SAIMECHEWC2024: SAIMECHE WESTERN CAPE POSTGRADUATE CONFERENCE 2024

A
Augustyn, Wilhelm	FEA simulation of combined loads to establish the impact of inclusions in steel on fatigue life
Ayodele, Olukayode	Automated Water Treatment System for Residential Boreholes
B
Becker, Thorsten	Fracture behaviour of laser-powder bed fusion produced nickel superalloy
Bekker, Annie	Development of a 2D wagon-track multi-body simulation
Berry, Tarl	Designing Citrus Precooling Laboratory Tunnels Towards Reducing Commercial Chilling Injury
Blaine, Deborah	Effect of selected laser-powder bed fusion parameters on the as-built properties of INCONEL 718
Bokveld, Zamavundle	Diagnosing and investigating mitigation of blockages in inkjet printheads using NDT & CFD
Bredell, Johann	Influence of electric conversion on the rollover safety of a large passenger vehicle
C
Carstens, Lia	A Novel Micron-Accurate Sub-press for Cortical Bone Testing: Calibration, Commissioning and Modulus Measurement for Small Specimens
Ceres, Umar	Aerodynamic Optimisation of a Truck Bumper
Chipanga, Tendai	Quasi-static flexural behaviour of PVC foam core sandwich composite structures
Cilliers, Nicola	Development of a finite volume 1D thermofluid network modelling methodology for the human cardiovascular system
Cloete, Trevor	A Novel Micron-Accurate Sub-press for Cortical Bone Testing: Calibration, Commissioning and Modulus Measurement for Small Specimens
Coetzee, Corne	Designing Citrus Precooling Laboratory Tunnels Towards Reducing Commercial Chilling Injury
D
Daras, Nicholas	A Novel Micron-Accurate Sub-press for Cortical Bone Testing: Calibration, Commissioning and Modulus Measurement for Small Specimens
De Villiers, Andie	Continuum kinematics-inspired peridynamics in Julia: A computational perspective
E
Esmail, Mohammed	Automated Water Treatment System for Residential Boreholes
F
Franz, Thomas	Two-Way Fluid-Structure Interaction Analysis of PEG Hydrogel Flow in Infarcted Myocardium: A Computational Study
G
Giliomee, Francois	Fracture behaviour of laser-powder bed fusion produced nickel superalloy
H
Hoffmann, Je	3D thermal modelling in a low-cost naturally ventilated greenhouse using CFD
I
Ismail, Fareed	Quasi-static flexural behaviour of PVC foam core sandwich composite structures
J
Jama, Bandile	Design and Evaluation of a Single Sensor Coordinate Measuring Machine
K
Kabasele, Jonathan	Modelling of the Rapid Sand Casting
Kleyn, Marli	Designing Citrus Precooling Laboratory Tunnels Towards Reducing Commercial Chilling Injury
L
Lausbcher, Ryno	Development of a finite volume 1D thermofluid network modelling methodology for the human cardiovascular system
M
Mabuwa, Sipokazi	Optimization of friction stir process parameters for AA5083-based composites Experimental correlation between the preset speed and the actual speed in friction stir welding AA6082-T651
Magoda, Cletus	Evaluating water ingress in Nomex honeycomb panels under varying panel orientation Diagnosing and investigating mitigation of blockages in inkjet printheads using NDT & CFD
Malan, Joshua	Refinement of planar biaxial testing apparatus and methodology for mechanical characterization of myocardium
Malatsi, Kamogelo	Hyperelastic and Viscoelastic Characterization and Modelling of Silicone Rubber
Maluleke, Absalom	Two-Way Fluid-Structure Interaction Analysis of PEG Hydrogel Flow in Infarcted Myocardium: A Computational Study
Masango, Thubalakhe	Analysis of the impact of ply count on the failure behaviour of UD-CFRP using continuum shell elements in Ansys Mechanical Composite PrepPost
Mashele, Mishael	Welcome Address from SAIMechE President Keynote Address: The digital SA Agulhas II Flagship for vessel 4.0
Moni, Vuyani	Experimental correlation between the preset speed and the actual speed in friction stir welding AA6082-T651
Msomi, Velaphi	Optimization of friction stir process parameters for AA5083-based composites Experimental correlation between the preset speed and the actual speed in friction stir welding AA6082-T651
Muland, Frank	Automated Water Treatment System for Residential Boreholes
Muribwathoho, Oritonda	Optimization of friction stir process parameters for AA5083-based composites
N
Neaves, Melody	Evaluating Digital Image Correlation Speckle Pattern Quality Using Finite Element Based Displacement Fields Fracture behaviour of laser-powder bed fusion produced nickel superalloy Effect of selected laser-powder bed fusion parameters on the as-built properties of INCONEL 718
Nemraoui, Ouassini	Quasi-static flexural behaviour of PVC foam core sandwich composite structures
Ngoepe, Malebogo	Two-Way Fluid-Structure Interaction Analysis of PEG Hydrogel Flow in Infarcted Myocardium: A Computational Study
Ngonda, Tiyamike	Evaluating water ingress in Nomex honeycomb panels under varying panel orientation Work-Integrated Learning in Mechanical Engineering: Gaining Essential Skills through the Design and Manufacture of a Walkway Platform
Nickerson, Brendon	Development of a 2D wagon-track multi-body simulation
Nofemele, Mihle	Automated Water Treatment System for Residential Boreholes
Nqabisa, Simphiwe	Dynamic FEA to investigate damage to a substrate due to sliding contact
Nyembwe, Kasongo	Modelling of the Rapid Sand Casting Qualification of Rapid Sand Casting
O
Oguntuyi, Samson	Qualification of Rapid Sand Casting
Oliver, Graeme	Introduction of SAIMechE PG Conference Dynamic FEA to investigate damage to a substrate due to sliding contact FEA simulation of combined loads to establish the impact of inclusions in steel on fatigue life Analysis of the impact of ply count on the failure behaviour of UD-CFRP using continuum shell elements in Ansys Mechanical Composite PrepPost Multi-objective optimisation of formula student car electric drivetrain Diagnosing and investigating mitigation of blockages in inkjet printheads using NDT & CFD
Orumwense, Efe	Multi-objective optimisation of formula student car electric drivetrain
Owen, Mike	Designing Citrus Precooling Laboratory Tunnels Towards Reducing Commercial Chilling Injury
P
Perumal, Michael	Development of a 2D wagon-track multi-body simulation
Phukubye, Noko	Evaluating Digital Image Correlation Speckle Pattern Quality Using Finite Element Based Displacement Fields
Pitso Tebele,	Work-Integrated Learning in Mechanical Engineering: Gaining Essential Skills through the Design and Manufacture of a Walkway Platform
Preuss, Dominic	Multi-objective optimisation of formula student car electric drivetrain
R
Raats, Daniel	Influence of electric conversion on the rollover safety of a large passenger vehicle
Ralph, James	The effect of Eppler E423 airfoil wings pitching on motorcycle aerodynamics
Rousseau, Pieter	Development of a finite volume 1D thermofluid network modelling methodology for the human cardiovascular system
S
Sadie, Eugene	Designing Citrus Precooling Laboratory Tunnels Towards Reducing Commercial Chilling Injury
Sebitosi, Ab	3D thermal modelling in a low-cost naturally ventilated greenhouse using CFD
Selialia, Tumelo	A comparative study of cuboid vs. spherical PE4 explosive charges in free air
Sherlyn, Gabriel	A comparative study of cuboid vs. spherical PE4 explosive charges in free air
Smit, Willie	Design, build and test of a novel X-shaped, tilt-wing quadcopter
Stadler, Johan	Continuum kinematics-inspired peridynamics in Julia: A computational perspective
Steeve Chung Kim Yuen,	A comparative study of cuboid vs. spherical PE4 explosive charges in free air
Steyn, Carla	Effect of selected laser-powder bed fusion parameters on the as-built properties of INCONEL 718
Swart, Wayne	An Ilizarov frame study: influence of loading on pretensioned Kirschner wires
T
Taele, Pitso	Analysis of the impact of ply count on the failure behaviour of UD-CFRP using continuum shell elements in Ansys Mechanical Composite PrepPost
Thipe, Ellen Letsogile	3D thermal modelling in a low-cost naturally ventilated greenhouse using CFD
Tjie, Mpho	Work-Integrated Learning in Mechanical Engineering: Gaining Essential Skills through the Design and Manufacture of a Walkway Platform
V
Van der Spuy, S.J.	Aerodynamic Optimisation of a Truck Bumper
van der Westhuizen, Claudia	An Ilizarov frame study: influence of loading on pretensioned Kirschner wires
van Deventer, Dewald	Design, build and test of a novel X-shaped, tilt-wing quadcopter
Vavilov, Vladimir	Evaluating water ingress in Nomex honeycomb panels under varying panel orientation
Venter, Gerhard	Evaluating Digital Image Correlation Speckle Pattern Quality Using Finite Element Based Displacement Fields Hyperelastic and Viscoelastic Characterization and Modelling of Silicone Rubber Influence of electric conversion on the rollover safety of a large passenger vehicle Aerodynamic Optimisation of a Truck Bumper
Venter, Martin	Articulating Drop Foot Orthosis Device Testing Rig
Z
Zapke, Karl	Articulating Drop Foot Orthosis Device Testing Rig

Disclaimer | Powered by EasyChair Smart Program