SIMS 2020: 61ST INTERNATIONAL CONFERENCE OF SCANDINAVIAN SIMULATION SOCIETY

A
Aamo, Ole Morten	Model Based Early Kick/Loss Detection and Attenuation with Topside Sensing in MPD
Abdirizak Mohamed, Hussein	Complementing existing CHP plants with pyrolysis and gasification to produce liquid biofuels
Agu, Cornelius Emeka	A new Approach for Scaling Up from a Small Cold to a Large Hot Bed for Biomass Conversion in a Bubbling Fluidized Bed Reactor
Agu, Onyinye Victoria	Real-time monitoring of wood cladding spray painting properties and nozzle condition using acoustic chemometrics
Ahmadpour Samani, Nastaran	Fluidized bed calcination of cement raw meal: Laboratory experiments and CPFD simulations CPFD simulation of enhanced cement raw meal fluidization through mixing with coarse, inert particles
Ahmeddin, Selman	Complementing existing CHP plants with pyrolysis and gasification to produce liquid biofuels
Airikka, Pasi	Simulation of Adaptive Cruise Control for Control Engineering Education Purposes
Aleikish, Khaled	Hybrid model for fast solution of thermal synchronous generator with heat exchanger
Andersen, Christian	Improving gas distribution and evaporation in gas cooling tower at Norcem Brevik
Anderson, Gwen	ASME B16.9 Piping Components: An Analysis of the Critical Dimensions
Aromada, Solomon	Process Simulation, Cost Estimation and Optimization of CO2 Capture using Aspen HYSYS
Aromada, Solomon Aforkoghene	Simulation and Cost Optimization of different Heat Exchangers for CO2 Capture
Asgari, Hamid	Recurrent Neural Network Based Simulation of a Single Shaft Gas Turbine
Aslanidou, Ioanna	CFD investigations of subcooled nucleate boiling flows and acting interfacial forces in concentric pipes Sensor fault detection with Bayesian networks Simulation study for comparison of control structures for BFB biomass boiler A Data-Driven Approach for the Prediction of Subcooled Boiling Heat Transfer
B
Bakke, Rune	Anaerobic Digestion of Hemicellulosic Sugars Implemented in ADM1 Simple modelling approach using Modelica for microbial electrosynthesis
Barahmand, Zahir	Extended model for control of thermal energy in buildings Analysis of model for control of thermal energy in buildings
Bel Fdhila, Rebei	CFD investigations of subcooled nucleate boiling flows and acting interfacial forces in concentric pipes A Data-Driven Approach for the Prediction of Subcooled Boiling Heat Transfer
Bergland, Wenche Hennie	Anaerobic Digestion of Hemicellulosic Sugars Implemented in ADM1
Bhattarai, Ashish	Extended model for control of thermal energy in buildings Analysis of model for control of thermal energy in buildings
Bhattarai, Sabin	Front Tracking of Shock and Combustion Waves by an Optimal Transport Framework
Bjerketvedt, Dag	Front Tracking of Shock and Combustion Waves by an Optimal Transport Framework
Bojesen, Carsten	Sensitivity Analysis of Optimised Large Scale District Heating Heat Pump Concepts
Bos, Steven	Automated synthesis of netlists for ternary-valued n-ary logic functions in CNTFET circuits
Braun, Philipp	Challenges of CAD conversion to 3D visualisation environments with respect to kinematic dependencies
Bråthen, Terje	Simulation of condensation in raw biogas containing H2S
C
Chaudhuri, Arnab	Numerical analysis of the performance of green facades
Chhantyal, Khim	Adaptive Response Time for Integrated Autodriller Controller
Christiansen, Marianne	Numerical analysis of the performance of green facades
Condra, Thomas	Heat and Mass Transfer Model for Droplets with Internal Circulation
D
Dahlquist, Erik	Complementing existing CHP plants with pyrolysis and gasification to produce liquid biofuels DECISION TREE FOR ENAHANCING MAINTENANCE ACTIVITIES WITH DRONES IN THE MINING BUSINESS
Dewan, Akshay	EPIRUST: TOWARDS A FRAMEWORK FOR LARGE-SCALE AGENT-BASED EPIDEMIOLOGICAL SIMULATIONS USING RUST LANGUAGE
Dinamarca, Carlos	Simple modelling approach using Modelica for microbial electrosynthesis
E
Eikeland, Marianne S	Simulation of entrained flow gasification reactor with Multi Phase Particle in Cell (MP-PIC) approach
Eldrup, Nils	Process Simulation, Cost Estimation and Optimization of CO2 Capture using Aspen HYSYS
Eldrup, Nils Henrik	Simulation and Cost Optimization of different Heat Exchangers for CO2 Capture
Engell, Sebastian	Real-time optimization and control with inaccurate model
Esbensen, Kim H.	Partial least squares PLS1 vs. PLS2 – optimal input/output modeling in a compound industrial drying oven Real-time monitoring of wood cladding spray painting properties and nozzle condition using acoustic chemometrics
F
Fagerheim, Sofie	Simulation of performance data at TCM Mongstad
Farzin, Amir	Fertilizer Granulation: Comparison of Modeling Languages
Fritzson, Peter	Overview and Outlook for the OpenModelica Environment and its Use for Cyber-physical System Development
Furenes, Beathe	Development of a model to estimate parameters in a snowpack based on capacitive measurements
Furuvik, Nora Cecilie Ivarsdatter Skau	Comparison of experimental and computational study of the fluid dynamics in fluidized beds with agglomerates Computational modeling of ash melting and agglomeration in fluidized bed gasifiers
G
Ghimire, Nirmal	Anaerobic Digestion of Hemicellulosic Sugars Implemented in ADM1
Gjerde, Ida Helene	ASME B16.9 Piping Components: An Analysis of the Critical Dimensions
Glemmestad, Bjørn	Application of population balance equation for continuous granulation process in spherodizers and rotary drums Solving the population balance equation for granulation processes: particle layering and agglomeration
Grande Østby, Torbjørn	Parameter estimation using Bayesian approach for a model of Pressure Peaking Phenomena-ignited H2 releases.
Gundersen, Henning	Automated synthesis of netlists for ternary-valued n-ary logic functions in CNTFET circuits
H
Hakalahti, Hannu	Testing ERP and MES with Digital Twins
Halstensen, Maths	Classification of Gases and Estimation of Gas Flow Rate Based on Unsupervised and Supervised Learning Respectively Partial least squares PLS1 vs. PLS2 – optimal input/output modeling in a compound industrial drying oven Real-time monitoring of wood cladding spray painting properties and nozzle condition using acoustic chemometrics
Halstensen, Simen S.	Classification of Gases and Estimation of Gas Flow Rate Based on Unsupervised and Supervised Learning Respectively
Hammer Strømman, Anders	Study of an Industrial Electrode Dryer of a Lithium-Ion Battery Manufacturing Plant: Dynamic Modelling
Hansen, Ole Christopher	Computational study of CO2 injection for enhanced oil recovery and storage
Haukås, Andrea	Process Simulation, Cost Estimation and Optimization of CO2 Capture using Aspen HYSYS
Hayatnagarkar, Harshal	EPIRUST: TOWARDS A FRAMEWORK FOR LARGE-SCALE AGENT-BASED EPIDEMIOLOGICAL SIMULATIONS USING RUST LANGUAGE
Heitmann, Marianne	Modelling and Evaluation of Adiabatic Compressed Air Energy Storage (A-CAES) System with Packed Bed
Helgsen, Sondre Luca	ASME B16.9 Piping Components: An Analysis of the Critical Dimensions
Helvig, Joakim	Process Simulation, Cost Estimation and Optimization of CO2 Capture using Aspen HYSYS
Hinckeldeyn, Johannes	Challenges of CAD conversion to 3D visualisation environments with respect to kinematic dependencies
Hirvonen, Juha	Testing ERP and MES with Digital Twins
Holta, Håvard	Model Based Early Kick/Loss Detection and Attenuation with Topside Sensing in MPD
Hovland, Jon	Simulation of condensation in raw biogas containing H2S
Hundhausen, Ulrich	Partial least squares PLS1 vs. PLS2 – optimal input/output modeling in a compound industrial drying oven Real-time monitoring of wood cladding spray painting properties and nozzle condition using acoustic chemometrics
Hæstad, Ida	Process Simulation, Cost Estimation and Optimization of CO2 Capture using Aspen HYSYS
I
Iplik, Esin	Sensor fault detection with Bayesian networks
J
Jackson, Steven	Sensitivity Analysis and Case Studies for CO2 Transportation Energy Consumption.
Jaiswal, Rajan	Improving gas distribution and evaporation in gas cooling tower at Norcem Brevik Study of agricultural waste gasification in an air-blown bubbling fluidized bed using a CPFD model Comparison of experimental and computational study of the fluid dynamics in fluidized beds with agglomerates Computational modeling of ash melting and agglomeration in fluidized bed gasifiers
Jakobsen, Krister	Computational modeling of ash melting and agglomeration in fluidized bed gasifiers
Javaheri, Vahid	Semi-automatic optimization of steel heat treatment to achieve desired microstructure
Jemenica, Mladen	ASME B16.9 Piping Components: An Analysis of the Critical Dimensions
Jinasena, Asanthi	Model Based Early Kick/Loss Detection and Attenuation with Topside Sensing in MPD Study of an Industrial Electrode Dryer of a Lithium-Ion Battery Manufacturing Plant: Dynamic Modelling
Jondahl, Morten Hansen	Model Based Early Kick/Loss Detection and Attenuation with Topside Sensing in MPD
Juuso, Esko	Intelligent methodologies in recursive data-based modelling Scandinavian Simulation Society 60+ ready for future challenges
K
K. Jayarathna, Chameera	Fluidized bed calcination of cement raw meal: Laboratory experiments and CPFD simulations CPFD simulation of enhanced cement raw meal fluidization through mixing with coarse, inert particles
Karlsen, Vibeke B.	Anaerobic Digestion of Hemicellulosic Sugars Implemented in ADM1
Kasin, Fredrik	Improving gas distribution and evaporation in gas cooling tower at Norcem Brevik
Kauppi, Janne	Multivariate linear regression model of paste thickener
Kauvosaari, Sakari	Multivariate linear regression model of paste thickener
Koistinen, Antti	Adaptation framework for an industrial digital twin
Kosonen, Mika	Multivariate linear regression model of paste thickener
Kreutzfeldt, Jochen	Challenges of CAD conversion to 3D visualisation environments with respect to kinematic dependencies
Kshirsagar, Jayanta	EPIRUST: TOWARDS A FRAMEWORK FOR LARGE-SCALE AGENT-BASED EPIDEMIOLOGICAL SIMULATIONS USING RUST LANGUAGE
Kuisma, Petri	A lightweight, agile and modular method for producing digital twins using game engines
Kyprianidis, Konstantinos	CFD investigations of subcooled nucleate boiling flows and acting interfacial forces in concentric pipes Sensor fault detection with Bayesian networks Simulation study for comparison of control structures for BFB biomass boiler A Data-Driven Approach for the Prediction of Subcooled Boiling Heat Transfer
L
Lach, Agnieszka Weronika	Parameter estimation using Bayesian approach for a model of Pressure Peaking Phenomena-ignited H2 releases.
Lande, Anne Marie	Process Simulation, Cost Estimation and Optimization of CO2 Capture using Aspen HYSYS
Lappalainen, Jari	Recurrent Neural Network Based Simulation of a Single Shaft Gas Turbine
Larkiola, Jari	Effect of anisotropic growth and grain boundary impingement on bainite transformation models
Larsen, Are	Improving gas distribution and evaporation in gas cooling tower at Norcem Brevik
Lie, Bernt	Model Based Early Kick/Loss Detection and Attenuation with Topside Sensing in MPD Hybrid model for fast solution of thermal synchronous generator with heat exchanger Extended model for control of thermal energy in buildings Analysis of model for control of thermal energy in buildings Hybrid Mechanistic+Neural Model of Laboratory Helicopter Application of population balance equation for continuous granulation process in spherodizers and rotary drums Solving the population balance equation for granulation processes: particle layering and agglomeration Fertilizer Granulation: Comparison of Modeling Languages The influence of surge tanks on the water hammer effect at different hydro power discharge rates Mechanistic modeling of different types of surge tanks and draft tubes for hydro power plants
Louis, Jean-Nicolas	Impacts of demand side management programs to domestic hot water heating load profiles in smart buildings Multi-Scale Smart Building Simulation Platform for Energy, Market and Automation Solutions
Lundberg, Joachim	CFD Simulations of Open Drainage System for Offshore Applications (Caission) using OpenFOAM
Lundberg, Tomas	Modelling of the Lime Kiln at SSAB, Raahe
Lysaker, Ola Marius	Front Tracking of Shock and Combustion Waves by an Optimal Transport Framework
Lönnermark, Anders	DECISION TREE FOR ENAHANCING MAINTENANCE ACTIVITIES WITH DRONES IN THE MINING BUSINESS
M
Martinsen, Madeleine	DECISION TREE FOR ENAHANCING MAINTENANCE ACTIVITIES WITH DRONES IN THE MINING BUSINESS
Mattila, Olli	Modelling of the Lime Kiln at SSAB, Raahe
Meijer, Willem	Modelling of Water Levels in a Reservoir using Modelica
Melhus, Ole	Numerical analysis of the performance of green facades
Moldestad, Britt Margrethe Emilie	Simulation of a purification plant for pyrolysis gas based on plastic waste Study of agricultural waste gasification in an air-blown bubbling fluidized bed using a CPFD model A new Approach for Scaling Up from a Small Cold to a Large Hot Bed for Biomass Conversion in a Bubbling Fluidized Bed Reactor Near-well simulation of oil production from a horizontal well with ICD and AICD completions in the Johan Sverdrup field using OLGA/ROCX Computational study of CO2 injection for enhanced oil recovery and storage Comparison of experimental and computational study of the fluid dynamics in fluidized beds with agglomerates Computational modeling of ash melting and agglomeration in fluidized bed gasifiers Simulation of entrained flow gasification reactor with Multi Phase Particle in Cell (MP-PIC) approach
Moradi, Ali	Near-well simulation of oil production from a horizontal well with ICD and AICD completions in the Johan Sverdrup field using OLGA/ROCX
Moujahidi, Zidane	CFD Simulations of Open Drainage System for Offshore Applications (Caission) using OpenFOAM
Murillo Abril, Mercedes Noemi	Development of a model to estimate parameters in a snowpack based on capacitive measurements
N
Nielsen, Mads Pagh	Dynamic modeling of heat pumps for ancillary services in local district heating concepts
Normann, Fredrik	Simulation and Cost Optimization of different Heat Exchangers for CO2 Capture
Nybø Risto, Halvor	Automated synthesis of netlists for ternary-valued n-ary logic functions in CNTFET circuits
Nyholm, J. Fredrik	Predicting centrifugal compressor off-design operation in an operator training simulator
O
Ohenoja, Markku	Adaptation framework for an industrial digital twin
Oppegård, Emil	Study of an Industrial Electrode Dryer of a Lithium-Ion Battery Manufacturing Plant: Dynamic Modelling
Orangi, Sina	Extended model for control of thermal energy in buildings Analysis of model for control of thermal energy in buildings
Orre, Joel	Modelling of the Lime Kiln at SSAB, Raahe
Ory, Emmanuel	Recurrent Neural Network Based Simulation of a Single Shaft Gas Turbine
P
Paananen, Joni	Semi-automatic optimization of steel heat treatment to achieve desired microstructure
Paananen, Timo	Modelling of the Lime Kiln at SSAB, Raahe
Padir, Akash	Adaptive Response Time for Integrated Autodriller Controller
Pandey, Madhusudhan	The influence of surge tanks on the water hammer effect at different hydro power discharge rates Mechanistic modeling of different types of surge tanks and draft tubes for hydro power plants
Pfaff, Jakob	Predicting Thermal Losses in a LowEnergy Building
Pfeifer, Christoph	A new Approach for Scaling Up from a Small Cold to a Large Hot Bed for Biomass Conversion in a Bubbling Fluidized Bed Reactor
Pfeiffer, Carlos	Modelling and Evaluation of Adiabatic Compressed Air Energy Storage (A-CAES) System with Packed Bed
Pohjonen, Aarne	Semi-automatic optimization of steel heat treatment to achieve desired microstructure Effect of anisotropic growth and grain boundary impingement on bainite transformation models
Poulsen, Mathias	Heat and Mass Transfer Model for Droplets with Internal Circulation
Poupart, Frédéric	Numerical analysis of the performance of green facades
Pulkkinen, Jari	Impacts of demand side management programs to domestic hot water heating load profiles in smart buildings Multi-Scale Smart Building Simulation Platform for Energy, Market and Automation Solutions
Pyykkönen, Juha	Semi-automatic optimization of steel heat treatment to achieve desired microstructure
Q
Qaredaghi, Ebrahim	Simulation of a purification plant for pyrolysis gas based on plastic waste
R
Rabhi, Achref	CFD investigations of subcooled nucleate boiling flows and acting interfacial forces in concentric pipes
Rackauckas, Christopher	Hybrid Mechanistic+Neural Model of Laboratory Helicopter
Ronasi, Sara	Simulation of a purification plant for pyrolysis gas based on plastic waste
Ruhanen, Eemeli	Multivariate linear regression model of paste thickener
Ruismäki, Vesa-Matti	A lightweight, agile and modular method for producing digital twins using game engines
Ruokonen, Tuula	Digital Twins utilization throughout the Life Cycle of Industrial Processes
Ruuska, Jari	Multivariate linear regression model of paste thickener
Ruusunen, Mika	Adaptation framework for an industrial digital twin
S
Salman, Awais	Complementing existing CHP plants with pyrolysis and gasification to produce liquid biofuels
Samarakoon, Gamunu	Simple modelling approach using Modelica for microbial electrosynthesis
Samuelsen, Dag A. H.	Predicting Thermal Losses in a LowEnergy Building
Seppälä, Oskari	Effect of anisotropic growth and grain boundary impingement on bainite transformation models
Sharfuddin, Mohammad	Simulation of heat recovery from data centers using heat pumps
Sharma, Roshan	Model Based Early Kick/Loss Detection and Attenuation with Topside Sensing in MPD Hybrid Mechanistic+Neural Model of Laboratory Helicopter
Sivalingam, Vasan	Simple modelling approach using Modelica for microbial electrosynthesis
Skeie, Nils-Olav	Development of a model to estimate parameters in a snowpack based on capacitive measurements
Sliwinski, Martin	Challenges of CAD conversion to 3D visualisation environments with respect to kinematic dependencies
Soibam, Jerol	A Data-Driven Approach for the Prediction of Subcooled Boiling Heat Transfer
Stokke Burheim, Odne	Study of an Industrial Electrode Dryer of a Lithium-Ion Battery Manufacturing Plant: Dynamic Modelling
Sundsdal, Oda Martine	Numerical analysis of the performance of green facades
Suul, Jon Are	Study of an Industrial Electrode Dryer of a Lithium-Ion Battery Manufacturing Plant: Dynamic Modelling
Syverud, Elisabet	Predicting Thermal Losses in a LowEnergy Building Modelling and Evaluation of Adiabatic Compressed Air Energy Storage (A-CAES) System with Packed Bed
Säker, Örjan	DECISION TREE FOR ENAHANCING MAINTENANCE ACTIVITIES WITH DRONES IN THE MINING BUSINESS
Sørensen, Kim	Heat and Mass Transfer Model for Droplets with Internal Circulation Dynamic modeling of heat pumps for ancillary services in local district heating concepts Sensitivity Analysis of Optimised Large Scale District Heating Heat Pump Concepts
T
Tepsa, Tauno	A lightweight, agile and modular method for producing digital twins using game engines
Thapa, Rajan K.	Improving gas distribution and evaporation in gas cooling tower at Norcem Brevik Study of agricultural waste gasification in an air-blown bubbling fluidized bed using a CPFD model A new Approach for Scaling Up from a Small Cold to a Large Hot Bed for Biomass Conversion in a Bubbling Fluidized Bed Reactor ASME B16.9 Piping Components: An Analysis of the Critical Dimensions Simulation of entrained flow gasification reactor with Multi Phase Particle in Cell (MP-PIC) approach
Thomasen, Signe	Sensitivity Analysis of Optimised Large Scale District Heating Heat Pump Concepts
Thor Birgisson, Kjartan	Adaptive Response Time for Integrated Autodriller Controller
Timsina, Ramesh	Simulation of entrained flow gasification reactor with Multi Phase Particle in Cell (MP-PIC) approach
Tokheim, Lars Andre	A new Approach for Scaling Up from a Small Cold to a Large Hot Bed for Biomass Conversion in a Bubbling Fluidized Bed Reactor Fluidized bed calcination of cement raw meal: Laboratory experiments and CPFD simulations CPFD simulation of enhanced cement raw meal fluidization through mixing with coarse, inert particles
Tomas-Aparicio, Elena	Complementing existing CHP plants with pyrolysis and gasification to produce liquid biofuels
Tomperi, Jani	Adaptation framework for an industrial digital twin
V
Vesjolaja, Ludmila	Application of population balance equation for continuous granulation process in spherodizers and rotary drums Solving the population balance equation for granulation processes: particle layering and agglomeration Fertilizer Granulation: Comparison of Modeling Languages
Vinther, Kasper	Sensitivity Analysis of Optimised Large Scale District Heating Heat Pump Concepts
Visser, Jacobus Krige	The effect of input distribution skewness on the output distribution for project schedule simulation
Viumdal, Håkon	Model Based Early Kick/Loss Detection and Attenuation with Topside Sensing in MPD
W
Welahettige, Prasanna	Model Based Early Kick/Loss Detection and Attenuation with Topside Sensing in MPD
Westerlund, Toni	A lightweight, agile and modular method for producing digital twins using game engines
Winkler, Dietmar	Simple modelling approach using Modelica for microbial electrosynthesis Modelling of Water Levels in a Reservoir using Modelica
Y
Ylihärsilä, Mikko	Testing ERP and MES with Digital Twins
Z
Zaccaria, Valentina	Simulation study for comparison of control structures for BFB biomass boiler
Zenger, Kai	Notes on the Floquet-Lyapunov Theory of Linear Differential Systems
Zlatkovikj, Milan	Simulation study for comparison of control structures for BFB biomass boiler
Ø
Øi, Lars Erik	Simulation of condensation in raw biogas containing H2S Simulation of heat recovery from data centers using heat pumps Simulation and Cost Optimization of different Heat Exchangers for CO2 Capture Process Simulation, Cost Estimation and Optimization of CO2 Capture using Aspen HYSYS Simulation of performance data at TCM Mongstad
Øyvang, Thomas	Hybrid model for fast solution of thermal synchronous generator with heat exchanger

Disclaimer | Powered by EasyChair Smart Program