PROGRAM
Days: Monday, October 4th Tuesday, October 5th Wednesday, October 6th Thursday, October 7th Friday, October 8th
Monday, October 4th
View this program: with abstractssession overviewtalk overview
10:00-10:10 Session 1: Opening
Opening Remark
Chairs:
Location: Zoom Main Room
10:00 | General Chair Greeting |
10:05 | ISJ Executive Committee General Chair Greeting |
10:10-11:00 Session 2: ICAI-Print4Fab Joint Keynote
Opening Keynote "The Imaging Eco-system"
Chairs:
Location: Zoom Main Room
10:10 | Development of a Film Cleaning System That Enables Film Reuse and Recycling (abstract) |
11:10-12:25 Session 3: Interactive: Short Presentation
Location: Zoom Main Room
11:10 | Unidirectional Window Decals Using Resin Printing Ink for Making Dye-Doped Layer Which Enables to Make Invisible from Back Side (abstract) |
11:13 | Unidirectional Window Decals Using Intaglio Resin Printings for Making Micro Optical Prisms Which Enable to Make Invisible from Back Side (abstract) |
11:16 | Micropillar Surfaces for Generation of Three-Dimensional Skin Models in vitro (abstract) |
11:19 | Electro-Optic Properties of Liquid Crystal Devices by Doping with Supramolecule-Stabilized Nanocolloids (abstract) |
11:22 | Ejection Volume of Highly Viscous Jets (abstract) |
11:25 | High Luminance Bottom-Emission Type Powder EL Device with High Transparent Substrate (abstract) |
11:28 | Improvement in Electrochromic Stability of Conductive Polymers with Nano-Structured Electrode (abstract) |
11:31 | Preparation of Metallic Glossy Films Using 3-Alkoxythiophenes (abstract) |
11:34 | Triboelectrification Behavior of Polyester Films Doped with Titanium Oxides (abstract) |
11:37 | Organic Floating-Gate Memory for Image Sensing (abstract) |
11:40 | Ultrafast Blue Electrochemiluminescence Based on Photon-Upconversion Using DNA/Ru(Ⅱ) Complex Film (abstract) |
11:43 | Electroluminescence of Y2O3:Eu3+ Thin Film Prepared by Rapid Thermal Annealing Based on Solution Process (abstract) |
11:46 | Blue-Green Tunable Electroluminescent Device of Y2SiO5 Phosphor Activated by Tb3+ Ions (abstract) |
11:49 | Photophysical Properties of Luminescent Leuco Dye Introduced into Mesoporous Silica (abstract) |
11:52 | Investigation of Radiation Efficiency of Antenna Using Transparent Conductive Thin Film (abstract) |
11:55 | Development of Polycaprolactone Grafted with Maleic Anhydride (abstract) |
11:58 | Polypyrrole-ITO Conducting Inks on Flexible Substrates (abstract) |
12:01 | Visualization of Atrial Flutter Utilizing Attractor Reconstruction for Electrocardiogram (abstract) |
12:04 | Visible and Invisible QR Code on Metal for the New Type of Anti-Counterfeiting by Anodic Oxidation Method (abstract) |
12:07 | Development of Face Shield Utilizing Visualization Technology (abstract) |
12:10 | Design and Development of Coffee Carrier with AR AS Added Value Innovation (abstract) |
12:13 | Analysing the Development of the Malaysian Printing Industry: A CAN Perspective (abstract) |
12:16 | Design and Packaging Development for Skincare Lotions (abstract) |
12:19 | Transparent, Flexible and Conductive Carbon Nanotube Films: Application to Foldable Touch Panel (abstract) |
12:22 | The Invention of Robotic in Education Module Box (abstract) |
13:30-14:30 Session 4: Interactive: Poster Exhibition Group 1
Location: Zoom Breakout Room
Unidirectional Window Decals Using Resin Printing Ink for Making Dye-Doped Layer Which Enables to Make Invisible from Back Side (abstract) |
Unidirectional Window Decals Using Intaglio Resin Printings for Making Micro Optical Prisms Which Enable to Make Invisible from Back Side (abstract) |
Micropillar Surfaces for Generation of Three-Dimensional Skin Models in vitro (abstract) |
Electro-Optic Properties of Liquid Crystal Devices by Doping with Supramolecule-Stabilized Nanocolloids (abstract) |
Ejection Volume of Highly Viscous Jets (abstract) |
High Luminance Bottom-Emission Type Powder EL Device with High Transparent Substrate (abstract) |
Improvement in Electrochromic Stability of Conductive Polymers with Nano-Structured Electrode (abstract) |
Preparation of Metallic Glossy Films Using 3-Alkoxythiophenes (abstract) |
Triboelectrification Behavior of Polyester Films Doped with Titanium Oxides (abstract) |
14:40-15:40 Session 5: Interactive: Poster Exhibition Group 2
Location: Zoom Breakout Room
Organic Floating-Gate Memory for Image Sensing (abstract) |
Ultrafast Blue Electrochemiluminescence Based on Photon-Upconversion Using DNA/Ru(Ⅱ) Complex Film (abstract) |
Electroluminescence of Y2O3:Eu3+ Thin Film Prepared by Rapid Thermal Annealing Based on Solution Process (abstract) |
Blue-Green Tunable Electroluminescent Device of Y2SiO5 Phosphor Activated by Tb3+ Ions (abstract) |
Photophysical Properties of Luminescent Leuco Dye Introduced into Mesoporous Silica (abstract) |
Investigation of Radiation Efficiency of Antenna Using Transparent Conductive Thin Film (abstract) |
Development of Polycaprolactone Grafted with Maleic Anhydride (abstract) |
Polypyrrole-ITO Conducting Inks on Flexible Substrates (abstract) |
15:50-16:50 Session 6: Interactive: Poster Exhibition Group 3
Location: Zoom Breakout Room
Visualization of Atrial Flutter Utilizing Attractor Reconstruction for Electrocardiogram (abstract) |
Visible and Invisible QR Code on Metal for the New Type of Anti-Counterfeiting by Anodic Oxidation Method (abstract) |
Development of Face Shield Utilizing Visualization Technology (abstract) |
Design and Development of Coffee Carrier with AR AS Added Value Innovation (abstract) |
Analysing the Development of the Malaysian Printing Industry: A CAN Perspective (abstract) |
Design and Packaging Development for Skincare Lotions (abstract) |
Transparent, Flexible and Conductive Carbon Nanotube Films: Application to Foldable Touch Panel (abstract) |
The Invention of Robotic in Education Module Box (abstract) |
Tuesday, October 5th
View this program: with abstractssession overviewtalk overview
10:00-11:20 Session 8A: ISJ‐Print4Fab Joint: Inkjet Analysis
Chairs:
Location: Zoom Main Room
10:00 | Analysis of Evaporation Behavior of Multi-Component Liquid Film in Forced Convection Field (abstract) |
10:20 | A Numerical Investigation for Droplet Behavior in Inkjet System Related to Print Quality (abstract) |
10:40 | Prediction of Jetting Stability of Pigment Dispersions by Zeta Potential Distribution Measurement (abstract) |
11:00 | Effect of Surrounding Droplets on Evaporation Rate of Pico-Liter Droplet on Substrate (abstract) |
11:40-12:10 Session 9: Presentation of 2019 ISJ Editor-in-Chief Award
Chairs:
Location: Zoom Main Room
11:40 | Applicability of Laser Drying System to Production Inkjet Printing System and Its Problems [Invited] (abstract) |
13:10-14:30 Session 10: ISJ‐Print4Fab Joint: Inkjet Head/Ink
Chairs:
Location: Zoom Main Room
13:10 | Development of Water-based Ink for High-Speed Cutsheet Inkjet (abstract) |
13:30 | Technologies in High Quality Inkjet Components “Samba JPC” (abstract) |
13:50 | Painting Technology for Highly Viscous Liquid Using Impact (abstract) |
14:10 | Micro-Patterning Based on Optical Vortex Laser Induced Forward Transfer (abstract) |
14:50-16:10 Session 11: ISJ‐Print4Fab Joint: Print4Fab Inkjet
Guest Presentation from Print4Fab2021
Chairs:
Location: Zoom Main Room
14:50 | Meniscus Inversion Mechanism and Its Impact on the Droplet Formation of an Inkjet Printhead (abstract) |
15:10 | Simulation of Inkjet Printing Using Fluid Structural Interaction (FSI) (abstract) |
Wednesday, October 6th
View this program: with abstractssession overviewtalk overview
10:00-11:20 Session 12A: ISJ: Device
Chairs:
Location: Zoom Main Room
10:00 | Improvement of Performance of Volumetric 3D Display using a Rotating Spiral Screen (abstract) |
10:20 | Decorative and Conductive Lines Printing with On-Demand Melt Thermal Transfer Printer (abstract) |
10:40 | Vivid Color Switching in the Electrochromic System Based on Reversible Deposition and Dissolution of Silver toward Color Reflective Display (abstract) |
11:00 | Study of Automatic Holographic Optical Element Array Creation System (abstract) |
13:00-13:30 Session 13: Presentation of 2018 ISJ Research Award by Konica Minolta Science and Technology Foundation
Chairs:
Location: Zoom Main Room
13:00 | A Development of Legibility Evaluation Method for Fonts Based on Image Processing and Development of Universal Design Fonts and Other Applications [Invited] (abstract) |
13:30-14:00 Session 14: Presentation of 2019 ISJ Research Award by Konica Minolta Science and Technology Foundation
Chairs:
Location: Zoom Main Room
13:30 | Influence of The Paper Lint on the Frictional Property of Rubber Rollers [Invited] (abstract) |
14:20-15:40 Session 15: ISJ: Electrophotography
Chairs:
Location: Zoom Main Room
14:20 | Consideration of the Counter Charge Traveling Distance on the Charge Transport Equilibrium Mechanism with a Dynamic Procedure (abstract) |
14:40 | Study on Internal Stress Vibration and Edge Wear of a Cleaning Blade (abstract) |
15:00 | Visualization Analysis of “Starvation” Defect at Edge of Halftone Image in Development Process of Electrophotography (abstract) |
15:20 | Analysis of Development Characteristics in Electrophotography Process (abstract) |
16:00-16:40 Session 16: ISJ: Image Processing
Chairs:
Location: Zoom Main Room
16:00 | Beef Grade Evaluation by Fractal Analysis of Beef Marbling (abstract) |
16:20 | Differences in Unified Material Appearance of Real Objects (abstract) |
Thursday, October 7th
View this program: with abstractssession overviewtalk overview
09:00-10:20 Session 17: SPIJ: Input and Output of Images
Chair:
Location: Zoom Main Room
09:00 | Fast Speed Fabrication of Patterned Organic Semiconductor Thin Films by Blade Coating Using Liquid Crystallinity and Their Transistor Characteristics (abstract) |
09:20 | Renewal of the Camera Resolution Measurement Software “HYRes” (abstract) |
09:40 | Study of the Correction and Effect of the Spectrum of the Light Source on the Data Acquired by the UAV Multispectral Camera (abstract) |
10:00 | Trends and Future in the Camera Industry and Its Technologies (abstract) |
10:40-12:00 Session 19: SPIJ: Radiation Track Imaging
Chair:
Location: Zoom Main Room
10:40 | Three-Dimensional Density Structure Imaging of the Izu-Omuroyama Volcano by Multi-Directional Muography (abstract) |
11:00 | Measurement of Neutrino Charged-Current Interactions on Iron Using a Nuclear Emulsion Detector in the NINJA Experiment (abstract) |
11:20 | Current Status and Future Plan of NINJA Experiment at J-PARC (abstract) |
11:40 | Temperature and Ion-Velocity Dependence of Crystal Sensitivity of Ultra-Fine-Crystal Nuclear-Emulsion Plate (abstract) |
13:05-14:05 Session 21: ASPT: Printing Technologies
Chairs:
Location: Zoom Main Room
13:05 | Digital Workflow Output Test in Commercial Printing [Invited] (abstract) |
13:35 | Study the TiO2 Thin Film Characteristics for Dye Sensitized Solar Cell by LDM 3D Printing System [Invited] (abstract) |
14:15-15:05 Session 22: ASPT: Printing Materials
Chairs:
Location: Zoom Main Room
14:15 | Copper Oxide (CuO) Fine Line Fabrication by Printing Method and Green Laser Sintering to form Cu Conductive line (abstract) |
14:35 | Two-Dimensional Single-Crystalline Copper Nanosheets as a Conductive Filler for Electronic Ink Applications [Invited] (abstract) |
15:15-16:45 Session 23: ASPT: Color
Chairs:
Location: Zoom Main Room
15:15 | Color Appearance of Lighting [Invited] (abstract) |
15:45 | Guidelines for Viewing Conditions of Printed Matter Using LED Lightings for Color Evaluation [Invited] (abstract) |
16:15 | Color and Material Appearance of Object Surface Influenced by Lighting Environment [Invited] (abstract) |
Friday, October 8th
View this program: with abstractssession overviewtalk overview
09:00-11:10 Session 24: ITE: 8K Technology and Applications
Chair:
Location: Zoom Main Room
09:00 | 8K Super Hi-Vision Technology and Its Medical Application [Invited] (abstract) |
09:50 | Development of 8K 3CMOS Sensor Camera System for Broadcast [Invited] (abstract) |
10:40 | Introduction of 8K UHDTV Test Sequences Produced by ITE and ARIB [Invited] (abstract) |
13:00-13:50 Session 26: ICAI-Print4Fab Joint Keynote
Closing Keynote
Chair:
Location: Zoom Main Room
13:00 | The Status and Trends of ASEAN Printing Industry and Its Challenges (abstract) |
14:00-15:30 Session 27: ISJ: Evolution of Imaging Eco-system in the New Normal Era
Chairs:
Location: Zoom Main Room
14:00 | How Does Telework Affect Paper Output? [Invited] (abstract) |
14:30 | Society Changes 3D Printer, or 3D Printer Changes Society? - The Exploration and Practice of the Nature of Digital is Asked Now - [Invited] (abstract) |
15:00 | Containers and Packaging in Post-COVID-19 Era and Eco-Printing Solution [Invited] (abstract) |