NCAME - 2019: Ist National Conference on Advances in Mechanical Engineering - 2019 Delhi Delhi, India, March 16, 2019 |
Submission link | https://easychair.org/conferences/?conf=ncame2019 |
Submission deadline | January 10, 2019 |
It gives me immense pleasure to share with you that the Department of Mechanical Engineering, National Institute of Technology Delhi (NITD) (an autonomous institute under the aegis of MHRD, Govt of India and an institute of national importance) is organizing Ist National Conference on Advances in Mechanical Engineering (NCAME) - 2019 on March 16, 2019.
The conference aims to discuss different areas of mechanical engineering from design to manufacturing. It attempts to report the recent developments in aforementioned areas by providing a fascinating overview of the state of the art in the field in India, which will be of interest to a wide readership. A broad range of topics and issues in modern engineering will be discussed including (but not limited to) CAD/CAM, additive manufacturing, materials science and engineering, simulation and modeling, finite element analysis, applied mechanics etc.
In addition, few articles will be invited for submission of extended version for consideration for publication in the journal FME Transactions (ECSI indexed). Organizers are planning to have publication of special issues from the recommended articles of the conference after extension and peer review in different SCI / ESCI indexed journals as per journal policy.
Submission Guidelines
All papers must be original and not simultaneously submitted to another journal or conference. The following paper categories are welcome:
- Full papers describing recent developments in the areas of Mechanical Engineering and Allied Engineering including Instrumentation are welcome for oral presentation and poster presentation. The papers submitted need to be atleast 2500 words and will be subjected to peer review, plagiarism / quality checks and registration by atleast one of the authors before inclusion in the conference proceeding. Without registration, No paper will be included in proceeding / journals.
- The manuscript should be written in Times New Roman Font (size 12) and single line spacing with suitable citation of figures and tables along with References. Margin of the paper may be set 2.54 cm on each side. Author's name, affiliation and E-mail need to be mentioned clearly.
- Peer reviewed manuscripts need to be formatted as per journal style depending upon the recommendation of the conference committee.
- The organizers have collaboration with several international journals for publication of conference proceeding as a special issue.
- Decision of the organizers will be final and binding.
List of Topics (but not limited to)
- Artificial intelligence applied, optimization methods
- Automation and control
- Composites, ceramics, polymers / processing
- Computational mechanics / FEM modelling and simulation
- Computer-based manufacturing technologies: CNC, CAD, CAM, FMS, CIM
- Design and manufacture, medical device manufacturing
- Friction and wear of materials, corrosion resistance
- Heat treatments, microstructure and materials properties
- Instrumentation and measurement
- Joining and fracture mechanics
- Lubricants and lubrication
- Machinability and formability of materials
- Finite Element Analysis
- Fluid Mechanics, Combustion, and Engineering Physics
- Heat and Mass Transfer
- Instrumentation and Control Engineering
- Laser Material Interactions
- Machine Design and Analysis
- Materials and Failure Analysis
- Materials Synthesis and Processing
- Operations Research
- Production Planning and Control
- Project Management
- Quality Control and Management
- Reliability and Maintenance Engineering
- Safety, Security and Risk Management
- Service Innovation and Management
- Supply Chain Management
- Decision Making
- Systems Modeling and Simulation
- Technology and Knowledge Management
- Rapid manufacturing technologies and prototyping, remanufacturing
- Recycling, materials and industrial wastes, products and recycling systems
- Renewable energies technology
- Solid mechanics and structural mechanics
- Sustainable and green manufacturing
- Thermodynamics and heat transfer
- Tribology and surface engineering
- Vibration and acoustics
- Automobile Engineering
- Applied Mechanics
- Human Vibration
- Ergonomics
- Nuclear Engineering
- Biomechanics
- Biomedical Instrumentation
- Mathematical Modelling
- Optimization Techniques
- Nanotechnology
- Sensors and Transducers
- Metrology
- Uncertainty of measurement
- Other research related to Mechanical Engineering etc.
Registration Details
- Industry Expert / R&D Rs. 5000
- Faculty Rs. 4000
- Research Scholar Rs. 3000
- Student (UG/PG) Rs. 2500
- Participant (Without Paper) Rs. 2000
- Additional paper (R&D, Faculty) Rs. 3000
- Additional Paper (Research scholar / UG-PG student) Rs. 2000
Payment of Registration Fee:
a. Demand Draft:
in favour of “Director, NIT Delhi Endowment fund” Payable at New Delhi.
b. NEFT:
A/c No: 2938101008010; IFSC: CNRB0002983; Beneficiary: Director, NIT Delhi Endowment Fund; Bank: Canara Bank
Important Dates:
a. Date of submission starts: 08.11.2018
b. date of submission ends: 10.01.2019
c. Reviews of paper to authors from : 05.01.2019
d. Revised and CRC paper: 25.01.2019
e. Date of submission of copyright: 25.01.2019
f. Last date of Registration fee payment: 31.01.2019
Committeesational Advisory Committee
- Sh. Sushil Kumar, National Institute of Technology Delhi
- Dr. Vivek Shrivastava, National Institute of Technology Delhi
- Prof. Pradeep Kumar, Indian Institute of Technology Roorkee
- Prof. B P Patel, Indian Institute of Technology Delhi
- Prof. A K Darpe, Indian Institute of Technology Delhi
- Prof. N Sahoo, Indian Institute of Technology Guwahati
Organizing committee
- Prof. Praveen Kumar, Hon. Director, National Institute of Technology Delhi
- Dr. Harish Kumar, National Institute of Technology Delhi
- Dr. V S Pandey, National Institute of Technology Delhi
- Dr. D Vaithiyanathan, National Institute of Technology Delhi
- Dr. Shrutidhara Sarma, National Institute of Technology Delhi
- Dr. Abhishek Mishra, National Institute of Technology Delhi
- Dr. Servesh Agnihotri, National Institute of Technology Delhi
Venue
The conference will be held in National Institute of Technology Delhi.
Contact
All questions about submissions and conference should be emailed to
Dr. Harish Kumar, Department of Mechanical Engineering, National Institute of Technology Delhi, India
E-mail: ncame2019@nitdelhi.ac.in