EMMC19: 19TH EUROPEAN MECHANICS OF MATERIALS CONFERENCE

A
Abdesselam, K.Abdellah	ID:442- In-process alteration of Ti6Al4V microstructure during additive manufacturing ID:485-Decoupling elastic and thermal strains in operando X-ray diffraction measurements in directed energy deposition additive manufacturing using fast numerical strategy
Abdolazizi, Kian P.	ID:517-Viscoelastic Constitutive Artificial Neural Networks (vCANNs) - a framework for data-driven anisotropic nonlinear finite viscoelasticity
Abdusalamov, Rasul	ID:44-Modeling of Softening Behavior by Deep Symbolic Regression
Abed-Meraim, Farid	ID:103-Ductility limit predictions for porous materials using a damage coupled CPFEM approach
Abedi, Reza	ID:560-Reduced order modeling of dynamics of cellular low-frequency resonant metamaterials for design and optimization
Abedul, David	ID:595- Optimization of Easy Open Ends for Food Can Packaging: A Comprehensive Material Analysis Approach
Abendroth, Martin	ID:102-Data-driven simulation of the inelastic behavior of open-cell foam structures ID:219- Characterization of the creep behavior of the nickel-based superalloy 2.4842 utilizing miniature testing techniques and numerical investigations
Abramian, Anaïs	ID:343-Fracture initiation in a cohesive granular layer
Abramian, Anaïs	ID:258-Elasto-granular coupling : how a granular heap deforms a soft substrate
Acito, Vito	ID:419-Comprehensive investigation of a sphere on plane contact using In Situ X-Ray Computed Tomography
Adda-Bedia, Mokhtar	ID:316-Unraveling the Dynamics of Supershear Mode I Crack Growth ID:355-Crack tip kinematics reveal the process zone structure in brittle hydrogel fracture
Adda-Bedia, Mokhtar	ID:150-Delamination from an adhesive sphere: Curvature-induced dewetting versus buckling
Adlakha, Ilaksh	ID:251-Local Strain Prediction of single phase polycrystalline materials with low-Rank Approximation. ID:13-Effect of hydrogen on plasticity of α-Fe: a multi-scale assessment
Adrien, Jerome	ID:110-Stereo X Ray tomography for high temporal resolution experiments ID:419-Comprehensive investigation of a sphere on plane contact using In Situ X-Ray Computed Tomography
Agniman, Kablan	ID:271-Study of the compressive behavior of polymer cable in a rubber matrix
Aguiar Teixeira, Camila	ID:478-Understanding twinning mechanisms and measuring twinning stress of CoCrFeNiMn high entropy alloy using micro-mechanical testing
Aguilar, Carlos	ID:425-Laser powder bed fusion of NiTi alloy parts for cardiovascular applications
Aimedieu, Patrick	ID:482-Micromechanical study of synthetic rock salt by X-ray µCT in situ triaxial tests
Akkerman, Remko	ID:175-Modelling of Recycled Fibre-Reinforced Polymer Composites
Al Kotob, Moubine	ID:248-Influence of yield surface on stress redistribution and strain localization in a flat notched sample for turbine disk application
Al Kotob, Moubine	ID:283-Finite element simulations of jerky flow in nickel-based superalloy IN718
Alabort, Enrique	ID:130-Influence of processing defects on the mechanical performance of additively manufactured titanium cellular materials
Alam, Parvez	ID:40-Energetics of Mixed-Mode Crack Propagation around Geometric Discontinuities on Thick Composite Structures ID:21-The stab resistance of Bombyx mori silk cocoons ID:37-The design of lightweight geared mechanical metamaterials optimised for elastic strain energy absorption ID:46-The stab resistance of SLA printed porous Bouligand structured polymer
Alavi, S.E.	ID:601-Analysis of surface effects based on first and second strain gradient mechanics
Albertini, Frédéric	ID:290-Mechanical behavior of elastomeric bistable dome shell with tunable energy barrier asymmetry
Alcalá, Germán	ID:459-Retained Austenite in Advanced Steels: An experimentally-informed DAMASK Crystal plasticity analysis
Alessandretti, Laura	ID:243-Efficient prediction of strain localisation and limit load in heterogeneous solids via upper bound limit analysis
Alexandre, Peroche	ID:140-The contribution of infrared thermography to impact testing at low and high velocities
Alexis, Florent	ID:599-Fatigue resistance of chemically pre-aged Short Fiber Reinforced Polyamides
Alfayad, Samer	ID:07-Study of the thermal mechanical coupling effect of a lattice core glass fiber epoxy composite sandwich
Ali, Wahaaj	ID:96-Phase field model of chemo-electro-mechanical processes during corrosion of bioabsorbable Mg alloys for biomedical applications
Alkorta, Jon	ID:384-Micro-scale Characterisation of Residual Stresses Generated during Face Turning using Focused Ion Beam Milling and Digital Image Correlation
Alkorta, Jon	ID:396-Modelling the elastic-viscoplastic behaviour during presureless sintering of 17/4PH steel parts obtained by Binder Jetting
Alonso, Carlos	ID:282-The influence of matrix and fibers on the mechanical response of recycled fiber-reinforced polymer composites from aeronautic sector
Alonso Almirall, Oscar	ID:90-Development of adaptative printing parameters for enhanced productivity of L-PBF printed AlSi10Mg
Alonso Aruffo, Gweni	ID:114-Experimental and numerical investigations of structural inhomogeneity of pharmaceutical compacts
Altuntas, Umut	ID:472-Bioinspired Soft-Hard Interfaces Fabricated by Multi-material Additive Manufacturing: A Fracture Mechanics Investigation using Essential Work of Fracture
Alvarez, Cristian	ID:493- In-situ thermal monitoring during direct energy deposition: the links between process parameters, thermal cycles and microstructures
Alvarez-Feito, Diego	ID:528-Experimental study of micro-vascular networks embedded in carbon composites for High Energy Physics applications submitted to internal pressure
Amacher, Robin	ID:589- Experimental Characterisation of Notch non-Linearities in Pseudo-Ductile Composite Laminates
Amarsid, Lhassan	ID:557- Influence of microstructure and interlocking on mechanical behavior of agglomerates of hexapod-shaped particles ID:595-Macro-elasticity of granular materials composed of polyhedral particles
Ameur, Mohamed Fayçal	ID:524-Experimental and numerical investigation of the inter-laminar shear behavior of flax/epoxy composite laminate
Amini, Seyedshoja	ID:537-Twin branching in shape memory alloys: a 1D continuum model accounting for the energy dissipation effects
Amiot, Fabien	ID:237-An imaging technique for the strain-engineering of deformable electrodes
Amirkhizi, Alireza	ID:560-Reduced order modeling of dynamics of cellular low-frequency resonant metamaterials for design and optimization
Amjad, Nabeel	ID:578-Effect of Fiber-Fiber Adhesion on the Mechanics of Network Materials
Ammar, Kais	ID:99-Deformation modes and damage mechanisms of a basal-textured ZnAlMg coating under multiaxial loading
Ammar, Kais	ID:568-Phase-field Cosserat Crystal Plasticity Towards Modelling Nucleation In Recrystallization ID:342-Macroscopic intermittent plasticity model by avalanches
Amouzou-Adoun, Yaovi Armand	ID:128-Flexible strain-gradient crystal plasticity models : towards comprehensive modeling of size effects. ID:287-Parallel versus series decomposition in modeling higher-order effects in gradient-enhanced plasticity theories
Andena, Luca	ID:38-Image-based finite element method applied to in-situ x-ray tomography compression tests of open cell polymeric foams
Andrey, Smirnov	ID:226-The Stability of Hollow Multiply Twinned Particles within the Principles of the Irreversible Thermodynamics
Andric, Predrag	ID:153-Mechanistic origin of screw dislocation strengthening by interstitials in advanced high-strength steels
Andriollo, Tito	ID:243-Efficient prediction of strain localisation and limit load in heterogeneous solids via upper bound limit analysis
Antkowiak, Arnaud	ID:136-Capillarity-induced Wrinkling in Fibrous Liquid-Infused Membranes
Aoujdad, Khalid	ID:241- Influences of mechanical and water aging on changes in mechanical behavior and damage mechanisms on sandwich structures used as windturbine blades in marine environment (EMR)
Apolinar-Fernández, Alejandro	ID:548-Advanced inverse formulations for 3DTFM: regularized and non-regularized strategies for traction reconstruction
Appolaire, Benoit	ID:568-Phase-field Cosserat Crystal Plasticity Towards Modelling Nucleation In Recrystallization ID:184-Upscaling transformation plasticity in steel based on full field FFT simulations of polycrystals undergoing phase transformations under applied loads ID:255-Modeling of Short Crack Propagation: Coupling Phase Field Method with Discrete Dislocation Dynamics
Appolaire, Benoît	ID:470-Cellular automaton modeling of bainite in steels
Aranda, Pedro	ID:514-A crack length control method for a Phase Field Fracture model in a fft-based scheme
Aranda Ruiz, Josué	ID:235-Dynamic Actuation Modes in Magneto-Responsive Bistable Structures: A Rate-Dependent Approach
Arhant, Mael	ID:348-Ageing of a PBSAT fishing net: a multiscale study
Arias, Angel	ID:11-Thermo-electro-mechanical microstructural interdependencies in conductive composites
Arias Vicente, Irene	ID:588-Multiscale modelling of the effect of surface piezoelectricity in finite samples ID:587-Computational homogenization and topology optimization of flexoelectricity-based metamaterials for apparent piezoelectricity
Ariza, Pilar	ID:559-Rigorous generalized elasticity models for mechanical metamaterials ID:530-Hydrogen storage in Mg nanowires: ADP potentials
Arizmendi-Jaca, Mikel	ID:384-Micro-scale Characterisation of Residual Stresses Generated during Face Turning using Focused Ion Beam Milling and Digital Image Correlation
Arteiro, Albertino	ID:498-Assessing the energy absorption capability of sustainable hybrid composites ID:476-Energy absorption capability of novel composite materials employed in mechanicallyfastened joints ID:174-Constructing a database of Fully-Uncoupled Multi-Directional (FUMD) specimens for delamination testing
Artero-Guerrero, Jose Alfonso	ID:585- On the influence of cryogenic temperatures on CFRP laminates subjected to impulsive loadings ID:584-Strain rate influence on the compressive behaviour of holed woven CFRP laminates
Arvind,	ID:580-Generalized structure tensor-based switchless constitutive relation for arterial tissues
Asensio-ValentÍn, MarÍa	ID:282-The influence of matrix and fibers on the mechanical response of recycled fiber-reinforced polymer composites from aeronautic sector
Asheri, Armin	ID:277-Chemo-mechanical Damage Modeling of the Impact of Microstructure on Performance and Cracking in Polycrystalline Lithium-ion Battery Cathode Active Material
Ask, Anna	ID:568-Phase-field Cosserat Crystal Plasticity Towards Modelling Nucleation In Recrystallization ID:257-Characterization of the deformed state before the onset of recrystallization in pure aluminium by in situ SEM tensile tests and CPFEM simulations
Asp, Leif E.	ID:403-Automatic voxel-based generation of 3D mesostructures of stochastic tow-based discontinuous composites for the prediction of elastic properties
Assaf, Samir	ID:117-Hydrogen-assisted fatigue damage modeling using phase field method
Aubin, Véronique	ID:271-Study of the compressive behavior of polymer cable in a rubber matrix
Auchmann, Bernhard	ID:250-Mechanical identification and modelling of impregnated Nb3Sn Rutherford cable stacks under compressive loading
Audoly, Basile	ID:08-Higher-order boundary conditions for asymptotic homogenization
Audoly, Basile	ID:291-Asymptotic higher order homogenization of discrete microstructures
Aune, Sigurd	ID:377- Testing and Modelling of Welded Aluminium Joints
Auth, Kim Louisa	ID:409-A gradient-enhanced phase-field crystal plasticity model for ductile failure predictions
Autissier, Laurence	ID:131-Investigation of mechanical dissipation effects during cyclic nanoindentation of thermally aged filled elastomer networks
Awada, Ibrahim	ID:94-Multiply scattered sound and strain in a granular suspension
Awdi, Ahmad	ID:72-Microstructure characterization of unsaturated wet granular materials using x-ray microtomography
Aydıner, C. Can	ID.461-On the local stress information from a partial unload with in situ microscopic digital image correlation ID:456-Multi-scale strain localization in Magnesium via in situ full-field digital image correlation
Ayed, Kamilia	ID:480-Finite size effect on soft granular materials under compaction
Aymard, Antoine	ID:549-Metainterfaces: how to design a soft contact that obeys a specified friction law?
Aymeirich-Armengol, Raquel	ID:317-Compression of dewetted nickel microparticles at ultra-high strain rates
Aymon, B	ID:313-Scale Bridging via Peierls-Nabarro Modeling of Dislocations in Complex Alloys
Ayvaz, Isabell	ID:56-Predicting the intrinsic tensile strength of etched glass using the coupled criterion
Azam, Farooq I	ID:440-Multi-objective shape optimisation of periodic lattices
Azihari, Rachma	ID:332-A combined experimental and numerical study to assess austenitic stainless steels oxidized grain boundaries fracture properties
Azéma, Emilien	ID:158-Elongated Grains in Silos: A 3D Odyssey through Non-linear Flow Variations
B
Ba, El Hadji Amadou	ID:241- Influences of mechanical and water aging on changes in mechanical behavior and damage mechanisms on sandwich structures used as windturbine blades in marine environment (EMR)
Bachelier-Locq, Agnès	ID:179-Experimental characterisation of the hardening mechanisms of an aluminium alloy produced by the L-PBF process
Bafaluy Ojea, Sergi	ID:90-Development of adaptative printing parameters for enhanced productivity of L-PBF printed AlSi10Mg
Bai, Yifei	ID:206-Mechanics of liquid crystal inclusion reinforced composites
Balint, Dan	ID:554-On The Role of Plastic Relaxation in Stress Assisted Grain Boundary Oxidation
Balmon, Jean	ID:303-Quantifying stress intensity factors in fretting tests via digital image correlation
Banait, Shruti	ID:391-Understanding serrated flow in Inconel 718 architected lattices
Bandla, Divya Sri	ID:430-Understanding the grain boundary sliding in Ni bicrystal via micromechanical testing
Banoune, Abder	ID:155-Numerical simulation of additive manufacturing based on fused deposition modeling: Application to the prediction of geometric deviations and mechanical performances of 3D printed prosthetic devices
Bansal, Ujjval	ID:582-The effect of grain boundaries on the fracture toughness of hard coatings ID:478-Understanding twinning mechanisms and measuring twinning stress of CoCrFeNiMn high entropy alloy using micro-mechanical testing
Baral, Paul	ID:292-Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films ID:191-Nanoindentation of strong and ductile Al2O3/Al hybrid nanolaminates ID:357-Combining nano-DIC and ACOM TEM to study the ductility enhancement of aluminium films by grain boundary sliding
Barba, Daniel	ID:118-On the connection between cellular design, defects, and fatigue performance in additively manufactured metamaterials ID:130-Influence of processing defects on the mechanical performance of additively manufactured titanium cellular materials ID:124-Multiscale analysis of the dynamic behavior of additively manufactured Ti6Al4V architected metamaterials
Barceló-Mercader, Jordi	ID:587-Computational homogenization and topology optimization of flexoelectricity-based metamaterials for apparent piezoelectricity
Bardella, Lorenzo	ID:296-Size-dependent large-deformation elastoplasticity relying on Eulerian rates of elastic incompatibilities
Barrasa-Fano, Jorge	ID:548-Advanced inverse formulations for 3DTFM: regularized and non-regularized strategies for traction reconstruction
Barrera, Gabriele	ID:389-Relating laser powder bed fusion process parameters to (micro)structure and to soft magnetic behaviour in a Fe-based bulk metallic glass ID:556- Influence of Thickness on the (Micro)structure and the Magnetic behavior of Kuamet6B2 Thin Walls
Barres, Quentin	ID:257-Characterization of the deformed state before the onset of recrystallization in pure aluminium by in situ SEM tensile tests and CPFEM simulations ID:179-Experimental characterisation of the hardening mechanisms of an aluminium alloy produced by the L-PBF process
Barretta, Raffaele	ID:579-Higher-order nanobeams based on stress-driven integral elasticity
Barrot, Elodie	ID:248-Influence of yield surface on stress redistribution and strain localization in a flat notched sample for turbine disk application
Barrès, Quentin	ID:261-Experimental study and modeling of bending behavior in temperature of a SMAT-treated Ni-based superalloy
Barsania, Md Saad Hussain	ID:512-Numerical study of the influence of woven roving mat reinforcement on shape deformation, fixity, and recovery of shape memory polymer composite beams
Bartel, Thorsten	ID:335-Data-driven inelasticity enhanced by neural networks: Opportunities in computational mechanics
Bartelt, Martin	ID:347-Influence of the Loading Type on the Very High Cycle Fatigue Behaviour of Composite Materials
Barthel, Etienne	ID:49-Influence of the mineral wool microstrucure on its dynamic macroscopic behaviour
Bartosik, Matthias	ID:582-The effect of grain boundaries on the fracture toughness of hard coatings
Basista, Michał	ID:121-Testing and phase-field modeling of fracture in Al2O3/Cr and Al2O3/AlSi12 metal-matrix composites under quasi-static and dynamic loads
Bassani, John	ID:543-Defining Fracture Toughness for Hydrogels
Basu, Silva	ID:400-Mechanical behavior of grain boundaries containing precipitates in a refractory compositionally complex alloy
Batatia, Ilyes	ID:487-Energy-conserving equivariant GNN predictions of stiffness for lattice materials
Batista, Adriano C.	ID:365-Manufacture of Inserts for High Pressure Aluminum Injection Molds by Additive Manufacturing
Batmaz, Onur Ali	High-fidelity Finite Element Simulations of Low-Velocity Impact on [05/903]s CFRP Beam Considering Accurate Experimental Conditions
Batouche, Fatiha	ID:524-Experimental and numerical investigation of the inter-laminar shear behavior of flax/epoxy composite laminate
Bayle, Jean-Philippe	ID:557- Influence of microstructure and interlocking on mechanical behavior of agglomerates of hexapod-shaped particles ID:429-Agglomerate crack propagation under micro-compression as seen by phase-contrast tomography
Baylis, Sonya	ID:203-Mechanics in Forensic Science: predicting Traumatic Brain Injury via mechanics enhanced machine learning
Beauclair, Timothy	ID:573-Examining force-dependent density-reductions and tau mislocalization in dendritic spines with concomitant alterations in network dynamics in TBI-on-a-chip
Beaurain, Arnaud	ID:242_Stress field estimation for a 316L stainless steel through full-field measurement
Bejarano Vázquez, José Ángel	Thermal history prediction by Machine Learning in Additive Manufacturing
Belfort, Maxime	ID:155-Numerical simulation of additive manufacturing based on fused deposition modeling: Application to the prediction of geometric deviations and mechanical performances of 3D printed prosthetic devices
Bellus, Jacques	ID:470-Cellular automaton modeling of bainite in steels
Bellón, Bárbara	ID:317-Compression of dewetted nickel microparticles at ultra-high strain rates
Ben Bettaieb, Mohamed	ID:103-Ductility limit predictions for porous materials using a damage coupled CPFEM approach
Ben El Barguia, Ghita	ID:542-An incremental variational homogenization approach of damage in brittle matrix composites
Bengoetxea Aristondo, Mikel	ID:99-Deformation modes and damage mechanisms of a basal-textured ZnAlMg coating under multiaxial loading
Benn, Felix	ID:334-Exploring the evolution of mechanical deformation of intact and degraded SLM WE43 scaffolds: An In Situ X-ray Characterization
Benoît, Tanguy	ID:521- Influence of irradiation and deformation on slip transfer in austenitic stainless steels ID:332-A combined experimental and numerical study to assess austenitic stainless steels oxidized grain boundaries fracture properties
Bense, Hadrien	ID:73-Coalescence of slender structures removed from a liquid bath
Benzerga, Amine	ID:558-On the effect of the third stress invariant in ductile failure: microscopic and macroscopic aspects
Berenguer, Felisa	ID:564- In situ three-dimensional observation of plasticity onset in a Pt nanoparticle
Bergmann, Jeroen	ID:272-Machine learning-based prediction of brain mechanics in sports-like head-to-head collisions
Beringhier, Marianne	ID:180-Aero-thermo-chemo-mechanical couplings and aging occurring during exposure of polymer materials under high-speed airflow at high temperature.
Bernachy-Barbe, Fabien	ID:218-Simulation of packing kinetic and diffusive properties of fragment beds using the DEM-FFT method
Berterretche, Patrick	ID:180-Aero-thermo-chemo-mechanical couplings and aging occurring during exposure of polymer materials under high-speed airflow at high temperature.
Berthe, Julien	ID:140-The contribution of infrared thermography to impact testing at low and high velocities
Bertin, Vincent	ID:132-Mechanical response of a hydrogel: from small deformations to the dehydration-induced glass transition
Bessa, Miguel	ID:48-Cooperative data-driven modeling
Bessa, Miguel	ID:539-Designing achitected structures with tailored transport-thermal-mechanical performance using data-driven methods
Bessiere, Thibault	ID:405-Development of a polyhedral DEM method for simulating the relocation of nuclear fuel during a LOCA.
Besson, Jacques	ID:77-Simulation of size effects in cracked ductile specimens using a GTN nonlocal model
Bhaskar, Lalith Kumar	ID:317-Compression of dewetted nickel microparticles at ultra-high strain rates
Bhat, Mohd Ilyas	ID:515-DEM study of force transmission in flexible granular chain packings
Bhattacharya, Kaushik	ID:502-Size effects in the plasticity-assisted fracture of brittle polycristals
Bianchetti, Charles	ID:598- Identification of the corrosion fatigue crack initiation and propagation lives using in-situ electrochemical measurements of the LPBF 316L
Bianchi, Daniele	ID:523- Insulin fluid dynamics and absorption via subcutaneous injection port: a computational study addressing flow obstructions and tissue heterogeneities ID:420-Multiphysics behaviour of photo-activated polymers for tissue bioprinting
Bianchi, Tobias	ID:204-Pin-ended buckling test on plain and open hole composites to evaluate the strain gradient effect on compressive failure
Bianco, Alberto	ID:304-New Mechanics in Cell-Nanomaterial Interactions: Boron Nitride Nanosheets Inducing Water Channels Across Lipid Bilayers
Bico, José	ID:264- The Y-rod test ID:395-Control and instabilities of fracture paths when tearing brittle sheets ID:394-Pneumatic surface morphing plates fabricated through a direct ink writing ID:259-Harnessing stiffness asymmetry in thin sheets inflatables for high deformation shape morphing ID:55-Deploying Complex shapes using Kirigami
Bignon, Agathe	ID:158-Elongated Grains in Silos: A 3D Odyssey through Non-linear Flow Variations
Billon, Florian	ID:283-Finite element simulations of jerky flow in nickel-based superalloy IN718
Billon-Lanfray, Christine	ID:155-Numerical simulation of additive manufacturing based on fused deposition modeling: Application to the prediction of geometric deviations and mechanical performances of 3D printed prosthetic devices
Bilotto, Jacopo	ID:575-Dynamics of fluid-mediated approach of a soft solid to rigid interface
Binysh, Jack	ID:210-The elastic Leidenfrost effect: An interplay between vaporization rate, gas flow rate, and shape.
Blal, Nawfal	ID:555-Mechanical response of coextruded multi-nanolayered films of PS/LDPE : How mechanical confinment enables to control PS damage mechanisms
Blanco Rodríguez, Alberto	ID:280-Development of a simulation model of the thermoforming process of polymer matrix composite materials and definition of a Forming Limit Curve to identify defects and optimize their manufacture
Blanco Villaverde, Norbert	ID:174-Constructing a database of Fully-Uncoupled Multi-Directional (FUMD) specimens for delamination testing
Blassiau, Sébastien	ID:233-Mechanisms of deformation and voiding using tomography on neat and glass syntactic polypropylene : Finite Element simulations on flat notched specimens
Bleuset, Alexandre	ID:154-Creep behavior of SAC305 quasi-single crystal at 185°C
Bleyer, Jeremy	ID:446-Understanding stress-plastic strain evolution of AM 316L steel microstructures due to post process laser scanning: experiment-driven thermomechanical study
Blixt, Kevin	ID:26-Exploring grain boundary multiplicity by phase field crystal simulations ID:27-Phase field crystal modeling of grain boundary structures in diamond cubic systems
Blume, Anke	ID:240-Multiscale Analysis of Elastomer-Based Composite Materials Using Strain Energy Homogenisation
Blázquez-Carmona, Pablo	ID:548-Advanced inverse formulations for 3DTFM: regularized and non-regularized strategies for traction reconstruction ID:239-Mechanic-Based Therapies in Osteoporosis: A Multimodal approach
Bochenek, Kamil	ID:121-Testing and phase-field modeling of fracture in Al2O3/Cr and Al2O3/AlSi12 metal-matrix composites under quasi-static and dynamic loads
Boddapati, Jagannadh	ID:156-Estimating the bounds on anisotropic elastic moduli in two-dimensional structured materials
Bodelot, Laurence	ID:152-Soft active magnetorheological elastomers: from material characterization to instability harnessing ID:146-Fabrication and characterization of soft magnetorheological foams ID:142- 3D numerical analysis of instability patterns formed at the surface of magnetorheological elastomer film/substrate systems under magneto-mechanical loading. ID:64-Numerical study and analytical characterization of soft magnetorheological foams
Boillat, Eric	ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Boleininger, Max	ID:276-Theoretical Investigation of Fast Low-Temperature Irradiation Creep - Development of a parameter-free digital shadow for quantitative predictions ID:278-Experimental Investigation of Fast Low-Temperature Irradiation Creep – A Novel Experiment for Materials Testing under Extreme Conditions ID:201-Multi-scale modelling of irradiated metallic materials for fusion reactors
Bonamy, Daniel	ID:520-Fast cracks in amorphous polymers: unraveling the interplay between near-tip microcracking dynamics and macroscale fracture mechanics ID:416-AI-based design of optimal architectures for ultra-light isotropic microtruss-based metamaterials ID:115-3D printed polymers by photopolymerization: link between resin chemistry, printing parameters and mechanical properties
Bonanno, Claudia	ID:571-Continuum multi-physics modeling of cell and bacteria motility.
Bondarev, Andrey	ID:586-Deformation behavior Analysis of P91 Martensitic Steel: Micropillar Tests and Crystal Plasticity Modelling
Bonet, Javier	ID:581- A first-order hyperbolic Arbitrary Lagrangian Eulerian conservation formulation for non-linear solid dynamics in irreversible processes
Bonnand, Vincent	ID:145-Development of HCF testing for small cracks propagation study
Bor, Ton	ID:240-Multiscale Analysis of Elastomer-Based Composite Materials Using Strain Energy Homogenisation
Bordas, Stéphane	ID:412-Towards efficient modeling for quantum-informed mechanics of polymers: a DFTB+MBD framework
Bordeenithikasem, Punnathat	ID:475-Additively Manufactured Jammable Structured Fabrics for Deployable Structures
Bornert, Michel	ID:482-Micromechanical study of synthetic rock salt by X-ray µCT in situ triaxial tests
Bornowsky, Lucille	ID:408- O-embrittlement and microstructure effects on fatigue life of quasi-alpha Ti alloys
Borvik, Tore	ID:596-Fracture mechanisms in largely strained steels due to self-contacting surface defects: experiments and modelling
Bosi, Federico	ID:171-Design and control of shape-changing elastic robotic structures ID:440-Multi-objective shape optimisation of periodic lattices
Bouallala, Radouan	ID:392-Effect of fibre rotation on the coupling between matrix cracking and delamination.
Bouillet, Corinne	ID:349-A finite element model of TiAl/TiAlN nano-multilayered coatings
Bouilly, Thibaut	ID:224-Investigating the role of microstructural features in plastic deformation of friction-stir deposited aluminum
Boulnat, Xavier	ID:411-Characterization of keyhole regime for Laser Powder Bed Fusion: from single track formation to multi layers volume, the change in laser and matter interaction ID:373-Effect of post-processing heat treatments on mechanical anisotropy of Ti-6Al-4V alloy fabricated by L-PBF ID.592-Challenging pressure-free debinding/sintering of Magnesium alloy: application to 3D printed parts by direct-ink writing
Bouobda Moladje, Gabriel Frank	ID:288-A quantitative phase-field study of hydrogen embrittlement in metals
Bourdier, Eléonore	ID:225-Analytical and numerical comparisons of incremental mean-field homogenization schemes.
Boutin, Claude	ID:407-Poro acosutics with evaporation/condensation ID:383-Dynamics of a multi-supported beam: homogenized models and relevant boundary conditions
Bouvet, Christophe	ID:204-Pin-ended buckling test on plain and open hole composites to evaluate the strain gradient effect on compressive failure ID:451-Numerical simulation and R-curves computation of CFRP Compact Tension tests using the Discrete Ply Model
Bouyx, Marie	ID:145-Development of HCF testing for small cracks propagation study
Bouzidi, Rabah	ID:265-Nonlinear plate theory for inflatable panels: theoretical, numerical and experimental investigations
Box, Finn	ID:150-Delamination from an adhesive sphere: Curvature-induced dewetting versus buckling
Boyer, François	ID:528-Experimental study of micro-vascular networks embedded in carbon composites for High Energy Physics applications submitted to internal pressure
Bozkurt, Mirac Onur	High-fidelity Finite Element Simulations of Low-Velocity Impact on [05/903]s CFRP Beam Considering Accurate Experimental Conditions
Bozkurt, Mirac Onur	ID:570-A data-driven framework to establish surrogate constitutive models of viscoelastic porous elastomers
Brach, Stella	ID:330-Dialogue between brittle fracture mechanics and experiments using additive manufacturing to study crack propagation in anisotropic materials
Brassart, Laurence	ID:170-An anisotropic damage model for strain-softening in rubber-like materials ID:346-A discrete-continuum model for hydrolytic degradation in polymers ID:139-Modelling hydrolytic degradation in rubber networks: discrete stochastic and continuum approaches ID:126-Experimental characterisation and modelling of electrospun biomedical fibres ID:206-Mechanics of liquid crystal inclusion reinforced composites
Brau, Fabian	ID:51-Essential role of papillae flexibility in nectar capture by bees ID:50-Wrinkling of indented sheets on viscous fluid ID:73-Coalescence of slender structures removed from a liquid bath
Brem, André	ID:250-Mechanical identification and modelling of impregnated Nb3Sn Rutherford cable stacks under compressive loading
Brenner, Renald	ID:225-Analytical and numerical comparisons of incremental mean-field homogenization schemes. ID:270-Accounting for spatial distribution in mean-field homogenization of particulate composites ID:443- Homogenization of composite materials with fractional viscoelastic constituents
Brepols, Tim	ID:437-Neural Operator-Driven Analysis of Heterogeneous Microstructures: Mechanical and Thermal Behaviors ID:551-Discovering Tension-Compression Asymmetry in Plant Tissues Using inelastic Constitutive Artificial Neural Networks
Brighenti, Roberto	ID:311-Swelling-related mechanical propeties of hydrogels
Brinckmann, Steffen	ID:399-High temperature nanoindentation of different metals: evaluating thermal drift, frame stiffness and composition effects on the mechanical properties ID:463-Surface evolution in a stainless steel induced by electrochemical hydrogen charging
Brink, Tobias	ID:317-Compression of dewetted nickel microparticles at ultra-high strain rates
Brodmann, Mathieu	ID:310-Domain switching mechanisms dictating the bulk ferroelectric response
Broudin, Morgane	ID:62-Internally-pressurized plastic pipes mimicked by plane strain grooved tensile (PSGT) specimens
Brouzoulis, Jim	ID:409-A gradient-enhanced phase-field crystal plasticity model for ductile failure predictions
Bruant, Xavier	ID:294-Effect of Stress and Viscoplastic Behavior on the Electrochemical Response of Amorphous Silicon Electrodes
Brunner, Florian	ID:222-General grain boundary K-test framework for the assessment of liquid metal embrittlement at the atomic scale
Bruns, Sebastian	ID:398-Doping-regulated room-temperature dislocation plasticity in SrTiO3: a nanoindentation approach
Busch, Ralf	ID:389-Relating laser powder bed fusion process parameters to (micro)structure and to soft magnetic behaviour in a Fe-based bulk metallic glass
Busch, Ralf	ID:556- Influence of Thickness on the (Micro)structure and the Magnetic behavior of Kuamet6B2 Thin Walls
Busso, Esteban	ID:157-A Discontinuous Galerkin Finite Element Scheme for A Dislocation Density Transport Based Crystal Plasticity Formulation
Butcher, Thomas	ID:182-A fuzzy inference model for prediction of delay risk associated with low rail-wheel adhesion
Bönisch, Matthias	ID:545-Determination of Crystal Plasticity Parameters from In-Situ Synchrotron Diffraction
Börjesson, Elias	ID:327-Mesoscale modelling of complex textile-reinforced composite materials using the finite cell method
C
C Reed, Roger	ID:130-Influence of processing defects on the mechanical performance of additively manufactured titanium cellular materials
Caballero, Ricardo	ID:565- In-Silico Modeling of Atherosclerosis: Continuous and Agent-Based Hybrid Approach
Cadet, Clément	ID:125-Ductile fracture of materials with randomly distributed defects ID:98-Bayesian calibration of a nucleation model for ductile spalling failure
Cadet, Maxi	ID:285-Characterization of cleavage initiation sites in relation to the microstructure and tempering conditions of a Reactor Pressure Vessel steel
Calbert, Yanis	ID:47-Phase-field modelling of grain boundaries for radiation induced segregation predictions
Caliskan, Erdem	ID:560-Reduced order modeling of dynamics of cellular low-frequency resonant metamaterials for design and optimization
Campbell, Jimmy	ID:135-Profilometry-based Indentation Plastometry (PIP), a Technique to Measure Stress-Strain Curves from Indentation
Campos, Natanael C. Q.	ID:365-Manufacture of Inserts for High Pressure Aluminum Injection Molds by Additive Manufacturing
Campos, Pedro	ID:476-Energy absorption capability of novel composite materials employed in mechanicallyfastened joints
Caraballo, Isaac Toda	ID:388- Influence of Lattice Architecture Mixing Strategy for Improved Mechanical Properties in Additively Manufactured Inconel718 Lattices Thermal history prediction by Machine Learning in Additive Manufacturing
Cardeña Díaz, Andrea	ID:124-Multiscale analysis of the dynamic behavior of additively manufactured Ti6Al4V architected metamaterials
Caro, Anne-Sophie	ID:256-Constitutive modelling of damage-induced stress softening of biological soft materials
Casati, Nicola	ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Casey, Nicholas	ID:203-Mechanics in Forensic Science: predicting Traumatic Brain Injury via mechanics enhanced machine learning
Castagnet, Sylvie	ID:168-Mechanical heterogeneities in spherulitic microstructures of semi-crystalline polymers: quantitative characterization from micrometric to nanometric scales using nanoindentation and atomic force microscopy
Castagnet, Sylvie	ID:599-Fatigue resistance of chemically pre-aged Short Fiber Reinforced Polyamides
Castejón Galan, Pilar	ID:90-Development of adaptative printing parameters for enhanced productivity of L-PBF printed AlSi10Mg
Castelluccio, Gustavo	ID:81-Effect of Contamination Morphology on Stress Corrosion Cracking and Fatigue Life
Castillón, Miguel	ID:339-An Incompatible Finite Element formulation for enhanced representation of solutions in Phase-Field problems: Application to Regularized Fracture
Cayron, Cyril	ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Cazacu, Oana	ID:19-Time effects on the plastic deformation of single crystals
Cazottes, Sophie	ID:373-Effect of post-processing heat treatments on mechanical anisotropy of Ti-6Al-4V alloy fabricated by L-PBF
Cañibano Álvarez, Esteban	ID:280-Development of a simulation model of the thermoforming process of polymer matrix composite materials and definition of a Forming Limit Curve to identify defects and optimize their manufacture ID:282-The influence of matrix and fibers on the mechanical response of recycled fiber-reinforced polymer composites from aeronautic sector
Cedeno, Rebeca	ID:246-Modeling Thermo-Mechanical Behavior in Filled Elastomers: Applications to Finite-Element Numerical Simulation
Cereza, Eneritz	ID:595- Optimization of Easy Open Ends for Food Can Packaging: A Comprehensive Material Analysis Approach
Chagnon, Grégory	ID:256-Constitutive modelling of damage-induced stress softening of biological soft materials
Chaieb, Houssem Eddine	ID:99-Deformation modes and damage mechanisms of a basal-textured ZnAlMg coating under multiaxial loading
Chaki, Salim	ID:117-Hydrogen-assisted fatigue damage modeling using phase field method
Chandrasekaran, Rajesh	ID:52-Modeling of open-porous materials based on their microstructure
Chang, Cynthia	ID:547-Operando tomographic microscopy during laser-based powder bed fusion.
Chanin Lambert, Pauline	ID:411-Characterization of keyhole regime for Laser Powder Bed Fusion: from single track formation to multi layers volume, the change in laser and matter interaction
Charkaluk, Eric	ID:462-Microstructure - defect competition in high cycle fatigue of a duplex stainless steel obtained by laser powder bed fusion ID:224-Investigating the role of microstructural features in plastic deformation of friction-stir deposited aluminum ID:154-Creep behavior of SAC305 quasi-single crystal at 185°C
Charleux, Damien	ID:271-Study of the compressive behavior of polymer cable in a rubber matrix
Charpin, Sophie	ID:271-Study of the compressive behavior of polymer cable in a rubber matrix
Chateau, Camille	ID:72-Microstructure characterization of unsaturated wet granular materials using x-ray microtomography
Chau, Thomas	ID:343-Fracture initiation in a cohesive granular layer
Chaves, Filipe R.	ID:303-Quantifying stress intensity factors in fretting tests via digital image correlation
Chawla, Anoop	ID:322-Shape Optimization of Auxetic Sandwich Panel for Enhanced Underbelly Blast Protection of Armoured Vehicle
Chen, Dean	ID:428-Elastic Instability in Soft Particulate Composites with Stiffening Behavior
Chen, Dean	ID:457-Rate-dependent instabilities in soft visco-hyperelastic composites
Chen, Fan	ID:149-Formulation of mean-field model for the accurate prediction of creep deformation of alloy 800H under very-high temperature and low-stress loadings
Chen, K.	ID:151-Icosahedral short-range order mediated twin formation in laser direct energy deposited 316L stainless steel with silicon ID:176-Coupling a continuous wave laser with a scanning electron microscope to achieve characterisation and improvement of additively manufactured materials microstructure
Chen, Wanxin	ID:390-A length scale insensitive cohesive phase-field model for inter-/trans- granular fractures: application to image-based reconstructed NMC cathode particles
Chen, Zhi	ID:391-Understanding serrated flow in Inconel 718 architected lattices
Cheney, Willoughby	ID:560-Reduced order modeling of dynamics of cellular low-frequency resonant metamaterials for design and optimization
Cheng, Long	ID:507- Incremental variational approach coupling gradient damage with poroelasticity of saturated media
Cherkasov, Andrei	ID:421- Instability analysis of layered magnetoactive elastomers
Chevalier, Jérémy	ID:269- Influence of crystallization conditions on local matrix mechanical properties and fracture behavior of carbon fiber-reinforced PEEK composite
Chevalier, Jérôme	ID:155-Numerical simulation of additive manufacturing based on fused deposition modeling: Application to the prediction of geometric deviations and mechanical performances of 3D printed prosthetic devices
Chinesta, Francisco	ID:181-A comparison of Single- and Double-generator formulations for Thermodynamics-Informed Neural Networks
Chng, Choon-Peng	ID:188-Lipid Peroxidation-induced Membrane Mechanics Modulation and Nanovesicle Shape Transformation
Cho, Hansohl	ID:491- Stiffness, strength, energy dissipation and reusability in architected polycrystals
Choi, Young	ID:67-Stretching the endothelium: characterization and modeling of mechanical damage in young and aged endothelial cells.
Chávez Thielemann, Hernán	ID:93-Structure-Property Relations for Semi-Crystalline iPP Polymorphs
Ciambella, Jacopo	ID:414-Viscoelastic Properties of Magnetorheological Elastomers for Multilayered Semi-Active Damper Applications
Cicotti, Matteo	ID:344-Plastic chip formation in Swiss cheese the "tête de moine"
Ciganas, Justas	ID:574- Investigation of Dynamic Mechanical Properties of PP Thermoplastic
Cizelj, Leon	ID:245-Numerical Implementation of Strain Gradient Crystal Plasticity in Irradiated Polycrystalline Aggregates Using FFT-Homogenization Method
Clausen, Arild	ID:377- Testing and Modelling of Welded Aluminium Joints
Cobian Gonzalez, Lucia	ID:337-X-ray in-situ testing and numerical analysis of SLS manufactured lattice structures
Codony Gisbert, David	ID:588-Multiscale modelling of the effect of surface piezoelectricity in finite samples ID:587-Computational homogenization and topology optimization of flexoelectricity-based metamaterials for apparent piezoelectricity
Coget, Yann	ID:98-Bayesian calibration of a nucleation model for ductile spalling failure
Cohen, Noy	ID:311-Swelling-related mechanical propeties of hydrogels
Coker, Demirkan	ID:472-Bioinspired Soft-Hard Interfaces Fabricated by Multi-material Additive Manufacturing: A Fracture Mechanics Investigation using Essential Work of Fracture High-fidelity Finite Element Simulations of Low-Velocity Impact on [05/903]s CFRP Beam Considering Accurate Experimental Conditions
Colla, Marie-Stephane	ID:401-Strain engineering of thin semiconductor films investigated using the residual-stress-actuated on-chip testing method
Collier, Alice	ID:198-The loading of the fetal brain during the second stage of labour
Conti, Sergio	ID:559-Rigorous generalized elasticity models for mechanical metamaterials
Contreras-Almengor, Oscar	ID:425-Laser powder bed fusion of NiTi alloy parts for cardiovascular applications
Cordier, Patrick	ID:292-Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films ID:319-Stress-induced amorphization and grain boundary sliding in olivine
Coret, Michel	ID:195-A local definition of multiaxiality in elastomers and its application to fatigue testing
Cornaggia, Rémi	ID:225-Analytical and numerical comparisons of incremental mean-field homogenization schemes. ID:270-Accounting for spatial distribution in mean-field homogenization of particulate composites
Cornelius, Thomas W.	ID:564- In situ three-dimensional observation of plasticity onset in a Pt nanoparticle
Cornet, L.	ID:151-Icosahedral short-range order mediated twin formation in laser direct energy deposited 316L stainless steel with silicon ID:176-Coupling a continuous wave laser with a scanning electron microscope to achieve characterisation and improvement of additively manufactured materials microstructure
Corre, Thomas	ID:330-Dialogue between brittle fracture mechanics and experiments using additive manufacturing to study crack propagation in anisotropic materials
Corte, Laurent	ID:469-Mechanics of Anisotropic PVA Hydrogel Fibers as Biomimetic Soft Tissue Substitutes
Cosseron, Kevin	ID:284-Post-processing of displacement fields from digital image correlation for non-local variables and crack initiation criteria identification in fretting-fatigue
Costa, Carlos Alberto	ID:365-Manufacture of Inserts for High Pressure Aluminum Injection Molds by Additive Manufacturing
Costa Balazant, Josep	ID:589- Experimental Characterisation of Notch non-Linearities in Pseudo-Ductile Composite Laminates
Costanzo, Francesco	ID:178-The Effect of Calcification on the Mechanical Behavior of Clot Analogs for Acute Ischemic Stroke
Coulombier, Michaël	ID:292-Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films ID:141-Room temperature electron beam sensitive viscoplastic response of ultra-ductile Al/a-Al2O3 model system ID:127-Ultra-miniaturised fracture toughness testing of nanostructured tungsten films in the context of nuclear fusion ID:357-Combining nano-DIC and ACOM TEM to study the ductility enhancement of aluminium films by grain boundary sliding
Coulombier, Michaël	ID:191-Nanoindentation of strong and ductile Al2O3/Al hybrid nanolaminates
Crespo Miguel, Javier	ID:11-Thermo-electro-mechanical microstructural interdependencies in conductive composites
Cruz-González, Oscar Luis	ID:270-Accounting for spatial distribution in mean-field homogenization of particulate composites
Csanyi, Gabor	ID:487-Energy-conserving equivariant GNN predictions of stiffness for lattice materials
Cueto, Elías	ID:181-A comparison of Single- and Double-generator formulations for Thermodynamics-Informed Neural Networks
Cugnoni, Joël	ID:589- Experimental Characterisation of Notch non-Linearities in Pseudo-Ductile Composite Laminates
Cupertino Malheiros, Livia	ID:433-Developing Hydrogen-Assisted Fracture Testing of Alloys
Curatolo, Michele	ID:467-Swelling theory for multidomain materials ID:329-Pore morphology development in viscoelastic foods during drying
Curtin, William	ID:70-Solute effects on softening/strengthening of prismatic slip in Mg
Curtin, William	ID:57-Mechanism of thermally-activated prismatic slip in Mg
Curtin, William	ID:313-Scale Bridging via Peierls-Nabarro Modeling of Dislocations in Complex Alloys
Cyron, Christian J.	ID:517-Viscoelastic Constitutive Artificial Neural Networks (vCANNs) - a framework for data-driven anisotropic nonlinear finite viscoelasticity
Córdova-Tapia, Erick	ID:459-Retained Austenite in Advanced Steels: An experimentally-informed DAMASK Crystal plasticity analysis
D
Dabas, Benoît	ID:109-Phase-field modelling of interactions between extended defects in metals placed under extreme conditions
Dal, Morgan	ID:493- In-situ thermal monitoring during direct energy deposition: the links between process parameters, thermal cycles and microstructures
Dalli, Denis	ID:498-Assessing the energy absorption capability of sustainable hybrid composites ID:476-Energy absorption capability of novel composite materials employed in mechanicallyfastened joints
Dalmas, Davy	ID:520-Fast cracks in amorphous polymers: unraveling the interplay between near-tip microcracking dynamics and macroscale fracture mechanics ID:549-Metainterfaces: how to design a soft contact that obeys a specified friction law? ID:419-Comprehensive investigation of a sphere on plane contact using In Situ X-Ray Computed Tomography
Daly, Michael	ID:250-Mechanical identification and modelling of impregnated Nb3Sn Rutherford cable stacks under compressive loading
Damman, Pascal	ID:51-Essential role of papillae flexibility in nectar capture by bees ID:50-Wrinkling of indented sheets on viscous fluid
Danas, Konstantinos	ID:152-Soft active magnetorheological elastomers: from material characterization to instability harnessing ID:146-Fabrication and characterization of soft magnetorheological foams ID:142- 3D numerical analysis of instability patterns formed at the surface of magnetorheological elastomer film/substrate systems under magneto-mechanical loading. ID:64-Numerical study and analytical characterization of soft magnetorheological foams
Dancette, Sylvain	ID:373-Effect of post-processing heat treatments on mechanical anisotropy of Ti-6Al-4V alloy fabricated by L-PBF ID:419-Comprehensive investigation of a sphere on plane contact using In Situ X-Ray Computed Tomography
Daniel, Dominique	ID:323-Understanding the impact of the texture on the bendability of aluminium sheets
Daniel, Laurent	ID:290-Mechanical behavior of elastomeric bistable dome shell with tunable energy barrier asymmetry
Dantin, Matthew	ID:452-An examination of distortion and residual stresses in thermo-mechanical FE simulations of AM components via the EMMI ISV model
Danzi, Federico	ID:476-Energy absorption capability of novel composite materials employed in mechanicallyfastened joints
Daraio, Chiara	ID:156-Estimating the bounds on anisotropic elastic moduli in two-dimensional structured materials ID:475-Additively Manufactured Jammable Structured Fabrics for Deployable Structures
Darban, Hossein	ID:121-Testing and phase-field modeling of fracture in Al2O3/Cr and Al2O3/AlSi12 metal-matrix composites under quasi-static and dynamic loads
Dartois, Sophie	ID:542-An incremental variational homogenization approach of damage in brittle matrix composites ID:225-Analytical and numerical comparisons of incremental mean-field homogenization schemes. ID:270-Accounting for spatial distribution in mean-field homogenization of particulate composites
Das, Bimal	ID:273-Ratcheting behaviour of SS316L at room and low temperatures
Das, Sambit	ID:13-Effect of hydrogen on plasticity of α-Fe: a multi-scale assessment
Das, Shuvrangsu	ID:504-Reassessing rubber elasticity through full field X-ray measurements ID:503-A statistical framework for cellular reorientation under cyclic strain ID:402-Full-field strain measurements in homogeneous solids enabling discovery of new material physics
Dauchez, Nicolas	ID:49-Influence of the mineral wool microstrucure on its dynamic macroscopic behaviour
Davidovitch, Benny	ID:150-Delamination from an adhesive sphere: Curvature-induced dewetting versus buckling
Davies, Peter	ID:348-Ageing of a PBSAT fishing net: a multiscale study
De Corato, Marco	ID:12-A constitutive model of the cell nucleus: chemo-mechanical coupling and negative Poisson's ratio
De Cunto, Luis Octavio	ID:509-Surrogate modelling of springback in thermoformed foam cores
de Rancourt, Victor	ID:470-Cellular automaton modeling of bainite in steels
de Soto, Charbell	ID:90-Development of adaptative printing parameters for enhanced productivity of L-PBF printed AlSi10Mg
De Strycker, Joost	ID:99-Deformation modes and damage mechanisms of a basal-textured ZnAlMg coating under multiaxial loading
De Waele, Wim	ID:209-Improving mechanical properties in Wire Arc Additive Manufacturing of Aluminium Alloys - exploring laser cleaning
Deboeuf, Stéphanie	ID:32-Yin-Yang spiraling transition of a confined buckled elastic sheet
Dedry, Olivier	ID:253-Wear behaviour of as-built and heat treated AISI S2 Tool Steel processed by Laser Powder Bed Fusion
Dehez, Bruno	ID:307-Thermal management from the build platform for laser powder bed fusion of Fe-Si alloys
Dehm, Gerhard	ID:317-Compression of dewetted nickel microparticles at ultra-high strain rates
Dekhovich, Aleksandr	ID:48-Cooperative data-driven modeling
del Rio Hernandez, Armando	ID:87-Magneto-mechanical system to evaluate mechanical and functional responses in astrocytes under alternating substrate deformation modes
Delagnes, Denis	ID:356-Advanced characterization techniques to inform digital twins of deformed Inconel 718 and predict plastic localization using FFT-based simulations
Delannay, Francis	ID:362-How GBS and diffusion-aided redundant displacements of adjacent grains contribute to the overall viscosity of a porous polycrystal
Delannay, Laurent	ID:458-Crystal plasticity modeling of nanoindentation in ITER-relevant W/Cu joints ID:362-How GBS and diffusion-aided redundant displacements of adjacent grains contribute to the overall viscosity of a porous polycrystal ID:127-Ultra-miniaturised fracture toughness testing of nanostructured tungsten films in the context of nuclear fusion ID:357-Combining nano-DIC and ACOM TEM to study the ductility enhancement of aluminium films by grain boundary sliding
Delbruel, Valentine	ID:155-Numerical simulation of additive manufacturing based on fused deposition modeling: Application to the prediction of geometric deviations and mechanical performances of 3D printed prosthetic devices
Delenne, Jean-Yves	ID:566-A new numerical model for the elasto-plastic behavior of cellular materials
Delenne, Jean-Yves	ID:595-Macro-elasticity of granular materials composed of polyhedral particles ID:480-Finite size effect on soft granular materials under compaction
Della Valle, Guy	ID:260-Effect of processing on morphological features and mechanical properties of extruded pea starch-protein composites
Delplanque, Emilie	ID:549-Metainterfaces: how to design a soft contact that obeys a specified friction law?
Demetriou, Plastiras	ID:107-Mechanical metamaterials: frequency-independent enriched continua from frequency-dependent models ID:207-Finite-size metamaterials and non-coherent reduced relaxed micromorphic interfaces
Deng, Na	ID:374-Critical state seen as an emerging property in granular materials
Denis, Sabine	ID:184-Upscaling transformation plasticity in steel based on full field FFT simulations of polycrystals undergoing phase transformations under applied loads
Denis, Sabine	ID:470-Cellular automaton modeling of bainite in steels
Derieux, Thibaud	ID:416-AI-based design of optimal architectures for ultra-light isotropic microtruss-based metamaterials
Derrienic, Yves	ID:221-Development of repair of large stainless steel parts by direct metal deposition for the energy sector
Deshmukh, Prithviraj	ID:352-Mass transport in nanoparticle sintering stage of additive manufacturing: Macro- and meso-scale computational models.
Deshpande, Vikram	ID:504-Reassessing rubber elasticity through full field X-ray measurements ID:487-Energy-conserving equivariant GNN predictions of stiffness for lattice materials ID:500-Role of topology on the dynamic response of spinodal meta-materials ID:503-A statistical framework for cellular reorientation under cyclic strain ID:402-Full-field strain measurements in homogeneous solids enabling discovery of new material physics ID:359-Strain gradient plasticity of constrained thin lithium layers subjected to compression and shear ID:536-Reassessing Strain Gradient Elasticity in Architected Solids: Unveiling Intriguing Meta Behaviours
DeSimone, Antonio	ID:438-Modeling Self-oscillation in Immersed Liquid Crystal Elastomer Beams under Constant Light: A Multi-physics Approach
Desrayaud, Christophe	ID:411-Characterization of keyhole regime for Laser Powder Bed Fusion: from single track formation to multi layers volume, the change in laser and matter interaction ID:373-Effect of post-processing heat treatments on mechanical anisotropy of Ti-6Al-4V alloy fabricated by L-PBF
Devos, Olivier	ID:598- Identification of the corrosion fatigue crack initiation and propagation lives using in-situ electrochemical measurements of the LPBF 316L
Dezellus, Olivier	ID.592-Challenging pressure-free debinding/sintering of Magnesium alloy: application to 3D printed parts by direct-ink writing
Dhekne, Pushkar	ID:545-Determination of Crystal Plasticity Parameters from In-Situ Synchrotron Diffraction
Dhuilipala, Somayajulu	ID:453-Curvature-guided design of shell-based spinodal metamaterials
Di Giovanni, Amedeo	ID:149-Formulation of mean-field model for the accurate prediction of creep deformation of alloy 800H under very-high temperature and low-stress loadings
Di Giusto, Thomas	ID:581- A first-order hyperbolic Arbitrary Lagrangian Eulerian conservation formulation for non-linear solid dynamics in irreversible processes
Dia, Mohamadou Lamine	ID:555-Mechanical response of coextruded multi-nanolayered films of PS/LDPE : How mechanical confinment enables to control PS damage mechanisms
Dias, Marcelo	ID:61-Bistable Anisotropic Conjugate Minimal Surfaces
Dias, Matheo	ID:528-Experimental study of micro-vascular networks embedded in carbon composites for High Energy Physics applications submitted to internal pressure
Diaz Colina, Andrea	ID:469-Mechanics of Anisotropic PVA Hydrogel Fibers as Biomimetic Soft Tissue Substitutes
Diaz Melian, Vicente Luis	ID:210-The elastic Leidenfrost effect: An interplay between vaporization rate, gas flow rate, and shape.
Diddige, Vikas	ID:516- A multi-field mixed incremental variational framework for phase-field modeling of hydrogen-promoted fracture
Diehl, Martin	ID:545-Determination of Crystal Plasticity Parameters from In-Situ Synchrotron Diffraction ID:459-Retained Austenite in Advanced Steels: An experimentally-informed DAMASK Crystal plasticity analysis
Dimanov, Alexandre	ID:482-Micromechanical study of synthetic rock salt by X-ray µCT in situ triaxial tests
Dingle, Monica	ID:588-Multiscale modelling of the effect of surface piezoelectricity in finite samples
Diorio, Tyler C.	ID:573-Examining force-dependent density-reductions and tau mislocalization in dendritic spines with concomitant alterations in network dynamics in TBI-on-a-chip
Dixit, Amit Rai	ID:567- Residual stress and surface integrity of selective laser melted 316L SS: A correlation between experimental and modelling results
Dlouhý, Ivo	ID:121-Testing and phase-field modeling of fracture in Al2O3/Cr and Al2O3/AlSi12 metal-matrix composites under quasi-static and dynamic loads
Dobricic, Marko	ID:25-Biomimetic 3D printed poly (glyceryl sebacate)/collagen composite scaffolds for cartilage defect repair
Dohmen, Ralf	ID:292-Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films
Doitrand, Aurélien	ID:53-When phase field met the coupled criterion
Dollé, Quentin	ID:397-From thermal activity in DED process to microstructure prediction
Domagalski, Łukasz	ID:229-Optimization and analysis of plates with a variable mass distribution in terms of dynamic properties
Domino, Lucie	ID:73-Coalescence of slender structures removed from a liquid bath
Domino, Lucie	ID:150-Delamination from an adhesive sphere: Curvature-induced dewetting versus buckling
Domínguez, Jaime	ID:239-Mechanic-Based Therapies in Osteoporosis: A Multimodal approach
Domínguez López, Guillermo	ID:112-Experimental screening of mechanical and corrosion behavior as well as biocompatibility of Zn alloys for biomedical applications
Doriat, Aurélien	ID:180-Aero-thermo-chemo-mechanical couplings and aging occurring during exposure of polymer materials under high-speed airflow at high temperature.
Dorignac, Eva	ID:180-Aero-thermo-chemo-mechanical couplings and aging occurring during exposure of polymer materials under high-speed airflow at high temperature.
Dorin, Thomas	ID:593- Aluminium alloys for Additive Friction Stir Deposition manufacturing
Dorn, Charles	ID:162-Systematic design of spatially graded metamaterials for wave guidance
Dorn, Christian	ID:318-Thin-film stripe-shaped magnetic domain continuum theory
Dorronsoro, Aritz	ID:384-Micro-scale Characterisation of Residual Stresses Generated during Face Turning using Focused Ion Beam Milling and Digital Image Correlation
Doyle, Lucia	ID:471-On the identification of stretching-dominated topologies based on Triply Periodic Minimal Surfaces
Draux, Ayrton	ID:51-Essential role of papillae flexibility in nectar capture by bees ID:50-Wrinkling of indented sheets on viscous fluid
Du, Nina	ID:482-Micromechanical study of synthetic rock salt by X-ray µCT in situ triaxial tests
Duarte, Teresa	ID:498-Assessing the energy absorption capability of sustainable hybrid composites ID:476-Energy absorption capability of novel composite materials employed in mechanicallyfastened joints
Duarte Martinez, Fabian	ID:81-Effect of Contamination Morphology on Stress Corrosion Cracking and Fatigue Life
Duarte-Cordon, Camilo	ID:300-A nonlinear anisotropic viscoelastic model of the macaque rhesus cervix to quantify cervical remodeling
Dubois, Alizée	ID:520-Fast cracks in amorphous polymers: unraveling the interplay between near-tip microcracking dynamics and macroscale fracture mechanics
Duchemin, Laurent	ID:132-Mechanical response of a hydrogel: from small deformations to the dehydration-induced glass transition
Duchet-Rumeau, Jannick	ID:155-Numerical simulation of additive manufacturing based on fused deposition modeling: Application to the prediction of geometric deviations and mechanical performances of 3D printed prosthetic devices
Duchêne, Laurent	ID:149-Formulation of mean-field model for the accurate prediction of creep deformation of alloy 800H under very-high temperature and low-stress loadings
Dudarev, Sergei	ID:276-Theoretical Investigation of Fast Low-Temperature Irradiation Creep - Development of a parameter-free digital shadow for quantitative predictions ID:278-Experimental Investigation of Fast Low-Temperature Irradiation Creep – A Novel Experiment for Materials Testing under Extreme Conditions ID:201-Multi-scale modelling of irradiated metallic materials for fusion reactors
Dumas, Odeline	ID:508-Development of new lean titanium alloys presenting increased work-hardening and defect tolerance through Reorientation Induced Plasticity
Dunne, Fionn P.E.	ID:169-Crystal Plasticity Modelling of Zirconium Welds under Cyclic Irradiation-Temperature Synergy ID:22-A Microstructure-Sensitive Analytical Solution for Short Fatigue Crack Growth Rate in Metallic Materials
Durst, Karsten	ID:398-Doping-regulated room-temperature dislocation plasticity in SrTiO3: a nanoindentation approach
Durville, Damien	ID:271-Study of the compressive behavior of polymer cable in a rubber matrix
Dwivedi, Suryank	ID:567- Residual stress and surface integrity of selective laser melted 316L SS: A correlation between experimental and modelling results
Dæhli, Lars Edvard Blystad	ID:444-Micromechanically-based computational modelling of ductile solids incorporating non-uniform void size distributions
Démery, Vincent	ID:150-Delamination from an adhesive sphere: Curvature-induced dewetting versus buckling
Dépinoy, Sylvain	ID:285-Characterization of cleavage initiation sites in relation to the microstructure and tempering conditions of a Reactor Pressure Vessel steel
Díaz Lantada, Andrés	ID:425-Laser powder bed fusion of NiTi alloy parts for cardiovascular applications
E
Echeverri Restrepo, Sebastian	ID:153-Mechanistic origin of screw dislocation strengthening by interstitials in advanced high-strength steels
Echeverry-Rendon, Monica	ID:25-Biomimetic 3D printed poly (glyceryl sebacate)/collagen composite scaffolds for cartilage defect repair ID:112-Experimental screening of mechanical and corrosion behavior as well as biocompatibility of Zn alloys for biomedical applications
Egèle, Antoine	ID:429-Agglomerate crack propagation under micro-compression as seen by phase-contrast tomography
Ehret, Alexander	ID:67-Stretching the endothelium: characterization and modeling of mechanical damage in young and aged endothelial cells.
Ekh, Magnus	ID:409-A gradient-enhanced phase-field crystal plasticity model for ductile failure predictions ID:378-Simulation methodology for predicting initiation of surface cracks in railway rails
El Bartali, Ahmed	ID:242_Stress field estimation for a 316L stainless steel through full-field measurement ID:397-From thermal activity in DED process to microstructure prediction ID:234-Experimental investigation of early strain localizations of ferrite-pearlite steel with microstructure gradient under cyclic loading.
El Dakdouki, Rami	ID:221-Development of repair of large stainless steel parts by direct metal deposition for the energy sector
El Khatib, Omar	ID:122-Collapse of hierarchical honeycombs with sandwich-structured cell walls
El Khatib, Omar	ID:486-Rate-Independent Phase-Field Framework for Hysteretic Behavior of Phase Transforming Solids
El May, Mohamed	ID:598- Identification of the corrosion fatigue crack initiation and propagation lives using in-situ electrochemical measurements of the LPBF 316L
El Said, Bassam	ID:315-Geometrically Informed Material Clustering for Data-Driven Multi-scale Modelling of Complex Material Architectures ID:427-Characterising the effect of void morphology on composites strength using deep learning
El Shawish, Samir	ID:214-Semi-Analytical Model of Grain Boundary Stresses in Elastic Polycrystals ID:245-Numerical Implementation of Strain Gradient Crystal Plasticity in Irradiated Polycrystalline Aggregates Using FFT-Homogenization Method
El-Kettani, Mounsif Ech-Cherif	ID:241- Influences of mechanical and water aging on changes in mechanical behavior and damage mechanisms on sandwich structures used as windturbine blades in marine environment (EMR)
Elguedj, Thomas	ID:411-Characterization of keyhole regime for Laser Powder Bed Fusion: from single track formation to multi layers volume, the change in laser and matter interaction ID:155-Numerical simulation of additive manufacturing based on fused deposition modeling: Application to the prediction of geometric deviations and mechanical performances of 3D printed prosthetic devices
Elsherkisi, Mustafa	ID:81-Effect of Contamination Morphology on Stress Corrosion Cracking and Fatigue Life
Engels, Tom	ID:499-Constitutive modelling of injection moulded short-fiber reinforced polypropylene: characterisation and model application ID:434-Capturing fatigue crack propagation of isotactic polypropylene: effects of temperature and molecular weight
Engrand, Godefroy	ID:449-A nonlinear variational model of cracks and dislocations
Eon, Luis	ID:255-Modeling of Short Crack Propagation: Coupling Phase Field Method with Discrete Dislocation Dynamics
Eredia, Matilde	ID:304-New Mechanics in Cell-Nanomaterial Interactions: Boron Nitride Nanosheets Inducing Water Channels Across Lipid Bilayers
Erice, Borja	ID:596-Fracture mechanisms in largely strained steels due to self-contacting surface defects: experiments and modelling ID:595- Optimization of Easy Open Ends for Food Can Packaging: A Comprehensive Material Analysis Approach
Escobar, Ignacio	ID:183-Fatigue crack nucleation mechanisms in Ni-based superalloys subjected to strain-controlled cyclic deformation
Esmaeilzadeh, Reza	ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Espinal, Michael	ID:500-Role of topology on the dynamic response of spinodal meta-materials
Estevez, Rafael	ID:53-When phase field met the coupled criterion
F
Fabing, Emmanuel	ID:555-Mechanical response of coextruded multi-nanolayered films of PS/LDPE : How mechanical confinment enables to control PS damage mechanisms
Fagerström, Martin	ID:403-Automatic voxel-based generation of 3D mesostructures of stochastic tow-based discontinuous composites for the prediction of elastic properties ID:327-Mesoscale modelling of complex textile-reinforced composite materials using the finite cell method
Fagiano, Christian	ID:267-Numerical and experimental study of the effects of initial defects on the compressive and buckling behaviour of composites stiffened panels
Fall, Abdoulaye	ID:72-Microstructure characterization of unsaturated wet granular materials using x-ray microtomography
Falope, Federico Oyedeji	ID:147-Analytic insights on isotropic energy forms based on experiments of finite torsion
Fan, Yue	ID:89-Modulating Grain Boundary-Mediated Plasticity of High-entropy Alloys via Chemo-Mechanical Coupling
Fan, Zhangchen	ID:157-A Discontinuous Galerkin Finite Element Scheme for A Dislocation Density Transport Based Crystal Plasticity Formulation
Fang, Shuyang	ID:300-A nonlinear anisotropic viscoelastic model of the macaque rhesus cervix to quantify cervical remodeling
Fang, Xufei	ID:398-Doping-regulated room-temperature dislocation plasticity in SrTiO3: a nanoindentation approach
Farag, Mohammed	ID:369-Characterization of High-Strength Aluminum Alloys Lattice Structures produced using Laser Powder Bed Fusion
Favache, Audrey	ID:191-Nanoindentation of strong and ductile Al2O3/Al hybrid nanolaminates
Favata, Antonino	ID:111-Competition between epithelial tissue elasticity and surface tension in cancer morphogenesis ID:252-Emerging anisotropy and tethering with memory effects in fibrous materials
Favergeon, Jérôme	ID:493- In-situ thermal monitoring during direct energy deposition: the links between process parameters, thermal cycles and microstructures
Favier, Damien	ID:429-Agglomerate crack propagation under micro-compression as seen by phase-contrast tomography
Faye, Anshul	ID:167-Study of crack-tip damage initiation in anisotropic aneurysmatic tissues
Feaugas, Xavier	ID:408- O-embrittlement and microstructure effects on fatigue life of quasi-alpha Ti alloys
Feichtmayer, Alexander	ID:276-Theoretical Investigation of Fast Low-Temperature Irradiation Creep - Development of a parameter-free digital shadow for quantitative predictions ID:278-Experimental Investigation of Fast Low-Temperature Irradiation Creep – A Novel Experiment for Materials Testing under Extreme Conditions
Feld-Payet, Sylvia	ID:248-Influence of yield surface on stress redistribution and strain localization in a flat notched sample for turbine disk application
Feltovich, Helen	ID:300-A nonlinear anisotropic viscoelastic model of the macaque rhesus cervix to quantify cervical remodeling
Feng, Shaoheng	ID:38-Image-based finite element method applied to in-situ x-ray tomography compression tests of open cell polymeric foams
Fernandez-de la Torre, Miguel	ID:87-Magneto-mechanical system to evaluate mechanical and functional responses in astrocytes under alternating substrate deformation modes
Fernández, Cristina	ID:583-The role of fiber breakage in compression after impact of thermoplastic composites: insights from novel experimental techniques.
Fernández Maestu, Josu	ID:404-Exploring magnetorheological elastomer fracture via phase-field modeling
Fernández Peña, María Teresa	ID:280-Development of a simulation model of the thermoforming process of polymer matrix composite materials and definition of a Forming Limit Curve to identify defects and optimize their manufacture ID:282-The influence of matrix and fibers on the mechanical response of recycled fiber-reinforced polymer composites from aeronautic sector
Fernández-Méndez, Sonia	ID:587-Computational homogenization and topology optimization of flexoelectricity-based metamaterials for apparent piezoelectricity
Ferrara, Enzo	ID:389-Relating laser powder bed fusion process parameters to (micro)structure and to soft magnetic behaviour in a Fe-based bulk metallic glass ID:556- Influence of Thickness on the (Micro)structure and the Magnetic behavior of Kuamet6B2 Thin Walls
Feyne, Florian	ID:131-Investigation of mechanical dissipation effects during cyclic nanoindentation of thermally aged filled elastomer networks
Finel, Alphonse	ID:109-Phase-field modelling of interactions between extended defects in metals placed under extreme conditions ID:449-A nonlinear variational model of cracks and dislocations ID:288-A quantitative phase-field study of hydrogen embrittlement in metals
Fiore, Louison	ID:177-Softening and stiffening of pressurized cellular solids: Experiments and modelling
Fiore, Louison	ID:281-Macroscopic mechanical properties of pressurized cellular solids
Fisk, Martin	ID:360-Evaluation of elasticity in binary ordered systems by phase-field crystal simulations
Fivel, Marc	ID:128-Flexible strain-gradient crystal plasticity models : towards comprehensive modeling of size effects. ID:287-Parallel versus series decomposition in modeling higher-order effects in gradient-enhanced plasticity theories
Flandre, Denis	ID:401-Strain engineering of thin semiconductor films investigated using the residual-stress-actuated on-chip testing method
Fleck, Norman	ID:359-Strain gradient plasticity of constrained thin lithium layers subjected to compression and shear
Fletcher, David	ID:148-Accelerated modelling of ratchetting and shear strain induced plastic damage accumulation in rail steels using GPU based parallel computing. ID:182-A fuzzy inference model for prediction of delay risk associated with low rail-wheel adhesion
Florio, Kevin	ID:547-Operando tomographic microscopy during laser-based powder bed fusion.
Forest, Samuel	ID:125-Ductile fracture of materials with randomly distributed defects ID:287-Parallel versus series decomposition in modeling higher-order effects in gradient-enhanced plasticity theories
Forest, Samuel	ID:99-Deformation modes and damage mechanisms of a basal-textured ZnAlMg coating under multiaxial loading
Forest, Samuel	ID:568-Phase-field Cosserat Crystal Plasticity Towards Modelling Nucleation In Recrystallization ID:257-Characterization of the deformed state before the onset of recrystallization in pure aluminium by in situ SEM tensile tests and CPFEM simulations ID:248-Influence of yield surface on stress redistribution and strain localization in a flat notched sample for turbine disk application ID:128-Flexible strain-gradient crystal plasticity models : towards comprehensive modeling of size effects. ID:283-Finite element simulations of jerky flow in nickel-based superalloy IN718 ID:519-A gradient crystal plasticity model with two length scale parameters ID:342-Macroscopic intermittent plasticity model by avalanches
Fossard, Frédéric	ID:179-Experimental characterisation of the hardening mechanisms of an aluminium alloy produced by the L-PBF process
Foster, Steve	ID:498-Assessing the energy absorption capability of sustainable hybrid composites
Franklin, Francis	ID:148-Accelerated modelling of ratchetting and shear strain induced plastic damage accumulation in rail steels using GPU based parallel computing.
Fratzl, Peter	ID:196-Multiscale geometric design of friction-based interleaved membranes
Fricke, Clemens D.	ID:74-Elastic-plastic lattice materials - machine learning based constitutive modeling
Fritz, Simon	ID:179-Experimental characterisation of the hardening mechanisms of an aluminium alloy produced by the L-PBF process
Fu, Jinlong	ID:539-Designing achitected structures with tailored transport-thermal-mechanical performance using data-driven methods
Fuentealba, Juan Francisco	ID:395-Control and instabilities of fracture paths when tearing brittle sheets
Fèvre, Mathieu	ID:179-Experimental characterisation of the hardening mechanisms of an aluminium alloy produced by the L-PBF process
G
Gaillard, Quentin	ID:373-Effect of post-processing heat treatments on mechanical anisotropy of Ti-6Al-4V alloy fabricated by L-PBF
Gaillard, Yves	ID:349-A finite element model of TiAl/TiAlN nano-multilayered coatings
Gaillard, Yves	ID:237-An imaging technique for the strain-engineering of deformable electrodes
Galadima, Yakubu Kasimu	ID:42-Recent Advances in Peridynamics
Gallaway, Glynn	ID:227- Quasi-brittle Fracture Mechanics and Human Cortical Bone
Gallino, Isabella	ID:389-Relating laser powder bed fusion process parameters to (micro)structure and to soft magnetic behaviour in a Fe-based bulk metallic glass ID:556- Influence of Thickness on the (Micro)structure and the Magnetic behavior of Kuamet6B2 Thin Walls
Galán López, Jesús	ID:466-Crystal plasticity and misorientation dependent homogenisation in the APL programming language
Gandhi, Vatsa	ID:500-Role of topology on the dynamic response of spinodal meta-materials ID:536-Reassessing Strain Gradient Elasticity in Architected Solids: Unveiling Intriguing Meta Behaviours
Ganghoffer, Jean-Francois	ID:601-Analysis of surface effects based on first and second strain gradient mechanics
Gao, Huajian	ID:304-New Mechanics in Cell-Nanomaterial Interactions: Boron Nitride Nanosheets Inducing Water Channels Across Lipid Bilayers ID:71-Harnessing Gradients for Self-Assembly of Peptide-Based Nanocapsules: A Pathway to Advanced Drug Delivery Systems
Garambois, Anna	ID:261-Experimental study and modeling of bending behavior in temperature of a SMAT-treated Ni-based superalloy
Garcia, Javier	ID:337-X-ray in-situ testing and numerical analysis of SLS manufactured lattice structures
Garcia Gonzalez, Daniel	ID:235-Dynamic Actuation Modes in Magneto-Responsive Bistable Structures: A Rate-Dependent Approach ID:11-Thermo-electro-mechanical microstructural interdependencies in conductive composites ID:87-Magneto-mechanical system to evaluate mechanical and functional responses in astrocytes under alternating substrate deformation modes ID:86-Experimental and computational analysis of magneto-mechanically induced diffusion processes in ultra-soft hydrogels ID:43-Model-Driven Identification Framework for Optimal Constitutive Modelling from Kinematics and Rheological Arrangement ID:134-Experimental and numerical insights into filament coalescence during printing
Garcia-Suarez, Joaquin	ID:575-Dynamics of fluid-mediated approach of a soft solid to rigid interface
García, Juan Manuel	ID:267-Numerical and experimental study of the effects of initial defects on the compressive and buckling behaviour of composites stiffened panels
García Díez, Ander	ID:404-Exploring magnetorheological elastomer fracture via phase-field modeling
García García, Ane	ID:404-Exploring magnetorheological elastomer fracture via phase-field modeling
Garrido, Conrado	ID:118-On the connection between cellular design, defects, and fatigue performance in additively manufactured metamaterials ID:130-Influence of processing defects on the mechanical performance of additively manufactured titanium cellular materials
Garulli, Torquato	ID:174-Constructing a database of Fully-Uncoupled Multi-Directional (FUMD) specimens for delamination testing
Garyfallogiannis, Konstantinos	ID:543-Defining Fracture Toughness for Hydrogels
Garzón Hernández, Sara	ID:86-Experimental and computational analysis of magneto-mechanically induced diffusion processes in ultra-soft hydrogels ID:134-Experimental and numerical insights into filament coalescence during printing
Gaslain, Fabrice	ID:99-Deformation modes and damage mechanisms of a basal-textured ZnAlMg coating under multiaxial loading
Gaspar, F.J.	ID:417-Mechanochemical inhibition of growth in avascular tumours
Gatti, Riccardo	ID:255-Modeling of Short Crack Propagation: Coupling Phase Field Method with Discrete Dislocation Dynamics
Gaudez, Steve	ID:442- In-process alteration of Ti6Al4V microstructure during additive manufacturing ID:485-Decoupling elastic and thermal strains in operando X-ray diffraction measurements in directed energy deposition additive manufacturing using fast numerical strategy
Gauquelin, Nicolas	ID:292-Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films
Gautier, Romain	ID:75-Heterogeneities in solid-state MLFS additively manufactured 7075 aluminium alloy
Gavini, Vikram	ID:13-Effect of hydrogen on plasticity of α-Fe: a multi-scale assessment
Geers, Marc	ID:572-Unraveling martensite micro-mechanics, by nano- to macro-scale in-situ testing & CP modelling ID:366-Multi-scale computational homogenization for interfaces with serrated deformation towards an enriched cohesive interface model ID:336-An uncoupled two-scale finite element model to investigate air entrapment during PET polymer thin film lamination ID:105-A continuum consistent discrete particle method: phase changes and scratching of silicon
Geertsen, Valérie	ID:115-3D printed polymers by photopolymerization: link between resin chemistry, printing parameters and mechanical properties
Gehring, Florian	ID:241- Influences of mechanical and water aging on changes in mechanical behavior and damage mechanisms on sandwich structures used as windturbine blades in marine environment (EMR)
Genée, Julien	ID:356-Advanced characterization techniques to inform digital twins of deformed Inconel 718 and predict plastic localization using FFT-based simulations
Georges, Cédric	ID:223-Valorization of titanium Ti-6Al-4V scrap into high added value powders for manufacturing technologies ID:221-Development of repair of large stainless steel parts by direct metal deposition for the energy sector
Germain, Jeremy	ID:483-Toward realistic simulation of transient events within an efficient workflow using implicit and explicit solver: Application on laminated composite materials ID:129-Particular risk assessment and subsequent shielding: Numerical validation of promising concepts
Geveling, Rosa A. M.	ID:211-Micro-mechanical modeling of semi-crystalline PEEK
Gharbi, Hakim	ID:485-Decoupling elastic and thermal strains in operando X-ray diffraction measurements in directed energy deposition additive manufacturing using fast numerical strategy
Ghavimi, Amir Hossein	ID:389-Relating laser powder bed fusion process parameters to (micro)structure and to soft magnetic behaviour in a Fe-based bulk metallic glass ID:556- Influence of Thickness on the (Micro)structure and the Magnetic behavior of Kuamet6B2 Thin Walls
Ghiglione, Flavien	ID:568-Phase-field Cosserat Crystal Plasticity Towards Modelling Nucleation In Recrystallization
Giampietro, Costanza	ID:67-Stretching the endothelium: characterization and modeling of mechanical damage in young and aged endothelial cells.
Gigliotti, Marco	ID:180-Aero-thermo-chemo-mechanical couplings and aging occurring during exposure of polymer materials under high-speed airflow at high temperature.
Gil, Antonio Javier	ID:581- A first-order hyperbolic Arbitrary Lagrangian Eulerian conservation formulation for non-linear solid dynamics in irreversible processes
Gilbert, Mark R	ID:201-Multi-scale modelling of irradiated metallic materials for fusion reactors
Giljean, Sylvain	ID:350-Residual stress level of fiber-reinforced composite laminates : influence of manufacturing conditions ID:349-A finite element model of TiAl/TiAlN nano-multilayered coatings
Gille, Maryse	ID:92-Crystallographic effects on strain heterogeneity and fracture revealed by X-ray lab tomography and crystal plasticity simulations for a 6016 aluminium alloy under plane strain tension
Gilmour, Stan	ID:203-Mechanics in Forensic Science: predicting Traumatic Brain Injury via mechanics enhanced machine learning
Giraud, Albert	ID:507- Incremental variational approach coupling gradient damage with poroelasticity of saturated media
Girault, Florian	ID:224-Investigating the role of microstructural features in plastic deformation of friction-stir deposited aluminum
Gitman, Inna	ID:175-Modelling of Recycled Fibre-Reinforced Polymer Composites ID:240-Multiscale Analysis of Elastomer-Based Composite Materials Using Strain Energy Homogenisation ID:138-Multi-scale modelling of material with heterogeneous random micro-structure ID:213-Data-driven methodologies to estimate process parameters, design parameters and mechanical properties of fused deposition modelling polylactide components ID:182-A fuzzy inference model for prediction of delay risk associated with low rail-wheel adhesion
Gizzi, Alessio	ID:523- Insulin fluid dynamics and absorption via subcutaneous injection port: a computational study addressing flow obstructions and tissue heterogeneities ID:420-Multiphysics behaviour of photo-activated polymers for tissue bioprinting
Glavas, Vedran	ID:277-Chemo-mechanical Damage Modeling of the Impact of Microstructure on Performance and Cracking in Polycrystalline Lithium-ion Battery Cathode Active Material
Godet, Stephane	ID:508-Development of new lean titanium alloys presenting increased work-hardening and defect tolerance through Reorientation Induced Plasticity
Goldbeck, Hauke	ID:35-Numerically efficient solution methods in highly nonlinear variational thermomechanics
Gomez, Michael	ID:238-Waltzing with Instabilities to Morph Rotating Structures
Gomez Benito, María Josè	ID:12-A constitutive model of the cell nucleus: chemo-mechanical coupling and negative Poisson's ratio
Gomez-Cruz, Clara	ID:87-Magneto-mechanical system to evaluate mechanical and functional responses in astrocytes under alternating substrate deformation modes
Gonzalez, Carlos	ID:471-On the identification of stretching-dominated topologies based on Triply Periodic Minimal Surfaces ID:345-High-Throughput MD Simulations and multi-model Molecular Representations for Copolymer Property Assessmen ID:392-Effect of fibre rotation on the coupling between matrix cracking and delamination. ID:541-Deep-learning-based impact localization in PAEK/CF panels ID:385-Determination of Fracture Parameters in Structural Composites using AI
Gonzàlez, Iban	ID:90-Development of adaptative printing parameters for enhanced productivity of L-PBF printed AlSi10Mg
González-Rico Iriarte, Jorge	ID:86-Experimental and computational analysis of magneto-mechanically induced diffusion processes in ultra-soft hydrogels
González-Saiz, Ernesto	ID:43-Model-Driven Identification Framework for Optimal Constitutive Modelling from Kinematics and Rheological Arrangement
Gopal, K V Nagendra	ID:512-Numerical study of the influence of woven roving mat reinforcement on shape deformation, fixity, and recovery of shape memory polymer composite beams
Gopi, Jishnu Vinayak	ID:450-Geometric and Constitutive Modeling of MgO-C Refractories Based on Recyclates for Thermo-Mechanical Simulations: Influence of Graphite Flakes
Gourgues-Lorenzon, Anne-Françoise	ID:285-Characterization of cleavage initiation sites in relation to the microstructure and tempering conditions of a Reactor Pressure Vessel steel
Govaert, Leon	ID:499-Constitutive modelling of injection moulded short-fiber reinforced polypropylene: characterisation and model application ID:434-Capturing fatigue crack propagation of isotactic polypropylene: effects of temperature and molecular weight ID:211-Micro-mechanical modeling of semi-crystalline PEEK
Govaert, Leon	ID:93-Structure-Property Relations for Semi-Crystalline iPP Polymorphs
Govaert, Leon	ID:577-No Yield Stress for Yield-Stress Fluids
Grabec, Tomas	ID:236-Cubic symmetry preservation and homogeneity in elastic properties of β+ω and β+α Ti-alloys. An ultrasound-based study
Graule, Thomas	ID:547-Operando tomographic microscopy during laser-based powder bed fusion.
Gravouil, Anthony	ID:53-When phase field met the coupled criterion
Gray, Simon	ID:81-Effect of Contamination Morphology on Stress Corrosion Cracking and Fatigue Life
Greco, Francesco	ID:587-Computational homogenization and topology optimization of flexoelectricity-based metamaterials for apparent piezoelectricity
Greff, Christian	ID:247-Controlling damage localization through hierarchical microstructure
Grega, Ivan	ID:487-Energy-conserving equivariant GNN predictions of stiffness for lattice materials
Griesbach, Claire	ID:310-Domain switching mechanisms dictating the bulk ferroelectric response
Grolimund, Daniel	ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Grondin, Jérémy	ID:168-Mechanical heterogeneities in spherulitic microstructures of semi-crystalline polymers: quantitative characterization from micrometric to nanometric scales using nanoindentation and atomic force microscopy
Gu, Tang	ID:97-Modeling the Statistical Distribution of Fatigue Crack Formation Lifetime in Large Volumes of Polycrystalline Microstructures
Guedes Sales, Daniella	ID:117-Hydrogen-assisted fatigue damage modeling using phase field method
Gueguen, Mikael	ID:540-An extended version of the variational EIV approach for the homogenization of composites with generalized Maxwell matrix
Guenoun, Patrick	ID:416-AI-based design of optimal architectures for ultra-light isotropic microtruss-based metamaterials ID:115-3D printed polymers by photopolymerization: link between resin chemistry, printing parameters and mechanical properties
Guerra, Claudia	ID:520-Fast cracks in amorphous polymers: unraveling the interplay between near-tip microcracking dynamics and macroscale fracture mechanics
Guessasma, Sofiane	ID:260-Effect of processing on morphological features and mechanical properties of extruded pea starch-protein composites
Guha, Anirban	ID:561-Cruciform Specimen Design and Optimization for Biaxial Testing of Carbon Fiber Reinforced Polymer Composites
Guichard, Hugo	ID:470-Cellular automaton modeling of bainite in steels
Guiducci, Lorenzo	ID:196-Multiscale geometric design of friction-based interleaved membranes
Guilhem, Yoann	ID:284-Post-processing of displacement fields from digital image correlation for non-local variables and crack initiation criteria identification in fretting-fatigue ID:303-Quantifying stress intensity factors in fretting tests via digital image correlation
Guillaume, Vincent	ID:134-Experimental and numerical insights into filament coalescence during printing
Guillon, Maxence	ID:411-Characterization of keyhole regime for Laser Powder Bed Fusion: from single track formation to multi layers volume, the change in laser and matter interaction
Guin, Laurent	ID:294-Effect of Stress and Viscoplastic Behavior on the Electrochemical Response of Amorphous Silicon Electrodes
Gulfo, Luis	ID:403-Automatic voxel-based generation of 3D mesostructures of stochastic tow-based discontinuous composites for the prediction of elastic properties
Guo, Leo	ID:539-Designing achitected structures with tailored transport-thermal-mechanical performance using data-driven methods
Guo, Ya-Fang	ID:89-Modulating Grain Boundary-Mediated Plasticity of High-entropy Alloys via Chemo-Mechanical Coupling
Gupta, Prakhar	ID:479-Large deformations in strain-gradient special Cosserat rods
Gupta, Sayan	ID:251-Local Strain Prediction of single phase polycrystalline materials with low-Rank Approximation.
Gurses, Ercan	High-fidelity Finite Element Simulations of Low-Velocity Impact on [05/903]s CFRP Beam Considering Accurate Experimental Conditions
Gutierrez-Prieto, Eduardo	ID:238-Waltzing with Instabilities to Morph Rotating Structures
Gálvez Díaz-Rubio, Francisco	ID:124-Multiscale analysis of the dynamic behavior of additively manufactured Ti6Al4V architected metamaterials
Gélébart, Lionel	ID:193-Identification of crystal plasticity using microstructures digital twins and machine learning ID:519-A gradient crystal plasticity model with two length scale parameters
Gómez Silva, Francisco	ID:45-Continualization of microstructured plates based on a beam-grid lattice for the development of novel continuum models accounting for scale effects
H
Habraken, Anne Marie	ID:149-Formulation of mean-field model for the accurate prediction of creep deformation of alloy 800H under very-high temperature and low-stress loadings
Hahn, David	ID:536-Reassessing Strain Gradient Elasticity in Architected Solids: Unveiling Intriguing Meta Behaviours
Halima, Ghorbel	ID:199-Prediction of admissible residual stress using fatigue criteria
Hall, Timothy J.	ID:300-A nonlinear anisotropic viscoelastic model of the macaque rhesus cervix to quantify cervical remodeling
Hallberg, Håkan	ID:26-Exploring grain boundary multiplicity by phase field crystal simulations ID:27-Phase field crystal modeling of grain boundary structures in diamond cubic systems
Hamza Siddiqui, Amir	ID:513-Yield locus development of TIG Welded AA2219 alloy using cruciform samples
Han, Xiao	ID:71-Harnessing Gradients for Self-Assembly of Peptide-Based Nanocapsules: A Pathway to Advanced Drug Delivery Systems
Harada, Yoshihisa	ID:244- Inverse Analysis of Defects in CFRP Specimen with Multiple Microscopic Structures by Graph Neural Network Using Stress Distribution of FEM
Haranczyk, Maciej	ID:388- Influence of Lattice Architecture Mixing Strategy for Improved Mechanical Properties in Additively Manufactured Inconel718 Lattices ID:345-High-Throughput MD Simulations and multi-model Molecular Representations for Copolymer Property Assessmen ID:391-Understanding serrated flow in Inconel 718 architected lattices ID:382-A Molecular Dynamics Study of Nanoporous Aluminum Structures with Predefined Topology
Harandi, Ali	ID:437-Neural Operator-Driven Analysis of Heterogeneous Microstructures: Mechanical and Thermal Behaviors
Harcuba, Petr	ID:236-Cubic symmetry preservation and homogeneity in elastic properties of β+ω and β+α Ti-alloys. An ultrasound-based study
Harnisch, Marius	ID:335-Data-driven inelasticity enhanced by neural networks: Opportunities in computational mechanics
Haste, Phoebe	ID:272-Machine learning-based prediction of brain mechanics in sports-like head-to-head collisions
Havet, Peggy	ID:599-Fatigue resistance of chemically pre-aged Short Fiber Reinforced Polyamides
Hayman, Elizabeth	ID:106-Fluid-structure interaction model for hydrocephalus shunt systems
Hazeli, Kavan	ID:17-Synchronous Involvement of Topology and Microstructure to Design Additively Manufactured Lattice Structure ID:29-A Crystal Plasticity Model to Study Stress Localization and Size-Dependent Tensile Properties of Additively Manufactured Nickle-Base Superalloy: Haynes 214™ at elevated Temperature
He, Jianying	ID:368-A Gurson-type model unifying hydrogen enhanced plasticity and decohesion
Heimbs, Sebastian	ID:347-Influence of the Loading Type on the Very High Cycle Fatigue Behaviour of Composite Materials
Helbert, Anne-Laure	ID:161-An investigation of the role of defects on the mechanical response of LPBF-manufactured architected cellular materials with random pores features
Helfer, Thomas	ID:446-Understanding stress-plastic strain evolution of AM 316L steel microstructures due to post process laser scanning: experiment-driven thermomechanical study
Helm, Dirk	ID:448-Machine Learning for Structure-from-Property Guided Microstructures Optimization and Process Design
Henry, Hervé	ID:108-Phase field modeling of crack propgation in heterogeneous materials: effect of the nature of the disorder.
Heremans, Thibaut	ID:306-Alternating ductile and brittle cracking mode in medium manganese steel sheets
Hermann, Svenja	ID:107-Mechanical metamaterials: frequency-independent enriched continua from frequency-dependent models ID:207-Finite-size metamaterials and non-coherent reduced relaxed micromorphic interfaces
Hernández-Escobar, David	ID:562-Micromechanical properties of MnO-SiO2-Al2O3 inclusions in iron
Hesammokri, Parnian	ID:380-Dynamic fractures in brittle isotropic materials analysed by high-speed photography and a dynamic phase-field finite element model
Hild, François	ID:406-Quantification of internal damage during tensile straining of LPBF-manufactured cellular materials with random voids
Hilhorst, Antoine	ID:185- A reappraisal of the essential work of fracture method based on full three-dimensional advanced Gurson-based finite element simulations ID:192-On the characterization of the plane stress fracture toughness of high-entropy alloys at room and cryogenic temperatures
Hirayama, Kenta	ID:244- Inverse Analysis of Defects in CFRP Specimen with Multiple Microscopic Structures by Graph Neural Network Using Stress Distribution of FEM
Hjermitslev, Anders Bæk	ID:223-Valorization of titanium Ti-6Al-4V scrap into high added value powders for manufacturing technologies
Hoefnagels, Johan	ID:572-Unraveling martensite micro-mechanics, by nano- to macro-scale in-situ testing & CP modelling ID:366-Multi-scale computational homogenization for interfaces with serrated deformation towards an enriched cohesive interface model ID:105-A continuum consistent discrete particle method: phase changes and scratching of silicon
Hoffmann, Patrik	ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Holladay, Philomenah	ID:148-Accelerated modelling of ratchetting and shear strain induced plastic damage accumulation in rail steels using GPU based parallel computing.
Hollenweger, Yannick	ID:533-Micro-Mechanics Informed Neural Operator Framework for Multiscale Polycrystalline Material Behaviour
Holmberg-Kasa, Jacob	ID:360-Evaluation of elasticity in binary ordered systems by phase-field crystal simulations
Holthusen, Hagen	ID:551-Discovering Tension-Compression Asymmetry in Plant Tissues Using inelastic Constitutive Artificial Neural Networks
Hong, Joo-Won	ID:55-Deploying Complex shapes using Kirigami
Honkimaki, Veijo	ID:442- In-process alteration of Ti6Al4V microstructure during additive manufacturing ID:485-Decoupling elastic and thermal strains in operando X-ray diffraction measurements in directed energy deposition additive manufacturing using fast numerical strategy
Hooshmand Ahoor, Zahra	ID:64-Numerical study and analytical characterization of soft magnetorheological foams
Hopperstad, Odd Sture	ID:444-Micromechanically-based computational modelling of ductile solids incorporating non-uniform void size distributions ID:596-Fracture mechanisms in largely strained steels due to self-contacting surface defects: experiments and modelling
Hor, Anis	ID:462-Microstructure - defect competition in high cycle fatigue of a duplex stainless steel obtained by laser powder bed fusion
Horezan, Nicolas	ID:179-Experimental characterisation of the hardening mechanisms of an aluminium alloy produced by the L-PBF process
Horst, Peter	ID:347-Influence of the Loading Type on the Very High Cycle Fatigue Behaviour of Composite Materials
Hoummada, Khalid	ID:357-Combining nano-DIC and ACOM TEM to study the ductility enhancement of aluminium films by grain boundary sliding
Hu, Qi	ID:242_Stress field estimation for a 316L stainless steel through full-field measurement
Hua, Hoa-Ai Béatrice	ID:73-Coalescence of slender structures removed from a liquid bath
Huang, Changjin	ID:188-Lipid Peroxidation-induced Membrane Mechanics Modulation and Nanovesicle Shape Transformation
Huang, Dengpeng	ID:240-Multiscale Analysis of Elastomer-Based Composite Materials Using Strain Energy Homogenisation
Huang, Qi	ID:563-Protection effectiveness of energy absorbing floors on elderly fall-related hip fractures using whole-body FE simulations
Hund, Jonas	ID:243-Efficient prediction of strain localisation and limit load in heterogeneous solids via upper bound limit analysis
Hure, Jérémy	ID:521- Influence of irradiation and deformation on slip transfer in austenitic stainless steels ID:332-A combined experimental and numerical study to assess austenitic stainless steels oxidized grain boundaries fracture properties
Höschen, Till	ID:278-Experimental Investigation of Fast Low-Temperature Irradiation Creep – A Novel Experiment for Materials Testing under Extreme Conditions
Hütter, Geralf	ID:354-A monolithic hyperintegrated ROM FE² method with clustered training strategy
Hütter, Markus	ID:205-Simulation framework for the chemical degradation in polymeric solids
I
Iaquinta, Sarah	ID:256-Constitutive modelling of damage-induced stress softening of biological soft materials
Ibarra, Alejandro	ID:344-Plastic chip formation in Swiss cheese the "tête de moine" ID:264- The Y-rod test ID:395-Control and instabilities of fracture paths when tearing brittle sheets ID:394-Pneumatic surface morphing plates fabricated through a direct ink writing ID:259-Harnessing stiffness asymmetry in thin sheets inflatables for high deformation shape morphing ID:55-Deploying Complex shapes using Kirigami
Ibrahim Mamane, Aboubakar Sédick	ID:350-Residual stress level of fiber-reinforced composite laminates : influence of manufacturing conditions
Idrissi, Hosni	ID:292-Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films ID:141-Room temperature electron beam sensitive viscoplastic response of ultra-ductile Al/a-Al2O3 model system ID:319-Stress-induced amorphization and grain boundary sliding in olivine ID:357-Combining nano-DIC and ACOM TEM to study the ductility enhancement of aluminium films by grain boundary sliding
Idrissi, Hosni	ID:191-Nanoindentation of strong and ductile Al2O3/Al hybrid nanolaminates
Imam, Sharib	ID:297-Experimental and numerical investigation of micro-textured tools fabricated using RµEDM in sustainable machining of Ti6Al4V
Intini, Claudio	ID:25-Biomimetic 3D printed poly (glyceryl sebacate)/collagen composite scaffolds for cartilage defect repair
Ioannidou, Katerina	ID:490- On the triaxial compression of dense cohesive granular materials
Iraki, Tarek	ID:448-Machine Learning for Structure-from-Property Guided Microstructures Optimization and Process Design
Isac, N.	ID:151-Icosahedral short-range order mediated twin formation in laser direct energy deposited 316L stainless steel with silicon
Isaksson, Per	ID:380-Dynamic fractures in brittle isotropic materials analysed by high-speed photography and a dynamic phase-field finite element model
Isavand, Samaneh	ID:586-Deformation behavior Analysis of P91 Martensitic Steel: Micropillar Tests and Crystal Plasticity Modelling
Itskov, Mikhail	ID:52-Modeling of open-porous materials based on their microstructure ID:44-Modeling of Softening Behavior by Deep Symbolic Regression
J
Jabbour, Michel	ID:294-Effect of Stress and Viscoplastic Behavior on the Electrochemical Response of Amorphous Silicon Electrodes
Jacquemin, Frédéric	ID:07-Study of the thermal mechanical coupling effect of a lattice core glass fiber epoxy composite sandwich
Jacques, Pascal J.	ID:192-On the characterization of the plane stress fracture toughness of high-entropy alloys at room and cryogenic temperatures ID:306-Alternating ductile and brittle cracking mode in medium manganese steel sheets
Jaddi, Sahar	ID:127-Ultra-miniaturised fracture toughness testing of nanostructured tungsten films in the context of nuclear fusion
Jaddi, Sahar	ID:191-Nanoindentation of strong and ductile Al2O3/Al hybrid nanolaminates
Jadot, Matthieu	ID:75-Heterogeneities in solid-state MLFS additively manufactured 7075 aluminium alloy
Jakob, Raphael	ID:67-Stretching the endothelium: characterization and modeling of mechanical damage in young and aged endothelial cells.
Jamili, Amir	ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Janovska, Michaela	ID:236-Cubic symmetry preservation and homogeneity in elastic properties of β+ω and β+α Ti-alloys. An ultrasound-based study
Jantos, Dustin Roman	ID:165-Thermodynamic topology optimization for hyperelasticity with varying time integration schemes and arc-length control
Janusas, Giedrius	ID:574- Investigation of Dynamic Mechanical Properties of PP Thermoplastic
Javierre, E.	ID:417-Mechanochemical inhibition of growth in avascular tumours
Jayamohan, Jayaratnam	ID:203-Mechanics in Forensic Science: predicting Traumatic Brain Injury via mechanics enhanced machine learning ID:106-Fluid-structure interaction model for hydrocephalus shunt systems
Jean-Baptiste, Marine	ID:223-Valorization of titanium Ti-6Al-4V scrap into high added value powders for manufacturing technologies ID:221-Development of repair of large stainless steel parts by direct metal deposition for the energy sector
Jebahi, Mohamed	ID:128-Flexible strain-gradient crystal plasticity models : towards comprehensive modeling of size effects. ID:287-Parallel versus series decomposition in modeling higher-order effects in gradient-enhanced plasticity theories
Jebalia, Imen	ID:260-Effect of processing on morphological features and mechanical properties of extruded pea starch-protein composites
Jerusalem, Antoine	ID:203-Mechanics in Forensic Science: predicting Traumatic Brain Injury via mechanics enhanced machine learning ID:272-Machine learning-based prediction of brain mechanics in sports-like head-to-head collisions ID:198-The loading of the fetal brain during the second stage of labour ID:106-Fluid-structure interaction model for hydrocephalus shunt systems
Jhabvala, Jamasp	ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Jimenez Mena, Norberto	ID:268-Mechanical characterization of repaired 7xxx aluminum components via Direct Energy Deposition using novel Al-Mg-Zn alloys ID:221-Development of repair of large stainless steel parts by direct metal deposition for the energy sector
Jiménez Segura, Nabor	ID:544-Modeling of hydrogen embrittlement in eutectic high entropy alloys: a FFT-based framework for Phase-Field fracture
Jin, Lishuai	ID:496-Multiperiodic responses and memory effects in frustrated sheets
Johansson, Adam	ID:497- Influence of density on the mechanical properties of dry-formed cellulose fibre network materials
Jones, Michael	ID:203-Mechanics in Forensic Science: predicting Traumatic Brain Injury via mechanics enhanced machine learning ID:198-The loading of the fetal brain during the second stage of labour
Joshi, Akshay	ID:504-Reassessing rubber elasticity through full field X-ray measurements ID:402-Full-field strain measurements in homogeneous solids enabling discovery of new material physics
Josien, Marc	ID:218-Simulation of packing kinetic and diffusive properties of fragment beds using the DEM-FFT method
Jourdan, Thomas	ID:109-Phase-field modelling of interactions between extended defects in metals placed under extreme conditions
Junker, Philipp	ID:165-Thermodynamic topology optimization for hyperelasticity with varying time integration schemes and arc-length control ID:54-Experimental testing of topology optimized structures with hardening material behavior
K
Kairet, Thomas	ID:307-Thermal management from the build platform for laser powder bed fusion of Fe-Si alloys
Kakimoto, Ken-Ichi	ID:208-Modeling and simulation of pyropiezoelectric energy harvesting
Kamasamudram, Vasudevan	ID:361-A strain based Lipschitz regularization in Data Driven Computational Mechanics
Kammer, David	ID:316-Unraveling the Dynamics of Supershear Mode I Crack Growth ID:351-Local to global fracture behavior of 2D lattices
Kaniadakis, Antonio	ID:185- A reappraisal of the essential work of fracture method based on full three-dimensional advanced Gurson-based finite element simulations ID:164-Exploring thickness effect on fracture toughness of thin metal sheets: a parametric analysis with advanced Gurson model
Kanjarla, Anand	ID:13-Effect of hydrogen on plasticity of α-Fe: a multi-scale assessment
Kannan, Krishna	ID:580-Generalized structure tensor-based switchless constitutive relation for arterial tissues
Kannan, Vignesh	ID:310-Domain switching mechanisms dictating the bulk ferroelectric response
Kannenberg, Thea	ID:550-Simulation of Microstructure Evolution by Integrating Crystal Plasticity in the Multiphase-Field Method
Kannojiya, Vikas	ID:178-The Effect of Calcification on the Mechanical Behavior of Clot Analogs for Acute Ischemic Stroke
Kanoufi, Frédéric	ID:237-An imaging technique for the strain-engineering of deformable electrodes
Kanouté, Pascale	ID:408- O-embrittlement and microstructure effects on fatigue life of quasi-alpha Ti alloys
Kanouté, Pascale	ID:261-Experimental study and modeling of bending behavior in temperature of a SMAT-treated Ni-based superalloy
Kansara, Hirak	ID:539-Designing achitected structures with tailored transport-thermal-mechanical performance using data-driven methods
Kaplan, Magdalena	ID:497- Influence of density on the mechanical properties of dry-formed cellulose fibre network materials
Karaseva, Elizaveta	ID:240-Multiscale Analysis of Elastomer-Based Composite Materials Using Strain Energy Homogenisation
Karathanasopoulos, Nikolaos	ID:85-Mechanics of architected interpenetrating phase composites: experimental, numerical and machine learning analysis results ID:249-Hybrid manufacturing of metallic metamaterials: Process, microstructure and mechanical response ID:375-Thermo-mechanical attributes and strain gradient field of materials with uniform and graded inner architectures
Karlapati, Sri	ID:487-Energy-conserving equivariant GNN predictions of stiffness for lattice materials
Karmakar, Prabhat	ID:251-Local Strain Prediction of single phase polycrystalline materials with low-Rank Approximation.
Kashiwar, Ankush	ID:141-Room temperature electron beam sensitive viscoplastic response of ultra-ductile Al/a-Al2O3 model system ID:319-Stress-induced amorphization and grain boundary sliding in olivine ID:357-Combining nano-DIC and ACOM TEM to study the ductility enhancement of aluminium films by grain boundary sliding
Kaszubska, Paulina	ID:231-Design and numerical analysis of bionic – inspired ceiling panels in terms of their dynamic properties. ID:228-Design and numerical analysis of bionic – inspired ceiling panels in terms of the air flow
Katsivalis, Ioannis	ID:403-Automatic voxel-based generation of 3D mesostructures of stochastic tow-based discontinuous composites for the prediction of elastic properties
Katzav, Eytan	ID:32-Yin-Yang spiraling transition of a confined buckled elastic sheet
Kavousi, Majid	ID:63-Geometrical and Crystal Plasticity Modelling of Effects of Microstructure on Mechanical Properties of Additively Manufactured 316L Parts
Kazemi Khasragh, Elaheh	ID:345-High-Throughput MD Simulations and multi-model Molecular Representations for Copolymer Property Assessmen
Kekicheff, Patrick	ID:429-Agglomerate crack propagation under micro-compression as seen by phase-contrast tomography
Kerfriden, Pierre	ID:342-Macroscopic intermittent plasticity model by avalanches
Kermouche, Guillaume	ID:292-Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films
Khalid, Ghaidaa	ID:198-The loading of the fetal brain during the second stage of labour
Khalil, Khaled	ID:07-Study of the thermal mechanical coupling effect of a lattice core glass fiber epoxy composite sandwich
Kick, Miriam	ID:54-Experimental testing of topology optimized structures with hardening material behavior
Kiefer, Bjoern	ID:102-Data-driven simulation of the inelastic behavior of open-cell foam structures ID:354-A monolithic hyperintegrated ROM FE² method with clustered training strategy ID:486-Rate-Independent Phase-Field Framework for Hysteretic Behavior of Phase Transforming Solids ID:219- Characterization of the creep behavior of the nickel-based superalloy 2.4842 utilizing miniature testing techniques and numerical investigations ID:450-Geometric and Constitutive Modeling of MgO-C Refractories Based on Recyclates for Thermo-Mechanical Simulations: Influence of Graphite Flakes
Kiefer, Björn	ID:516- A multi-field mixed incremental variational framework for phase-field modeling of hydrogen-promoted fracture
Kim, David	ID:573-Examining force-dependent density-reductions and tau mislocalization in dendritic spines with concomitant alterations in network dynamics in TBI-on-a-chip
Kirchlechner, Christoph	ID:582-The effect of grain boundaries on the fracture toughness of hard coatings ID:430-Understanding the grain boundary sliding in Ni bicrystal via micromechanical testing ID:478-Understanding twinning mechanisms and measuring twinning stress of CoCrFeNiMn high entropy alloy using micro-mechanical testing
Kirkegaard, Poul Henning	ID:509-Surrogate modelling of springback in thermoformed foam cores
Klatt, Eduard	ID:552-A computational modelling approach of viscoelasticity based on random fields for short fibre-reinforced composites with experimental verification
Kleiven, Svein	ID:563-Protection effectiveness of energy absorbing floors on elderly fall-related hip fractures using whole-body FE simulations ID:511-What can we learn from detailed reconstructions of head injuries? ID:376- In-vivo estimation of white matter tract-related deformation under mild head impacts
Kochmann, Dennis	ID:162-Systematic design of spatially graded metamaterials for wave guidance ID:310-Domain switching mechanisms dictating the bulk ferroelectric response
Kojima, Yuta	ID:244- Inverse Analysis of Defects in CFRP Specimen with Multiple Microscopic Structures by Graph Neural Network Using Stress Distribution of FEM
Kolinski, John	ID:355-Crack tip kinematics reveal the process zone structure in brittle hydrogel fracture ID:363-Toughening of brittle solids via crack front complexity
Koller, Martin	ID:295-Anisotropic elasticity of strongly textured Ti studied by resonant ultrasound spectroscopy
Kommalapati, Rishi	ID:500-Role of topology on the dynamic response of spinodal meta-materials
Kondo, Djimedo	ID:542-An incremental variational homogenization approach of damage in brittle matrix composites ID:507- Incremental variational approach coupling gradient damage with poroelasticity of saturated media
Kong, Xiang	ID:250-Mechanical identification and modelling of impregnated Nb3Sn Rutherford cable stacks under compressive loading
Kopecz-Muller, Caroline	ID:132-Mechanical response of a hydrogel: from small deformations to the dehydration-induced glass transition
Kopp, Alexander	ID:334-Exploring the evolution of mechanical deformation of intact and degraded SLM WE43 scaffolds: An In Situ X-ray Characterization
Koutsos, Vasileos	ID:21-The stab resistance of Bombyx mori silk cocoons
Kouznetsova, Varvara	ID:366-Multi-scale computational homogenization for interfaces with serrated deformation towards an enriched cohesive interface model ID:243-Efficient prediction of strain localisation and limit load in heterogeneous solids via upper bound limit analysis
Kovacevic, Sasa	ID:96-Phase field model of chemo-electro-mechanical processes during corrosion of bioabsorbable Mg alloys for biomedical applications
Kovacevic, Sasa	ID:352-Mass transport in nanoparticle sintering stage of additive manufacturing: Macro- and meso-scale computational models.
Kovachki, Nikola	ID:533-Micro-Mechanics Informed Neural Operator Framework for Multiscale Polycrystalline Material Behaviour
Kowalczyk, Izabela	ID:229-Optimization and analysis of plates with a variable mass distribution in terms of dynamic properties
Kozanecki, Damian	ID:232-Static and Dynamic Analysis of Bidirectionally Sinusoidal Corrugated Steel Shells: A Comparative FEA Study
Kožar, Ivica	ID:331-Verification of a Data driven inverse stochastic models for fiber reinforced concrete
Krishnan, Nikita	ID:573-Examining force-dependent density-reductions and tau mislocalization in dendritic spines with concomitant alterations in network dynamics in TBI-on-a-chip
Kristiawan, Magdalena	ID:260-Effect of processing on morphological features and mechanical properties of extruded pea starch-protein composites
Kristoffersen, Martin	ID:596-Fracture mechanisms in largely strained steels due to self-contacting surface defects: experiments and modelling
Kruhne, Ulrich	ID:525-Computational Study of the Effect of Structural Deformation on Osmotic Membrane Mass Transfer
Kubacka, Ewelina	ID:231-Design and numerical analysis of bionic – inspired ceiling panels in terms of their dynamic properties. ID:230-Experimental measurements of forced vibrations of bionic-inspired ceiling tiles ID:228-Design and numerical analysis of bionic – inspired ceiling panels in terms of the air flow
Kuci, Erin	ID:307-Thermal management from the build platform for laser powder bed fusion of Fe-Si alloys
Kulkarni, Anish Niranjan	ID:529-Micro-mechanical study of residual stresses and strength of induction-cured thermoset composites
Kullerstedt, Adeline	ID:423-Characterising and Modelling the Rate Dependent Mechanical Response of 3D-Fabric Reinforced Composites
Kumar, Deepak	ID:567- Residual stress and surface integrity of selective laser melted 316L SS: A correlation between experimental and modelling results
Kumar, Gordon	ID:170-An anisotropic damage model for strain-softening in rubber-like materials
Kumar, Jaynandan	ID:167-Study of crack-tip damage initiation in anisotropic aneurysmatic tissues
Kumar, Paras	ID:341- Influence of the irreversibility strategy in phase-field fracture models
Kumar, Pranav	ID:13-Effect of hydrogen on plasticity of α-Fe: a multi-scale assessment
Kumar, Rajeev	ID:200-Localizing gradient damage model integrated with smoothed finite element method for simulating quasi-brittle fracture
Kumar, Sachin	ID:200-Localizing gradient damage model integrated with smoothed finite element method for simulating quasi-brittle fracture
Kumar, Sid	ID:539-Designing achitected structures with tailored transport-thermal-mechanical performance using data-driven methods
Kumbhar, Pramod	ID:500-Role of topology on the dynamic response of spinodal meta-materials
Kurpa, Lidiya	ID:263-Investigation of free vibrations of porous functionally graded plates using the R-functions theory
Kwakernaak, Lennard	ID:76-Storing Driving History within Beam Counter Metamaterials
L
L'Hostis, Gildas	ID:350-Residual stress level of fiber-reinforced composite laminates : influence of manufacturing conditions
La Rosa, Lorenzo	ID:220- Twinning hierarchy in NiTi revealed by atomistic modelling of twin interfaces.
Labat, Stéphane	ID:564- In situ three-dimensional observation of plasticity onset in a Pt nanoparticle
Lachambre, Joel	ID:110-Stereo X Ray tomography for high temporal resolution experiments
Lachowski, Dariusz	ID:87-Magneto-mechanical system to evaluate mechanical and functional responses in astrocytes under alternating substrate deformation modes
Lacorre, Paul	ID:265-Nonlinear plate theory for inflatable panels: theoretical, numerical and experimental investigations ID:281-Macroscopic mechanical properties of pressurized cellular solids ID:177-Softening and stiffening of pressurized cellular solids: Experiments and modelling
Lacroix, Florian	ID:131-Investigation of mechanical dissipation effects during cyclic nanoindentation of thermally aged filled elastomer networks
Lafon, Philippe	ID:405-Development of a polyhedral DEM method for simulating the relocation of nuclear fuel during a LOCA.
Lahellec, Noel	ID:542-An incremental variational homogenization approach of damage in brittle matrix composites
Laiarinandrasana, Lucien	ID:233-Mechanisms of deformation and voiding using tomography on neat and glass syntactic polypropylene : Finite Element simulations on flat notched specimens
Laiarinandrasana, Lucien	ID:62-Internally-pressurized plastic pipes mimicked by plane strain grooved tensile (PSGT) specimens
Lalizel, Gildas	ID:180-Aero-thermo-chemo-mechanical couplings and aging occurring during exposure of polymer materials under high-speed airflow at high temperature.
Lamari, Mathias	ID:342-Macroscopic intermittent plasticity model by avalanches
Lame Jouybari, Amirhossein	ID:245-Numerical Implementation of Strain Gradient Crystal Plasticity in Irradiated Polycrystalline Aggregates Using FFT-Homogenization Method
Lamnawar, Khalid	ID:555-Mechanical response of coextruded multi-nanolayered films of PS/LDPE : How mechanical confinment enables to control PS damage mechanisms
Lampoh, Komlanvi	ID:566-A new numerical model for the elasto-plastic behavior of cellular materials
Lanceros-Méndez, Senentxu	ID:404-Exploring magnetorheological elastomer fracture via phase-field modeling
Landis, Chad	ID:86-Experimental and computational analysis of magneto-mechanically induced diffusion processes in ultra-soft hydrogels
Lange, Nils	ID:354-A monolithic hyperintegrated ROM FE² method with clustered training strategy
Langlois, Vincent	ID:94-Multiply scattered sound and strain in a granular suspension
Langseth, Magnus	ID:377- Testing and Modelling of Welded Aluminium Joints
Lanzoni, Luca	ID:147-Analytic insights on isotropic energy forms based on experiments of finite torsion
Lapina, Tatiana	ID:457-Rate-dependent instabilities in soft visco-hyperelastic composites
Lare, Naansonou Patrick	ID:284-Post-processing of displacement fields from digital image correlation for non-local variables and crack initiation criteria identification in fretting-fatigue
Larsson, Fredrik	ID:327-Mesoscale modelling of complex textile-reinforced composite materials using the finite cell method
Laszczyk, Laurent	ID:323-Understanding the impact of the texture on the bendability of aluminium sheets
Laurin, Frédéric	ID:267-Numerical and experimental study of the effects of initial defects on the compressive and buckling behaviour of composites stiffened panels
Lazarus, Arnaud	ID:258-Elasto-granular coupling : how a granular heap deforms a soft substrate
Lazarus, Veronique	ID:330-Dialogue between brittle fracture mechanics and experiments using additive manufacturing to study crack propagation in anisotropic materials
Le, Anh Tuan	ID:294-Effect of Stress and Viscoplastic Behavior on the Electrochemical Response of Amorphous Silicon Electrodes
Le Bouar, Yann	ID:109-Phase-field modelling of interactions between extended defects in metals placed under extreme conditions ID:288-A quantitative phase-field study of hydrogen embrittlement in metals
Le Bouar, Yann	ID:179-Experimental characterisation of the hardening mechanisms of an aluminium alloy produced by the L-PBF process ID:449-A nonlinear variational model of cracks and dislocations
Le Bourhis, Eric	ID:131-Investigation of mechanical dissipation effects during cyclic nanoindentation of thermally aged filled elastomer networks
Le Bris, Claude	ID:314-Coarse approximation of heterogeneous elasticity problems
Le Gué, Louis	ID:348-Ageing of a PBSAT fishing net: a multiscale study
Le Van, Anh	ID:265-Nonlinear plate theory for inflatable panels: theoretical, numerical and experimental investigations
Leask, Richard	ID:68-Patient Characteristics and Biomechanics of Thoracic Aortic Aneurysms
Lebensohn, Ricardo	ID:116-FFT-based methods for data reduction and modelling of micromechanical experiments for advanced characterization of metals
Leblond, Jean-Baptiste	ID:88-The problem of out-of-plane perturbation of a semi-infinite crack in an infinite 3D body revisited
Leclercq, Margot	ID:379-Multiaxial characterization of 3D printed polymers for patient-specific surgical simulators
Leduc, Damien	ID:241- Influences of mechanical and water aging on changes in mechanical behavior and damage mechanisms on sandwich structures used as windturbine blades in marine environment (EMR)
Lee, Chun Hean	ID:581- A first-order hyperbolic Arbitrary Lagrangian Eulerian conservation formulation for non-linear solid dynamics in irreversible processes
Lee, Hyeon	ID:37-The design of lightweight geared mechanical metamaterials optimised for elastic strain energy absorption
Lee, Seunghwan	ID:491- Stiffness, strength, energy dissipation and reusability in architected polycrystals
Lee, Subin	ID:582-The effect of grain boundaries on the fracture toughness of hard coatings ID:430-Understanding the grain boundary sliding in Ni bicrystal via micromechanical testing ID:478-Understanding twinning mechanisms and measuring twinning stress of CoCrFeNiMn high entropy alloy using micro-mechanical testing
Leen, Sean	ID:586-Deformation behavior Analysis of P91 Martensitic Steel: Micropillar Tests and Crystal Plasticity Modelling ID:63-Geometrical and Crystal Plasticity Modelling of Effects of Microstructure on Mechanical Properties of Additively Manufactured 316L Parts
Legoll, Frederic	ID:314-Coarse approximation of heterogeneous elasticity problems
Legros, Marc	ID:332-A combined experimental and numerical study to assess austenitic stainless steels oxidized grain boundaries fracture properties
Leguillon, Dominique	ID:56-Predicting the intrinsic tensile strength of etched glass using the coupled criterion
Lejeunes, Stéphane	ID:246-Modeling Thermo-Mechanical Behavior in Filled Elastomers: Applications to Finite-Element Numerical Simulation
Lengiewicz, Jakub	ID:412-Towards efficient modeling for quantum-informed mechanics of polymers: a DFTB+MBD framework
Lenti, Luca	ID:79-Compressed earth blocks for masonry buildings in seismic zone
Lenton, Isaac	ID:210-The elastic Leidenfrost effect: An interplay between vaporization rate, gas flow rate, and shape.
Leonardi, Selma	ID:161-An investigation of the role of defects on the mechanical response of LPBF-manufactured architected cellular materials with random pores features
Leopoldes, Julien	ID:94-Multiply scattered sound and strain in a granular suspension
Leraillez, Akseli	ID:435-Fracture toughness of hierarchical lattices
Leronni, Alessandro	ID:359-Strain gradient plasticity of constrained thin lithium layers subjected to compression and shear
Lestringant, Claire	ID:08-Higher-order boundary conditions for asymptotic homogenization
Lestringant, Claire	ID:291-Asymptotic higher order homogenization of discrete microstructures
Lestringant, Claire	ID:343-Fracture initiation in a cohesive granular layer
Lewis, Roger	ID:182-A fuzzy inference model for prediction of delay risk associated with low rail-wheel adhesion
Lezaack, Matthieu	ID:209-Improving mechanical properties in Wire Arc Additive Manufacturing of Aluminium Alloys - exploring laser cleaning
Lezaack, Matthieu B.	ID:75-Heterogeneities in solid-state MLFS additively manufactured 7075 aluminium alloy ID:224-Investigating the role of microstructural features in plastic deformation of friction-stir deposited aluminum
Li, Chenzhuo	ID:355-Crack tip kinematics reveal the process zone structure in brittle hydrogel fracture ID:363-Toughening of brittle solids via crack front complexity
Li, Dongfeng	ID:157-A Discontinuous Galerkin Finite Element Scheme for A Dislocation Density Transport Based Crystal Plasticity Formulation
Li, Haopeng	ID:71-Harnessing Gradients for Self-Assembly of Peptide-Based Nanocapsules: A Pathway to Advanced Drug Delivery Systems
Li, Haoyu	ID:89-Modulating Grain Boundary-Mediated Plasticity of High-entropy Alloys via Chemo-Mechanical Coupling
Li, Jian	ID:457-Rate-dependent instabilities in soft visco-hyperelastic composites
Li, Jishuai	ID:75-Heterogeneities in solid-state MLFS additively manufactured 7075 aluminium alloy
Li, Muzi	ID:425-Laser powder bed fusion of NiTi alloy parts for cardiovascular applications
Li, Tianyi	ID:324-Micromechanics-informed parametric deep material network for physics behavior prediction of heterogeneous materials with a varying morphology
Li, Xiao-Tong	ID:89-Modulating Grain Boundary-Mediated Plasticity of High-entropy Alloys via Chemo-Mechanical Coupling
Limodin, Nathalie	ID:234-Experimental investigation of early strain localizations of ferrite-pearlite steel with microstructure gradient under cyclic loading.
Lin, Meichao	ID:368-A Gurson-type model unifying hydrogen enhanced plasticity and decohesion
Lin, Zehui	ID:146-Fabrication and characterization of soft magnetorheological foams
Ling, Chao	ID:157-A Discontinuous Galerkin Finite Element Scheme for A Dislocation Density Transport Based Crystal Plasticity Formulation
Lingua, Alessandra	ID:351-Local to global fracture behavior of 2D lattices
Link, Norbert	ID:448-Machine Learning for Structure-from-Property Guided Microstructures Optimization and Process Design
Linka, Kevin	ID:517-Viscoelastic Constitutive Artificial Neural Networks (vCANNs) - a framework for data-driven anisotropic nonlinear finite viscoelasticity
Lipcsei, Sandor	ID:562-Micromechanical properties of MnO-SiO2-Al2O3 inclusions in iron
Liu, Burigede	ID:533-Micro-Mechanics Informed Neural Operator Framework for Multiscale Polycrystalline Material Behaviour
Liu, Fengxian	ID:175-Modelling of Recycled Fibre-Reinforced Polymer Composites
Liu, Lei	ID:366-Multi-scale computational homogenization for interfaces with serrated deformation towards an enriched cohesive interface model
Liu, Tian	ID:71-Harnessing Gradients for Self-Assembly of Peptide-Based Nanocapsules: A Pathway to Advanced Drug Delivery Systems
Liu, Xin	ID:57-Mechanism of thermally-activated prismatic slip in Mg ID:313-Scale Bridging via Peierls-Nabarro Modeling of Dislocations in Complex Alloys
Liu, Yang	ID:169-Crystal Plasticity Modelling of Zirconium Welds under Cyclic Irradiation-Temperature Synergy ID:22-A Microstructure-Sensitive Analytical Solution for Short Fatigue Crack Growth Rate in Metallic Materials
Liu, Yuyao	ID:25-Biomimetic 3D printed poly (glyceryl sebacate)/collagen composite scaffolds for cartilage defect repair
Liu, Zeyong	ID:374-Critical state seen as an emerging property in granular materials
Llorca, Javier	ID:217-Effect of elastic strains on the catalytic activity of gold thin films for HER and ORR ID:39-Deformation mechanisms of Ti polycrystals from 3D diffraction contrast tomography and high-resolution digital image correlation data: experiments and simulations ID:183-Fatigue crack nucleation mechanisms in Ni-based superalloys subjected to strain-controlled cyclic deformation ID:215-In situ EBSD/HRDIC-based investigation of twin-twin interaction at grain boundaries in Mg ID:25-Biomimetic 3D printed poly (glyceryl sebacate)/collagen composite scaffolds for cartilage defect repair ID:112-Experimental screening of mechanical and corrosion behavior as well as biocompatibility of Zn alloys for biomedical applications
Llorca, Javier	ID:96-Phase field model of chemo-electro-mechanical processes during corrosion of bioabsorbable Mg alloys for biomedical applications ID:24-Combining machine learning and in-situ EBSD to assess the influence of microstructure on twinning in polycrystal Mg
Logé, Roland	ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Long, Daniel	ID:169-Crystal Plasticity Modelling of Zirconium Welds under Cyclic Irradiation-Temperature Synergy ID:22-A Microstructure-Sensitive Analytical Solution for Short Fatigue Crack Growth Rate in Metallic Materials
Lopes, Igor	ID:476-Energy absorption capability of novel composite materials employed in mechanicallyfastened joints
Lopes Pinto, Daniella	ID:77-Simulation of size effects in cracked ductile specimens using a GTN nonlocal model
Lopez Donaire, Maria Luisa	ID:235-Dynamic Actuation Modes in Magneto-Responsive Bistable Structures: A Rate-Dependent Approach ID:134-Experimental and numerical insights into filament coalescence during printing
Lopez Dubon, Sergio	ID:40-Energetics of Mixed-Mode Crack Propagation around Geometric Discontinuities on Thick Composite Structures
Lopez-Pamies, Oscar	ID:09-The nonlinear elastic response of bicontinuous rubber blends
Lopez-Puente, Jorge	ID:585- On the influence of cryogenic temperatures on CFRP laminates subjected to impulsive loadings ID:584-Strain rate influence on the compressive behaviour of holed woven CFRP laminates
Loukaides, Evripides	ID:61-Bistable Anisotropic Conjugate Minimal Surfaces
Louwagie, Erin	ID:198-The loading of the fetal brain during the second stage of labour
Lozano-Steinmetz, Felipe	ID:358-Mechanics and damage tolerance of nanowire network materials
Lu, Tracy	ID:475-Additively Manufactured Jammable Structured Fabrics for Deployable Structures
Lucarini, Sergio	ID:11-Thermo-electro-mechanical microstructural interdependencies in conductive composites ID:404-Exploring magnetorheological elastomer fracture via phase-field modeling
Lucherelli, Matteo Andrea	ID:304-New Mechanics in Cell-Nanomaterial Interactions: Boron Nitride Nanosheets Inducing Water Channels Across Lipid Bilayers
Ludhwani, Mohit	ID:13-Effect of hydrogen on plasticity of α-Fe: a multi-scale assessment
Luplow, Tim	ID:347-Influence of the Loading Type on the Very High Cycle Fatigue Behaviour of Composite Materials
Luppino, Francesco	ID:523- Insulin fluid dynamics and absorption via subcutaneous injection port: a computational study addressing flow obstructions and tissue heterogeneities
Léon Baldelli, Andrès	ID:330-Dialogue between brittle fracture mechanics and experiments using additive manufacturing to study crack propagation in anisotropic materials
M
M. Keleshteri, Mohammad	ID:29-A Crystal Plasticity Model to Study Stress Localization and Size-Dependent Tensile Properties of Additively Manufactured Nickle-Base Superalloy: Haynes 214™ at elevated Temperature
Macek, Domen	ID:551-Discovering Tension-Compression Asymmetry in Plant Tissues Using inelastic Constitutive Artificial Neural Networks
Madeo, Angela	ID:107-Mechanical metamaterials: frequency-independent enriched continua from frequency-dependent models ID:207-Finite-size metamaterials and non-coherent reduced relaxed micromorphic interfaces
Madi, Yazid	ID:77-Simulation of size effects in cracked ductile specimens using a GTN nonlocal model
Mahajan, Peeyush	ID:274-Low cycle fatigue of 22MnB5 cold rolled steel: Insights on Microstructure and Crystallographic Bulk Texture
Maharaja, Hitarth	ID:274-Low cycle fatigue of 22MnB5 cold rolled steel: Insights on Microstructure and Crystallographic Bulk Texture ID:273-Ratcheting behaviour of SS316L at room and low temperatures
Maimí Vert, Pere	ID:589- Experimental Characterisation of Notch non-Linearities in Pseudo-Ductile Composite Laminates
Maire, Eric	ID:110-Stereo X Ray tomography for high temporal resolution experiments ID:337-X-ray in-situ testing and numerical analysis of SLS manufactured lattice structures
Majkut, Marta	ID:334-Exploring the evolution of mechanical deformation of intact and degraded SLM WE43 scaffolds: An In Situ X-ray Characterization
Majnoni D'Intignano, Xavier	ID:598- Identification of the corrosion fatigue crack initiation and propagation lives using in-situ electrochemical measurements of the LPBF 316L
Makowska, Malgorzata	ID:547-Operando tomographic microscopy during laser-based powder bed fusion.
Malet, Loic	ID:508-Development of new lean titanium alloys presenting increased work-hardening and defect tolerance through Reorientation Induced Plasticity
Malik, Alexander	ID:102-Data-driven simulation of the inelastic behavior of open-cell foam structures
Mangas Araujo, Lucas	ID:139-Modelling hydrolytic degradation in rubber networks: discrete stochastic and continuum approaches
Manning, Keefe	ID:178-The Effect of Calcification on the Mechanical Behavior of Clot Analogs for Acute Ischemic Stroke
Marano, Aldo	ID:408- O-embrittlement and microstructure effects on fatigue life of quasi-alpha Ti alloys ID:519-A gradient crystal plasticity model with two length scale parameters
Marechal, Pierre	ID:241- Influences of mechanical and water aging on changes in mechanical behavior and damage mechanisms on sandwich structures used as windturbine blades in marine environment (EMR)
Maresca, Francesco	ID:366-Multi-scale computational homogenization for interfaces with serrated deformation towards an enriched cohesive interface model ID:222-General grain boundary K-test framework for the assessment of liquid metal embrittlement at the atomic scale ID:220- Twinning hierarchy in NiTi revealed by atomistic modelling of twin interfaces. ID:153-Mechanistic origin of screw dislocation strengthening by interstitials in advanced high-strength steels
Marigo, Jean-Jacques	ID:104-Negative refraction in a single-phase flexural metamaterial with hyperbolic dispersion
Marino, Michele	ID:420-Multiphysics behaviour of photo-activated polymers for tissue bioprinting
Markey, Grégoire	ID:49-Influence of the mineral wool microstrucure on its dynamic macroscopic behaviour
Marone, Federica	ID:547-Operando tomographic microscopy during laser-based powder bed fusion. ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Marotti de Sciarra, Francesco	ID:579-Higher-order nanobeams based on stress-driven integral elasticity
Martin, Benjamin	ID:195-A local definition of multiaxiality in elastomers and its application to fatigue testing
Martin, Maria Dolores	ID:337-X-ray in-situ testing and numerical analysis of SLS manufactured lattice structures ID:334-Exploring the evolution of mechanical deformation of intact and degraded SLM WE43 scaffolds: An In Situ X-ray Characterization
Martin Araujo, Douglas	ID:250-Mechanical identification and modelling of impregnated Nb3Sn Rutherford cable stacks under compressive loading
Martin-Montal, Jordi	ID:387-Experimental study of polymer-based 3D auxetic structures manufactured by SLA.
Martinet, Sebastien	ID:490- On the triaxial compression of dense cohesive granular materials
Martinez, Jhon	ID:573-Examining force-dependent density-reductions and tau mislocalization in dendritic spines with concomitant alterations in network dynamics in TBI-on-a-chip
Martino, Esteban	ID:585- On the influence of cryogenic temperatures on CFRP laminates subjected to impulsive loadings
Martínez, Miguel A.	ID:565- In-Silico Modeling of Atherosclerosis: Continuous and Agent-Based Hybrid Approach
Martínez-Alonso, Carmen	ID:217-Effect of elastic strains on the catalytic activity of gold thin films for HER and ORR
Martínez-Esnaola, Jose Manuel	ID:384-Micro-scale Characterisation of Residual Stresses Generated during Face Turning using Focused Ion Beam Milling and Digital Image Correlation
Martínez-Pañeda, Emilio	ID:96-Phase field model of chemo-electro-mechanical processes during corrosion of bioabsorbable Mg alloys for biomedical applications ID:464-Phase field modelling of fractures in ice sheets and glaciers ID:465-Phase field modelling of fatigue in inert and hydrogen-containing environments
Mas, Fanny	ID:323-Understanding the impact of the texture on the bendability of aluminium sheets
Masinelli, Giulio	ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Mason, Daniel	ID:276-Theoretical Investigation of Fast Low-Temperature Irradiation Creep - Development of a parameter-free digital shadow for quantitative predictions
Masset, Thomas-Xavier	ID:521- Influence of irradiation and deformation on slip transfer in austenitic stainless steels
Mataigne, Jean-Michel	ID:99-Deformation modes and damage mechanisms of a basal-textured ZnAlMg coating under multiaxial loading
Maurel, Agnès	ID:104-Negative refraction in a single-phase flexural metamaterial with hyperbolic dispersion
Maurel, Vincent	ID:99-Deformation modes and damage mechanisms of a basal-textured ZnAlMg coating under multiaxial loading
Mawassy, Nagham	ID:601-Analysis of surface effects based on first and second strain gradient mechanics
Mayeur, Jason	ID:17-Synchronous Involvement of Topology and Microstructure to Design Additively Manufactured Lattice Structure ID:29-A Crystal Plasticity Model to Study Stress Localization and Size-Dependent Tensile Properties of Additively Manufactured Nickle-Base Superalloy: Haynes 214™ at elevated Temperature
Mazière, Matthieu	ID:283-Finite element simulations of jerky flow in nickel-based superalloy IN718
Mazza, Edoardo	ID:67-Stretching the endothelium: characterization and modeling of mechanical damage in young and aged endothelial cells.
McCarthy, Cliona	ID:532-Microscale Mechanical Testing of Lower Limb Vasculature
McCarthy, Cían	ID:363-Toughening of brittle solids via crack front complexity
McCarthy, Edward	ID:46-The stab resistance of SLA printed porous Bouligand structured polymer
McGarry, Patrick	ID:503-A statistical framework for cellular reorientation under cyclic strain
McGarry, Patrick	ID:63-Geometrical and Crystal Plasticity Modelling of Effects of Microstructure on Mechanical Properties of Additively Manufactured 316L Parts
McGraw, Joshua D.	ID:132-Mechanical response of a hydrogel: from small deformations to the dehydration-induced glass transition
McHugh, Peter	ID:63-Geometrical and Crystal Plasticity Modelling of Effects of Microstructure on Mechanical Properties of Additively Manufactured 316L Parts
McMahan, Connor	ID:475-Additively Manufactured Jammable Structured Fabrics for Deployable Structures
McMeeking, Robert	ID:571-Continuum multi-physics modeling of cell and bacteria motility.
Mede, Timon	ID:214-Semi-Analytical Model of Grain Boundary Stresses in Elastic Polycrystals
Meireles, Marcia	ID:493- In-situ thermal monitoring during direct energy deposition: the links between process parameters, thermal cycles and microstructures
Meirelles Santana, Luciano	ID:77-Simulation of size effects in cracked ductile specimens using a GTN nonlocal model
Melo, Francisco	ID:395-Control and instabilities of fracture paths when tearing brittle sheets
Mendiguren, Joseba	ID:595- Optimization of Easy Open Ends for Food Can Packaging: A Comprehensive Material Analysis Approach
Menzel, Andreas	ID:335-Data-driven inelasticity enhanced by neural networks: Opportunities in computational mechanics
Meray, Florian	ID:284-Post-processing of displacement fields from digital image correlation for non-local variables and crack initiation criteria identification in fretting-fatigue
Mercerat, Diego	ID:79-Compressed earth blocks for masonry buildings in seismic zone
Mercier, Sébastien	ID:598- Identification of the corrosion fatigue crack initiation and propagation lives using in-situ electrochemical measurements of the LPBF 316L
Mergheim, Julia	ID:208-Modeling and simulation of pyropiezoelectric energy harvesting ID:341- Influence of the irreversibility strategy in phase-field fracture models
Merheb, Shaymaa	ID:117-Hydrogen-assisted fatigue damage modeling using phase field method
Mertens, Anne	ID:253-Wear behaviour of as-built and heat treated AISI S2 Tool Steel processed by Laser Powder Bed Fusion
Mesarovic, Sinisa	ID:352-Mass transport in nanoparticle sintering stage of additive manufacturing: Macro- and meso-scale computational models.
Mesbah, Daria	ID:193-Identification of crystal plasticity using microstructures digital twins and machine learning
Meulblok, Colin	ID:496-Multiperiodic responses and memory effects in frustrated sheets
Meyer, Knut Andreas	ID:378-Simulation methodology for predicting initiation of surface cracks in railway rails
Michel, Vincent	ID:176-Coupling a continuous wave laser with a scanning electron microscope to achieve characterisation and improvement of additively manufactured materials microstructure
Michels, Alexandre	ID:365-Manufacture of Inserts for High Pressure Aluminum Injection Molds by Additive Manufacturing
Michrafy, Abderrahim	ID:114-Experimental and numerical investigations of structural inhomogeneity of pharmaceutical compacts
Mikhail, Gutkin	ID:226-The Stability of Hollow Multiply Twinned Particles within the Principles of the Irreversible Thermodynamics
Mikhalchan, Anastasiia	ID:358-Mechanics and damage tolerance of nanowire network materials
Milenkovic, Srdjan	ID:298-Pre-contour scans as a new design tool for PBF-LB/M thin-wall structures
Minervino, Matteo	ID:180-Aero-thermo-chemo-mechanical couplings and aging occurring during exposure of polymer materials under high-speed airflow at high temperature.
Miranda, Miguel	ID:585- On the influence of cryogenic temperatures on CFRP laminates subjected to impulsive loadings
Miserez, Ali	ID:71-Harnessing Gradients for Self-Assembly of Peptide-Based Nanocapsules: A Pathway to Advanced Drug Delivery Systems
Mishra, Sushil	ID:513-Yield locus development of TIG Welded AA2219 alloy using cruciform samples ID:494-Cyclic Softening of Ti-6Al-4V subjected to low cycle fatigue: Experiment and Modelling ID:274-Low cycle fatigue of 22MnB5 cold rolled steel: Insights on Microstructure and Crystallographic Bulk Texture ID:561-Cruciform Specimen Design and Optimization for Biaxial Testing of Carbon Fiber Reinforced Polymer Composites ID:273-Ratcheting behaviour of SS316L at room and low temperatures
Mitrovic, Luka	ID:74-Elastic-plastic lattice materials - machine learning based constitutive modeling
Mocci, Alice	ID:587-Computational homogenization and topology optimization of flexoelectricity-based metamaterials for apparent piezoelectricity
Mocerino, Davide	ID:541-Deep-learning-based impact localization in PAEK/CF panels ID:385-Determination of Fracture Parameters in Structural Composites using AI
Mohammadi, Hossein	ID:587-Computational homogenization and topology optimization of flexoelectricity-based metamaterials for apparent piezoelectricity
Mohammadi Amin, Meisam	ID:525-Computational Study of the Effect of Structural Deformation on Osmotic Membrane Mass Transfer
Mohanan, Nikhil	ID:446-Understanding stress-plastic strain evolution of AM 316L steel microstructures due to post process laser scanning: experiment-driven thermomechanical study
Mohanram, Harini	ID:71-Harnessing Gradients for Self-Assembly of Peptide-Based Nanocapsules: A Pathway to Advanced Drug Delivery Systems
Molina, Jon	ID:217-Effect of elastic strains on the catalytic activity of gold thin films for HER and ORR ID:425-Laser powder bed fusion of NiTi alloy parts for cardiovascular applications ID:334-Exploring the evolution of mechanical deformation of intact and degraded SLM WE43 scaffolds: An In Situ X-ray Characterization
Molinos, Miguel	ID:530-Hydrogen storage in Mg nanowires: ADP potentials
Molnar, Gergely	ID:06-The Atomistic Origin of Fracture Toughness in Amorphous Silica ID:53-When phase field met the coupled criterion
Monchetti, Silvia	ID:311-Swelling-related mechanical propeties of hydrogels
Monclova, Jose	ID:178-The Effect of Calcification on the Mechanical Behavior of Clot Analogs for Acute Ischemic Stroke
Monclús, Miguel A.	ID:217-Effect of elastic strains on the catalytic activity of gold thin films for HER and ORR ID:337-X-ray in-situ testing and numerical analysis of SLS manufactured lattice structures
Monnery, Sophie	ID:258-Elasto-granular coupling : how a granular heap deforms a soft substrate
Montanino, Andrea	ID:431-The inclusion of the epithelium in numerical models of the human cornea
Montero-Chacón, Francisco	ID:333-FFT implementation of a microscopic chemo-mechanical model for damage in lithium batteries
Mora, Serge	ID:480-Finite size effect on soft granular materials under compaction
Mora-Macías, Juan	ID:239-Mechanic-Based Therapies in Osteoporosis: A Multimodal approach
Morales-Rivas, Lucia	ID:459-Retained Austenite in Advanced Steels: An experimentally-informed DAMASK Crystal plasticity analysis Thermal history prediction by Machine Learning in Additive Manufacturing
Moran, T	ID:313-Scale Bridging via Peierls-Nabarro Modeling of Dislocations in Complex Alloys
Morand, Lukas	ID:448-Machine Learning for Structure-from-Property Guided Microstructures Optimization and Process Design
Mordehai, Dan	ID:391-Understanding serrated flow in Inconel 718 architected lattices
Moreau, Julien	ID.592-Challenging pressure-free debinding/sintering of Magnesium alloy: application to 3D printed parts by direct-ink writing
Morel, Claire	ID:524-Experimental and numerical investigation of the inter-laminar shear behavior of flax/epoxy composite laminate
Morelle, Xavier	ID:555-Mechanical response of coextruded multi-nanolayered films of PS/LDPE : How mechanical confinment enables to control PS damage mechanisms
Moreno Mateos, Miguel Angel	ID:370-Data-adaptive modeling of hyperelastic constitutive laws: application to extremely soft materials
Moretti, Paolo	ID:247-Controlling damage localization through hierarchical microstructure
Morgaz, Juan	ID:239-Mechanic-Based Therapies in Osteoporosis: A Multimodal approach
Morgeneyer, Thilo	ID:413-Plasticity during ductile tearing : crystallographic and dynamic strain aging effects ID:92-Crystallographic effects on strain heterogeneity and fracture revealed by X-ray lab tomography and crystal plasticity simulations for a 6016 aluminium alloy under plane strain tension
Moriguchi, Shuji	ID:101-Surrogate modeling for computational homogenization of viscoplastic composites
Morin, David Didier	ID:444-Micromechanically-based computational modelling of ductile solids incorporating non-uniform void size distributions ID:377- Testing and Modelling of Welded Aluminium Joints ID:596-Fracture mechanisms in largely strained steels due to self-contacting surface defects: experiments and modelling
Mortensen, Andreas	ID:562-Micromechanical properties of MnO-SiO2-Al2O3 inclusions in iron
Mousavi, Mahmoud	ID:320-Wave propagation in graphene-based functional architectures: Dynamics captured by homogenization
Mouthuy, Pierre-Alexis	ID:126-Experimental characterisation and modelling of electrospun biomedical fibres
Mufti, Shatha J.	ID:573-Examining force-dependent density-reductions and tau mislocalization in dendritic spines with concomitant alterations in network dynamics in TBI-on-a-chip
Mukherjee, Sudipto	ID:322-Shape Optimization of Auxetic Sandwich Panel for Enhanced Underbelly Blast Protection of Armoured Vehicle
Mulvihill, John	ID:532-Microscale Mechanical Testing of Lower Limb Vasculature
Muramatsu, Mayu	ID:244- Inverse Analysis of Defects in CFRP Specimen with Multiple Microscopic Structures by Graph Neural Network Using Stress Distribution of FEM
Murthy, Tejas G	ID:515-DEM study of force transmission in flexible granular chain packings
Murty, Svs Narayan	ID:513-Yield locus development of TIG Welded AA2219 alloy using cruciform samples
Mustafa, Mohib	ID:15-Multi-scale simulation of non-linear cellular- and meta-materials with body-force-enhanced second-order homogenisation ID:325-Multiscale modelling using recurrent neural network for microscale surrogation to achieve acceleration in simulation of rate-dependent dissipative lattice based and cellular (meta) materials ID:337-X-ray in-situ testing and numerical analysis of SLS manufactured lattice structures
Muñoz-Barrutia, Arrate	ID:87-Magneto-mechanical system to evaluate mechanical and functional responses in astrocytes under alternating substrate deformation modes
Myers, Kristin	ID:198-The loading of the fetal brain during the second stage of labour
Myers, Kristin	ID:300-A nonlinear anisotropic viscoelastic model of the macaque rhesus cervix to quantify cervical remodeling
Myhr, Ole Runar	ID:377- Testing and Modelling of Welded Aluminium Joints
Mérot, Jean-Sébastien	ID:179-Experimental characterisation of the hardening mechanisms of an aluminium alloy produced by the L-PBF process
N
Naceri, Salah Eddine	ID:127-Ultra-miniaturised fracture toughness testing of nanostructured tungsten films in the context of nuclear fusion
Naciri, Jawad	ID:204-Pin-ended buckling test on plain and open hole composites to evaluate the strain gradient effect on compressive failure
Nadot-Martin, Carole	ID:599-Fatigue resistance of chemically pre-aged Short Fiber Reinforced Polyamides ID:540-An extended version of the variational EIV approach for the homogenization of composites with generalized Maxwell matrix
Najjar, Denis	ID:242_Stress field estimation for a 316L stainless steel through full-field measurement ID:234-Experimental investigation of early strain localizations of ferrite-pearlite steel with microstructure gradient under cyclic loading.
Nambiyankulam, Shahul Hameed	ID:184-Upscaling transformation plasticity in steel based on full field FFT simulations of polycrystals undergoing phase transformations under applied loads
Namdar, Amir Hossein	ID:279-The effects of network structure on percolation and elastic moduli of fibrous networks
Naouar, Naïm	ID:555-Mechanical response of coextruded multi-nanolayered films of PS/LDPE : How mechanical confinment enables to control PS damage mechanisms
Narasimha Prasad, Nagesh	ID:234-Experimental investigation of early strain localizations of ferrite-pearlite steel with microstructure gradient under cyclic loading.
Navarre, Claire	ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Naya, Fernando	ID:583-The role of fiber breakage in compression after impact of thermoplastic composites: insights from novel experimental techniques.
Nazemzadeh, Nogol	ID:175-Modelling of Recycled Fibre-Reinforced Polymer Composites
Neggers, Jan	ID:379-Multiaxial characterization of 3D printed polymers for patient-specific surgical simulators ID:271-Study of the compressive behavior of polymer cable in a rubber matrix
Nestler, Britta	ID:550-Simulation of Microstructure Evolution by Integrating Crystal Plasticity in the Multiphase-Field Method
Neu, Rudolf	ID:278-Experimental Investigation of Fast Low-Temperature Irradiation Creep – A Novel Experiment for Materials Testing under Extreme Conditions
Neu, Rudolf	ID:276-Theoretical Investigation of Fast Low-Temperature Irradiation Creep - Development of a parameter-free digital shadow for quantitative predictions
Neukirch, Sébastien	ID:136-Capillarity-induced Wrinkling in Fibrous Liquid-Infused Membranes
Nezamabadi, Saeid	ID:557- Influence of microstructure and interlocking on mechanical behavior of agglomerates of hexapod-shaped particles ID:480-Finite size effect on soft granular materials under compaction
Nguyen, Thuy	ID:115-3D printed polymers by photopolymerization: link between resin chemistry, printing parameters and mechanical properties
Nguyen, Van-Dung	ID:164-Exploring thickness effect on fracture toughness of thin metal sheets: a parametric analysis with advanced Gurson model
Nguyen, Van-Dung	ID:185- A reappraisal of the essential work of fracture method based on full three-dimensional advanced Gurson-based finite element simulations
Nicot, François	ID:374-Critical state seen as an emerging property in granular materials
Nieto Valeiras, Eugenia	ID:39-Deformation mechanisms of Ti polycrystals from 3D diffraction contrast tomography and high-resolution digital image correlation data: experiments and simulations ID:215-In situ EBSD/HRDIC-based investigation of twin-twin interaction at grain boundaries in Mg
Nirala, Chandrakant Kumar	ID:297-Experimental and numerical investigation of micro-textured tools fabricated using RµEDM in sustainable machining of Ti6Al4V
Noels, Ludovic	ID:15-Multi-scale simulation of non-linear cellular- and meta-materials with body-force-enhanced second-order homogenisation ID:325-Multiscale modelling using recurrent neural network for microscale surrogation to achieve acceleration in simulation of rate-dependent dissipative lattice based and cellular (meta) materials ID:16-A Self-consistent Reinforced minimal Gated Recurrent Unit for surrogate modelling of elasto-plastic multi-scale problems ID:164-Exploring thickness effect on fracture toughness of thin metal sheets: a parametric analysis with advanced Gurson model
Noels, Ludovic	ID:185- A reappraisal of the essential work of fracture method based on full three-dimensional advanced Gurson-based finite element simulations
Norouzikudiani, Reza	ID:438-Modeling Self-oscillation in Immersed Liquid Crystal Elastomer Beams under Constant Light: A Multi-physics Approach
Nothomb, Nicolas	ID:369-Characterization of High-Strength Aluminum Alloys Lattice Structures produced using Laser Powder Bed Fusion
Nunes, Rafael	ID:209-Improving mechanical properties in Wire Arc Additive Manufacturing of Aluminium Alloys - exploring laser cleaning
Nutal, Nicolas	ID:268-Mechanical characterization of repaired 7xxx aluminum components via Direct Energy Deposition using novel Al-Mg-Zn alloys
Nysten, Bernard	ID:269- Influence of crystallization conditions on local matrix mechanical properties and fracture behavior of carbon fiber-reinforced PEEK composite
O
O'Brien, Fergal J.	ID:25-Biomimetic 3D printed poly (glyceryl sebacate)/collagen composite scaffolds for cartilage defect repair
Oddershede, Jette	ID:92-Crystallographic effects on strain heterogeneity and fracture revealed by X-ray lab tomography and crystal plasticity simulations for a 6016 aluminium alloy under plane strain tension
Oddy, Carolyn	ID:423-Characterising and Modelling the Rate Dependent Mechanical Response of 3D-Fabric Reinforced Composites
Odowd, Noel	ID:586-Deformation behavior Analysis of P91 Martensitic Steel: Micropillar Tests and Crystal Plasticity Modelling
Oggero, Michel	ID:79-Compressed earth blocks for masonry buildings in seismic zone
Okafor, Chukwudalu	ID:398-Doping-regulated room-temperature dislocation plasticity in SrTiO3: a nanoindentation approach
Oldroyd, Jeremy	ID:203-Mechanics in Forensic Science: predicting Traumatic Brain Injury via mechanics enhanced machine learning
Olejnak, Juraj	ID:236-Cubic symmetry preservation and homogeneity in elastic properties of β+ω and β+α Ti-alloys. An ultrasound-based study
Oliveira Santos, Tiago M.	ID:365-Manufacture of Inserts for High Pressure Aluminum Injection Molds by Additive Manufacturing
Olivier, Philippe	ID:528-Experimental study of micro-vascular networks embedded in carbon composites for High Energy Physics applications submitted to internal pressure
Olsson, Christoffer	ID:376- In-vivo estimation of white matter tract-related deformation under mild head impacts
Olsson, Pär	ID:360-Evaluation of elasticity in binary ordered systems by phase-field crystal simulations
Orbell, John	ID:130-Influence of processing defects on the mechanical performance of additively manufactured titanium cellular materials
Orekhov, Andrey	ID:292-Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films ID:141-Room temperature electron beam sensitive viscoplastic response of ultra-ductile Al/a-Al2O3 model system
Orekhov, Andrey	ID:191-Nanoindentation of strong and ductile Al2O3/Al hybrid nanolaminates
Orozco Caballero, Alberto	ID:39-Deformation mechanisms of Ti polycrystals from 3D diffraction contrast tomography and high-resolution digital image correlation data: experiments and simulations ID:215-In situ EBSD/HRDIC-based investigation of twin-twin interaction at grain boundaries in Mg
Ortiz, Michael	ID:559-Rigorous generalized elasticity models for mechanical metamaterials ID:530-Hydrogen storage in Mg nanowires: ADP potentials ID:505-Data-driven games for computational multiscale mechanics of materials
Ortiz, Michael	ID:275-The energy-stepping Monte Carlo method: a highly efficient sampling algorithm for data-driven and statistical mechanics
Ortiz, Roland	ID:129-Particular risk assessment and subsequent shielding: Numerical validation of promising concepts
Osipov, Nikolay	ID:77-Simulation of size effects in cracked ductile specimens using a GTN nonlocal model
Otegi, Nagore	ID:595- Optimization of Easy Open Ends for Food Can Packaging: A Comprehensive Material Analysis Approach
Oterkus, Erkan	ID:42-Recent Advances in Peridynamics
Oterkus, Selda	ID:42-Recent Advances in Peridynamics
Oulahna, Driss	ID:114-Experimental and numerical investigations of structural inhomogeneity of pharmaceutical compacts
Ovalle, Cristian	ID:62-Internally-pressurized plastic pipes mimicked by plane strain grooved tensile (PSGT) specimens ID:233-Mechanisms of deformation and voiding using tomography on neat and glass syntactic polypropylene : Finite Element simulations on flat notched specimens
Ozanam, François	ID:294-Effect of Stress and Viscoplastic Behavior on the Electrochemical Response of Amorphous Silicon Electrodes
P
Pac, Marie-José	ID:350-Residual stress level of fiber-reinforced composite laminates : influence of manufacturing conditions ID:349-A finite element model of TiAl/TiAlN nano-multilayered coatings
Padhee, Srikant Sekhar	ID:05-An Efficient and Accurate Asymptotically Correct Equivalent Single Layer Plate Theory (ACESLT) with Variational Asymptotic Approach for Energy-based Analysis
Pagani, Gabriele	ID:577-No Yield Stress for Yield-Stress Fluids
Palevicius, Arvydas	ID:574- Investigation of Dynamic Mechanical Properties of PP Thermoplastic
Pan, Zhouzhou	ID:346-A discrete-continuum model for hydrolytic degradation in polymers
Panat, Rahul	ID:352-Mass transport in nanoparticle sintering stage of additive manufacturing: Macro- and meso-scale computational models.
Pandey, Anshul	ID:200-Localizing gradient damage model integrated with smoothed finite element method for simulating quasi-brittle fracture
Pandiyan, Vigneashwara	ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Pandolfi, Anna	ID:431-The inclusion of the epithelium in numerical models of the human cornea
Panteri, Filippo	ID:423-Characterising and Modelling the Rate Dependent Mechanical Response of 3D-Fabric Reinforced Composites
Papangelo, Antonio	ID:495-Tuning the adhesion properties of soft viscoelastic interfaces by dynamic excitation
Pardoen, Thomas	ID:401-Strain engineering of thin semiconductor films investigated using the residual-stress-actuated on-chip testing method ID:292-Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films ID:458-Crystal plasticity modeling of nanoindentation in ITER-relevant W/Cu joints ID:141-Room temperature electron beam sensitive viscoplastic response of ultra-ductile Al/a-Al2O3 model system ID:269- Influence of crystallization conditions on local matrix mechanical properties and fracture behavior of carbon fiber-reinforced PEEK composite ID:127-Ultra-miniaturised fracture toughness testing of nanostructured tungsten films in the context of nuclear fusion ID:191-Nanoindentation of strong and ductile Al2O3/Al hybrid nanolaminates ID:185- A reappraisal of the essential work of fracture method based on full three-dimensional advanced Gurson-based finite element simulations ID:192-On the characterization of the plane stress fracture toughness of high-entropy alloys at room and cryogenic temperatures ID:164-Exploring thickness effect on fracture toughness of thin metal sheets: a parametric analysis with advanced Gurson model ID:306-Alternating ductile and brittle cracking mode in medium manganese steel sheets ID:357-Combining nano-DIC and ACOM TEM to study the ductility enhancement of aluminium films by grain boundary sliding
Paroni, Roberto	ID:111-Competition between epithelial tissue elasticity and surface tension in cancer morphogenesis
Pathak, Anup Kumar	ID:05-An Efficient and Accurate Asymptotically Correct Equivalent Single Layer Plate Theory (ACESLT) with Variational Asymptotic Approach for Energy-based Analysis
Pathak, Parag	ID:421- Instability analysis of layered magnetoactive elastomers
Patil, Praveenkumar	ID:46-The stab resistance of SLA printed porous Bouligand structured polymer
Pedrosa Valbuena, Adrian	ID:280-Development of a simulation model of the thermoforming process of polymer matrix composite materials and definition of a Forming Limit Curve to identify defects and optimize their manufacture
Peerlings, Ron	ID:572-Unraveling martensite micro-mechanics, by nano- to macro-scale in-situ testing & CP modelling
Pelliciari, Matteo	ID:309-Understanding Graphene Mechanics: From Molecular to Continuum Modeling
Pelliciari, Matteo	ID:367-A strain energy function for large volumetric deformations of elastomers
Pena, Jose-Maria	ID:203-Mechanics in Forensic Science: predicting Traumatic Brain Injury via mechanics enhanced machine learning ID:106-Fluid-structure interaction model for hydrocephalus shunt systems
Pendashteh, Afshin	ID:217-Effect of elastic strains on the catalytic activity of gold thin films for HER and ORR
Peng, Xiang-Long	ID:33-Data-driven inverse design of bimaterial strut-based lattice structures
Pensis, Olivier	ID:149-Formulation of mean-field model for the accurate prediction of creep deformation of alloy 800H under very-high temperature and low-stress loadings
Perea, Gertrudis	ID:87-Magneto-mechanical system to evaluate mechanical and functional responses in astrocytes under alternating substrate deformation modes
Perez, Michel	ID:593- Aluminium alloys for Additive Friction Stir Deposition manufacturing
Perez R., Leonardo A.	ID:107-Mechanical metamaterials: frequency-independent enriched continua from frequency-dependent models ID:207-Finite-size metamaterials and non-coherent reduced relaxed micromorphic interfaces
Perez Torices, Rubén	ID:280-Development of a simulation model of the thermoforming process of polymer matrix composite materials and definition of a Forming Limit Curve to identify defects and optimize their manufacture
Perez-Gallego, Daniel	ID:384-Micro-scale Characterisation of Residual Stresses Generated during Face Turning using Focused Ion Beam Milling and Digital Image Correlation
Perez-Martin, Maria Jesus	ID:596-Fracture mechanisms in largely strained steels due to self-contacting surface defects: experiments and modelling
Perlade, Astrid	ID:306-Alternating ductile and brittle cracking mode in medium manganese steel sheets
Pernas-Sanchez, Jesús	ID:585- On the influence of cryogenic temperatures on CFRP laminates subjected to impulsive loadings ID:387-Experimental study of polymer-based 3D auxetic structures manufactured by SLA. ID:583-The role of fiber breakage in compression after impact of thermoplastic composites: insights from novel experimental techniques. ID:584-Strain rate influence on the compressive behaviour of holed woven CFRP laminates
Perosanz, Sergio	ID:118-On the connection between cellular design, defects, and fatigue performance in additively manufactured metamaterials
Pettermann, Heinz E.	ID:74-Elastic-plastic lattice materials - machine learning based constitutive modeling
Peña, Estefania	ID:565- In-Silico Modeling of Atherosclerosis: Continuous and Agent-Based Hybrid Approach
Pfaller, Sebastian	ID:415- Identification of inelastic interphase properties in polymer nanocomposites based on molecular dynamics ID:441-Atomistic-to-continuum coupled simulations for fracture of glassy polymers with non-uniform deformations
Pfeiffer, Stefan	ID:547-Operando tomographic microscopy during laser-based powder bed fusion.
Pham, Kim	ID:104-Negative refraction in a single-phase flexural metamaterial with hyperbolic dispersion
Piao, Yinguang	ID:554-On The Role of Plastic Relaxation in Stress Assisted Grain Boundary Oxidation
Picu, Catalin	ID:578-Effect of Fiber-Fiber Adhesion on the Mechanics of Network Materials
Pillitteri, Salvatore	ID:223-Valorization of titanium Ti-6Al-4V scrap into high added value powders for manufacturing technologies
Pinnola, Francesco Paolo	ID:579-Higher-order nanobeams based on stress-driven integral elasticity
Pinzon, Gustavo	ID:110-Stereo X Ray tomography for high temporal resolution experiments
Pioletti, Dominique	ID:18-Thermomechanobiology: a new concpet for cartilage mechanics
Piras, Maxime	ID:462-Microstructure - defect competition in high cycle fatigue of a duplex stainless steel obtained by laser powder bed fusion
Pirmoradi, Pouriya	ID:30-Anisotropic elastic strain-gradient continuum from the macro-scale to the granular micro-scale
Pissas, George	ID:436-Phase Field Fracture in 3D Printed Fibre Reinforced Composites Using Virtual Elements
Pitoiset, Xavier	ID:221-Development of repair of large stainless steel parts by direct metal deposition for the energy sector
Planas, Jaime	ID:590-Simulation of indirect tensile tests of cylindric specimens and extension of the size-effect curves of concrete
Pommier, Sylvie	ID:303-Quantifying stress intensity factors in fretting tests via digital image correlation
Pommier, Sylvie	ID:284-Post-processing of displacement fields from digital image correlation for non-local variables and crack initiation criteria identification in fretting-fatigue
Poncelet, Olivier	ID:307-Thermal management from the build platform for laser powder bed fusion of Fe-Si alloys
Poorsolhjouy, Payam	ID:30-Anisotropic elastic strain-gradient continuum from the macro-scale to the granular micro-scale
Portela, Carlos	ID:453-Curvature-guided design of shell-based spinodal metamaterials ID:500-Role of topology on the dynamic response of spinodal meta-materials
Portemont, Gérald	ID:140-The contribution of infrared thermography to impact testing at low and high velocities ID:129-Particular risk assessment and subsequent shielding: Numerical validation of promising concepts
Possart, Gunnar	ID:415- Identification of inelastic interphase properties in polymer nanocomposites based on molecular dynamics
Potapov, Serguei	ID:405-Development of a polyhedral DEM method for simulating the relocation of nuclear fuel during a LOCA.
Prabhu, Nikhil	ID:545-Determination of Crystal Plasticity Parameters from In-Situ Synchrotron Diffraction
Prahs, Andreas	ID:550-Simulation of Microstructure Evolution by Integrating Crystal Plasticity in the Multiphase-Field Method
Priddy, Matthew	ID:452-An examination of distortion and residual stresses in thermo-mechanical FE simulations of AM components via the EMMI ISV model
Prima, Frederic	ID:508-Development of new lean titanium alloys presenting increased work-hardening and defect tolerance through Reorientation Induced Plasticity
Protière, Suzie	ID:258-Elasto-granular coupling : how a granular heap deforms a soft substrate
Protière, Suzie	ID:32-Yin-Yang spiraling transition of a confined buckled elastic sheet
Proudhon, Henry	ID:257-Characterization of the deformed state before the onset of recrystallization in pure aluminium by in situ SEM tensile tests and CPFEM simulations ID:193-Identification of crystal plasticity using microstructures digital twins and machine learning ID:92-Crystallographic effects on strain heterogeneity and fracture revealed by X-ray lab tomography and crystal plasticity simulations for a 6016 aluminium alloy under plane strain tension
Pundir, Mohit	ID:316-Unraveling the Dynamics of Supershear Mode I Crack Growth
Pupure, Liva	ID:529-Micro-mechanical study of residual stresses and strength of induction-cured thermoset composites
Pupurs, Andrejs	ID:529-Micro-mechanical study of residual stresses and strength of induction-cured thermoset composites
Purohit, Prashant	ID:543-Defining Fracture Toughness for Hydrogels
Puybras, Maureen	ID:593- Aluminium alloys for Additive Friction Stir Deposition manufacturing
Pyka, Grzegorz	ID:369-Characterization of High-Strength Aluminum Alloys Lattice Structures produced using Laser Powder Bed Fusion
Pérez, Daniel	ID:217-Effect of elastic strains on the catalytic activity of gold thin films for HER and ORR
Pérez, Michel	ID.592-Challenging pressure-free debinding/sintering of Magnesium alloy: application to 3D printed parts by direct-ink writing
Pérez García, Carlos	ID:235-Dynamic Actuation Modes in Magneto-Responsive Bistable Structures: A Rate-Dependent Approach
Pérez Prado, Maria Teresa	ID:388- Influence of Lattice Architecture Mixing Strategy for Improved Mechanical Properties in Additively Manufactured Inconel718 Lattices ID:298-Pre-contour scans as a new design tool for PBF-LB/M thin-wall structures ID:391-Understanding serrated flow in Inconel 718 architected lattices ID:389-Relating laser powder bed fusion process parameters to (micro)structure and to soft magnetic behaviour in a Fe-based bulk metallic glass ID:556- Influence of Thickness on the (Micro)structure and the Magnetic behavior of Kuamet6B2 Thin Walls
Q
Qi, Huitang	ID:71-Harnessing Gradients for Self-Assembly of Peptide-Based Nanocapsules: A Pathway to Advanced Drug Delivery Systems
Qi, Jiashuo	ID:119-Multiphysics and Multiscale Simulation of Cold Spray Additive Manufacturing
Qian, Xudong	ID:353-A Contactless Approach to Quantify Fracture Resistance and Crack Size in Thick Metallic Specimens
Qian, Xuliang	ID:304-New Mechanics in Cell-Nanomaterial Interactions: Boron Nitride Nanosheets Inducing Water Channels Across Lipid Bilayers ID:71-Harnessing Gradients for Self-Assembly of Peptide-Based Nanocapsules: A Pathway to Advanced Drug Delivery Systems
R
Rabaud, Marc	ID:344-Plastic chip formation in Swiss cheese the "tête de moine"
Rabenda, Martyna	ID:232-Static and Dynamic Analysis of Bidirectionally Sinusoidal Corrugated Steel Shells: A Comparative FEA Study
Rabkin, Eugen	ID:564- In situ three-dimensional observation of plasticity onset in a Pt nanoparticle
Rachik, Mohamed	ID:75-Heterogeneities in solid-state MLFS additively manufactured 7075 aluminium alloy ID:119-Multiphysics and Multiscale Simulation of Cold Spray Additive Manufacturing ID:49-Influence of the mineral wool microstrucure on its dynamic macroscopic behaviour
Radisson, Basile	ID:73-Coalescence of slender structures removed from a liquid bath
Radjai, Farhang	ID:557- Influence of microstructure and interlocking on mechanical behavior of agglomerates of hexapod-shaped particles ID:595-Macro-elasticity of granular materials composed of polyhedral particles ID:566-A new numerical model for the elasto-plastic behavior of cellular materials ID:490- On the triaxial compression of dense cohesive granular materials
Radouane, Akrache	ID:199-Prediction of admissible residual stress using fatigue criteria
Rahbarniazi, Masoud	ID:70-Solute effects on softening/strengthening of prismatic slip in Mg
Rai, Mayank	ID:322-Shape Optimization of Auxetic Sandwich Panel for Enhanced Underbelly Blast Protection of Armoured Vehicle
Rakotozafy, Harena	ID:508-Development of new lean titanium alloys presenting increased work-hardening and defect tolerance through Reorientation Induced Plasticity
Rallu, Antoine	ID:383-Dynamics of a multi-supported beam: homogenized models and relevant boundary conditions
Ramachandramoorthy, Rajaprakash	ID:317-Compression of dewetted nickel microparticles at ultra-high strain rates
Ramond, Laure	ID:429-Agglomerate crack propagation under micro-compression as seen by phase-contrast tomography
Ramos, Camilo	ID:590-Simulation of indirect tensile tests of cylindric specimens and extension of the size-effect curves of concrete
Ranjan, Anish	ID:494-Cyclic Softening of Ti-6Al-4V subjected to low cycle fatigue: Experiment and Modelling
Raoelison, Rija Nirina	ID:119-Multiphysics and Multiscale Simulation of Cold Spray Additive Manufacturing
Raphaël, Elie	ID:132-Mechanical response of a hydrogel: from small deformations to the dehydration-induced glass transition
Raschetti, Marina	ID:237-An imaging technique for the strain-engineering of deformable electrodes
Raskin, Jean-Pierre	ID:401-Strain engineering of thin semiconductor films investigated using the residual-stress-actuated on-chip testing method ID:292-Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films ID:141-Room temperature electron beam sensitive viscoplastic response of ultra-ductile Al/a-Al2O3 model system ID:357-Combining nano-DIC and ACOM TEM to study the ductility enhancement of aluminium films by grain boundary sliding
Ratsifandrihana, Léon	ID:204-Pin-ended buckling test on plain and open hole composites to evaluate the strain gradient effect on compressive failure
Rauter, Natalie	ID:552-A computational modelling approach of viscoelasticity based on random fields for short fibre-reinforced composites with experimental verification
Raynaud, Stephane	ID:155-Numerical simulation of additive manufacturing based on fused deposition modeling: Application to the prediction of geometric deviations and mechanical performances of 3D printed prosthetic devices
Rayz, Vitaliy	ID:573-Examining force-dependent density-reductions and tau mislocalization in dendritic spines with concomitant alterations in network dynamics in TBI-on-a-chip
Reali, Luca	ID:276-Theoretical Investigation of Fast Low-Temperature Irradiation Creep - Development of a parameter-free digital shadow for quantitative predictions ID:201-Multi-scale modelling of irradiated metallic materials for fusion reactors
Recrosi, Filippo	ID:111-Competition between epithelial tissue elasticity and surface tension in cancer morphogenesis
Reda, Hilal	ID:601-Analysis of surface effects based on first and second strain gradient mechanics
Redondo, Jorge	ID:217-Effect of elastic strains on the catalytic activity of gold thin films for HER and ORR
Reese, Stefanie	ID:437-Neural Operator-Driven Analysis of Heterogeneous Microstructures: Mechanical and Thermal Behaviors
Reina-Romo, Esther	ID:548-Advanced inverse formulations for 3DTFM: regularized and non-regularized strategies for traction reconstruction ID:239-Mechanic-Based Therapies in Osteoporosis: A Multimodal approach
Reis, Pedro M.	ID:238-Waltzing with Instabilities to Morph Rotating Structures
Remacle, Jean-François	ID:369-Characterization of High-Strength Aluminum Alloys Lattice Structures produced using Laser Powder Bed Fusion
Remmers, Joris J.C.	ID:327-Mesoscale modelling of complex textile-reinforced composite materials using the finite cell method
Renart Canalias, Jordi	ID:174-Constructing a database of Fully-Uncoupled Multi-Directional (FUMD) specimens for delamination testing
Renollet, Yves	ID:257-Characterization of the deformed state before the onset of recrystallization in pure aluminium by in situ SEM tensile tests and CPFEM simulations
Renollet, Yves	ID:261-Experimental study and modeling of bending behavior in temperature of a SMAT-treated Ni-based superalloy
Renouf, Mathieu	ID:158-Elongated Grains in Silos: A 3D Odyssey through Non-linear Flow Variations
Repcek, Kristyna	ID:236-Cubic symmetry preservation and homogeneity in elastic properties of β+ω and β+α Ti-alloys. An ultrasound-based study
Retraint, Delphine	ID:261-Experimental study and modeling of bending behavior in temperature of a SMAT-treated Ni-based superalloy
Revil-Baudard, Benoit	ID:19-Time effects on the plastic deformation of single crystals
Reynier, Yvan	ID:490- On the triaxial compression of dense cohesive granular materials
Reyssat, Etienne	ID:264- The Y-rod test ID:394-Pneumatic surface morphing plates fabricated through a direct ink writing ID:259-Harnessing stiffness asymmetry in thin sheets inflatables for high deformation shape morphing ID:55-Deploying Complex shapes using Kirigami
Rezaee-Hajidehi, Mohsen	ID:386-Phase-field modeling of deformation twinning and its interaction with plastic slip during nano-indentation ID:537-Twin branching in shape memory alloys: a 1D continuum model accounting for the energy dissipation effects
Rezaei, Shahed	ID:277-Chemo-mechanical Damage Modeling of the Impact of Microstructure on Performance and Cracking in Polycrystalline Lithium-ion Battery Cathode Active Material ID:437-Neural Operator-Driven Analysis of Heterogeneous Microstructures: Mechanical and Thermal Behaviors
Rezazadeh, Vahid	ID:336-An uncoupled two-scale finite element model to investigate air entrapment during PET polymer thin film lamination
Richard, Fabrice	ID:349-A finite element model of TiAl/TiAlN nano-multilayered coatings
Richard, Marie-Ingrid	ID:564- In situ three-dimensional observation of plasticity onset in a Pt nanoparticle
Richefeu, Vincent	ID:595-Macro-elasticity of granular materials composed of polyhedral particles ID:566-A new numerical model for the elasto-plastic behavior of cellular materials
Ries, Maximilian	ID:415- Identification of inelastic interphase properties in polymer nanocomposites based on molecular dynamics
Riesch, Johann	ID:276-Theoretical Investigation of Fast Low-Temperature Irradiation Creep - Development of a parameter-free digital shadow for quantitative predictions ID:278-Experimental Investigation of Fast Low-Temperature Irradiation Creep – A Novel Experiment for Materials Testing under Extreme Conditions
Ritchie, Sandra	ID:352-Mass transport in nanoparticle sintering stage of additive manufacturing: Macro- and meso-scale computational models.
Rivero Pérez, Isidre	ID:90-Development of adaptative printing parameters for enhanced productivity of L-PBF printed AlSi10Mg
Rizk, Georgio	ID:07-Study of the thermal mechanical coupling effect of a lattice core glass fiber epoxy composite sandwich
Rizzi, Gianluca	ID:107-Mechanical metamaterials: frequency-independent enriched continua from frequency-dependent models ID:207-Finite-size metamaterials and non-coherent reduced relaxed micromorphic interfaces
Robert, Gilles	ID:599-Fatigue resistance of chemically pre-aged Short Fiber Reinforced Polyamides
Rodella, Andrea	ID:252-Emerging anisotropy and tethering with memory effects in fibrous materials
Rodopoulos, Dimitrios	ID:375-Thermo-mechanical attributes and strain gradient field of materials with uniform and graded inner architectures
Rodrigo, C.	ID:417-Mechanochemical inhibition of growth in avascular tumours
Rodriguez Barber, Ignacio	ID:298-Pre-contour scans as a new design tool for PBF-LB/M thin-wall structures
Rodriguez-Sereno, Jose Manuel	ID:584-Strain rate influence on the compressive behaviour of holed woven CFRP laminates
Rodríguez Páez, Jorge	ID:396-Modelling the elastic-viscoplastic behaviour during presureless sintering of 17/4PH steel parts obtained by Binder Jetting
Rodríguez Sánchez, Marcos	ID:389-Relating laser powder bed fusion process parameters to (micro)structure and to soft magnetic behaviour in a Fe-based bulk metallic glass ID:556- Influence of Thickness on the (Micro)structure and the Magnetic behavior of Kuamet6B2 Thin Walls
Rogers, Edmond A.	ID:573-Examining force-dependent density-reductions and tau mislocalization in dendritic spines with concomitant alterations in network dynamics in TBI-on-a-chip
Rohart, Philippe	ID:117-Hydrogen-assisted fatigue damage modeling using phase field method
Rohracker, Maurice	ID:341- Influence of the irreversibility strategy in phase-field fracture models
Roisin, Nicolas	ID:401-Strain engineering of thin semiconductor films investigated using the residual-stress-actuated on-chip testing method
Rojas-Ulloa, Carlos	ID:149-Formulation of mean-field model for the accurate prediction of creep deformation of alloy 800H under very-high temperature and low-stress loadings
Roman, Benoît	ID:344-Plastic chip formation in Swiss cheese the "tête de moine" ID:264- The Y-rod test ID:395-Control and instabilities of fracture paths when tearing brittle sheets ID:394-Pneumatic surface morphing plates fabricated through a direct ink writing ID:259-Harnessing stiffness asymmetry in thin sheets inflatables for high deformation shape morphing ID:55-Deploying Complex shapes using Kirigami
Romero, Ignacio	ID:275-The energy-stepping Monte Carlo method: a highly efficient sampling algorithm for data-driven and statistical mechanics
Romero, Ignacio	ID:339-An Incompatible Finite Element formulation for enhanced representation of solutions in Phase-Field problems: Application to Regularized Fracture ID:392-Effect of fibre rotation on the coupling between matrix cracking and delamination.
Roque, Eduardo	ID:333-FFT implementation of a microscopic chemo-mechanical model for damage in lithium batteries
Rosado-Mendez, Ivan	ID:300-A nonlinear anisotropic viscoelastic model of the macaque rhesus cervix to quantify cervical remodeling
Rose, Tonya	ID:248-Influence of yield surface on stress redistribution and strain localization in a flat notched sample for turbine disk application
Rosendahl, Philipp	ID:56-Predicting the intrinsic tensile strength of etched glass using the coupled criterion
Rosso, Michel	ID:294-Effect of Stress and Viscoplastic Behavior on the Electrochemical Response of Amorphous Silicon Electrodes
Roth, Stephan	ID:450-Geometric and Constitutive Modeling of MgO-C Refractories Based on Recyclates for Thermo-Mechanical Simulations: Influence of Graphite Flakes
Roth, Stephan	ID:516- A multi-field mixed incremental variational framework for phase-field modeling of hydrogen-promoted fracture
Rousselot, Christophe	ID:237-An imaging technique for the strain-engineering of deformable electrodes ID:349-A finite element model of TiAl/TiAlN nano-multilayered coatings
Roux, Jean-Noël	ID:72-Microstructure characterization of unsaturated wet granular materials using x-ray microtomography
Royo, Juan	ID:585- On the influence of cryogenic temperatures on CFRP laminates subjected to impulsive loadings
Ruan, Qichao	ID:157-A Discontinuous Galerkin Finite Element Scheme for A Dislocation Density Transport Based Crystal Plasticity Formulation
Rubin, M.B.	ID:296-Size-dependent large-deformation elastoplasticity relying on Eulerian rates of elastic incompatibilities
Rudykh, Stephan	ID:414-Viscoelastic Properties of Magnetorheological Elastomers for Multilayered Semi-Active Damper Applications
Rudykh, Stephan	ID:527-Magnetoactive elastomers: micromechanics and instability-driven microstructure transformations for tunable functions. ID:421- Instability analysis of layered magnetoactive elastomers ID:457-Rate-dependent instabilities in soft visco-hyperelastic composites ID:66-Hard-Magnetic Soft Metamaterials for Remote Tunability of Elastic Waves ID:428-Elastic Instability in Soft Particulate Composites with Stiffening Behavior
Ruestes, Carlos	ID:254-A Discrete Slip Plane Approach to Simulate the Deformation of Tungsten Nanostructures
Ruffini, Antoine	ID:109-Phase-field modelling of interactions between extended defects in metals placed under extreme conditions ID:449-A nonlinear variational model of cracks and dislocations ID:288-A quantitative phase-field study of hydrogen embrittlement in metals
Ruget, Simon	ID:314-Coarse approximation of heterogeneous elasticity problems
Ruggieri, Matteo	ID:414-Viscoelastic Properties of Magnetorheological Elastomers for Multilayered Semi-Active Damper Applications
Ruhland, Laura	ID:83-Viscoelastic characterization of ultrasoft material by unifying different time and length scales
Ruiz, Raul	ID:458-Crystal plasticity modeling of nanoindentation in ITER-relevant W/Cu joints
Ruiz-Hervías, Jesús	ID:217-Effect of elastic strains on the catalytic activity of gold thin films for HER and ORR
Ruiz-Hervías, Jesús	ID:384-Micro-scale Characterisation of Residual Stresses Generated during Face Turning using Focused Ion Beam Milling and Digital Image Correlation
Ruiz-Mateos Brea, Raquel	ID:548-Advanced inverse formulations for 3DTFM: regularized and non-regularized strategies for traction reconstruction
Rusinowicz, Morgan	ID:127-Ultra-miniaturised fracture toughness testing of nanostructured tungsten films in the context of nuclear fusion ID:191-Nanoindentation of strong and ductile Al2O3/Al hybrid nanolaminates
Rutar, Romain	ID:451-Numerical simulation and R-curves computation of CFRP Compact Tension tests using the Discrete Ply Model
Ryckelynck, David	ID:193-Identification of crystal plasticity using microstructures digital twins and machine learning
S
Sabery, Shahram	ID:171-Design and control of shape-changing elastic robotic structures
Sabirov, Ilchat	ID:289-Advanced characterization of Additively Manufactured Functionally Grade Materials (FGMs) coupled with Thermodynamic Simulations.
Sacchelli, Carlos	ID:365-Manufacture of Inserts for High Pressure Aluminum Injection Molds by Additive Manufacturing
Sadanand, Saumya	ID:389-Relating laser powder bed fusion process parameters to (micro)structure and to soft magnetic behaviour in a Fe-based bulk metallic glass ID:556- Influence of Thickness on the (Micro)structure and the Magnetic behavior of Kuamet6B2 Thin Walls
Sadik, Souhayl	ID:509-Surrogate modelling of springback in thermoformed foam cores
Sadok, Wiktoria	ID:230-Experimental measurements of forced vibrations of bionic-inspired ceiling tiles
Sadowski, Przemysław	ID:386-Phase-field modeling of deformation twinning and its interaction with plastic slip during nano-indentation
Saggionetto, Enrico	ID:253-Wear behaviour of as-built and heat treated AISI S2 Tool Steel processed by Laser Powder Bed Fusion
Sahoo, Souvik	ID:388- Influence of Lattice Architecture Mixing Strategy for Improved Mechanical Properties in Additively Manufactured Inconel718 Lattices
Sahoo, Souvik	ID:391-Understanding serrated flow in Inconel 718 architected lattices
Saiani, Alberto	ID:279-The effects of network structure on percolation and elastic moduli of fibrous networks
Saintier, Nicolas	ID:598- Identification of the corrosion fatigue crack initiation and propagation lives using in-situ electrochemical measurements of the LPBF 316L
Saletti, Dominique	ID:323-Understanding the impact of the texture on the bendability of aluminium sheets
Salez, Thomas	ID:132-Mechanical response of a hydrogel: from small deformations to the dehydration-induced glass transition
Salvadori, Alberto	ID:571-Continuum multi-physics modeling of cell and bacteria motility.
Salvi, Laura	ID:406-Quantification of internal damage during tensile straining of LPBF-manufactured cellular materials with random voids
Samorì, Paolo	ID:304-New Mechanics in Cell-Nanomaterial Interactions: Boron Nitride Nanosheets Inducing Water Channels Across Lipid Bilayers
Sanchez Naharro, Pablo	ID:106-Fluid-structure interaction model for hydrocephalus shunt systems
Sancho Cadenas, Rafael	ID:124-Multiscale analysis of the dynamic behavior of additively manufactured Ti6Al4V architected metamaterials
Sandfeld, Stefan	ID:448-Machine Learning for Structure-from-Property Guided Microstructures Optimization and Process Design
Santiago-Calvo, Mercedes	ID:282-The influence of matrix and fibers on the mechanical response of recycled fiber-reinforced polymer composites from aeronautic sector
Santisi D Avila, Maria Paola	ID:79-Compressed earth blocks for masonry buildings in seismic zone
Santos Macías, J.G.	ID:151-Icosahedral short-range order mediated twin formation in laser direct energy deposited 316L stainless steel with silicon ID:176-Coupling a continuous wave laser with a scanning electron microscope to achieve characterisation and improvement of additively manufactured materials microstructure ID:446-Understanding stress-plastic strain evolution of AM 316L steel microstructures due to post process laser scanning: experiment-driven thermomechanical study
Santos-Güemes, Rodrigo	ID:455-Adaptive grids for FFT based field dislocation mechanics
Sanz, Beatriz	ID:590-Simulation of indirect tensile tests of cylindric specimens and extension of the size-effect curves of concrete
Sanz-Herrera, José Antonio	ID:548-Advanced inverse formulations for 3DTFM: regularized and non-regularized strategies for traction reconstruction
Sapanathan, Thaneshan	ID:75-Heterogeneities in solid-state MLFS additively manufactured 7075 aluminium alloy
Saraf, Gaurav	ID:297-Experimental and numerical investigation of micro-textured tools fabricated using RµEDM in sustainable machining of Ti6Al4V
Sarebanzadeh, Maral	ID:39-Deformation mechanisms of Ti polycrystals from 3D diffraction contrast tomography and high-resolution digital image correlation data: experiments and simulations ID:215-In situ EBSD/HRDIC-based investigation of twin-twin interaction at grain boundaries in Mg
Saseendran, Sibin	ID:423-Characterising and Modelling the Rate Dependent Mechanical Response of 3D-Fabric Reinforced Composites
Sauer, Christiane	ID:196-Multiscale geometric design of friction-based interleaved membranes
Savina, Esther	ID:348-Ageing of a PBSAT fishing net: a multiscale study
Sayyadishahraki, Ahmad	ID:398-Doping-regulated room-temperature dislocation plasticity in SrTiO3: a nanoindentation approach
Schasching, Marius	ID:173-Simulations of the postbuckling response of lattice beams using micropolar continuum theory
Scheibert, Julien	ID:520-Fast cracks in amorphous polymers: unraveling the interplay between near-tip microcracking dynamics and macroscale fracture mechanics
Scheibert, Julien	ID:549-Metainterfaces: how to design a soft contact that obeys a specified friction law?
Scherer, Jean-Michel	ID:502-Size effects in the plasticity-assisted fracture of brittle polycristals
Schiffer, Andreas	ID:122-Collapse of hierarchical honeycombs with sandwich-structured cell walls
Schirmer, Richard Wolfgang	ID:219- Characterization of the creep behavior of the nickel-based superalloy 2.4842 utilizing miniature testing techniques and numerical investigations
Schittecatte, Laura	ID:115-3D printed polymers by photopolymerization: link between resin chemistry, printing parameters and mechanical properties
Schlenger, Lucas	ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing
Schlepütz, Christian	ID:547-Operando tomographic microscopy during laser-based powder bed fusion.
Schmandt, Louis	ID:182-A fuzzy inference model for prediction of delay risk associated with low rail-wheel adhesion
Schneider, Daniel	ID:550-Simulation of Microstructure Evolution by Integrating Crystal Plasticity in the Multiphase-Field Method
Schneider, Maxie	ID:196-Multiscale geometric design of friction-based interleaved membranes
Schryvers, Dominique	ID:292-Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films ID:141-Room temperature electron beam sensitive viscoplastic response of ultra-ductile Al/a-Al2O3 model system ID:319-Stress-induced amorphization and grain boundary sliding in olivine
Schula, Sebastian	ID:56-Predicting the intrinsic tensile strength of etched glass using the coupled criterion
Schwaiger, Ruth	ID:399-High temperature nanoindentation of different metals: evaluating thermal drift, frame stiffness and composition effects on the mechanical properties ID:400-Mechanical behavior of grain boundaries containing precipitates in a refractory compositionally complex alloy ID:463-Surface evolution in a stainless steel induced by electrochemical hydrogen charging
Schwarz, Michael S.	ID:208-Modeling and simulation of pyropiezoelectric energy harvesting
Schwarz-Selinger, Thomas	ID:278-Experimental Investigation of Fast Low-Temperature Irradiation Creep – A Novel Experiment for Materials Testing under Extreme Conditions
Schweizer, Ben	ID:335-Data-driven inelasticity enhanced by neural networks: Opportunities in computational mechanics
Schöller, Lukas	ID:550-Simulation of Microstructure Evolution by Integrating Crystal Plasticity in the Multiphase-Field Method
Sedlak, Petr	ID:295-Anisotropic elasticity of strongly textured Ti studied by resonant ultrasound spectroscopy
Sedlak, Petr	ID:236-Cubic symmetry preservation and homogeneity in elastic properties of β+ω and β+α Ti-alloys. An ultrasound-based study
Seefeldt, Marc	ID:545-Determination of Crystal Plasticity Parameters from In-Situ Synchrotron Diffraction
Segatto, Alessandra	ID:253-Wear behaviour of as-built and heat treated AISI S2 Tool Steel processed by Laser Powder Bed Fusion
Segurado, Javier	ID:15-Multi-scale simulation of non-linear cellular- and meta-materials with body-force-enhanced second-order homogenisation ID:339-An Incompatible Finite Element formulation for enhanced representation of solutions in Phase-Field problems: Application to Regularized Fracture ID:325-Multiscale modelling using recurrent neural network for microscale surrogation to achieve acceleration in simulation of rate-dependent dissipative lattice based and cellular (meta) materials ID:254-A Discrete Slip Plane Approach to Simulate the Deformation of Tungsten Nanostructures ID:333-FFT implementation of a microscopic chemo-mechanical model for damage in lithium batteries ID:337-X-ray in-situ testing and numerical analysis of SLS manufactured lattice structures ID:455-Adaptive grids for FFT based field dislocation mechanics
Segurado, Javier	ID:544-Modeling of hydrogen embrittlement in eutectic high entropy alloys: a FFT-based framework for Phase-Field fracture ID:514-A crack length control method for a Phase Field Fracture model in a fft-based scheme
Seiner, Hanus	ID:236-Cubic symmetry preservation and homogeneity in elastic properties of β+ω and β+α Ti-alloys. An ultrasound-based study
Selles, Nathan	ID:195-A local definition of multiaxiality in elastomers and its application to fatigue testing
Selvam, Vignesh	ID:142- 3D numerical analysis of instability patterns formed at the surface of magnetorheological elastomer film/substrate systems under magneto-mechanical loading.
Selvaraj, Jagan	ID:315-Geometrically Informed Material Clustering for Data-Driven Multi-scale Modelling of Complex Material Architectures
Serpelloni, Mattia	ID:571-Continuum multi-physics modeling of cell and bacteria motility.
Serra, Joël	ID:204-Pin-ended buckling test on plain and open hole composites to evaluate the strain gradient effect on compressive failure ID:451-Numerical simulation and R-curves computation of CFRP Compact Tension tests using the Discrete Ply Model
Serres, Nathalie	ID:303-Quantifying stress intensity factors in fretting tests via digital image correlation
Seupel, Andreas	ID:516- A multi-field mixed incremental variational framework for phase-field modeling of hydrogen-promoted fracture
Shafeeg, Theeba	ID:468-Characterizing the Onset of Cold Welding of CuSn6 Using a Custom Milli-Ohm Meter
Shaikeea, Angkur Jyoti Dipanka	ID:504-Reassessing rubber elasticity through full field X-ray measurements ID:500-Role of topology on the dynamic response of spinodal meta-materials ID:402-Full-field strain measurements in homogeneous solids enabling discovery of new material physics ID:536-Reassessing Strain Gradient Elasticity in Architected Solids: Unveiling Intriguing Meta Behaviours
Shakeri, Mohsen	ID.591- Enhanced the Mechanical Strength of 3D printed PEEK Parts
Shakoor, Modesar	ID:117-Hydrogen-assisted fatigue damage modeling using phase field method
Shamim, Muhammad Babar	ID:60-Efficient variational three-field reduced order modeling for nearly incompressible materials
Shaw, Pratik Kumar	ID:567- Residual stress and surface integrity of selective laser melted 316L SS: A correlation between experimental and modelling results
Shearer, Tom	ID:279-The effects of network structure on percolation and elastic moduli of fibrous networks
Shen, Zhaoxiang	ID:412-Towards efficient modeling for quantum-informed mechanics of polymers: a DFTB+MBD framework
Shettigar, Pranav	ID:437-Neural Operator-Driven Analysis of Heterogeneous Microstructures: Mechanical and Thermal Behaviors
Shi, Riyi	ID:573-Examining force-dependent density-reductions and tau mislocalization in dendritic spines with concomitant alterations in network dynamics in TBI-on-a-chip
Shmatko, Tetyana	ID:263-Investigation of free vibrations of porous functionally graded plates using the R-functions theory
Siddiqui, Amir Hamza Nazir Ahmed	ID:561-Cruciform Specimen Design and Optimization for Biaxial Testing of Carbon Fiber Reinforced Polymer Composites
Siegmund, Thomas	ID:227- Quasi-brittle Fracture Mechanics and Human Cortical Bone
Silva Campos, Pedro José	ID:498-Assessing the energy absorption capability of sustainable hybrid composites
Simar, Aude	ID:369-Characterization of High-Strength Aluminum Alloys Lattice Structures produced using Laser Powder Bed Fusion ID:75-Heterogeneities in solid-state MLFS additively manufactured 7075 aluminium alloy ID:209-Improving mechanical properties in Wire Arc Additive Manufacturing of Aluminium Alloys - exploring laser cleaning ID:307-Thermal management from the build platform for laser powder bed fusion of Fe-Si alloys
Simon, Scott	ID:178-The Effect of Calcification on the Mechanical Behavior of Clot Analogs for Acute Ischemic Stroke
Singh, Agyapal	ID:85-Mechanics of architected interpenetrating phase composites: experimental, numerical and machine learning analysis results
Singh, Agyapal	ID:249-Hybrid manufacturing of metallic metamaterials: Process, microstructure and mechanical response
Singh, Agyapal	ID:249-Hybrid manufacturing of metallic metamaterials: Process, microstructure and mechanical response
Singh, Amit	ID:273-Ratcheting behaviour of SS316L at room and low temperatures
Singh, Amit	ID:494-Cyclic Softening of Ti-6Al-4V subjected to low cycle fatigue: Experiment and Modelling
Singh, Satwinder Jit	ID:05-An Efficient and Accurate Asymptotically Correct Equivalent Single Layer Plate Theory (ACESLT) with Variational Asymptotic Approach for Energy-based Analysis
Singh, Umed	ID:200-Localizing gradient damage model integrated with smoothed finite element method for simulating quasi-brittle fracture
Sioutis, Ioannis	ID:308-Mechanics of interfacial fracture of co-consolidated thermoplastic joints with and without crack stoppers
Sirotti, Stefano	ID:367-A strain energy function for large volumetric deformations of elastomers
Siéfert, Emmanuel	ID:73-Coalescence of slender structures removed from a liquid bath
Sket, Federico	ID:334-Exploring the evolution of mechanical deformation of intact and degraded SLM WE43 scaffolds: An In Situ X-ray Characterization
Slagter, Alejandra	ID:562-Micromechanical properties of MnO-SiO2-Al2O3 inclusions in iron
Slodczyk, Iwo	ID:182-A fuzzy inference model for prediction of delay risk associated with low rail-wheel adhesion
Smaniotto, Benjamin	ID:406-Quantification of internal damage during tensile straining of LPBF-manufactured cellular materials with random voids
Smerdova, Olga	ID:131-Investigation of mechanical dissipation effects during cyclic nanoindentation of thermally aged filled elastomer networks ID:168-Mechanical heterogeneities in spherulitic microstructures of semi-crystalline polymers: quantitative characterization from micrometric to nanometric scales using nanoindentation and atomic force microscopy
Smilauerova, Jana	ID:236-Cubic symmetry preservation and homogeneity in elastic properties of β+ω and β+α Ti-alloys. An ultrasound-based study
Soana, Valentina	ID:171-Design and control of shape-changing elastic robotic structures
Sonawane, Dipali	ID:317-Compression of dewetted nickel microparticles at ultra-high strain rates
Sonzogni, Max	ID:490- On the triaxial compression of dense cohesive granular materials
Sosa, Raul Ian	ID:412-Towards efficient modeling for quantum-informed mechanics of polymers: a DFTB+MBD framework
Souslov, Anton	ID:210-The elastic Leidenfrost effect: An interplay between vaporization rate, gas flow rate, and shape.
Southern, Thomas	ID:135-Profilometry-based Indentation Plastometry (PIP), a Technique to Measure Stress-Strain Curves from Indentation
Sozio, Fabio	ID:09-The nonlinear elastic response of bicontinuous rubber blends
Sperling, Sven	ID:105-A continuum consistent discrete particle method: phase changes and scratching of silicon
Sreenivasa Rao, Pavan	ID:586-Deformation behavior Analysis of P91 Martensitic Steel: Micropillar Tests and Crystal Plasticity Modelling
St-Pierre, Luc	ID:435-Fracture toughness of hierarchical lattices
Stainier, Laurent	ID:361-A strain based Lipschitz regularization in Data Driven Computational Mechanics ID:505-Data-driven games for computational multiscale mechanics of materials
Stanislav, Kracnitckii	ID:226-The Stability of Hollow Multiply Twinned Particles within the Principles of the Irreversible Thermodynamics
Steiakakis, Konstantinos	ID:205-Simulation framework for the chemical degradation in polymeric solids
Steinmann, Paul	ID:370-Data-adaptive modeling of hyperelastic constitutive laws: application to extremely soft materials ID:415- Identification of inelastic interphase properties in polymer nanocomposites based on molecular dynamics
Stempin, Paulina	ID:553-Space-Fractional Continuum Mechanics as a Method of Capturing the Scale Effect
Stoklasova, Pavla	ID:236-Cubic symmetry preservation and homogeneity in elastic properties of β+ω and β+α Ti-alloys. An ultrasound-based study
Stricot, Pauline	ID:257-Characterization of the deformed state before the onset of recrystallization in pure aluminium by in situ SEM tensile tests and CPFEM simulations ID:179-Experimental characterisation of the hardening mechanisms of an aluminium alloy produced by the L-PBF process
Stupkiewicz, Stanisław	ID:386-Phase-field modeling of deformation twinning and its interaction with plastic slip during nano-indentation ID:537-Twin branching in shape memory alloys: a 1D continuum model accounting for the energy dissipation effects
Subbian, Jayachandran	ID:217-Effect of elastic strains on the catalytic activity of gold thin films for HER and ORR
Subramani, Anbazhagan	ID:589- Experimental Characterisation of Notch non-Linearities in Pseudo-Ductile Composite Laminates
Suiker, Akke	ID:30-Anisotropic elastic strain-gradient continuum from the macro-scale to the granular micro-scale
Sumelka, Wojciech	ID:553-Space-Fractional Continuum Mechanics as a Method of Capturing the Scale Effect
Sun, Jun	ID:39-Deformation mechanisms of Ti polycrystals from 3D diffraction contrast tomography and high-resolution digital image correlation data: experiments and simulations
Susmel, Luca	ID:213-Data-driven methodologies to estimate process parameters, design parameters and mechanical properties of fused deposition modelling polylactide components
Swolfs, Yentl	ID:34-Determining the interlaminar fracture toughness of specimens with material or layup asymmetry: the key issues
Syed, Amer	ID:37-The design of lightweight geared mechanical metamaterials optimised for elastic strain energy absorption
Szajek, Krzysztof	ID:553-Space-Fractional Continuum Mechanics as a Method of Capturing the Scale Effect
Sánchez Rua, M.T.	ID:417-Mechanochemical inhibition of growth in avascular tumours
T
Tadrist, Loïc	ID:281-Macroscopic mechanical properties of pressurized cellular solids ID:177-Softening and stiffening of pressurized cellular solids: Experiments and modelling
Tafaoli-Masoule, Mojtaba	ID.591- Enhanced the Mechanical Strength of 3D printed PEEK Parts
Tagarielli, Vito L.	ID:570-A data-driven framework to establish surrogate constitutive models of viscoelastic porous elastomers
Talebi, Nasrin	ID:378-Simulation methodology for predicting initiation of surface cracks in railway rails
Tan, Pj	ID:440-Multi-objective shape optimisation of periodic lattices
Tan, Wei	ID:539-Designing achitected structures with tailored transport-thermal-mechanical performance using data-driven methods
Tang, Xiao-Zhi	ID:89-Modulating Grain Boundary-Mediated Plasticity of High-entropy Alloys via Chemo-Mechanical Coupling ID:100-Inhibition Effect of Segregation and Chemical Order on Grain Boundary Migration in NbMoTaW Multiprincipal Element Alloy
Tanguy, Alexandre	ID:176-Coupling a continuous wave laser with a scanning electron microscope to achieve characterisation and improvement of additively manufactured materials microstructure
Tanguy, Alexandre	ID:224-Investigating the role of microstructural features in plastic deformation of friction-stir deposited aluminum
Tani, Marie	ID:55-Deploying Complex shapes using Kirigami
Tarale, Janhavi Anilkumar	ID:428-Elastic Instability in Soft Particulate Composites with Stiffening Behavior
Tarantino, Angelo Marcello	ID:147-Analytic insights on isotropic energy forms based on experiments of finite torsion
Tarantino, Angelo Marcello	ID:367-A strain energy function for large volumetric deformations of elastomers
Tarantino, Gabriella	ID:406-Quantification of internal damage during tensile straining of LPBF-manufactured cellular materials with random voids ID:161-An investigation of the role of defects on the mechanical response of LPBF-manufactured architected cellular materials with random pores features
Tarantino, Gabriella	ID:290-Mechanical behavior of elastomeric bistable dome shell with tunable energy barrier asymmetry
Tardif, Nicolas	ID:155-Numerical simulation of additive manufacturing based on fused deposition modeling: Application to the prediction of geometric deviations and mechanical performances of 3D printed prosthetic devices
Tchuindjang, Jérôme Tchoufang	ID:253-Wear behaviour of as-built and heat treated AISI S2 Tool Steel processed by Laser Powder Bed Fusion
Ter Ovanessian, Benoit	ID.592-Challenging pressure-free debinding/sintering of Magnesium alloy: application to 3D printed parts by direct-ink writing
Terada, Kenjiro	ID:101-Surrogate modeling for computational homogenization of viscoplastic composites
Teresi, Luciano	ID:467-Swelling theory for multidomain materials ID:329-Pore morphology development in viscoelastic foods during drying ID:438-Modeling Self-oscillation in Immersed Liquid Crystal Elastomer Beams under Constant Light: A Multi-physics Approach
Terrones, Humberto	ID:471-On the identification of stretching-dominated topologies based on Triply Periodic Minimal Surfaces
Tervoort, Theo	ID:577-No Yield Stress for Yield-Stress Fluids
Tervoort, Theo A.	ID:250-Mechanical identification and modelling of impregnated Nb3Sn Rutherford cable stacks under compressive loading
Tesar, Karel	ID:295-Anisotropic elasticity of strongly textured Ti studied by resonant ultrasound spectroscopy
Tewari, Asim	ID:561-Cruciform Specimen Design and Optimization for Biaxial Testing of Carbon Fiber Reinforced Polymer Composites
Texier, Damien	ID:356-Advanced characterization techniques to inform digital twins of deformed Inconel 718 and predict plastic localization using FFT-based simulations
Thbaut, Manon	ID:08-Higher-order boundary conditions for asymptotic homogenization
Thomas, Jean-Christophe	ID:265-Nonlinear plate theory for inflatable panels: theoretical, numerical and experimental investigations
Thomas, Olivier	ID:564- In situ three-dimensional observation of plasticity onset in a Pt nanoparticle
Thorsson, Lena	ID:389-Relating laser powder bed fusion process parameters to (micro)structure and to soft magnetic behaviour in a Fe-based bulk metallic glass
Thuinet, Ludovic	ID:47-Phase-field modelling of grain boundaries for radiation induced segregation predictions
Tiberto, Paola Maria	ID:389-Relating laser powder bed fusion process parameters to (micro)structure and to soft magnetic behaviour in a Fe-based bulk metallic glass ID:556- Influence of Thickness on the (Micro)structure and the Magnetic behavior of Kuamet6B2 Thin Walls
Tillier, Yannick	ID:469-Mechanics of Anisotropic PVA Hydrogel Fibers as Biomimetic Soft Tissue Substitutes
Tin, Sammy	ID:19-Time effects on the plastic deformation of single crystals
Tioguem-Teagho, Frank	ID:285-Characterization of cleavage initiation sites in relation to the microstructure and tempering conditions of a Reactor Pressure Vessel steel
Tiwari, Priya	ID:513-Yield locus development of TIG Welded AA2219 alloy using cruciform samples
Tkatchenko, Alexandre	ID:412-Towards efficient modeling for quantum-informed mechanics of polymers: a DFTB+MBD framework
Todt, Melanie	ID:173-Simulations of the postbuckling response of lattice beams using micropolar continuum theory
Tomassetti, Giuseppe	ID:111-Competition between epithelial tissue elasticity and surface tension in cancer morphogenesis ID:414-Viscoelastic Properties of Magnetorheological Elastomers for Multilayered Semi-Active Damper Applications
Toscano-Angulo, Juan José	ID:239-Mechanic-Based Therapies in Osteoporosis: A Multimodal approach
Toualbi, Louise	ID:179-Experimental characterisation of the hardening mechanisms of an aluminium alloy produced by the L-PBF process ID:224-Investigating the role of microstructural features in plastic deformation of friction-stir deposited aluminum
Toualbi, Louise	ID:257-Characterization of the deformed state before the onset of recrystallization in pure aluminium by in situ SEM tensile tests and CPFEM simulations
Toualbi, Louise	ID:261-Experimental study and modeling of bending behavior in temperature of a SMAT-treated Ni-based superalloy
Toubal, Lotfi	ID:524-Experimental and numerical investigation of the inter-laminar shear behavior of flax/epoxy composite laminate
Tourret, Damien	ID:289-Advanced characterization of Additively Manufactured Functionally Grade Materials (FGMs) coupled with Thermodynamic Simulations.
Tran, Trieu Duy	ID:557- Influence of microstructure and interlocking on mechanical behavior of agglomerates of hexapod-shaped particles
Tran, Yvette	ID:132-Mechanical response of a hydrogel: from small deformations to the dehydration-induced glass transition
Tressou, Benjamin	ID:540-An extended version of the variational EIV approach for the homogenization of composites with generalized Maxwell matrix
Tretiak, Iryna	ID:427-Characterising the effect of void morphology on composites strength using deep learning
Triantafyllou, Savvas	ID:436-Phase Field Fracture in 3D Printed Fibre Reinforced Composites Using Virtual Elements
Tricarico, Michele	ID:495-Tuning the adhesion properties of soft viscoelastic interfaces by dynamic excitation
Trivino, Yohann	ID:566-A new numerical model for the elasto-plastic behavior of cellular materials
Tromas, Christophe	ID:168-Mechanical heterogeneities in spherulitic microstructures of semi-crystalline polymers: quantitative characterization from micrometric to nanometric scales using nanoindentation and atomic force microscopy
Tronci, Giuseppe	ID:498-Assessing the energy absorption capability of sustainable hybrid composites
Tserpes, Konstantinos	ID:308-Mechanics of interfacial fracture of co-consolidated thermoplastic joints with and without crack stoppers
Tsokanas, Panayiotis	ID:34-Determining the interlaminar fracture toughness of specimens with material or layup asymmetry: the key issues
Tsoutsouva, Maria	ID:179-Experimental characterisation of the hardening mechanisms of an aluminium alloy produced by the L-PBF process
Tu, Ruixuan	ID:213-Data-driven methodologies to estimate process parameters, design parameters and mechanical properties of fused deposition modelling polylactide components
Tumanov, Nicolay	ID:127-Ultra-miniaturised fracture toughness testing of nanostructured tungsten films in the context of nuclear fusion
Tuninetti, Víctor	ID:149-Formulation of mean-field model for the accurate prediction of creep deformation of alloy 800H under very-high temperature and low-stress loadings
Twisungemariya, Alain	ID:323-Understanding the impact of the texture on the bendability of aluminium sheets
Türkoğlu, Olcay	ID.461-On the local stress information from a partial unload with in situ microscopic digital image correlation
U
Ul Haq, Ihtasham	ID:141-Room temperature electron beam sensitive viscoplastic response of ultra-ductile Al/a-Al2O3 model system ID:319-Stress-induced amorphization and grain boundary sliding in olivine
Upadhyay, M.V.	ID:151-Icosahedral short-range order mediated twin formation in laser direct energy deposited 316L stainless steel with silicon ID:442- In-process alteration of Ti6Al4V microstructure during additive manufacturing ID:176-Coupling a continuous wave laser with a scanning electron microscope to achieve characterisation and improvement of additively manufactured materials microstructure ID:485-Decoupling elastic and thermal strains in operando X-ray diffraction measurements in directed energy deposition additive manufacturing using fast numerical strategy ID:446-Understanding stress-plastic strain evolution of AM 316L steel microstructures due to post process laser scanning: experiment-driven thermomechanical study
Ur Rehman, Ateeq	ID:21-The stab resistance of Bombyx mori silk cocoons
Urdeitx, Pau	ID:181-A comparison of Single- and Double-generator formulations for Thermodynamics-Informed Neural Networks
V
Vaccaro, Marzia Sara	ID:579-Higher-order nanobeams based on stress-driven integral elasticity
Vaezi, Mohammad	ID.591- Enhanced the Mechanical Strength of 3D printed PEEK Parts
Valdivia-Camacho, Miguel A.	ID:40-Energetics of Mixed-Mode Crack Propagation around Geometric Discontinuities on Thick Composite Structures
Valilla, Jorge	ID:289-Advanced characterization of Additively Manufactured Functionally Grade Materials (FGMs) coupled with Thermodynamic Simulations.
Vallet, M.	ID:151-Icosahedral short-range order mediated twin formation in laser direct energy deposited 316L stainless steel with silicon ID:176-Coupling a continuous wave laser with a scanning electron microscope to achieve characterisation and improvement of additively manufactured materials microstructure
Vallot, Sylvain	ID:356-Advanced characterization techniques to inform digital twins of deformed Inconel 718 and predict plastic localization using FFT-based simulations
van Breemen, Lambèrt C. A.	ID:205-Simulation framework for the chemical degradation in polymeric solids
van den Broek, Kasper	ID:105-A continuum consistent discrete particle method: phase changes and scratching of silicon
van den Broek, Sten	ID:499-Constitutive modelling of injection moulded short-fiber reinforced polypropylene: characterisation and model application ID:434-Capturing fatigue crack propagation of isotactic polypropylene: effects of temperature and molecular weight
van der Sman, Ruud	ID:467-Swelling theory for multidomain materials ID:329-Pore morphology development in viscoelastic foods during drying
van Dommelen, Hans	ID:336-An uncoupled two-scale finite element model to investigate air entrapment during PET polymer thin film lamination ID:499-Constitutive modelling of injection moulded short-fiber reinforced polypropylene: characterisation and model application ID:93-Structure-Property Relations for Semi-Crystalline iPP Polymorphs ID:211-Micro-mechanical modeling of semi-crystalline PEEK
van Hecke, Martin	ID:76-Storing Driving History within Beam Counter Metamaterials
van Hecke, Martin	ID:496-Multiperiodic responses and memory effects in frustrated sheets
Van Loock, Frederik	ID:191-Nanoindentation of strong and ductile Al2O3/Al hybrid nanolaminates
Van Oosterwyck, Hans	ID:548-Advanced inverse formulations for 3DTFM: regularized and non-regularized strategies for traction reconstruction
Van Petegem, Steven	ID:547-Operando tomographic microscopy during laser-based powder bed fusion. ID:312-Towards 3D architected materials in Laser Powder Bed Fusion via local microstructure control, in situ alloying and multi-material printing ID:546-Real-time monitoring of the microstructure evolution during laser powder bed fusion ID:442- In-process alteration of Ti6Al4V microstructure during additive manufacturing ID:485-Decoupling elastic and thermal strains in operando X-ray diffraction measurements in directed energy deposition additive manufacturing using fast numerical strategy
Van Roy, Simon	ID:307-Thermal management from the build platform for laser powder bed fusion of Fe-Si alloys
Vani, Nathan	ID:264- The Y-rod test ID:259-Harnessing stiffness asymmetry in thin sheets inflatables for high deformation shape morphing
Vanmeensel, Kim	ID:545-Determination of Crystal Plasticity Parameters from In-Situ Synchrotron Diffraction
Vanpee, Sophie	ID:269- Influence of crystallization conditions on local matrix mechanical properties and fracture behavior of carbon fiber-reinforced PEEK composite
Vanson, Jean-Mathieu	ID:218-Simulation of packing kinetic and diffusive properties of fragment beds using the DEM-FFT method ID:490- On the triaxial compression of dense cohesive granular materials
Varas, David	ID:387-Experimental study of polymer-based 3D auxetic structures manufactured by SLA.
Vasiukov, Dmytro	ID:117-Hydrogen-assisted fatigue damage modeling using phase field method
Vassilev, Valentín	ID:217-Effect of elastic strains on the catalytic activity of gold thin films for HER and ORR ID:24-Combining machine learning and in-situ EBSD to assess the influence of microstructure on twinning in polycrystal Mg
Vattré, Aurélien	ID:283-Finite element simulations of jerky flow in nickel-based superalloy IN718
Velasco GonzÁlez, Antonio	ID:282-The influence of matrix and fibers on the mechanical response of recycled fiber-reinforced polymer composites from aeronautic sector
Vella, Dominic	ID:150-Delamination from an adhesive sphere: Curvature-induced dewetting versus buckling
Venegas, Rodolfo	ID:407-Poro acosutics with evaporation/condensation
Vennat, Elsa	ID:379-Multiaxial characterization of 3D printed polymers for patient-specific surgical simulators
Verbeeck, Johan	ID:292-Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films
Verga, Fabrizio	ID:547-Operando tomographic microscopy during laser-based powder bed fusion.
Verhoosel, Clemens V.	ID:327-Mesoscale modelling of complex textile-reinforced composite materials using the finite cell method
Verlinde, Wim	ID:209-Improving mechanical properties in Wire Arc Additive Manufacturing of Aluminium Alloys - exploring laser cleaning
Vermant, Jan	ID:577-No Yield Stress for Yield-Stress Fluids
Vermeij, Tijmen	ID:572-Unraveling martensite micro-mechanics, by nano- to macro-scale in-situ testing & CP modelling
Vernier, Patricia	ID:443- Homogenization of composite materials with fractional viscoelastic constituents
Verron, Erwan	ID:195-A local definition of multiaxiality in elastomers and its application to fatigue testing
Vidoli, Stefano	ID:252-Emerging anisotropy and tethering with memory effects in fibrous materials
Vieira, Marion	ID:237-An imaging technique for the strain-engineering of deformable electrodes
Vigneshwaran, R	ID:558-On the effect of the third stress invariant in ductile failure: microscopic and macroscopic aspects
Vilatela, Juan J.	ID:358-Mechanics and damage tolerance of nanowire network materials
Vincent, Benoît	ID:348-Ageing of a PBSAT fishing net: a multiscale study
Vivet, Alexandre	ID:241- Influences of mechanical and water aging on changes in mechanical behavior and damage mechanisms on sandwich structures used as windturbine blades in marine environment (EMR)
Vogiatzis, Georgios G.	ID:205-Simulation framework for the chemical degradation in polymeric solids
Vokoun, David	ID:295-Anisotropic elasticity of strongly textured Ti studied by resonant ultrasound spectroscopy
von Dem Bussche, Annette	ID:304-New Mechanics in Cell-Nanomaterial Interactions: Boron Nitride Nanosheets Inducing Water Channels Across Lipid Bilayers
von Oertzen, Vincent	ID:486-Rate-Independent Phase-Field Framework for Hysteretic Behavior of Phase Transforming Solids
von Zabiensky, Max	ID:165-Thermodynamic topology optimization for hyperelasticity with varying time integration schemes and arc-length control
Voss, Jendrik	ID:107-Mechanical metamaterials: frequency-independent enriched continua from frequency-dependent models ID:207-Finite-size metamaterials and non-coherent reduced relaxed micromorphic interfaces
Votsios, Vasilis	ID:585- On the influence of cryogenic temperatures on CFRP laminates subjected to impulsive loadings
Vu, Duc Chung	ID:595-Macro-elasticity of granular materials composed of polyhedral particles
Vázquez-Prudencio, Antonio	ID:118-On the connection between cellular design, defects, and fatigue performance in additively manufactured metamaterials
W
Wachter, Hans-Juergen	ID:389-Relating laser powder bed fusion process parameters to (micro)structure and to soft magnetic behaviour in a Fe-based bulk metallic glass
Waitukaitis, Scott	ID:210-The elastic Leidenfrost effect: An interplay between vaporization rate, gas flow rate, and shape.
Walisiak, Weronika	ID:231-Design and numerical analysis of bionic – inspired ceiling panels in terms of their dynamic properties. ID:230-Experimental measurements of forced vibrations of bionic-inspired ceiling tiles ID:228-Design and numerical analysis of bionic – inspired ceiling panels in terms of the air flow
Walsh, Daniel	ID:178-The Effect of Calcification on the Mechanical Behavior of Clot Analogs for Acute Ischemic Stroke
Walsh, Michael	ID:532-Microscale Mechanical Testing of Lower Limb Vasculature
Wang, Bingquan	ID:42-Recent Advances in Peridynamics
Wang, Hui	ID:191-Nanoindentation of strong and ductile Al2O3/Al hybrid nanolaminates
Wang, Jiayu	ID:136-Capillarity-induced Wrinkling in Fibrous Liquid-Infused Membranes
Wang, Jin	ID:400-Mechanical behavior of grain boundaries containing precipitates in a refractory compositionally complex alloy
Wang, Meng	ID:355-Crack tip kinematics reveal the process zone structure in brittle hydrogel fracture
Wang, Weidi	ID:560-Reduced order modeling of dynamics of cellular low-frequency resonant metamaterials for design and optimization
Wang, Yi	ID:315-Geometrically Informed Material Clustering for Data-Driven Multi-scale Modelling of Complex Material Architectures
Wang, Zifan	ID:504-Reassessing rubber elasticity through full field X-ray measurements ID:402-Full-field strain measurements in homogeneous solids enabling discovery of new material physics
Waters, Sarah	ID:106-Fluid-structure interaction model for hydrocephalus shunt systems
Wautier, Antoine	ID:374-Critical state seen as an emerging property in granular materials
Wegener, Konrad	ID:547-Operando tomographic microscopy during laser-based powder bed fusion.
Wei, Xinyue	ID:355-Crack tip kinematics reveal the process zone structure in brittle hydrogel fracture ID:363-Toughening of brittle solids via crack front complexity
Wei, Yujie	ID:305-Stress intensity factors and energy release rates of both deflected and branched cracks
Wei, Yuyang	ID:203-Mechanics in Forensic Science: predicting Traumatic Brain Injury via mechanics enhanced machine learning ID:272-Machine learning-based prediction of brain mechanics in sports-like head-to-head collisions
Weinberg, Kerstin	ID:505-Data-driven games for computational multiscale mechanics of materials
Weisbecker, Romain	ID:285-Characterization of cleavage initiation sites in relation to the microstructure and tempering conditions of a Reactor Pressure Vessel steel
Weisz-Patrault, Daniel	ID:184-Upscaling transformation plasticity in steel based on full field FFT simulations of polycrystals undergoing phase transformations under applied loads ID:397-From thermal activity in DED process to microstructure prediction
Weisz-Patrault, Daniel	ID:485-Decoupling elastic and thermal strains in operando X-ray diffraction measurements in directed energy deposition additive manufacturing using fast numerical strategy
Weitkamp, Timm	ID:429-Agglomerate crack propagation under micro-compression as seen by phase-contrast tomography
Weston, Paula	ID:304-New Mechanics in Cell-Nanomaterial Interactions: Boron Nitride Nanosheets Inducing Water Channels Across Lipid Bilayers
Wieners, Christian	ID:445-Dynamic phase-field fracture with a first-order discontinuous Galerkin method for elastic waves
Wiesheier, Simon	ID:370-Data-adaptive modeling of hyperelastic constitutive laws: application to extremely soft materials
Williams, Paul Luis	ID:112-Experimental screening of mechanical and corrosion behavior as well as biocompatibility of Zn alloys for biomedical applications
Willner, Kai	ID:83-Viscoelastic characterization of ultrasoft material by unifying different time and length scales
Wirowski, Artur	ID:231-Design and numerical analysis of bionic – inspired ceiling panels in terms of their dynamic properties. ID:230-Experimental measurements of forced vibrations of bionic-inspired ceiling tiles ID:228-Design and numerical analysis of bionic – inspired ceiling panels in terms of the air flow ID:232-Static and Dynamic Analysis of Bidirectionally Sinusoidal Corrugated Steel Shells: A Comparative FEA Study
Wisdorff, Grégoire	ID:145-Development of HCF testing for small cracks propagation study
Withers, Philip	ID:262-X-ray CT of AM Defects and their Role in Fatigue
Witz, Jean-François	ID:242_Stress field estimation for a 316L stainless steel through full-field measurement ID:397-From thermal activity in DED process to microstructure prediction ID:234-Experimental investigation of early strain localizations of ferrite-pearlite steel with microstructure gradient under cyclic loading.
Wu, Huichao	ID:463-Surface evolution in a stainless steel induced by electrochemical hydrogen charging
Wu, Ling	ID:15-Multi-scale simulation of non-linear cellular- and meta-materials with body-force-enhanced second-order homogenisation ID:325-Multiscale modelling using recurrent neural network for microscale surrogation to achieve acceleration in simulation of rate-dependent dissipative lattice based and cellular (meta) materials ID:16-A Self-consistent Reinforced minimal Gated Recurrent Unit for surrogate modelling of elasto-plastic multi-scale problems
Wu, Rui	ID:533-Micro-Mechanics Informed Neural Operator Framework for Multiscale Polycrystalline Material Behaviour
Wulfinghoff, Stephan	ID:160-A novel statistically compatible hyper-reduction method for computational homogenization ID:60-Efficient variational three-field reduced order modeling for nearly incompressible materials ID:318-Thin-film stripe-shaped magnetic domain continuum theory ID:35-Numerically efficient solution methods in highly nonlinear variational thermomechanics
Wurdermann, Helge	ID:171-Design and control of shape-changing elastic robotic structures
Wylie, Mark	ID:468-Characterizing the Onset of Cold Welding of CuSn6 Using a Custom Milli-Ohm Meter
Węglewski, Witold	ID:121-Testing and phase-field modeling of fracture in Al2O3/Cr and Al2O3/AlSi12 metal-matrix composites under quasi-static and dynamic loads
X
Xia, Wenxuan	ID:42-Recent Advances in Peridynamics
Xiang, Yuhai	ID:457-Rate-dependent instabilities in soft visco-hyperelastic composites
Xie, Chen	ID:421- Instability analysis of layered magnetoactive elastomers
Xie, Jichang	ID:75-Heterogeneities in solid-state MLFS additively manufactured 7075 aluminium alloy
Xu, Bai-Xiang	ID:277-Chemo-mechanical Damage Modeling of the Impact of Microstructure on Performance and Cracking in Polycrystalline Lithium-ion Battery Cathode Active Material ID:33-Data-driven inverse design of bimaterial strut-based lattice structures ID:390-A length scale insensitive cohesive phase-field model for inter-/trans- granular fractures: application to image-based reconstructed NMC cathode particles
Xu, Chuan	ID:97-Modeling the Statistical Distribution of Fatigue Crack Formation Lifetime in Large Volumes of Polycrystalline Microstructures
Xu, Yilun	ID:169-Crystal Plasticity Modelling of Zirconium Welds under Cyclic Irradiation-Temperature Synergy
Y
Yadav, Vipin Kumar	ID:479-Large deformations in strain-gradient special Cosserat rods
Yakir, Gilad	ID:238-Waltzing with Instabilities to Morph Rotating Structures
Yamamoto, Ryota	ID:208-Modeling and simulation of pyropiezoelectric energy harvesting
Yamanaka, Yosuke	ID:101-Surrogate modeling for computational homogenization of viscoplastic composites
Yamazaki, Yusuke	ID:437-Neural Operator-Driven Analysis of Heterogeneous Microstructures: Mechanical and Thermal Behaviors
Yang, Biaobiao	ID:24-Combining machine learning and in-situ EBSD to assess the influence of microstructure on twinning in polycrystal Mg
Yang, Bo	ID:320-Wave propagation in graphene-based functional architectures: Dynamics captured by homogenization
Yang, Qing	ID:71-Harnessing Gradients for Self-Assembly of Peptide-Based Nanocapsules: A Pathway to Advanced Drug Delivery Systems
Yao, Qi	ID:457-Rate-dependent instabilities in soft visco-hyperelastic composites
Yastrebov, Vladislav	ID:342-Macroscopic intermittent plasticity model by avalanches
Yavas, Denizhan	ID:472-Bioinspired Soft-Hard Interfaces Fabricated by Multi-material Additive Manufacturing: A Fracture Mechanics Investigation using Essential Work of Fracture
Ye, Yang	ID:291-Asymptotic higher order homogenization of discrete microstructures
Yehya, Sarah	ID:564- In situ three-dimensional observation of plasticity onset in a Pt nanoparticle
Yonkova, Velislava	ID:399-High temperature nanoindentation of different metals: evaluating thermal drift, frame stiffness and composition effects on the mechanical properties
Yousfi, Mohamed	ID:155-Numerical simulation of additive manufacturing based on fused deposition modeling: Application to the prediction of geometric deviations and mechanical performances of 3D printed prosthetic devices
Yu, Haiyang	ID:368-A Gurson-type model unifying hydrogen enhanced plasticity and decohesion
Yu, Jing	ID:71-Harnessing Gradients for Self-Assembly of Peptide-Based Nanocapsules: A Pathway to Advanced Drug Delivery Systems
Yuan, Fenghou	ID:71-Harnessing Gradients for Self-Assembly of Peptide-Based Nanocapsules: A Pathway to Advanced Drug Delivery Systems
Z
Zaera, Ramón	ID:235-Dynamic Actuation Modes in Magneto-Responsive Bistable Structures: A Rate-Dependent Approach ID:45-Continualization of microstructured plates based on a beam-grid lattice for the development of novel continuum models accounting for scale effects
Zahedi, Abolfazl	ID.591- Enhanced the Mechanical Strength of 3D printed PEEK Parts
Zaiser, Michael	ID:247-Controlling damage localization through hierarchical microstructure
Zambelli, Sylvain	ID:248-Influence of yield surface on stress redistribution and strain localization in a flat notched sample for turbine disk application ID:283-Finite element simulations of jerky flow in nickel-based superalloy IN718
Zanetti Ferreira, Thales	ID:126-Experimental characterisation and modelling of electrospun biomedical fibres
Zapata, Rodrigo	ID:425-Laser powder bed fusion of NiTi alloy parts for cardiovascular applications
Zarzoso, Gabriel	ID:544-Modeling of hydrogen embrittlement in eutectic high entropy alloys: a FFT-based framework for Phase-Field fracture ID:333-FFT implementation of a microscopic chemo-mechanical model for damage in lithium batteries
Zarzoso, Moises	ID:541-Deep-learning-based impact localization in PAEK/CF panels
Zarzour, Noura	ID:79-Compressed earth blocks for masonry buildings in seismic zone
Zhai, Xinyuan	ID:330-Dialogue between brittle fracture mechanics and experiments using additive manufacturing to study crack propagation in anisotropic materials
Zhang, Jishen	ID:344-Plastic chip formation in Swiss cheese the "tête de moine"
Zhang, Quan	ID:66-Hard-Magnetic Soft Metamaterials for Remote Tunability of Elastic Waves
Zhang, Quan	ID:421- Instability analysis of layered magnetoactive elastomers
Zhang, Xiao-Dong	ID:507- Incremental variational approach coupling gradient damage with poroelasticity of saturated media
Zhang, Yinxia	ID:582-The effect of grain boundaries on the fracture toughness of hard coatings
Zhang, Zhiliang	ID:368-A Gurson-type model unifying hydrogen enhanced plasticity and decohesion
Zhao, Wuyang	ID:441-Atomistic-to-continuum coupled simulations for fracture of glassy polymers with non-uniform deformations
Zheng, Xiaoyu Rayne	ID:536-Reassessing Strain Gradient Elasticity in Architected Solids: Unveiling Intriguing Meta Behaviours
Zhou, Shuai	ID:103-Ductility limit predictions for porous materials using a damage coupled CPFEM approach
Zhou, Zhou	ID:563-Protection effectiveness of energy absorbing floors on elderly fall-related hip fractures using whole-body FE simulations ID:376- In-vivo estimation of white matter tract-related deformation under mild head impacts
Zhu, Wenpeng	ID:304-New Mechanics in Cell-Nanomaterial Interactions: Boron Nitride Nanosheets Inducing Water Channels Across Lipid Bilayers
Zitoune, Redouane	ID:524-Experimental and numerical investigation of the inter-laminar shear behavior of flax/epoxy composite laminate
Zoboli, Lorenzo	ID:523- Insulin fluid dynamics and absorption via subcutaneous injection port: a computational study addressing flow obstructions and tissue heterogeneities ID:420-Multiphysics behaviour of photo-activated polymers for tissue bioprinting
Zorkaltsev, Sergei	ID:382-A Molecular Dynamics Study of Nanoporous Aluminum Structures with Predefined Topology
Zou, Guijin	ID:71-Harnessing Gradients for Self-Assembly of Peptide-Based Nanocapsules: A Pathway to Advanced Drug Delivery Systems
Zouari, Ahmed	ID:99-Deformation modes and damage mechanisms of a basal-textured ZnAlMg coating under multiaxial loading
Zumel, Pablo	ID:583-The role of fiber breakage in compression after impact of thermoplastic composites: insights from novel experimental techniques.
Á
Álvarez, Gonzalo	ID:455-Adaptive grids for FFT based field dislocation mechanics
Ó
Ó Bradaigh, Conchúr M.	ID:40-Energetics of Mixed-Mode Crack Propagation around Geometric Discontinuities on Thick Composite Structures
Ö
Östlund, Sören	ID:497- Influence of density on the mechanical properties of dry-formed cellulose fibre network materials