CAOS 2026: THE 26TH ANNUAL MEETING OF THE INTERNATIONAL SOCIETY FOR COMPUTER ASSISTED ORTHOPAEDIC SURGERY

A
A. Koster, Lennard	FURTHER POSTERIOR DWELLING OF THE FEMORAL COMPONENT ON AN MC COMPARED TO A CR BEARING. A FLUOROSCOPIC KINEMATIC ANALYSIS FROM A RANDOMISED CONTROLLED TRIAL
Abe, Koki	Accuracy of Dual Mobility Cement Cup Placement Using Augmented Reality Navigation in Hip Arthroplasty for Complex Acetabular Reconstruction Surgery
Abe, Syoya	TOTAL HIP ARTHROPLASTY FOR ANKYLOSED HIP USING A THREE-DIMENSIONAL PRINTED MODEL AND CT-BASED NAVIGATION: A CASE REPORT Symptom Duration–Related Muscle Atrophy And Fatty Degeneration Around The Hip Joint In Unilateral Hip Osteoarthritis: An AI-Based Imaging Study
Abe, Yuichiro	Construction of an Online Surgical Training System Using Omnidirectional Video Streaming
Adachi, Nobuo	Comparative analysis of intraoperative kinematics among different total knee arthroplasty designs: Can we restore medial pivot and eliminate anterior paradoxical motion? POSTOPERATIVE SPORT-INCLUSIVE ACTIVITY AFTER COMPUTER-ASSISTED TOTAL HIP ARTHROPLASTY: ASSOCIATION WITH CUP PLACEMENT ACCURACY AND CENTER OF ROTATION REPRODUCIBILITY Influence of Three-Dimensional Hip Parameters Change on Lower Limb Kinematics and Kinetics During Gait Following Total Hip Arthroplasty Femoral Stem Alignment and Post-operative Patient Satisfaction in Total Hip Arthroplasty Using Computer-Assisted Equipment
Aftabi, Hamidreza	Predicted Bone Union Propensity in Mini-Plate-Based Mandibular Reconstruction Surgery is Affected by Bone Cut Geometry
Aguilar Vidal, Théo	Statistical Pose Model Accurately Reproduces Forearm Pronation-Supination: Cadaveric Validation
Aiba, Hisaki	Treatment for malignant bone tumor with patient’ specific cutting guide
Alavi, Seyed Hamidreza	Automated Conversion of 3D Bone Meshes to NURBS for Patient-Specific Implant Design
Allais, Roman	Automatic Bones Segmentation for Total Ankle Arthroplasties Planning and Navigation
Ando, Wataru	TOTAL HIP ARTHROPLASTY FOR ANKYLOSED HIP USING A THREE-DIMENSIONAL PRINTED MODEL AND CT-BASED NAVIGATION: A CASE REPORT Symptom Duration–Related Muscle Atrophy And Fatty Degeneration Around The Hip Joint In Unilateral Hip Osteoarthritis: An AI-Based Imaging Study RETROSPECTIVE CT EVALUATION OF PELVIC REFERENCE PINS IN ROBOTIC-ASSISTED AND NAVIGATION-ASSISTED TOTAL HIP ARTHROPLASTY
Angibaud, Laurent	Impact of Demographic, Implant, and Intraoperative Planning Parameters on 2-Year Outcomes in Navigation-Assisted Tibia-First Total Knee Arthroplasty: A Descriptive Study IMPACT OF DYNAMIC ALIGNMENT CLUSTER PRESERVATION ON EARLY CLINICAL OUTCOMES IN NAVIGATED TOTAL KNEE ARTHROPLASTY UNDER CONTROLLED LOAD Learning Curve for rTSA Navigation Procedure With a Single System - A Large Scale Study Intraoperative Accuracy of Computer-Assisted Navigation for Treatment of Glenoids with Augmented Glenoid Components in Total Shoulder Arthroplasty IMPACT OF INSTRUMENTED GAP-BALANCING TECHNIQUE ON FUNCTIONAL ALIGNMENT TOTAL KNEE ARTHROPLASTY IN SEVERE VARUS DEFORMITY UNSUPERVISED MACHINE LEARNING DRIVEN DYNAMIC ALIGNMENT CLASSIFICATION UNDER CONTROLLED LOAD IN NAVIGATED TOTAL KNEE ARTHROPLASTY IMPACT OF THE SURGICAL WORKFLOW AND TECHNOLOGY CHANGE ON EARLY CLINICAL OUTCOMES IN TOTAL KNEE ARTHROPLASTY
Asano, Tomoki	Comparison of lower limb muscle characteristics, femoral morphology, and bone mineral density between femoral neck and intertrochanteric fractures using AI-based CT analysis
Asano, Tomoki	Variation and agreement rate in preoperative three-dimensional planning for total hip arthroplasty across hip surgeons Clinical and radiographic outcomes of rotational acetabular osteotomy using CT-based navigation for developmental dysplasia of the hip Side-to-side differences in femoral neck bone mineral density in patients undergoing surgery for adult spinal deformity Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index
Asseln, Malte	3D Geometric Articular Surface Analysis of the Wrist for Implant Design Automated Conversion of 3D Bone Meshes to NURBS for Patient-Specific Implant Design An automated Statistical Shape Model workflow of the Craniomaxillofacial Complex for Shape Reconstruction
Assink, Nick	Correction Osteotomies with 3D Guides: Does Surgical Experience Affect Operative Accuracy? Biomechanical and Computational Validation of PatientSpecific Implants for Schatzker IV Tibial Plateau Fractures Patient-Specific Implants for Femoral and Tibial Shaft Reconstruction: A Systematic Review and Classification Framework
Athwal, George	Population Specific Optimization of Glenosphere Size in Reverse Shoulder Arthroplasty Based on Sex and Height: A Japanese Statistical Shape Model Based Computational Simulation Study What Is the Optimal Graft and Transfer Location in Lower Trapezius Tendon Transfer for Posterosuperior Massive Rotator Cuff Tears? A Cadaveric Biomechanical Study Optimization of Patient Specific Glenosphere Positioning in Reverse Shoulder Arthroplasty Based on Rotator Cuff Conditions: A Cadaveric Biomechanical Simulation Study
Azumi, Takenori	Comparison of Implant Positioning Accuracy Between Mako and ROSA Robotic-Assisted Total Knee Arthroplasty Using Three-Dimensional CT Analysis
B
B. Simonsen, Morten	FURTHER POSTERIOR DWELLING OF THE FEMORAL COMPONENT ON AN MC COMPARED TO A CR BEARING. A FLUOROSCOPIC KINEMATIC ANALYSIS FROM A RANDOMISED CONTROLLED TRIAL
Baek, Hyun Jae	MID-FLEXION LAXITY COULD BE IDENTIFIED WITH CONTINUOUS FLEXION-ARC GAP ASSESSMENT IN PATIENTS WITH A LARGE PREOPERATIVE CONVERGENCE ANGLE.
Bang, Hyunhee	Design and Evaluation of a Wireless Robotic System for Long-Bone Fracture Reduction
Beitone, Clément	Automatic Quality Assessment and Uncertainty Localization on AI-generated digital twins of the shoulder
Beltman, Hugo	An automated Statistical Shape Model workflow of the Craniomaxillofacial Complex for Shape Reconstruction
Benady, Amit	Patient-Specific Ti-6Al-4V Lattice Implants for Critical-Sized, Weight-Bearing Limb Reconstruction: Average 45-months Surgical, Oncological and Functional Follow-up
Berger, Luisa	Literature review as a basis for psoas syndrome risk management in THA Analysis of safe zones for anterior overhang and cup coverage
Berhouet, Julien	Intraoperative HMD-Guided Glenoid Pin Placement in Shoulder Arthroplasty: Accuracy, Safe Zone and technical considerations Accuracy and Agreement Between Optical Navigation (NDI Polaris) and Postoperative CT for Glenoid Pin Placement: A Cadaveric Validation Study Using Augmented-Reality guidance
Bertrand, Fabrice	Automatic Bones Segmentation for Total Ankle Arthroplasties Planning and Navigation
Blackman, Justin	Population Specific Optimization of Glenosphere Size in Reverse Shoulder Arthroplasty Based on Sex and Height: A Japanese Statistical Shape Model Based Computational Simulation Study
Boux de Casson, François	Impact of Demographic, Implant, and Intraoperative Planning Parameters on 2-Year Outcomes in Navigation-Assisted Tibia-First Total Knee Arthroplasty: A Descriptive Study Learning Curve for rTSA Navigation Procedure With a Single System - A Large Scale Study Intraoperative Accuracy of Computer-Assisted Navigation for Treatment of Glenoids with Augmented Glenoid Components in Total Shoulder Arthroplasty
Brendle, Saskia A.	INTER-OBSERVER RELIABILITY DURING INTRA-OPERATIVE PASSIVE KNEE FLEXION: A HUMAN DONOR STUDY Intra-observer repeatability of intra-operative passive knee kinematics – a human donor study
Buist, Mirka	Correction Osteotomies with 3D Guides: Does Surgical Experience Affect Operative Accuracy? Biomechanical and Computational Validation of PatientSpecific Implants for Schatzker IV Tibial Plateau Fractures Patient-Specific Implants for Femoral and Tibial Shaft Reconstruction: A Systematic Review and Classification Framework
Burdin, Valérie	A Hybrid Physical–Digital Framework for Annotated Fracture Reduction Data Evaluated using Clinically Relevant 3D metrics Statistical Pose Model Accurately Reproduces Forearm Pronation-Supination: Cadaveric Validation
C
Cariou, Damien	Intraoperative HMD-Guided Glenoid Pin Placement in Shoulder Arthroplasty: Accuracy, Safe Zone and technical considerations Accuracy and Agreement Between Optical Navigation (NDI Polaris) and Postoperative CT for Glenoid Pin Placement: A Cadaveric Validation Study Using Augmented-Reality guidance
Carr, Nicolas	Accurate Guidewire Placement for Scaphoid Fracture Fixation Using Biplanar X-Rays
Chaoui, Jean	Intraoperative HMD-Guided Glenoid Pin Placement in Shoulder Arthroplasty: Accuracy, Safe Zone and technical considerations Accuracy and Agreement Between Optical Navigation (NDI Polaris) and Postoperative CT for Glenoid Pin Placement: A Cadaveric Validation Study Using Augmented-Reality guidance
Chen, Chih-Chieh	DEPTH-ACCURATE BINOCULAR AUGMENTED REALITY NAVITATION USING RETINAL PROJECTION FOR COMPUTER-ASSISTED ORTHOPEDIC SURGERY
Chen, Ji-Cheng	DEPTH-ACCURATE BINOCULAR AUGMENTED REALITY NAVITATION USING RETINAL PROJECTION FOR COMPUTER-ASSISTED ORTHOPEDIC SURGERY
Chen, Kexin Katie	Advancing a Tracked 2D Ultrasound System for Assessing Dysplasia Metrics Towards Clinical Deployment
Chen, Tai-Kuo	DEPTH-ACCURATE BINOCULAR AUGMENTED REALITY NAVITATION USING RETINAL PROJECTION FOR COMPUTER-ASSISTED ORTHOPEDIC SURGERY
Chinimilli, Prudhvi	IMPACT OF INSTRUMENTED GAP-BALANCING TECHNIQUE ON FUNCTIONAL ALIGNMENT TOTAL KNEE ARTHROPLASTY IN SEVERE VARUS DEFORMITY
Chinimilli, Prudhvi	IMPACT OF DYNAMIC ALIGNMENT CLUSTER PRESERVATION ON EARLY CLINICAL OUTCOMES IN NAVIGATED TOTAL KNEE ARTHROPLASTY UNDER CONTROLLED LOAD UNSUPERVISED MACHINE LEARNING DRIVEN DYNAMIC ALIGNMENT CLASSIFICATION UNDER CONTROLLED LOAD IN NAVIGATED TOTAL KNEE ARTHROPLASTY IMPACT OF THE SURGICAL WORKFLOW AND TECHNOLOGY CHANGE ON EARLY CLINICAL OUTCOMES IN TOTAL KNEE ARTHROPLASTY
Choe, Hyonmin	Accuracy of Dual Mobility Cement Cup Placement Using Augmented Reality Navigation in Hip Arthroplasty for Complex Acetabular Reconstruction Surgery
Chompoosang, Thakrit	COMPARISON OF FEMORAL COMPONENT ROTATION BETWEEN FUNCTIONAL ALIGNMENT VERSUS MECHANICAL ALIGNMENT IN BILATERAL TOTAL KNEE ARTHROPLASTY: A PROSPECTIVE RANDOMIZED CONTROLLED TRIAL Comparison of Radiologic and Clinical Outcomes of the Patella in Restricted Kinematic Alignment and Mechanical Alignment in Bilateral Robotic Total Knee Arthroplasty: A Randomized Controlled Trial
Chotanaphuti, Thanainit	Levels of constraint affect functional outcome of femoral sleeve in revision total knee arthroplasty Robotic-Assisted Versus Conventional Total Knee Arthroplasty: Differences in Posterior Cruciate Ligament Release Rates in Cruciate-Retaining Designs
Chotanaphuti, Thanainit	ACCURACY OF FEMORAL MECHANICAL AXIS REGISTRATION IN IMAGELESS ROBOTIC- ASSISTED TOTAL KNEE ARTHROPLASTY: A MULTI-CENTER COMPARISON OF THE 5-MM MEDIAL OFFSET AND INTERCONDYLAR NOTCH CENTER
Chui, Elvis Chun-Sing	EVALUATION OF LARGE LANGUAGE MODEL APPLICATIONS IN REVERSE SHOULDER ARTHROPLASTY
D
Dadia, Solomon	Novel Automated Sub-Segmentation Tool for Quantification of Tumor Features in Soft-Tissue Sarcoma of the Thigh From Imaging to Implant Design: A Fully In-Hospital Computer-Assisted Workflow for Large Bone Reconstruction Patient-Specific Ti-6Al-4V Lattice Implants for Critical-Sized, Weight-Bearing Limb Reconstruction: Average 45-months Surgical, Oncological and Functional Follow-up
Danckaers, Femke	Accurate prediction of 3D forearm shape from simple measurements
Dardenne, Guillaume	A Hybrid Physical–Digital Framework for Annotated Fracture Reduction Data Evaluated using Clinically Relevant 3D metrics Statistical Pose Model Accurately Reproduces Forearm Pronation-Supination: Cadaveric Validation 3D Reconstruction from Arthroscopic Images using NeRF: a preliminary in-silico study
Daviller, Clément	Automatic Quality Assessment and Uncertainty Localization on AI-generated digital twins of the shoulder Automatic Bones Segmentation for Total Ankle Arthroplasties Planning and Navigation
Ding, Jiawei	SCAPULOHUMERAL RHYTHM REPRODUCTION USING AN UPPER-LIMB MUSCULOSKELETAL MODEL WITH PHYSICAL SCAPULOTHORACIC CONTACT
Doi, Hideyuki	Recent Advances in Atlantoaxial Fixation: Minimizing Invasiveness While Enhancing Construct Stability
Druckmann, Ido	Novel Automated Sub-Segmentation Tool for Quantification of Tumor Features in Soft-Tissue Sarcoma of the Thigh
Dubois, Leander	An automated Statistical Shape Model workflow of the Craniomaxillofacial Complex for Shape Reconstruction
E
Edeline, Paul-Emmanuel	A Hybrid Physical–Digital Framework for Annotated Fracture Reduction Data Evaluated using Clinically Relevant 3D metrics Statistical Pose Model Accurately Reproduces Forearm Pronation-Supination: Cadaveric Validation
Elwell, Josie	Learning Curve for rTSA Navigation Procedure With a Single System - A Large Scale Study Intraoperative Accuracy of Computer-Assisted Navigation for Treatment of Glenoids with Augmented Glenoid Components in Total Shoulder Arthroplasty
F
Fang, Yanming	Cement Augmentation of Pedicle Screws May Delay Interbody Fusion After Transforaminal Lumbar Interbody Fusion
Fels, Sidney S.	Improving Workflow Efficiency of an Intraoperative Planning and Guidance System for Mandibular Reconstruction A Planar Probe More Repeatably Measures Bone Cut Planes than Stylus-Based Digitization Predicted Bone Union Propensity in Mini-Plate-Based Mandibular Reconstruction Surgery is Affected by Bone Cut Geometry
Ferreira, Antoine	3D Reconstruction from Arthroscopic Images using NeRF: a preliminary in-silico study
Fleet, Cole	Population Specific Optimization of Glenosphere Size in Reverse Shoulder Arthroplasty Based on Sex and Height: A Japanese Statistical Shape Model Based Computational Simulation Study What Is the Optimal Graft and Transfer Location in Lower Trapezius Tendon Transfer for Posterosuperior Massive Rotator Cuff Tears? A Cadaveric Biomechanical Study Optimization of Patient Specific Glenosphere Positioning in Reverse Shoulder Arthroplasty Based on Rotator Cuff Conditions: A Cadaveric Biomechanical Simulation Study
Fujibuchi, Taketsugu	Selection of Intraoperative Navigation System type in Bone Tumor Surgery Accuracy and precision of planned glenoid guide-pin placement in reverse shoulder arthroplasty: a cadaveric comparison of fluoroscopy-guided freehand technique, patient-specific instrumentation, and navigation
Fujibuchi, Taketsugu	Sex-specific anatomy and when to choose a 32-mm glenosphere in reverse shoulder arthroplasty: a 3D CT simulation and ROC analysis
Fujieda, Tsukasa	TIBIAL VARUS RESTRICTION DOES NOT COMPROMISE EARLY OUTCOMES IN ROBOTIC-ASSISTED KINEMATIC ALIGNMENT TOTAL KNEE ARTHROPLASTY
Fujimori, Takahito	Side-to-side differences in femoral neck bone mineral density in patients undergoing surgery for adult spinal deformity
Fujimori, Tkahito	Automated Laminectomy Using Collaborative Robot: Concept Verification
Fujita, Akira	3D CT Volume Reconstruction from a Single Intraoperative Hip Fluoroscopy Image
Fukuzawa, Takuma	Impact of osteosclerosis on cervical pedicle screw insertion using preoperative CT-based navigation
Funahashi, Hiroto	Clinical outcomes of navigation assisted transtrochanteric rotational osteotomy for osteonecrosis of the head
Furuya, Masayuki	Automated Laminectomy Using Collaborative Robot: Concept Verification
Fürmetz, Julian	Patient-specific biomechanical analysis of the tibiofemoral tipping point in owHTO Analysis of inter-individual morphological variability in owHTO patients
G
Ganping, Li	Automated Multi-Severity Classification and Collapse Risk Prediction of Osteonecrosis of the Femoral Head from MRI: Integrating Deep Learning and Geometric Analysis
Gauci, Marc-Olivier	Statistical Pose Model Accurately Reproduces Forearm Pronation-Supination: Cadaveric Validation
Gauci, Marc-Olivier	A Hybrid Physical–Digital Framework for Annotated Fracture Reduction Data Evaluated using Clinically Relevant 3D metrics
Gerbers, Jasper	HOW DO WE MEASURE WHAT WE ACHIEVE: ACCURACY OF 3D SURGICAL PLANS IN COMPLEX ORTHOPEDIC PROCEDURES
Giles, Joshua	Population Specific Optimization of Glenosphere Size in Reverse Shoulder Arthroplasty Based on Sex and Height: A Japanese Statistical Shape Model Based Computational Simulation Study Optimization of Patient Specific Glenosphere Positioning in Reverse Shoulder Arthroplasty Based on Rotator Cuff Conditions: A Cadaveric Biomechanical Simulation Study
Gilmore, Kevin	Improving Workflow Efficiency of an Intraoperative Planning and Guidance System for Mandibular Reconstruction
Golden, Eran	From Imaging to Implant Design: A Fully In-Hospital Computer-Assisted Workflow for Large Bone Reconstruction Patient-Specific Ti-6Al-4V Lattice Implants for Critical-Sized, Weight-Bearing Limb Reconstruction: Average 45-months Surgical, Oncological and Functional Follow-up
Gortzak, Yair	Novel Automated Sub-Segmentation Tool for Quantification of Tumor Features in Soft-Tissue Sarcoma of the Thigh From Imaging to Implant Design: A Fully In-Hospital Computer-Assisted Workflow for Large Bone Reconstruction Patient-Specific Ti-6Al-4V Lattice Implants for Critical-Sized, Weight-Bearing Limb Reconstruction: Average 45-months Surgical, Oncological and Functional Follow-up
Gosho, Shinnosuke	Navigation accuracy according to cup geometry and fixation method in total hip arthroplasty
Gromov, Kirill	FURTHER POSTERIOR DWELLING OF THE FEMORAL COMPONENT ON AN MC COMPARED TO A CR BEARING. A FLUOROSCOPIC KINEMATIC ANALYSIS FROM A RANDOMISED CONTROLLED TRIAL
Grupp, Milan A.	INTER-OBSERVER RELIABILITY DURING INTRA-OPERATIVE PASSIVE KNEE FLEXION: A HUMAN DONOR STUDY Intra-observer repeatability of intra-operative passive knee kinematics – a human donor study
Grupp, Thomas M.	INTER-OBSERVER RELIABILITY DURING INTRA-OPERATIVE PASSIVE KNEE FLEXION: A HUMAN DONOR STUDY Intra-observer repeatability of intra-operative passive knee kinematics – a human donor study
Gu, Bon-Sang	ASSOCIATION OF PLASMA PROTEOMIC SIGNATURES WITH THIGH MUSCLE ADIPOSITY
Gu, Yi	Construction of Statistical Shape Models for Lumbar Vertebrae and Femur from QCT Images and Analysis of Age-Related Changes in Bone Quality Parameters Depthmap-based 2D–3D Reconstruction of the Carpal Bones from a Single-View Radiograph for Deformity Diagnosis and Treatment Planning Automated Segmentation of the Sacral Canal for Large-Scale Analysis of Demographic, Densitometric and Morphometric Sacral Measurements in CT Images
Gu, Yi	Lumbar volumetric Bone Mineral Density Estimation from A Plain X-ray via Generation of BMD Distribution Maps.
Guezou-Philippe, Aziliz	A Hybrid Physical–Digital Framework for Annotated Fracture Reduction Data Evaluated using Clinically Relevant 3D metrics Statistical Pose Model Accurately Reproduces Forearm Pronation-Supination: Cadaveric Validation 3D Reconstruction from Arthroscopic Images using NeRF: a preliminary in-silico study
H
Hagiwara, Koji	Treatment for malignant bone tumor with patient’ specific cutting guide
Hamada, Hidetoshi	Variation and agreement rate in preoperative three-dimensional planning for total hip arthroplasty across hip surgeons Clinical and radiographic outcomes of rotational acetabular osteotomy using CT-based navigation for developmental dysplasia of the hip Automated Multi-Severity Classification and Collapse Risk Prediction of Osteonecrosis of the Femoral Head from MRI: Integrating Deep Learning and Geometric Analysis Side-to-side differences in femoral neck bone mineral density in patients undergoing surgery for adult spinal deformity Comparison of lower limb muscle characteristics, femoral morphology, and bone mineral density between femoral neck and intertrochanteric fractures using AI-based CT analysis Effect of skin incision orientation on acetabular cup placement accuracy and precision in anterolateral supine approach total hip arthroplasty using computed tomography-based navigation Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index
Hamada, Hidetoshi	Role of Implant Range of Motion in Preventing Recurrent Anterior Dislocation After Revision Total Hip Arthroplasty CT-Based Navigation Reduces Outliers and Osteotomy Variability in Curved Varus Osteotomy for Osteonecrosis of the Femoral Head: A Retrospective Comparative Study
Hamada, Hidetoshi	Construction of Statistical Shape Models for Lumbar Vertebrae and Femur from QCT Images and Analysis of Age-Related Changes in Bone Quality Parameters
Han, Hyuk-Soo	Robotic-Arm Assisted Bicompartmental Knee Arthroplasty Demonstrates More Physiological Gait Despite Similar Patient-Reported Outcomes Compared With Total Knee Arthroplasty
Han, Seung Beom	Postoperative patient-reported pain and opioid consumption after total hip arthroplasty: Propensity score matched comparison of the direct superior and posterior approaches
Hanada, Mitsuru	Investigation of the Opening Gap Required to Preserve Posterior Tibial Slope According to the Sagittal Anterior–Posterior Inclination of the Osteotomy Plane in Medial Open-Wedge High Tibial Osteotomy
Hara, Kenta	SCAPULOHUMERAL RHYTHM REPRODUCTION USING AN UPPER-LIMB MUSCULOSKELETAL MODEL WITH PHYSICAL SCAPULOTHORACIC CONTACT
Hasegawa, Masahiro	CLINICAL OUTCOMES AND SOFT TISSUE LAXITY AFTER ROBOT-ASSISTED FUNCTIONALLY AND MECHANICALLY ALIGNED TOTAL KNEE ARTHROPLASTY ACCURACY OF IMPLANT PLACEMENT IN ROBOTIC-ASSISTED UNICOMPARTMENTAL KNEE ARTHROPLASTY USING THE CORI SYSTEM COMPARISON OF ACCURACY OF CUP POSITION IN TOTAL HIP ARTHROPLASTY USING NAVBIT SPRINT AND AR-BASED CT NAVIGATION Factors influencing patient-reported outcome measures two years after handheld robotic assisted bi-cruciate stabilized total knee arthroplasty
Hasegawa, Masahiro	COMPARISON OF ACETABULAR CUP PLACEMENT BETWEEN CT-BASED AND PINLESS PORTABLE NAVIGATION SYSTEMS USING AUGMENTED REALITY IN TOTAL HIP ARTHROPLASTY
Hayashi, Shinya	Comparison of Implant Positioning Accuracy Between Mako and ROSA Robotic-Assisted Total Knee Arthroplasty Using Three-Dimensional CT Analysis
Heebthamai, Danai	Robotic-Assisted Versus Conventional Total Knee Arthroplasty: Differences in Posterior Cruciate Ligament Release Rates in Cruciate-Retaining Designs
Hekman, Edsko	Using A Novel Patient-Specific Guide with Radiopaque Alignment for Sacroiliac Joint Fusion: A Case Series
Hickey, Matthew	Accurate Guidewire Placement for Scaphoid Fracture Fixation Using Biplanar X-Rays
Hieda, Yuta	Accuracy of Dual Mobility Cement Cup Placement Using Augmented Reality Navigation in Hip Arthroplasty for Complex Acetabular Reconstruction Surgery
Higashihira, Shota	Computer Navigation–Assisted Osteochondroplasty Improves Achievement of Preoperative Cam Resection Plans in Femoroacetabular Impingement
Higuchi, Ryo	Variation and agreement rate in preoperative three-dimensional planning for total hip arthroplasty across hip surgeons Clinical and radiographic outcomes of rotational acetabular osteotomy using CT-based navigation for developmental dysplasia of the hip Side-to-side differences in femoral neck bone mineral density in patients undergoing surgery for adult spinal deformity CT-Based Navigation Reduces Outliers and Osteotomy Variability in Curved Varus Osteotomy for Osteonecrosis of the Femoral Head: A Retrospective Comparative Study Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index
Higuchi, Ryo	Comparison of lower limb muscle characteristics, femoral morphology, and bone mineral density between femoral neck and intertrochanteric fractures using AI-based CT analysis
Hino, Kazunori	Preoperative Determinants of Patient Satisfaction in End-Stage Knee Osteoarthritis: A Focus on Pain Catastrophizing and Daily Physical Activity
Hino, Kazunori	Oral hypofunction is associated with reduced skeletal muscle mass index in elderly women with end-stage knee osteoarthritis: a clinical assessment adjusted for objectively measured physical activity
Hino, Kazunori	Evaluation of the use of a pressure-dispersion pad for kneeling after total knee arthroplasty
Hino, Masayuki	Feasibility of 3D-Printed Rigid Spinal Orthoses Using Patient Scan Data Strategic Approach in Full-Endoscopic Spine Surgery: Bilateral Contralateral Laminoplasty (FE-BCL) to Preserve Posterior Stabilizing Structures Regardless of Anatomical Variations
Hino, Masayuki	Clinical Outcomes of Full-Endoscopic Foraminotomy Assisted by O-arm Navigation for Cervical Radiculopathy
Hiraiwa, Toshihito	Intraoperative Changes in Hip Range of Motion Following Total Hip Arthroplasty: A Quantitative Analysis Using CT-Based Navigation.
Hiraiwa, Toshihito	Artificial Intelligence Guided Segmentation of Novel CT-Based Navigation Produced Quick Preoperative Preparation and Accurate Cup Placement in Total Hip Arthroplasty
Hirao, Makoto	IMPACT OF INSTRUMENTED GAP-BALANCING TECHNIQUE ON FUNCTIONAL ALIGNMENT TOTAL KNEE ARTHROPLASTY IN SEVERE VARUS DEFORMITY
Hirasawa, Naoyuki	A Smartphone-Based Augmented Reality–Aided Navigation System for Knee Arthroplasty Case reports of robotic-assisted hip arthroplasty after wide excision of pubic chondrosarcoma in the anterolateral approach. A SMARTPHONE-BASED AUGMENTED REALITY NAVIGATION SYSTEM FOR HIP ARTHROPLASTY
Hodgson, Antony J.	Improving Workflow Efficiency of an Intraoperative Planning and Guidance System for Mandibular Reconstruction Accurate Guidewire Placement for Scaphoid Fracture Fixation Using Biplanar X-Rays A Planar Probe More Repeatably Measures Bone Cut Planes than Stylus-Based Digitization Predicted Bone Union Propensity in Mini-Plate-Based Mandibular Reconstruction Surgery is Affected by Bone Cut Geometry Advancing a Tracked 2D Ultrasound System for Assessing Dysplasia Metrics Towards Clinical Deployment
Homma, Yasuhiro	Optimizing Stem Length in Conversion Total Hip Arthroplasty After Intertrochanteric Fracture: A Finite Element Analysis
Hongama, Seiko	Oral hypofunction is associated with reduced skeletal muscle mass index in elderly women with end-stage knee osteoarthritis: a clinical assessment adjusted for objectively measured physical activity Association Between Oral Function and Postoperative Physical Activity Following Total Hip Arthroplasty: A Prospective Observational Study
Hoogeslag, Roy	Leg alignment normal values of a 2D framework might not be valid for a consensus-based 3D framework
Horita, Yusuke	Preoperative Determinants of Patient Satisfaction in End-Stage Knee Osteoarthritis: A Focus on Pain Catastrophizing and Daily Physical Activity Oral hypofunction is associated with reduced skeletal muscle mass index in elderly women with end-stage knee osteoarthritis: a clinical assessment adjusted for objectively measured physical activity Evaluation of the use of a pressure-dispersion pad for kneeling after total knee arthroplasty
Horita, Yusuke	Association Between Oral Function and Postoperative Physical Activity Following Total Hip Arthroplasty: A Prospective Observational Study
Hosoyama, Tsuguaki	Navigation accuracy according to cup geometry and fixation method in total hip arthroplasty
Hosozawa, Koki	Automated Laminectomy Using Collaborative Robot: Concept Verification
Hotta, Kensuke	Investigation of the Opening Gap Required to Preserve Posterior Tibial Slope According to the Sagittal Anterior–Posterior Inclination of the Osteotomy Plane in Medial Open-Wedge High Tibial Osteotomy
Huddleston, James	IMPACT OF INSTRUMENTED GAP-BALANCING TECHNIQUE ON FUNCTIONAL ALIGNMENT TOTAL KNEE ARTHROPLASTY IN SEVERE VARUS DEFORMITY UNSUPERVISED MACHINE LEARNING DRIVEN DYNAMIC ALIGNMENT CLASSIFICATION UNDER CONTROLLED LOAD IN NAVIGATED TOTAL KNEE ARTHROPLASTY
Hung, Shuo-Suei	DEPTH-ACCURATE BINOCULAR AUGMENTED REALITY NAVITATION USING RETINAL PROJECTION FOR COMPUTER-ASSISTED ORTHOPEDIC SURGERY
Hwang, Chang-Soon	Design and Evaluation of a Wireless Robotic System for Long-Bone Fracture Reduction
Hwang, Jihyo	Comparison of Patellofemoral Joint Morphology Between Functionally and Mechanically Aligned Total Knee Arthroplasty A Novel Modified Tibial Knee Center Improves the Accuracy of Posterior Tibial Slope in CT-Based Robotic-Arm Assisted Total Knee Arthroplasty Does an Enhanced Workflow Improve Clinical Outcomes in MAKO Total Hip Arthroplasty? A Comparative Study with the Express Workflow
I
Iamthanaporn, Khanin	ACCURACY OF FEMORAL MECHANICAL AXIS REGISTRATION IN IMAGELESS ROBOTIC- ASSISTED TOTAL KNEE ARTHROPLASTY: A MULTI-CENTER COMPARISON OF THE 5-MM MEDIAL OFFSET AND INTERCONDYLAR NOTCH CENTER
Igei, Takahiro	Evaluation of bilateral symmetry of periacetabular morphology without reference to the femoral head on CT axial images
Ihara, Yasutaka	Difference of muscle volume and myosteatosis of lower limb muscles between knee osteoarthritis and hip osteoarthritis: artificial intelligence-based computed tomography analysis
Iio, Ryosuke	Population Specific Optimization of Glenosphere Size in Reverse Shoulder Arthroplasty Based on Sex and Height: A Japanese Statistical Shape Model Based Computational Simulation Study What Is the Optimal Graft and Transfer Location in Lower Trapezius Tendon Transfer for Posterosuperior Massive Rotator Cuff Tears? A Cadaveric Biomechanical Study Optimization of Patient Specific Glenosphere Positioning in Reverse Shoulder Arthroplasty Based on Rotator Cuff Conditions: A Cadaveric Biomechanical Simulation Study
Ijpma, Frank	Correction Osteotomies with 3D Guides: Does Surgical Experience Affect Operative Accuracy? Biomechanical and Computational Validation of PatientSpecific Implants for Schatzker IV Tibial Plateau Fractures Patient-Specific Implants for Femoral and Tibial Shaft Reconstruction: A Systematic Review and Classification Framework
Ike, Hiroyuki	Accuracy of Dual Mobility Cement Cup Placement Using Augmented Reality Navigation in Hip Arthroplasty for Complex Acetabular Reconstruction Surgery
Ikegami, Shota	Impact of osteosclerosis on cervical pedicle screw insertion using preoperative CT-based navigation
Ikuta, Futoshi	IMPACT OF INSTRUMENTED GAP-BALANCING TECHNIQUE ON FUNCTIONAL ALIGNMENT TOTAL KNEE ARTHROPLASTY IN SEVERE VARUS DEFORMITY
Ikuta, Kemmei	Comparison of Implant Positioning Accuracy Between Mako and ROSA Robotic-Assisted Total Knee Arthroplasty Using Three-Dimensional CT Analysis
Imagama, Takashi	Comparing clinical and radiological outcomes for a three-dimensional printed highly porous cup and a hydroxyapatite-coated non-highly porous cup in computed tomography–navigated total hip arthroplasty using propensity score matching Accuracy of Acetabular Cup Placement Using the CT-Based Navigation System Ortoma Treatment Solution in Total Hip Arthroplasty
Imai, Hirotatsu	Automated Laminectomy Using Collaborative Robot: Concept Verification
Inaba, Yutaka	Computer Navigation–Assisted Osteochondroplasty Improves Achievement of Preoperative Cam Resection Plans in Femoroacetabular Impingement Accuracy of Dual Mobility Cement Cup Placement Using Augmented Reality Navigation in Hip Arthroplasty for Complex Acetabular Reconstruction Surgery
Ingelsrud, Lina Holm	FURTHER POSTERIOR DWELLING OF THE FEMORAL COMPONENT ON AN MC COMPARED TO A CR BEARING. A FLUOROSCOPIC KINEMATIC ANALYSIS FROM A RANDOMISED CONTROLLED TRIAL
Inoue, Atsushi	Three-dimensional Computed Tomography Based Preoperative Simulation for Intramedullary Nailing of Distal Tibial Fractures; Both Reduction and Implanting Simulation
Inoue, Naoya	Comprehensive Gait Evaluation in Patients With Knee Osteoarthritis: Assessment Using a Smartphone-Based Markerless Motion Capture System
Inoue, Tomohiro	ACCURACY VERIFICATION OF AN AI-BASED NAVIGATION SYSTEM FOR THA IN SEVERE HIP DYSPLASIA: IMPACT OF AUTOMATED SEGMENTATION SPEED AND ILIAC CREST REGISTRATION
Inui, Hiroshi	Perioperative Femorotibial Rotational Change is Associated with Worsened Intraoperative Knee Kinematics and Poorer Clinical Outcomes in Total Knee Arthroplasty
Ishida, Kazunari	Comparison of Implant Positioning Accuracy Between Mako and ROSA Robotic-Assisted Total Knee Arthroplasty Using Three-Dimensional CT Analysis
Ito, Akito	Oral hypofunction is associated with reduced skeletal muscle mass index in elderly women with end-stage knee osteoarthritis: a clinical assessment adjusted for objectively measured physical activity Difference of muscle volume and myosteatosis of lower limb muscles between knee osteoarthritis and hip osteoarthritis: artificial intelligence-based computed tomography analysis Which Cross-Sectional Area of the Lower Leg Muscle on Computed Tomography Reflects Skeletal Muscle Mass Reduction in Patients with Hip Osteoarthritis Most? CT-Based Navigation Reduces Outliers and Osteotomy Variability in Curved Varus Osteotomy for Osteonecrosis of the Femoral Head: A Retrospective Comparative Study Association Between Oral Function and Postoperative Physical Activity Following Total Hip Arthroplasty: A Prospective Observational Study
Ito, Yoichi	Population Specific Optimization of Glenosphere Size in Reverse Shoulder Arthroplasty Based on Sex and Height: A Japanese Statistical Shape Model Based Computational Simulation Study
Ito, Yoshiaki	Intraoperative Changes in Hip Range of Motion Following Total Hip Arthroplasty: A Quantitative Analysis Using CT-Based Navigation.
Iwahashi, Toru	Cartilage Visualization on Dual-Energy CT Using Optimized Material Pairing
Iwaisako, Keiji	Side-to-side differences in femoral neck bone mineral density in patients undergoing surgery for adult spinal deformity
J
Jackson, Corey	IMPACT OF DYNAMIC ALIGNMENT CLUSTER PRESERVATION ON EARLY CLINICAL OUTCOMES IN NAVIGATED TOTAL KNEE ARTHROPLASTY UNDER CONTROLLED LOAD IMPACT OF THE SURGICAL WORKFLOW AND TECHNOLOGY CHANGE ON EARLY CLINICAL OUTCOMES IN TOTAL KNEE ARTHROPLASTY
Jammal, Mahmoud	Use of Custom 3D-Printed Titanium Implants for Partial Joint Resurfacing Following Traumatic Injuries: A Preliminary Report
Jang, Woo Young	Postoperative patient-reported pain and opioid consumption after total hip arthroplasty: Propensity score matched comparison of the direct superior and posterior approaches
Johnson, James	Population Specific Optimization of Glenosphere Size in Reverse Shoulder Arthroplasty Based on Sex and Height: A Japanese Statistical Shape Model Based Computational Simulation Study What Is the Optimal Graft and Transfer Location in Lower Trapezius Tendon Transfer for Posterosuperior Massive Rotator Cuff Tears? A Cadaveric Biomechanical Study Optimization of Patient Specific Glenosphere Positioning in Reverse Shoulder Arthroplasty Based on Rotator Cuff Conditions: A Cadaveric Biomechanical Simulation Study
Jose Bonta Suarez, Maria	Advancing a Tracked 2D Ultrasound System for Assessing Dysplasia Metrics Towards Clinical Deployment
Joshi, Tej	Intraoperative Accuracy of Computer-Assisted Navigation for Treatment of Glenoids with Augmented Glenoid Components in Total Shoulder Arthroplasty
Joung, Sanghyun	Design and Evaluation of a Wireless Robotic System for Long-Bone Fracture Reduction
Ju, Won Jik	Postoperative patient-reported pain and opioid consumption after total hip arthroplasty: Propensity score matched comparison of the direct superior and posterior approaches
Jung, Amaury	IMPACT OF DYNAMIC ALIGNMENT CLUSTER PRESERVATION ON EARLY CLINICAL OUTCOMES IN NAVIGATED TOTAL KNEE ARTHROPLASTY UNDER CONTROLLED LOAD Learning Curve for rTSA Navigation Procedure With a Single System - A Large Scale Study Intraoperative Accuracy of Computer-Assisted Navigation for Treatment of Glenoids with Augmented Glenoid Components in Total Shoulder Arthroplasty UNSUPERVISED MACHINE LEARNING DRIVEN DYNAMIC ALIGNMENT CLASSIFICATION UNDER CONTROLLED LOAD IN NAVIGATED TOTAL KNEE ARTHROPLASTY IMPACT OF THE SURGICAL WORKFLOW AND TECHNOLOGY CHANGE ON EARLY CLINICAL OUTCOMES IN TOTAL KNEE ARTHROPLASTY
Jung, Ho-Jung	Comparison of Patellofemoral Joint Morphology Between Functionally and Mechanically Aligned Total Knee Arthroplasty A Novel Modified Tibial Knee Center Improves the Accuracy of Posterior Tibial Slope in CT-Based Robotic-Arm Assisted Total Knee Arthroplasty
Jung, Hojung	Does an Enhanced Workflow Improve Clinical Outcomes in MAKO Total Hip Arthroplasty? A Comparative Study with the Express Workflow
Jutte, Paul	Correction Osteotomies with 3D Guides: Does Surgical Experience Affect Operative Accuracy? Biomechanical and Computational Validation of PatientSpecific Implants for Schatzker IV Tibial Plateau Fractures Patient-Specific Implants for Femoral and Tibial Shaft Reconstruction: A Systematic Review and Classification Framework
K
Kaku, Nobuhiro	Navigation accuracy according to cup geometry and fixation method in total hip arthroplasty
Kameda, Yuito	Automated Multi-Severity Classification and Collapse Risk Prediction of Osteonecrosis of the Femoral Head from MRI: Integrating Deep Learning and Geometric Analysis
Kamei, Goki	Comparative analysis of intraoperative kinematics among different total knee arthroplasty designs: Can we restore medial pivot and eliminate anterior paradoxical motion?
Kampkuiper, Nick	Using A Novel Patient-Specific Guide with Radiopaque Alignment for Sacroiliac Joint Fusion: A Case Series
Kanazawa, Masatake	Accuracy and precision of planned glenoid guide-pin placement in reverse shoulder arthroplasty: a cadaveric comparison of fluoroscopy-guided freehand technique, patient-specific instrumentation, and navigation
Kandels, Theresa	Patient-specific biomechanical analysis of the tibiofemoral tipping point in owHTO Analysis of inter-individual morphological variability in owHTO patients
Kaneoka, Takehiro	Comparing clinical and radiological outcomes for a three-dimensional printed highly porous cup and a hydroxyapatite-coated non-highly porous cup in computed tomography–navigated total hip arthroplasty using propensity score matching
Kaneta, Hiroki	Femoral Stem Alignment and Post-operative Patient Satisfaction in Total Hip Arthroplasty Using Computer-Assisted Equipment
Kanie, Yuya	Automated Laminectomy Using Collaborative Robot: Concept Verification
Kappert, Kilian	Predicting Plantar Pressure from Non-Weight-Bearing MRI Using a Finite Element Model 3D Virtual Surgical Planning and Patient Specific Guide Design for Lapidus Surgery in a Hallux Valgus Patient
Kato, Keiichi	Comparing clinical and radiological outcomes for a three-dimensional printed highly porous cup and a hydroxyapatite-coated non-highly porous cup in computed tomography–navigated total hip arthroplasty using propensity score matching Accuracy of Acetabular Cup Placement Using the CT-Based Navigation System Ortoma Treatment Solution in Total Hip Arthroplasty
Kato, Koji	Construction of an Online Surgical Training System Using Omnidirectional Video Streaming
Kawaguchi, Kohei	Perioperative Femorotibial Rotational Change is Associated with Worsened Intraoperative Knee Kinematics and Poorer Clinical Outcomes in Total Knee Arthroplasty
Kawai, Toshiyuki	3D CT Volume Reconstruction from a Single Intraoperative Hip Fluoroscopy Image
Kawakami, Takehiro	Comparing clinical and radiological outcomes for a three-dimensional printed highly porous cup and a hydroxyapatite-coated non-highly porous cup in computed tomography–navigated total hip arthroplasty using propensity score matching
Kawamoto, Taisei	Augmented Reality Using Smartphones for Total Knee Arthroplasty
Khuangsirikul, Saradej	Levels of constraint affect functional outcome of femoral sleeve in revision total knee arthroplasty
Khuangsirikul, Saradej	Robotic-Assisted Versus Conventional Total Knee Arthroplasty: Differences in Posterior Cruciate Ligament Release Rates in Cruciate-Retaining Designs
Kidani, Teruki	Selection of Intraoperative Navigation System type in Bone Tumor Surgery
Kihara, Shinsuke	Comparison of Implant Positioning Accuracy Between Mako and ROSA Robotic-Assisted Total Knee Arthroplasty Using Three-Dimensional CT Analysis
Kim, Hasung	ROBOTIC CONTROL OF ALL -IN-ONE SOLUTION FOR KNEE BALANCE AND ALIGNMENT OF PRIMARY TOTAL KNEE ARTHROPLASTY
Kim, Hyeonsu	ACCESSIBLE SARCOPENIA SCREENING VIA MUSCLE VOLUME ESTIMATION FROM THREE-VIEW LONG-LENGTH LOWER-EXTREMITY RADIOGRAPHS ASSOCIATION OF PLASMA PROTEOMIC SIGNATURES WITH THIGH MUSCLE ADIPOSITY
Kim, Hyun-Bin	ASSOCIATION OF PLASMA PROTEOMIC SIGNATURES WITH THIGH MUSCLE ADIPOSITY
Kim, Joogil	Does an Enhanced Workflow Improve Clinical Outcomes in MAKO Total Hip Arthroplasty? A Comparative Study with the Express Workflow
Kim, Joon-Woo	Design and Evaluation of a Wireless Robotic System for Long-Bone Fracture Reduction
Kim, Joong Il	Comparison of Patellofemoral Joint Morphology Between Functionally and Mechanically Aligned Total Knee Arthroplasty A Novel Modified Tibial Knee Center Improves the Accuracy of Posterior Tibial Slope in CT-Based Robotic-Arm Assisted Total Knee Arthroplasty
Kim, Keonwoo	ROBOTIC CONTROL OF ALL -IN-ONE SOLUTION FOR KNEE BALANCE AND ALIGNMENT OF PRIMARY TOTAL KNEE ARTHROPLASTY
Kim, Seong Hwan	ROBOTIC-ARM ASSISTED TOTAL KNEE ARTHROPLASTY IS ASSOCIATED WITH IMPROVED EARLY FUNCTIONAL RECOVERY COMPARED WITH CONVENTIONAL TOTAL KNEE ARTHROPLASTY Preoperative Patellofemoral Alignment Affects Anterior Knee Pain After Primary Total Knee Arthroplasty Without Patellar Resurfacing
Kimura, Hiroaki	Treatment for malignant bone tumor with patient’ specific cutting guide
Kinoshita, Tomofumi	A Computed Tomography-Based Simulation of Stair Climbing after Curved Varus Osteotomy for Osteonecrosis of the Femoral Head Focusing on the Non-necrotic Weightbearing Area Oral hypofunction is associated with reduced skeletal muscle mass index in elderly women with end-stage knee osteoarthritis: a clinical assessment adjusted for objectively measured physical activity Evaluation of the use of a pressure-dispersion pad for kneeling after total knee arthroplasty Difference of muscle volume and myosteatosis of lower limb muscles between knee osteoarthritis and hip osteoarthritis: artificial intelligence-based computed tomography analysis Which Cross-Sectional Area of the Lower Leg Muscle on Computed Tomography Reflects Skeletal Muscle Mass Reduction in Patients with Hip Osteoarthritis Most? Sex-specific anatomy and when to choose a 32-mm glenosphere in reverse shoulder arthroplasty: a 3D CT simulation and ROC analysis Accuracy and precision of planned glenoid guide-pin placement in reverse shoulder arthroplasty: a cadaveric comparison of fluoroscopy-guided freehand technique, patient-specific instrumentation, and navigation
Kinoshita, Tomofumi	Preoperative Determinants of Patient Satisfaction in End-Stage Knee Osteoarthritis: A Focus on Pain Catastrophizing and Daily Physical Activity Association Between Oral Function and Postoperative Physical Activity Following Total Hip Arthroplasty: A Prospective Observational Study
Kishimoto, Koki	Automated Laminectomy Using Collaborative Robot: Concept Verification
Kitade, Makoto	Effect of skin incision orientation on acetabular cup placement accuracy and precision in anterolateral supine approach total hip arthroplasty using computed tomography-based navigation
Kitio Tsamo, Hermine	3D Reconstruction from Arthroscopic Images using NeRF: a preliminary in-silico study
Kiyomatsu, Hiroshi	Sex-specific anatomy and when to choose a 32-mm glenosphere in reverse shoulder arthroplasty: a 3D CT simulation and ROC analysis Accuracy and precision of planned glenoid guide-pin placement in reverse shoulder arthroplasty: a cadaveric comparison of fluoroscopy-guided freehand technique, patient-specific instrumentation, and navigation
Kobayashi, Gai	CLINICAL OUTCOMES AND SOFT TISSUE LAXITY AFTER ROBOT-ASSISTED FUNCTIONALLY AND MECHANICALLY ALIGNED TOTAL KNEE ARTHROPLASTY ACCURACY OF IMPLANT PLACEMENT IN ROBOTIC-ASSISTED UNICOMPARTMENTAL KNEE ARTHROPLASTY USING THE CORI SYSTEM COMPARISON OF ACCURACY OF CUP POSITION IN TOTAL HIP ARTHROPLASTY USING NAVBIT SPRINT AND AR-BASED CT NAVIGATION COMPARISON OF ACETABULAR CUP PLACEMENT BETWEEN CT-BASED AND PINLESS PORTABLE NAVIGATION SYSTEMS USING AUGMENTED REALITY IN TOTAL HIP ARTHROPLASTY Factors influencing patient-reported outcome measures two years after handheld robotic assisted bi-cruciate stabilized total knee arthroplasty
Kobayashi, Naomi	Computer Navigation–Assisted Osteochondroplasty Improves Achievement of Preoperative Cam Resection Plans in Femoroacetabular Impingement Accuracy of Dual Mobility Cement Cup Placement Using Augmented Reality Navigation in Hip Arthroplasty for Complex Acetabular Reconstruction Surgery
Koenrades, Maaike	Using A Novel Patient-Specific Guide with Radiopaque Alignment for Sacroiliac Joint Fusion: A Case Series Innovative Technique for Less Invasive Revision of Cemented Total Hip Arthroplasty with Patient Specific Surgical Guides 3D Virtual Surgical Planning and Patient Specific Guide Design for Lapidus Surgery in a Hallux Valgus Patient
Kondo, Hiroki	Cartilage Visualization on Dual-Energy CT Using Optimized Material Pairing
Kondo, Miho	Intraoperative Changes in Hip Range of Motion Following Total Hip Arthroplasty: A Quantitative Analysis Using CT-Based Navigation.
Kono, Kenichi	Perioperative Femorotibial Rotational Change is Associated with Worsened Intraoperative Knee Kinematics and Poorer Clinical Outcomes in Total Knee Arthroplasty
Kono, Kohei	A Computed Tomography-Based Simulation of Stair Climbing after Curved Varus Osteotomy for Osteonecrosis of the Femoral Head Focusing on the Non-necrotic Weightbearing Area Selection of Intraoperative Navigation System type in Bone Tumor Surgery Difference of muscle volume and myosteatosis of lower limb muscles between knee osteoarthritis and hip osteoarthritis: artificial intelligence-based computed tomography analysis Which Cross-Sectional Area of the Lower Leg Muscle on Computed Tomography Reflects Skeletal Muscle Mass Reduction in Patients with Hip Osteoarthritis Most? Association Between Oral Function and Postoperative Physical Activity Following Total Hip Arthroplasty: A Prospective Observational Study
Kono, Kohei	CT-Based Navigation Reduces Outliers and Osteotomy Variability in Curved Varus Osteotomy for Osteonecrosis of the Femoral Head: A Retrospective Comparative Study
Kono, Sotaro	Variation and agreement rate in preoperative three-dimensional planning for total hip arthroplasty across hip surgeons Clinical and radiographic outcomes of rotational acetabular osteotomy using CT-based navigation for developmental dysplasia of the hip Automated Multi-Severity Classification and Collapse Risk Prediction of Osteonecrosis of the Femoral Head from MRI: Integrating Deep Learning and Geometric Analysis Difference of muscle volume and myosteatosis of lower limb muscles between knee osteoarthritis and hip osteoarthritis: artificial intelligence-based computed tomography analysis Which Cross-Sectional Area of the Lower Leg Muscle on Computed Tomography Reflects Skeletal Muscle Mass Reduction in Patients with Hip Osteoarthritis Most? Side-to-side differences in femoral neck bone mineral density in patients undergoing surgery for adult spinal deformity Comparison of lower limb muscle characteristics, femoral morphology, and bone mineral density between femoral neck and intertrochanteric fractures using AI-based CT analysis CT-Based Navigation Reduces Outliers and Osteotomy Variability in Curved Varus Osteotomy for Osteonecrosis of the Femoral Head: A Retrospective Comparative Study CIRCUMFERENTIAL ANALYSIS OF ILIOPSOAS IMPINGEMENT RISK USING AI-BASED MUSCLE SEGMENTATION AND THE RADAR CHART METHOD: A CUP PLACEMENT SIMULATION STUDY Automated Segmentation of the Sacral Canal for Large-Scale Analysis of Demographic, Densitometric and Morphometric Sacral Measurements in CT Images Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index
Koyama, Hiroshi	Three-dimensional evaluation of intertrochanteric femoral fractures: reproducibility and validity of a coordinate system based on the theoretical plane to place the implant (TPI) Three-dimensional Relationship Between the Obturator Externus Footprint and the Proximal Femoral Axis.
Koyama, Tsuyoshi	TOTAL HIP ARTHROPLASTY FOR ANKYLOSED HIP USING A THREE-DIMENSIONAL PRINTED MODEL AND CT-BASED NAVIGATION: A CASE REPORT Symptom Duration–Related Muscle Atrophy And Fatty Degeneration Around The Hip Joint In Unilateral Hip Osteoarthritis: An AI-Based Imaging Study
Kozuma, Yosuke	POSTOPERATIVE SPORT-INCLUSIVE ACTIVITY AFTER COMPUTER-ASSISTED TOTAL HIP ARTHROPLASTY: ASSOCIATION WITH CUP PLACEMENT ACCURACY AND CENTER OF ROTATION REPRODUCIBILITY Influence of Three-Dimensional Hip Parameters Change on Lower Limb Kinematics and Kinetics During Gait Following Total Hip Arthroplasty Femoral Stem Alignment and Post-operative Patient Satisfaction in Total Hip Arthroplasty Using Computer-Assisted Equipment
Kroezen, Sam	3D Virtual Surgical Planning and Patient Specific Guide Design for Lapidus Surgery in a Hallux Valgus Patient
Kumagai, Ken	Accuracy of Dual Mobility Cement Cup Placement Using Augmented Reality Navigation in Hip Arthroplasty for Complex Acetabular Reconstruction Surgery
Kuniyoshi, Sakura	Evaluation of bilateral symmetry of periacetabular morphology without reference to the femoral head on CT axial images CIRCUMFERENTIAL ANALYSIS OF ILIOPSOAS IMPINGEMENT RISK USING AI-BASED MUSCLE SEGMENTATION AND THE RADAR CHART METHOD: A CUP PLACEMENT SIMULATION STUDY
Kuperus, Anne	Innovative Technique for Less Invasive Revision of Cemented Total Hip Arthroplasty with Patient Specific Surgical Guides
Kuroda, Ryosuke	Comparison of Implant Positioning Accuracy Between Mako and ROSA Robotic-Assisted Total Knee Arthroplasty Using Three-Dimensional CT Analysis
Kurogochi, Daisuke	Impact of osteosclerosis on cervical pedicle screw insertion using preoperative CT-based navigation
Kutsuna, Tatsuhiko	Preoperative Determinants of Patient Satisfaction in End-Stage Knee Osteoarthritis: A Focus on Pain Catastrophizing and Daily Physical Activity A Computed Tomography-Based Simulation of Stair Climbing after Curved Varus Osteotomy for Osteonecrosis of the Femoral Head Focusing on the Non-necrotic Weightbearing Area Oral hypofunction is associated with reduced skeletal muscle mass index in elderly women with end-stage knee osteoarthritis: a clinical assessment adjusted for objectively measured physical activity Evaluation of the use of a pressure-dispersion pad for kneeling after total knee arthroplasty Difference of muscle volume and myosteatosis of lower limb muscles between knee osteoarthritis and hip osteoarthritis: artificial intelligence-based computed tomography analysis Which Cross-Sectional Area of the Lower Leg Muscle on Computed Tomography Reflects Skeletal Muscle Mass Reduction in Patients with Hip Osteoarthritis Most? Comparison of lower limb muscle characteristics, femoral morphology, and bone mineral density between femoral neck and intertrochanteric fractures using AI-based CT analysis CT-Based Navigation Reduces Outliers and Osteotomy Variability in Curved Varus Osteotomy for Osteonecrosis of the Femoral Head: A Retrospective Comparative Study Sex-specific anatomy and when to choose a 32-mm glenosphere in reverse shoulder arthroplasty: a 3D CT simulation and ROC analysis Accuracy and precision of planned glenoid guide-pin placement in reverse shoulder arthroplasty: a cadaveric comparison of fluoroscopy-guided freehand technique, patient-specific instrumentation, and navigation Association Between Oral Function and Postoperative Physical Activity Following Total Hip Arthroplasty: A Prospective Observational Study
L
L. Kaptein, Bart	FURTHER POSTERIOR DWELLING OF THE FEMORAL COMPONENT ON AN MC COMPARED TO A CR BEARING. A FLUOROSCOPIC KINEMATIC ANALYSIS FROM A RANDOMISED CONTROLLED TRIAL
Landgraeber, Stefan	INTER-OBSERVER RELIABILITY DURING INTRA-OPERATIVE PASSIVE KNEE FLEXION: A HUMAN DONOR STUDY Intra-observer repeatability of intra-operative passive knee kinematics – a human donor study
Lankheet, Steven	3D Virtual Surgical Planning and Patient Specific Guide Design for Lapidus Surgery in a Hallux Valgus Patient
Laoruenthana, Artit	ACCURACY OF FEMORAL MECHANICAL AXIS REGISTRATION IN IMAGELESS ROBOTIC- ASSISTED TOTAL KNEE ARTHROPLASTY: A MULTI-CENTER COMPARISON OF THE 5-MM MEDIAL OFFSET AND INTERCONDYLAR NOTCH CENTER
Lau, Ajax Hong-Yin	Mixed Reality Spatial Computing In Orthopaedic Oncology: An experience of 72 cases
Lee, Changhyeon	Design and Evaluation of a Wireless Robotic System for Long-Bone Fracture Reduction
Lee, Do Weon	Robotic-Arm Assisted Bicompartmental Knee Arthroplasty Demonstrates More Physiological Gait Despite Similar Patient-Reported Outcomes Compared With Total Knee Arthroplasty
Lee, Donghyun	ROBOTIC CONTROL OF ALL -IN-ONE SOLUTION FOR KNEE BALANCE AND ALIGNMENT OF PRIMARY TOTAL KNEE ARTHROPLASTY
Lee, Han-Jun	ROBOTIC-ARM ASSISTED TOTAL KNEE ARTHROPLASTY IS ASSOCIATED WITH IMPROVED EARLY FUNCTIONAL RECOVERY COMPARED WITH CONVENTIONAL TOTAL KNEE ARTHROPLASTY Preoperative Patellofemoral Alignment Affects Anterior Knee Pain After Primary Total Knee Arthroplasty Without Patellar Resurfacing
Lee, Hyun-Joo	Design and Evaluation of a Wireless Robotic System for Long-Bone Fracture Reduction
Letissier, Hoel	Intraoperative HMD-Guided Glenoid Pin Placement in Shoulder Arthroplasty: Accuracy, Safe Zone and technical considerations Accuracy and Agreement Between Optical Navigation (NDI Polaris) and Postoperative CT for Glenoid Pin Placement: A Cadaveric Validation Study Using Augmented-Reality guidance
Letissier, Hoel	A Hybrid Physical–Digital Framework for Annotated Fracture Reduction Data Evaluated using Clinically Relevant 3D metrics
Letissier, Hoël	Statistical Pose Model Accurately Reproduces Forearm Pronation-Supination: Cadaveric Validation
Levy, Yoav	From Imaging to Implant Design: A Fully In-Hospital Computer-Assisted Workflow for Large Bone Reconstruction Patient-Specific Ti-6Al-4V Lattice Implants for Critical-Sized, Weight-Bearing Limb Reconstruction: Average 45-months Surgical, Oncological and Functional Follow-up
Li, Shihao	SCAPULOHUMERAL RHYTHM REPRODUCTION USING AN UPPER-LIMB MUSCULOSKELETAL MODEL WITH PHYSICAL SCAPULOTHORACIC CONTACT
Lim, Jihyun	ROBOTIC CONTROL OF ALL -IN-ONE SOLUTION FOR KNEE BALANCE AND ALIGNMENT OF PRIMARY TOTAL KNEE ARTHROPLASTY
Liu, Xiaoli	EVALUATION OF LARGE LANGUAGE MODEL APPLICATIONS IN REVERSE SHOULDER ARTHROPLASTY
Lloyd, John E.	Improving Workflow Efficiency of an Intraoperative Planning and Guidance System for Mandibular Reconstruction Predicted Bone Union Propensity in Mini-Plate-Based Mandibular Reconstruction Surgery is Affected by Bone Cut Geometry
Longo, Basile	A Hybrid Physical–Digital Framework for Annotated Fracture Reduction Data Evaluated using Clinically Relevant 3D metrics Statistical Pose Model Accurately Reproduces Forearm Pronation-Supination: Cadaveric Validation
M
Mae, Hirokazu	Clinical and radiographic outcomes of rotational acetabular osteotomy using CT-based navigation for developmental dysplasia of the hip Side-to-side differences in femoral neck bone mineral density in patients undergoing surgery for adult spinal deformity Comparison of lower limb muscle characteristics, femoral morphology, and bone mineral density between femoral neck and intertrochanteric fractures using AI-based CT analysis Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index
Mae, Hirokazu	Variation and agreement rate in preoperative three-dimensional planning for total hip arthroplasty across hip surgeons Role of Implant Range of Motion in Preventing Recurrent Anterior Dislocation After Revision Total Hip Arthroplasty Automated Multi-Severity Classification and Collapse Risk Prediction of Osteonecrosis of the Femoral Head from MRI: Integrating Deep Learning and Geometric Analysis Effect of skin incision orientation on acetabular cup placement accuracy and precision in anterolateral supine approach total hip arthroplasty using computed tomography-based navigation
Mae, Tomoki	RETROSPECTIVE CT EVALUATION OF PELVIC REFERENCE PINS IN ROBOTIC-ASSISTED AND NAVIGATION-ASSISTED TOTAL HIP ARTHROPLASTY
Maeda, Yuki	RETROSPECTIVE CT EVALUATION OF PELVIC REFERENCE PINS IN ROBOTIC-ASSISTED AND NAVIGATION-ASSISTED TOTAL HIP ARTHROPLASTY
Maguet, Ehouarn	Statistical Pose Model Accurately Reproduces Forearm Pronation-Supination: Cadaveric Validation
Markenstein, Philip Rafael	Automated Conversion of 3D Bone Meshes to NURBS for Patient-Specific Implant Design
Marques Pieck Pires, Alberto	Automated Conversion of 3D Bone Meshes to NURBS for Patient-Specific Implant Design
Masada, Yasutaka	ACCURACY VERIFICATION OF AN AI-BASED NAVIGATION SYSTEM FOR THA IN SEVERE HIP DYSPLASIA: IMPACT OF AUTOMATED SEGMENTATION SPEED AND ILIAC CREST REGISTRATION
Mashima, Naohiko	Three-Dimensional Printing for Intramedullary Pin Fixation in Femoral Diaphyseal Fracture with Osteogenesis Imperfecta: A Case Report A Computed Tomography-Based Simulation of Stair Climbing after Curved Varus Osteotomy for Osteonecrosis of the Femoral Head Focusing on the Non-necrotic Weightbearing Area Association Between Oral Function and Postoperative Physical Activity Following Total Hip Arthroplasty: A Prospective Observational Study
Mashima, Naohiko	CT-Based Navigation Reduces Outliers and Osteotomy Variability in Curved Varus Osteotomy for Osteonecrosis of the Femoral Head: A Retrospective Comparative Study
Matsuda, Shuichi	3D CT Volume Reconstruction from a Single Intraoperative Hip Fluoroscopy Image
Matsuki, Yuta	Comparing clinical and radiological outcomes for a three-dimensional printed highly porous cup and a hydroxyapatite-coated non-highly porous cup in computed tomography–navigated total hip arthroplasty using propensity score matching Accuracy of Acetabular Cup Placement Using the CT-Based Navigation System Ortoma Treatment Solution in Total Hip Arthroplasty
Matsumine, Akihiko	Effect of skin incision orientation on acetabular cup placement accuracy and precision in anterolateral supine approach total hip arthroplasty using computed tomography-based navigation
Matsumoto, Masashi	Comprehensive Gait Evaluation in Patients With Knee Osteoarthritis: Assessment Using a Smartphone-Based Markerless Motion Capture System
Matsumoto, Shin	ACCURACY VERIFICATION OF AN AI-BASED NAVIGATION SYSTEM FOR THA IN SEVERE HIP DYSPLASIA: IMPACT OF AUTOMATED SEGMENTATION SPEED AND ILIAC CREST REGISTRATION
Matsumoto, Tomoyuki	Comparison of Implant Positioning Accuracy Between Mako and ROSA Robotic-Assisted Total Knee Arthroplasty Using Three-Dimensional CT Analysis
Matsuyama, Yukihiro	Investigation of the Opening Gap Required to Preserve Posterior Tibial Slope According to the Sagittal Anterior–Posterior Inclination of the Osteotomy Plane in Medial Open-Wedge High Tibial Osteotomy
Meesters, Anne	Correction Osteotomies with 3D Guides: Does Surgical Experience Affect Operative Accuracy?
Mende, Emily	Improving Workflow Efficiency of an Intraoperative Planning and Guidance System for Mandibular Reconstruction A Planar Probe More Repeatably Measures Bone Cut Planes than Stylus-Based Digitization
Merose, Omri	Novel Automated Sub-Segmentation Tool for Quantification of Tumor Features in Soft-Tissue Sarcoma of the Thigh Patient-Specific Ti-6Al-4V Lattice Implants for Critical-Sized, Weight-Bearing Limb Reconstruction: Average 45-months Surgical, Oncological and Functional Follow-up
Mimura, Tetsuhiko	Impact of osteosclerosis on cervical pedicle screw insertion using preoperative CT-based navigation
Misaki, Hiroshi	Clinical Outcomes of Full-Endoscopic Foraminotomy Assisted by O-arm Navigation for Cervical Radiculopathy Feasibility of 3D-Printed Rigid Spinal Orthoses Using Patient Scan Data Strategic Approach in Full-Endoscopic Spine Surgery: Bilateral Contralateral Laminoplasty (FE-BCL) to Preserve Posterior Stabilizing Structures Regardless of Anatomical Variations
Mishima, Hajime	Optimizing Stem Length in Conversion Total Hip Arthroplasty After Intertrochanteric Fracture: A Finite Element Analysis
Miyake, Tasuku	Cartilage Visualization on Dual-Energy CT Using Optimized Material Pairing
Miyamura, Satoshi	Progressive Whole-Joint Stabilization Driven by Early Morphological Remodeling and Surgical Restoration of Biomechanics in Growing Patients With Capitellar Osteochondritis Dissecans Cartilage Visualization on Dual-Energy CT Using Optimized Material Pairing
Miyoshi, Yuji	Progressive Whole-Joint Stabilization Driven by Early Morphological Remodeling and Surgical Restoration of Biomechanics in Growing Patients With Capitellar Osteochondritis Dissecans
Morikawa, Ken	Three-dimensional Computed Tomography Based Preoperative Simulation for Intramedullary Nailing of Distal Tibial Fractures; Both Reduction and Implanting Simulation
Morita, Hiroyuki	POSTOPERATIVE SPORT-INCLUSIVE ACTIVITY AFTER COMPUTER-ASSISTED TOTAL HIP ARTHROPLASTY: ASSOCIATION WITH CUP PLACEMENT ACCURACY AND CENTER OF ROTATION REPRODUCIBILITY Influence of Three-Dimensional Hip Parameters Change on Lower Limb Kinematics and Kinetics During Gait Following Total Hip Arthroplasty Femoral Stem Alignment and Post-operative Patient Satisfaction in Total Hip Arthroplasty Using Computer-Assisted Equipment
Morita, Yugo	3D CT Volume Reconstruction from a Single Intraoperative Hip Fluoroscopy Image
Moriya, Michiru	Augmented Reality Using Smartphones for Total Knee Arthroplasty
Moro, Ashvin	Accurate Guidewire Placement for Scaphoid Fracture Fixation Using Biplanar X-Rays
Mosheiff, Ram	Use of Custom 3D-Printed Titanium Implants for Partial Joint Resurfacing Following Traumatic Injuries: A Preliminary Report
Muharemovic, Omar	FURTHER POSTERIOR DWELLING OF THE FEMORAL COMPONENT ON AN MC COMPARED TO A CR BEARING. A FLUOROSCOPIC KINEMATIC ANALYSIS FROM A RANDOMISED CONTROLLED TRIAL
Mulpuri, Kishore	Advancing a Tracked 2D Ultrasound System for Assessing Dysplasia Metrics Towards Clinical Deployment
Murakami, Hideki	Treatment for malignant bone tumor with patient’ specific cutting guide
Murakami, Yusuke	Clinical Outcomes of Full-Endoscopic Foraminotomy Assisted by O-arm Navigation for Cervical Radiculopathy Feasibility of 3D-Printed Rigid Spinal Orthoses Using Patient Scan Data Strategic Approach in Full-Endoscopic Spine Surgery: Bilateral Contralateral Laminoplasty (FE-BCL) to Preserve Posterior Stabilizing Structures Regardless of Anatomical Variations
Muramatsu, Toshiki	Optimizing Stem Length in Conversion Total Hip Arthroplasty After Intertrochanteric Fracture: A Finite Element Analysis
Murase, Tsuyosi	Progressive Whole-Joint Stabilization Driven by Early Morphological Remodeling and Surgical Restoration of Biomechanics in Growing Patients With Capitellar Osteochondritis Dissecans Cartilage Visualization on Dual-Energy CT Using Optimized Material Pairing
Murdock, Liam	Improving Workflow Efficiency of an Intraoperative Planning and Guidance System for Mandibular Reconstruction A Planar Probe More Repeatably Measures Bone Cut Planes than Stylus-Based Digitization
Mustaan, Harun	Analysis of safe zones for anterior overhang and cup coverage
N
Naito, Yohei	CLINICAL OUTCOMES AND SOFT TISSUE LAXITY AFTER ROBOT-ASSISTED FUNCTIONALLY AND MECHANICALLY ALIGNED TOTAL KNEE ARTHROPLASTY COMPARISON OF ACCURACY OF CUP POSITION IN TOTAL HIP ARTHROPLASTY USING NAVBIT SPRINT AND AR-BASED CT NAVIGATION
Naito, Yohei	ACCURACY OF IMPLANT PLACEMENT IN ROBOTIC-ASSISTED UNICOMPARTMENTAL KNEE ARTHROPLASTY USING THE CORI SYSTEM COMPARISON OF ACETABULAR CUP PLACEMENT BETWEEN CT-BASED AND PINLESS PORTABLE NAVIGATION SYSTEMS USING AUGMENTED REALITY IN TOTAL HIP ARTHROPLASTY Factors influencing patient-reported outcome measures two years after handheld robotic assisted bi-cruciate stabilized total knee arthroplasty
Naji, Omar	Impact of Demographic, Implant, and Intraoperative Planning Parameters on 2-Year Outcomes in Navigation-Assisted Tibia-First Total Knee Arthroplasty: A Descriptive Study
Nakahara, Ema	TOTAL HIP ARTHROPLASTY FOR ANKYLOSED HIP USING A THREE-DIMENSIONAL PRINTED MODEL AND CT-BASED NAVIGATION: A CASE REPORT Symptom Duration–Related Muscle Atrophy And Fatty Degeneration Around The Hip Joint In Unilateral Hip Osteoarthritis: An AI-Based Imaging Study
Nakajima, Hideaki	Effect of skin incision orientation on acetabular cup placement accuracy and precision in anterolateral supine approach total hip arthroplasty using computed tomography-based navigation
Nakamae, Atsuo	Comparative analysis of intraoperative kinematics among different total knee arthroplasty designs: Can we restore medial pivot and eliminate anterior paradoxical motion?
Nakamura, Nobuo	Role of Implant Range of Motion in Preventing Recurrent Anterior Dislocation After Revision Total Hip Arthroplasty
Nakano, Naoki	Comparison of Implant Positioning Accuracy Between Mako and ROSA Robotic-Assisted Total Knee Arthroplasty Using Three-Dimensional CT Analysis
Nakao, Megumi	3D CT Volume Reconstruction from a Single Intraoperative Hip Fluoroscopy Image
Nakasone, Satoshi	Evaluation of bilateral symmetry of periacetabular morphology without reference to the femoral head on CT axial images CIRCUMFERENTIAL ANALYSIS OF ILIOPSOAS IMPINGEMENT RISK USING AI-BASED MUSCLE SEGMENTATION AND THE RADAR CHART METHOD: A CUP PLACEMENT SIMULATION STUDY
Nakata, Kyohei	Comparative analysis of intraoperative kinematics among different total knee arthroplasty designs: Can we restore medial pivot and eliminate anterior paradoxical motion?
Nakayama, Naoto	POSTOPERATIVE SPORT-INCLUSIVE ACTIVITY AFTER COMPUTER-ASSISTED TOTAL HIP ARTHROPLASTY: ASSOCIATION WITH CUP PLACEMENT ACCURACY AND CENTER OF ROTATION REPRODUCIBILITY Influence of Three-Dimensional Hip Parameters Change on Lower Limb Kinematics and Kinetics During Gait Following Total Hip Arthroplasty Femoral Stem Alignment and Post-operative Patient Satisfaction in Total Hip Arthroplasty Using Computer-Assisted Equipment
Nekomoto, Akinori	Comparative analysis of intraoperative kinematics among different total knee arthroplasty designs: Can we restore medial pivot and eliminate anterior paradoxical motion?
Nellensteijn, Jorm	Using A Novel Patient-Specific Guide with Radiopaque Alignment for Sacroiliac Joint Fusion: A Case Series Innovative Technique for Less Invasive Revision of Cemented Total Hip Arthroplasty with Patient Specific Surgical Guides
Nishida, Kotaro	Evaluation of bilateral symmetry of periacetabular morphology without reference to the femoral head on CT axial images CIRCUMFERENTIAL ANALYSIS OF ILIOPSOAS IMPINGEMENT RISK USING AI-BASED MUSCLE SEGMENTATION AND THE RADAR CHART METHOD: A CUP PLACEMENT SIMULATION STUDY
Nishimura, Ryosuke	A Computed Tomography-Based Simulation of Stair Climbing after Curved Varus Osteotomy for Osteonecrosis of the Femoral Head Focusing on the Non-necrotic Weightbearing Area Difference of muscle volume and myosteatosis of lower limb muscles between knee osteoarthritis and hip osteoarthritis: artificial intelligence-based computed tomography analysis Which Cross-Sectional Area of the Lower Leg Muscle on Computed Tomography Reflects Skeletal Muscle Mass Reduction in Patients with Hip Osteoarthritis Most? CT-Based Navigation Reduces Outliers and Osteotomy Variability in Curved Varus Osteotomy for Osteonecrosis of the Femoral Head: A Retrospective Comparative Study Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index Association Between Oral Function and Postoperative Physical Activity Following Total Hip Arthroplasty: A Prospective Observational Study
Nishino, Tomofumi	Optimizing Stem Length in Conversion Total Hip Arthroplasty After Intertrochanteric Fracture: A Finite Element Analysis
Numa, Masahiro	Comparing clinical and radiological outcomes for a three-dimensional printed highly porous cup and a hydroxyapatite-coated non-highly porous cup in computed tomography–navigated total hip arthroplasty using propensity score matching
Numa, Masahiro	Accuracy of Acetabular Cup Placement Using the CT-Based Navigation System Ortoma Treatment Solution in Total Hip Arthroplasty
O
Oba, Hiroki	Impact of osteosclerosis on cervical pedicle screw insertion using preoperative CT-based navigation
Ogawa, Hiroyuki	A Smartphone-Based Augmented Reality–Aided Navigation System for Knee Arthroplasty Case reports of robotic-assisted hip arthroplasty after wide excision of pubic chondrosarcoma in the anterolateral approach. A SMARTPHONE-BASED AUGMENTED REALITY NAVIGATION SYSTEM FOR HIP ARTHROPLASTY
Ogawa, Takeshi	TOTAL HIP ARTHROPLASTY FOR ANKYLOSED HIP USING A THREE-DIMENSIONAL PRINTED MODEL AND CT-BASED NAVIGATION: A CASE REPORT Symptom Duration–Related Muscle Atrophy And Fatty Degeneration Around The Hip Joint In Unilateral Hip Osteoarthritis: An AI-Based Imaging Study RETROSPECTIVE CT EVALUATION OF PELVIC REFERENCE PINS IN ROBOTIC-ASSISTED AND NAVIGATION-ASSISTED TOTAL HIP ARTHROPLASTY
Ogura, Izumi	Automated Segmentation of the Sacral Canal for Large-Scale Analysis of Demographic, Densitometric and Morphometric Sacral Measurements in CT Images
Oh, Chang-Wug	Design and Evaluation of a Wireless Robotic System for Long-Bone Fracture Reduction
Oka, Kunihiro	Progressive Whole-Joint Stabilization Driven by Early Morphological Remodeling and Surgical Restoration of Biomechanics in Growing Patients With Capitellar Osteochondritis Dissecans Cartilage Visualization on Dual-Energy CT Using Optimized Material Pairing Depthmap-based 2D–3D Reconstruction of the Carpal Bones from a Single-View Radiograph for Deformity Diagnosis and Treatment Planning
Okada, Seiji	Variation and agreement rate in preoperative three-dimensional planning for total hip arthroplasty across hip surgeons Role of Implant Range of Motion in Preventing Recurrent Anterior Dislocation After Revision Total Hip Arthroplasty Progressive Whole-Joint Stabilization Driven by Early Morphological Remodeling and Surgical Restoration of Biomechanics in Growing Patients With Capitellar Osteochondritis Dissecans Cartilage Visualization on Dual-Energy CT Using Optimized Material Pairing Automated Multi-Severity Classification and Collapse Risk Prediction of Osteonecrosis of the Femoral Head from MRI: Integrating Deep Learning and Geometric Analysis Side-to-side differences in femoral neck bone mineral density in patients undergoing surgery for adult spinal deformity Automated Laminectomy Using Collaborative Robot: Concept Verification Comparison of lower limb muscle characteristics, femoral morphology, and bone mineral density between femoral neck and intertrochanteric fractures using AI-based CT analysis Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index
Okada, Seiji	Lumbar volumetric Bone Mineral Density Estimation from A Plain X-ray via Generation of BMD Distribution Maps.
Okazaki, Tomoya	Comparing clinical and radiological outcomes for a three-dimensional printed highly porous cup and a hydroxyapatite-coated non-highly porous cup in computed tomography–navigated total hip arthroplasty using propensity score matching
Okuda, Ryuichiro	ACCURACY VERIFICATION OF AN AI-BASED NAVIGATION SYSTEM FOR THA IN SEVERE HIP DYSPLASIA: IMPACT OF AUTOMATED SEGMENTATION SPEED AND ILIAC CREST REGISTRATION
Okuno, Yasushi	3D CT Volume Reconstruction from a Single Intraoperative Hip Fluoroscopy Image
Okuzu, Yaichiro	3D CT Volume Reconstruction from a Single Intraoperative Hip Fluoroscopy Image
Olde Heuvel, Judith	Leg alignment normal values of a 2D framework might not be valid for a consensus-based 3D framework
Oldhoff, Miriam	Biomechanical and Computational Validation of PatientSpecific Implants for Schatzker IV Tibial Plateau Fractures
Omae, Hiromichi	Does Intraoperative Navigation Facilitate Accurate Screw Placement According to Preoperative Planning in Reverse Total Shoulder Arthroplasty?
Orito, Ryo	TOTAL HIP ARTHROPLASTY FOR ANKYLOSED HIP USING A THREE-DIMENSIONAL PRINTED MODEL AND CT-BASED NAVIGATION: A CASE REPORT Symptom Duration–Related Muscle Atrophy And Fatty Degeneration Around The Hip Joint In Unilateral Hip Osteoarthritis: An AI-Based Imaging Study RETROSPECTIVE CT EVALUATION OF PELVIC REFERENCE PINS IN ROBOTIC-ASSISTED AND NAVIGATION-ASSISTED TOTAL HIP ARTHROPLASTY
Osawa, Yusuke	Clinical outcomes of navigation assisted transtrochanteric rotational osteotomy for osteonecrosis of the head
Otake, Yoshito	Symptom Duration–Related Muscle Atrophy And Fatty Degeneration Around The Hip Joint In Unilateral Hip Osteoarthritis: An AI-Based Imaging Study Construction of Statistical Shape Models for Lumbar Vertebrae and Femur from QCT Images and Analysis of Age-Related Changes in Bone Quality Parameters Depthmap-based 2D–3D Reconstruction of the Carpal Bones from a Single-View Radiograph for Deformity Diagnosis and Treatment Planning Lumbar volumetric Bone Mineral Density Estimation from A Plain X-ray via Generation of BMD Distribution Maps. Automated Multi-Severity Classification and Collapse Risk Prediction of Osteonecrosis of the Femoral Head from MRI: Integrating Deep Learning and Geometric Analysis Difference of muscle volume and myosteatosis of lower limb muscles between knee osteoarthritis and hip osteoarthritis: artificial intelligence-based computed tomography analysis Which Cross-Sectional Area of the Lower Leg Muscle on Computed Tomography Reflects Skeletal Muscle Mass Reduction in Patients with Hip Osteoarthritis Most? Side-to-side differences in femoral neck bone mineral density in patients undergoing surgery for adult spinal deformity Comparison of lower limb muscle characteristics, femoral morphology, and bone mineral density between femoral neck and intertrochanteric fractures using AI-based CT analysis CIRCUMFERENTIAL ANALYSIS OF ILIOPSOAS IMPINGEMENT RISK USING AI-BASED MUSCLE SEGMENTATION AND THE RADAR CHART METHOD: A CUP PLACEMENT SIMULATION STUDY Automated Segmentation of the Sacral Canal for Large-Scale Analysis of Demographic, Densitometric and Morphometric Sacral Measurements in CT Images Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index
Otsuki, Kenta	Evaluation of bilateral symmetry of periacetabular morphology without reference to the femoral head on CT axial images CIRCUMFERENTIAL ANALYSIS OF ILIOPSOAS IMPINGEMENT RISK USING AI-BASED MUSCLE SEGMENTATION AND THE RADAR CHART METHOD: A CUP PLACEMENT SIMULATION STUDY
Ozaki, Toshifumi	ACCURACY VERIFICATION OF AN AI-BASED NAVIGATION SYSTEM FOR THA IN SEVERE HIP DYSPLASIA: IMPACT OF AUTOMATED SEGMENTATION SPEED AND ILIAC CREST REGISTRATION
P
Pansky, Mor	From Imaging to Implant Design: A Fully In-Hospital Computer-Assisted Workflow for Large Bone Reconstruction
Park, Cheol Hee	MID-FLEXION LAXITY COULD BE IDENTIFIED WITH CONTINUOUS FLEXION-ARC GAP ASSESSMENT IN PATIENTS WITH A LARGE PREOPERATIVE CONVERGENCE ANGLE.
Park, Hyunwoo	ACCESSIBLE SARCOPENIA SCREENING VIA MUSCLE VOLUME ESTIMATION FROM THREE-VIEW LONG-LENGTH LOWER-EXTREMITY RADIOGRAPHS
Park, Il-Hyung	Design and Evaluation of a Wireless Robotic System for Long-Bone Fracture Reduction
Park, Juntae	Design and Evaluation of a Wireless Robotic System for Long-Bone Fracture Reduction
Pelobello, Fernan Frans B.	Automated Segmentation of the Sacral Canal for Large-Scale Analysis of Demographic, Densitometric and Morphometric Sacral Measurements in CT Images
Piwowarczyk, Jakub	Advancing a Tracked 2D Ultrasound System for Assessing Dysplasia Metrics Towards Clinical Deployment
Ploynumpon, Patcharavit	COMPARISON OF FEMORAL COMPONENT ROTATION BETWEEN FUNCTIONAL ALIGNMENT VERSUS MECHANICAL ALIGNMENT IN BILATERAL TOTAL KNEE ARTHROPLASTY: A PROSPECTIVE RANDOMIZED CONTROLLED TRIAL Comparison of Radiologic and Clinical Outcomes of the Patella in Restricted Kinematic Alignment and Mechanical Alignment in Bilateral Robotic Total Knee Arthroplasty: A Randomized Controlled Trial
Polakovic, Sandrine	Learning Curve for rTSA Navigation Procedure With a Single System - A Large Scale Study
Prisman, Eitan	Improving Workflow Efficiency of an Intraoperative Planning and Guidance System for Mandibular Reconstruction A Planar Probe More Repeatably Measures Bone Cut Planes than Stylus-Based Digitization Predicted Bone Union Propensity in Mini-Plate-Based Mandibular Reconstruction Surgery is Affected by Bone Cut Geometry
R
R. L. Mortensen, Kristian	FURTHER POSTERIOR DWELLING OF THE FEMORAL COMPONENT ON AN MC COMPARED TO A CR BEARING. A FLUOROSCOPIC KINEMATIC ANALYSIS FROM A RANDOMISED CONTROLLED TRIAL
Radermacher, Klaus	Literature review as a basis for psoas syndrome risk management in THA Patient-specific biomechanical analysis of the tibiofemoral tipping point in owHTO Analysis of safe zones for anterior overhang and cup coverage Analysis of inter-individual morphological variability in owHTO patients
Renaudot, Raphael	INTER-OBSERVER RELIABILITY DURING INTRA-OPERATIVE PASSIVE KNEE FLEXION: A HUMAN DONOR STUDY Intra-observer repeatability of intra-operative passive knee kinematics – a human donor study
Romem, Roy	Intraoperative Accuracy of Computer-Assisted Navigation for Treatment of Glenoids with Augmented Glenoid Components in Total Shoulder Arthroplasty
S
S. Andersen, Michael	FURTHER POSTERIOR DWELLING OF THE FEMORAL COMPONENT ON AN MC COMPARED TO A CR BEARING. A FLUOROSCOPIC KINEMATIC ANALYSIS FROM A RANDOMISED CONTROLLED TRIAL
Sahasoonthorn, Kamonnop	Comparison of Radiologic and Clinical Outcomes of the Patella in Restricted Kinematic Alignment and Mechanical Alignment in Bilateral Robotic Total Knee Arthroplasty: A Randomized Controlled Trial
Sainath, Shreyas	3D Geometric Articular Surface Analysis of the Wrist for Implant Design
Saito, Masayoshi	A Smartphone-Based Augmented Reality–Aided Navigation System for Knee Arthroplasty Case reports of robotic-assisted hip arthroplasty after wide excision of pubic chondrosarcoma in the anterolateral approach. Computer Navigation–Assisted Osteochondroplasty Improves Achievement of Preoperative Cam Resection Plans in Femoroacetabular Impingement A SMARTPHONE-BASED AUGMENTED REALITY NAVIGATION SYSTEM FOR HIP ARTHROPLASTY
Sakai, Shinichiro	Three-Dimensional Printing for Intramedullary Pin Fixation in Femoral Diaphyseal Fracture with Osteogenesis Imperfecta: A Case Report A Computed Tomography-Based Simulation of Stair Climbing after Curved Varus Osteotomy for Osteonecrosis of the Femoral Head Focusing on the Non-necrotic Weightbearing Area
Sakai, Takao	Treatment for malignant bone tumor with patient’ specific cutting guide
Sakai, Takashi	Comparing clinical and radiological outcomes for a three-dimensional printed highly porous cup and a hydroxyapatite-coated non-highly porous cup in computed tomography–navigated total hip arthroplasty using propensity score matching Accuracy of Acetabular Cup Placement Using the CT-Based Navigation System Ortoma Treatment Solution in Total Hip Arthroplasty
Sakamoto, Masaya	Variation and agreement rate in preoperative three-dimensional planning for total hip arthroplasty across hip surgeons
Sanchez-Sotelo, Joaquin	Intraoperative HMD-Guided Glenoid Pin Placement in Shoulder Arthroplasty: Accuracy, Safe Zone and technical considerations
Sasaki, Kei	Comparing clinical and radiological outcomes for a three-dimensional printed highly porous cup and a hydroxyapatite-coated non-highly porous cup in computed tomography–navigated total hip arthroplasty using propensity score matching
Sasaki, Kei	Accuracy of Acetabular Cup Placement Using the CT-Based Navigation System Ortoma Treatment Solution in Total Hip Arthroplasty
Sasaki, Satoshi	RETROSPECTIVE CT EVALUATION OF PELVIC REFERENCE PINS IN ROBOTIC-ASSISTED AND NAVIGATION-ASSISTED TOTAL HIP ARTHROPLASTY
Sasao, Shinji	Impact of osteosclerosis on cervical pedicle screw insertion using preoperative CT-based navigation
Sato, Yoshinobu	Construction of Statistical Shape Models for Lumbar Vertebrae and Femur from QCT Images and Analysis of Age-Related Changes in Bone Quality Parameters Depthmap-based 2D–3D Reconstruction of the Carpal Bones from a Single-View Radiograph for Deformity Diagnosis and Treatment Planning Automated Multi-Severity Classification and Collapse Risk Prediction of Osteonecrosis of the Femoral Head from MRI: Integrating Deep Learning and Geometric Analysis Difference of muscle volume and myosteatosis of lower limb muscles between knee osteoarthritis and hip osteoarthritis: artificial intelligence-based computed tomography analysis Side-to-side differences in femoral neck bone mineral density in patients undergoing surgery for adult spinal deformity Automated Segmentation of the Sacral Canal for Large-Scale Analysis of Demographic, Densitometric and Morphometric Sacral Measurements in CT Images
Sato, Yoshinobu	Lumbar volumetric Bone Mineral Density Estimation from A Plain X-ray via Generation of BMD Distribution Maps.
Sato, Yuhi	Construction of an Online Surgical Training System Using Omnidirectional Video Streaming
Sauer, Adrian	INTER-OBSERVER RELIABILITY DURING INTRA-OPERATIVE PASSIVE KNEE FLEXION: A HUMAN DONOR STUDY Intra-observer repeatability of intra-operative passive knee kinematics – a human donor study
Savard, Alix	Advancing a Tracked 2D Ultrasound System for Assessing Dysplasia Metrics Towards Clinical Deployment
Schaeffer, Emily	Advancing a Tracked 2D Ultrasound System for Assessing Dysplasia Metrics Towards Clinical Deployment
Schierjott, Ronja A.	INTER-OBSERVER RELIABILITY DURING INTRA-OPERATIVE PASSIVE KNEE FLEXION: A HUMAN DONOR STUDY Intra-observer repeatability of intra-operative passive knee kinematics – a human donor study
Schoch, Bradley S.	Learning Curve for rTSA Navigation Procedure With a Single System - A Large Scale Study
Schreurs, Ruud	An automated Statistical Shape Model workflow of the Craniomaxillofacial Complex for Shape Reconstruction
Schröder, Femke	Using A Novel Patient-Specific Guide with Radiopaque Alignment for Sacroiliac Joint Fusion: A Case Series Innovative Technique for Less Invasive Revision of Cemented Total Hip Arthroplasty with Patient Specific Surgical Guides
Schröder, Femke	Predicting Plantar Pressure from Non-Weight-Bearing MRI Using a Finite Element Model 3D Virtual Surgical Planning and Patient Specific Guide Design for Lapidus Surgery in a Hallux Valgus Patient
Seal, Alexander	Accurate Guidewire Placement for Scaphoid Fracture Fixation Using Biplanar X-Rays
Segal, Ortal	Novel Automated Sub-Segmentation Tool for Quantification of Tumor Features in Soft-Tissue Sarcoma of the Thigh From Imaging to Implant Design: A Fully In-Hospital Computer-Assisted Workflow for Large Bone Reconstruction Patient-Specific Ti-6Al-4V Lattice Implants for Critical-Sized, Weight-Bearing Limb Reconstruction: Average 45-months Surgical, Oncological and Functional Follow-up
Segev-Steinbuch, Lior	Novel Automated Sub-Segmentation Tool for Quantification of Tumor Features in Soft-Tissue Sarcoma of the Thigh
Sekiya, Dai	Comprehensive Gait Evaluation in Patients With Knee Osteoarthritis: Assessment Using a Smartphone-Based Markerless Motion Capture System
Sharabi, Netanel	Patient-Specific Ti-6Al-4V Lattice Implants for Critical-Sized, Weight-Bearing Limb Reconstruction: Average 45-months Surgical, Oncological and Functional Follow-up
Shibanuma, Nao	Comparison of Implant Positioning Accuracy Between Mako and ROSA Robotic-Assisted Total Knee Arthroplasty Using Three-Dimensional CT Analysis
Shibuta, Yuutaro	Navigation accuracy according to cup geometry and fixation method in total hip arthroplasty
Shimada, Kozo	Progressive Whole-Joint Stabilization Driven by Early Morphological Remodeling and Surgical Restoration of Biomechanics in Growing Patients With Capitellar Osteochondritis Dissecans
Shimasaki, Koshiro	Optimizing Stem Length in Conversion Total Hip Arthroplasty After Intertrochanteric Fracture: A Finite Element Analysis
Shimono, Katsuhiro	Sex-specific anatomy and when to choose a 32-mm glenosphere in reverse shoulder arthroplasty: a 3D CT simulation and ROC analysis Accuracy and precision of planned glenoid guide-pin placement in reverse shoulder arthroplasty: a cadaveric comparison of fluoroscopy-guided freehand technique, patient-specific instrumentation, and navigation
Shinyashiki, Kei	Automated Laminectomy Using Collaborative Robot: Concept Verification
Shiode, Ryoya	Progressive Whole-Joint Stabilization Driven by Early Morphological Remodeling and Surgical Restoration of Biomechanics in Growing Patients With Capitellar Osteochondritis Dissecans Cartilage Visualization on Dual-Energy CT Using Optimized Material Pairing Depthmap-based 2D–3D Reconstruction of the Carpal Bones from a Single-View Radiograph for Deformity Diagnosis and Treatment Planning
Shivam, Bhola	ASSOCIATION OF PLASMA PROTEOMIC SIGNATURES WITH THIGH MUSCLE ADIPOSITY
Shoji, Takeshi	POSTOPERATIVE SPORT-INCLUSIVE ACTIVITY AFTER COMPUTER-ASSISTED TOTAL HIP ARTHROPLASTY: ASSOCIATION WITH CUP PLACEMENT ACCURACY AND CENTER OF ROTATION REPRODUCIBILITY Influence of Three-Dimensional Hip Parameters Change on Lower Limb Kinematics and Kinetics During Gait Following Total Hip Arthroplasty Femoral Stem Alignment and Post-operative Patient Satisfaction in Total Hip Arthroplasty Using Computer-Assisted Equipment
Sijbers, Jan	Accurate prediction of 3D forearm shape from simple measurements
So, Kazutaka	3D CT Volume Reconstruction from a Single Intraoperative Hip Fluoroscopy Image
Song, Eunkyoo	ROBOTIC CONTROL OF ALL -IN-ONE SOLUTION FOR KNEE BALANCE AND ALIGNMENT OF PRIMARY TOTAL KNEE ARTHROPLASTY
Song, Sang Jun	MID-FLEXION LAXITY COULD BE IDENTIFIED WITH CONTINUOUS FLEXION-ARC GAP ASSESSMENT IN PATIENTS WITH A LARGE PREOPERATIVE CONVERGENCE ANGLE.
Soufi, Mazen	Construction of Statistical Shape Models for Lumbar Vertebrae and Femur from QCT Images and Analysis of Age-Related Changes in Bone Quality Parameters Depthmap-based 2D–3D Reconstruction of the Carpal Bones from a Single-View Radiograph for Deformity Diagnosis and Treatment Planning Which Cross-Sectional Area of the Lower Leg Muscle on Computed Tomography Reflects Skeletal Muscle Mass Reduction in Patients with Hip Osteoarthritis Most? Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index
Soufi, Mazen	Lumbar volumetric Bone Mineral Density Estimation from A Plain X-ray via Generation of BMD Distribution Maps.
Soufi, Mazen	Difference of muscle volume and myosteatosis of lower limb muscles between knee osteoarthritis and hip osteoarthritis: artificial intelligence-based computed tomography analysis Automated Segmentation of the Sacral Canal for Large-Scale Analysis of Demographic, Densitometric and Morphometric Sacral Measurements in CT Images
Sternheim, Amir	Novel Automated Sub-Segmentation Tool for Quantification of Tumor Features in Soft-Tissue Sarcoma of the Thigh Patient-Specific Ti-6Al-4V Lattice Implants for Critical-Sized, Weight-Bearing Limb Reconstruction: Average 45-months Surgical, Oncological and Functional Follow-up
Sthavorn, Phatrapol	Levels of constraint affect functional outcome of femoral sleeve in revision total knee arthroplasty
Stindel, Eric	3D Reconstruction from Arthroscopic Images using NeRF: a preliminary in-silico study
Sugano, Nobuhiko	RETROSPECTIVE CT EVALUATION OF PELVIC REFERENCE PINS IN ROBOTIC-ASSISTED AND NAVIGATION-ASSISTED TOTAL HIP ARTHROPLASTY
Sugano, Nobuhiko	Role of Implant Range of Motion in Preventing Recurrent Anterior Dislocation After Revision Total Hip Arthroplasty Clinical and radiographic outcomes of rotational acetabular osteotomy using CT-based navigation for developmental dysplasia of the hip Automated Multi-Severity Classification and Collapse Risk Prediction of Osteonecrosis of the Femoral Head from MRI: Integrating Deep Learning and Geometric Analysis
Sugano, Nobuhiko	Lumbar volumetric Bone Mineral Density Estimation from A Plain X-ray via Generation of BMD Distribution Maps.
Sugita, Naohiko	SCAPULOHUMERAL RHYTHM REPRODUCTION USING AN UPPER-LIMB MUSCULOSKELETAL MODEL WITH PHYSICAL SCAPULOTHORACIC CONTACT
Sumi, Kosuke	Accuracy of Dual Mobility Cement Cup Placement Using Augmented Reality Navigation in Hip Arthroplasty for Complex Acetabular Reconstruction Surgery
Suwannikkakun, Saharat	Robotic-Assisted Versus Conventional Total Knee Arthroplasty: Differences in Posterior Cruciate Ligament Release Rates in Cruciate-Retaining Designs
Suzuki, Kento	Oral hypofunction is associated with reduced skeletal muscle mass index in elderly women with end-stage knee osteoarthritis: a clinical assessment adjusted for objectively measured physical activity Association Between Oral Function and Postoperative Physical Activity Following Total Hip Arthroplasty: A Prospective Observational Study
Sze, Louis Kwan-Yik	Mixed Reality Spatial Computing In Orthopaedic Oncology: An experience of 72 cases
T
Taguchi, Yuka	Three-dimensional Relationship Between the Obturator Externus Footprint and the Proximal Femoral Axis.
Tahrat, Yanis	Depthmap-based 2D–3D Reconstruction of the Carpal Bones from a Single-View Radiograph for Deformity Diagnosis and Treatment Planning Automated Segmentation of the Sacral Canal for Large-Scale Analysis of Demographic, Densitometric and Morphometric Sacral Measurements in CT Images
Tajima, Yuichi	Feasibility of 3D-Printed Rigid Spinal Orthoses Using Patient Scan Data Strategic Approach in Full-Endoscopic Spine Surgery: Bilateral Contralateral Laminoplasty (FE-BCL) to Preserve Posterior Stabilizing Structures Regardless of Anatomical Variations
Takada, Kosuke	ACCURACY OF IMPLANT PLACEMENT IN ROBOTIC-ASSISTED UNICOMPARTMENTAL KNEE ARTHROPLASTY USING THE CORI SYSTEM
Takaesu, Mika	CIRCUMFERENTIAL ANALYSIS OF ILIOPSOAS IMPINGEMENT RISK USING AI-BASED MUSCLE SEGMENTATION AND THE RADAR CHART METHOD: A CUP PLACEMENT SIMULATION STUDY
Takaesu, Mika	Evaluation of bilateral symmetry of periacetabular morphology without reference to the femoral head on CT axial images
Takahashi, Jun	Impact of osteosclerosis on cervical pedicle screw insertion using preoperative CT-based navigation
Takao, Masaki	Comprehensive Gait Evaluation in Patients With Knee Osteoarthritis: Assessment Using a Smartphone-Based Markerless Motion Capture System Three-Dimensional Printing for Intramedullary Pin Fixation in Femoral Diaphyseal Fracture with Osteogenesis Imperfecta: A Case Report Preoperative Determinants of Patient Satisfaction in End-Stage Knee Osteoarthritis: A Focus on Pain Catastrophizing and Daily Physical Activity Clinical Outcomes of Full-Endoscopic Foraminotomy Assisted by O-arm Navigation for Cervical Radiculopathy A Computed Tomography-Based Simulation of Stair Climbing after Curved Varus Osteotomy for Osteonecrosis of the Femoral Head Focusing on the Non-necrotic Weightbearing Area Oral hypofunction is associated with reduced skeletal muscle mass index in elderly women with end-stage knee osteoarthritis: a clinical assessment adjusted for objectively measured physical activity Evaluation of the use of a pressure-dispersion pad for kneeling after total knee arthroplasty Selection of Intraoperative Navigation System type in Bone Tumor Surgery Difference of muscle volume and myosteatosis of lower limb muscles between knee osteoarthritis and hip osteoarthritis: artificial intelligence-based computed tomography analysis Which Cross-Sectional Area of the Lower Leg Muscle on Computed Tomography Reflects Skeletal Muscle Mass Reduction in Patients with Hip Osteoarthritis Most? Feasibility of 3D-Printed Rigid Spinal Orthoses Using Patient Scan Data Strategic Approach in Full-Endoscopic Spine Surgery: Bilateral Contralateral Laminoplasty (FE-BCL) to Preserve Posterior Stabilizing Structures Regardless of Anatomical Variations Comparison of lower limb muscle characteristics, femoral morphology, and bone mineral density between femoral neck and intertrochanteric fractures using AI-based CT analysis CT-Based Navigation Reduces Outliers and Osteotomy Variability in Curved Varus Osteotomy for Osteonecrosis of the Femoral Head: A Retrospective Comparative Study Sex-specific anatomy and when to choose a 32-mm glenosphere in reverse shoulder arthroplasty: a 3D CT simulation and ROC analysis Accuracy and precision of planned glenoid guide-pin placement in reverse shoulder arthroplasty: a cadaveric comparison of fluoroscopy-guided freehand technique, patient-specific instrumentation, and navigation Automated Segmentation of the Sacral Canal for Large-Scale Analysis of Demographic, Densitometric and Morphometric Sacral Measurements in CT Images Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index Association Between Oral Function and Postoperative Physical Activity Following Total Hip Arthroplasty: A Prospective Observational Study
Takao, Masaki	Lumbar volumetric Bone Mineral Density Estimation from A Plain X-ray via Generation of BMD Distribution Maps.
Takaoka, Yusuke	3D CT Volume Reconstruction from a Single Intraoperative Hip Fluoroscopy Image
Takashima, Kazuma	Automated Multi-Severity Classification and Collapse Risk Prediction of Osteonecrosis of the Femoral Head from MRI: Integrating Deep Learning and Geometric Analysis Effect of skin incision orientation on acetabular cup placement accuracy and precision in anterolateral supine approach total hip arthroplasty using computed tomography-based navigation
Takashima, Kazuma	Variation and agreement rate in preoperative three-dimensional planning for total hip arthroplasty across hip surgeons Clinical and radiographic outcomes of rotational acetabular osteotomy using CT-based navigation for developmental dysplasia of the hip Side-to-side differences in femoral neck bone mineral density in patients undergoing surgery for adult spinal deformity CT-Based Navigation Reduces Outliers and Osteotomy Variability in Curved Varus Osteotomy for Osteonecrosis of the Femoral Head: A Retrospective Comparative Study Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index
Takashima, Kazuma	Role of Implant Range of Motion in Preventing Recurrent Anterior Dislocation After Revision Total Hip Arthroplasty Clinical and radiographic outcomes of rotational acetabular osteotomy using CT-based navigation for developmental dysplasia of the hip Comparison of lower limb muscle characteristics, femoral morphology, and bone mineral density between femoral neck and intertrochanteric fractures using AI-based CT analysis
Takeda, Koji	Comparative analysis of intraoperative kinematics among different total knee arthroplasty designs: Can we restore medial pivot and eliminate anterior paradoxical motion?
Takeda, Saki	Oral hypofunction is associated with reduced skeletal muscle mass index in elderly women with end-stage knee osteoarthritis: a clinical assessment adjusted for objectively measured physical activity Association Between Oral Function and Postoperative Physical Activity Following Total Hip Arthroplasty: A Prospective Observational Study
Takegami, Yasuhiko	Clinical outcomes of navigation assisted transtrochanteric rotational osteotomy for osteonecrosis of the head Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index
Taketomi, Shuuji	Perioperative Femorotibial Rotational Change is Associated with Worsened Intraoperative Knee Kinematics and Poorer Clinical Outcomes in Total Knee Arthroplasty
Talbot, Hugues	Lumbar volumetric Bone Mineral Density Estimation from A Plain X-ray via Generation of BMD Distribution Maps.
Tamura, Daisuke	Three-Dimensional Printing for Intramedullary Pin Fixation in Femoral Diaphyseal Fracture with Osteogenesis Imperfecta: A Case Report
Tamura, Kazunori	Variation and agreement rate in preoperative three-dimensional planning for total hip arthroplasty across hip surgeons
Tamura, Ryu	Three-dimensional Computed Tomography Based Preoperative Simulation for Intramedullary Nailing of Distal Tibial Fractures; Both Reduction and Implanting Simulation
Tanaka, Hiroyuki	Progressive Whole-Joint Stabilization Driven by Early Morphological Remodeling and Surgical Restoration of Biomechanics in Growing Patients With Capitellar Osteochondritis Dissecans Cartilage Visualization on Dual-Energy CT Using Optimized Material Pairing
Tanaka, Kensei	Navigation accuracy according to cup geometry and fixation method in total hip arthroplasty
Tanaka, Sakae	Perioperative Femorotibial Rotational Change is Associated with Worsened Intraoperative Knee Kinematics and Poorer Clinical Outcomes in Total Knee Arthroplasty
Tani, Tetsuro	Variation and agreement rate in preoperative three-dimensional planning for total hip arthroplasty across hip surgeons Role of Implant Range of Motion in Preventing Recurrent Anterior Dislocation After Revision Total Hip Arthroplasty Clinical and radiographic outcomes of rotational acetabular osteotomy using CT-based navigation for developmental dysplasia of the hip Side-to-side differences in femoral neck bone mineral density in patients undergoing surgery for adult spinal deformity Comparison of lower limb muscle characteristics, femoral morphology, and bone mineral density between femoral neck and intertrochanteric fractures using AI-based CT analysis Effect of skin incision orientation on acetabular cup placement accuracy and precision in anterolateral supine approach total hip arthroplasty using computed tomography-based navigation Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index
Taninaka, Atsushi	TIBIAL VARUS RESTRICTION DOES NOT COMPROMISE EARLY OUTCOMES IN ROBOTIC-ASSISTED KINEMATIC ALIGNMENT TOTAL KNEE ARTHROPLASTY
Temporin, Ko	Progressive Whole-Joint Stabilization Driven by Early Morphological Remodeling and Surgical Restoration of Biomechanics in Growing Patients With Capitellar Osteochondritis Dissecans
ten Cate, Wouter	Predicting Plantar Pressure from Non-Weight-Bearing MRI Using a Finite Element Model
Tetsunaga, Tomonori	ACCURACY VERIFICATION OF AN AI-BASED NAVIGATION SYSTEM FOR THA IN SEVERE HIP DYSPLASIA: IMPACT OF AUTOMATED SEGMENTATION SPEED AND ILIAC CREST REGISTRATION
Teule, Erin	3D Geometric Articular Surface Analysis of the Wrist for Implant Design
Thongoumyai, Tosapon	COMPARISON OF FEMORAL COMPONENT ROTATION BETWEEN FUNCTIONAL ALIGNMENT VERSUS MECHANICAL ALIGNMENT IN BILATERAL TOTAL KNEE ARTHROPLASTY: A PROSPECTIVE RANDOMIZED CONTROLLED TRIAL
Thoviste, Garance	Learning Curve for rTSA Navigation Procedure With a Single System - A Large Scale Study Automatic Quality Assessment and Uncertainty Localization on AI-generated digital twins of the shoulder Automatic Bones Segmentation for Total Ankle Arthroplasties Planning and Navigation
Tizzard, Cassidy	Predicted Bone Union Propensity in Mini-Plate-Based Mandibular Reconstruction Surgery is Affected by Bone Cut Geometry
Toda, Akihiko	Comparison of Implant Positioning Accuracy Between Mako and ROSA Robotic-Assisted Total Knee Arthroplasty Using Three-Dimensional CT Analysis
Tokioka, Takamitsu	Recent Advances in Atlantoaxial Fixation: Minimizing Invasiveness While Enhancing Construct Stability
Tokunaga, Kunihiko	Intraoperative Changes in Hip Range of Motion Following Total Hip Arthroplasty: A Quantitative Analysis Using CT-Based Navigation. Literature review as a basis for psoas syndrome risk management in THA Analysis of safe zones for anterior overhang and cup coverage Artificial Intelligence Guided Segmentation of Novel CT-Based Navigation Produced Quick Preoperative Preparation and Accurate Cup Placement in Total Hip Arthroplasty
Tone, Shine	CLINICAL OUTCOMES AND SOFT TISSUE LAXITY AFTER ROBOT-ASSISTED FUNCTIONALLY AND MECHANICALLY ALIGNED TOTAL KNEE ARTHROPLASTY ACCURACY OF IMPLANT PLACEMENT IN ROBOTIC-ASSISTED UNICOMPARTMENTAL KNEE ARTHROPLASTY USING THE CORI SYSTEM COMPARISON OF ACCURACY OF CUP POSITION IN TOTAL HIP ARTHROPLASTY USING NAVBIT SPRINT AND AR-BASED CT NAVIGATION COMPARISON OF ACETABULAR CUP PLACEMENT BETWEEN CT-BASED AND PINLESS PORTABLE NAVIGATION SYSTEMS USING AUGMENTED REALITY IN TOTAL HIP ARTHROPLASTY Factors influencing patient-reported outcome measures two years after handheld robotic assisted bi-cruciate stabilized total knee arthroplasty
Trehin, Agathe	Intraoperative HMD-Guided Glenoid Pin Placement in Shoulder Arthroplasty: Accuracy, Safe Zone and technical considerations Accuracy and Agreement Between Optical Navigation (NDI Polaris) and Postoperative CT for Glenoid Pin Placement: A Cadaveric Validation Study Using Augmented-Reality guidance
Troelsen, Anders	FURTHER POSTERIOR DWELLING OF THE FEMORAL COMPONENT ON AN MC COMPARED TO A CR BEARING. A FLUOROSCOPIC KINEMATIC ANALYSIS FROM A RANDOMISED CONTROLLED TRIAL
Tronchot, Alexandre	3D Reconstruction from Arthroscopic Images using NeRF: a preliminary in-silico study
Tsoran, Liat	From Imaging to Implant Design: A Fully In-Hospital Computer-Assisted Workflow for Large Bone Reconstruction Patient-Specific Ti-6Al-4V Lattice Implants for Critical-Sized, Weight-Bearing Limb Reconstruction: Average 45-months Surgical, Oncological and Functional Follow-up
Tsubosaka, Masanori	Comparison of Implant Positioning Accuracy Between Mako and ROSA Robotic-Assisted Total Knee Arthroplasty Using Three-Dimensional CT Analysis
Tsuda, Takashi	Comprehensive Gait Evaluation in Patients With Knee Osteoarthritis: Assessment Using a Smartphone-Based Markerless Motion Capture System Three-Dimensional Printing for Intramedullary Pin Fixation in Femoral Diaphyseal Fracture with Osteogenesis Imperfecta: A Case Report Preoperative Determinants of Patient Satisfaction in End-Stage Knee Osteoarthritis: A Focus on Pain Catastrophizing and Daily Physical Activity A Computed Tomography-Based Simulation of Stair Climbing after Curved Varus Osteotomy for Osteonecrosis of the Femoral Head Focusing on the Non-necrotic Weightbearing Area Oral hypofunction is associated with reduced skeletal muscle mass index in elderly women with end-stage knee osteoarthritis: a clinical assessment adjusted for objectively measured physical activity Evaluation of the use of a pressure-dispersion pad for kneeling after total knee arthroplasty Accuracy and precision of planned glenoid guide-pin placement in reverse shoulder arthroplasty: a cadaveric comparison of fluoroscopy-guided freehand technique, patient-specific instrumentation, and navigation Association Between Oral Function and Postoperative Physical Activity Following Total Hip Arthroplasty: A Prospective Observational Study
Tsuda, Takashi	Sex-specific anatomy and when to choose a 32-mm glenosphere in reverse shoulder arthroplasty: a 3D CT simulation and ROC analysis
Tsuji, Hibiki	Lumbar volumetric Bone Mineral Density Estimation from A Plain X-ray via Generation of BMD Distribution Maps.
Tsukada, Sachiyuki	A Smartphone-Based Augmented Reality–Aided Navigation System for Knee Arthroplasty A SMARTPHONE-BASED AUGMENTED REALITY NAVIGATION SYSTEM FOR HIP ARTHROPLASTY
Tsukada, Sachiyuki	Case reports of robotic-assisted hip arthroplasty after wide excision of pubic chondrosarcoma in the anterolateral approach.
Tuijthof, Gabrielle	3D Geometric Articular Surface Analysis of the Wrist for Implant Design Automated Conversion of 3D Bone Meshes to NURBS for Patient-Specific Implant Design Using A Novel Patient-Specific Guide with Radiopaque Alignment for Sacroiliac Joint Fusion: A Case Series An automated Statistical Shape Model workflow of the Craniomaxillofacial Complex for Shape Reconstruction Predicting Plantar Pressure from Non-Weight-Bearing MRI Using a Finite Element Model 3D Virtual Surgical Planning and Patient Specific Guide Design for Lapidus Surgery in a Hallux Valgus Patient Leg alignment normal values of a 2D framework might not be valid for a consensus-based 3D framework
Tuijthof, Gabriëlle	Innovative Technique for Less Invasive Revision of Cemented Total Hip Arthroplasty with Patient Specific Surgical Guides
U
Uchida, Daisuke	Oral hypofunction is associated with reduced skeletal muscle mass index in elderly women with end-stage knee osteoarthritis: a clinical assessment adjusted for objectively measured physical activity Association Between Oral Function and Postoperative Physical Activity Following Total Hip Arthroplasty: A Prospective Observational Study
Uehara, Masashi	Impact of osteosclerosis on cervical pedicle screw insertion using preoperative CT-based navigation
Ueki, Shinichi	POSTOPERATIVE SPORT-INCLUSIVE ACTIVITY AFTER COMPUTER-ASSISTED TOTAL HIP ARTHROPLASTY: ASSOCIATION WITH CUP PLACEMENT ACCURACY AND CENTER OF ROTATION REPRODUCIBILITY Influence of Three-Dimensional Hip Parameters Change on Lower Limb Kinematics and Kinetics During Gait Following Total Hip Arthroplasty Femoral Stem Alignment and Post-operative Patient Satisfaction in Total Hip Arthroplasty Using Computer-Assisted Equipment
Uemura, Keisuke	Symptom Duration–Related Muscle Atrophy And Fatty Degeneration Around The Hip Joint In Unilateral Hip Osteoarthritis: An AI-Based Imaging Study Variation and agreement rate in preoperative three-dimensional planning for total hip arthroplasty across hip surgeons Role of Implant Range of Motion in Preventing Recurrent Anterior Dislocation After Revision Total Hip Arthroplasty Construction of Statistical Shape Models for Lumbar Vertebrae and Femur from QCT Images and Analysis of Age-Related Changes in Bone Quality Parameters Lumbar volumetric Bone Mineral Density Estimation from A Plain X-ray via Generation of BMD Distribution Maps. Clinical and radiographic outcomes of rotational acetabular osteotomy using CT-based navigation for developmental dysplasia of the hip Automated Multi-Severity Classification and Collapse Risk Prediction of Osteonecrosis of the Femoral Head from MRI: Integrating Deep Learning and Geometric Analysis Difference of muscle volume and myosteatosis of lower limb muscles between knee osteoarthritis and hip osteoarthritis: artificial intelligence-based computed tomography analysis Which Cross-Sectional Area of the Lower Leg Muscle on Computed Tomography Reflects Skeletal Muscle Mass Reduction in Patients with Hip Osteoarthritis Most? Side-to-side differences in femoral neck bone mineral density in patients undergoing surgery for adult spinal deformity Comparison of lower limb muscle characteristics, femoral morphology, and bone mineral density between femoral neck and intertrochanteric fractures using AI-based CT analysis CT-Based Navigation Reduces Outliers and Osteotomy Variability in Curved Varus Osteotomy for Osteonecrosis of the Femoral Head: A Retrospective Comparative Study Effect of skin incision orientation on acetabular cup placement accuracy and precision in anterolateral supine approach total hip arthroplasty using computed tomography-based navigation CIRCUMFERENTIAL ANALYSIS OF ILIOPSOAS IMPINGEMENT RISK USING AI-BASED MUSCLE SEGMENTATION AND THE RADAR CHART METHOD: A CUP PLACEMENT SIMULATION STUDY Automated Segmentation of the Sacral Canal for Large-Scale Analysis of Demographic, Densitometric and Morphometric Sacral Measurements in CT Images Whole-Body Low Muscle Mass Screening Using a Leg CT–Derived Muscle Index
Uwai, Natsu	Construction of Statistical Shape Models for Lumbar Vertebrae and Femur from QCT Images and Analysis of Age-Related Changes in Bone Quality Parameters
V
van der Geest, Julia	HOW DO WE MEASURE WHAT WE ACHIEVE: ACCURACY OF 3D SURGICAL PLANS IN COMPLEX ORTHOPEDIC PROCEDURES
van der Kooij, Mirthe	HOW DO WE MEASURE WHAT WE ACHIEVE: ACCURACY OF 3D SURGICAL PLANS IN COMPLEX ORTHOPEDIC PROCEDURES
Veerman, Quinten	Leg alignment normal values of a 2D framework might not be valid for a consensus-based 3D framework
Verdonschot, Nico	Automated Conversion of 3D Bone Meshes to NURBS for Patient-Specific Implant Design Leg alignment normal values of a 2D framework might not be valid for a consensus-based 3D framework
Virk, Mandeep S.	Intraoperative Accuracy of Computer-Assisted Navigation for Treatment of Glenoids with Augmented Glenoid Components in Total Shoulder Arthroplasty
Voros, Sandrine	Automatic Quality Assessment and Uncertainty Localization on AI-generated digital twins of the shoulder
W
Walch, Gilles	Intraoperative HMD-Guided Glenoid Pin Placement in Shoulder Arthroplasty: Accuracy, Safe Zone and technical considerations Accuracy and Agreement Between Optical Navigation (NDI Polaris) and Postoperative CT for Glenoid Pin Placement: A Cadaveric Validation Study Using Augmented-Reality guidance
Wang, Hao-Ping	DEPTH-ACCURATE BINOCULAR AUGMENTED REALITY NAVITATION USING RETINAL PROJECTION FOR COMPUTER-ASSISTED ORTHOPEDIC SURGERY
Wangwittayakul, Visit	ACCURACY OF FEMORAL MECHANICAL AXIS REGISTRATION IN IMAGELESS ROBOTIC- ASSISTED TOTAL KNEE ARTHROPLASTY: A MULTI-CENTER COMPARISON OF THE 5-MM MEDIAL OFFSET AND INTERCONDYLAR NOTCH CENTER
Warner, Jon	Intraoperative HMD-Guided Glenoid Pin Placement in Shoulder Arthroplasty: Accuracy, Safe Zone and technical considerations
Washizaki, Fumiyuki	Evaluation of bilateral symmetry of periacetabular morphology without reference to the femoral head on CT axial images CIRCUMFERENTIAL ANALYSIS OF ILIOPSOAS IMPINGEMENT RISK USING AI-BASED MUSCLE SEGMENTATION AND THE RADAR CHART METHOD: A CUP PLACEMENT SIMULATION STUDY
Watamori, Kunihiko	Preoperative Determinants of Patient Satisfaction in End-Stage Knee Osteoarthritis: A Focus on Pain Catastrophizing and Daily Physical Activity Oral hypofunction is associated with reduced skeletal muscle mass index in elderly women with end-stage knee osteoarthritis: a clinical assessment adjusted for objectively measured physical activity Evaluation of the use of a pressure-dispersion pad for kneeling after total knee arthroplasty
Watanabe, Hiroshi	IMPACT OF INSTRUMENTED GAP-BALANCING TECHNIQUE ON FUNCTIONAL ALIGNMENT TOTAL KNEE ARTHROPLASTY IN SEVERE VARUS DEFORMITY
Watanabe, Ryunosuke	Optimizing Stem Length in Conversion Total Hip Arthroplasty After Intertrochanteric Fracture: A Finite Element Analysis
Watrinet, Julius	Patient-specific biomechanical analysis of the tibiofemoral tipping point in owHTO Analysis of inter-individual morphological variability in owHTO patients
Weil, Yoram	Use of Custom 3D-Printed Titanium Implants for Partial Joint Resurfacing Following Traumatic Injuries: A Preliminary Report
Weusthof, Quinten	Predicting Plantar Pressure from Non-Weight-Bearing MRI Using a Finite Element Model
Winter, Philipp	INTER-OBSERVER RELIABILITY DURING INTRA-OPERATIVE PASSIVE KNEE FLEXION: A HUMAN DONOR STUDY Intra-observer repeatability of intra-operative passive knee kinematics – a human donor study
Wong, Christie On-Yiu	Mixed Reality Spatial Computing In Orthopaedic Oncology: An experience of 72 cases
Wong, Kwok-Chuen	Mixed Reality Spatial Computing In Orthopaedic Oncology: An experience of 72 cases
Wong, Ronald Man-Yeung	EVALUATION OF LARGE LANGUAGE MODEL APPLICATIONS IN REVERSE SHOULDER ARTHROPLASTY
X
Xie, Tianshun	EVALUATION OF LARGE LANGUAGE MODEL APPLICATIONS IN REVERSE SHOULDER ARTHROPLASTY
Y
Yamada, Kazuki	ACCURACY VERIFICATION OF AN AI-BASED NAVIGATION SYSTEM FOR THA IN SEVERE HIP DYSPLASIA: IMPACT OF AUTOMATED SEGMENTATION SPEED AND ILIAC CREST REGISTRATION
Yamagami, Ryota	Perioperative Femorotibial Rotational Change is Associated with Worsened Intraoperative Knee Kinematics and Poorer Clinical Outcomes in Total Knee Arthroplasty
Yamaguchi, Makoto	Treatment for malignant bone tumor with patient’ specific cutting guide
Yamamoto, Hidehiro	Comprehensive Gait Evaluation in Patients With Knee Osteoarthritis: Assessment Using a Smartphone-Based Markerless Motion Capture System
Yamamoto, Kosuke	Variation and agreement rate in preoperative three-dimensional planning for total hip arthroplasty across hip surgeons
Yamamoto, Natsuki	Cartilage Visualization on Dual-Energy CT Using Optimized Material Pairing
Yamamoto, Tetsuya	ACCURACY VERIFICATION OF AN AI-BASED NAVIGATION SYSTEM FOR THA IN SEVERE HIP DYSPLASIA: IMPACT OF AUTOMATED SEGMENTATION SPEED AND ILIAC CREST REGISTRATION
Yamane, Hironori	Accuracy of Dual Mobility Cement Cup Placement Using Augmented Reality Navigation in Hip Arthroplasty for Complex Acetabular Reconstruction Surgery
Yamaoka, Shintaro	Clinical Outcomes of Full-Endoscopic Foraminotomy Assisted by O-arm Navigation for Cervical Radiculopathy Feasibility of 3D-Printed Rigid Spinal Orthoses Using Patient Scan Data Strategic Approach in Full-Endoscopic Spine Surgery: Bilateral Contralateral Laminoplasty (FE-BCL) to Preserve Posterior Stabilizing Structures Regardless of Anatomical Variations
Yamasaki, Takuma	Total hip arthroplasty using antero-lateral supine approach with CAOS ~ Optimal placement of prosthesis in cases of excessive femoral antetorsion ~
Yamashiro, Shoichiro	Evaluation of bilateral symmetry of periacetabular morphology without reference to the femoral head on CT axial images
Yokoyama, Norikazu	3D CT Volume Reconstruction from a Single Intraoperative Hip Fluoroscopy Image
Yoo, Junil	ACCESSIBLE SARCOPENIA SCREENING VIA MUSCLE VOLUME ESTIMATION FROM THREE-VIEW LONG-LENGTH LOWER-EXTREMITY RADIOGRAPHS ASSOCIATION OF PLASMA PROTEOMIC SIGNATURES WITH THIGH MUSCLE ADIPOSITY
Yoshizawa, Tomohiro	Optimizing Stem Length in Conversion Total Hip Arthroplasty After Intertrochanteric Fracture: A Finite Element Analysis
Yu, Melissa	Improving Workflow Efficiency of an Intraoperative Planning and Guidance System for Mandibular Reconstruction
Yuenyongviwat, Varah	ACCURACY OF FEMORAL MECHANICAL AXIS REGISTRATION IN IMAGELESS ROBOTIC- ASSISTED TOTAL KNEE ARTHROPLASTY: A MULTI-CENTER COMPARISON OF THE 5-MM MEDIAL OFFSET AND INTERCONDYLAR NOTCH CENTER
Yukizawa, Yohei	Computer Navigation–Assisted Osteochondroplasty Improves Achievement of Preoperative Cam Resection Plans in Femoroacetabular Impingement
Yung, Patrick Shu-Hang	EVALUATION OF LARGE LANGUAGE MODEL APPLICATIONS IN REVERSE SHOULDER ARTHROPLASTY
Yvinou, Agathe	3D Reconstruction from Arthroscopic Images using NeRF: a preliminary in-silico study
Z
Zeegers, Elgun	3D Virtual Surgical Planning and Patient Specific Guide Design for Lapidus Surgery in a Hallux Valgus Patient
Zhao, Hedi	Accurate Guidewire Placement for Scaphoid Fracture Fixation Using Biplanar X-Rays
Ziv-Baran, Tomer	Novel Automated Sub-Segmentation Tool for Quantification of Tumor Features in Soft-Tissue Sarcoma of the Thigh
Zuckerman, Joseph D.	Intraoperative Accuracy of Computer-Assisted Navigation for Treatment of Glenoids with Augmented Glenoid Components in Total Shoulder Arthroplasty

Disclaimer | Powered by EasyChair Smart Program