Download PDFOpen PDF in browser

Towards a Commercial System for Intraoperative Manufacture of Patient-Specific Guides for Shoulder Arthroplasty

5 pagesPublished: October 26, 2019

Abstract

The accurate placement of orthopaedic implants according to a biomechanically derived preoperative plan is an important consideration in the long-term success of these interventions. Guidance technologies are widely described however, high cost, complex theatre integration, intraoperative inefficiency and functional limitations have prevented the widespread use. A novel, intraoperative mechatronics platform is presented, capable of the rapid, intraoperative manufacture of low-cost patient-specific guides. The device consists of a tableside robot with sterile drapes and some low cost, sterile disposable components. The robot comprises a 3D optical scanner, a three-axis sterile computer numerical control (CNC) drill and a two-axis receptacle into which the disposable consumables may be inserted. The sterile consumable comprises a region of rapidly setting moldable material and a clip allowing it to be reversibly attached to the tableside robot. In use, patient computed tomography (CT) imaging is obtained at any point prior to surgery and a surgical plan is created on associated software. This plan describes the axis and positioning of one or more guidewires which may, in turn, locate the prosthesis into position. Intraoperatively, osseous anatomy is exposed, and the sterile disposable is used to rapidly create a mould of the joint surface. Once set, the mould is inserted into the robot and an optical scan of the surface is taken followed by automatic surface registration, bringing the optical scan into the same coordinate frame of reference as the CT data and plan. The CNC drill is orientated such that the drill axis and position exactly matches the planned axis and position with respect to the moulded surface. A guide hole is drilled into the mould blank, which is removed from the robot and placed back into the patient with the moulded surface ensuring exact replacement. A wire is subsequently driven through the guide hole into the osseous anatomy in accordance with the preoperative plan. The guide blank may be slid off the wire and discarded allowing the procedure to continue in the normal manner. A Pre-clinical prototype robot was constructed and used to insert guide wires into a 12 cadaveric shoulder arthroplasty specimens according to a ‘pre-operative’ plan. A ‘postoperative’ CT scan was used to assess accuracy with respect to the ‘pre-operative’ plan. Initial average end to end accuracy was 1.2 mm with respect to planned vs achieved glenoid point of entry and 2.2deg version, 1.6deg inclination with respect to planned vs achieved wire angle. These data demonstrate accuracy within the bounds of relevant literature with a significant margin for potential improvement.

Keyphrases: Arthroplasty, Cadaver Trial, joint replacement, Mechatronics, Navigation, PSI, registration, Robotics

In: Patrick Meere and Ferdinando Rodriguez Y Baena (editors). CAOS 2019. The 19th Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery, vol 3, pages 110--114

Links:
BibTeX entry
@inproceedings{CAOS2019:Towards_Commercial_System_for,
  author    = {Alastair Darwood and Simon Hurst and Guillaume Villatte and Ryan Fenton and Fabio Tatti and Hadi El-Daou and Peter Reilly and Roger Emery and Ferdinando Rodriguez Y Baena},
  title     = {Towards a Commercial System for Intraoperative Manufacture of Patient-Specific Guides for Shoulder Arthroplasty},
  booktitle = {CAOS 2019. The 19th Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery},
  editor    = {Patrick Meere and Ferdinando Rodriguez Y Baena},
  series    = {EPiC Series in Health Sciences},
  volume    = {3},
  pages     = {110--114},
  year      = {2019},
  publisher = {EasyChair},
  bibsource = {EasyChair, https://easychair.org},
  issn      = {2398-5305},
  url       = {https://easychair.org/publications/paper/rH7J},
  doi       = {10.29007/wkh3}}
Download PDFOpen PDF in browser