ICASET 2023: INTERNATIONAL CONFERENCE ON AERONAUTICAL SCIENCES, ENGINEERING AND TECHNOLOGY 2023

A
Aafaq, Nayyer	Speech Enhancement of Real-Time Radio Communication Between Aircraft and Air Traffic Control Based on Spectral Subtraction and Deep Learning Deceiving Airborne Object Detectors Using Adversarial AI
Abbas, Syed Zahid	Target Search Through Decentralized and Co- Operative Surveillance of Multiple UAVs in an Uncertain Environment
Abdur Rehman Khan,	Performance Characterization of EEEC (Eolic Energy Unit) for Horizontal Axis Wind Turbine
Afzal, Aftab	Design and Analysis of a Small-Scale Solar Powered UAV Development of an autonomous unmanned aerial vehicle for rapid aircraft defect detection
Ahmad, Prof Faiz	Mechanical properties of GNPs toughened flax/epoxy composites for Aerospace applications
Ahmed, Muhammad R.	Trends and Challenges of Machine Learning-Based Predictive Maintenance in Aviation Industry
Akbari, Akbar Sheikh	Source Camera Identification Techniques: a Survey
Al Abri, Omar Khalifa	Design and Analysis of a Small-Scale Solar Powered UAV
Al Amri, Al Azhar	The effect of cutting parameters on hole quality in the aluminium alloy (Al 6082-T6)
Al Azzani, Meera	Precision Agriculture Through Unmanned Aerial Vehicles: a Case Study at Sultan Qaboos University
Al Farsi, Qusai	Comparative Study of Post-Processing Techniques for Enhancing the Corrosion Resistance, Microstructure, and Mechanical Properties of SLM-Produced 316L Stainless Steel
Al Hadidi, Hisham	Trends and Challenges of Machine Learning-Based Predictive Maintenance in Aviation Industry Comparative Study of Post-Processing Techniques for Enhancing the Corrosion Resistance, Microstructure, and Mechanical Properties of SLM-Produced 316L Stainless Steel
Al Maaini, Mohammed Othman	Design and Development of Advanced Pilot Helmet Visor by Using Electrochromic Technology
Al Maashri, Ahmed	Precision Agriculture Through Unmanned Aerial Vehicles: a Case Study at Sultan Qaboos University
Al Majarfi, Younis Nasser	Design of a UAV Solar System
Al Majizi, Alkhalil Ahmed	Proposal for Foreign Object Damage (FOD) Detection and Elimination Technique
Al Mamari, Nasser	Design and Development of Advanced Pilot Helmet Visor by Using Electrochromic Technology
Al Nuaimi, Maryam	Precision Agriculture Through Unmanned Aerial Vehicles: a Case Study at Sultan Qaboos University
Al Rahbi, Khalid Hamood	Extraction of Additional Energy Through Heat Harvesting from the Solar Panel
Al Saadi, Fahad	Combatting Biofuel Toxicity Through Membrane Separation: Improving the Production of Sustainable Aviation Fuels
Al Siyabi, Dr Mohamed	Tba
Al Zeidi, Salim	Automatic Vehicle Detection and Identification
Al-Abri, Omar	Numerical Investigation on the Effect of Adding a Gurney Flap with Multiple Heights on the Aerodynamic Performance of Various Cambered Airfoils
Al-Amri, Nasser	The Effective Utilization of Aernuatical Training Aids
Al-Dhahli, Hamed	Analysing the Aerodynamic Performance of a Gurney Flap on a Multi-Element Aerofoil
Al-Maaini, Raqiya Khalid Mohammed	Machine Learning Algorithm Based Condition Monitoring of electrical Components of Solar PV Plant with Ultraviolet Image Processing Observed Through Unmanned Aerial Vehicle
Al-Zaabi, Fatma Hassan Khamis	Machine Learning Algorithm Based Condition Monitoring of electrical Components of Solar PV Plant with Ultraviolet Image Processing Observed Through Unmanned Aerial Vehicle
Albahrani, Ibrahim	Development of an autonomous unmanned aerial vehicle for rapid aircraft defect detection
Aldhafari, Luqman Sulaiman	Development of an autonomous unmanned aerial vehicle for rapid aircraft defect detection
Alghafri, Omar Khadib	Biological Water Treatment Using Ultraviolet (UV) Light
Alhajri, Aflah	Experimental Study of Radio Frequency Drone Jamming
Ali, Prof Rashid	Engaging and Motivating Students through the Use of Problem-based Learning
Ali, Sarwat	Machine Learning Models for Performance of Students in Foundation in University in Oman
Ali, Zahid	Speech Enhancement of Real-Time Radio Communication Between Aircraft and Air Traffic Control Based on Spectral Subtraction and Deep Learning
Almanai, Ahmed	Development of an autonomous unmanned aerial vehicle for rapid aircraft defect detection
Alrisi, Alreem Majid Ali Alrisi	Machine Learning Algorithm Based Condition Monitoring of electrical Components of Solar PV Plant with Ultraviolet Image Processing Observed Through Unmanned Aerial Vehicle
Alshuk, Ibrahim Alsukaili	Biological Water Treatment Using Ultraviolet (UV) Light Analysis of PET Film Flow During Plastic Manufacturing Process
Alwashahi, Azza Marwan Salim	Machine Learning Algorithm Based Condition Monitoring of electrical Components of Solar PV Plant with Ultraviolet Image Processing Observed Through Unmanned Aerial Vehicle
Anilir, Berkan	Design and Analysis of a Small-Scale Solar Powered UAV
Ansari, Rana Tarannum	Machine Learning Models for Performance of Students in Foundation in University in Oman
Arıkan, Kutluk Bilge	A Bio-inspired Control Approach for 3D Flapping-Flight
B
Babaa, Saleh Elkelani	Improving Indoor Air Quality (IAQ) with Reduced Energy Cost in the Aeronautical Facilities
Baroomi, Badar Al	Trends and Challenges of Machine Learning-Based Predictive Maintenance in Aviation Industry
Basit, Abdul	Performance Characterization of EEEC (Eolic Energy Unit) for Horizontal Axis Wind Turbine
Batool, Ghazala	Target Search Through Decentralized and Co- Operative Surveillance of Multiple UAVs in an Uncertain Environment
Bhatia, Dinesh	Preliminary Design of an UAV Based System for Wildlife Monitoring and Conservation
Butt, Saher	Simulated Implementation of L-Band Digital Aeronautical Communication System (LDACS) Based Communication Navigation and Surveillance Network for Pakistani Airspace
C
Coyle, Prof Eugene	Big Challenges Facing the Aviation Industry in Reducing Fuel Emissions - Path to Net Zero?
D
Dattana, Vishal	Predicting aviation safety human factors using artificial intelligence and machine learning classification
Dawood, Aamir	On the Possible Utilization of an End-Effector Mechanism for Space Debris Remediation in Low Earth Orbit
Dhillon, Akash Singh	Preliminary Design of an UAV Based System for Wildlife Monitoring and Conservation
E
Elmahdi, Mohamed	Fault-Tolerant Systems Based on Distributed IMA Technology
G
Garza, Carlos	Finite Element Modeling of Shape Memory Actuator for Application in a Morphing Wing Airfoil Segment of Unmanned Aerial Vehicle
Gorbenko, Antoliya	Source Camera Identification Techniques: a Survey
H
Hamza, Muhammad Ameer	Deceiving Airborne Object Detectors Using Adversarial AI
Heggy, Dr. Essam	How Mapping Water on Planets Helps Resolve Middle East’ Climate Questions
Hesse, Henrik	Preliminary Design of an UAV Based System for Wildlife Monitoring and Conservation
Hoblos, Jazzar	Presentation of an Innovative Method Based on Ultrasonic Waves Propagation: Monitoring of Bolt Tightening Efforts on Nuclear Equipment
Hossain, Mohammad Sayeed	Biological Water Treatment Using Ultraviolet (UV) Light Analysis of PET Film Flow During Plastic Manufacturing Process
Hossain, Mohammed Sayeed	Development of an autonomous unmanned aerial vehicle for rapid aircraft defect detection
Hussain, Tariq	Proposal for Foreign Object Damage (FOD) Detection and Elimination Technique
I
Iqbal, Ali	Speech Enhancement of Real-Time Radio Communication Between Aircraft and Air Traffic Control Based on Spectral Subtraction and Deep Learning
Islam, Prof Syed Junaid	Antennas and the Future of Wireless Transmission Networks
K
K, Abhiroop	Effect of anti-Fouling Coatings and Biofouling on Ship Hydrodynamic Performance
Kazmi, Syed M Kazam Abbas	Deceiving Airborne Object Detectors Using Adversarial AI
Khamis Al Dhafari, Luqman Sulaiman	Design of a UAV Solar System Design and Analysis of Long Endurance Solar Powered UAV
Khan, Abid Ali	Design and Analysis of a Small-Scale Solar Powered UAV Design and Analysis of Long Endurance Solar Powered UAV Improving Indoor Air Quality (IAQ) with Reduced Energy Cost in the Aeronautical Facilities Extraction of Additional Energy Through Heat Harvesting from the Solar Panel Proposal for Foreign Object Damage (FOD) Detection and Elimination Technique
Khan, Abid Ali	Analysis of PET Film Flow During Plastic Manufacturing Process
Khan, Engr. Shahid Ali	Improving Indoor Air Quality (IAQ) with Reduced Energy Cost in the Aeronautical Facilities
Khan, Gul Afroz Ifra	Modeling and Simulation of Interference Between Aircraft Radar Altimeter & 5G-C Band Transmissions Along with Implementation of Proposed Solution
Khan, Mansoor Ahmed	Deceiving Airborne Object Detectors Using Adversarial AI
Khan, Wajih Ahmed	On the Possible Utilization of an End-Effector Mechanism for Space Debris Remediation in Low Earth Orbit
Knight, Jason	CFD Modelling of Ionic Propulsion, the Electric Jet Engine
Krishna Boddu, Murali	Machine Learning Algorithm Based Condition Monitoring of electrical Components of Solar PV Plant with Ultraviolet Image Processing Observed Through Unmanned Aerial Vehicle
Kumar, Sachin	A Hybrid Physics and Machine Learning Based Approach for Guided Wave Based Detection of Delaminations in FRP Composites
Kurtulus, Prof Dilek Funda	Future of Unmanned Power Aerial Vehicles
Kurtulus, Prof Dilek Funda	Design and Analysis of a Small-Scale Solar Powered UAV
Kurtuluş, Dilek Funda	A Bio-inspired Control Approach for 3D Flapping-Flight
L
Liaquat, Sidra	Simulated Implementation of L-Band Digital Aeronautical Communication System (LDACS) Based Communication Navigation and Surveillance Network for Pakistani Airspace
López, Luis	Finite Element Modeling of Shape Memory Actuator for Application in a Morphing Wing Airfoil Segment of Unmanned Aerial Vehicle
M
Mahmud, Syed Khurram	Deceiving Airborne Object Detectors Using Adversarial AI
Majid, Irfan	Simulated Implementation of L-Band Digital Aeronautical Communication System (LDACS) Based Communication Navigation and Surveillance Network for Pakistani Airspace
Majid, Irfan	Modeling and Simulation of Interference Between Aircraft Radar Altimeter & 5G-C Band Transmissions Along with Implementation of Proposed Solution
Majid, Muhammad	Speech Enhancement of Real-Time Radio Communication Between Aircraft and Air Traffic Control Based on Spectral Subtraction and Deep Learning
Mehdi, Aqib	Target Search Through Decentralized and Co- Operative Surveillance of Multiple UAVs in an Uncertain Environment
Miah, Md Salim	Biological Water Treatment Using Ultraviolet (UV) Light Analysis of PET Film Flow During Plastic Manufacturing Process
Mishra, Vaibhav	A Hybrid Physics and Machine Learning Based Approach for Guided Wave Based Detection of Delaminations in FRP Composites
Mohammed, Dr. Shameem Basheer	Effect of anti-Fouling Coatings and Biofouling on Ship Hydrodynamic Performance
Mporas, Iosif	Source Camera Identification Techniques: a Survey
Murugesan, Dr Selvarani	Experimental Study of Radio Frequency Drone Jamming Extraction of Additional Energy Through Heat Harvesting from the Solar Panel Automatic Vehicle Detection and Identification
Myo, Thirein	Trends and Challenges of Machine Learning-Based Predictive Maintenance in Aviation Industry Comparative Study of Post-Processing Techniques for Enhancing the Corrosion Resistance, Microstructure, and Mechanical Properties of SLM-Produced 316L Stainless Steel
N
Naqvi, Dr. Messam Abbass	Collaborative Engineering and Digital Twins
Nelson, Mark	Combatting Biofuel Toxicity Through Membrane Separation: Improving the Production of Sustainable Aviation Fuels
Nwokeji, Chijioke Emeka	Source Camera Identification Techniques: a Survey
O
Osama Ali Ahmed Awan,	Performance Characterization of EEEC (Eolic Energy Unit) for Horizontal Axis Wind Turbine
P
Pandey, Jitendra	Predicting aviation safety human factors using artificial intelligence and machine learning classification
Pandey, Namita	Assessment of Impact of Fatigue, Stress, and Workload on Human Performance in Aviation Industry
Petit, Aurelien	Presentation of an Innovative Method Based on Ultrasonic Waves Propagation: Monitoring of Bolt Tightening Efforts on Nuclear Equipment
R
Reducindo, Diego	Finite Element Modeling of Shape Memory Actuator for Application in a Morphing Wing Airfoil Segment of Unmanned Aerial Vehicle
Reyes, Luis	Finite Element Modeling of Shape Memory Actuator for Application in a Morphing Wing Airfoil Segment of Unmanned Aerial Vehicle
Round, Peter	Tba
S
Saleem, Ashraf	Precision Agriculture Through Unmanned Aerial Vehicles: a Case Study at Sultan Qaboos University
Sarosh, Ali	On the Possible Utilization of an End-Effector Mechanism for Space Debris Remediation in Low Earth Orbit Orbital Strategies of Space-TUG for Space Debris Remediation in Low Earth Orbit Performance Characterization of EEEC (Eolic Energy Unit) for Horizontal Axis Wind Turbine
Shadoul, Inas	Precision Agriculture Through Unmanned Aerial Vehicles: a Case Study at Sultan Qaboos University
Shuaib, Hassan	Performance Characterization of EEEC (Eolic Energy Unit) for Horizontal Axis Wind Turbine
Sunny, Mohammed Rabius	A Hybrid Physics and Machine Learning Based Approach for Guided Wave Based Detection of Delaminations in FRP Composites
T
Talha, Muhammad	On the Possible Utilization of an End-Effector Mechanism for Space Debris Remediation in Low Earth Orbit
U
Udupi, Prakash Kumar	Predicting aviation safety human factors using artificial intelligence and machine learning classification
V
Venugopal, Dhanalakshmi	Predicting aviation safety human factors using artificial intelligence and machine learning classification
Virk, Prof Muhammad Shakeel	In-Cloud Icing Effects on Aircraft/UAV Aerodynamics and Flight Operations
Z
Zafar, Dr. Suhaib	Case Studies: AI & ML — Acoustic Emission Testing (AET)
Zafar, Mahmood Faisal	Safety Management - Human Factor
Ç
Çalış, Özgün	A Bio-inspired Control Approach for 3D Flapping-Flight

Disclaimer | Powered by EasyChair Smart Program