AIMTDR 2018: 7th International & 28th All India Manufacturing Technology, Design and Research Conference 2018 College of Engineering Guindy Chennai, India, December 13-15, 2018 |
Conference website | http://aimtdr2018.com/ |
Abstract registration deadline | May 31, 2018 |
Submission deadline | August 15, 2018 |
AIMTDR 2018
The major contribution towards Indian economy is from the design and manufacturing activities. Innovation considered to be crucial should be properly natured, delivered, protected and shared. In this scenario, to showcase the achievements and innovations, eminent personalities in the field of design and manufacturing participate in the high-quality research conference, ‘All India Manufacturing Technology Design and Research (AIMTDR) Conference’. This conference is considered globally as one of the most prestigious conferences and held once in two years. It was started in 1967 at a national level at Jadavpur University, Kolkata and achieved the International status in the year 2006.
The AIMTDR conferences continue to be a platform for intensive networking and fruitful interaction wherein the technocrats, academicians, researchers, practicing engineers, entrepreneurs, corporate executives, industrialists, start-up professionals, and budding engineers exchange their ideas and share their experiences. The 7th International & 28th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2018) is being organized by three departments namely Department of Manufacturing Engineering, Department of Mechanical Engineering and Department of Production Technology of Anna University, Chennai during 13th -15th December 2018.
Submission Guidelines
All papers must be original and not simultaneously submitted to another journal or conference. The following paper categories are welcome:
- Full papers
- Posters
List of Topics
- Additive Manufacturing
- Advanced Machining Technology
- Sustainable Manufacturing
- Manufacturing Automation
- Material Processing
- Metal Cutting
- Metrology and Quality Control
- Micro and Nano Manufacturing
- Optimization
- Modeling and Simulation Reliability
- Smart Manufacturing
- Surface Engineering
- World Class Manufacturing
- Industry 4.0
Committees
Program Committee
Prof. Amitabha Ghosh, BESU
Prof. V. K. Jain, IIT Kanpur
Prof. B. B. Ahuja, Government College of Engineering, Pune
Prof. Bijoy Bhattacharyya, Jadavpur University, Kolkata
Prof. S. G. Deshmukh, IIT & M, Gwalior
Shri. N. K. Dhand, MD, ACE Micromatic, Bangalore
Prof. U. S. Dixit, IIT Guwahati, Guwahati
Prof. P. K. Jain, IIT Roorkee, Roorkee
Shri. M. Lakshminarayan,
WABCO (India) Ltd.
Prof. G. K. Lal, IIT, Kanpur
Prof. N. K. Mehta, IIT Roorkee
Prof. P. V. Mohanram, PSG Institute of Tech.
Dr. T. Mukherjee, TATA Steel Ltd., Jamshedpur
Shri. P. Muralidharan, LUCAS – TVS Ltd., Vellore
Prof. S. Narayanan, VIT University, Vellore
Prof. S. S. Pande, IIT Bombay, Mumbai
Dr. D. R. Prasad Raju, MVGREC
Prof. P. Radhakrishnan, PSG Institute of Advanced Studies, Coimbatore
Prof. V. Radhakrishnan, IISST, Trivandrum
Prof. N. Ramaswamy, Chennai
Shri. C. P. Rangachar, Yuken India Ltd., Bangalore
Dr. B. R. Sathyan, CMTI, Bangalore
Prof. T. Selvaraj, NIT Trichy,
Prof. H. S. Shan, Chandigarh
Prof. M.S. Shanmugam, IIT Madras
Shri. S. G. Shirgurkar, ACE Designers Ltd., Bangalore
Dr. V. Sumantran,
Celeris Technologies
Dr. V. K. Suri, BARC, Mumbai
Shri. P. Venu Gopalan, DRDL, Kanchanbagh, Hyderabad
Prof. Vinod Yadav, Motilal Nehru Net. Inst. of Tech., Allahabad
Prof. B. Satyanarayan, Visakhapatnam
Shri. P. Mohanram, IMTMA, Bangalore
Prof. N. Ramesh Babu, IIT Madras
Prof. P. V. Rao, IIT Delhi
Prof. Jose Mathew, NIT Calicut
Mr. Niraj Sinha, Sci. ‘G’ PSA to GOI
Dr. Santhosh Kumar, IIT, BHU
Organizing committee
Patron : Vice-Chancellor
Co-Patrons : Registrar
Deans (CEG and MIT)
Chairman, Faculty of Mechanical Engineering
Organizing Departments : (i) Department of Manufacturing Engineering
(ii) Department of Mechanical Engineering
(iii) Department of Production Technology
Chairman : Prof. Dr. S. Gowri
Co-Chairman : (i) HoD, Department of Manufacturing Engineering
(ii) HoD, Department of Mechanical Engineering
(iii) HoD, Department of Production Technology
Organizing Secretary : Prof. Dr. M. Kantha babu
Joint Organizing Secretaries : Dr. Pradeep Kumar and Dr. A. Siddharthan
Treasurer : Prof. Dr. P. Hariharan
Venue
The conference will be held in
College of Engineering Guindy,
Anna University,
Chennai 600 025,
India
Contact
All questions about submissions should be emailed to
Prof. Dr. M. Kantha babu,
Organising Secretary – AIMTDR 2018,
Department of Manufacturing Engineering,
Anna University,
Chennai 600 025, India.
Telephone: +91-44-2235 7715/7718
Email: aimtdr2018@annauniv.edu; aimtdr2018@gmail.com