CFP
ICMM 2018: The 2018 9th International Conference on Mechatronics and Manufacturing Phuket Island, Thailand, January 27-29, 2018 |
Conference website | http://icmm.org/ |
Submission link | https://easychair.org/conferences/?conf=icmm2018 |
Submission deadline | November 25, 2017 |
The 2018 9th International Conference on Mechatronics and Manufacturing (ICMM 2018) will be held in Phuket, Thailand during Jan 27-29, 2018. This conference will provide a remarkable opportunity for the academic and industrial communities to address new challenges and share solutions, and discuss future research directions. Contributions are expected from academia, industry, and management agencies.
Submission Guidelines
- Papers for publication must be submitted in fulll paper electronically via http://www.easychair.org/conferences/?conf=icmm2018
- Papers for presentation only must be submitted by abstract to icmm@asr.org.
List of Topics
- (T1) Materials Science and Engineering
Metallic Alloys, Tool Materials, Superplastic Materials, Ceramics and Glasses, Composites, Amorphous Materials, Nanomaterials, Biomaterials, Multifunctional Materials, Smart Materials, Engineering Polymers, Functional materials, Nuclear fuel materials, Biomaterals, sensors and surfaces, Thin Film Chalcogenide Photovoltaic Materials, Nuclear Materials, Magnetic Materials, Multi Functional Magnetic Materials, Superconducting Materials, Structured Materials, Spintronics Materials and Devices, Hard/Soft Magnetic Materials, Crosscutting materials
(T2) Materials Properties, Measuring Methods and Applications
Ductility, Crack Resistance, Fatigue, Creep-resistance, Fracture Mechanics, Mechanical Properties, Electrical Properties, and Magnetic Properties, Corrosion, Erosion, Wear Resistance, Non-Destructive Testing, Reliability Assessment, Toxicity, Working Properties of Materials and Products, Large Scale Applications, Electronics Applications
(T3) Methodology of Research and Analysis and Modelling
Electron Microscopy, X-ray Phase Analysis, Metallography, Quantitative Metallography, Image Analysis, Computer Assistance in the Engineering Tasks and Scientific Research, Numerical Techniques, Statistic Methods, Residual Life Analysis, Process Systems Design, Mould Flow Analysis, Rapid Prototyping, CAM, CAMS, CAQ, Engineering Design, Technological Design, Materials Design, Computational Material Science, Materials and Engineering Databases, Expert Systems, Artificial Intelligence Methods
(T4) Materials Manufacturing and Processing
Casting, Powder Metallurgy, Welding, Sintering, Heat Treatment, Thermo-Chemical Treatment, Thin & Thick Coatings, Surface Treatment, Machining, Plastic Forming, Quality Assessment, Automation Engineering Processes, Robotics, Mechatronics, Technological Devices and Equipment, Theoretical Fundamentals of Cleaner Production, Industrial Application of Cleaner Production Methods, Production and Operations Management, Production Planning and Control, Manufacturing Technology Management, Quality Management, Environmental Management, Safety and Health Management, Project Management, Physical Distribution and Logistics Management, Supply Chain Management, Productivity and Performance Management, Modeling, analysis and simulation of manufacturing processes, High-speed/precision machining, Virtual manufacturing and concurrent engineering, Green design and manufacturing, Digital and agile manufacturing, PDM, ERP, logistics and supply chain, Bionic mechanisms and bio-manufacturing, Tribology in Manufacturing Processes, Integrated Manufacturing System, Laser Processing Technology, Materials Machining, Micro- and nano-fabrication, materials processing and technology, Thermal Engineering Theory and Applications, Testing, measuring, monitoring and controlling of manufacturing processes, Engineering Optimization, Product Design and Development,Project/Engineering Management
(T5) MEMS, NANO, and Smart Systems-on-Chip
Nanoelectronics, Spintronic Devices and Systems, Smart Sensor Technology and Measurement Systems, Electroactive Polymer Actuators and Devices, Damping and Isolation , Micro-fluidic Systems, Nano-imaging, Scanning Probes, and Molecular Manipulation and Devices, Active Materials: Behaviour and Mechanics, Industrial and Commercial Applications of Smart Structure Technologies, Smart Electronics, MEMS, and BioMEMS, Smart Structures and Integrated Systems, Nano-optics and Nano-photonic Devices, Novel Fabrication Processes, Laser Micromachining and Nanomachining, Nano-composites, Bio-electronics, Bionanotechnology, and Molecular Nanotechnology
Committees
Conference Chair
- Prof. Yoshihiko Uematsu,Gifu University, Japan
Program Chair
- Prof. Vadim R. Gasiyarov, South Ural State University, Russia
Technical Committee
- Prof. Dong-Won Jung, Jeju national University, Republic of Korea
- Prof. Osman Adiguzel, Firat University, Turkey
- Prof. Yusri Yusof, Universiti Tun Hussein Onn Malaysia (UTHM) , Malaysia
- Prof. Hamid Reza Karimi, Polytechnic University of Milan, Italy
- Prof. Shi Yuliang, Beijing University of Technology, China
- Prof. Prakash.S, Sathyabama University, India
- Prof. N.ETHIRAJ, Dr. M.G.R Educational and Research Institute, Chennai, India
- Assoc.Prof. Shih-Chuan Yeh, De Lin Institute of Technology, Taiwan
- ...
Invited Speakers
- Prof. Dong-Won Jung, Jeju national University, Republic of Korea
- Assoc. Prof. RATCHATIN CHANCHAROEN, Chulalongkorn University, Thailand
- Prof. Prakash.S, Sathyabama University, India
- Prof. Yusri Yusof, Universiti Tun Hussein Onn Malaysia (UTHM) , Malaysia
Publication
All the accepted papers will be published into IOP Conference Series: Materials Science and Engineering (doi:10.1088 / ISSN.1757-899X), which is indexed by EI Compendex, Scopus, Thomson Reuters (WoS), Inspec,et al.
Contact
Ms. Jenny Chow
Conference Secretary
Email: icmm@asr.org
Tel: +1-617-229-6820