PROGRAM
Days: Friday, September 6th Saturday, September 7th Sunday, September 8th Monday, September 9th Tuesday, September 10th
Friday, September 6th
View this program: with abstractssession overviewtalk overview
Saturday, September 7th
View this program: with abstractssession overviewtalk overview
10:00-11:00 Opening
Location: HALL 1
11:00-13:00 Session 1: Plenary Session
Chair:
Location: HALL 1
11:00 | Bulgarian Institute of Metrology - activities in the field of scientific metrology (abstract) |
11:30 | Measuring Instruments in the Digital Industry (abstract) |
12:00 | Type A Evaluation of Measurement Uncertainty: Frequentist or Bayesian? (abstract) |
14:00-15:30 Session 2: Section V Measurements in the Electrical Power Engineering
Chair:
Location: HALL 1
14:00 | Method of estimating of the amplitude spectrum measurement error caused by the ADC nonlinearity (abstract) |
14:15 | Hall effect closed loop current transducers (abstract) |
14:30 | Comparison of Approaches for Calibration of Electrical Power Quality Analyzers (abstract) |
14:45 | Verification of the Calculation Method on CLAMP-ON Resistance Testing and Mesurement (abstract) |
15:00 | Estimation of the Uncertainty of Measured Efficiency of Electrical Vehicle Charging Stations (abstract) |
16:00-18:00 Session 3A: Section VIII Metrology Practice
Chair:
Location: HALL 1
16:00 | EVALUATION OF METROLOGICAL CHARACTERISTICS OF VEGA UKS COLLIMATING STANDS (abstract) |
16:15 | Research of colorimetric characteristics of reference materials for reflection in various measurement geometries (abstract) |
16:30 | Traceability of the National vibration measurement standard via comparison with previous PTB calibration report (abstract) |
16:45 | Impact of the new definition of the kilogram on the BIM (DG NCM) work (abstract) |
17:00 | Metrology assurance of differential pressure transmitter with square root function (abstract) |
17:15 | Метрологично осигуряване на дозиметри-радиометри тип УИМ 2-2 (abstract) |
17:30 | REALIZATION OF THE RELATIVE HUMIDITY AND DEW POINT TEMPERATURES AT NATIONAL CENTER OF METROLOGY (NCM), BIM, BULGARIA (abstract) |
16:00-18:00 Session 3B: Section VI Acoustics Measurements, Vibration Measurements and Diagnostics
Chair:
Location: HALL 2
16:00 | Determinition of gain-frequency characteristic parameters of the accelerometers by the area method (abstract) |
16:15 | Broad band seismic sensors and their application: case study – Livingston Island, Antarctica (abstract) |
16:30 | Features of the application of the methodology for assessing the acoustic properties of the sound field for spectator rooms (abstract) |
16:45 | Brüel & Kjaer and Spectri Ltd. presenting vibration test systems (abstract) |
17:00 | DEVELOPMENT, NEWS AND PRODUCTS IN THE FIELD OF NOISE AND VIBRATIONS BY SPECTRI LTD (abstract) |
17:15 | SPECTRI – LAB NEW ACCREDITED LABORATORY FOR TESTING AND CALIBRATION OF CALIBRATORS, SOUND LEVEL METERS, MULTIFUNCTIONAL CALIBRATORS AND NOISE DOSIMETERS. METHODS OF APPLYING METHODOLOGIES, INTERNATIONAL STANDARDS. (abstract) |
17:30 | SPECTRI LTD. AND THE LEADERS IN THE FIELD OF ROTARY AND RECIPROCATING INDUSTRIAL MACHINES VIBRATIONS BRÜEL & KJAER VIBRO. INNOVATIVE PROJECT DELIVERY, CONDITION MONITORING SOLUTIONS, MACHINE DIAGNOSIS AND SERVICES. (abstract) |
Sunday, September 8th
View this program: with abstractssession overviewtalk overview
09:00-11:00 Session 4A: Section I General Aspects of Metrology. Measurement Methods. Unity and Accuracy of Measurements
Chair:
Location: HALL 1
09:00 | Comparative analysis of algorithm of processing measuring results for calibrating standard deadweight pressure gauges (abstract) |
09:15 | Comparative analysis of algorithms for evaluation of inconsistent data on the example of comparisons CCQM-K131 (abstract) |
09:30 | Measurement uncertainty evaluation at gauge block calibration (abstract) |
09:45 | Generalization of Studies in the Steady-state Value Interval Criterion for the Measuring Circuit with Structural Uncertainty (abstract) |
10:00 | The method of reducing the measurement error of the propagation delays in optical elements and optical fibers (abstract) |
10:15 | Matrix method of the estimation of uncertainties in multiparameter measurements of correlated quantities (abstract) |
10:30 | Research of measurement uncertainty during calibration of a bell micromanometer for the transfer of a pressure unit to a secondary air flow velocity standard (abstract) |
09:00-11:00 Session 4B: Section VII Measurements in the Ecology, Biotechnology, Medicine and Sport
Chair:
Location: HALL 2
09:00 | Some metrological aspects of measurements of quantitative characteristics during a hypoxic training of elite rowers (abstract) |
09:15 | Unstable Atherosclerotic Plaque Detection And Preliminary Classification of Its States With Transcutaneous Ultrasound Vibrodiagnostics (abstract) |
09:30 | Concept of Measurement And Information System for Computer Vibrodiagnostics of Atherosclerosis (abstract) |
09:45 | System approach in the analysis of complex objects (abstract) |
10:00 | Detection of Heavy Metal Ions by Newly Designed Biosensor with Well-Formed 3D Nano-Structure (abstract) |
10:15 | SCIENTIFIC SIMPOSIUM WITH INTERNATIONAL PARTICIPATION “METROLOGY AND METRTOLOGICAL SUPPLY” SOFTWARE SIMULATION SYSTEM FOR THE SOLUTION OF THE REVERSE PROBLEM OF VOLUME SCATTERING OF NATURAL GAS BUBBLES. ARCHITECTURE OPTIMIZATION SUBSYSTEM (abstract) |
10:30 | REFRACTION MEASUREMENTS AND MODELING OF THE CONTENT OF WATER WHEN ESTIMATING THE QUALITY OF MUSCULAR ANIMAL TISSUE (abstract) |
11:30-13:15 Session 5A: Section I CONTINUES
Chair:
Location: HALL 1
11:30 | Trend in efficient development of measuring instruments and systems (abstract) |
11:45 | Evaluation of standard uncertainties of measurement results obtained using an electronic colorimeter. (abstract) |
12:00 | A model of dynamic error within inertial impacts (abstract) |
12:15 | Metrology in support of accreditation (abstract) |
12:30 | DEVELOPMENT OF A METHOD AND SET OF TOOLS FOR METROLOGICAL ASSURANCE OF OPTICAL-ELECTRONIC MEASURING INSTRUMENTS (abstract) |
12:45 | UNCERTAINTY OF ESTIMATES OF DEVELATIONS OF THE FORM OF GEOMETRIC FEATURES (abstract) |
11:30-13:15 Session 5B: Section VII CONTINUES
Chair:
Location: HALL 2
11:30 | HOW TO MEASURE THE IMPACT OF FACTORS AFFECTING LIFE EXPECTANCY (abstract) |
11:45 | Improved graphical analysis of atrial fibrillation based on Holter measurement data (abstract) |
12:00 | Measurement in psychophysiology: analysis of current challenges and achievements by the example of EEG-studies of acute stress (abstract) |
12:15 | Key metrological issues of medical psychological diagnostics (abstract) |
12:30 | Expert assessment and expert judgments as a metrological problem in the field of non-physical quantities measurement (abstract) |
12:45 | On the issue of psychological diagnostic tests as psychometric models of aggression (abstract) |
13:00 | Measurements of non-physical quantities and data analysis in clinical and psychological practice: Metrological issues in the process of mathematical modelling of psychological phenomena (abstract) |
16:00-18:00 Session 6A: Section X Quality Management and Control, Standardization and Certification
Chair:
Location: HALL 1
16:00 | ASSESSMENT OF THE EFFECTIVENESS OF LASER-ACOUSTIC TRANSFORMATION (abstract) |
16:15 | FMEA (Potential failure mode and effects analysis) analysis in the manufacture of steel parts (sheet metal) by punching, deep drawing and bending (abstract) |
16:30 | Identification of the computer system state based on multidimensional discriminant analysis. (abstract) |
16:45 | Obfuscated Code Quality Measurement (abstract) |
17:00 | Exploring the need for FMEA analysis in the choice of the Photogrammetric method for control and measurement in heavy machinery. (abstract) |
17:15 | THE MANIFESTATION OF SYNERGY IN MANAGEMENT AND SOCIAL SCIENCES, AND METHODS FOR MEASURING IT (abstract) |
17:30 | Graphic Representation of Component Algorithms in Multimedia Devices (abstract) |
17:45 | Exploration of the advantages and an algorithm for the implementation of the digital twin concept (abstract) |
16:00-18:00 Session 6B: Section III Measurement and Information Systems and Technologies
Chair:
Location: HALL 2
16:00 | Improvement of metrological characteristics of the automated information-measuring and control system of oil products accounting in operating conditions of its operation (abstract) |
16:15 | Information-measuring system for measuring parameters of thermoelectric generator modules and batteries based on them (abstract) |
16:30 | HEAT LOSSES ESTIMATION OF BUILDINGS AND CONSTRUCTIONS BY THERMOGRAPHIC EXAMINATION (abstract) |
16:45 | Design of Intelligent Heating Technology System on FPGA Measuring Vision and Control (abstract) |
17:00 | FPGA Kalman Filter for Intelligent Heating Technology System (abstract) |
17:15 | Analysis of the state diagram correctness of automatic logic control systems on FPGA (abstract) |
17:30 | Measurement and analysis of cross-band satellite antenna parameters (abstract) |
17:45 | Development of a virtual system for generating and measuring real signals (abstract) |
Monday, September 9th
View this program: with abstractssession overviewtalk overview
09:00-11:30 Session 7A: Section II Sensors, Transducers and Devices for Measurement of Physical Quantities
Chair:
Location: HALL 1
09:00 | Probable compressive strength and modulus of elasticity of concrete, determined by Non-Destructive Ultrasonic Pulse Velocity Method (NDUPVM) in different ways of measuring transducers placement (abstract) |
09:15 | Tenso-resistive printed sensors for various deformation measurement (abstract) |
09:30 | MAGNETOTRANSISTOR SENSORS WITH DIFFERENT OPERATION MODES (abstract) |
09:45 | Novel Prony-based algorithm for estimating oscillation parameters of Coriolis flowmeter at two-phase flow (abstract) |
10:00 | Research of moisture-meter device for bulk and liquid materials. (abstract) |
10:15 | A New Laser Interferometric Oil Manometer with High Resolution (abstract) |
10:30 | Multi-sensor gas-sensing head for air quality evaluation (abstract) |
09:00-11:30 Session 7B: Section IV Measurements in the Industry
Chair:
Location: HALL 2
09:00 | Study and evaluation of Air-electronic gauges via Methodology MSA (abstract) |
09:15 | MATHEMATICAL MODEL OF DISPLACEMENTS IN TOOLS USED IN BORING OPERATIONS ON MACHINING CENTERS (abstract) |
09:30 | THE ROLE UNCERTAINTY OF MEASUREMENTS IN THE FORMATION OF ACCEPTANCE CRITERIA (abstract) |
09:45 | Measurement System for Engine Cylinder Roundness Assessment – accuracy analysis (abstract) |
10:00 | Deviation from form and orientation dual-channel laser measurement system (abstract) |
10:15 | MEASUREMENT OF THE CLOSING FORCE AT AUTOMATIC CLOSING BOTTLES WITH SCREW CAPS (abstract) |
10:30 | The problem of the formation of the normalized unbalance when carrying out accounting transactions of petroleum products (abstract) |
10:45 | Assessment of Accuracy and Precision of a Complex Polymer Component (abstract) |
Tuesday, September 10th
View this program: with abstractssession overviewtalk overview