ICARAE2021: International Conference on Applied Research and Engineering |
Website | https://icarae.weebly.com/ |
Abstract registration deadline | November 28, 2021 |
Submission deadline | November 28, 2021 |
The whole world is faced with problems which are mainly common. In some parts of the world, some of those problems were already solved and some are still in the process to be solved. This then suggests that there is a need for the platform where these solutions can be shared amongst researchers from different parts of the world. The International Conference on Applied Research and Engineering (ICARAE2021) is aimed at bringing researchers from different parts of the world to share their research findings that are relevant to different kinds of problems and also share new technologies being developed in various fields. The objective of this conference is to bring together the professional engineers, technologists, academics, researchers, and postgraduate students to share their research findings in various fields of Science (or Material Science) and Engineering. This conference will be held in Cape Town, South Africa during 26-28 November 2021.
Submission Guidelines
All papers must be original and not simultaneously submitted to another journal or conference. The submitted paper must be in the following format:
- Typescript: Papers must be written clearly and concisely in English. They should be typed (double spaced) with ample margins on all sides on white bond paper (290×215 mm). The abstract, tables, figure captions and the list of references should be typed on separate sheets. All sheets should be numbered consecutively.
- The title Page — The title should be short, specific and be useful in indexing and information retrieval. The byline should give initials and names of the authors and the name and address of the institution where the work was done. The permanent, or present, address of the authors, if different from the address given in the byline, may be given in a footnote. Authors should suggest a short running title, if the title is very long.
- Abstract — The abstract should indicate the scope of the work and the principal findings of the paper. It should not exceed 200 words. The abstract should be informative and be in such form as to be used by abstracting periodicals without modification.
- Data — Only such primary data as are essential for understanding the discussion and the main conclusions emerging from the study should be included. All such secondary data as are of interest to a specific category of readership may, if necessary, be deposited in the editorial office (or retained by the authors) for supply on demand. A footnote to the effect may be inserted at a suitable place in the paper..
- Tables — Tables should be typed on separate sheets of paper without any text matter on the page. They should be numbered consecutively in Arabic numerals and should bear brief titles. Column headings should be brief. Units of measurement should be abbreviated and placed below the headings. Nil results should be indicated and distinguished clearly from absence of data. The same set of data should not be represented both by tables and by figures. Inclusion of structural formulae inside the tables should be avoided as far as possible. Tables should be referred to in the text by number and not by terms like ‘above’, ‘below’, ‘preceding’ or ‘following’.
- Illustrations — All illustrations must be numbered consecutively in Arabic numerals. Captions and legends to the figures should be self-explanatory and should be typed on a separate sheet of paper and attached at the end of the manuscript. Line drawings should be made with Indian ink on white drawing paper (preferably Bristol board), cellophane sheet or tracing cloth. Free-hand drawing is discouraged. Authors are advised to use standard drawings kits, stencil sets, etc. In addition to the originals, two sets of blueprints or Photostat copies should be sent. For satisfactory results in reproduction, the graphs and line drawings should be drawn to approximately twice the size be printed. The size of letters, numerals, dots, lines, etc. should be sufficiently large to permit reduction to double column or single column size as required in the journal without loss of details. In the case of photographs, prints must be on glossy paper and contrasty. If an illustration is taken from another publication, reference to the source should be given and prior permission secured. Illustrations should be covered by thick cardboard to protect them from creases, folds and broken corners during transit. Figures should be referred to in the text by numbers and not by terms like ‘above’, ‘below’, ‘preceding’ or ‘following’.
- Structural Formulae — The number of structural formulae should be restricted to the bare minimum. Wherever the purpose is adequately served, chemical or common names should be preferred. Structural formulae should be numbered in sequence and referred to in the text by their numbers. Reaction schemes should be numbered as schemes or charts and should be referred to in the text as ‘Scheme 1’ or ‘Chart’, etc., and not by expressions like ‘below’, ‘above’, ‘preceding’ or ‘following’.
- References — References to literature, numbered consecutively, must be placed at the end of the paper. In the text, they should be indicated by superscript numbers in sequence. Reference to a research paper, should carry names and initials of authors followed, in order, by the title of the periodical in the abbreviated from (italics), the volume number, the year within circular brackets and the page no. [e.g. Singh S N & Seshadri V, Indian J Eng Mater Sci, 13 (2006) 477-483]. For names of periodicals, the standard abbreviations listed in the International Serials Catalogue (ICSU-AB) should be used. If a paper has been accepted for publication, the name of the authors and the journal should be given followed by the words “in press” within circular brackets. [e.g. Gowda B H L, Indian J Eng Mater Sci, (in press)]. Reference to a book should include, in the following order: names and initials of authors, the title of the book (italics), name of publisher and place of publication within circular brackets, and year [e.g., Ross P J, Taguchi techniques for quality engineering (McGraw-Hill Book Company, Singapore), 1998 If the reference is to the work of an author or edited by a different person, the fact that it is cited from the source book should be clearly indicated [e.g, Okamura K, Sato M, Seguchi T & Kawanishi S, in Controlled interphase in composite materials, edited by Ishida M (Elsevier Science Publishers, New York), 2003, 209]. Proceedings of conferences and symposia should be treated in the same manner as books. Reference to a paper presented at a conference, the proceedings of which are not published, should include, in the following order, names and initials of authors, title of the paper (italics), name of the conference, place where the conference was held, and date [e.g., Kurkjian C R & Inniss D, Strength and fatigue of silica, paper presented at International Conference on Physics of Non-crystalline, Cambridge, UK, 2002]. Reference to a thesis should include the name of the author, title of thesis (italics), university or institution to which it was submitted and year of submission [e.g., Verma A K, Study on high concentration fly ash slurry disposal through pipeline, Ph.D. Thesis, Indian Institute of Technology, New Delhi, 2004]. Reference to a patent should include names of patentees, county of origin (italics) and patent number, the organization to which the patent has been assigned within circular brackets, data of acceptance of the patent and reference to an abstracting periodical where available [e.g., Kennedy J P & Faust R, US Pat. 4,910, 321 (to the University of Akron), 2000]. Unpublished papers and personal communications should not be listed under references but should be indicated in the text, e.g. (Pande, A B, unpublished work/data); (Pande, A B, personal communication).
- Mathematical Material — Equations must be clearly written, each on its own line, well away from the text. All equations must be numbered consecutively in Arabic numerals with the number in parentheses near the right-hand margin. Indices or superscripts must be indicated in pencil with a ∨ sign and subscripts with a ∧ sign, ‘oh’ and ‘zero’, k, and kappa, ‘ell’ and one, etc., must be clearly distinguished. For example, the following scheme of underlining in colour may be used blue for Greek, red for German (gothic), green for script and brown for bold-face. Authors must indicate wherever special characters (Greek, German, Script, Vector, Tensor, matrix, etc.) are required. Vectors must be underlined by a wavy line and tensors by two wavy lines. The SI system of units and symbols is recommended.
Program Committee
- Dr. Shankar Sehgal, Associate Professor, UIET, Panjab University, Chandigarh
- Dr Velaphi Msomi, Mechanical Engineering Department,Cape Peninsula University of Technology, South Africa
- Dr Kuldeep K Saxena, Associate Professor, Department of Mechanical Engineering, GLA University, Mathura, India
Organizing committee
- Prof. Ali Merdji, Mascara University, Algeria
- Mrs Sipokazi Mabuwa, Cape Peninsula University of Technology, South Africa
- Ms Nandipha Pangwa, Cape Peninsula University of Technology, South Africa
Publication
Selected papers from ICARAE2021 will be recommonded to publish in Indian Journal of Engineering and Materials Sciences (IJEMS), SCIE, IF 0.88.
Contact
All questions about submissions should be emailed to icarae2021@gmail.com