Hu, Haoquan	Performance and synergistic mechanism on co-pyrolysis of PVC/ PVC-containing mixed plastics and coal Investigation on sulfur distribution and chemical forms in products from co-pyrolysis of coal and waste tire High-temperature pyrolysis of pine sawdust using metallurgical slag as oxygen carrier and gasification of solid residues A novel application of the spontaneous liquid-gas imbibition method for pore structure characterization in pyrolytic porous materials Hydrogen transfer and reaction mechanism during gradient temperature pyrolysis of coal under steam atmosphere In-situ detection of catalytic cracking of Naomaohu pyrolysis volatiles over Fe and Al components in red mud Effect of coal macromolecular network fragments on char during coal pyrolysis
Hu, Yanjun	Evolution Mechanism of Mechanical Properties of Recycled Glass Fibers during Pyrolysis–Oxidation Treatment of Waste Wind Turbine Blades
Hua, Wenbin	Hydrogen-Rich Syngas Production from Biomass via Low-Temperature Pyrolysis coupled Gasification of Biochar-oil briquette fuels
Huang, Guoqing	A Novel Strategy for Recycling Waste Wind Turbine Blades under Steam and Air Conditions: Chemical Recovery and Char Removal
Huang, Wei	Insight into the pyrolysis behavior of tar-rich coal via infrared fast heating
Huang, Xin	A Novel Strategy for Recycling Waste Wind Turbine Blades under Steam and Air Conditions: Chemical Recovery and Char Removal Plasma and ball milling pretreatment for enhanced production of levoglucosenone from catalytic conversion of cellulose over a sulfonated carbon catalyst
Huang, Yongda	Interaction mechanism of organic components during decommissioned pv laminates oxidative pyrolysis for sustainable recycling
Huang, Zan	Catalytic Selective Hydrogenolysis of Coal-based Aromatic Ethers
Hummel, Michael	Nanoscale Mixing of Cellulose and Lignin Alters Their Pyrolysis Interactions and Derived Carbon Reactivity Cellulose carbonization pathways studied using reactive force field methods
Hwang, Sejin	Catalytic Pyrolysis of Organic Waste over Nanosponge Zeolite for Enhanced Aromatic Hydrocarbon Production Catalytic co-pyrolysis of woody biomass and waste plastics: mechanistic insights into selective BTX production
I
Iannetti, Giacomo	Ex-situ catalytic pyrolysis of paper sludge to bio-BTX on a staged free-fall reactor using three commercial catalysts
Ilchenko, Oleksandr	High-Performance Software for Deconvolution and Annotation of Py-GC/MS Data for Lignocellulosic Biopolymer Characterization
Inayat, Amer	Influence of additives, fillers and pigments via thermo-catalytic pyrolysis of polypropylene and polyethylene over HZSM-5 zeolites. Sustainable valorization of plastic waste via zeolite-catalyzed pyrolysis and in-line CO2 reforming over Ni-Co-based catalysts Effect of Water Content in Activated Carbon on the Low-Temperature Microwave-Assisted Pyrolysis of HDPE
Inose, Satoshi	Chronological Characterization of Airborne Microplastics in Kanagawa, Japan by Pyrolysis-Gas Chromatography/Mass Spectrometry
Ionescu, Gabriela	Investigation of bones waste catalytic pyrolysis for bio-based compounds production
Ishida, Yasuyuki	Enhanced Processing Ability with a Newly Designed Underwater Microparticle Collection Device for Pyrolysis-GC/MS of Microplastics Quantitative Analysis of Trace PTFE in Polymer Materials by Double-Shot Pyrolysis-GC/MS Fundamental Study on Abnormal Peak Appearance in the Mid-Boiling Point Range in Pyrolysis-GC/MS
Ishimura, Takahisa	Enhanced Processing Ability with a Newly Designed Underwater Microparticle Collection Device for Pyrolysis-GC/MS of Microplastics
J
Jahansson, Ann-Christine	Upgrading fast‑pyrolysis chars through thermal stabilization: analytical insights and implications for their use
Jalalinejad, Amir	Representation of lignin derived oligomers in pyrolysis bio-oil: Advances towards improved prediction of vapor liquid equilibria for controlling bio-oil quality
Jamil Abdulrahman, Anas	Comprehensive Upgrading of Plastic-Derived Pyrolysis Oil to Improve the Quality of Steam Cracking Feedstock
Jang, Hana	A Comparative Study of GHG Reduction Assessment by Pyrolysis and Combustion Technology of Waste Biomass
Jankovská, Zuzana	Novel activated bonechar prepared by microwave pyrolysis of waste animal bones for xylene adsorption from air
Januszewicz, Katarzyna	Activated Carbon-Based Catalyst Supports for Dry Methane Reforming and Coke Formation
Jayathilake, Rukshan Madhawa	Study on CO2 activation on properties of biochar
Jeaidi, Jawad	Characterization of Volatile Carbonyl Compounds in Biorefinery Streams using SPME-GC: Implications for Occupational Health and Safety
Jean-Gil, Adrián	Exploring the potential of one-pot microwave-assisted pretreatments coupled with py-gc-ms for the quantification of mps and associated contaminants
Jensen, Anker D.	Influence of fluid bed operating conditions on waste pyrolysis products
Jensen, Peter Arendt	Influence of fluid bed operating conditions on waste pyrolysis products
Jeon, I-Jeong	Spray pyrolysis synthesis of Cu-CeO2-ZrO2 catalysts with enhanced oxygen storage capacity for reverse water-gas shift reaction Structurally stable methanation-resistant catalysts for the reverse water-gas shift reaction
Jeon, Jong-Ki	Catalytic co-pyrolysis of woody biomass and waste plastics: mechanistic insights into selective BTX production
Jeon, Kyung-Won	Spray pyrolysis synthesis of Cu-CeO2-ZrO2 catalysts with enhanced oxygen storage capacity for reverse water-gas shift reaction Structurally stable methanation-resistant catalysts for the reverse water-gas shift reaction
Jeong, Soo-Hwa	MOLTEN KOH-ACTIVATED CONVERSION OF PYROLYSIS CHAR DERIVED FROM MIXED PLASTIC INTO HIERARCHICAL POROUS CARBON FOR SUPERCAPACITOR ELECTRODES Characteristics of pyrolysis products from waste polyolefin plastics using 15 kg/hr continuous auger system
Jerzak, Wojciech	Thermal conversion of heterogeneous marine polymer waste via catalytic pyrolysis using waste-derived catalysts: assessment of conversion efficiency and product quality for future applications
Ji, Guozhao	Decomposition kinetics and product distribution of a very fast pyrolysis of algal biomass
Jia, Liangyuan	Catalytic fast pyrolysis of biomass over hierarchical zeolites: comparison of mordenite, beta and ZSM-5
Jia, Xin	Oxidative torrefaction of biomass in a fluidized bed to produce biochar with high grindability
Jiang, Anqi	Thermal-Analysis-Based Characterization of the Heating-Combustion Boundary in Biomass Systems
Jiang, Hao	Insight into the pyrolytic characteristic and heavy metal immobilization during the co-pyrolysis of phytoremediation biomass with duckweed
Jiménez, Romel	Mechanistic insights and bifunctional effects in Pd/TiO₂–ZrO₂-catalyzed conversion of pyrolytic limonene to cymene
Jiménez-Morillo, Nicasio T.	Decoding subsurface biomarkers in a Mars-analogue lava tube through analytical pyrolysis and isotope fingerprints
Jiménez-Rodríguez, L.	Bifunctional magnetic Co3O4-B/C catalysts for the thermochemical conversion of non-reciclable plastic waste
Jin, Lijun	Performance and synergistic mechanism on co-pyrolysis of PVC/ PVC-containing mixed plastics and coal Investigation on sulfur distribution and chemical forms in products from co-pyrolysis of coal and waste tire In-situ detection of catalytic cracking of Naomaohu pyrolysis volatiles over Fe and Al components in red mud Effect of coal macromolecular network fragments on char during coal pyrolysis
Jin, Xuanjun	Waste-to-Jet Upgrading of Aromatic-Rich Pyrolysis Oil from Cotton/Polyester Textile Waste into High-Density Cycloalkane SAF
Jobst, Karl	Addressing Matrix Effects in Micro- and Nanoplastic Quantification Using Pyrolysis-GC-cIMS-HRMS
Johnson, Robert	Study on biocarbon produced from untreated and water leached bark
Jordens, Jan	Unravelling the chemical complexity of artificially aged tire wear particles by Py-GCxGC-ToFMS
Jordens, Jan	Unravelling the impact of microwave-assisted pre-treatment on tire wear particles by Py-GC-MS
Joseph, Yvonne	Pressure carbonisation of iron doped cellulose Pickering Emulsions towards catalytical applications
Jung, Muhyun	Field Applicability Evaluation of Size-Segregated Microplastics in Air in Representative Metropolitan Areas Using Analytical Pyrolysis–GC/MS
Jung, Muhyun	Characterization of Microplastics in Ambient Air and Their Relationship with PM2.5 Organic Components Using Pyrolysis–GC/MS
Jurkjane, Vilhelmine	Py-GC/MS investigation of the formation of various anhydrosugars from carbohydrates for efficient green chemical synthesis
K
Kang, Jong Hun	Catalytic Pyrolysis of Organic Waste over Nanosponge Zeolite for Enhanced Aromatic Hydrocarbon Production Catalytic co-pyrolysis of woody biomass and waste plastics: mechanistic insights into selective BTX production
Kang, Shigang	Unlocking Lignite’s Value through Structure-Guided Alkaline Depolymerization and Electro-Oxidative Upgrading
Karagöz, Selhan	Impact of process conditions on hydrochars derived from the hydrothermal carbonization of goat manure
Karagöz, Selhan	Volatile composition and thermal behavior of hydrochars produced from carbohydrates and wood biomass
Kasim, Tala	Aqueous-Phase and Acid-Modified Biochar for Sustainable and Resilient Soils
Kawamoto, Haruo	Peeling and Subsequent Radial Degradation Pathways during Cellulose Pyrolysis below 320 °C: Insights from Isothermal TG-MS Analysis Wood Cell Wall Ultrastructure Investigated via Hydrolyzable Sugars in Char and TG-MS Analysis
Kawamoto, Haruo	Thermal Reactivity of the Cellulose Crystalline Core: Insights into Metal Cation Effects via Deuterium Labeling and TG-MS Analysis
Ke, Cunfeng	One-pot synthesis of hierarchical ZSM-5 for lifetime improvement in catalytic conversion of plastic waste
Keelan, Hugh	Integrated Computational, Experimental, and Kinetic Modeling Study of the Pyrolysis Mechanisms of Hemicellulose Molecular Constituents
Khairy, Ahmed	Hydropyrolysis: towards fluorescence-free Raman analysis of internal diesel injector deposits Molecular characterisation of the environmentally labile fraction of biochars by hydropyrolysis
Khakpour, Hamidreza	High Temperature Vortex Pyrolysis of Polyethylene for Ultra High Light Olefin Yields
Khazraie, Tooran	Impact of Oxygen Content on the Storage Stability of Catalytic Fast Pyrolysis Oils: Insights from Pilot Scale Production
Khoshk Rish, Salman	Pressurised pyrolysis of sugarcane bagasse for hydrogen-rich syngas production
Kilic, Yusuf Tolunay	In-situ Pyrolysis Vapor Recirculation in a Continuous Auger Reactor: Characterization of Bio-oil from Pyrolysis of Pine Bark
Kim, Chang-Hyeon	Spray pyrolysis synthesis of Cu-CeO2-ZrO2 catalysts with enhanced oxygen storage capacity for reverse water-gas shift reaction Structurally stable methanation-resistant catalysts for the reverse water-gas shift reaction
Kim, Jong-Su	MOLTEN KOH-ACTIVATED CONVERSION OF PYROLYSIS CHAR DERIVED FROM MIXED PLASTIC INTO HIERARCHICAL POROUS CARBON FOR SUPERCAPACITOR ELECTRODES Characteristics of pyrolysis products from waste polyolefin plastics using 15 kg/hr continuous auger system
Kim, Jong-Woo	Stepwise Thermochemical Conversion Strategies for Waste Plastics: Coupling Auger and Fluidized Bed Reactors for PE and PVC Valorization
Kim, Joo-Sik	Stepwise Thermochemical Conversion Strategies for Waste Plastics: Coupling Auger and Fluidized Bed Reactors for PE and PVC Valorization
Kim, Nayoung	Characterization of Microplastics in Ambient Air and Their Relationship with PM2.5 Organic Components Using Pyrolysis–GC/MS
Kim, Nayoung	Field Applicability Evaluation of Size-Segregated Microplastics in Air in Representative Metropolitan Areas Using Analytical Pyrolysis–GC/MS
Kim, Soyeon	Field Applicability Evaluation of Size-Segregated Microplastics in Air in Representative Metropolitan Areas Using Analytical Pyrolysis–GC/MS Characterization of Microplastics in Ambient Air and Their Relationship with PM2.5 Organic Components Using Pyrolysis–GC/MS
Kim, Young-Min	A Tandem Micro Reactor–GC/MS Approach to Probing Catalytic Pyrolysis and High-Pressure Hydropyrolysis of Biomass Enhanced Processing Ability with a Newly Designed Underwater Microparticle Collection Device for Pyrolysis-GC/MS of Microplastics
Kinnertová, Eva	Energetics of torrefied droppings of ZOO animals
Klaptocz, Marek	PyroFriction - New low-temperature biomass pyrolysis technology
Klapötke, Thomas M	Design and characterization of a promising chitin-based energetic polysaccharide
Klemencová, Kateřina	Influence of additives, fillers and pigments via thermo-catalytic pyrolysis of polypropylene and polyethylene over HZSM-5 zeolites.
Klemencová, Kateřina	Biowaste Valorization Using a Pilot Scale Continuous Pyrolysis Unit within the ENREGAT Large Research Infrastructure
Kluska, Jacek	Corn stalk pyrolysis: process characterization and properties of products
Knill, Clemens	Pyrolytic modification of wood enhances its cascaded use
Knüpfer, Paul	Pressure carbonisation of iron doped cellulose Pickering Emulsions towards catalytical applications
Koike, Yuya	Chronological Characterization of Airborne Microplastics in Kanagawa, Japan by Pyrolysis-Gas Chromatography/Mass Spectrometry
Kooy, Elisa	Conversion of cellulose into azaheterocycles through pyrolysis under a reactive NH3 atmosphere
Kordoghli, Sana	Valorizing Blended Spent Coffee Grounds and Date Seeds for Hydro-gen Production: Pyrolysis, Kinetics, and Machine Learning Applications Thermogravimetric and Kinetic Study of Pomegranate Peel, Prickly Pear Peel, and Their Mixture for Bioenergy Applications
Korus, Agnieszka	Fluidised-bed pyrolysis of contaminated biomass – process parameters and product analysis
Korzeniowski, Łukasz	Polymer to fuel-range hydrocarbons: An investigation of thermal and β-zeolite-catalyzed pyrolysis of polypropylene (PP) using Py-GC-MS and Py-FT-IR techniques
Kouraa, Nada	A Robust NLSM-Based Kinetic Approach for Pyrolysis Valorization: Application to Polymers, Biopolymers, and Biomass
Kudo, Shinji	Gas-phase thermal stability of levoglucosenone derived from biomass pyrolysis
Kumagai, Shogo	Inline High-Sensitivity Analysis of Brominated Pyrolysates from TBBPA-Containing Polystyrene Using Py-GC/NICI-MS
Kumagai, Shogo	A Tandem Micro Reactor–GC/MS Approach to Probing Catalytic Pyrolysis and High-Pressure Hydropyrolysis of Biomass
Kumar, Kanak	Microwave-Assisted Catalytic Pyrolysis of Mixed Medical Plastic Waste: Sustainable Hydrocarbon, Fuel gas, and Carbon Material Recovery
Kunz, Simon	Comparison of EGA and py-GCMS Data from naturally and artificially aged polyester urethane.
Kureti, Sven	Pressure carbonisation of iron doped cellulose Pickering Emulsions towards catalytical applications
Kurtz, Tim	Impact of Minerals on the Pyrolysis Behavior and Product Distribution of Polystyrene
Kwon, Eilhann E.	MOLTEN KOH-ACTIVATED CONVERSION OF PYROLYSIS CHAR DERIVED FROM MIXED PLASTIC INTO HIERARCHICAL POROUS CARBON FOR SUPERCAPACITOR ELECTRODES Catalytic Pyrolysis of Organic Waste over Nanosponge Zeolite for Enhanced Aromatic Hydrocarbon Production Catalytic co-pyrolysis of woody biomass and waste plastics: mechanistic insights into selective BTX production
Kyarimpa, Christine	Overcoming matrix and oligomer interferences in pyrolysis GC-MS analysis of microplastics in animal tissue
Küçükağa, Yusuf	Integrating Hydrothermal Carbonization and Pyrolysis for the Revalorization of Sewage Sludge Digestate: A Hybrid Thermochemical-Biological Perspective
L
La Nasa, Jacopo	Unravelling the chemical complexity of artificially aged tire wear particles by Py-GCxGC-ToFMS Exploring the potential of one-pot microwave-assisted pretreatments coupled with py-gc-ms for the quantification of mps and associated contaminants Thermoanalytical techniques for the knowledge of plastic heritage: from chemistry to conservation Assessing airborne microplastics concentrations in indoor working environments using Py-GC-MS Understanding the ageing of polyurethane foams in art and design: a thermoanalytical approach
La Nasa, Jacopo	Unravelling the impact of microwave-assisted pre-treatment on tire wear particles by Py-GC-MS
Labaky, Nour	Biomass pyrolysis in a fixed-bed reactor: effect of pressure and sweep gas velocity
Lagrain, Bert	Pretreatment improving in-situ catalytic pyrolysis of plastic waste feedstocks
Lahtinen, Joona	Pyrolysis of multilayer plastics: Optimising the process
Lamberti, Elena	Effect of pyrolysis temperature on the Cristal Violet adsorption performance of ball-milled functionalized biochar
Lamonier, Jean-François	Catalytic pyrolysis of polyethylene: Effects of shaping zeolite particles and of reactor configuration (in-situ and ex-situ)
Lamoree, Marja	Progress and challenges in quantification of micro- and nanoplastics in human blood Py‑GC‑MS method development and validation for micro‑ and nanoplastics in human breast milk and bile Addressing Matrix Effects in Micro- and Nanoplastic Quantification Using Pyrolysis-GC-cIMS-HRMS
Lanfranchi, Andrea	Untreated Pyrolysed 3D Bamboo as a Solar Steam Generation Device
Lappas, Angelos	Enhancing Syngas Production from Plastic Waste via Catalytic Steam Gasification Chemical recycling of nylon-6 via catalytic pyrolysis for the selective recovery of ε-caprolactam
Lari, Khadija	Optimizing Multifunctional Py‑GC/MS Workflows for Historical Gold Varnishes: First Application to a 17th‑Century Gilt Leather Panel
Laurenti, Dorothée	Catalytic hydrotreatment efficiency on HTL biocrudes from two microalgae strains, Chlorella sorokiniana and Chlorella vulgaris, evidenced by FT-ICR MS
Le Brech, Yann	High-throughput on-line mass spectrometry screening of catalytic fast pyrolysis of cellulose over ZSM-5 zeolites
Le Brech, Yann	Effect of steam and solid residence time on wood pyrolysis-gasification products Biomass pyrolysis in a fixed-bed reactor: effect of pressure and sweep gas velocity Improving the determination of atomic mass balances of biochars produced from biomass pyrolysis Synthesis, characterization and catalytic activity in dry reforming reaction of Ni/C catalysts prepared from different biomasses
Ledesma, Sara	Pyrolysis of end-of-life paddle balls: assessing the kinetics and the recovery of value-added products
Lee, Jai-Young	Synergistic Effects of Co-Hydrothermal Carbonization of PVC and Spent Coffee Grounds for Enhanced Dechlorination and Fuel Quality
Lee, Juhee	Characterization of Microplastics in Ambient Air and Their Relationship with PM2.5 Organic Components Using Pyrolysis–GC/MS
Lee, Juhee	Field Applicability Evaluation of Size-Segregated Microplastics in Air in Representative Metropolitan Areas Using Analytical Pyrolysis–GC/MS
Lee, Kyeonglo	Characterization of Microplastics in Ambient Air and Their Relationship with PM2.5 Organic Components Using Pyrolysis–GC/MS
Lee, Kyeonglo	Field Applicability Evaluation of Size-Segregated Microplastics in Air in Representative Metropolitan Areas Using Analytical Pyrolysis–GC/MS
Lee, Seungtaek	Synergistic Effects of Co-Hydrothermal Carbonization of PVC and Spent Coffee Grounds for Enhanced Dechlorination and Fuel Quality
Lehndorff, Eva	Preliminary application of pyrolysis and TD-GC-MS/MS to study additive leaching from plastics induced by sediment abrasion and fragmentation
Lei, Yicheng	Interaction mechanism of organic components during decommissioned pv laminates oxidative pyrolysis for sustainable recycling
Lei, Zhiping	Unlocking Lignite’s Value through Structure-Guided Alkaline Depolymerization and Electro-Oxidative Upgrading
Lemaître, Thomas	High-throughput on-line mass spectrometry screening of catalytic fast pyrolysis of cellulose over ZSM-5 zeolites
Lemos, Francisco	Chemical recycling of biaxially oriented PP (BOPP) films
Lemos, M. Amélia	Chemical recycling of biaxially oriented PP (BOPP) films
Lengyel, Istvan	Carbon-Catalyzed Methane Pyrolysis in Fluidized-Bed Reactors: Analytical Investigation of Polyaromatic Hydrocarbon Formation and Two-Phase Reactor Modeling
Lenters, Virissa	Py‑GC‑MS method development and validation for micro‑ and nanoplastics in human breast milk and bile
Lenters, Virissa	What are we breathing at home? - Household Micro- and Nanoplastics: Composition, Differences, potential Sources & Determinants
Lewandowski, Marek	Polymer to fuel-range hydrocarbons: An investigation of thermal and β-zeolite-catalyzed pyrolysis of polypropylene (PP) using Py-GC-MS and Py-FT-IR techniques
Leštinský, Pavel	Influence of additives, fillers and pigments via thermo-catalytic pyrolysis of polypropylene and polyethylene over HZSM-5 zeolites. Sustainable valorization of plastic waste via zeolite-catalyzed pyrolysis and in-line CO2 reforming over Ni-Co-based catalysts Effect of Water Content in Activated Carbon on the Low-Temperature Microwave-Assisted Pyrolysis of HDPE
Leštinský, Pavel	Biowaste Valorization Using a Pilot Scale Continuous Pyrolysis Unit within the ENREGAT Large Research Infrastructure
Li, Aijun	Interaction mechanism of organic components during decommissioned pv laminates oxidative pyrolysis for sustainable recycling
Li, Bin	A Strategy for Tuning Pyrolysis and Release Profiles of Reconstituted Tobacco Thermal-Analysis-Based Characterization of the Heating-Combustion Boundary in Biomass Systems The Influence of Physical Parameters and Puffing Conditions on the Thermal Characteristics of Cigar Combustion Cones
Li, Changkuo	Characteristics and mechanism for ex-situ catalytic pyrolysis of oil-based drill cuttings (OBDC) using OBDC pyrolysis slag
Li, Chuang	Insight into the pyrolysis behavior of tar-rich coal via infrared fast heating
Li, Chuanwei	Characteristics and mechanism for ex-situ catalytic pyrolysis of oil-based drill cuttings (OBDC) using OBDC pyrolysis slag
Li, Fuzheng	Heating rate of the rotary-kiln reactor on the pyrolysis of waste plastics
Li, Jiajie	Zn-Fe Co-modified HZSM-5/MCM-41 Catalytic Co-pyrolysis of Miscanthus and Polystyrene to Produce Aromatic-Rich Oil
Li, Jingmei	Ex-situ catalytic pyrolysis of paper sludge to bio-BTX on a staged free-fall reactor using three commercial catalysts
Li, Muhao	Impact of Intra-Particle Heat Conduction on Waste Plastic Pyrolysis Simulation of plastic pyrolysis in a fluidized bed reactor under batch-wise and continuous feeding mode
Li, Na	Ex-situ catalytic pyrolysis of paper sludge to bio-BTX on a staged free-fall reactor using three commercial catalysts
Li, Rundong	Unveiling interactions of enzymatic hydrolysis lignin and waste tires during co-pyrolysis
Li, Xiaoxia	framework for reaction mechanism investigation of pyrolysis process for carbon-based fuels with reactive molecular dynamics simulation Enabling a global view of reaction class in hydrocarbon pyrolysis with ReaxFF MD and machine learning Strategy for revealing thermolysis mechanism of CL-20 cocrystals by ReaxFF MD simulations
Li, Xin	Zn-Fe Co-modified HZSM-5/MCM-41 Catalytic Co-pyrolysis of Miscanthus and Polystyrene to Produce Aromatic-Rich Oil
Li, Yang	Performance and synergistic mechanism on co-pyrolysis of PVC/ PVC-containing mixed plastics and coal Investigation on sulfur distribution and chemical forms in products from co-pyrolysis of coal and waste tire High-temperature pyrolysis of pine sawdust using metallurgical slag as oxygen carrier and gasification of solid residues A novel application of the spontaneous liquid-gas imbibition method for pore structure characterization in pyrolytic porous materials Hydrogen transfer and reaction mechanism during gradient temperature pyrolysis of coal under steam atmosphere In-situ detection of catalytic cracking of Naomaohu pyrolysis volatiles over Fe and Al components in red mud Effect of coal macromolecular network fragments on char during coal pyrolysis
Li, Yuhan	A Strategy for Tuning Pyrolysis and Release Profiles of Reconstituted Tobacco
Li, Yuyang	Pyrolysis-Driven Combustion Energy and Flame Synthesis Research: A Review of Experimental, Kinetic Modeling, and Application Advances
Li, Zhanku	Unlocking Lignite’s Value through Structure-Guided Alkaline Depolymerization and Electro-Oxidative Upgrading
Li, Zhifeng	Enhanced hydrocarbons generation of cyclic catalytic pyrolysis of acid-washed sweet sorghum stalk through Mo/HZSM-5
Liang, Changhai	Catalytic Selective Hydrogenolysis of Coal-based Aromatic Ethers Chemical upcycling of waste plastics over metal–acid bifunctional catalysts
Licursi, Domenico	Conversion of hazelnut shell waste into hard carbon materials for the sustainable production of hybrid capacitors Pyrolysis of marine biomasses with different heating technologies: The case of study of Posidonia Oceanica fibrous spheres
Liepins, Kalvis	Study of liquid and solid product formation after hydrothermal processing of carbohydrate and aromatic biomass derivatives
Lietti, Luca	Can the pyrolysis kinetics of cellulose, hemicellulose and lignin serve as building blocks to describe the behavior of physical mixtures and real biomass?
Lievens, Siebe	Unravelling the chemical complexity of artificially aged tire wear particles by Py-GCxGC-ToFMS Unravelling the impact of microwave-assisted pre-treatment on tire wear particles by Py-GC-MS
Liu, Guozhu	Pressure-Dependent Pyrolysis of Cyclopropanated Fuel exo-TCN: Experiments and Kinetic Modeling Molecular-Level Investigation of Hydrocarbon Cracking and Early Coke Formation Enabled by an Enhanced Sampling Framework
Liu, Jianwei	Insight into the pyrolysis behavior of tar-rich coal via infrared fast heating
Liu, Jinmei	Valorization of Non-Edible Vegetable Oil through Zeolite-Catalyzed Pyrolysis: A Model Study on Oleic Acid for Aromatics and SAF Precursors Production
Liu, Yueyang	Enhanced hydrocarbons generation of cyclic catalytic pyrolysis of acid-washed sweet sorghum stalk through Mo/HZSM-5
Liu, Zilong	The Influence of Physical Parameters and Puffing Conditions on the Thermal Characteristics of Cigar Combustion Cones
Liu, Ziwei	Valorization of Non-Edible Vegetable Oil through Zeolite-Catalyzed Pyrolysis: A Model Study on Oleic Acid for Aromatics and SAF Precursors Production
Locaspi, Andrea	Multi-phase kinetic modeling of LDPE pyrolysis: From condensed-phase degradation to secondary gas-phase reactions
Lombardi, Giacomo	Oxidative Slow Pyrolysis in an Auger Reactor: Autothermal Operation and Process Intensification
Londero, Pablo	Optimizing Multifunctional Py‑GC/MS Workflows for Historical Gold Varnishes: First Application to a 17th‑Century Gilt Leather Panel
Lopez, Gartzen	Hydrogen and syngas production from plastic waste pyrolysis and in line sorption enhanced steam reforming Evaluation of operating conditions on the pyrolysis and in-line catalytic cracking of HDPE over a ZSM5 zeolite catalyst Steam Cracking of HDPE over different FCC Catalysts in a Fountain-Enhanced Conical Spouted Bed Reactor
Lopez Urionabarrenechea, Alex	Zeolite Catalysed Upgrading of CFRP Pyrolysis Vapours for Enhanced Hydrogen Production
Lorenzoni, Renata	Untreated Pyrolysed 3D Bamboo as a Solar Steam Generation Device
Lorgeoux, Catherine	Co-pyrolysis of Polypropylene and asphalt waste: insights into synergistic effects and oil yield optimization Improving liquid and BTEX production via co-pyrolysis of polystyrene and road asphalt waste
Losa, Massimo	Hydrothermal Liquefaction of the invasive macroalga Chaetomorpha linum: Parametric optimization and product characterization
Loubar, Khaled	Thermogravimetric and Kinetic Study of Pomegranate Peel, Prickly Pear Peel, and Their Mixture for Bioenergy Applications
Lova, Paola	Untreated Pyrolysed 3D Bamboo as a Solar Steam Generation Device
Lu, Hantao	In-situ study of particle evolution at different stages during coal gasification process
Lu, Lifang	Pretreatment-catalytic hydrothermal liquefaction of Spirulina: toward high-yield, low-nitrogen biocrude and its prospects as an aviation-fuel precursor
Lu, Qiuxiang	Biomass pyrolysis with Fe-Ni-CaO char-based catalyst for efficient green hydrogen generation and bio-oil upgrading via coupled C–H/O–H activation
Lucarini, Marco	Evolution of Magnetic and Paramagnetic Behavior in Pyrolyzed Bamboo: Influence of Thermal Treatment and Iron Incorporation
Ludlow-Palafox, Carlos	From Lab to Reality: Pyrolysis in Action – Two Decades After PYRO 2006
Lugasi, Solomon Omwoma	Overcoming matrix and oligomer interferences in pyrolysis GC-MS analysis of microplastics in animal tissue
Luo, Guangqian	Interaction mechanism of organic components during decommissioned pv laminates oxidative pyrolysis for sustainable recycling
Lv, Wenqing	Investigation on sulfur distribution and chemical forms in products from co-pyrolysis of coal and waste tire
Lv, Yangguang	Highly efficient selective co-hydrodeoxygenation of bio‑oil and plastic wastes to naphthenes over Co/HZSM‑5
López, José Manuel	Pyrolysis of end-of-life paddle balls: assessing the kinetics and the recovery of value-added products Exploring the thermochemical recycling of polystyrene waste using thermo-oxidative degradation Validating solar relevant PHC:biomass ratios in fluidized bed fast pyrolysis On the purification of tire pyrolysis oil using a lab-scale TRL-4 packed distillation column for limonene and BTEX recovery
López, Vanesa	Characterization of modified lignin for applications in sustainable biobased formulations
López Rodríguez, Encarnación	Assessment of Conventional and Biodegradable Microplastics in Agricultural Soils applying Py-GC/MS Development and Validation of a Py-GC/MS Method for the Simultaneous Determination of Microplastics and Biomicroplastics in Seawater
M
M. Van Geem, Kevin	Comprehensive Upgrading of Plastic-Derived Pyrolysis Oil to Improve the Quality of Steam Cracking Feedstock Reliability of milligram-scale high-throughput screening for evaluating polyolefin chemical recycling in the melt with heterogeneous catalysis Carbon-Catalyzed Methane Pyrolysis in Fluidized-Bed Reactors: Analytical Investigation of Polyaromatic Hydrocarbon Formation and Two-Phase Reactor Modeling High Temperature Vortex Pyrolysis of Polyethylene for Ultra High Light Olefin Yields Heteroatom Transfer and Product Composition of Plastic Waste Pyrolysis The role of branching in polyethylene pyrolysis
Ma, Chuan	A Novel Strategy for Recycling Waste Wind Turbine Blades under Steam and Air Conditions: Chemical Recovery and Char Removal Plasma and ball milling pretreatment for enhanced production of levoglucosenone from catalytic conversion of cellulose over a sulfonated carbon catalyst
Ma, Kaixiang	Effect of lignite Thermal Dissolution Solubles Addition on Coke Reactivity and Its Dissolution Loss Kinetics under a Hydrogen-Rich Atmosphere
Ma, Zhiheng	Bromination mechanism of typical metallic radionuclides on defective graphite surface by HBr：Insight from first principles Evaluation on the migration and occurrence mechanism of impurities in decommissioned nuclear graphite by multi-halogen synergistic roasting
Maekawa, Taiga	Quantification of Polyvinyl Chloride in Atmospheric Particulate Matter Using Pyrolysis GC/MS: Matrix Effects and Marker Behavior
Maestri, Matteo	Multi-scale investigation of methane pyrolysis for the simultaneous production of COx-free hydrogen and valuable carbonaceous materials for the steelmaking sector
Magdziarz, Aneta	Investigation of bones waste catalytic pyrolysis for bio-based compounds production Polymer to fuel-range hydrocarbons: An investigation of thermal and β-zeolite-catalyzed pyrolysis of polypropylene (PP) using Py-GC-MS and Py-FT-IR techniques Thermal conversion of heterogeneous marine polymer waste via catalytic pyrolysis using waste-derived catalysts: assessment of conversion efficiency and product quality for future applications
Magri, Pierre	Extending the Analytical Power of Applied Pyrolysis for Polymers through Online FT-ICR MS Analysis of Heavy Thermo-desorption and Pyrolysis Products
Mallo, Alba	Characterization of modified lignin for applications in sustainable biobased formulations
Manel, Nourine	N-Doped Reduced Graphene Oxide Supported Fe₂O₃: A High-Performance Catalyst for AN-Based Propellants
Manente, Giovanni	Influence of fluid bed operating conditions on waste pyrolysis products Production and characterization of biocrude oil from hydrothermal liquefaction of sludge digestate: findings from an intensive experimental campaign
Mangelinckx, Sven	Conversion of cellulose into azaheterocycles through pyrolysis under a reactive NH3 atmosphere Thermochemistry as synthesis tool for new chemical building blocks from isosorbides and isomannides
Manna, Maria Virginia	Experimental investigation of non-catalytic dry reforming of representative bio-oil compounds Effects of phase separation and storage temperature in slow pyrolysis bio-oils: insights from a 145-days monitoring study
Manyà, Joan J.	Sustainable valorisation of almond residues to hard carbon cathodes for aqueous zinc hybrid supercapacitors Thermochemical synthesis of tin-containing hard carbons from waste hemp hurd for sodium-ion battery anodes
Mapelli, Carlo	Multi-scale investigation of methane pyrolysis for the simultaneous production of COx-free hydrogen and valuable carbonaceous materials for the steelmaking sector Structural tailoring of pyrolysis-derived carbon from thermo-catalytic methane decomposition
Mapelli, Leonardo G.	Structural tailoring of pyrolysis-derived carbon from thermo-catalytic methane decomposition
Marchal, Wouter	Structure–Performance Relationships in Ni/C Catalysts for Power-to-Gas Applications
Marchetti, Letizia	Experimental and Modelling Investigation of Primary and Secondary Reactions in LDPE Pyrolysis
Marculescu, Cosmin	Investigation of bones waste catalytic pyrolysis for bio-based compounds production
Marnellos, Georgios	Enhancing Syngas Production from Plastic Waste via Catalytic Steam Gasification
Marotta, Giusy	Role of active phases based on Fe, Zn and MgCl2 for in-situ upgrading of bio-crude during hydrothermal liquefaction of tannery sludge Effect of blends of hydrochar and straw during co-pyrolysis for biochar production
Marques, Ana C.	Chemical recycling of biaxially oriented PP (BOPP) films
Marra, Francesco Saverio	Pyrolysis-Driven Combustion of Polylactic Acid in Hybrid Aerospace Propulsion
Marrot, Laetitia	Analysis of Biocompounds Released in the Gaseous Effluent during Slow Pyrolysis of Hemp Effect of extraction pretreatments on composition and porosity of biochar from Quercus robur bark
Marsalek, Roman	Development of new forms of carbonaceous adsorbents suitable for water purification: activated biochar for Congo red adsorption Energetics of torrefied droppings of ZOO animals Torrefaction of the ZOO animals droppings
Martaus, Alexandr	Sustainable valorization of plastic waste via zeolite-catalyzed pyrolysis and in-line CO2 reforming over Ni-Co-based catalysts
Martinez Angel, Juan Daniel	Pyrolysis of end-of-life paddle balls: assessing the kinetics and the recovery of value-added products Exploring the thermochemical recycling of polystyrene waste using thermo-oxidative degradation On the purification of tire pyrolysis oil using a lab-scale TRL-4 packed distillation column for limonene and BTEX recovery
Martín-Lara, M.A.	Pyrolysis as the gateway thermochemical route for plastic-to-hydrogen-rich gas valorization
Maruichi, Yasuko	Thermal Reactivity of the Cellulose Crystalline Core: Insights into Metal Cation Effects via Deuterium Labeling and TG-MS Analysis
Marín Sáez, Jesús	Assessment of Conventional and Biodegradable Microplastics in Agricultural Soils applying Py-GC/MS Development and Validation of a Py-GC/MS Method for the Simultaneous Determination of Microplastics and Biomicroplastics in Seawater
Masek, Ondrej	Catalytic pyrolysis of biomass using BECCS-derived ash: enhanced biochar yield, carbon retention, and process performance
Masuda, Yuta	Thermal Reactivity of the Cellulose Crystalline Core: Insights into Metal Cation Effects via Deuterium Labeling and TG-MS Analysis
Masuda, Yuta	Peeling and Subsequent Radial Degradation Pathways during Cellulose Pyrolysis below 320 °C: Insights from Isothermal TG-MS Analysis
Matej-Łukowicz, Karolina	Corn stalk pyrolysis: process characterization and properties of products
Matejova, Lenka	Effect of Water Content in Activated Carbon on the Low-Temperature Microwave-Assisted Pyrolysis of HDPE Novel activated bonechar prepared by microwave pyrolysis of waste animal bones for xylene adsorption from air
Matsueda, Mai	Enhanced Processing Ability with a Newly Designed Underwater Microparticle Collection Device for Pyrolysis-GC/MS of Microplastics
Mattonai, Marco	Unravelling the impact of microwave-assisted pre-treatment on tire wear particles by Py-GC-MS
Mauviel, Guillain	Effect of steam and solid residence time on wood pyrolysis-gasification products
McGregor, Laura	Expanding the pyrolysis toolkit: Automated comparative analysis of complex materials using Py–GC×GC–TOF MS and advanced chemometrics
Meile, Kristine	Analysis of Biocompounds Released in the Gaseous Effluent during Slow Pyrolysis of Hemp Study of liquid and solid product formation after hydrothermal processing of carbohydrate and aromatic biomass derivatives Comparative Study on the Hydrothermal Carbonization of Glucose and Levoglucosan: Understanding Carbon Sphere Formation Pathways Py-GC/MS investigation of the formation of various anhydrosugars from carbohydrates for efficient green chemical synthesis
Mele, Giuseppe	Influence of fluid bed operating conditions on waste pyrolysis products Production and characterization of biocrude oil from hydrothermal liquefaction of sludge digestate: findings from an intensive experimental campaign
Meng, Leangse	Effects of Pyrolysis Temperature on Biochar Yield, CO2 Adsorption Capacity and Kinetic from Coconut Husk Biomass
Mercier, Zoé	Kinetic analysis of biochar formation by Py-GC/MS during fast pyrolysis of lignocellulosic biomass
Meredith, William	Hydropyrolysis: towards fluorescence-free Raman analysis of internal diesel injector deposits Molecular characterisation of the environmentally labile fraction of biochars by hydropyrolysis
Merz, Daniela	Understanding Nitrogen-Induced Catalyst Deactivation in Plastic Waste Pyrolysis from Lab to Pilot Scale Impact of Minerals on the Pyrolysis Behavior and Product Distribution of Polystyrene
Meyer, Naldo	Chemical Recycling of Polypropylene via Heterogeneously Catalyzed Dehydrogenation and Metathesis
Michels, Raymond	Co-pyrolysis of Polypropylene and asphalt waste: insights into synergistic effects and oil yield optimization Improving liquid and BTEX production via co-pyrolysis of polystyrene and road asphalt waste
Micheluz, Anna	Analytical Investigation of Cyclohexanone Resins for Cultural Heritage by Evolved Gas analysis-MS and Double-shot Py-GC/MS Air Quality Monitoring in Museum Environment Using Magic Chemisorbers
Migliaccio, Renata	Role of active phases based on Fe, Zn and MgCl2 for in-situ upgrading of bio-crude during hydrothermal liquefaction of tannery sludge Thermal and Catalytic Pyrolysis of Olive Stone to produce Phenol-rich Bio-oils Thermal and Catalytic co-pyrolysis of Olive Stone and LDPE in a spouted bed reactor for sustainable drop-in Hydrocarbon
Mihan, Shahram	Understanding Nitrogen-Induced Catalyst Deactivation in Plastic Waste Pyrolysis from Lab to Pilot Scale
Miller, Ana Z.	Decoding subsurface biomarkers in a Mars-analogue lava tube through analytical pyrolysis and isotope fingerprints
Minami, Eiji	Peeling and Subsequent Radial Degradation Pathways during Cellulose Pyrolysis below 320 °C: Insights from Isothermal TG-MS Analysis Thermal Reactivity of the Cellulose Crystalline Core: Insights into Metal Cation Effects via Deuterium Labeling and TG-MS Analysis Wood Cell Wall Ultrastructure Investigated via Hydrolyzable Sugars in Char and TG-MS Analysis
Miniati, Alessio	Operation and results of a pilot-plant carbon-moving-bed methane cracking reactor for the production of sustainable hydrogen and solid carbon
Mishra, Ranjeet Kumar	Thermo-Catalytic Co-Pyrolysis of Waste Rain Tree Pods and Natural Rubber: Influence of Temperature, Feed Ratio, and Catalysts on Bio-Oil Yield and its properties
Mishra, Ranjeet Kumar	Pyrolytic conversion of rubber fig leaves into porous carbon material for environmental application
Miskolczi, Norbert	Utilization of plastic waste-derived heavy hydrocarbons as steam cracking feedstock Value added products obtained from pilot scale waste pyrolysis and gasification for circular economy
Mizuguchi, Hitoshi	Quantification of Polyvinyl Chloride in Atmospheric Particulate Matter Using Pyrolysis GC/MS: Matrix Effects and Marker Behavior
Modugno, Francesca	Unravelling the chemical complexity of artificially aged tire wear particles by Py-GCxGC-ToFMS Splitless analytical pyrolysis of museum foraminifera tests: historical insights on oceanic plastic pollution Exploring the potential of one-pot microwave-assisted pretreatments coupled with py-gc-ms for the quantification of mps and associated contaminants Thermoanalytical techniques for the knowledge of plastic heritage: from chemistry to conservation Assessing airborne microplastics concentrations in indoor working environments using Py-GC-MS Understanding the ageing of polyurethane foams in art and design: a thermoanalytical approach
Modugno, Francesca	Unravelling the impact of microwave-assisted pre-treatment on tire wear particles by Py-GC-MS
Mohanty, Kaustubha	Ex-situ catalytic co-pyrolysis of Bamboo and Polystyrene with Nickel, Molybdenum and cobalt impregnated Red Mud for bio-oil synthesis
Mollick, Manomita	Steam Cracking of HDPE over different FCC Catalysts in a Fountain-Enhanced Conical Spouted Bed Reactor
Mombelli, Davide	Structural tailoring of pyrolysis-derived carbon from thermo-catalytic methane decomposition
Montagnaro, Fabio	Role of active phases based on Fe, Zn and MgCl2 for in-situ upgrading of bio-crude during hydrothermal liquefaction of tannery sludge Effect of blends of hydrochar and straw during co-pyrolysis for biochar production
Montagner, Cassiana Carolina	Microwave-assisted treatment to convert commercial polyethylene microbeads into a liquid suspension used as reference material for Py-GC-MS
Montero-Csanady, Alicia Margarita	Pressure effect on catalytic pyrolysis of eucalyptus over hierarchical BETA zeolite
Montreil-Rivera, Fanny	Comprehensive Characterization of Pyrolytic Aqueous Phases for Valorization via Aqueous Phase Reforming
Moreno, Inés	LOW PRESSURE CATALYTIC HYDROPYROLYSIS OF CHLORELLA VULGARIS
Moreno Pascual, Lizet Marlen	Tuning Pyrolysis Temperature to Engineer Bamboo Biochar for Laccase Immobilisation and Water Treatment Sustainable Bamboo‑Derived Biochar as a Functional Enzyme Support: Effect of Pyrolysis Conditions on Biocatalytic Polymerization
Moriguchi, Yuta	Quantification of Polyvinyl Chloride in Atmospheric Particulate Matter Using Pyrolysis GC/MS: Matrix Effects and Marker Behavior
Morineau, Lois	Characterization and quantification of Tire and Road Wear Particles (TRWP) in environmental samples: Integration of Py-GC/MS and Rock-Eval® techniques
Moschos, Moschos	Chemical recycling of nylon-6 via catalytic pyrolysis for the selective recovery of ε-caprolactam
Mouillet, Yohann	Characterization and quantification of Tire and Road Wear Particles (TRWP) in environmental samples: Integration of Py-GC/MS and Rock-Eval® techniques
Mozhiarasi, Velusamy	Detailed Characterization of Leather Solid Wastes Using Analytical Py-GC/MS and TG-IR to Evaluate Resource Recovery Potential
Mu, Lin	Selective Condensation Behavior of Biomass Pyrolysis Vapors at Wide Condensation Temperatures: Component Evolution, Prediction, and Validation
Mucha, Martin	Development of new forms of carbonaceous adsorbents suitable for water purification: activated biochar for Congo red adsorption Energetics of torrefied droppings of ZOO animals Torrefaction of the ZOO animals droppings
Murillo, Ramón	Pyrolysis of end-of-life paddle balls: assessing the kinetics and the recovery of value-added products Exploring the thermochemical recycling of polystyrene waste using thermo-oxidative degradation Validating solar relevant PHC:biomass ratios in fluidized bed fast pyrolysis On the purification of tire pyrolysis oil using a lab-scale TRL-4 packed distillation column for limonene and BTEX recovery
Muzyka, Roksana	Thermal conversion of heterogeneous marine polymer waste via catalytic pyrolysis using waste-derived catalysts: assessment of conversion efficiency and product quality for future applications
Muñoz-Batista, M.J.	Pyrolysis as the gateway thermochemical route for plastic-to-hydrogen-rich gas valorization Bifunctional magnetic Co3O4-B/C catalysts for the thermochemical conversion of non-reciclable plastic waste
N
Nagawa, Christine Betty	Overcoming matrix and oligomer interferences in pyrolysis GC-MS analysis of microplastics in animal tissue
Nakamura, Sadao	Inline High-Sensitivity Analysis of Brominated Pyrolysates from TBBPA-Containing Polystyrene Using Py-GC/NICI-MS
Naqvi, Salman Raza	Machine Learning based Optimization of Pyrolysis Oil Yield from Waste Plastics under Sensitivity and Uncertainty Analysis Frameworks
Nardella, Federica	Py‑GC‑MS method development and validation for micro‑ and nanoplastics in human breast milk and bile Addressing Matrix Effects in Micro- and Nanoplastic Quantification Using Pyrolysis-GC-cIMS-HRMS
Navarro, María Victoria	Pyrolysis of end-of-life paddle balls: assessing the kinetics and the recovery of value-added products Exploring the thermochemical recycling of polystyrene waste using thermo-oxidative degradation
Nawrot, Nicole	Corn stalk pyrolysis: process characterization and properties of products
Negri, Chiara	Multi-scale investigation of methane pyrolysis for the simultaneous production of COx-free hydrogen and valuable carbonaceous materials for the steelmaking sector
Negro, Viviana	Operation and results of a pilot-plant carbon-moving-bed methane cracking reactor for the production of sustainable hydrogen and solid carbon
Neomagus, Hein	Chemical Recycling of Polypropylene via Heterogeneously Catalyzed Dehydrogenation and Metathesis
Neugebauer, Wibke	Analytical Investigation of Cyclohexanone Resins for Cultural Heritage by Evolved Gas analysis-MS and Double-shot Py-GC/MS
Ni, Haorui	Selective Condensation Behavior of Biomass Pyrolysis Vapors at Wide Condensation Temperatures: Component Evolution, Prediction, and Validation
Nicolella, Cristiano	Experimental and Modelling Investigation of Primary and Secondary Reactions in LDPE Pyrolysis
Nicotra, Natalia	Sustainable Bamboo‑Derived Biochar as a Functional Enzyme Support: Effect of Pyrolysis Conditions on Biocatalytic Polymerization
Nie, Kang	Characteristics and mechanism for ex-situ catalytic pyrolysis of oil-based drill cuttings (OBDC) using OBDC pyrolysis slag
Niittylä, Totte	High-Performance Software for Deconvolution and Annotation of Py-GC/MS Data for Lignocellulosic Biopolymer Characterization
Ning, Xueer	Investigation on sulfur distribution and chemical forms in products from co-pyrolysis of coal and waste tire
Nisamaneenate, Jurarat	Effects of Pyrolysis Temperature on Biochar Yield, CO2 Adsorption Capacity and Kinetic from Coconut Husk Biomass
Niu, Ruitao	Bromination mechanism of typical metallic radionuclides on defective graphite surface by HBr：Insight from first principles
Niu, Weisheng	Enhanced hydrocarbons generation of cyclic catalytic pyrolysis of acid-washed sweet sorghum stalk through Mo/HZSM-5
Niwa, Makoto	Quantitative Analysis of Trace PTFE in Polymer Materials by Double-Shot Pyrolysis-GC/MS
Nobre, Catarina	Gas Composition Dynamics in Biomass Gasification Processes
Nogueira, Maria Teresa	Chemical recycling of biaxially oriented PP (BOPP) films
Noguerol, Rosalía	Characterization of modified lignin for applications in sustainable biobased formulations
Nossova, Lioudmila	Comprehensive Characterization of Pyrolytic Aqueous Phases for Valorization via Aqueous Phase Reforming
Nowack, Leon	Pressure carbonisation of iron doped cellulose Pickering Emulsions towards catalytical applications
Nowak, Agnieszka	Aqueous-Phase and Acid-Modified Biochar for Sustainable and Resilient Soils
Nowakowski, Daniel	Biochar from intermediate pyrolysis for enhanced cementitious grouts Rapid biochar quality screening using Hyperspectral Imaging (HI) and Machine Learning (ML) Valorisation of intermediate pyrolysis oils from woody biomass towards marine residual fuels Aqueous-Phase and Acid-Modified Biochar for Sustainable and Resilient Soils
Nóvoa, Tamara	Characterization of modified lignin for applications in sustainable biobased formulations
O
Obalová, Lucie	Biowaste Valorization Using a Pilot Scale Continuous Pyrolysis Unit within the ENREGAT Large Research Infrastructure
Ogawa, Tomoya	Quantification of Polyvinyl Chloride in Atmospheric Particulate Matter Using Pyrolysis GC/MS: Matrix Effects and Marker Behavior
Ogden, James	Expanding the pyrolysis toolkit: Automated comparative analysis of complex materials using Py–GC×GC–TOF MS and advanced chemometrics
Ohm, Luis	Modeling approach for the electromagnetic field and heating of biomass in a microwave reactor using OpenFOAM
Oke, David Gbenga	Production and characterization of biocrude oil from hydrothermal liquefaction of sludge digestate: findings from an intensive experimental campaign
Olazar, Leire	Evaluation of operating conditions on the pyrolysis and in-line catalytic cracking of HDPE over a ZSM5 zeolite catalyst Performance of Ni/Al₂O₃, Ni/SiO₂, and Ni/ZrO₂ in the biomass pyrolysis and in-line oxidative steam reforming process for hydrogen production
Olazar, Martin	Steam Cracking of HDPE over different FCC Catalysts in a Fountain-Enhanced Conical Spouted Bed Reactor
Oliano, Maria Maddalena	Exploiting Fast Pyrolysis Conditions for one-step synthesis of Carbon Dots from Biomass
Omara, Timothy	Overcoming matrix and oligomer interferences in pyrolysis GC-MS analysis of microplastics in animal tissue
Ondreičková, Katarína	From Pyrolysis to Application: Long-Term Evaluation of Sewage Sludge Biochar (Greenchar) in Green Roof Substrates
Ordonez Loza, Javier	Optimization of catalytic hydrocarbon aromatization to BTX in a lab-scale fluidized bed reactor
Orsenigo, Marco	Multi-scale investigation of methane pyrolysis for the simultaneous production of COx-free hydrogen and valuable carbonaceous materials for the steelmaking sector
Ortega, F.	Bifunctional magnetic Co3O4-B/C catalysts for the thermochemical conversion of non-reciclable plastic waste
Ortiz, Konstanza	Structure–Activity Relationships in the Reductive Amination of Furfural over Pd/ZrO₂–TiO₂ Bifunctional Catalysts
Ortiz-Araya, Konstanza	Thermo-metallic engineering of MOF-derived catalysts: Influence on selectivity during biomass-plastic co-hydropyrolysis
Osorio, Marcelo	Characterization of modified lignin for applications in sustainable biobased formulations
Osorio Velasco, Jessi	Experimental and Modelling Studies on Biomass Pyrolysis in Molten Salts
Ouahioune, Sylia	Design and characterization of a promising chitin-based energetic polysaccharide
Ouyang, Yi	High Temperature Vortex Pyrolysis of Polyethylene for Ultra High Light Olefin Yields
Ozkose, Umut Ugur	Extending the Analytical Power of Applied Pyrolysis for Polymers through Online FT-ICR MS Analysis of Heavy Thermo-desorption and Pyrolysis Products
P
P.N., Manisha	Pyrolytic conversion of rubber fig leaves into porous carbon material for environmental application
Paajanen, Antti	Nanoscale Mixing of Cellulose and Lignin Alters Their Pyrolysis Interactions and Derived Carbon Reactivity Evaluating the ReaxFF reactive force field for simulations of cellulose carbonization Cellulose carbonization pathways studied using reactive force field methods
Pacholski A, Pierre	Extending the Analytical Power of Applied Pyrolysis for Polymers through Online FT-ICR MS Analysis of Heavy Thermo-desorption and Pyrolysis Products
Pagliaro, Giuseppe	Fluidised-bed pyrolysis of contaminated biomass – process parameters and product analysis
Painmanakul, Pisut	Effects of Pyrolysis Temperature on Biochar Yield, CO2 Adsorption Capacity and Kinetic from Coconut Husk Biomass
Pakarinen, Olli	Evaluating the ReaxFF reactive force field for simulations of cellulose carbonization Cellulose carbonization pathways studied using reactive force field methods
Pal, Subhan	Detailed Characterization of Leather Solid Wastes Using Analytical Py-GC/MS and TG-IR to Evaluate Resource Recovery Potential
Palumbo, Lorenzo	Assessing airborne microplastics concentrations in indoor working environments using Py-GC-MS
Pamplona, Marisa	Analytical Investigation of Cyclohexanone Resins for Cultural Heritage by Evolved Gas analysis-MS and Double-shot Py-GC/MS Air Quality Monitoring in Museum Environment Using Magic Chemisorbers
Pan, Chunxiu	Unlocking Lignite’s Value through Structure-Guided Alkaline Depolymerization and Electro-Oxidative Upgrading
Panicker, Tanushka Florence	Thermo-Catalytic Co-Pyrolysis of Waste Rain Tree Pods and Natural Rubber: Influence of Temperature, Feed Ratio, and Catalysts on Bio-Oil Yield and its properties
Panizio, Roberta	Conceptual Pathways for the Valorisation of Gasification-Derived Biochars Gas Composition Dynamics in Biomass Gasification Processes Effect of CaO Loading on In-Situ CO2 Capture during Pruning Biomass Gasification
Pantossiti, Georgia	Turning agro-industrial pruning residues into biochar: insights from slow pyrolysis and value chain analysis
Pappijn, Cato	Multi-phase kinetic modeling of LDPE pyrolysis: From condensed-phase degradation to secondary gas-phase reactions
Pariani, Luca Carlomaria	Can the pyrolysis kinetics of cellulose, hemicellulose and lignin serve as building blocks to describe the behavior of physical mixtures and real biomass?
Park, Chul-Woo	Stepwise Thermochemical Conversion Strategies for Waste Plastics: Coupling Auger and Fluidized Bed Reactors for PE and PVC Valorization
Park, Rina	Acid Washing and Carbonization of Biomass Bottom Ash for Recycling into Bio-coke
Park, Young-Kwon	A Tandem Micro Reactor–GC/MS Approach to Probing Catalytic Pyrolysis and High-Pressure Hydropyrolysis of Biomass Catalytic Pyrolysis of Organic Waste over Nanosponge Zeolite for Enhanced Aromatic Hydrocarbon Production Co-pyrolysis Characteristics of Polyethylene and Biomass in a Bubbling Fluidized Bed Catalytic co-pyrolysis of woody biomass and waste plastics: mechanistic insights into selective BTX production Catalytic co-conversion of biodegradalbe polymer and plastics over hierarchical zeolite catalyst
Parker-Jurd, Florence	Chemical markers for tyre wear particles using pyrolysis-GC-MS
Peddis, Davide	Evolution of Magnetic and Paramagnetic Behavior in Pyrolyzed Bamboo: Influence of Thermal Treatment and Iron Incorporation
Pedro, Yasmin	Eucalyptus biomass valorization: evaluation of the influence of slow pyrolysis bio-oil inclusion in refining processes
Peikertová, Pavlína	Novel activated bonechar prepared by microwave pyrolysis of waste animal bones for xylene adsorption from air
Pellis, Alessandro	Sustainable Bamboo‑Derived Biochar as a Functional Enzyme Support: Effect of Pyrolysis Conditions on Biocatalytic Polymerization
Pellis, Alessandro	Tuning Pyrolysis Temperature to Engineer Bamboo Biochar for Laccase Immobilisation and Water Treatment
Pelucchi, Matteo	Integrated Computational, Experimental, and Kinetic Modeling Study of the Pyrolysis Mechanisms of Hemicellulose Molecular Constituents Experimental and Modelling Investigation of Primary and Secondary Reactions in LDPE Pyrolysis
Pelucchi, Matteo	From Gas-Phase Chemistry to Carbon Formation and Deposition: Validation of a Kinetic Framework for Light Hydrocarbons Pyrolysis
Peral, Angel	Pressure effect on catalytic pyrolysis of eucalyptus over hierarchical BETA zeolite
Perreault, Patrice	Carbon-Catalyzed Methane Pyrolysis in Fluidized-Bed Reactors: Analytical Investigation of Polyaromatic Hydrocarbon Formation and Two-Phase Reactor Modeling
Pezzotti, Romano	Structural tailoring of pyrolysis-derived carbon from thermo-catalytic methane decomposition
Pfeifer, Christoph	Long-Duration Low-Temperature Pyrolysis of Wood: From Polymer Degradation to Char Formation
Phanthong, Patchiya	Inline High-Sensitivity Analysis of Brominated Pyrolysates from TBBPA-Containing Polystyrene Using Py-GC/NICI-MS
Piao, Weiling	Valorization of Non-Edible Vegetable Oil through Zeolite-Catalyzed Pyrolysis: A Model Study on Oleic Acid for Aromatics and SAF Precursors Production
Piao, Weiling	Heating rate of the rotary-kiln reactor on the pyrolysis of waste plastics
Piazza, Sara	Cosmetic Residues in Greek Lekythoi from the Necropolis of Spina Investigated by Analytical Pyrolysis
Piazza, Veronica	Can the pyrolysis kinetics of cellulose, hemicellulose and lignin serve as building blocks to describe the behavior of physical mixtures and real biomass? Multi-scale investigation of methane pyrolysis for the simultaneous production of COx-free hydrogen and valuable carbonaceous materials for the steelmaking sector
Piccardi, Augusta	Assessing airborne microplastics concentrations in indoor working environments using Py-GC-MS
Pielichowski, Krzysztof	Unraveling the Pyrolytic Degradation Mechanisms and Recycling Potential of Non-Isocyanate Polyurethanes
Pierucci, Ettore	Biomass pyrolysis in a fixed-bed reactor: effect of pressure and sweep gas velocity
Pinard, Ludovic	High-throughput on-line mass spectrometry screening of catalytic fast pyrolysis of cellulose over ZSM-5 zeolites
Pinard, Ludovic	Catalytic fast pyrolysis of biomass over hierarchical zeolites: comparison of mordenite, beta and ZSM-5
Pinho, Andrea	Eucalyptus biomass valorization: evaluation of the influence of slow pyrolysis bio-oil inclusion in refining processes Advanced molecular elucidation of biogenic contributions from pyrolysis bio-oil co-processed in conventional refining: a viable and sustainable pathway for the energy transition.
Pintus, Valentina	Optimizing Multifunctional Py‑GC/MS Workflows for Historical Gold Varnishes: First Application to a 17th‑Century Gilt Leather Panel
Pipíška, Martin	From Pyrolysis to Application: Long-Term Evaluation of Sewage Sludge Biochar (Greenchar) in Green Roof Substrates
Pirri, Fabrizio	Hydrogen evolution through ammonia borane hydrolysis over iron tailored pig manure biochar catalyst
Pitan, Oluwafeyikemi	Characterization and Quantification of Microplastics in Water in Mid-Atlantic Watersheds in the United States by Pyrolysis GC-MS
Pittura, Lucia	Exploring the potential of one-pot microwave-assisted pretreatments coupled with py-gc-ms for the quantification of mps and associated contaminants
Pizzimenti, Silvia	Exploring the oxidative polymerization of polyunsaturated methyl esters by EGA-MS: a molecular approach to investigate lipid-based polymer networks in historical paint models
Plavniece, Ance	Optimizing Activated Carbon Properties: The Role of Precursor Source, Carbonization and Activation Parameters Study of liquid and solid product formation after hydrothermal processing of carbohydrate and aromatic biomass derivatives Comparative Study on the Hydrothermal Carbonization of Glucose and Levoglucosan: Understanding Carbon Sphere Formation Pathways
Poblete, Jorge	Mechanistic insights and bifunctional effects in Pd/TiO₂–ZrO₂-catalyzed conversion of pyrolytic limonene to cymene
Pohl, Florian	Preliminary application of pyrolysis and TD-GC-MS/MS to study additive leaching from plastics induced by sediment abrasion and fragmentation
Pontes, Nathália	Eucalyptus biomass valorization: evaluation of the influence of slow pyrolysis bio-oil inclusion in refining processes
Poyai, Thaksina	Effects of Pyrolysis Temperature on Biochar Yield, CO2 Adsorption Capacity and Kinetic from Coconut Husk Biomass
Pratali Maffei, Luna	From Gas-Phase Chemistry to Carbon Formation and Deposition: Validation of a Kinetic Framework for Light Hydrocarbons Pyrolysis
Preimesberger, Christoph	Long-Duration Low-Temperature Pyrolysis of Wood: From Polymer Degradation to Char Formation
Premchand, Premchand	Valorisation of reindeer bone via pyrolysis: Product distribution and characterisation for environmental applications
Prestigiacomo, Claudia	Effect of acid and basic pretreatment on the performance of hydrothermal liquefaction of sewage sludge and olive oil pomace as real waste biofeedstocks
Progent, Frédéric	Extending the Analytical Power of Applied Pyrolysis for Polymers through Online FT-ICR MS Analysis of Heavy Thermo-desorption and Pyrolysis Products
Proietti Zaccaria, Remo	Untreated Bamboo-derived carbons as sustainable anode material for sodium-ion batteries
Proietto, Federica	Effect of acid and basic pretreatment on the performance of hydrothermal liquefaction of sewage sludge and olive oil pomace as real waste biofeedstocks
Puentes-Navarro, Bastián	Exploring the role of Acid-modified and Metal (Ni, Co, Ni/Co) impregnated Chilean Natural Zeolite during Catalytic Co-Hydropyrolysis of Biomass/Plastics Catalytic co-hydropyrolysis of biomass/plastic over Chilean natural zeolite modified with acid and impregnated with mono- and bimetallic nickel - cobalt
Pyo, Sumin	Catalytic co-conversion of biodegradalbe polymer and plastics over hierarchical zeolite catalyst
Pátek, Jaroslav	Pyrolysis of Multilayer Plastic Packaging to Yield Steam Cracking Feedstock
Q
Quan, Cui	Production of hydrogen-rich syngas from catalytic reforming of biomass gasification tar coupled with in-situ CO2 capture Pretreatment-catalytic hydrothermal liquefaction of Spirulina: toward high-yield, low-nitrogen biocrude and its prospects as an aviation-fuel precursor Metagenomic Analysis of Key Methanogenic Pathways in Solid-State Co-anaerobic Fermentation of Weathered Coal and Cattle Manure
Quintana, M. Alejandra	Pyrolysis as the gateway thermochemical route for plastic-to-hydrogen-rich gas valorization
Quintero Ramirez, Elizabeth	Advances in Catalytic Pyrolysis of Lignocellulosic Biomass for Bio-oil Upgrading
R
R. Siddhartha, Tatwadhika	Effect of Hydrothermal Carbonization Conditions on Carbon Partitioning and Catalytic Pyrolysis of Fish-Based Biomass
Ra, Howon	Acid Washing and Carbonization of Biomass Bottom Ash for Recycling into Bio-coke
Raffelt, Klaus	Upgrading of Slow Pyrolysis Oil via Mild and Deep Hydrodeoxygenation for Green Marine Fuels
Ragucci, Raffaele	Experimental investigation of non-catalytic dry reforming of representative bio-oil compounds Integrated Computational, Experimental, and Kinetic Modeling Study of the Pyrolysis Mechanisms of Hemicellulose Molecular Constituents Effects of phase separation and storage temperature in slow pyrolysis bio-oils: insights from a 145-days monitoring study Turning agro-industrial pruning residues into biochar: insights from slow pyrolysis and value chain analysis Effect of pyrolysis temperature on the Cristal Violet adsorption performance of ball-milled functionalized biochar Effect of blends of hydrochar and straw during co-pyrolysis for biochar production Slow pyrolysis under recirculated exhaust gas atmospheres: effect of steam on biochar and co-products
Rahman, Mujib	Biochar from intermediate pyrolysis for enhanced cementitious grouts
Ran, Jingyu	A Novel Strategy for Recycling Waste Wind Turbine Blades under Steam and Air Conditions: Chemical Recovery and Char Removal Plasma and ball milling pretreatment for enhanced production of levoglucosenone from catalytic conversion of cellulose over a sulfonated carbon catalyst
Rance, Graham	Hydropyrolysis: towards fluorescence-free Raman analysis of internal diesel injector deposits
Raspolli Galletti, Anna Maria	Conversion of hazelnut shell waste into hard carbon materials for the sustainable production of hybrid capacitors Pyrolysis of marine biomasses with different heating technologies: The case of study of Posidonia Oceanica fibrous spheres
Reddy, Dr. B. Rajasekhar	Microwave-Assisted Catalytic Pyrolysis of Mixed Medical Plastic Waste: Sustainable Hydrocarbon, Fuel gas, and Carbon Material Recovery
Regoli, Francesco	Exploring the potential of one-pot microwave-assisted pretreatments coupled with py-gc-ms for the quantification of mps and associated contaminants
Regueira, Vanesa	Characterization of modified lignin for applications in sustainable biobased formulations
Reid, Jacqueline	Hydropyrolysis: towards fluorescence-free Raman analysis of internal diesel injector deposits
Ren, Chunxing	Enabling a global view of reaction class in hydrocarbon pyrolysis with ReaxFF MD and machine learning Strategy for revealing thermolysis mechanism of CL-20 cocrystals by ReaxFF MD simulations
Ren, Jiaxin	Integrated Computational, Experimental, and Kinetic Modeling Study of the Pyrolysis Mechanisms of Hemicellulose Molecular Constituents
Ren, Shibiao	Unlocking Lignite’s Value through Structure-Guided Alkaline Depolymerization and Electro-Oxidative Upgrading
Rentizelas, Athanasios	Turning agro-industrial pruning residues into biochar: insights from slow pyrolysis and value chain analysis
Renzulli, Francesco	Pyrolysis-Driven Combustion of Polylactic Acid in Hybrid Aerospace Propulsion
Rey, José	Effect of CaO Loading on In-Situ CO2 Capture during Pruning Biomass Gasification
Ribechini, Erika	Evolved Gas Analysis (EGA-MS) for polyethylene quantification in compostable bioplastics shopping bags Artificial and natural UV aging of beeswax: new insights into its chemical composition from Py-GC/MS and SPME-GC/MS
Riccardi, Chiara	Hydrothermal Liquefaction of the invasive macroalga Chaetomorpha linum: Parametric optimization and product characterization
Rijo, Bruna	Conceptual Pathways for the Valorisation of Gasification-Derived Biochars Gas Composition Dynamics in Biomass Gasification Processes Effect of CaO Loading on In-Situ CO2 Capture during Pruning Biomass Gasification
Riorda, Alessio	Operation and results of a pilot-plant carbon-moving-bed methane cracking reactor for the production of sustainable hydrogen and solid carbon
Rizzo, Andrea Maria	Operation and results of a pilot-plant carbon-moving-bed methane cracking reactor for the production of sustainable hydrogen and solid carbon Oxidative Slow Pyrolysis in an Auger Reactor: Autothermal Operation and Process Intensification Upgrading fast‑pyrolysis chars through thermal stabilization: analytical insights and implications for their use
Rodrigues dos Santos, Allyson Leandro	Microwave-assisted treatment to convert commercial polyethylene microbeads into a liquid suspension used as reference material for Py-GC-MS
Roest, Henk	Py‑GC‑MS method development and validation for micro‑ and nanoplastics in human breast milk and bile
Rogaume, Yann	Physico-chemical properties of biochars from four different caribbean biomasses
Rohais, Sébastien	Characterization and quantification of Tire and Road Wear Particles (TRWP) in environmental samples: Integration of Py-GC/MS and Rock-Eval® techniques
Rojas, Myriam	Analytical NMR Framework with Synthetic Lignin Oligomers for Surrogate Modelling of Fast Pyrolysis Bio-Oils and Pyrolignin Fractions
Rombolà, Alessandro	THE POWER OF SILYLATION: TOWARD A MOLECULAR DESCRIPTION OF LIQUIDS FROM THERMOCHEMICAL PROCESSES Cosmetic Residues in Greek Lekythoi from the Necropolis of Spina Investigated by Analytical Pyrolysis Quantification of nano/microplastic in urban atmospheric deposition using pyrolysis-GC-MS Biodegradable Bioplastics in Soil: Multi-Analytical Evidence of Fragmentation and Soil Organic Matter Changes Residual Energy Recovery from Digestate via Py-AD approach: Water-soluble fraction of Bio-oil as Feedstock and its Molecular Characterization by Silylation-GC-MS
Romero González, Roberto	Assessment of Conventional and Biodegradable Microplastics in Agricultural Soils applying Py-GC/MS Development and Validation of a Py-GC/MS Method for the Simultaneous Determination of Microplastics and Biomicroplastics in Seawater
Romero Sarmiento, Maria-Fernanda	Characterization and quantification of Tire and Road Wear Particles (TRWP) in environmental samples: Integration of Py-GC/MS and Rock-Eval® techniques
Romero-Unda, Carlos	Thermo-metallic engineering of MOF-derived catalysts: Influence on selectivity during biomass-plastic co-hydropyrolysis
Ronsse, Frederik	Mechanistic insights and bifunctional effects in Pd/TiO₂–ZrO₂-catalyzed conversion of pyrolytic limonene to cymene Valorization of brewer’s spent grains through cascaded protein recovery and fast pyrolysis of its residues Conversion of cellulose into azaheterocycles through pyrolysis under a reactive NH3 atmosphere Co-Pyrolysis of Greenhouse Tomato Plant Waste Contaminated with Plastics: Influence of Process Parameters and Biochar Potential for Thermal Plasma Treatment Structure–Performance Relationships in Ni/C Catalysts for Power-to-Gas Applications Hydrothermal Carbonization of Sewage Sludge for Thermal Plasma Treatment: Influence of Process Parameters on Energy and Mineral Recovery in Hydrochars Thermochemistry as synthesis tool for new chemical building blocks from isosorbides and isomannides Effect of Hydrothermal Carbonization Conditions on Carbon Partitioning and Catalytic Pyrolysis of Fish-Based Biomass
Rosenau, Thomas	Overcoming matrix and oligomer interferences in pyrolysis GC-MS analysis of microplastics in animal tissue
Rosi, Luca	Integrating Hydrothermal Treatment and Microalgal Cultivation for Brewery Spent Grains Valorization Hydrothermal Liquefaction of the invasive macroalga Chaetomorpha linum: Parametric optimization and product characterization Pyrolysis of marine biomasses with different heating technologies: The case of study of Posidonia Oceanica fibrous spheres
Rosso, Beatrice	Multi-analytical and multi-matrix approach for microplastics characterization: the synergy of Py-GC/MS and μ-FTIR
Rota, Luca	Exploring the potential of one-pot microwave-assisted pretreatments coupled with py-gc-ms for the quantification of mps and associated contaminants
Rousseau, Diederik	Structure–Performance Relationships in Ni/C Catalysts for Power-to-Gas Applications
Rovea, Manuela	Air Quality Monitoring in Museum Environment Using Magic Chemisorbers
Royuela, David	On the purification of tire pyrolysis oil using a lab-scale TRL-4 packed distillation column for limonene and BTEX recovery
Rughi, Alessandro	Thermoanalytical techniques for the knowledge of plastic heritage: from chemistry to conservation Understanding the ageing of polyurethane foams in art and design: a thermoanalytical approach
Ruiz, M. Pilar	Trade-offs between pyrolysis oil quality and valuable chemicals: the case of the co-pyrolysis of HDPE and PET
Ruiz Flores, Diana Cecilia	Trade-offs between pyrolysis oil quality and valuable chemicals: the case of the co-pyrolysis of HDPE and PET
Ruoppolo, Giovanna	Thermal and Catalytic Pyrolysis of Olive Stone to produce Phenol-rich Bio-oils Thermal and Catalytic co-pyrolysis of Olive Stone and LDPE in a spouted bed reactor for sustainable drop-in Hydrocarbon
Russo, Carmela	Pyrolysis-Driven Combustion of Polylactic Acid in Hybrid Aerospace Propulsion Exploiting Fast Pyrolysis Conditions for one-step synthesis of Carbon Dots from Biomass
Rusu, Elena	Understanding Nitrogen-Induced Catalyst Deactivation in Plastic Waste Pyrolysis from Lab to Pilot Scale
Ryll, Fabienne	Influence of Wood Anisotropy on Pyrolysis Behavior: Experimental and Numerical Study
Ryu, Joonjae	Catalytic co-pyrolysis of woody biomass and waste plastics: mechanistic insights into selective BTX production
S
S.B. Ferreira, Ester	Analytical Investigation of Cyclohexanone Resins for Cultural Heritage by Evolved Gas analysis-MS and Double-shot Py-GC/MS
Sabbe, Maarten	Heteroatom Transfer and Product Composition of Plastic Waste Pyrolysis
Sabia, Pino	Experimental investigation of non-catalytic dry reforming of representative bio-oil compounds
Sablier, Michel	Advances in the investigation of cultural heritage materials through the coupling of pyrolysis with GCxGC-MS
Sabri, Touidjine	N-Doped Reduced Graphene Oxide Supported Fe₂O₃: A High-Performance Catalyst for AN-Based Propellants
Sachin Solomon, Sachin	Valorisation of intermediate pyrolysis oils from woody biomass towards marine residual fuels
Sadrolodabaee, Payam	Biochar from intermediate pyrolysis for enhanced cementitious grouts
Saito, Yuko	Inline High-Sensitivity Analysis of Brominated Pyrolysates from TBBPA-Containing Polystyrene Using Py-GC/NICI-MS
Sajdak, Marcin	Thermal conversion of heterogeneous marine polymer waste via catalytic pyrolysis using waste-derived catalysts: assessment of conversion efficiency and product quality for future applications
Sakirler, Fuat	Catalytic and Inhibitory Effects Induced by Noncovalent Interactions between Cellulose and Lignin during Fast Pyrolysis
Salatino, Piero	Heating rate and solid residence time effects on carbon transformation pathways in slow and fast pyrolysis of woody and herbaceous residues Role of active phases based on Fe, Zn and MgCl2 for in-situ upgrading of bio-crude during hydrothermal liquefaction of tannery sludge
Salatino, Piero	Assessment of heterogeneous secondary reactions and the role of char loading in fluidized bed pyrolysis of biomass
Sam, Karen	Characterization and Quantification of Microplastics in Water in Mid-Atlantic Watersheds in the United States by Pyrolysis GC-MS
Sam Adu-Amankwah, Sam	Biochar from intermediate pyrolysis for enhanced cementitious grouts
Samide, Michael	PY-GC-MS as a method for evaluating degradation of paper during material suitability testing
Samorì, Chiara	Biodegradable Bioplastics in Soil: Multi-Analytical Evidence of Fragmentation and Soil Organic Matter Changes
San-Emeterio, Layla M.	Decoding subsurface biomarkers in a Mars-analogue lava tube through analytical pyrolysis and isotope fingerprints
Sanad, Amr	Operation and results of a pilot-plant carbon-moving-bed methane cracking reactor for the production of sustainable hydrogen and solid carbon
Sanahuja, Olga	Exploring the thermochemical recycling of polystyrene waste using thermo-oxidative degradation
Sangare, Diakaridia	PYROLYSIS CHARACTERISTICS AND THERMO-KINETIC PARAMETERS FOR HYDROCHARS PRODUCED FROM AGRICULTURAL INDUSTRIES
Sant'Anna, Silvia	Characterization of Volatile Carbonyl Compounds in Biorefinery Streams using SPME-GC: Implications for Occupational Health and Safety
Santamaria, Laura	Performance of Ni/Al₂O₃, Ni/SiO₂, and Ni/ZrO₂ in the biomass pyrolysis and in-line oxidative steam reforming process for hydrogen production Steam Cracking of HDPE over different FCC Catalysts in a Fountain-Enhanced Conical Spouted Bed Reactor
Santin, Katrin	Hydrogen and syngas production from plastic waste pyrolysis and in line sorption enhanced steam reforming Evaluation of operating conditions on the pyrolysis and in-line catalytic cracking of HDPE over a ZSM5 zeolite catalyst
Santos, Caroline	Characterization of modified lignin for applications in sustainable biobased formulations
Santos, Vanessa	Eucalyptus biomass valorization: evaluation of the influence of slow pyrolysis bio-oil inclusion in refining processes
Sarh, Brahim	THERMOCHEMICAL CONVERSION OF DIGESTATE WASTE FOR HYDROGEN-RICH SYNGAS PRODUCTION USING TGA ENERGY RECOVERY FROM SLAUGHTERHOUSE WASTE: GASIFICATION PERFORMANCE AND DIGESTATE VALORIZATION
Sauro, Francesco	Decoding subsurface biomarkers in a Mars-analogue lava tube through analytical pyrolysis and isotope fingerprints
Scholz-Böttcher, Barbara	What are we breathing at home? - Household Micro- and Nanoplastics: Composition, Differences, potential Sources & Determinants
Schramm, Sébastien	High-throughput on-line mass spectrometry screening of catalytic fast pyrolysis of cellulose over ZSM-5 zeolites
Schramm, Sébastien	Extending the Analytical Power of Applied Pyrolysis for Polymers through Online FT-ICR MS Analysis of Heavy Thermo-desorption and Pyrolysis Products
Schwarzinger, Clemens	Analytical Pyrolysis for the Characterization of Hypercrosslinked Polymers Derivatisation in Analytical Pyrolysis
Schweng, Paul	Analytical Pyrolysis for the Characterization of Hypercrosslinked Polymers
Schönfeld, Sophie	High-Performance Biochar: Transforming Filler Technology in Plastics
Scialdone, Onofrio	Effect of acid and basic pretreatment on the performance of hydrothermal liquefaction of sewage sludge and olive oil pomace as real waste biofeedstocks
Scurr, David	Hydropyrolysis: towards fluorescence-free Raman analysis of internal diesel injector deposits
Sebestyén, Zoltán	Water leaching of wood barks for biocarbon production: Analysis of extractives Effect of pre- and post-treatments on the pyrolysis condensate of pine bark Volatile composition and thermal behavior of hydrochars produced from carbohydrates and wood biomass Impact of process conditions on hydrochars derived from the hydrothermal carbonization of goat manure
Seethamraju, Srinivas	Catalytic Pyrolysis of E-Waste Plastics Using Red Mud
Segura, Cristina	Optimized lignin-derived pyrolytic oils enhance oxidative aging resistance of asphalt binders
Selmanovic, Amina	Effect of extraction pretreatments on composition and porosity of biochar from Quercus robur bark
Sels, Bert	Reliability of milligram-scale high-throughput screening for evaluating polyolefin chemical recycling in the melt with heterogeneous catalysis Design of Experiments for PS pyrolysis in a conical spouted bed reactor Pretreatment improving in-situ catalytic pyrolysis of plastic waste feedstocks Catalytic pyrolysis of polystyrene over zeolite materials toward BTEC fraction production
Semaan, Jean-Noel	PYROLYSIS CHARACTERISTICS AND THERMO-KINETIC PARAMETERS FOR HYDROCHARS PRODUCED FROM AGRICULTURAL INDUSTRIES
Senneca, Osvalda	Pyrolysis-Driven Combustion of Polylactic Acid in Hybrid Aerospace Propulsion Pyrolysis-Driven Iron Redox Systems: A Multifunctional Approach to Hydrogen, Biofuels, and Carbon Capture
Senneca, Osvalda	Exploiting Fast Pyrolysis Conditions for one-step synthesis of Carbon Dots from Biomass
Seo, Joonwon	Acid Washing and Carbonization of Biomass Bottom Ash for Recycling into Bio-coke
Seo, Myungwon	Acid Washing and Carbonization of Biomass Bottom Ash for Recycling into Bio-coke Co-pyrolysis Characteristics of Polyethylene and Biomass in a Bubbling Fluidized Bed
Serghei, Anatoli	Biomass-Driven Engineering of Conductive Biochars: Linking Feedstock, Structure, and Electrical Performance at Constant Density
Serrano, David P.	LOW PRESSURE CATALYTIC HYDROPYROLYSIS OF CHLORELLA VULGARIS
Serrano, David Pedro	Pressure effect on catalytic pyrolysis of eucalyptus over hierarchical BETA zeolite
Shaghaghi, Samaneh	Comparative Thermal Degradation Analysis of Pomegranate, Walnut, and Pistachio Biomasses: Influence of Drying Method on Thermochemical Stability and Volatile Content
Shaj, Densa Ann	Sustainable valorisation of almond residues to hard carbon cathodes for aqueous zinc hybrid supercapacitors
Shao, Jingai	Insight into the pyrolytic characteristic and heavy metal immobilization during the co-pyrolysis of phytoremediation biomass with duckweed
Shao, Yunlin	A Novel Strategy for Recycling Waste Wind Turbine Blades under Steam and Air Conditions: Chemical Recovery and Char Removal Plasma and ball milling pretreatment for enhanced production of levoglucosenone from catalytic conversion of cellulose over a sulfonated carbon catalyst
Shi, Defu	Preparation of carbon nanosheet from molten salts assisted pyrolysis of biomass towards to carbon-negative technology
Shi, Xingshan	Heating rate of the rotary-kiln reactor on the pyrolysis of waste plastics
Shi, Zhiyuan	Catalytic Methane Pyrolysis in Molten Media: From Bubble Dynamics to Tailored Solid Carbon Synthesis and Process Scale-up
Shim, Haneul	Catalytic Pyrolysis of Organic Waste over Nanosponge Zeolite for Enhanced Aromatic Hydrocarbon Production
Shim, Jae-Oh	Spray pyrolysis synthesis of Cu-CeO2-ZrO2 catalysts with enhanced oxygen storage capacity for reverse water-gas shift reaction Structurally stable methanation-resistant catalysts for the reverse water-gas shift reaction
Shimizu, Kaori	Scientific Analysis of Lacquerware Bearing Stamp Patterns Excavated from Different Archaeological Sites
Shiono, Ai	Quantitative Analysis of Trace PTFE in Polymer Materials by Double-Shot Pyrolysis-GC/MS
Shirata, Hibiki	Chronological Characterization of Airborne Microplastics in Kanagawa, Japan by Pyrolysis-Gas Chromatography/Mass Spectrometry
Shokeitei, Pariza	Fundamental Study on Abnormal Peak Appearance in the Mid-Boiling Point Range in Pyrolysis-GC/MS
Shou, Yongbo	Zn-Fe Co-modified HZSM-5/MCM-41 Catalytic Co-pyrolysis of Miscanthus and Polystyrene to Produce Aromatic-Rich Oil
Shui, Hengfu	Unlocking Lignite’s Value through Structure-Guided Alkaline Depolymerization and Electro-Oxidative Upgrading Effect of lignite Thermal Dissolution Solubles Addition on Coke Reactivity and Its Dissolution Loss Kinetics under a Hydrogen-Rich Atmosphere Role of solvent-separated group components and their sub-fractions on coal caking properties
Sierra Jimenez, Valentina	Experimental and Atomistic-Molecular Modeling Contributions to Selective Carbonization and Biochar Engineering
Silva, Raquel	Eucalyptus biomass valorization: evaluation of the influence of slow pyrolysis bio-oil inclusion in refining processes Advanced molecular elucidation of biogenic contributions from pyrolysis bio-oil co-processed in conventional refining: a viable and sustainable pathway for the energy transition.
Sirignano, Mariano	Pyrolysis-Driven Combustion of Polylactic Acid in Hybrid Aerospace Propulsion
Sivanandan, Sajan	Design of Experiments for PS pyrolysis in a conical spouted bed reactor Catalytic pyrolysis of polystyrene over zeolite materials toward BTEC fraction production
Skreiberg, Øyvind	Water leaching of wood barks for biocarbon production: Analysis of extractives Effect of pre- and post-treatments on the pyrolysis condensate of pine bark
Skreiberg, Øyvind	Study on biocarbon produced from untreated and water leached bark
Smeyers, Brent	Reliability of milligram-scale high-throughput screening for evaluating polyolefin chemical recycling in the melt with heterogeneous catalysis Pretreatment improving in-situ catalytic pyrolysis of plastic waste feedstocks Catalytic pyrolysis of polystyrene over zeolite materials toward BTEC fraction production
Smith, Gregory	PY-GC-MS as a method for evaluating degradation of paper during material suitability testing
Smits, Thomas	Catalytic pyrolysis of polystyrene over zeolite materials toward BTEC fraction production
Snape, Colin	Hydropyrolysis: towards fluorescence-free Raman analysis of internal diesel injector deposits Molecular characterisation of the environmentally labile fraction of biochars by hydropyrolysis
Soja, Gerhard	From Pyrolysis to Application: Long-Term Evaluation of Sewage Sludge Biochar (Greenchar) in Green Roof Substrates
Solimene, Roberto	Heating rate and solid residence time effects on carbon transformation pathways in slow and fast pyrolysis of woody and herbaceous residues Assessment of heterogeneous secondary reactions and the role of char loading in fluidized bed pyrolysis of biomass Role of active phases based on Fe, Zn and MgCl2 for in-situ upgrading of bio-crude during hydrothermal liquefaction of tannery sludge Effect of blends of hydrochar and straw during co-pyrolysis for biochar production
Soll, Michael	Quantitative Analysis of Trace PTFE in Polymer Materials by Double-Shot Pyrolysis-GC/MS
Song, Bo	Metagenomic Analysis of Key Methanogenic Pathways in Solid-State Co-anaerobic Fermentation of Weathered Coal and Cattle Manure
Song, Gang	Oxidative torrefaction of biomass in a fluidized bed to produce biochar with high grindability
Song, Hocheol	Catalytic Pyrolysis of Organic Waste over Nanosponge Zeolite for Enhanced Aromatic Hydrocarbon Production Catalytic co-pyrolysis of woody biomass and waste plastics: mechanistic insights into selective BTX production
Song, Xudong	In-situ release detection and mechanism of alkali metals during coal and biomass co-pyrolysis/gasification Evolution characteristics and mechanism of products from large-particle biomass pyrolysis in molten salt media The mechanism of biomass pyrolysis quality improvement catalyzed by calcium oxide-based catalysts
Song, Zhengxian	Effect of coal macromolecular network fragments on char during coal pyrolysis
Sonnbichler, Martin	Fluidised-bed pyrolysis of contaminated biomass – process parameters and product analysis
Sorace, Lorenzo	Evolution of Magnetic and Paramagnetic Behavior in Pyrolyzed Bamboo: Influence of Thermal Treatment and Iron Incorporation
Spencer, Benjamin	Characterization of Volatile Carbonyl Compounds in Biorefinery Streams using SPME-GC: Implications for Occupational Health and Safety
Sperati, Valeria	Untreated Bamboo-derived carbons as sustainable anode material for sodium-ion batteries
Spreutels, Laurent	Comprehensive Characterization of Pyrolytic Aqueous Phases for Valorization via Aqueous Phase Reforming
Srinivaas, M.S. Giridara	Evaluation of recycling potential of wind turbine blade using catalytic pyrolysis and its life cycle assessment
Srinivasan, Santhosh	Detailed Characterization of Leather Solid Wastes Using Analytical Py-GC/MS and TG-IR to Evaluate Resource Recovery Potential
Ssebugere, Patrick	Overcoming matrix and oligomer interferences in pyrolysis GC-MS analysis of microplastics in animal tissue
Stallworth, John	Characterization and Quantification of Microplastics in Water in Mid-Atlantic Watersheds in the United States by Pyrolysis GC-MS
Stanzione, Luigi	Slow pyrolysis under recirculated exhaust gas atmospheres: effect of steam on biochar and co-products
Stapf, Dieter	Understanding Nitrogen-Induced Catalyst Deactivation in Plastic Waste Pyrolysis from Lab to Pilot Scale Impact of Intra-Particle Heat Conduction on Waste Plastic Pyrolysis Impact of Minerals on the Pyrolysis Behavior and Product Distribution of Polystyrene Impact of stabilizers on the pyrolysis mechanism in chemical recycling of polyvinyl chloride waste Simulation of plastic pyrolysis in a fluidized bed reactor under batch-wise and continuous feeding mode
State, Razvan Nicolae	Investigation of bones waste catalytic pyrolysis for bio-based compounds production
Stefanidis, Stylianos	Enhancing Syngas Production from Plastic Waste via Catalytic Steam Gasification Chemical recycling of nylon-6 via catalytic pyrolysis for the selective recovery of ε-caprolactam
Stefanuto, Pierre-Hugues	Unravelling the chemical complexity of artificially aged tire wear particles by Py-GCxGC-ToFMS
Stefanuto, Pierre-Hugues	Unravelling the impact of microwave-assisted pre-treatment on tire wear particles by Py-GC-MS
Stein, Oliver T.	Simulation of plastic pyrolysis in a fluidized bed reactor under batch-wise and continuous feeding mode
Stemmermann, Peter	Impact of Minerals on the Pyrolysis Behavior and Product Distribution of Polystyrene
Stenlund, Hans	High-Performance Software for Deconvolution and Annotation of Py-GC/MS Data for Lignocellulosic Biopolymer Characterization
Straczewski, Grazyna	Understanding Nitrogen-Induced Catalyst Deactivation in Plastic Waste Pyrolysis from Lab to Pilot Scale Impact of stabilizers on the pyrolysis mechanism in chemical recycling of polyvinyl chloride waste
Straka, Petr	Comprehensive Upgrading of Plastic-Derived Pyrolysis Oil to Improve the Quality of Steam Cracking Feedstock Pyrolysis of Multilayer Plastic Packaging to Yield Steam Cracking Feedstock
Su, Hongcai	Hydrogen-Rich Syngas Production from Biomass via Low-Temperature Pyrolysis coupled Gasification of Biochar-oil briquette fuels Highly efficient selective co-hydrodeoxygenation of bio‑oil and plastic wastes to naphthenes over Co/HZSM‑5
Su, Qi	Analytical pyrolysis of bamboo resiudes: a case in point of climate variation in North China Plain during 4th century BC
Suarez Macias, Katherin Dayana	Utilization of plastic waste-derived heavy hydrocarbons as steam cracking feedstock
Sudre, Guillaume	Biomass-Driven Engineering of Conductive Biochars: Linking Feedstock, Structure, and Electrical Performance at Constant Density
Suleiman, Muhammad Yusuf	Accounting for Structural Variability of Lignin in CRECK-S-B Kinetic Models for Pyrolysis across Different Extraction Methods
Sumerskii, Ivan	Overcoming matrix and oligomer interferences in pyrolysis GC-MS analysis of microplastics in animal tissue
Sun, Jiacheng	Catalytic pyrolysis of biomass using BECCS-derived ash: enhanced biochar yield, carbon retention, and process performance
Sun, Lushi	Characteristics and mechanism for ex-situ catalytic pyrolysis of oil-based drill cuttings (OBDC) using OBDC pyrolysis slag
Sun, Quan	Pressurised pyrolysis of sugarcane bagasse for hydrogen-rich syngas production
Sun, Tanglei	Zn-Fe Co-modified HZSM-5/MCM-41 Catalytic Co-pyrolysis of Miscanthus and Polystyrene to Produce Aromatic-Rich Oil
Sun, Xinyue	A comprehensively experimental and kinetic modeling investigation of C6 ketone isomers pyrolysis and oxidation: Insight into effects of isomerism
Szabó, Gergő	Water leaching of wood barks for biocarbon production: Analysis of extractives
Szlęk, Andrzej	Fluidised-bed pyrolysis of contaminated biomass – process parameters and product analysis
Szymkiewicz, Adam	Corn stalk pyrolysis: process characterization and properties of products
Sándor Czirok, István	Water leaching of wood barks for biocarbon production: Analysis of extractives Effect of pre- and post-treatments on the pyrolysis condensate of pine bark Volatile composition and thermal behavior of hydrochars produced from carbohydrates and wood biomass Impact of process conditions on hydrochars derived from the hydrothermal carbonization of goat manure
T
Taguet, Aurélie	Biomass-Driven Engineering of Conductive Biochars: Linking Feedstock, Structure, and Electrical Performance at Constant Density
Tahmasebi, Arash	Pressurised pyrolysis of sugarcane bagasse for hydrogen-rich syngas production
Taira, Daijiro	Wood Cell Wall Ultrastructure Investigated via Hydrolyzable Sugars in Char and TG-MS Analysis
Takahashi-Schmidt, Junko	High-Performance Software for Deconvolution and Annotation of Py-GC/MS Data for Lignocellulosic Biopolymer Characterization
Takayanagi, Toshio	Quantification of Polyvinyl Chloride in Atmospheric Particulate Matter Using Pyrolysis GC/MS: Matrix Effects and Marker Behavior
Takeda, Hiroto	Quantification of Polyvinyl Chloride in Atmospheric Particulate Matter Using Pyrolysis GC/MS: Matrix Effects and Marker Behavior
Takehara, Marcelo Dal Belo	In-situ Pyrolysis Vapor Recirculation in a Continuous Auger Reactor: Characterization of Bio-oil from Pyrolysis of Pine Bark Spatial evolution of mineral phases within pine bark particles during pyrolysis under inert and weakly oxidizing atmospheres
Takeuchi, Masaki	Quantification of Polyvinyl Chloride in Atmospheric Particulate Matter Using Pyrolysis GC/MS: Matrix Effects and Marker Behavior
Taktak, Sirine	Biomass-Driven Engineering of Conductive Biochars: Linking Feedstock, Structure, and Electrical Performance at Constant Density
Tanaka, Ryuta	Scientific Analysis of Lacquerware Bearing Stamp Patterns Excavated from Different Archaeological Sites
Tanaka, Shuhei	Quantitative Analysis of Trace PTFE in Polymer Materials by Double-Shot Pyrolysis-GC/MS
Tanguay-Rioux, Fabrice	Comprehensive Characterization of Pyrolytic Aqueous Phases for Valorization via Aqueous Phase Reforming
Taraba, Boleslav	Development of new forms of carbonaceous adsorbents suitable for water purification: activated biochar for Congo red adsorption Energetics of torrefied droppings of ZOO animals
Tarchoun, Ahmed Fouzi	Thermal Decomposition and Kinetics of a Nitrochitosan-Based Energetic Composite Design and characterization of a promising chitin-based energetic polysaccharide Unraveling the Characteristics and Pyrolysis Mechanism of Energetic Cellulose Carbamate Nitrate Supplemented with Organic Stabilizers Synthesis and characterization of a promising energetic nitrochitosan
Tavakkol, Salar	Understanding Nitrogen-Induced Catalyst Deactivation in Plastic Waste Pyrolysis from Lab to Pilot Scale Impact of Intra-Particle Heat Conduction on Waste Plastic Pyrolysis Impact of Minerals on the Pyrolysis Behavior and Product Distribution of Polystyrene Impact of stabilizers on the pyrolysis mechanism in chemical recycling of polyvinyl chloride waste Simulation of plastic pyrolysis in a fluidized bed reactor under batch-wise and continuous feeding mode
Tekbas, Doga	Catalytic and Inhibitory Effects Induced by Noncovalent Interactions between Cellulose and Lignin during Fast Pyrolysis Modulating Neat and Catalytic Polyolefin Pyrolysis using Damköhler Numbers
Tekin, Kubilay	Volatile composition and thermal behavior of hydrochars produced from carbohydrates and wood biomass
Tekin, Kubilay	Impact of process conditions on hydrochars derived from the hydrothermal carbonization of goat manure
Tennache, Chawki	Effect of Nano structuring on the Decomposition Kinetics of Cellulose Nitrate
Teramae, Norio	Inline High-Sensitivity Analysis of Brominated Pyrolysates from TBBPA-Containing Polystyrene Using Py-GC/NICI-MS
Teramae, Norio	A Tandem Micro Reactor–GC/MS Approach to Probing Catalytic Pyrolysis and High-Pressure Hydropyrolysis of Biomass Quantification of Polyvinyl Chloride in Atmospheric Particulate Matter Using Pyrolysis GC/MS: Matrix Effects and Marker Behavior Enhanced Processing Ability with a Newly Designed Underwater Microparticle Collection Device for Pyrolysis-GC/MS of Microplastics Quantitative Analysis of Trace PTFE in Polymer Materials by Double-Shot Pyrolysis-GC/MS Fundamental Study on Abnormal Peak Appearance in the Mid-Boiling Point Range in Pyrolysis-GC/MS
Thevenon, Florent	Biomass-Driven Engineering of Conductive Biochars: Linking Feedstock, Structure, and Electrical Performance at Constant Density
Thi Hong, Pham	Rapid biochar quality screening using Hyperspectral Imaging (HI) and Machine Learning (ML)
Thi Thu Huong, Hoang	Rapid biochar quality screening using Hyperspectral Imaging (HI) and Machine Learning (ML)
Thielemans, Wim	Pressure carbonisation of iron doped cellulose Pickering Emulsions towards catalytical applications
Thompson, Richard C.	Chemical markers for tyre wear particles using pyrolysis-GC-MS
Thybaut, Joris W.	Carbon-Catalyzed Methane Pyrolysis in Fluidized-Bed Reactors: Analytical Investigation of Polyaromatic Hydrocarbon Formation and Two-Phase Reactor Modeling
Tocharoen, Siraphop	Effects of Pyrolysis Temperature on Biochar Yield, CO2 Adsorption Capacity and Kinetic from Coconut Husk Biomass
Tognotti, Leonardo	Experimental and Modelling Investigation of Primary and Secondary Reactions in LDPE Pyrolysis
Tokarský, Jonáš	Novel activated bonechar prepared by microwave pyrolysis of waste animal bones for xylene adsorption from air
Tolunay Kili, Yusuf	Study on biocarbon produced from untreated and water leached bark
Torri, Cristian	THE POWER OF SILYLATION: TOWARD A MOLECULAR DESCRIPTION OF LIQUIDS FROM THERMOCHEMICAL PROCESSES Fermentability of water-soluble products from HTC-Py-AD processes: comparison of fast and intermediate pyrolysis Comprehensive utilization for hydrothermal conversion products of food waste Quantification of nano/microplastic in urban atmospheric deposition using pyrolysis-GC-MS Biodegradable Bioplastics in Soil: Multi-Analytical Evidence of Fragmentation and Soil Organic Matter Changes Integrating Hydrothermal Carbonization and Pyrolysis for the Revalorization of Sewage Sludge Digestate: A Hybrid Thermochemical-Biological Perspective Residual Energy Recovery from Digestate via Py-AD approach: Water-soluble fraction of Bio-oil as Feedstock and its Molecular Characterization by Silylation-GC-MS
Touidjine, Sabri	Thermal Decomposition and Energetic Behavior of Ammonuim Nitrate modified with Nitrocellulose-Coated AlMg–NGO@nFe₂O₃ Nanothermite Effect of Nano structuring on the Decomposition Kinetics of Cellulose Nitrate
Trache, Djalal	Thermal Decomposition and Kinetics of a Nitrochitosan-Based Energetic Composite Design and characterization of a promising chitin-based energetic polysaccharide Unraveling the Characteristics and Pyrolysis Mechanism of Energetic Cellulose Carbamate Nitrate Supplemented with Organic Stabilizers Synthesis and characterization of a promising energetic nitrochitosan
Traoré, Mohamed	Characterization of modified lignin for applications in sustainable biobased formulations
Traullé, Nathan	High-throughput on-line mass spectrometry screening of catalytic fast pyrolysis of cellulose over ZSM-5 zeolites
Tripathy, Binay Kumar	Pyrolytic conversion of rubber fig leaves into porous carbon material for environmental application
Troiano, Maurizio	Heating rate and solid residence time effects on carbon transformation pathways in slow and fast pyrolysis of woody and herbaceous residues Assessment of heterogeneous secondary reactions and the role of char loading in fluidized bed pyrolysis of biomass
Tsubouchi, Kanta	Study on the Recovery Method for Lacquer films in Epoxy Resin-Embedded Samples for Stratified Analysis by Py-GC/MS
Turco, Michele	Integrated Computational, Experimental, and Kinetic Modeling Study of the Pyrolysis Mechanisms of Hemicellulose Molecular Constituents
Turn, Scott Q	Study on biocarbon produced from untreated and water leached bark
U
Ucar, Suat	Volatile composition and thermal behavior of hydrochars produced from carbohydrates and wood biomass
Uguna, Clement	Molecular characterisation of the environmentally labile fraction of biochars by hydropyrolysis
Umeki, Kentaro	Model for Cellulose Pyrolysis Combining Kinetic Monte Carlo Simulation and Vapor-Liquid Equilibrium. In-situ Pyrolysis Vapor Recirculation in a Continuous Auger Reactor: Characterization of Bio-oil from Pyrolysis of Pine Bark Spatial evolution of mineral phases within pine bark particles during pyrolysis under inert and weakly oxidizing atmospheres
Umeki, Kentaro	Study on biocarbon produced from untreated and water leached bark
Urciuolo, Massimo	Thermal and Catalytic Pyrolysis of Olive Stone to produce Phenol-rich Bio-oils Thermal and Catalytic co-pyrolysis of Olive Stone and LDPE in a spouted bed reactor for sustainable drop-in Hydrocarbon
Uwizeye, Joselyne	Kinetic analysis of biochar formation by Py-GC/MS during fast pyrolysis of lignocellulosic biomass
Uzochukwu, Maryann Ifeoma	Thermogravimetric Insights into Polyethylene Degradation: Effect of Clay-Based Catalyst Acidity and Textural Properties
Uçar, Suat	Impact of process conditions on hydrochars derived from the hydrothermal carbonization of goat manure
V
Vaari, Jukka	Nanoscale Mixing of Cellulose and Lignin Alters Their Pyrolysis Interactions and Derived Carbon Reactivity Evaluating the ReaxFF reactive force field for simulations of cellulose carbonization Cellulose carbonization pathways studied using reactive force field methods
Valdes, Gonzalo	Optimized lignin-derived pyrolytic oils enhance oxidative aging resistance of asphalt binders
Valizadeh, Ali	Spatial evolution of mineral phases within pine bark particles during pyrolysis under inert and weakly oxidizing atmospheres
Van Cleemput, Arthur	Structure–Performance Relationships in Ni/C Catalysts for Power-to-Gas Applications
van der Laan, Luc	Py‑GC‑MS method development and validation for micro‑ and nanoplastics in human breast milk and bile
Van Leuven, Hendrik	Pretreatment improving in-situ catalytic pyrolysis of plastic waste feedstocks
van Santbrink, Bente	What are we breathing at home? - Household Micro- and Nanoplastics: Composition, Differences, potential Sources & Determinants
Van Vaerenbergh, Toon	Reliability of milligram-scale high-throughput screening for evaluating polyolefin chemical recycling in the melt with heterogeneous catalysis Design of Experiments for PS pyrolysis in a conical spouted bed reactor
van Velzen, Martin	Py‑GC‑MS method development and validation for micro‑ and nanoplastics in human breast milk and bile
Van Waeyenberg, Jonathan	Reliability of milligram-scale high-throughput screening for evaluating polyolefin chemical recycling in the melt with heterogeneous catalysis
Van Waeyenberg, Jonathan	Design of Experiments for PS pyrolysis in a conical spouted bed reactor
Vanini, Gabriela	Eucalyptus biomass valorization: evaluation of the influence of slow pyrolysis bio-oil inclusion in refining processes
Vargas Alvarez, Evelyn Guadalupe	Comprehensive utilization of corn cob (Zea Mays) for the production of biofuels and platform molecules through a hybrid bio-thermocatalytic conversion route
Varghese, Robin John	Reliability of milligram-scale high-throughput screening for evaluating polyolefin chemical recycling in the melt with heterogeneous catalysis High Temperature Vortex Pyrolysis of Polyethylene for Ultra High Light Olefin Yields Heteroatom Transfer and Product Composition of Plastic Waste Pyrolysis The role of branching in polyethylene pyrolysis
Vassura, Ivano	Quantification of nano/microplastic in urban atmospheric deposition using pyrolysis-GC-MS
Vastyl, Michal	Effect of Water Content in Activated Carbon on the Low-Temperature Microwave-Assisted Pyrolysis of HDPE
Vattaparambil Sudharsan, Sruthy	Model for Cellulose Pyrolysis Combining Kinetic Monte Carlo Simulation and Vapor-Liquid Equilibrium.
Vavrincová, Lenka	From Pyrolysis to Application: Long-Term Evaluation of Sewage Sludge Biochar (Greenchar) in Green Roof Substrates
Velimirovic, Milica	Unravelling the chemical complexity of artificially aged tire wear particles by Py-GCxGC-ToFMS
Velimirovic, Milica	Unravelling the impact of microwave-assisted pre-treatment on tire wear particles by Py-GC-MS
Venderbosch, Robertus	Experimental and Modelling Studies on Biomass Pyrolysis in Molten Salts
Venditti, Paola	Evolved Gas Analysis (EGA-MS) for polyethylene quantification in compostable bioplastics shopping bags
Vera Otero, Myleidi	Tuning Pyrolysis Temperature to Engineer Bamboo Biochar for Laccase Immobilisation and Water Treatment
Vermeulen, Roel	What are we breathing at home? - Household Micro- and Nanoplastics: Composition, Differences, potential Sources & Determinants
Veses, Alberto	Pyrolysis of end-of-life paddle balls: assessing the kinetics and the recovery of value-added products On the purification of tire pyrolysis oil using a lab-scale TRL-4 packed distillation column for limonene and BTEX recovery
Viggars, Jeol	Hydropyrolysis: towards fluorescence-free Raman analysis of internal diesel injector deposits
Vikanova, Kseniia	Reliability of milligram-scale high-throughput screening for evaluating polyolefin chemical recycling in the melt with heterogeneous catalysis Pretreatment improving in-situ catalytic pyrolysis of plastic waste feedstocks Catalytic pyrolysis of polystyrene over zeolite materials toward BTEC fraction production
Vikanova, Kseniia	Design of Experiments for PS pyrolysis in a conical spouted bed reactor
Villegas-Bolaños, Paola Andrea	Advances in Catalytic Pyrolysis of Lignocellulosic Biomass for Bio-oil Upgrading Sustainable Bio-oil Production from Sugarcane Bagasse via Catalytic Pyrolysis using Acid-Modified Natural Zeolites Characterization of Ilmenite Mining Waste as a Geocatalyst for Sugarcane Bagasse Pyrolysis
Vinu, Ravikrishnan	Optimization of Pre-treatment Protocols for Micro- and Nanoplastics Detection in Human Keratinous and Blood Tissue Samples Using Analytical Py-GC/MS Ex-situ catalytic co-pyrolysis of Bamboo and Polystyrene with Nickel, Molybdenum and cobalt impregnated Red Mud for bio-oil synthesis Evaluation of recycling potential of wind turbine blade using catalytic pyrolysis and its life cycle assessment Detailed Characterization of Leather Solid Wastes Using Analytical Py-GC/MS and TG-IR to Evaluate Resource Recovery Potential
Virtanen, Elli	Evaluating the ReaxFF reactive force field for simulations of cellulose carbonization Cellulose carbonization pathways studied using reactive force field methods
Viscusi, Gianluca	Effect of pyrolysis temperature on the Cristal Violet adsorption performance of ball-milled functionalized biochar
Viteri, Fausto	Validating solar relevant PHC:biomass ratios in fluidized bed fast pyrolysis
Vitzthum, Valérie	Co-pyrolysis of Polypropylene and asphalt waste: insights into synergistic effects and oil yield optimization Improving liquid and BTEX production via co-pyrolysis of polystyrene and road asphalt waste
Voellinger, Théo	High-throughput on-line mass spectrometry screening of catalytic fast pyrolysis of cellulose over ZSM-5 zeolites
Voellinger A, Théo	Extending the Analytical Power of Applied Pyrolysis for Polymers through Online FT-ICR MS Analysis of Heavy Thermo-desorption and Pyrolysis Products
Vogt, Jonas	Understanding Nitrogen-Induced Catalyst Deactivation in Plastic Waste Pyrolysis from Lab to Pilot Scale
Volante, Stefania	Conversion of hazelnut shell waste into hard carbon materials for the sustainable production of hybrid capacitors
Volperts, Aleksandrs	Optimizing Activated Carbon Properties: The Role of Precursor Source, Carbonization and Activation Parameters
Vouvoudi, Evangelia	Chemical recycling of nylon-6 via catalytic pyrolysis for the selective recovery of ε-caprolactam
Vyskočil, Vít	Comprehensive Upgrading of Plastic-Derived Pyrolysis Oil to Improve the Quality of Steam Cracking Feedstock Pyrolysis of Multilayer Plastic Packaging to Yield Steam Cracking Feedstock
W
Wagner, Daniel	Preliminary application of pyrolysis and TD-GC-MS/MS to study additive leaching from plastics induced by sediment abrasion and fragmentation
Wan, Gan	Characteristics and mechanism for ex-situ catalytic pyrolysis of oil-based drill cuttings (OBDC) using OBDC pyrolysis slag
Wang, Chao	Oxidative torrefaction of biomass in a fluidized bed to produce biochar with high grindability
Wang, Chu	Selective Condensation Behavior of Biomass Pyrolysis Vapors at Wide Condensation Temperatures: Component Evolution, Prediction, and Validation
Wang, Chunping	A Strategy for Tuning Pyrolysis and Release Profiles of Reconstituted Tobacco
Wang, Hong-Yan	Efficient catalytic pyrolysis of biomass to light aromatic hydrocarbons over Zn/ZSM-5 Catalytic reforming of lignite pyrolysis volatiles over metal oxide and zeolite tandem catalysts for light aromatics production A comprehensively experimental and kinetic modeling investigation of C6 ketone isomers pyrolysis and oxidation: Insight into effects of isomerism Pyrolysis of C5 Cyclic Hydrocarbons and Derived High-Energy-Density Fuels: Kinetic Modeling and Aromatics Formation Mechanisms
Wang, Jian	Unveiling interactions of enzymatic hydrolysis lignin and waste tires during co-pyrolysis
Wang, Jiaofei	The mechanism of biomass pyrolysis quality improvement catalyzed by calcium oxide-based catalysts
Wang, Jing	Enhanced hydrocarbons generation of cyclic catalytic pyrolysis of acid-washed sweet sorghum stalk through Mo/HZSM-5
Wang, Le	A Strategy for Tuning Pyrolysis and Release Profiles of Reconstituted Tobacco Thermal-Analysis-Based Characterization of the Heating-Combustion Boundary in Biomass Systems The Influence of Physical Parameters and Puffing Conditions on the Thermal Characteristics of Cigar Combustion Cones
Wang, Li	Pressure-Dependent Pyrolysis of Cyclopropanated Fuel exo-TCN: Experiments and Kinetic Modeling
Wang, Liang	Water leaching of wood barks for biocarbon production: Analysis of extractives Study on biocarbon produced from untreated and water leached bark Effect of pre- and post-treatments on the pyrolysis condensate of pine bark Catalytic pyrolysis of biomass using BECCS-derived ash: enhanced biochar yield, carbon retention, and process performance Selective Condensation Behavior of Biomass Pyrolysis Vapors at Wide Condensation Temperatures: Component Evolution, Prediction, and Validation Study on CO2 activation on properties of biochar Simultaneous pyrolysis-activation-doping of biomass for porous N-doped biochar
Wang, Qian	Unlocking Lignite’s Value through Structure-Guided Alkaline Depolymerization and Electro-Oxidative Upgrading
Wang, Ruohan	Analytical pyrolysis of bamboo resiudes: a case in point of climate variation in North China Plain during 4th century BC
Wang, Shurong	Hydrogen-Rich Syngas Production from Biomass via Low-Temperature Pyrolysis coupled Gasification of Biochar-oil briquette fuels Highly efficient selective co-hydrodeoxygenation of bio‑oil and plastic wastes to naphthenes over Co/HZSM‑5
Wang, Shuzhong	Comprehensive utilization for hydrothermal conversion products of food waste
Wang, Xingjun	Leaching and enrichment behaviors of hazardous heavy metal elements in the process of coal gasification
Wang, Xinwen	Enhanced hydrocarbons generation of cyclic catalytic pyrolysis of acid-washed sweet sorghum stalk through Mo/HZSM-5
Wang, Xuebin	Deep insights into fluorine transformation mechanisms during pyrolysis of retired photovoltaic backsheets: Experimental validation and ReaxFF molecular dynamics simulations
Wang, Yang	Zn-Fe Co-modified HZSM-5/MCM-41 Catalytic Co-pyrolysis of Miscanthus and Polystyrene to Produce Aromatic-Rich Oil
Wang, Yihan	High Temperature Vortex Pyrolysis of Polyethylene for Ultra High Light Olefin Yields
Wang, Yu	Wood Cell Wall Ultrastructure Investigated via Hydrolyzable Sugars in Char and TG-MS Analysis
Wang, Yulin	Selective Condensation Behavior of Biomass Pyrolysis Vapors at Wide Condensation Temperatures: Component Evolution, Prediction, and Validation
Wang, Yutong	Molecular-Level Investigation of Hydrocarbon Cracking and Early Coke Formation Enabled by an Enhanced Sampling Framework
Wang, Zhenglin	Oxidative torrefaction of biomass in a fluidized bed to produce biochar with high grindability
Wang, Zhicai	Unlocking Lignite’s Value through Structure-Guided Alkaline Depolymerization and Electro-Oxidative Upgrading
Watanabe, Atsushi	Inline High-Sensitivity Analysis of Brominated Pyrolysates from TBBPA-Containing Polystyrene Using Py-GC/NICI-MS A Tandem Micro Reactor–GC/MS Approach to Probing Catalytic Pyrolysis and High-Pressure Hydropyrolysis of Biomass Quantification of Polyvinyl Chloride in Atmospheric Particulate Matter Using Pyrolysis GC/MS: Matrix Effects and Marker Behavior Enhanced Processing Ability with a Newly Designed Underwater Microparticle Collection Device for Pyrolysis-GC/MS of Microplastics Quantitative Analysis of Trace PTFE in Polymer Materials by Double-Shot Pyrolysis-GC/MS Fundamental Study on Abnormal Peak Appearance in the Mid-Boiling Point Range in Pyrolysis-GC/MS
Watanabe, Chuichi	Inline High-Sensitivity Analysis of Brominated Pyrolysates from TBBPA-Containing Polystyrene Using Py-GC/NICI-MS A Tandem Micro Reactor–GC/MS Approach to Probing Catalytic Pyrolysis and High-Pressure Hydropyrolysis of Biomass Quantification of Polyvinyl Chloride in Atmospheric Particulate Matter Using Pyrolysis GC/MS: Matrix Effects and Marker Behavior Enhanced Processing Ability with a Newly Designed Underwater Microparticle Collection Device for Pyrolysis-GC/MS of Microplastics Quantitative Analysis of Trace PTFE in Polymer Materials by Double-Shot Pyrolysis-GC/MS Fundamental Study on Abnormal Peak Appearance in the Mid-Boiling Point Range in Pyrolysis-GC/MS
Wdowkova, Rozalie	Sustainable valorization of plastic waste via zeolite-catalyzed pyrolysis and in-line CO2 reforming over Ni-Co-based catalysts
Webb, David	Aqueous-Phase and Acid-Modified Biochar for Sustainable and Resilient Soils
Wei, Huanhuan	Enhanced hydrocarbons generation of cyclic catalytic pyrolysis of acid-washed sweet sorghum stalk through Mo/HZSM-5
Wei, Linhuan	Role of solvent-separated group components and their sub-fractions on coal caking properties
Wei, Yingyuan	Valorization of brewer’s spent grains through cascaded protein recovery and fast pyrolysis of its residues
Weichgrebe, Dirk	Detailed Characterization of Leather Solid Wastes Using Analytical Py-GC/MS and TG-IR to Evaluate Resource Recovery Potential
Wen, Yangbing	A Strategy for Tuning Pyrolysis and Release Profiles of Reconstituted Tobacco
Wen, Yuxin	Investigation on sulfur distribution and chemical forms in products from co-pyrolysis of coal and waste tire
Wiinikka, Henrik	Spatial evolution of mineral phases within pine bark particles during pyrolysis under inert and weakly oxidizing atmospheres
Williams, Paul	Triple Synergy in Waste Plastic Upcycling: Enhanced BTEX Production via Plasma-Assisted Catalysis over Ga-Modified β-Zeolites
Winter, Franz	Fluidised-bed pyrolysis of contaminated biomass – process parameters and product analysis
Wojciechowska, Ewa	Corn stalk pyrolysis: process characterization and properties of products
Wong, Hsi-Wu	Catalytic and Inhibitory Effects Induced by Noncovalent Interactions between Cellulose and Lignin during Fast Pyrolysis Modulating Neat and Catalytic Polyolefin Pyrolysis using Damköhler Numbers
Woodward, Robert T.	Analytical Pyrolysis for the Characterization of Hypercrosslinked Polymers
Wright, Matthew	Modulating Neat and Catalytic Polyolefin Pyrolysis using Damköhler Numbers
Wu, Chunfei	Polymer to fuel-range hydrocarbons: An investigation of thermal and β-zeolite-catalyzed pyrolysis of polypropylene (PP) using Py-GC-MS and Py-FT-IR techniques
Wu, Di	Structure–Performance Relationships in Ni/C Catalysts for Power-to-Gas Applications
Wu, Hongwei	Pyrolysis-derived Bioproducts from Biomass for Future Sustainable Development Important Role of Thermal Ejection in Condensable Volatiles Formation during Cellulose Pyrolysis
Wu, Ke	Multi-phase kinetic modeling of LDPE pyrolysis: From condensed-phase degradation to secondary gas-phase reactions
Wu, Ruofei	Study on the Modification of Coal Gasification Fine Slag for Corn-stalk Pyrolysis Catalysts
Wu, Wenjing	Analytical pyrolysis of bamboo resiudes: a case in point of climate variation in North China Plain during 4th century BC
Wu, Xiaoyu	Oxidative torrefaction of biomass in a fluidized bed to produce biochar with high grindability
Wu, Yuting	A novel application of the spontaneous liquid-gas imbibition method for pore structure characterization in pyrolytic porous materials
Wądrzyk, Mariusz	Polymer to fuel-range hydrocarbons: An investigation of thermal and β-zeolite-catalyzed pyrolysis of polypropylene (PP) using Py-GC-MS and Py-FT-IR techniques
Wąsik, Patrycja	Fluidised-bed pyrolysis of contaminated biomass – process parameters and product analysis
X
Xavier, Cijo	Chemical markers for tyre wear particles using pyrolysis-GC-MS
Xia, Sunwen	Preparation of carbon nanosheet from molten salts assisted pyrolysis of biomass towards to carbon-negative technology
Xiao, Haoyu	Mechanisms of Different Carbon Sources in the Catalytic Preparation of Carbon Nanotubes via Plastic Pyrolysis
Xing, Yandong	Zn-Fe Co-modified HZSM-5/MCM-41 Catalytic Co-pyrolysis of Miscanthus and Polystyrene to Produce Aromatic-Rich Oil
Xu, Elvis G.	Splitless analytical pyrolysis of museum foraminifera tests: historical insights on oceanic plastic pollution
Xu, Guangwen	Oxidative torrefaction of biomass in a fluidized bed to produce biochar with high grindability
Xu, Guangwen	Biomass valorization to furfural: minimizing humin byproduct to enhance furfural yield
Xu, Linlin	Characteristics and mechanism for ex-situ catalytic pyrolysis of oil-based drill cuttings (OBDC) using OBDC pyrolysis slag
Xu, Min	Catalytic reforming of lignite pyrolysis volatiles over metal oxide and zeolite tandem catalysts for light aromatics production
Xu, Shaoping	High-temperature pyrolysis of pine sawdust using metallurgical slag as oxygen carrier and gasification of solid residues A novel application of the spontaneous liquid-gas imbibition method for pore structure characterization in pyrolytic porous materials Hydrogen transfer and reaction mechanism during gradient temperature pyrolysis of coal under steam atmosphere
Xue, Weiyang	Heating rate of the rotary-kiln reactor on the pyrolysis of waste plastics
Y
Yalic, Dicle	Upgrading of Slow Pyrolysis Oil via Mild and Deep Hydrodeoxygenation for Green Marine Fuels
Yan, Jingchong	Unlocking Lignite’s Value through Structure-Guided Alkaline Depolymerization and Electro-Oxidative Upgrading Effect of lignite Thermal Dissolution Solubles Addition on Coke Reactivity and Its Dissolution Loss Kinetics under a Hydrogen-Rich Atmosphere
Yan, Jingchong	Role of solvent-separated group components and their sub-fractions on coal caking properties
Yang, Haiping	Mechanisms of Different Carbon Sources in the Catalytic Preparation of Carbon Nanotubes via Plastic Pyrolysis Preparation of carbon nanosheet from molten salts assisted pyrolysis of biomass towards to carbon-negative technology Insight into the pyrolytic characteristic and heavy metal immobilization during the co-pyrolysis of phytoremediation biomass with duckweed
Yang, He	Performance and synergistic mechanism on co-pyrolysis of PVC/ PVC-containing mixed plastics and coal Investigation on sulfur distribution and chemical forms in products from co-pyrolysis of coal and waste tire In-situ detection of catalytic cracking of Naomaohu pyrolysis volatiles over Fe and Al components in red mud Effect of coal macromolecular network fragments on char during coal pyrolysis
Yang, Jingjing	A novel application of the spontaneous liquid-gas imbibition method for pore structure characterization in pyrolytic porous materials
Yang, Juan	Performance and synergistic mechanism on co-pyrolysis of PVC/ PVC-containing mixed plastics and coal
Yang, Kaixuan	Oxidative torrefaction of biomass in a fluidized bed to produce biochar with high grindability
Yang, Mei	Biomass valorization to furfural: minimizing humin byproduct to enhance furfural yield
Yang, Tianhua	Unveiling interactions of enzymatic hydrolysis lignin and waste tires during co-pyrolysis
Yang, Yimin	Analytical pyrolysis of bamboo resiudes: a case in point of climate variation in North China Plain during 4th century BC
Yang, Yu	Effect of coal macromolecular network fragments on char during coal pyrolysis
Yao, Jialong	Effect of lignite Thermal Dissolution Solubles Addition on Coke Reactivity and Its Dissolution Loss Kinetics under a Hydrogen-Rich Atmosphere
Yao, Nai-Yu	Efficient catalytic pyrolysis of biomass to light aromatic hydrocarbons over Zn/ZSM-5
Yasuhara, Moriaki	Splitless analytical pyrolysis of museum foraminifera tests: historical insights on oceanic plastic pollution
Yazdani, Parviz	Carbon-Catalyzed Methane Pyrolysis in Fluidized-Bed Reactors: Analytical Investigation of Polyaromatic Hydrocarbon Formation and Two-Phase Reactor Modeling High Temperature Vortex Pyrolysis of Polyethylene for Ultra High Light Olefin Yields
Yin, Xiaoyan	Highly efficient selective co-hydrodeoxygenation of bio‑oil and plastic wastes to naphthenes over Co/HZSM‑5
Yoon, Chae-Min	Spray pyrolysis synthesis of Cu-CeO2-ZrO2 catalysts with enhanced oxygen storage capacity for reverse water-gas shift reaction Structurally stable methanation-resistant catalysts for the reverse water-gas shift reaction
Yoon, Joo-Hyeong	MOLTEN KOH-ACTIVATED CONVERSION OF PYROLYSIS CHAR DERIVED FROM MIXED PLASTIC INTO HIERARCHICAL POROUS CARBON FOR SUPERCAPACITOR ELECTRODES
Yoon, Sungmin	Acid Washing and Carbonization of Biomass Bottom Ash for Recycling into Bio-coke
Yoonseok, Kim	Co-pyrolysis Characteristics of Polyethylene and Biomass in a Bubbling Fluidized Bed
Yoshioka, Toshiaki	Inline High-Sensitivity Analysis of Brominated Pyrolysates from TBBPA-Containing Polystyrene Using Py-GC/NICI-MS
Yu, Feifan	Plasma and ball milling pretreatment for enhanced production of levoglucosenone from catalytic conversion of cellulose over a sulfonated carbon catalyst
Yu, Guangsuo	In-situ release detection and mechanism of alkali metals during coal and biomass co-pyrolysis/gasification Evolution characteristics and mechanism of products from large-particle biomass pyrolysis in molten salt media The mechanism of biomass pyrolysis quality improvement catalyzed by calcium oxide-based catalysts In-situ study of particle evolution at different stages during coal gasification process Study on the Modification of Coal Gasification Fine Slag for Corn-stalk Pyrolysis Catalysts
Yu, Jia	Layer-Specific Identification of Organic Binders in 17th–18th Century Korean Dancheong by Pyrolysis-GC/MS
Yu, Jianglong	Pressurised pyrolysis of sugarcane bagasse for hydrogen-rich syngas production
Yu, Qingkai	Catalytic Methane Pyrolysis in Molten Media: From Bubble Dynamics to Tailored Solid Carbon Synthesis and Process Scale-up
Yu, Wenxian	Enhanced hydrocarbons generation of cyclic catalytic pyrolysis of acid-washed sweet sorghum stalk through Mo/HZSM-5
Yu, Yun	Important Role of Thermal Ejection in Condensable Volatiles Formation during Cellulose Pyrolysis
Z
Zagrouba, Féthi	Thermogravimetric and Kinetic Study of Pomegranate Peel, Prickly Pear Peel, and Their Mixture for Bioenergy Applications
Zając, Paulina	Unraveling the Pyrolytic Degradation Mechanisms and Recycling Potential of Non-Isocyanate Polyurethanes
Zayoud, Azd	Comprehensive Upgrading of Plastic-Derived Pyrolysis Oil to Improve the Quality of Steam Cracking Feedstock
Zbair, Mohamed	Physico-chemical properties of biochars from four different caribbean biomasses
Zhang, Feichi	Impact of Intra-Particle Heat Conduction on Waste Plastic Pyrolysis Simulation of plastic pyrolysis in a fluidized bed reactor under batch-wise and continuous feeding mode
Zhang, Huiyan	Biomass pyrolysis with Fe-Ni-CaO char-based catalyst for efficient green hydrogen generation and bio-oil upgrading via coupled C–H/O–H activation One-pot synthesis of hierarchical ZSM-5 for lifetime improvement in catalytic conversion of plastic waste
Zhang, Junwang	High-temperature pyrolysis of pine sawdust using metallurgical slag as oxygen carrier and gasification of solid residues Hydrogen transfer and reaction mechanism during gradient temperature pyrolysis of coal under steam atmosphere
Zhang, Linmin	In-situ release detection and mechanism of alkali metals during coal and biomass co-pyrolysis/gasification Evolution characteristics and mechanism of products from large-particle biomass pyrolysis in molten salt media The mechanism of biomass pyrolysis quality improvement catalyzed by calcium oxide-based catalysts
Zhang, Mengjuan	Oxidative torrefaction of biomass in a fluidized bed to produce biochar with high grindability
Zhang, Min	Deep insights into fluorine transformation mechanisms during pyrolysis of retired photovoltaic backsheets: Experimental validation and ReaxFF molecular dynamics simulations
Zhang, Qi	A Strategy for Tuning Pyrolysis and Release Profiles of Reconstituted Tobacco The Influence of Physical Parameters and Puffing Conditions on the Thermal Characteristics of Cigar Combustion Cones
Zhang, Qian	Insight into the pyrolysis behavior of tar-rich coal via infrared fast heating
Zhang, Weidong	Unlocking Lignite’s Value through Structure-Guided Alkaline Depolymerization and Electro-Oxidative Upgrading
Zhang, Xiangwen	Pressure-Dependent Pyrolysis of Cyclopropanated Fuel exo-TCN: Experiments and Kinetic Modeling
Zhang, Xiaolei	Model for Cellulose Pyrolysis Combining Kinetic Monte Carlo Simulation and Vapor-Liquid Equilibrium.
Zhang, Yue	Thermal-Analysis-Based Characterization of the Heating-Combustion Boundary in Biomass Systems The Influence of Physical Parameters and Puffing Conditions on the Thermal Characteristics of Cigar Combustion Cones
Zhang, Zewei	Characteristics and mechanism for ex-situ catalytic pyrolysis of oil-based drill cuttings (OBDC) using OBDC pyrolysis slag
Zhang, Zhenlei	Ex-situ catalytic pyrolysis of paper sludge to bio-BTX on a staged free-fall reactor using three commercial catalysts
Zhao, Xiaoyan	A comprehensively experimental and kinetic modeling investigation of C6 ketone isomers pyrolysis and oxidation: Insight into effects of isomerism
Zhao, Yuanyuan	Enhanced hydrocarbons generation of cyclic catalytic pyrolysis of acid-washed sweet sorghum stalk through Mo/HZSM-5
Zheng, Mo	framework for reaction mechanism investigation of pyrolysis process for carbon-based fuels with reactive molecular dynamics simulation Enabling a global view of reaction class in hydrocarbon pyrolysis with ReaxFF MD and machine learning Strategy for revealing thermolysis mechanism of CL-20 cocrystals by ReaxFF MD simulations
Zheng, Xin	In-situ detection of catalytic cracking of Naomaohu pyrolysis volatiles over Fe and Al components in red mud
Zhou, Jinlin	Enabling a global view of reaction class in hydrocarbon pyrolysis with ReaxFF MD and machine learning
Zhurinsh, Aivars	Optimizing Activated Carbon Properties: The Role of Precursor Source, Carbonization and Activation Parameters Study of liquid and solid product formation after hydrothermal processing of carbohydrate and aromatic biomass derivatives Py-GC/MS investigation of the formation of various anhydrosugars from carbohydrates for efficient green chemical synthesis
Zielke, Reiner	Influence of Wood Anisotropy on Pyrolysis Behavior: Experimental and Numerical Study
Zimbardi, Federica	THE POWER OF SILYLATION: TOWARD A MOLECULAR DESCRIPTION OF LIQUIDS FROM THERMOCHEMICAL PROCESSES Fermentability of water-soluble products from HTC-Py-AD processes: comparison of fast and intermediate pyrolysis Residual Energy Recovery from Digestate via Py-AD approach: Water-soluble fraction of Bio-oil as Feedstock and its Molecular Characterization by Silylation-GC-MS
Zirwes, Thorsten	Impact of Intra-Particle Heat Conduction on Waste Plastic Pyrolysis Simulation of plastic pyrolysis in a fluidized bed reactor under batch-wise and continuous feeding mode
Zou, Runyu	What are we breathing at home? - Household Micro- and Nanoplastics: Composition, Differences, potential Sources & Determinants
Zouari, Mariem	Analysis of Biocompounds Released in the Gaseous Effluent during Slow Pyrolysis of Hemp Effect of extraction pretreatments on composition and porosity of biochar from Quercus robur bark
Zsinka, Viktória	Value added products obtained from pilot scale waste pyrolysis and gasification for circular economy
Á
Ávila, Maria Inés	Pressure effect on catalytic pyrolysis of eucalyptus over hierarchical BETA zeolite
Ö
Öztürk, Di̇lara	Integrating Hydrothermal Carbonization and Pyrolysis for the Revalorization of Sewage Sludge Digestate: A Hybrid Thermochemical-Biological Perspective