ICASET 2025: INTERNATIONAL CONFERENCE ON AERONAUTICAL SCIENCES, ENGINEERING AND TECHOLOGY 2025

A
Abbasi, Taimoor	Impact of Temperature on Reynolds Number and Fluid Flow Characteristics
Abdullah, Amir	Influence of Process Parameters on Dimensional Accuracy and Porosity of Additively Manufactured Carbon Fiber Reinforced Polyamide Composite Structures
Abdullah Al Zidi, Aicha Said	Enhancing Drone Object Detection Through Rotational Thumbnail Correction
Abdulrahim, Aljawan	Development of Hybrid Metal Continuous Carbon Fiber Reinforced Composites via Additive Manufacturing for Near Net Shape Products
Adnan, Muhammad	Design Investigation of Continuous Wave Rotating Detonation Engine (RDE) for Sub-Orbital Vehicles
Afzal, Aftab	Deep Learning-Enhanced Autonomous Drone System for High-Precision Aircraft Inspection Enhancing Aerial Surveillance: Designing the 3D Printed Light Weight VTOL Drone Digital Transformation in Aircraft Maintenance: AI for Predictive Analytics and Lifecycle Management":
Ahamed, Niyaz	Fatigue analysis of Al6061 reinforced with silicon carbide composites
Ahmad, Muhammad Ayaz	Influence of Process Parameters on Dimensional Accuracy and Porosity of Additively Manufactured Carbon Fiber Reinforced Polyamide Composite Structures
Ahmad, Rana Fayyaz	SkyScan: Optimized YOLOv5n Architecture with SAHI for Aerial Surveillance
Ahmed, Prof. Faiz	Advanced Heat Sink Materials: Thermal and Mechanical Characterization of Noble Metal-Grafted Graphene Metal Matrix Composites
Ahmed, Shamoon	Higher-Dimensional Governing Structures in Fluid and Elastic Motion
Akhtar, Sunny	Tunable wave transmission in periodic one-dimensional tensegrity architectures
Al Amri, Nasser	Electronic Warfare: Strategic Dominance in Modern Combat
Al Dhafri, Luqman	Deep Learning-Enhanced Autonomous Drone System for High-Precision Aircraft Inspection
Al Dhahli, Hamed	Deep Learning-Enhanced Autonomous Drone System for High-Precision Aircraft Inspection Finite Element Prediction of Residual Stress Field in an Additively Manufactured Aircraft Wing Rib Structure Impact of Temperature on Reynolds Number and Fluid Flow Characteristics Digital Transformation in Aircraft Maintenance: AI for Predictive Analytics and Lifecycle Management":
Al Dhahli, Saleh	Deep Learning-Enhanced Autonomous Drone System for High-Precision Aircraft Inspection
Al Fajri, Mahmood Khamis	Face recognation system in Aviation Workplaces Wearable Health Monitoring for Pilots Using SmartRing for Real-Time Physiological Datawork
Al Ghafri, Adi Salim	Face recognation system in Aviation Workplaces
Al Haddabi, Ahmed	Towards Multi-physics Optimisation of Electrical Machine Housings
Al Mamari, Saif	AI-Enhanced Sustainable Water Treatment: Integrating Vertical Rotating Disc and UV Light
Al Naabi, Omran	Detailed Review of Guidance, Navigation, and Control (GNC) Systems for SSO/LEO Launches AI-Enhanced Sustainable Water Treatment: Integrating Vertical Rotating Disc and UV Light
Al Nairi, Salim	The influence of cutting parameters on Surface roughness in Aluminum Alloy Al5083
Al Namani, Hamad	AI-Enhanced Sustainable Water Treatment: Integrating Vertical Rotating Disc and UV Light
Al Rahbi, Hamed Abdullah	Finite Element Prediction of Residual Stress Field in an Additively Manufactured Aircraft Wing Rib Structure
Al Rubaii, Yasir	Disruptive Morphing Wing Topologies for Enhanced Aerodynamic Performance
Al Saadi, Dr. Fahad	Formative Assessments in the Age of AI: Evaluating Learning Outcomes in Engineering Mathematics
Al Saidi, Khalid	AI-Enhanced Sustainable Water Treatment: Integrating Vertical Rotating Disc and UV Light
Al Saqri, Lukman	Enhancing Aerial Surveillance: Designing the 3D Printed Light Weight VTOL Drone
Al Seyab, Rihab	Physics-Based Digital Twin Simulation for Control System Development in Dynamic Flight and Motion Applications: Demonstrated on a Reusable Launch Vehicle
Al Shibli, Abdullah Hamed Amer	Strategic Assessment of Launch Site Selection in Oman for Low Earth and Sun-Synchronous Orbit Missions
Al Siyabi, Mohamed Aziz Mohamed	Strategic Assessment of Launch Site Selection in Oman for Low Earth and Sun-Synchronous Orbit Missions Optimizing Energy and Water Efficiency in Aircraft Hangars Through High-SEER HVAC Systems and Chilled Condensate Reuse: A Sustainable Design Approach for Arid Regions Developing a Military Airworthiness Regulatory Framework by Bridging Global and Civil Aviation Standards
Al Sukaili, Ibrahim Said	AI-Enhanced Sustainable Water Treatment: Integrating Vertical Rotating Disc and UV Light
Al Yahyaee, Saud	Solution to a Benchmark Control Problem in control design
Al-Fahdi, Abdullah	Carbon-Ferrite Radar-Absorbing Coatings for UAVs: A Scalable Approach to Electromagnetic Signature Suppression and National Defence Enhancement.
Al-Subeihi, Al Haitham	Carbon-Ferrite Radar-Absorbing Coatings for UAVs: A Scalable Approach to Electromagnetic Signature Suppression and National Defence Enhancement.
Alam, A K M Sazzadul	AI-Driven Fault Detection and Health Monitoring in Integrated Modular Avionics for Unmanned Aerial Systems
Alam, Kazi Nabiul	Physics-guided Synthetic CFD Data Generation And Explainable Deep Learning Models for Automated Flow Pattern Classification
Alhems, Luai M.	Aerodynamic Evaluation of Airfoils and Wing Geometries for Unmanned Air Vehicle Applications
Ali, Hafiz Muhammad Asad	Development of a 4-DOF Flight Dynamic Model of a High-Speed Projectile Using Wind Tunnel Testing
Ali, Hassan	Utilization of Advanced 3D Printing Techniques in the Design and Fabrication of a UAV
Ali, Reza	Response of Spring-Mounted Wing System to Increased Airflow using Various Spring Constants
Ali, Saad	Advanced Heat Sink Materials: Thermal and Mechanical Characterization of Noble Metal-Grafted Graphene Metal Matrix Composites
Ali, Shazeb	Design Investigation of Continuous Wave Rotating Detonation Engine (RDE) for Sub-Orbital Vehicles
Alsiyabi, Ammar	Development of fire extinguishing in Aerodrome using UAV
Alwashahi, Said	Developing a Military Airworthiness Regulatory Framework by Bridging Global and Civil Aviation Standards
Anilir, Berkan	Flow Physics over SD7062 Airfoil at Low-to-Moderate Reynolds Numbers
Arif, Irsalan	Development of a 4-DOF Flight Dynamic Model of a High-Speed Projectile Using Wind Tunnel Testing
Arif, Muhammad Irsalan	Survey Followed by Experimental and Computational Study on Standard Objects to Understand Supersonic Flow Behaviour
Arif, Salman	Industrial Assessment of No Fault Found (NFF) Phenomena, identification of lean wastes and solution through Soft Lean Practices in Aviation MRO
Ashraf, Muhammad Arif	Application of Archimedes Wind Turbine in Power Generation Systems to Support Sustainability in Airports Design and Multi-Objective Optimization of Micro Gas Turbine Combustor for Compact Turbogenerator Applications
Aslan, Nebi Can	The Effect of Chemical Mechanisms on Rotating Detonation Combustor
Ayatollahi, Majid R.	An innovative crack tip hole drilling technique for fatigue crack growth retardation in metallic structures
Azeiz, Jameel Ahmed	UAV-Enabled Wireless Networks for 6G and IIoT: A Review
B
Babaa, Saleh	Foreign Object Debris in Aviation: Risks, Current Mitigation Strategies, and Technological Innovations
Bagheri Zadeh, Pooneh	Physics-guided Synthetic CFD Data Generation And Explainable Deep Learning Models for Automated Flow Pattern Classification
Bandula, Kariya Wassam	Developing a Military Airworthiness Regulatory Framework by Bridging Global and Civil Aviation Standards
Baqai, Aamer Ahmed	Leveraging Smart Maintenance using Novel Framework in the perspective of Industry 4.0 in Aircraft Manufacturing Sector of Pakistan
Bari, Inam	Foreign Object Debris in Aviation: Risks, Current Mitigation Strategies, and Technological Innovations
Basak, Chaity	AI-Driven Fault Detection and Health Monitoring in Integrated Modular Avionics for Unmanned Aerial Systems
Batool, Syeda Aemen	Real Time Tracking and Weather monitoring device for outdoor activities
Bin Mazhar, Ossama	Factors Affecting the Interlayer Adhesion of a Functionally Graded Materials Fabricated using Fused Deposition Modeling
Blessing N.R, Wilfred	Enhancing Drone Object Detection Through Rotational Thumbnail Correction
Booker, Julian	Towards Multi-physics Optimisation of Electrical Machine Housings
Boubaker, Sahbi	Advanced Air Mobility Safety Challenges: Case Study on Visual SLAM for Enhanced Navigation in Unmanned Avia-tion Integration
Buick, James	Response of Spring-Mounted Wing System to Increased Airflow using Various Spring Constants
C
Chaudhry, Imran Ali	Experimental and Analytical Analysis of Friction Roughness and Head Loss in PPRC Pipes Experimental, Numerical & Analytical Verification of Boundary Layer Characteristics over an Aerofoil
Coyle, Eugene	Results achieved from installation of a PV solar system at a domestic property in Ireland.
D
Daoui, Tassadit	Ultrasonic Tightening Assessment of Preloaded Bolted Joints: Comparative Study of Relative Tension Monitoring and Absolute Measurement via EMAT/Piezoelectric Coupling
Delgado-Pamanes, Miguel	Computational aerodynamic study on the effects of winglet integration in a UAV design
Desilva, Sharika	Foreign Object Debris in Aviation: Risks, Current Mitigation Strategies, and Technological Innovations Driving Domestic Airline Growth: The Combined Impact of Regulatory Alignment and Aviation Technology Developing a Military Airworthiness Regulatory Framework by Bridging Global and Civil Aviation Standards
DeSilva, Thushara	Driving Domestic Airline Growth: The Combined Impact of Regulatory Alignment and Aviation Technology
Dhanraj, Dr. Susitra	Spiral Optimization-Based Framework for Minimizing Carbon Emissions and Energy Costs in Electric Vehicle Recharging Stations
Doddamani, Saleemsab	Fatigue analysis of Al6061 reinforced with silicon carbide composites
Doğru, Mert	Modeling and Validation of Transitional Flow Behavior in Two-Dimensional Geometries via Open-Source CFD
E
Erikli, H. Metin	Propulsive Property Prediction Utilizing Neural Networks with Varying Geometry Inputs
Eşdur, Merve	Investigation of Propeller Performance Using QBlade: A Benchmark Study
F
Farooq, Muhammad Umar	Effect of Interlayer Thickness on the Weld Quality of Ti-6Al-4V and Stainless Steel in Automated P-GTAW Development of Reverse Engineering Framework for Metallic Engine Parts: Case Study on a Titanium Based Fuel Pump Impeller and SS-304 Washer
Fernando, Chandimal	Development of fire extinguishing in Aerodrome using UAV Developing a Military Airworthiness Regulatory Framework by Bridging Global and Civil Aviation Standards
Freeman, Chris	Evaluating the Feasibility of Chaos-Based Guidance Systems in Swarm Projectiles
Furqan, Muhammad	Experimental, Numerical & Analytical Verification of Boundary Layer Characteristics over an Aerofoil
G
G, Hareesha	Fatigue analysis of Al6061 reinforced with silicon carbide composites
Garcia-Salazar, Octavio	Computational aerodynamic study on the effects of winglet integration in a UAV design
Gardezi, Yousha	Experimental and Analytical Analysis of Friction Roughness and Head Loss in PPRC Pipes
Garza, Carlos	Computational aerodynamic study on the effects of winglet integration in a UAV design
Giasin, Khaled	The influence of cutting parameters on Surface roughness in Aluminum Alloy Al5083
Golcuk, Ali Ihsan	Numerical Investigation of NACA 64A-204 Airfoil Performance at Subsonic and Supersonic Regimes
Goli, Srikanth	Aerodynamic Evaluation of Airfoils and Wing Geometries for Unmanned Air Vehicle Applications
Gonzalez, Vanessa	Computational aerodynamic study on the effects of winglet integration in a UAV design
Gul, Dr. Waheed	Utilization of Advanced 3D Printing Techniques in the Design and Fabrication of a UAV
Güleren, Kürşad Melih	The Effect of Chemical Mechanisms on Rotating Detonation Combustor
Güngördü, Barış	Performance Comparison of Flexible vs. Rigid Flaps in Aerodynamic Drag Reduction on the Ahmed Body
H
Haider, Prof Waseem	Machine Learning in Additive Manufacturing
Hail al Madhagy, Mohammed Taufiq	Enhancing Drone Object Detection Through Rotational Thumbnail Correction
Hamayat, Faizan	SkyScan: Optimized YOLOv5n Architecture with SAHI for Aerial Surveillance
Hameed, Shahul	Enhancing Drone Object Detection Through Rotational Thumbnail Correction
Hannachi, Salah	AI-Driven Hydrogen Fuel Cell Life Prediction for Optimizing Renewable Energy Usage in Next-Generation Aviation Systems
Hashmi, Ahmed Mujtaba	Evaluation of Improvement in Supply Chain Efficiency Using Blockchain Technology in Aviation Industry
Hayat, Dr. Imran	Wall Modeled Large Eddy Simulations of Non-equilibrium Turbulent Boundary Layers
Herraprastanti, Eva Hertnacahyani	Application of Archimedes Wind Turbine in Power Generation Systems to Support Sustainability in Airports
Hoblos, Jazzar	Ultrasonic Tightening Assessment of Preloaded Bolted Joints: Comparative Study of Relative Tension Monitoring and Absolute Measurement via EMAT/Piezoelectric Coupling
Hoole, Josh	Towards Multi-physics Optimisation of Electrical Machine Housings
Hossain, Mohammad Sayeed	Finite Element Prediction of Residual Stress Field in an Additively Manufactured Aircraft Wing Rib Structure Electronic Warfare: Strategic Dominance in Modern Combat Enhancing fatigue resistance in aerospace materials through shot peening-induced compressive residual stresses AI-Enhanced Sustainable Water Treatment: Integrating Vertical Rotating Disc and UV Light Disruptive Morphing Wing Topologies for Enhanced Aerodynamic Performance
Hussain, Tariq	Foreign Object Debris in Aviation: Risks, Current Mitigation Strategies, and Technological Innovations Formative Assessments in the Age of AI: Evaluating Learning Outcomes in Engineering Mathematics
I
Imran, Imil Hamda	Aerodynamic Evaluation of Airfoils and Wing Geometries for Unmanned Air Vehicle Applications
Iqbal, Ali	Effect of Interlayer Thickness on the Weld Quality of Ti-6Al-4V and Stainless Steel in Automated P-GTAW Exact Optimization Framework for Storage Space of Hazardous Materials Influence of Process Parameters on Dimensional Accuracy and Porosity of Additively Manufactured Carbon Fiber Reinforced Polyamide Composite Structures Optimization of Integrated Flight and Maintenance Planning for Military Aircraft Development of Reverse Engineering Framework for Metallic Engine Parts: Case Study on a Titanium Based Fuel Pump Impeller and SS-304 Washer
Iqbal, Farrukh	Experimental, Numerical & Analytical Verification of Boundary Layer Characteristics over an Aerofoil
Irtaza, Syed Ali	SkyScan: Optimized YOLOv5n Architecture with SAHI for Aerial Surveillance
Islam, Md Saiful	AI-Driven Fault Detection and Health Monitoring in Integrated Modular Avionics for Unmanned Aerial Systems
J
Jamal, Faheem Qaiser	A System-Based Investigation of Human Error: The Influence of Latent Performance Shaping Factors in Military Aviation Maintenance Exact Optimization Framework for Storage Space of Hazardous Materials
Javaid, Arsalan	Process-Induced Defects in Friction Stir Additive Manufacturing : Mechanisms, Detection and Mitigation
Javaid, Muhammad Aamir	Development of a 4-DOF Flight Dynamic Model of a High-Speed Projectile Using Wind Tunnel Testing
Javed, Sarmad	Design Investigation of Continuous Wave Rotating Detonation Engine (RDE) for Sub-Orbital Vehicles
Jawad, Muhammad	Effect of Interlayer Thickness on the Weld Quality of Ti-6Al-4V and Stainless Steel in Automated P-GTAW
K
K, Sainadh Singh	Enhancing Power Quality in EV Charging Systems: A Fuzzy Logic-Based Control Strategy for Isolated Multi-Port Converters with Reduced THD
Kaleemulla, Mohammed	Fatigue analysis of Al6061 reinforced with silicon carbide composites
Kamal, Dr. Khurram	Design and Multi-Objective Optimization of Micro Gas Turbine Combustor for Compact Turbogenerator Applications
Kannangara, Nimasha	Driving Domestic Airline Growth: The Combined Impact of Regulatory Alignment and Aviation Technology
Kara, Emre	The Effect of Chemical Mechanisms on Rotating Detonation Combustor Numerical analysis of an optimised loudspeaker driven synthetic jet actuator Design and utilization of a low-cost PIV system
Karimulla, Syed	Experimental Investigation on Solar Panels to Enhance Output Power by Using Organic Phase Change Materials in Sultanate of Oman Optimized Control Strategy for Grid-Connected PV Inverters: A Performance Study Using Hybrid Moth Flame Optimizer & Dragonfly Algorithm Enhancing Power Quality in EV Charging Systems: A Fuzzy Logic-Based Control Strategy for Isolated Multi-Port Converters with Reduced THD
Khaleeq Uz Zaman, Uzair	Leveraging Smart Maintenance using Novel Framework in the perspective of Industry 4.0 in Aircraft Manufacturing Sector of Pakistan
Khalfa, Mohamed Abdellatif	AI-Driven Hydrogen Fuel Cell Life Prediction for Optimizing Renewable Energy Usage in Next-Generation Aviation Systems
Khalid, Laraib	SkyScan: Optimized YOLOv5n Architecture with SAHI for Aerial Surveillance
Khan, Absar	Conceptual Design of a Fixed-Wing UAV for Exploration of Titan
Khan, Adeel	Optimization of Integrated Flight and Maintenance Planning for Military Aircraft
Khan, Dr. Abid Ali	Detailed Review of Guidance, Navigation, and Control (GNC) Systems for SSO/LEO Launches Electronic Warfare: Strategic Dominance in Modern Combat Strategic Assessment of Launch Site Selection in Oman for Low Earth and Sun-Synchronous Orbit Missions Advanced Heat Sink Materials: Thermal and Mechanical Characterization of Noble Metal-Grafted Graphene Metal Matrix Composites Foreign Object Debris in Aviation: Risks, Current Mitigation Strategies, and Technological Innovations Strategic Space Autonomy for Nascent Space Powers: A Case Study of Pakistan’s Space Program Optimizing Energy and Water Efficiency in Aircraft Hangars Through High-SEER HVAC Systems and Chilled Condensate Reuse: A Sustainable Design Approach for Arid Regions Driving Domestic Airline Growth: The Combined Impact of Regulatory Alignment and Aviation Technology Developing a Military Airworthiness Regulatory Framework by Bridging Global and Civil Aviation Standards Thermochemical Investigation of Di-Lead SQ-2 Propellant for RATO-UAV Operations Experimental and Analytical Analysis of Friction Roughness and Head Loss in PPRC Pipes Experimental, Numerical & Analytical Verification of Boundary Layer Characteristics over an Aerofoil Design and Multi-Objective Optimization of Micro Gas Turbine Combustor for Compact Turbogenerator Applications Smart Flow Control: Delaying Boundary Layer Separation with Self-Actuating Ram Air Scoops Hybrid Optimization Approaches for Line Maintenance Scheduling: A 20-Year Review Focused on Turnaround Efficiency in Low-Cost Airlines
Khan, Eng.Shahid Ali	Optimizing Energy and Water Efficiency in Aircraft Hangars Through High-SEER HVAC Systems and Chilled Condensate Reuse: A Sustainable Design Approach for Arid Regions
Khan, Haris Ali	Process-Induced Defects in Friction Stir Additive Manufacturing : Mechanisms, Detection and Mitigation Factors Affecting the Interlayer Adhesion of a Functionally Graded Materials Fabricated using Fused Deposition Modeling Development of Reverse Engineering Framework for Metallic Engine Parts: Case Study on a Titanium Based Fuel Pump Impeller and SS-304 Washer
Khan, Muhammad Umair	Wind Tunnel Testing of an Aerial Platform at Wide Range of Angles of Attack and Angles of Sideslip
Khozaei Ravari, Dr Fatemeh	Multi-MLP Neural-Implicit SLAM for Real-Time UAV Inspection in Dynamic Aviation Environments
Khurshid, Khurram	UAV-Enabled Wireless Networks for 6G and IIoT: A Review
Knight, Jason	Response of Spring-Mounted Wing System to Increased Airflow using Various Spring Constants
Korai, Muhammad Safar	Application of Archimedes Wind Turbine in Power Generation Systems to Support Sustainability in Airports
Kouser, Taiba	Aerodynamic Evaluation of Airfoils and Wing Geometries for Unmanned Air Vehicle Applications
Kumar, Arun	Fatigue analysis of Al6061 reinforced with silicon carbide composites
Kurtulus, Dilek Funda	Numerical Investigation of NACA 64A-204 Airfoil Performance at Subsonic and Supersonic Regimes Flow Physics over SD7062 Airfoil at Low-to-Moderate Reynolds Numbers IMPACT OF STRUCTURAL MATERIAL PROPERTIES ON THE AEROELASTIC RESPONSE AND AERODYNAMIC EFFICIENCY OF A WING Propulsive Property Prediction Utilizing Neural Networks with Varying Geometry Inputs
Kurtuluş, Dilek Funda	Aerodynamic Evaluation of Airfoils and Wing Geometries for Unmanned Air Vehicle Applications
Kurtuluş, Dilek Funda	Investigation of Propeller Performance Using QBlade: A Benchmark Study
Kutlu, Mustafa	Evaluating the Feasibility of Chaos-Based Guidance Systems in Swarm Projectiles AI-Driven Fault Detection and Health Monitoring in Integrated Modular Avionics for Unmanned Aerial Systems
L
Lankathilake, Hm Lalith Sameera	Human Dimension of Cybersecurity and Aviation Safety
Lewis, Andrew	Response of Spring-Mounted Wing System to Increased Airflow using Various Spring Constants
M
Maleque, Prof Md Abdul	Graphene Oxide-eSiC Hybrid Coating Development – A Liquid Additive Manufacturing Approach
Manai, Lazhar	AI-Driven Hydrogen Fuel Cell Life Prediction for Optimizing Renewable Energy Usage in Next-Generation Aviation Systems
Masood, Yasir	Integration of Human Factors Analysis and Safety Management Systems in Aviation Maintenance: A Multi-Dimensional Approach to Error Reduction
Mchara, Walid	AI-Driven Hydrogen Fuel Cell Life Prediction for Optimizing Renewable Energy Usage in Next-Generation Aviation Systems
Mehmood, Zubair	Experimental and Analytical Analysis of Friction Roughness and Head Loss in PPRC Pipes
Memon, Azhar M.	Aerodynamic Evaluation of Airfoils and Wing Geometries for Unmanned Air Vehicle Applications
Meskine, Walid	Advanced Air Mobility Safety Challenges: Case Study on Visual SLAM for Enhanced Navigation in Unmanned Avia-tion Integration
Miah, Dr Md Salim	AI-Enhanced Sustainable Water Treatment: Integrating Vertical Rotating Disc and UV Light
Mustafa, Huzaifa	Strategic Space Autonomy for Nascent Space Powers: A Case Study of Pakistan’s Space Program Thermochemical Investigation of Di-Lead SQ-2 Propellant for RATO-UAV Operations
Mutlu, Hasan	IMPACT OF STRUCTURAL MATERIAL PROPERTIES ON THE AEROELASTIC RESPONSE AND AERODYNAMIC EFFICIENCY OF A WING
Mylonas, Georgios	Enhancing fatigue resistance in aerospace materials through shot peening-induced compressive residual stresses
N
Naping, Rosmia	Graphene Oxide-eSiC Hybrid Coating Development – A Liquid Additive Manufacturing Approach
Naqvi, Syed Muhammad Ali	Thermochemical Investigation of Di-Lead SQ-2 Propellant for RATO-UAV Operations
Naseer, Bushra	Real Time Tracking and Weather monitoring device for outdoor activities
Nauman, Muhammad	Leveraging Smart Maintenance using Novel Framework in the perspective of Industry 4.0 in Aircraft Manufacturing Sector of Pakistan
Nawaz, Omair	A System-Based Investigation of Human Error: The Influence of Latent Performance Shaping Factors in Military Aviation Maintenance
P
Patel, Jay	Response of Spring-Mounted Wing System to Increased Airflow using Various Spring Constants
Pathirana, Malka	Driving Domestic Airline Growth: The Combined Impact of Regulatory Alignment and Aviation Technology
Pehlivan, Düriye Dünya	Performance Comparison of Flexible vs. Rigid Flaps in Aerodynamic Drag Reduction on the Ahmed Body
Peter, Dr. Antony Kishore	Formative Assessments in the Age of AI: Evaluating Learning Outcomes in Engineering Mathematics
Pradeep Surendranath, Jessy	Spiral Optimization-Based Framework for Minimizing Carbon Emissions and Energy Costs in Electric Vehicle Recharging Stations
Prouse-Edwards, Harry	Response of Spring-Mounted Wing System to Increased Airflow using Various Spring Constants
Q
Qamar, Prof Zahid	Sustainability Issues in Materials and Manufacturing Engineering
Qureshi, Dr. Muhammad Nauman	Detailed Review of Guidance, Navigation, and Control (GNC) Systems for SSO/LEO Launches Strategic Assessment of Launch Site Selection in Oman for Low Earth and Sun-Synchronous Orbit Missions Smart Flow Control: Delaying Boundary Layer Separation with Self-Actuating Ram Air Scoops
Qureshi, Muhammad Hasnain	Development of a 4-DOF Flight Dynamic Model of a High-Speed Projectile Using Wind Tunnel Testing
Qureshi, Muhammad Talha	Conceptual Design of a Fixed-Wing UAV for Exploration of Titan
R
Raissi, Monia	AI-Driven Hydrogen Fuel Cell Life Prediction for Optimizing Renewable Energy Usage in Next-Generation Aviation Systems
Rajakaruna, Dr Shanaka	Airworthiness Safety Management Systems (SMS) and the Role of Logistics in Military Aviation: A Case Study Analysis
Rebai, Habib	Advanced Air Mobility Safety Challenges: Case Study on Visual SLAM for Enhanced Navigation in Unmanned Avia-tion Integration
Rehman, Naveed	Industrial Assessment of No Fault Found (NFF) Phenomena, identification of lean wastes and solution through Soft Lean Practices in Aviation MRO
Reyes-Osorio, Luis	Computational aerodynamic study on the effects of winglet integration in a UAV design
Riaz, Anam	Impact of Temperature on Reynolds Number and Fluid Flow Characteristics
Rodrigo, Dr. Warnakulasooriya Thusitha	Hybrid Optimization Approaches for Line Maintenance Scheduling: A 20-Year Review Focused on Turnaround Efficiency in Low-Cost Airlines
Rodríguez, Carlos Garza	Finite Element Prediction of Residual Stress Field in an Additively Manufactured Aircraft Wing Rib Structure
Roshan, Shanza	Design Investigation of Continuous Wave Rotating Detonation Engine (RDE) for Sub-Orbital Vehicles
Rudaab, Muhammad Ali	Survey Followed by Experimental and Computational Study on Standard Objects to Understand Supersonic Flow Behaviour
S
Saeed, Muhammad Ahsan	Exact Optimization Framework for Storage Space of Hazardous Materials
Safdar, Shakeel	Process-Induced Defects in Friction Stir Additive Manufacturing : Mechanisms, Detection and Mitigation Factors Affecting the Interlayer Adhesion of a Functionally Graded Materials Fabricated using Fused Deposition Modeling Influence of Process Parameters on Dimensional Accuracy and Porosity of Additively Manufactured Carbon Fiber Reinforced Polyamide Composite Structures Optimization of Integrated Flight and Maintenance Planning for Military Aircraft
Sajjad, Ahmad	Effect of Interlayer Thickness on the Weld Quality of Ti-6Al-4V and Stainless Steel in Automated P-GTAW Exact Optimization Framework for Storage Space of Hazardous Materials Industrial Assessment of No Fault Found (NFF) Phenomena, identification of lean wastes and solution through Soft Lean Practices in Aviation MRO
Saleem, Wasiq	Effect of Interlayer Thickness on the Weld Quality of Ti-6Al-4V and Stainless Steel in Automated P-GTAW Development of Reverse Engineering Framework for Metallic Engine Parts: Case Study on a Titanium Based Fuel Pump Impeller and SS-304 Washer
Sarosh, Ali	Strategic Space Autonomy for Nascent Space Powers: A Case Study of Pakistan’s Space Program Thermochemical Investigation of Di-Lead SQ-2 Propellant for RATO-UAV Operations Design Investigation of Continuous Wave Rotating Detonation Engine (RDE) for Sub-Orbital Vehicles
Shahzad, Asim	Development of Hybrid Metal Continuous Carbon Fiber Reinforced Composites via Additive Manufacturing for Near Net Shape Products
Shahzad, Mustafa	Advanced Heat Sink Materials: Thermal and Mechanical Characterization of Noble Metal-Grafted Graphene Metal Matrix Composites
Shaik, Khasimvali	Smart Flow Control: Delaying Boundary Layer Separation with Self-Actuating Ram Air Scoops
Shams, Babar	Impact of Temperature on Reynolds Number and Fluid Flow Characteristics Experimental and Analytical Analysis of Friction Roughness and Head Loss in PPRC Pipes Experimental, Numerical & Analytical Verification of Boundary Layer Characteristics over an Aerofoil The Critical Role of Safety Culture in Modern Aircraft Maintenance : Strategies and Implementation Challenges
Shams, Taimur Ali	Wind Tunnel Testing of an Aerial Platform at Wide Range of Angles of Attack and Angles of Sideslip A System-Based Investigation of Human Error: The Influence of Latent Performance Shaping Factors in Military Aviation Maintenance Effect of Interlayer Thickness on the Weld Quality of Ti-6Al-4V and Stainless Steel in Automated P-GTAW Survey Followed by Experimental and Computational Study on Standard Objects to Understand Supersonic Flow Behaviour Impact of Temperature on Reynolds Number and Fluid Flow Characteristics Exact Optimization Framework for Storage Space of Hazardous Materials Process-Induced Defects in Friction Stir Additive Manufacturing : Mechanisms, Detection and Mitigation Factors Affecting the Interlayer Adhesion of a Functionally Graded Materials Fabricated using Fused Deposition Modeling Influence of Process Parameters on Dimensional Accuracy and Porosity of Additively Manufactured Carbon Fiber Reinforced Polyamide Composite Structures Optimization of Integrated Flight and Maintenance Planning for Military Aircraft Experimental and Analytical Analysis of Friction Roughness and Head Loss in PPRC Pipes Development of a 4-DOF Flight Dynamic Model of a High-Speed Projectile Using Wind Tunnel Testing Experimental, Numerical & Analytical Verification of Boundary Layer Characteristics over an Aerofoil Development of Reverse Engineering Framework for Metallic Engine Parts: Case Study on a Titanium Based Fuel Pump Impeller and SS-304 Washer
Shanmugam, Logesh	Development of Hybrid Metal Continuous Carbon Fiber Reinforced Composites via Additive Manufacturing for Near Net Shape Products
Sheikh-Akbari, Akbar	Physics-guided Synthetic CFD Data Generation And Explainable Deep Learning Models for Automated Flow Pattern Classification
Solakoğlu, Erhan	Modeling and Validation of Transitional Flow Behavior in Two-Dimensional Geometries via Open-Source CFD Propulsive Property Prediction Utilizing Neural Networks with Varying Geometry Inputs
Steffi, S	Enhancing Drone Object Detection Through Rotational Thumbnail Correction
Sunny, Mohammed Rabius	Tunable wave transmission in periodic one-dimensional tensegrity architectures
Syed, Junaid	UAV-Enabled Wireless Networks for 6G and IIoT: A Review
T
T, Rajendran	Enhancing Drone Object Detection Through Rotational Thumbnail Correction
Tasneem, Muhammad Haseeb	SkyScan: Optimized YOLOv5n Architecture with SAHI for Aerial Surveillance
Tehami, Waqar	Influence of Process Parameters on Dimensional Accuracy and Porosity of Additively Manufactured Carbon Fiber Reinforced Polyamide Composite Structures
Teimoori, A.	An innovative crack tip hole drilling technique for fatigue crack growth retardation in metallic structures
Thomas, Pradeep	Spiral Optimization-Based Framework for Minimizing Carbon Emissions and Energy Costs in Electric Vehicle Recharging Stations
Toker, Emircan	Design and utilization of a low-cost PIV system
Turhan, Sinan	Numerical analysis of an optimised loudspeaker driven synthetic jet actuator
U
Uddin, Moiz	Conceptual Design of a Fixed-Wing UAV for Exploration of Titan
Ul Islam, Dr. Qamar	Multi-MLP Neural-Implicit SLAM for Real-Time UAV Inspection in Dynamic Aviation Environments
Ullah, Muhammad Ehsan	Integration of Human Factors Analysis and Safety Management Systems in Aviation Maintenance: A Multi-Dimensional Approach to Error Reduction
Ullah, Saif	Exact Optimization Framework for Storage Space of Hazardous Materials
Umer, Muhammad	Optimization of Integrated Flight and Maintenance Planning for Military Aircraft
Upul Atukorala, Nalaka	The Critical Role of Safety Culture in Modern Aircraft Maintenance : Strategies and Implementation Challenges Hybrid Optimization Approaches for Line Maintenance Scheduling: A 20-Year Review Focused on Turnaround Efficiency in Low-Cost Airlines
V
Virk, Prof Muhammad Shakeel	In-cloud Icing Effects on Drone’s Design and Operations
W
W. Baur, Jeff	Development of Hybrid Metal Continuous Carbon Fiber Reinforced Composites via Additive Manufacturing for Near Net Shape Products
Williams, Rory	Physics-Based Digital Twin Simulation for Control System Development in Dynamic Flight and Motion Applications: Demonstrated on a Reusable Launch Vehicle
Y
Yaman, Yavuz	Aircraft Structural Dynamics and Aeroelasticity Approaches: Recent Contributions from the Aerospace Engineering of Middle East Technical University, Turkey.
Z
Zaidi, Syed Muthar Ali	Conceptual Design of a Fixed-Wing UAV for Exploration of Titan
Zia, Qamar	A System-Based Investigation of Human Error: The Influence of Latent Performance Shaping Factors in Military Aviation Maintenance
Zubair, Syed	SkyScan: Optimized YOLOv5n Architecture with SAHI for Aerial Surveillance

Disclaimer | Powered by EasyChair Smart Program