| ||||
| ||||
![]() Title:Slug Flow Modeling for Branched Split and Recombine Microreactor for Green Application Authors:Mariam Megawer, Ahmed El Shazly, Abdelrahman Zkria, Ahmed Rashad Fateh Elbab and Usama Eldemerdash Conference:TMREES26Lb Tags:Biodiesel Synthesis, CFD Simulation, Process Intensification, Slug Flow Hydrodynamics, Split-and-Recombine Microreactor and Volume of Fluid (VOF) Abstract: Biodiesel offers an alternative to petroleum, reducing fossil fuel depletion and environmental impacts. However, microscale mixing enhances its production more than batch reactors. This study investigates cross-T entrance geometry and branch spacing effects on multiphase hydrodynamics in a BSAR reactor. The branched micro-reactor was optimized under constant simulation conditions and total time of 10 s. The optimized inclined cross-T configuration promoted rapid interface pinch-off and stable, monodispersed Taylor slugs, giving an interfacial area of 2.95338*10-6 m2 at the iso-surface. Reducing the junction width to 0.4 mm increased slug generation and interfacial area. Branch spacing was investigated, with increasing spacing from 1 to 2 mm raising the iso-surface area from (1.15892 to 1.32656) *10-5 m2, an approximately 14.5% increase. At 4 mm spacing, the area decreased to 1.27389 *10-5 m2. Overall, increasing spacing to an optimum value as 2mm provides the balance between phase segmentation and interfacial development. Slug Flow Modeling for Branched Split and Recombine Microreactor for Green Application ![]() Slug Flow Modeling for Branched Split and Recombine Microreactor for Green Application | ||||
| Copyright © 2002 – 2026 EasyChair |
