AIAMMS-2023: 1st International Conference on Artificial Intelligence, Advanced Materials, and Mechatronics Systems JECRC University, Jaipur, Rajasthan, India Jaipur, India, October 6-7, 2023

The International Conference on “Artificial Intelligence, Advanced Materials and Mechatronics (AIAMMS 2023)" focuses on promoting Interdisciplinary research-based advancements in Artificial Intelligence, Materials and Mechatronics. It would be an excellent opportunity for Academicians, Researchers, Technocrats, and Students to present their new and innovative research findings in the fields of Emerging Artificial Intelligence, Advanced Materials, Mechatronics, Engineering Issues, and Challenges for Industrial Applications. This conference will also discuss the impact of robotics, augmented reality, and IoT on value chain support and optimization, Artificial Intelligence in the Manufacturing Sector, Industry 4.0, Advanced Optimization Techniques, Sustainable Environmental Materials, Non-Destructive Evaluation Techniques, Sustainable Technology Innovation, Performance Optimization, Energy & Environmental Materials.

Submission Guidelines

• Authors with original unpublished research work and novelties in the track fields of conference are invited from all over the globe.
• Title of paper, Abstract, Keywords, Author's affiliation and Author's email address should be mentioned clearly.
• The abstract should not exceed 250 words.
• Figures in image format should be of minimum 400 dpi.
• Line art figures in Image format should be of minimum 600 dpi.
• Contents of papers presented should lie within the general scope of conference.
• Full length original research contributions and review articles not exceeding 18 pages in the single column format should be submitted with 1.5 line spacing. Literature review / survey papers should present a totally new vision in the respective field or at least it should benefit the field with new perspective if they have to be published.
• All Submitted papers will go through a “Plagiarism & Similarity test” by Turnitin Software.
• Papers with 10% similarity score will be examined and those that are deemed unacceptable will face rejection/withdrawal without a formal review.
• Paper size should be in European A4.
• Margins should be 2.5CM (Top and Bottom) and 2.5cm (Left and Right).
• There should be no page numbers, or headers and footers, within the paper.
• The paper should be submitted in .pdf format without any password protection.
• The .pdf file format should be free from formatting errors (e.g. corrupt equations, missing or low-resolution figures), since conversion from Word to PDF can introduce formatting errors.
• All pages should be portrait.
• Figures should be placed within the text and should not be collected at the end of the document.
• A thorough proofread should be conducted to check the standard of english and be ensured that wordings are clear and concise.
• Ensure that all permissions have been obtained for any material within the manuscript, which is not from the submitted original work, or from previously published work.
• Reference list should be checked for accuracy. References can only be linked via Crossref if they are correct and complete.
• Authors are advised to follow APA style of reference citation.
• All the references given in the list of references should be cited in the body of a text.
• The Citation should be given by number, whether sequential by order of citation or according to the sequence in an alphabetized list (For Example):
  • Single citation: [9].
  • Multiple citation: [4–6, 9]. The citations should be in numerical order.
  • Sequential citation by order of citation: reference 7 cannot be cited before reference 5.

  AIAMMS-2023 is actively monitoring the COVID-19 situation to ensure the safety, comfort and quality of experience for attendees and a successful conduct of the event.

  AIAMMS-2023 is committed to holding the conference in 2023 and authors of the accepted papers who are unable to attend the conference in person will be given an option to present their papers online and attend the conference virtually.

List of Topics

Artificial Intelligence (AI)

• AI-Based NLP
• Agents and Multi-agent systems
• AI in Smart Health Care
• AI in Food Processing
• AI in Wearable Medical Devices
• Self-Aware AI
• AI in Reactive Machines
• AI in Dynamic Power Scheduling
• AI in Economy Prediction
• AI in the Industrial Internet of Things (IIOT)
• AI-Algorithms & Tools
• Machine learning and artificial intelligence in the field of medicine
• Machine Learning Algorithms
• Computer Vision
• Supervised Machine Learning
• Unsupervised Machine Learning
• Deep Learning
• Neural Networks
• Reinforcement Learning
• Predictive Learning
• Computational Learning Theory
• Adversarial Machine Learning
• Quantum Machine Learning
• Robot Learning
• Meta-Learning
• Applications of ML
• DL in Automatic Speech Recognition
• DL for Image Recognition
• DL for Natural Language Processing
• DL in Toxicology
• DL for Customer Relationship Management
• DL in Bioinformatics
• DL in Mobile Advertising
• Artificial intelligence governance
• DL in building intelligent systems
• IoT in artificial intelligence
• Ensemble Forecasting Algorithms
• Web Intelligence Applications and Cyber-security
• Automated reasoning and inference
• Pervasive Computing and Ambient Intelligence
• Evolutionary Computing
• Heuristic and AI Planning Strategies and Tools
• Fuzzy Logic in AI Systems
• Hybrid Intelligent Systems
• Industrial Applications of AI
• Uncertainty in AI
• AI Optimized Hardware
• Ethical AI
• Advancement of AI systems
• Data Mining and Machine Learning Tools
• Efficient model training, Inference, and Serving
• Privacy and security for ML applications
• ML programming models and abstractions
• Hardware-efficient ML
• Emerging practices in ML
• Cybernetics
• Model-Based Reasoning
• Neural Network
• Digital Twin
• Intelligent Augmented Reality and Virtual Reality
• Big Data Analytics
• Intelligent Blockchain techniques

• Advanced Manufacturing & Bio-Medical Engineering

• 3D / 4D / 5D Printing
• Operations Research and Soft Computing
• Quality and Applied Statistics
• Industry 4.0 and 5.0
• Manufacturing Automation and e-Business,
• Industrial Technology and Management,
• Product Lifecycle Management,
• Production and Operations Management
• CAD/ CAM/ CAPP/ CIM
• Computer Numerical Control (CNC)
• Cyber-Physical Production Systems
• Cyber Security in Manufacturing
• Digital Manufacturing
• Ergonomics in Production
• Cellular Manufacturing
• Agile Manufacturing
• Modern Manufacturing Processes
• Incremental Sheet Forming
• Advanced Forming Techniques
• Advanced Joining Techniques
• Green Welding Technology
• Automation in Welding and Fabrication
• Advance Measurement and Metrology
• Hybrid optimization tools
• Nano-Medicine
• Tissue Engineering
• Quantum Photonics
• Artificial Dimensions
• Biomechanics and Health Engineering
• Medical Imaging Technology and Application
• Bioinformatics
• Computational & Molecular Biology
• Surgical Technology
• Bio-manufacturing
• 3D Bio-printing
• Bioelectrical Engineering
• Muscle/neuromuscular/musculoskeletal mechanics and engineering
• Neuronic Antennas

• Advanced Materials

• Optical Materials and Plasmonics Spintronics
• Carbon Nanostructures and Graphene
• Optoelectronics
• Microstructure and Characterization of Materials
• Biomaterials
• Ceramics, Polymer, and Advanced Fiber Composites
• Nanoparticle and Nano-scale Research
• Biomedical Nanotechnology
• Nano-metrology and Instrumentation
• Electronic and Magnetic materials
• Functional Materials
• Aerospace Materials
• Smart Materials
• Photonic Material
• Ultrafast Material
• Bioinspired Materials

• Mechatronics

• Automotive Mechatronics
• Advanced Motion Control
• Mechatronics in Energy Systems
• Micro and Nano Mechatronics
• Biomechatronics
• Intelligent Control and AI in Mechatronics
• Process Control & Instrumentation
• Sensor Networks, Networked Control
• Opt Mechatronics
• Factory Modeling and Automation
• Sensors and actuators design and data collection approaches
• Model-based mechatronic system design
• Computational intelligence in mechatronic systems
• Mechatronics systems synthesis, analysis, and design
• Ocean Mechatronics
• Intelligent Mechatronics
• Ambient Assisted Living
• Personalized and Automated Transportation, Electric Vehicles
• Cyber-Physical Systems
• Real-time Systems
• Automated Guided Vehicles
• Process Automation
• Man-machine Interactions
• Agents and Multi-agent Systems

• Robotics and Automation

• Robot Design
• Robotic Grasping and Manipulation
• Automated Mining
• Ubiquitous Robots and Devices,
• Mobile Industrial Robots
• Environmental Interaction and Navigation
• Robot Intelligence and Learning
• Humanoid Robots
• Marine Robots
• Medical Robotics
• Micro & Nano-robotics
• Neuro-Robotics
• Robots in Defense
• Cloud Robotics
• Cognitive Robotics
• Drone Technology
• Underwater Robotics
• Automation Instruments
• Manufacturing Automation.
• Manipulation and Locomotion
• Dynamics and Kinematics
• Industrial Applications of Automation
• Intelligent and collaborative robots

Committees

INTERNATIONAL ADVISORY COMMITTEE

• Dr. Yang Liu, Senior Associate Professor, Department of Management and Engineering, Linköping University, Sweden.
• Prof. Vijayakumar B., Professor, Birla Institute of Technology & Science Pilani, Dubai
• Dr. Hansraj Bangar, Scientist, Amazon, Ohio, USA.
• Dr. Santosh Kumar, Research Professor – Konkuk University, Seoul, S. Korea.
• Dr. Lailesh Kumar, Senior Research Scientist, Pinetree PosMagnesium Co. Ltd., (Earlier Posco Magnesium Strip Plant), Suncheon-Si, Jeollanam-do, S. Korea.
• Prof. Periasamy C., Birla Institute of Technology & Science Pilani, Dubai Campus, Dubai, UAE.
• Dr. Deepak Dahiya, Professor of Computer Science and Information Systems, College of Computer and Information Sciences (CCIS), Majmaah University, Kingdom of Saudi Arabia.
• Dr. Surbhi Bhatia, King Faisal University, Saudi Arabia.
• Prof. Udayakumar R, Birla Institute of Technology & Science Pilani, Dubai Campus, Dubai, UAE.
• Dr. Sumit chakrabarty, Assistant Professor, Electrical Engineering, Kennesaw State University, USA.
• Dr. Mehedi Masud, Professor,Taif University, Kingdom of Saudi Arabia.

NATIONAL ADVISORY COMMITTEE

• Prof. K. K. Aggarwal, Former VC, GGS Indraprastha University, New Delhi, Chairman, National Board of Accreditation, New Delhi.
• Prof. R K Mittal, Senior Professor [Ex.], Department of Mechanical Engineering, BITS, Pilani, Rajasthan.
• Prof. Abid Haleem, Professor, Department of Mechanical Engineering, Jamia Millia Islamia, New Delhi.
• Prof. Pradeep Kumar, Professor, Department of Mechan ical & Industrial Engineering, IIT Roorkee, Roorkee, Uttarakhand.
• Prof. Shatendra K. Sharma, Professor, University Science Instrumentation Centre (USIC) Jawaharlal Nehru University, New Delhi.
• Prof. Hari Singh, Professor, Department of Mechanical Engineering, National Institute of Technology, Kurukshetra, Haryana.
• Prof. Puneet Tandon, Professor, Department of Mechanical Engineering, Indian Institute of Information Technology, Design and Manufacturing, Jabalpur, Madhya Pradesh.
• Prof. Morapakala Srinivas, Birla Institute of Technology & Science Pilani (BITS Pilani), Hyderabad Campus, Hyderabad.
• Prof. Srinivasa Prakash Regalla, Associate Professor, Department of Mechanical Engineering,Birla Institute of Technology & Science Pilani (BITS Pilani), Hyderabad Campus, Hyderabad.
• Prof. Sandeep Grover, Professor, Department of Mechanical Engineering, J.C. Bose University of Science and Technology, YMCA, Faridabad, Haryana.
• Prof. Bijay Kumar Rout, Professor, Department of Mechanical Engineering, Birla Institute of Technology & Science Pilani (BITS Pilani), Pilani, Rajasthan.
• Prof. Amit Pal, Professor, Department of Mechanical Engineering, Delhi Technological University, New Delhi.
• Prof. Sukhdeep Singh Dhami, Associate Professor, National Institute of Technical Teachers Training and Research, Chandigarh.
• Prof. Vishal Gulati, Professor, Department of Mechanical Engineering, Guru Jambheshwar University of Science and Technology, Hisar, Haryana.
• Prof. Brijesh Kumar, Professor, Department of Computer Science and Engineering, Manav Rachna International Institute of Research and Studies, Faridabad, Haryana.
• Prof. Sanjay Kumar, Professor, Department of Mechanical Engineering, Institute of Technology and Management, New Delhi.
• Dr. Akhilesh Das Gupta, Professor, Department of Electronics and Communication Engineering, Institute of Technology and Management, New Delhi.
• Prof. A. K. Mittal, Professor, Department of Instrumentation and Control Engineering, Netaji Subhash University of Technology, New Delhi.
• Prof. Parvinder Singh, Professor, Department of Computer Science and Engineering, Deenbandhu Chhotu Ram University of Science & Technology, Sonepat, Haryana.
• Prof. Ramesh K Garg, Professor, Department of Mechanical Engineering, Deenbandhu Chhotu Ram University of Science & Technology, Sonepat, Haryana.
• Prof. M.N Hoda, Professor, Department of Computer Science & Director at Bharati Vidyapeeth’s Institute of Computer Application and Management, New Delhi.
• Prof. N.S. Gill, Professor, Department of Computer Science & Applications, Maharishi Dayanand University, Rohtak, Haryana.
• Prof. M.P.S. Bhatia, Professor, Department of Computer Science and Engineering, Netaji Subhash Institute of Technology, New Delhi.
• Prof. J.S. Saini, Professor, Department of Electrical Engineering, Deenbandhu Chhotu Ram University of Science & Technology, Sonepat, Haryana
• Prof. Neeraj Kumar, Professor, Department of Computer Science and Engineering, Thapar Institute of Engineering and Technology, Patiala, Punjab.
• Prof. Sanjay Kajal, Department of Mechanical Engineering, University Institute of Engineering and Technology, Kurukshetra University, Haryana.
• Prof. Kapil Sharma, Professor, Department of Information Technology, Delhi Technological University, New Delhi.
• Dr. Anil Kumar, Associate Professor, Department of Mechanical Engineering, Delhi Technological University, New Delhi.
• Dr. Sanjeev Kumar, Associate Professor, Department of Mechanical Engineering, J.C. Bose University of Science and Technology, YMCA, Faridabad, Haryana.
• Dr. Munish Gupta, Associate Professor, Department of Mechanical Engineering , Guru Jambheshwar University of Science and Technology, Hisar, Haryana.

INDUSTRY ADVISORY COMMITTEE

• Dr. Lailesh Kumar, Senior Research Scientist, Pinetree Pos Magnesium Co. Ltd., (Earlier Posco Magnesium Strip Plant), Suncheon-Si, Jeollanam-do, S. Korea.
• Mr. Khushpal Singh, Director, Geo Solutions, Gurugram.
• Dr. Meenal Borkar, Technical Trainer (Data & ML), Cloud Learning Services, Google Cloud Platform, India.
• Dr. Hemant Jalota, Quantitative Analyst, Equtick India Pvt. Limited, New Delhi, India.
• Mr. Kulbir, Principal Member of Technical Staff, Oracle, Gurugram, India.
• Ms. Seema Pannu, Associate Consultant, Tata Consultancy Service Ltd (TCS), India.
• Mr. Narender Kumar, Sr. Manager, Scan Point Geomatics Limited, Ahmedabad.
• Mr. Pankaj Kataria, Senior Manager, Newgen Software Technologies, New Delhi.
• Dr. Sachin Maheshwari, General Manager, HR, Sage Metals Ltd., New Delhi, India.
• Mr. Rakesh Kumar, Business Head, Sigma Engineering Solution, Jaipur, India.
• Mr. Amit Soman, Managing Partner, AR2 Holding, Michigan, USA.
• Mr. Sandeep Chotia, Group CFO, Sage Metals Ltd., New Delhi, India.
• Mr. Rattan Sharma, President- North Region, Growell Chemical Industries Pvt. Ltd., India.
• Rajesh Goel, Vice President, India Operations, Sage Metals Ltd., India.
• John Pitsowaki, Regional Director, Shaw Development, Indianapols, USA.
• Dr. (Hc) Navnath Ganpat Tarle, Chief Operating Officer and Executive Vice President, Global Autotech Ltd., Pune, India.

PEER REVIEW COMMITTEE

• Prof. D. K. Sharma, Professor and Dean (International Relations & Academic Collaborations), Department of Computer Engineering & Applications, Institute of Engineering & Technology, GLA University, Mathura, Uttar Pradesh.
• Dr. Hadeel Alsolai, College of Computer and Information Sciences, Princess Nourah Bint Abdulrahman University, Saudi Arabia.
• Dr. Mahmoud Othman, Assistant Professor, Department of Computer Science, Future University in Egypt, Egypt.
• Dr. Vikas Mittal, Associate Professor, National Institute of Technology, Kurukshetra, Haryana.
• Dr. Sandeep Rathee, Assistant Professor, Department of Mechanical Engineering, National Institute of Technology, Srinagar, Jammu & Kashmir.
• Dr. Vikash Kumar, Assistant Professor, Department of Mechanical Engineering, National Institute of Technology, Kurukshetra, Haryana.
• Dr. Mohmad Javaid, Assistant Professor, Department of Mechanical Engineering, Jamia Millia Islamia, New Delhi.
• Dr. Jaber Saeed Alhussain Alzahrani, Department of Industrial Engineering, College of Engineering at Alqunfudah, Umm Al-Qura University, Saudi Arabia.
• Dr. Neeraj Mehla, Assistant Professor, Department of Mechanical Engineering, National Institute of Technology, Kurukshetra, Haryana.
• Dr. Mani Kanwar Singh, Skill Assistant Professor, Skill Faculty of Engineering & Technology, Shri Vishwakarma Skill University, Haryana.
• Dr. Neeraj Sharma, Associate Professor, Department of Mechanical Engineering, Maharishi Markandeshwar University, Mullana, Haryana.
• Dr. Puneet Katyal, Assistant Professor, Department of Mechanical Engineering, Guru Jambheshwar University of Science and Technology, Hisar, Haryana.
• Dr. Amitesh Goswami, Workshop Superintendent, Department of Mechanical Engineering, Guru Jambheshwar University of Science and Technology, Hisar, Haryana.
• Dr. Nripendra Narayan Das, Associate Professor, Department of Computer Science Engineering, Manipal University Jaipur, Rajasthan.
• Dr. Vinay Ahlawat, Department of Mechanical Engineering, Ch. Ranbir Singh State Institute Of Engineering and Technology, Government College, Jhajjar, Haryana.
• Dr. Sujata Nayak, Department of Mechanical Engineering, Manav Rachna University, Faridabad, Haryana.
• Dr. Narender Panwar, Department of Mechanical Engineering, Ch. Ranbir Singh State Institute Of Engineering and Technology, Government College, Jhajjar, Haryana.
• Dr. Vikas Goyat, Assistant Professor, Department of Mechanical Engineering, SRM Institute of Science and Technology, Modinagar, Uttar Pradesh.
• Dr. Naveen Sharma, Assistant Professor, Department of Mechanical Engineering, Netaji Subhash Institute of Technology, New Delhi.
• Dr. Mukesh Kumar Sahu, Associate Professor and HOD, Department of Mechanical Engineering, Cambridge Institute of Technology, Ranchi, Jharkhand.
• Dr. Meghna Chhabra, Associate Professor, Faculty of Management Studies, Manav Rachna International Institute of Research and Studies, Faridabad, Haryana.
• Dr. Harish Kumar Banga, Assistant Professor, Department of Mechanical Engineering, Guru Nanak Dev Engineering College, Ludhiana, Punjab.
• Dr. Rohit Tripathi, Assistant Professor,. Department of Electronics Engineering, J.C. Bose University of Science and Technology, YMCA, Faridabad, Haryana.
• Dr. Yugal Kumar, Associate Professor, Department of Computer Science Engineering, Jaypee University of Information Technology, Waknaghat, Solan.
• Dr. Mamta Mittal, Associate Professor, G. B. Pant Government Engineering College, New Delhi.
• Dr. Parneeta Dhaliwal, Professor, Department of Computer Science, Manav Rachna University, Faridabad, Haryana.
• Dr. Poonam Tanwar, Professor, Manav Rachna International Institute of Research and Studies, Faridabad, Haryana.
• Dr. Surjeet Dalal, Department of Computer Science Engineering, SRM University, Sonepat, Haryana.
• Dr. Ram Krishan, Assistant Professor, Department of Computer Science Engineering, Punjabi University Guru Kashi Campus, Talwandi Sabo, Punjab.
• Dr. Anjali Gupta, Department of Civil Engineering, Manav Rachna International Institute of Research and Studies, Faridabad, Haryana.
• Dr. Sachin Gupta, Assistant Professor, Department of Business Administration, Mohanlal Sukhadia University, Udaipur, Rajasthan.
• Dr. Devendra Kumar, Mohanlal Sukhadia University Udaipur, Rajasthan
• Dr. Niranjan Singh Rathee, Jagannath University, Haryana.
• Dr. Rohit Singh Lather, Head of Department of Machenical Engineering,The NorthCap University , Gurgaon, Haryana.
• Dr. Himanshu Manchanda, Department of Mechanical Engineering, Guru Jambheshwar University of Science and Technology, Hisar, Haryana.
• Dr. Jyotsna Sharma, Associate Professor, Amity University Manesar, Gurgaon, Haryana.

ORGANIZING COMMITTEE

CHIEF PATRONS

• Shri O.P. Agarwal, Chancellor, JECRC University, Jaipur, Rajasthan, India.
• Shri Amit Agarwal, Vice-Chairperson, JECRC University, Jaipur, Rajasthan, India.
• Shri Arpit Agarwal, Vice-Chairperson, JECRC University, Jaipur, Rajasthan, India.

PATRONS

• Prof Victor Gambhir, President, JECRC University, Jaipur, Rajasthan, India.

CO-PATRONS

• Prof Ram Rattan, Pro-President, JECRC University, Jaipur, Rajasthan, India.
• Shri S.L. Agarwal, Registrar, JECRC University, Jaipur, Rajasthan, India.
• Sh. Dheemant Agarwal, Director, Digital Strategies, JECRC University, Jaipur, Rajasthan, India.

HONORARY CHAIR

• Prof. Ravi Kant Mittal, Professor (Retired), Department of Mechanical Engineering, BITS Pilani, Rajasthan, India.

GENERAL CHAIRS

• Prof. Naveen Hemrajani, Dean, School of Engineering and Technology, JECRC University, Jaipur, Rajasthan, India.
• Prof. Vivek Anand, Dean academic, JECRC University, Jaipur, Rajasthan, India.

CONFERENCE CHAIR

• Dr. Ajay, Associate Professor, Department of Mechanical Engineering, School of Engineering and Technology, JECRC University, Jaipur, Rajasthan, India

CORE ORGANIZING COMMITTEE

• Dr. Kanishk Sharma, ME, JECRC University.
• Dr. Bhawna Sharma, CSE, JECRC University.
• Dr. Kamlesh Lakhwani, CSE, JECRC University.
• Dr. Gajanand Sharma, CSE, JECRC University.
• Dr. Surender Yadav, CSE, JECRC University.
• Dr. Anubhav Kumar, ME, JECRC University.
• Dr. Rambilas Meena, CE, JECRC University.
• Dr. Kapender Phogat, ME, JECRC University.
• Dr. Chandramani Goswami, ME, JECRC University.
• Mr. Pankaj Jain, CSE, JECRC University.
• Ms. Sarita, EEE, JECRC University.
• Ms. Ramandeep Gill, EEE, JECRC University.
• Ms. Ruchi Kulshrestha, CSE, JECRC University.
• Ms. Shreya Agarwal, CSE, JECRC University.
• Ms. Kushal Kanwar, CSE, JECRC University.
• Mr. Ankit Kumar Beniwal, CE, JECRC University.
• Mr. Sanat Jain, CSE, JECRC University.
• Ms. Shipra, CSE, JECRC University.

INTERNAL ADVISORY COMMITTEE

• Prof. D.P. Mishra, Professor Emeritus, JECRC University.
• Prof. Sanjay Sharma, Dean, Research and Development, JECRC University.
• Prof. Manish Jain, Deputy Registrar, JECRC University.
• Prof. Pankaj Sharma, HOD, ME, JECRC University.
• Prof. Dinesh Sethi, HOD, EEE, JECRC University.
• Prof. K.M.Singh, EEE, JECRC University.
• Prof. Widhi Dubey, Dean of Science, JECRC University.
• Prof. Jagdev Singh, HOD, Department of Mathematics, JECRC University.
• Prof. Sonu Pareek, Dean of Management, JECRC University.
• Prof. Shivani Kaushik, Dean of Design, JECRC University.
• Prof. Narender Kaushik, Dean, Mass Communication, JECRC University/
• Prof. N.D.Mathur, Dean of Humanities, JECRC University.

SPONSORSHIP AND COLLABORATION COMMITTEE

• Prof. Naveen Hemrajani, Dean, School of Engineering and Technology, JECRC University, Jaipur, Rajasthan, India.
• Dr. Ajay, Associate Professor, Department of Mechanical Engineering, School of Engineering and Technology, JECRC University, Jaipur, Rajasthan, India
• Prof. Manish Jain, Deputy Registrar, JECRC University.
• Dr. Bhawna Sharma, CSE, JECRC University.
• Dr. Surender Yadav, CSE, JECRC University.
• Mr. Shekhar, Head Innovation Cell, JU Maker Space, JECRC University.
• Ms. Komal Joshi, Head of Incubation Center, JECRC University.
• Mr. Nitin Gupta, SDO, JECRC University.

INTERNAL ADMINISTRATION AND LOGISTIC COMMITTEE

• Mr. Mohit Agarwal, Chief Administrative officer, JECRC University.
• Dr. Manish Jain, Deputy Registrar, JECRC University.
• Mr. Nitin Gupta, SDO, JECRC University.
• Mr. C.P. Beniwal, Senior Manager IT, JECRC University.
• Mr. Yogesh Joshi, Senior Accountant, JECRC University.

INAUGURAL AND VALEDICTORY COMMITTEE

• Prof. Ekta Meghnani, Head, Department of Biotechnology, JECRC University.
• Prof. Sapna Sharma, Department of Chemistry, JECRC University.
• Prof. Ruchi Seth, Professor, Department of Biotechnology, JECRC University.
• Dr. Poonam Hariyani, Department of Chemistry, JECRC University.
• Dr. Beena Bundela, Department of Mathematics, JECRC University.
• Dr. Tulika Singh, JECRC University.

PUBLICITY, MEDIA, AND WEBSITE COMMITTEE

• Mr. Shailendra Pratap Singh Bhati, HOD, JMC, JECRC University.
• Mr. Kartik Saini, Head, Social Media, JECRC University.
• Ms. Nikita Batra, Assistant professor, JMC, JECRC University.
• Mr. CP Beniwal, Sr. Manager IT, IT Cell, JECRC University.
• Mr. Sunil Kandpal, IT Cell, JECRC University.

Invited Speakers

• Will be updated soon...

Publication

All the full-length accepted papers of AIAMMS-2023 will be published in Scopus/Web of science indexed journals. 

Venue

JECRC University, Plot No. IS-2036 to IS-2039, Ramchandrapura Industrial Area, Vidhani, Sitapura Extension, Jaipur-303905, India

Contact

Dr. Ajay,

Conference Chair AIAMMS-2023

Department of Mechanical Engineering, School of Engineering and Technology, JECRC University, Jaipur, Rajasthan, India

Email: aiamms@jecrcu.edu.in

Website: https://conference.jecrcuniversity.edu.in/aiamms23/

Mob: +91 9467717120, +91 8982838736, +91 7296916098, +91 92144 65405, +91 94623 51869, +91 94144 79065