PARC 2020: International Conference on Power Electronics & IoT Applications in Renewable Energy and its Control GLA University, Mathura, Uttar Pradesh, India Pin-281406 Mathura, India, February 28-29, 2020 |
| Conference web page | http://gla.ac.in/parc2020 |
| Submission link | https://easychair.org/conferences/?conf=parc2020 |
| Abstract registration deadline | January 25, 2020 |
| Submission deadline | January 26, 2020 |
| Early Bird Registration Closes | February 5, 2020 |
| Camera Ready Submission | February 10, 2020 |
| Last Date of Registration | February 10, 2020 |
The International Conference on Power Electronics & IoT Applications in Renewable Energy and its Control (PARC 2020) will be organized by Department of Electrical Engineering, GLA University, Mathura, India during 28 th - 29th February 2020 at GLA University, Mathura, India. Looking at the importance of power electronics, IoT and their applications in the modern smart grid and the increasing integration of renewable energy due to increasing environmental concerns, this conference theme is set on “Power Electronics, IoT and Renewable Energy applications”, and it is planned to further explore these research areas. This conference aims to explore the challenges in Future Grid-Interactive Power
Converters regarding control strategies, optimal operation, and corrective actions. PARC 2020 also targets to present latest research on new strategies for overcoming the technical challenges of grid integration of renewable energy systems, such as synchronization of interfaced converters with power grid, operation and control of different power converters in power systems under large shares of renewable energies. The other thrust area of this conference is applications of IoT analytics in renewable energy sector. This conference will be a launch pad for many researchers to present emerging topics on power electronic technologies and renewable energy integration and control for future energy applications.
PARC 2020 would have tutorials, keynotes, panel discussion, paper & poster presentations, and opportunities for industry/trade exhibits, with separate industry sessions and student competitions as an integral part of the conference. It would offer ample networking opportunities for scientific & industrial collaboration.
Submission Guidelines
Guidelines for Submission
- All submissions must be in English only.
- Authors are invited to submit full paper as PDF using the IEEE templates. Paper drafts must be prepared in English with a maximum of six (6) printed pages in IEEE format (10-point font, double-column and A4) including figures, tables and references. The conference reserves the right to refrain from reviewing papers that are significantly longer than 6 pages.
- Prospective authors are kindly invited to submit papers electronically to PARC 2020 through EasyChair. For submission of paper, at least one of the Authors of the paper should be a registered user of Easy Chair. Unregistered authors should first create an account on EasyChair.
- Review process for this conference is BLINDED, which means Authors and Reviewers are restricted from seeing each other's identity. Therefore, the Authors are instructed not to mention the name & affiliation in the manuscript anywhere being submitted for review. Author's name & affiliation details may be included at the time of CAMERA READY Manuscript submission after paper acceptance.
- The maximum no. of words allowed in abstract is 250 words and at least 5 keywords are also required.
- The authors are advised to select only one (i.e. the most suitable) track out of the mentioned tracks in submission page for their submission at the time of submitting the manuscript through EasyChair.
- All papers submitted to PARC 2020 will be checked for plagiarism according to IEEE guideline. If found free of plagiarism, it will be peer reviewed and evaluated based on Novelty, Presentation, Correctness and Relevance to the conference. In case of the minor plagiarism, the authors will be asked to rewrite the paper. In other cases, the paper will be immediately rejected.
- The acceptance of papers along with referees’ comment will be communicated to authors by email. Authors are required to incorporate the comments received in the CAMERA-READY PAPER before final submission.
- The accepted conference papers will be scheduled for presentation either at the technical session or poster session. Presentation of an accepted paper at the conference is a requirement of publication in the conference proceedings.
-
The IEEE word and LATEX format can be accessed from the link below
- https://www.ieee.org/conferences/publishing/templates.html
How to submit paper:
- Log–in to https://easychair.org/conferences/?conf=parc2020
- Please note: the link will be active only till the closing date of submissions.
- Duly fill-in details of authors, affiliations and other particulars.
- Please choose topics within ONE CATEGORY ONLY under which your paper broadly falls in
- Upload PDF file of the paper
Committees
Chief Patron
Shri Narayan Das Agrawal
Patron
Prof A M Agarwal
Honorary General Chair
Prof S N Singh
General Chair
● Prof R P Maheshwari
● Prof Asheesh K. Singh
● Prof Dilip Sharma
Conference Chair & Convener
● Dr Sanjay Kumar Maurya, GLA University, Mathura, India
● Dr Abhilash Kumar Gupta, GLA University, Mathura, India
Publication Chair
Prof B K Panigrahi, IIT Delhi, India
Advisory Committee
● Shri Neeraj Agrawal, GLA University, Mathura, India
● Shri Vivek Agrawal, GLA University, Mathura, India
● Prof Sukumar Mishra, IIT Delhi, India
● Prof S. Samantray, IIT Bhuvneshwar, India
● Prof C.P. Gupta, IIT Roorkee, India
● Prof S.P. Singh, IIT Roorkee, India
● Prof A.K. Pradhan, IIT Kharagpur, India
● Prof Nishchal Verma, IIT Kanpur, India
● Prof Vivek Agrawal, IIT Bombay, India
● Dr U. Parikh, ABB Vadodara, India
● Prof Amitava Chatterjee, Jadavpur University, India
● Prof K.S. Swarup, IIT Madras ,India
● Prof Mahesh Kumar, IIT Madras, India
● Dr Majid Jamil, Professor, Jamia Millia Islamia, India
● Prof Rajeev Tripathi, Director, MNNIT Allahabad, India
● Prof R. K. Singh, MNNIT Allahabad, India
● Prof S.C. Srivastava, IIT Kanpur, India
● Prof Shaikh A. Fattah, BUET, Dhaka, Bangladesh
● Dr Akshay Kumar Rathore, Concordia University, Canada
● Prof Celia Shahnaz, BUET, Dhaka, Bangladesh
● Prof Ramesh Bansal, Sharjah University, UAE
● Prof Asheesh K.Singh, MNNIT Allahabad, India
● Dr Aninda Bose, Senior Editor, Hard Science, Springer
● Prof Satya Sheel, GLA University, Mathura, India
● Prof Shamsuddin Ahmad , GLA University, Mathura, India
● Prof Somesh Dhamija, GLA University, Mathura, India
● Prof Vinay Deolia, , GLA University, Mathura, India
● Prof Ashish Sharma , GLA University, Mathura, India
● Prof Charul Bhatnagar , GLA University, Mathura, India
● Prof A S Jalal, GLA University, Mathura, India
● Prof B R K Gupta, GLA University, Mathura, India
● Prof Vishal Goyal, GLA University, Mathura, India
● Prof Vikas Tripathi, GLA University, Mathura, India
● Prof Aniruddha Pradhan, GLA University, Mathura, India
● Prof Atul Bansal, GLA University, Mathura, India
● Prof Piyush Singhal , GLA University, Mathura, India
● Prof Kamal Sharma, GLA University, Mathura, India
● Prof Shreesh C Chaudhary, GLA University, Mathura, India
● Prof Dipak Kumar Das, GLA University, Mathura, India
● Dr Umesh Sharma, GLA University, Mathura, India
● Prof Diwakar Bhardwaj, GLA University, Mathura, India
Track Chair/ Co-Chair:
● Dr Mohd Rihan, Associate Professor, AMU Aligarh
● Prof Sukumar Mishra, IIT Delhi, India
● Dr Bhavesh K. Bhalja, Associate Professor, IIT Roorkee, India
● Dr Ashish Saini, Associate Professor, DEI Agra, India
● Dr Nitin Singh, Associate Professor, MNNIT Allahabad, India
● Dr Haroon Ashfaq, Assistant Professor, Jamia Millia Islamia, New Delhi, India
● Dr Rajesh Kumar Ahuja, Professor, YMCA, Faridabad, India
● Prof Anwaruddin Anwar, GLA University, Mathura, India
Technical Program Committee:
● Dr Bhavesh Bhalja, IIT Roorkee, India
● Dr Navneet Singh, MNNIT, India
● Dr Shashi Bhusan, NIT Kurukshetra, India
● Dr Pradeep Kumar, NIT Kurukshetra, India
● Dr Aseem Chandel , REC, Mainpuri, India
● Dr Kusum Verma, MNIT, Jaipur, India
● Dr Rimjhim Agrawal, Research Scientist, GE Bangalore, India
● Mr Sachin Soni, Manager- Grid Integration, First Solar Inc., Arizona, USA
● Prof Atul Bansal, GLA University, Mathura, India
● Prof Vishal Goyal, GLA University, Mathura, India
● Dr Ashish Shukla, GLA University, Mathura, India
● Dr Subhash Chandra, GLA University, Mathura, India
● Dr Vinay Tomar, GLA University, Mathura, India
● Dr Nivedita Das, GLA University, Mathura, India
● Dr Ashutosh Tiwari, Technical Lead, ABB Bangalore, India
● Prof A K Saxena, DEI, Agra, India
● Prof S P Singh, IIT Roorkee, India
● Dr Manoj Tripathi, IIT Roorkee, India
● Dr Brijesh Singh, KIET Ghaziabad, India
● Prof Shaikh A. Fattah, , BUET, Dhaka, Bangladesh
● Prof Neeraj Gupta, KIET Ghaziabad, India
● Dr Anshul Agrawal, NIT Delhi, India
● Dr Anmol Ratna Saxena, NIT Delhi, India
● Dr Awadhesh Kumar, MMMTU Gorakhpur, India
● Dr Navdeep Kumar, MMMTU Gorakhpur, India
● Dr V P Singh, NIT Raipur, India
● Dr Saurabh Mani Tripathi, KNIT Sultanpur, India
● Prof Man Mohan Agrawal, DEI Agra, India
● Dr Ashish Saini, DEI, Agra, India
● Prof Mohd. Rizwan Khan, AMU, Aligarh, India
● Dr Chiranjeev Kumar,IIT (ISM) Dhanbad, India
● Dr M Saad Alam, AMU, Aligarh
● Prof Salman Hameed, AMU, Aligarh, India
● Prof R P Payasi, KNIT Sultanpur, India
● Prof Paulson Samuel, MNNIT, Allahabad, India
● Prof Tarun Agrawal, Poornima University, Jaipur, India
● Dr Om Hari Gupta, NIT Jamshedpur, India
● Dr Sanjeev Kumar Raghuvanshi, IIT (ISM) Dhanbad, India
● Prof Gagan Singh, DIT, Dehradun, India
● Dr Rajnish Bhasker, VBSPU, Jaunpur, India
● Prof R K Singh, MNNIT, Allahabad, India
● Dr H P Shukla, UCER, Allahabad, India
● Prof P Thakur, Graphic Era University, Dehradun, India
● Prof R K Singh, MNNIT, Allahabad, India
● Dr Kumar Padmanabh, Senior Researcher, EBTIC, Dubai
● Prof Vikas Gupta, MNIT, Jaipur, India
● Dr B P Pandey, MMMUT, Gorakhpur, India
● Prof K S Verma, KNIT, Sultanpur, India
● Dr B Singh, KNIT, Sultanpur, India
● Dr Jai Govind Singh, AIT, Thailand
● Dr Sanjay Agrawal, IGNOU, Delhi, India
● Dr Ajeet Singh, KIET, Ghaziabad, India
● Dr Venu Sangwan, Graphic Era University, Dehradun, India
● Dr Vinay Jadoun, NIT Delhi, India
● Dr Sujil A., BSDU, Jaipur, India
● Dr Narayanan K, Shastra University, Tamil Nadu, India
● Dr Shahbaz A. Siddiqui, Manipal University, Jaipur, India
● Dr Neeraj Kanwar, Manipal University, Jaipur, India
● Dr Manoj Kumawat, Motihari College of Engineering, Motihari, India
● Dr Nand Kishor Meena, Aston University, UK
● Dr Nand Kishor Gupta, Govt. Engg. College, Ajmer, India
Organising Committees:
Finance Committee
● Mr Arvind Yadav, GLA University, Mathura, India
● Mr Ravi Shankar Tiwari, GLA University, Mathura, India
Publicity Committee
● Mr Sachin Goyal, GLA University, Mathura, India
● Mr Indresh Yadav, GLA University, Mathura, India
● Ms Akanksha Shukla, GLA University, Mathura, India
● Mr Ram Naresh Mishra, GLA University, Mathura
Website & Media Committee
● Mr Mayak Goyal, GLA University, Mathura, India
● Mr Deepak Bharti, Student Volunteer, GLA University, Mathura, India
● Mr Ganesh, Student Volunteer, GLA University, Mathura, India
● Mr Saksham Johri, Student Volunteer, GLA University, Mathura, India
Invitation & Registration Committee
● Ms Mohini Yadav, GLA University, Mathura, India
● Mr Gaurav Gupta, GLA University, Mathura, India
● Ms Kanchan Yadav, Student Volunteer, GLA University, Mathura, India
● Mr Krishna Kant, Student Volunteer, GLA University, Mathura, India
● Mr Atul, Student Volunteer,GLA University, Mathura, India
Hospitality & Transport Committee
● Mr Mukesh Pushkarna, GLA University, Mathura, India
● Mr Vinay Dwivedi, GLA University, Mathura, India
● Mr Vikas Kumar, GLA University, Mathura, India
● Mr Prashant Prakash, GLA University, Mathura, India
parc2020@gla.ac.in
