The purpose of the study is to select an effective methods and equipment for observing deformations in dangerous areas of the terrain, such as areas that are undermined by underground mining. Experimental work was carried out at the facilities of the Ordzhonikidze mine using various remote sensing methods, including those developed by the authors. The research used a design consisting of a digital camera and a GPS receiver. The performed analysis of the obtained survey results, using the proposed design of two devices, has shown its effectiveness in remote methods of observing the objects deformations located in areas undermined by mining operations. The scientific novelty of the results obtained lies in the methods development for remote observation of deformations of the ground's surface and objects, based on the structure use from a digital camera and a GPS receiver. This method was developed to increase the efficiency of performing research on objects deformations located in places that are dangerous for finding a person. The efficiency of using terrestrial digital stereo survey when the coordinates of the photographing points are determined with the help of GPS has been proved. The practical significance of the study lies in increasing work efficiency the on monitoring deformations of the earth's surface, buildings and structures located in areas dangerous for field work by traditional methods, which are performed using leveling and measuring the distances between the benchmarks of profile lines, which are usually used on areas undermined by underground mining. The use of terrestrial digital stereo photography with the coordination of photographing stations using GPS allows remote determination of the spatial position of the observed points with the required accuracy. Key words: ground stereoscopic survey, collapse zone, digital camera, GPS.