Program for Friday, May 31st: Talk View

PROGRAM FOR FRIDAY, MAY 31ST: TALK VIEW

Days:

previous day

all days

View: with abstracts session overview

8:30

9:00

9:30

10:00

10:30

11:00

11:30

12:00

12:30

13:00

13:30

14:00

14:30

15:00

15:30

16:00

16:30

17:00

08:30-09:30 Jon Molina

09:40-10:00

ID:250-Mechanical identification and modelling of impregnated Nb3Sn Rutherford cable stacks under compressive

X. Kong, A. Brem, D. Martin Araujo, M. Daly, B. Auchmann, T.A. Tervoort

10:00-10:20

ID:280-Development of a simulation model of the thermoforming process of polymer matrix composite materials and definition of a Forming Limit Curve to identify defects and optimize their

Pedrosa Valbuena et.al

10:20-10:40

ID:524-Experimental and numerical investigation of the inter-laminar shear behavior of flax/epoxy composite

F. Batouche, M.F. Ameur, R. Zitoune, C. Morel, L. Toubal

10:40-11:00

ID:140-The contribution of infrared thermography to impact testing at low and high velocities

Julien Berthe, Gérald Portemont, Peroche Alexandre

11:00-11:20

ID:174-Constructing a database of Fully-Uncoupled Multi-Directional (FUMD) specimens for delamination

T. Garulli, A. Arteiro, N. Blanco Villaverde, J. Renart Canalias

11:20-11:40

ID:528-Experimental study of micro-vascular networks embedded in carbon composites for High Energy Physics applications submitted to internal

Matheo Dias, Diego Alvarez-Feito, François Boyer, Philippe Olivier

09:40-10:20

ID:116-FFT-based methods for data reduction and modelling of micromechanical experiments for advanced characterization of

Ricardo Lebensohn

10:20-10:40

ID:544-Modeling of hydrogen embrittlement in eutectic high entropy alloys: a FFT-based framework for Phase-Field

Nabor Jiménez Segura, Gabriel Zarzoso, Javier Segurado

10:40-11:00

ID:254-A Discrete Slip Plane Approach to Simulate the Deformation of Tungsten Nanostructures

Carlos Ruestes, Javier Segurado

11:00-11:20

ID:545-Determination of Crystal Plasticity Parameters from In-Situ Synchrotron Diffraction

M. Diehl, P. Dhekne, N. Prabhu, M. Seefeldt, M. Bönisch, K. Vanmeensel

09:40-10:00

ID:85-Mechanics of architected interpenetrating phase composites: experimental, numerical and machine learning analysis

Nikolaos Karathanasopoulos, Agyapal Singh

10:00-10:20

ID:122-Collapse of hierarchical honeycombs with sandwich-structured cell walls

Omar El Khatib, Andreas Schiffer

10:20-10:40

ID:247-Controlling damage localization through hierarchical microstructure

Christian Greff, Paolo Moretti, Michael Zaiser

10:40-11:00

ID:349-A finite element model of TiAl/TiAlN nano-multilayered coatings

S. Giljean, Y. Gaillard, C. Rousselot, C. Bouillet, F. Richard, M.-J. Pac

11:00-11:20

ID:387-Experimental study of polymer-based 3D auxetic structures manufactured by SLA.

Jordi Martin-Montal, Jesus Pernas-Sanchez, David Varas

09:40-10:00

ID:365-Manufacture of Inserts for High Pressure Aluminum Injection Molds by Additive Manufacturing

Sacchelli, Costa, Michels, Batista, Oliveira Santos, Campos

10:00-10:20

ID:90-Development of adaptative printing parameters for enhanced productivity of L-PBF printed

Bafaluy Ojea et.al

10:20-10:40

ID:268-Mechanical characterization of repaired 7xxx aluminum components via Direct Energy Deposition using novel Al-Mg-Zn

Norberto Jimenez Mena, Nicolas Nutal

09:40-10:00

ID:344-Plastic chip formation in Swiss cheese the "tête de moine"

Jishen Zhang, Alejandro Ibarra, Matteo Cicotti, Marc Rabaud, Benoît Roman

10:00-10:20

ID:50-Wrinkling of indented sheets on viscous fluid

Ayrton Draux, Pascal Damman, Fabian Brau

10:20-10:40

ID:264- The Y-rod test

Nathan Vani, Alejandro Ibarra, Etienne Reyssat, José Bico, Benoît Roman

10:40-11:00

ID:395-Control and instabilities of fracture paths when tearing brittle sheets

B. Roman, A. Ibarra, J. Bico, J.F. Fuentealba, F. Melo

11:00-11:20

ID:146-Fabrication and characterization of soft magnetorheological foams

Zehui Lin, Konstantinos Danas, Laurence Bodelot

11:20-11:40

ID:171-Design and control of shape-changing elastic robotic structures

Valentina Soana, Shahram Sabery, Federico Bosi, Helge Wurdermann

09:40-10:20

ID:366-Multi-scale computational homogenization for interfaces with serrated deformation towards an enriched cohesive interface

Varvara Kouznetsova, Lei Liu, Francesco Maresca, Johan Hoefnagels, Marc Geers

10:20-10:40

ID:06-The Atomistic Origin of Fracture Toughness in Amorphous Silica

Gergely Molnar

10:40-11:00

ID:316-Unraveling the Dynamics of Supershear Mode I Crack Growth

David Kammer, Mohit Pundir, Mokhtar Adda-Bedia

11:00-11:20

ID:200-Localizing gradient damage model integrated with smoothed finite element method for simulating quasi-brittle

Sachin Kumar, Rajeev Kumar, Anshul Pandey, Umed Singh

09:40-10:20

ID:118-On the connection between cellular design, defects, and fatigue performance in additively manufactured

Daniel Barba, Antonio Vázquez-Prudencio, Sergio Perosanz, Conrado Garrido

10:20-10:40

ID:199-Prediction of admissible residual stress using fatigue criteria

Akrache Radouane, Ghorbel Halima

09:40-10:20

ID:304-New Mechanics in Cell-Nanomaterial Interactions: Boron Nitride Nanosheets Inducing Water Channels Across Lipid

Qian, Lucherelli, Weston, Eredia, Zhu, Samorì, Gao, Bianco, von Dem Bussche

10:20-10:40

ID:563-Protection eﬀectiveness of energy absorbing floors on elderly fall-related hip fractures using whole-body FE

Qi Huang, Zhou Zhou, Svein Kleiven

10:40-11:00

ID:71-Harnessing Gradients for Self-Assembly of Peptide-Based Nanocapsules: A Pathway to Advanced Drug Delivery

Qian, Li, Mohanram, Han, Qi, Zou, Yuan, Miserez, Yang, Liu, Gao, Yu

11:00-11:20

ID:21-The stab resistance of Bombyx mori silk cocoons

Ateeq Ur Rehman, Vasileos Koutsos, Parvez Alam

11:20-11:40

ID:188-Lipid Peroxidation-induced Membrane Mechanics Modulation and Nanovesicle Shape Transformation

Changjin Huang, Choon-Peng Chng

09:40-10:20

ID:237-An imaging technique for the strain-engineering of deformable electrodes

C. Rousselot, Y. Gaillard, M. Raschetti, M. Vieira, F. Kanoufi, F. Amiot

10:20-10:40

ID:242_Stress field estimation for a 316L stainless steel through full-field measurement

Qi Hu, Arnaud Beaurain, Jean-François Witz, Ahmed El Bartali, Denis Najjar

10:40-11:00

ID.461-On the local stress information from a partial unload with in situ microscopic digital image

Olcay Türkoğlu, C. Can Aydıner

11:00-11:20

ID:504-Reassessing rubber elasticity through full field X-ray measurements

A.J.D. Shaikeea, Z. Wang, S. Das, A. Joshi, V. Deshpande

09:40-10:20

ID:401-Strain engineering of thin semiconductor films investigated using the residual-stress-actuated on-chip testing

M.-S. Colla, N. Roisin, D. Flandre, J.-P. Raskin, T. Pardoen

10:20-10:40

ID:317-Compression of dewetted nickel microparticles at ultra-high strain rates

Bellón, Bhaskar, Brink, Aymeirich-Armengol, Sonawane, Dehm, Ramachandramoorthy

10:40-11:00

ID:217-Effect of elastic strains on the catalytic activity of gold thin films for HER and ORR

Redondo et.al

11:00-11:20

ID:384-Micro-scale Characterisation of Residual Stresses Generated during Face Turning using Focused Ion Beam Milling and Digital Image

Dorronsoro et.al

09:40-10:20

ID:407-Poro acosutics with evaporation/condensation

Claude Boutin, Rodolfo Venegas

10:20-10:40

ID:226-The Stability of Hollow Multiply Twinned Particles within the Principles of the Irreversible

Kracnitckii Stanislav, Smirnov Andrey, Gutkin Mikhail

10:40-11:00

ID:102-Data-driven simulation of the inelastic behavior of open-cell foam structures

Martin Abendroth, Alexander Malik, Bjoern Kiefer

11:00-11:20

ID:374-Critical state seen as an emerging property in granular materials

Antoine Wautier, Na Deng, Zeyong Liu, François Nicot

09:40-10:20

ID:104-Negative refraction in a single-phase flexural metamaterial with hyperbolic dispersion

Kim Pham, Agnès Maurel, Jean-Jacques Marigo

10:20-10:40

ID:15-Multi-scale simulation of non-linear cellular- and meta-materials with body-force-enhanced second-order

Ling Wu, Javier Segurado, Mohib Mustafa, Ludovic Noels

10:40-11:00

ID:107-Mechanical metamaterials: frequency-independent enriched continua from frequency-dependent

G. Rizzi, J. Voss, S. Hermann, L.A. Perez R., P. Demetriou, A. Madeo

11:00-11:20

ID:383-Dynamics of a multi-supported beam: homogenized models and relevant boundary conditions

Antoine Rallu, Claude Boutin

11:20-11:40

ID:601-Analysis of surface effects based on first and second strain gradient mechanics

Jean-Francois Ganghoffer, Nagham Mawassy, Hilal Reda, S.E. Alavi

09:40-10:20

ID:275-The energy-stepping Monte Carlo method: a highly efficient sampling algorithm for data-driven and statistical

Ignacio Romero, Michael Ortiz

10:20-10:40

ID:203-Mechanics in Forensic Science: predicting Traumatic Brain Injury via mechanics enhanced machine

Wei, Oldroyd, Jayamohan, Jones, Casey, Pena, Baylis, Gilmour, Jerusalem

10:40-11:00

ID:325-Multiscale modelling using recurrent neural network for microscale surrogation to achieve acceleration in simulation of rate-dependent dissipative lattice based and cellular (meta)

Mohib Mustafa, Ling Wu, Ludovic Noels, Javier Segurado

12:00-12:20

ID:297-Experimental and numerical investigation of micro-textured tools fabricated using RµEDM in sustainable machining of

Chandrakant Kumar Nirala, Gaurav Saraf, Sharib Imam

12:20-12:40

ID:323-Understanding the impact of the texture on the bendability of aluminium sheets

A. Twisungemariya, D. Saletti, F. Mas, D. Daniel, L. Laszczyk

12:40-13:00

ID:135-Profilometry-based Indentation Plastometry (PIP), a Technique to Measure Stress-Strain Curves from

Thomas Southern, Jimmy Campbell

13:00-13:20

ID:57-Mechanism of thermally-activated prismatic slip in Mg

Xin Liu, William Curtin

12:00-12:20

ID:578-Effect of Fiber-Fiber Adhesion on the Mechanics of Network Materials

Catalin Picu, Nabeel Amjad

12:20-12:40

ID:196-Multiscale geometric design of friction-based interleaved membranes

Lorenzo Guiducci, Maxie Schneider, Christiane Sauer, Peter Fratzl

12:40-13:00

ID:549-Metainterfaces: how to design a soft contact that obeys a specified friction law?

Antoine Aymard, Emilie Delplanque, Davy Dalmas, Julien Scheibert

13:00-13:20

ID:495-Tuning the adhesion properties of soft viscoelastic interfaces by dynamic excitation

Michele Tricarico, Antonio Papangelo

12:00-12:20

ID:520-Fast cracks in amorphous polymers: unraveling the interplay between near-tip microcracking dynamics and macroscale fracture

Alizée Dubois, Daniel Bonamy, Claudia Guerra, Julien Scheibert, Davy Dalmas

12:20-12:40

ID:355-Crack tip kinematics reveal the process zone structure in brittle hydrogel fracture

Chenzhuo Li, Xinyue Wei, Meng Wang, Mokhtar Adda-Bedia, John Kolinski

12:00-12:20

ID:87-Magneto-mechanical system to evaluate mechanical and functional responses in astrocytes under alternating substrate deformation

Gomez-Cruz et.al

12:20-12:40

ID:523- Insulin fluid dynamics and absorption via subcutaneous injection port: a computational study addressing flow obstructions and tissue

Daniele Bianchi, Lorenzo Zoboli, Francesco Luppino, Alessio Gizzi

12:00-12:20

ID:54-Experimental testing of topology optimized structures with hardening material behavior

Miriam Kick, Philipp Junker

12:20-12:40

ID:179-Experimental characterisation of the hardening mechanisms of an aluminium alloy produced by the L-PBF

Toualbi et.al

12:40-13:00

ID:72-Microstructure characterization of unsaturated wet granular materials using x-ray

Ahmad Awdi, Jean-Noël Roux, Abdoulaye Fall, Camille Chateau

12:00-12:20

ID:362-How GBS and diffusion-aided redundant displacements of adjacent grains contribute to the overall viscosity of a porous

Laurent Delannay, Francis Delannay

12:20-12:40

ID:566-A new numerical model for the elasto-plastic behavior of cellular materials

Y. Trivino, V. Richefeu, F. Radjai, K. Lampoh, J.-Y. Delenne

12:40-13:00

ID:343-Fracture initiation in a cohesive granular layer

Thomas Chau, Claire Lestringant, Anaïs Abramian

13:00-13:20

ID:79-Compressed earth blocks for masonry buildings in seismic zone

N. Zarzour, M.P. Santisi D Avila, D. Mercerat, L. Lenti, M. Oggero

12:00-12:40

ID:530-Hydrogen storage in Mg nanowires: ADP potentials

Pilar Ariza, Miguel Molinos, Michael Ortiz

12:40-13:00

ID:540-An extended version of the variational EIV approach for the homogenization of composites with generalized Maxwell

Carole Nadot-Martin, Benjamin Tressou, Mikael Gueguen

13:00-13:20

ID:138-Multi-scale modelling of material with heterogeneous random micro-structure

Inna Gitman

12:00-12:20

ID:60-Efficient variational three-field reduced order modeling for nearly incompressible materials

Muhammad Babar Shamim, Stephan Wulfinghoff

12:20-12:40

ID:370-Data-adaptive modeling of hyperelastic constitutive laws: application to extremely soft

Simon Wiesheier, Miguel Angel Moreno Mateos, Paul Steinmann

12:40-13:00

ID:315-Geometrically Informed Material Clustering for Data-Driven Multi-scale Modelling of Complex Material

Bassam El Said, Jagan Selvaraj, Yi Wang

13:00-13:20

ID:354-A monolithic hyperintegrated ROM FE² method with clustered training strategy

Nils Lange, Geralf Hütter, Bjoern Kiefer

14:20-15:00

ID:330-Dialogue between brittle fracture mechanics and experiments using additive manufacturing to study crack propagation in anisotropic

V. Lazarus, T. Corre, X. Zhai, S. Brach, A. Léon Baldelli

15:00-15:20

ID:53-When phase field met the coupled criterion

Aurélien Doitrand, Gergely Molnár, Rafael Estevez, Anthony Gravouil

15:20-15:40

ID:590-Simulation of indirect tensile tests of cylindric specimens and extension of the size-effect curves of

Beatriz Sanz, Jaime Planas, Camilo Ramos

15:40-16:00

ID:56-Predicting the intrinsic tensile strength of etched glass using the coupled criterion

Dominique Leguillon, Isabell Ayvaz, Sebastian Schula, Philipp Rosendahl

14:20-14:40

ID:181-A comparison of Single- and Double-generator formulations for Thermodynamics-Informed Neural

Pau Urdeitx, Francisco Chinesta, Elías Cueto

14:40-15:00

ID:324-Micromechanics-informed parametric deep material network for physics behavior prediction of heterogeneous materials with a varying

Tianyi Li

15:00-15:20

ID:16-A Self-consistent Reinforced minimal Gated Recurrent Unit for surrogate modelling of elasto-plastic multi-scale

Ling Wu, Ludovic Noels

16:30-17:00 Awards & Conference Closure

11:40-12:00 Coffee Break

13:20-14:20 Lunch Break