PROGRAM
Days: Friday, August 11th Saturday, August 12th Sunday, August 13th Monday, August 14th
Friday, August 11th
View this program: with abstractssession overviewtalk overview
13:00-20:00 Session : ICEMS 2017 Registration
Registration Desk Open
UTS Building 11 [Google Map]
Location: Main entrance of UTS Building 11 (facing Boardway)
14:00-17:00 Session 1A: Design, Modelling and Control of Linear Induction Motors (LIM) for Industrial Applications
Tutorial (http://icems2017.org/ICEMS2017_Tut_1.html)
- Prof. Wei Xu, SMIEEE, School of Electrical and Electronics Engineering, Huazhong University of Science and Technology (HUST), China
- Dr. Marcello Pucci, Institute of Intelligent Systems for the Automation (ISSIA), National Research Council of Italy (CNR), Italy
- Prof. Ion Boldea, Department of Electrical Machines and Drives. University Politehnica of Timisoara (UPT), Romania
Location: UTS Building 11 (CB11.04.400)
14:00-17:00 Session 1B: Introduction to Permanent Magnet AC Machines: Principles and Analysis
Tutorial (http://icems2017.org/ICEMS2017_Tut_2.html)
-
Associate Professor Wen Soong, Head, School of Electrical and Electronic Engineering, University of Adelaide, South Australia
Location: UTS Building 11 (CB11.03.301)
18:00-20:00 Session : Welcome Reception
Welcome Reception
Map: http://www.uts.edu.au/about/maps-and-facilities/campus-maps-and-facilities
Location: UTS Building 11 Room CB11.03.301
Saturday, August 12th
View this program: with abstractssession overviewtalk overview
09:40-11:00 Session 2: Plenary Session
-
Professor Z.Q. Zhu, “Current Developments and Trends in Permanent Magnet Machines and Drives”
-
Professor Thomas M. Jahns, “The Return of Current-Source Inverters in Future PM Machine Drives”
Chair:
Location: Cockle Bay Room 2, ICC
11:15-12:45 Session 3A: Reluctance and Non-Rare-Earth Permanent Magnet Synchronous Machines and Control
Oral Presentations
Chairs:
Location: Cockle Bay Room 2, ICC
| 11:15 | Theoretical Analysis of Torque Performance in Permanent Magnet-assisted Synchronous Reluctance Motor (ID:793) ( abstract ) |
| 11:30 | Design and Analysis of Permanent-Magnet Assisted Synchronous Reluctance Motor (ID:789) ( abstract ) |
| 11:45 | Comparison of End Effect in Series and Parallel Hybrid Permanent Magnet Variable Flux Memory Machines (ID:674) ( abstract ) |
| 12:00 | Comparison of a Flux Barrier and a Salient Pole Synchronous Reluctance Machine for High Rotational Speeds in Electric Traction Applications (ID:262) ( abstract ) |
| 12:15 | Investigation on Torque Ripple of Synchronous Reluctance Machine with Square-Wave Drive (Invited) (ID:332) ( abstract ) |
11:15-12:45 Session 3B: Switched Reluctance Motor
Oral Presentations
Chairs:
Location: Meeting Room C3.1, ICC
| 11:15 | Fundamental Output Characteristics of a Claw Pole Type Half-wave Rectified Variable Field Flux Motor (ID:523) ( abstract ) |
| 11:30 | Performance and Design of a Novel Single-Phase Hybrid Switched Reluctance Motor for Hammer Breaker Application (ID:719) ( abstract ) |
| 11:45 | An Inductive Position Sensor with Switched Reluctance Motor Structure (ID:841) ( abstract ) |
| 12:00 | An ELM Identifier and Inverse Controller Based Algorithm for Dynamic Decoupling Control of Bearingless Switched Reluctance Motor (ID:644) ( abstract ) |
| 12:15 | Modeling of Switched Reluctance Motor Based on Combined Clustering RBF network ( abstract ) |
| 12:30 | Torque Ripple Minimization For Switched Reluctance Motor with Predictive Current Control Method (ID:244) ( abstract ) |
11:15-12:45 Session 3C: Flux Switching Machine
Oral Presentations
Chairs:
Ming Cheng and Ying Fan
Location: Meeting Room C3.2, ICC
| 11:15 | Design of High Speed Permanent Magnet Generator for Solar Co-Generation System Using Motor-CAD (ID:162) ( abstract ) |
| 11:30 | Comparison of Modular Linear Flux-switching Permanent Magnet Motors With Different Mover and Stator Pole Pitch (ID:112) ( abstract ) |
| 11:45 | A Novel E-core Hybrid-Excited Flux Switching Machine Based on Biased Flux (ID:466) ( abstract ) |
| 12:00 | Double Stator and Single Rotor Type Single-Phase Flux Switching Axial Flux Permanent Magnet Motor (ID:361) ( abstract ) |
| 12:15 | Investigation on an Arc-Linear Axial Flux Permanent-Magnet Synchronous Machine (ID:256) ( abstract ) |
11:15-12:45 Session 3D: Power Electronics in Power Systems
Oral Presentations
Chairs:
Guoen Cao and Gao Congzhe
Location: Meeting Room C3.4, ICC
| 11:15 | A Power Router based on Modular Multilevel Converter Integrating UltraCapacitor Energy Storage System (ID:171) ( abstract ) |
| 11:30 | Large-Scale Photovoltaic Generation System Connected to HVDC Grid With Centralized High Voltage and High Power DC/DC Converter (ID:527) ( abstract ) |
| 11:45 | A DC-DC Conversion System for High Power HVDC-Connected Photovoltaic Power System (Invited) (ID:140) ( abstract ) |
| 12:00 | Three-level Dual Active Bridge with auxiliary inductor for Wide Zero Voltage Switching in Energy Storage System (ID:130) ( abstract ) |
| 12:15 | Novel Topology and Control of a Non-isolated Three Port DC-DC Converter for PV-Battery Power System (ID:237) ( abstract ) |
| 12:30 | Hybrid MMC Based on the Asymmetrical Double Commutated Cells and Half-bridge Cells and the DC Fault Clearance Capability (ID:026) ( abstract ) |
11:15-12:45 Session 3E: Magnetics and Applications
Oral Presentations
Chairs:
Location: Meeting Room C3.5, ICC
| 11:15 | Fault identification of Active Magnetic Levitation Bearing Displacement Sensor based on LabVIEW (ID:899) ( abstract ) |
| 11:30 | Design of a GMR-based magnetic encoder using TLE5012B (ID:394) ( abstract ) |
| 11:45 | Development of A New Standard Model of GIB Using Electromagnetic-Structural Coupled Analysis (ID:385) ( abstract ) |
| 12:00 | Manufacturing Process of Soft Magnetic Composite Cores for Permanent Magnet Machines (ID:095) ( abstract ) |
| 12:15 | Lifetime Evaluation of HV Transformers (ID:913) ( abstract ) |
11:15-12:45 Session 3F: Fault Detection and Tolerant Operation in Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | A New Fault Diagnosis Method for Hall Signals in Brushless DC Motor Drives (ID:189) ( abstract ) |
| 11:15 | Analysis of Stator Faults in Induction Machines using Growing Curvilinear Component Analysis (ID:455) ( abstract ) |
| 11:15 | The Influence Analysis of Different Fault Modes on the Post-Fault Performance of Fault Tolerant Permanent Magnet Synchronous Motor (ID:579) ( abstract ) |
| 11:15 | Asymmetrical Short-Circuit Response of the Wound Rotor Brushless Doubly-Fed Generator (ID:820) ( abstract ) |
| 11:15 | Space Vector PWM of Double Star Winding Shifted by 30° Six-Phase Induction Motor with Stator One-Phase Open-Circuit (ID:315) ( abstract ) |
| 11:15 | Five phase multi-layer drive with fault tolerant neuro-fuzzy features for safety critical applications (ID:828) ( abstract ) |
| 11:15 | Research on modeling methods of permanent magnet machine winding faults (ID:825) ( abstract ) |
| 11:15 | Fault-Tolerant Method for Six-Phase PMSM by Adjusting Phase Angle (ID:386) ( abstract ) |
| 11:15 | Fault-Tolerance Control Method for Open-Winding Multi-Disc Motor System (ID:163) ( abstract ) |
| 11:15 | High-Resistance Connection Fault Severity Detection in a Permanent Magnet Synchronous Machine Drive System (ID:165) ( abstract ) |
11:15-12:45 Session 3G: Fault Detection and Tolerant Operation in Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | Virtual Synchronous Control Strategy for Doubly-Fed Induction Generator under Asymmetrical Grid Faults (ID:124) ( abstract ) |
| 11:15 | A New Detection Method for Broken Rotor Bar Fault in Induction Motors Based on WSF and BBPSO (ID:319) ( abstract ) |
| 11:15 | Diagnose and Analysis of Stator Inter-turn Short-circuit Fault in DFIG Considering Control Strategies (ID:120) ( abstract ) |
| 11:15 | Influence of Inverter Short Circuit Fault on Electromagnetic Field for Permanent Magnet Synchronous Motor (ID:552) ( abstract ) |
| 11:15 | Research on Interturn Short Circuit Fault Location of Rotor Winding in Synchronous Electric Machines (ID:166) ( abstract ) |
| 11:15 | Model predictive current control for the semicontrolled open winding PMSG (ID:619) ( abstract ) |
| 11:15 | A Simplified Model Predictive Control for Open-Winding PMSM (ID:690) ( abstract ) |
| 11:15 | Study on Overload Performance Enhancement of Motor Based on Heat Storage of Phase Change Paraffin (ID:260) ( abstract ) |
| 11:15 | Influence of Anti-short-circuit Design on the Performance of Dual-redundancy PMSM (ID:506) ( abstract ) |
| 11:15 | A Comparative Study on Two Outer Rotor PMSMs for In-Wheel Direct Drive under Short-Circuit Faults (ID:010) ( abstract ) |
11:15-12:45 Session 3H: Sensored and Sensorless Control of Electric Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | Rotor Displacement Self-sensing of Permanent Magnet Bias Magnetic Bearings Using three-level Switching Amplifier Power Demodulation (ID:191) ( abstract ) |
| 11:15 | An Improved Position Detection Method for Permanent Magnet Linear Motor Using Linear Hall Sensors (ID:223) ( abstract ) |
| 11:15 | Sensorless Control for Flux-Switching Permanent Magnet Machine Based on Sliding Mode Observer (ID:393) ( abstract ) |
| 11:15 | Research on Speed Sensorless Method for Permanent Magnet Linear Synchronous Motor Based on High Frequency Pulsating Voltage Signal Injection (ID:498) ( abstract ) |
| 11:15 | SRM mutual inductance sense for improved sensorless control (ID:871) ( abstract ) |
| 11:15 | Sensorless Control on Interior Permanent-Magnet Synchronous Motor Drive over Wide Speed Range Operation Based on the Current Derivative Measurements (ID:877) ( abstract ) |
| 11:15 | Parameter Sensitivity of Flux-Linkage based Sensorless Control for Permanent Magnet Synchronous Motors (ID:730) ( abstract ) |
| 11:15 | Sensor-less Control of Maglev Permanent Magnet Linear Synchronous Motor based on Sliding Mode Observer (ID:431) ( abstract ) |
| 11:15 | Sensorless Direct Power Control for High-speed PMSM Based on High-precision Rotor Position Estimation (ID:025) ( abstract ) |
| 11:15 | Sensorless Control of Five-phase IPM Motor Based on High-Frequency Sinusoidal Voltage Injection (ID:756) ( abstract ) |
11:15-12:45 Session 3I: Motor Drives
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | Pulsation Reduction method using notch filter with Pole-Zero cancellation and lead controller in single-inverter-based PMSM parallel operation (ID:154) ( abstract ) |
| 11:15 | Parameters self-turning fuzzy control for controllable excitation linear synchronous motor magnetic suspension system (ID:181) ( abstract ) |
| 11:15 | Position sensorless control method of IPMSM applying three shunt sensing PWM inverter using predictive current (ID:484) ( abstract ) |
| 11:15 | A New Hybrid Asymmetric and Buck-Boost Fronted Converter for SRM with Active Boost Voltage Capability (ID:561) ( abstract ) |
| 11:15 | A Novel Reduced-Order Load Torque Observer Based Discrete-Time Sliding Mode Control for PMSM Speed Servo System (ID:023) ( abstract ) |
| 11:15 | High Power Factor Control of Brushless DC Motor Drive System without Electrolytic Capacitor (ID:188) ( abstract ) |
| 11:15 | A Novel Boost Chopper Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors (ID:122) ( abstract ) |
| 11:15 | A Study on a Novel Multistage-AFPM with Modular Stator Core Made of Different Materials of Silicon Steel and SMC (ID:219) ( abstract ) |
| 11:15 | Control and LC Resonance Damping for Multiple-Channel Indirect Matrix Converters Fed Dual Three-phase PMSM Drive (ID:480) ( abstract ) |
| 11:15 | Small Signal Modeling and Stability Analysis of Virtual Synchronous Generators (ID:283) ( abstract ) |
| 11:15 | Low Carrier Ratio Control for Dual Stator-Winding Induction Generator with Selective Harmonic Elimination Pulsewidth Modulation (ID:198) ( abstract ) |
11:15-12:45 Session 3J: Energy Storage
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | Experimental Application of Least-Squares Technique for Estimation of Double Layer Super Capacitor Parameters (ID:453) ( abstract ) |
| 11:15 | A battery storage control scheme for AC microgrids (ID:879) ( abstract ) |
| 11:15 | Research on Hybrid Energy Storage Configuration in Industrial estate (ID:544) ( abstract ) |
| 11:15 | An Optimal Frequency Division Control for Hybrid Energy Storage (ID:222) ( abstract ) |
| 11:15 | Analysis on Impact of High Energy-consuming Enterprise in Exploitation of Renewable Energy (ID:015) ( abstract ) |
| 11:15 | Design Techniques of Distributed Photovoltaic/Energy Storage System (ID:629) ( abstract ) |
| 11:15 | Study on utilization of EV as storage battery (ID:814) ( abstract ) |
| 11:15 | Considerations for Sizing Energy Storage Technologies in Wave Energy Systems (ID:734) ( abstract ) |
| 11:15 | State of Charge Estimation of Lead-carbon Batteries in Actual engineering (ID:503) ( abstract ) |
13:45-15:15 Session 4A: Electric Machines Analysis and Design
Oral Presentations
Location: Cockle Bay Room 2, ICC
| 13:45 | The Study of Highly Demagnetization Performance IPMSM (Interior Permanent Magnet Synchronous Motor) under Hot Environments (ID:868) ( abstract ) |
| 14:00 | Comparative Study of Magnetic Gearing Effect in Integral Slot, Fractional Slot and Vernier PM Machines (ID:667) ( abstract ) |
| 14:15 | A Novel Flat Linear Switched Reluctance Motor with Doubly-excited Windings (ID:698) ( abstract ) |
| 14:30 | Calculation of Core Losses Under DC Bias and Harmonics Based On Jiles–Atherton Dynamic Hysteresis Model Combined with Finite Element Analysis (ID:192) ( abstract ) |
| 14:45 | A Dynamical Selective Harmonic Elimination for the Electrically Excited Synchronous Machines with a low switching frequency (ID:167) ( abstract ) |
13:45-15:15 Session 4B: Brushless Motors
Oral Presentations
Chairs:
Location: Meeting Room C3.1, ICC
| 13:45 | A Novel Speed-Power Control Scheme of a High Speed BLDC Motor for a Blender Machine (ID:329) ( abstract ) |
| 14:00 | Parameter Matching and Structure Optimal Design of a Brushless DC Motor for a Battery Electric Vehicle (ID:436) ( abstract ) |
| 14:15 | Analytical Calculation and Analysis of Electromagnetic Torque for a Skewed Brushless DC Motor with Halbach Array (ID:212) ( abstract ) |
| 14:30 | Speed-Torque Characteristics of Brushless DC Motor Based on Average Back EMF During Conduction Area (ID:144) ( abstract ) |
| 14:45 | Research and Design of Speed Control for High Speed Sensorless Brushless DC Motor with Commutation Compensation (ID:149) ( abstract ) |
13:45-15:15 Session 4C: Fault Detection and Tolerant Operation in Machines
Oral Presentations
Chairs:
Location: Meeting Room C3.2, ICC
| 13:45 | Bearing Fault Detection for Drivetrains using Adaptive Filters based Wavelet Transform (ID:041) ( abstract ) |
| 14:00 | Novel Fault-Tolerant Stator Structure for Modular PMSMs with Fractional-Slot Overlapping Winding (ID:200) ( abstract ) |
| 14:15 | A two-stage detection and fault classification for electric pitch drives in offshore wind farms using support vector machine (ID:491) ( abstract ) |
| 14:30 | Realistic and Very Fast Simulation of Electric Machines and Apparatus by using Massively Parallel Processing (ID:396) ( abstract ) |
| 14:45 | Detection of rotor broken bar fault of asynchronous motor based on Duffing and PSO algorithm (ID:918) ( abstract ) |
13:45-15:15 Session 4D: High Power Converters
Oral Presentations
Chairs:
Guoen Cao and Ningyi Dai
Location: Meeting Room C3.4, ICC
| 13:45 | A PI Controller with Current Feedforward to Improve the Steady-State Error Performance for a Current Controlled Direct Matrix Converter (ID:064) ( abstract ) |
| 14:00 | Space Vector Modulation based Proportional Resonant Current Controller with Selective Harmonics Compensation for Matrix Converter Systems (ID:062) ( abstract ) |
| 14:15 | Startup Strategy with Constant Peak Transformer Current for Hybrid Multilevel Energy Router (ID:291) ( abstract ) |
| 14:30 | PET Applicable to 3-Phase Medium-Voltage AC Grid with DC Bus Self-Balancing Capacity (ID:524) ( abstract ) |
| 14:45 | Hybrid Railway Power Conditioner Based on Chopper Cell Modular Multilevel Converter with Four Legs (ID:065) ( abstract ) |
| 15:00 | Model Predictive Control Applied to a Single Phase Seven-Level Active Rectifier (ID:700) ( abstract ) |
13:45-15:15 Session 4E: Wind Farm and Power Plant
Oral Presentations
Chairs:
Location: Meeting Room C3.5, ICC
| 13:45 | Simulation of a Large-Scale Wind Farm Consisting of Series-Connected Wind Generators when Considering Wind Speed Distribution (ID:434) ( abstract ) |
| 14:00 | Reactive Power Coordinated Control Scheme of Double Fed Wind Farm under Grid Fault (ID:126) ( abstract ) |
| 14:15 | Frequency Control of Power System with Solar and Wind Power Stations Installed by Flow Control of HVDC Interconnection Line (ID:621) ( abstract ) |
| 14:30 | Hybrid Power Plant Offering Strategy to Deal with the Stochastic Nature and Outage of Wind Generators (ID:414) ( abstract ) |
| 14:45 | Coordinated Power Dispatch of a DFIG based Wind Farm for Output Power Maximizing Considering Wakes and Electrical Loss (ID:735) ( abstract ) |
| 15:00 | ANALYSIS FOR SUB-SYNCHRONOUS CONTROL INTERACTION BASED ON IMPEDANCE MODEL (ID:548) ( abstract ) |
13:45-15:15 Session 4F: Sensored and Sensorless Control of Electric Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | A Novel Rotor Position Detection Method of PMSM Based on MEMS Inertial Sensor (ID:040) ( abstract ) |
| 13:45 | Speed Observer Based on Second-order Sliding Mode with the adaptive resistance for a Bearingless Induction Motor (ID:450) ( abstract ) |
| 13:45 | A Design of Sensorless Permanent Magnet Synchronous Motor Drive Based on V/f Control (ID:156) ( abstract ) |
| 13:45 | A Novel Control Strategy for Electrolytic Capacitor-Less PMSM Drives System (ID:805) ( abstract ) |
| 13:45 | Model Predictive Direct Power Control of Doubly Fed Induction Generator Under Unbalanced Grid Voltages (ID:826) ( abstract ) |
| 13:45 | A Novel Method for Improving Utilization Ratio of Power Supply Used in Variable Frequency Controlling System of PMSM (ID:855) ( abstract ) |
| 13:45 | Control System and Simulation of Arc-Linear Permanent-Magnet Synchronous Machine with Compensation Windings (ID:648) ( abstract ) |
| 13:45 | A Novel Combined Magnetic Encoder for External Rotor Motor Based on AS5304 and SG211V (ID:216) ( abstract ) |
| 13:45 | Comparative Research of Two Fluxweakening Method of PMSMs in High Speed Range (ID:421) ( abstract ) |
| 13:45 | Design of Integral Sliding Mode Controller for Flux-Weakening Control of PMSM based on Single-Current Regulation (ID:588) ( abstract ) |
13:45-15:15 Session 4G: Control in Electric Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Cloud Based Real-time Monitoring and Control of Diesel Generator using the IoT Technology (ID:428) ( abstract ) |
| 13:45 | Research on Two-Degree-of-Freedom PID Controller of Permanent Magnet Synchronous Motor Based on Fuzzy Inference (ID:492) ( abstract ) |
| 13:45 | Research on Stress of Magnetically Controlled Saturable Reactor under Practical Working Conditions (ID:595) ( abstract ) |
| 13:45 | Finite-Control-Set Model Predictive Direct Torque Control with Extended Set of Voltage Space Vectors (ID:679) ( abstract ) |
| 13:45 | Voltage Vector Selection Strategy of the DTC for SPMSM Based on Predictive Control (ID:788) ( abstract ) |
| 13:45 | Design of Three-level Inverter in Permanent Magnet Synchronous Motor System Based on Repetitive Control (ID:151) ( abstract ) |
| 13:45 | Model Predictive Torque-Vector Control for Four-Switch Three-Phase Inverter-fed PMSM with Capacitor Voltage Offset Suppression (ID:218) ( abstract ) |
| 13:45 | A New Slip Compensation Method for Induction Motors Based on Current Vector Decoupling (ID:443) ( abstract ) |
| 13:45 | Design and Comparison of Two Non-Rare-Earth Permanent Magnet Synchronous Reluctance Motors for EV Applications (ID:360) ( abstract ) |
13:45-15:15 Session 4H: Brushless Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Model Predictive Control of Brushless Doubly Fed Twin Stator Induction Generator: A Model Reduction Approach (ID:746) ( abstract ) |
| 13:45 | Reduction of Slot Harmonics in a Brushless Doubly-Fed Machine by Using the Tooth Notching (ID:424) ( abstract ) |
| 13:45 | Brushless Doubly Fed Reluctance Machine Parametrisation (ID:474) ( abstract ) |
| 13:45 | A New Stator Back Iron Design For Brushless Doubly Fed Machines (ID:627) ( abstract ) |
| 13:45 | Design Study on Novel Three-phase Rotary Transformer Used for Brushless Doubly Fed Induction Generators (ID:635) ( abstract ) |
| 13:45 | A New Optimized Rotor Design for Brushless Doubly Fed Machines (ID:176) ( abstract ) |
| 13:45 | Comparison Research of Novel Brushless Hybrid-Excitation Axial Flux Machine (ID:089) ( abstract ) |
| 13:45 | Structural Design and Mechanical Performance Analysis of Dual-Stator Brushless Doubly-Fed Generator (ID:703) ( abstract ) |
| 13:45 | Research on Control Strategy of a Novel Axial Doubly Salient Electro-magnetic Machine (ID:892) ( abstract ) |
| 13:45 | A Study on the Current Minimization for a Low Voltage BLDC Motor (ID:695) ( abstract ) |
13:45-15:15 Session 4I: Motor Drives
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Modeling of Electromechanical Actuators Using Multi-body Dynamics (ID:381) ( abstract ) |
| 13:45 | A Novel Third Harmonic Current Injection Method to Optimize the Air-gap Flux for Multiphase Induction Machine (ID:121) ( abstract ) |
| 13:45 | A Simple Duty Cycle Modulated Direct Torque Control for Permanent Magnet Synchronous Motors (ID:146) ( abstract ) |
| 13:45 | Research on the Multilevel-Switching-Linear Hybrid Scheme for PMSM Drives (ID:174) ( abstract ) |
| 13:45 | Control Strategy of DFIG Under Unbalanced Grid Voltage Conditions Based on Complex-Vector-Resonant Regulator (ID:3)78 ( abstract ) |
| 13:45 | A Study on the Life Cycle Cost Analysis of PWM modules in Auxiliary Power System (ID:529) ( abstract ) |
| 13:45 | Analysis of Failure Code of Auxiliary Power System SIBCOS in 8200 Series Electric Locomotive Using Signal Analyzer (ID:511) ( abstract ) |
| 13:45 | Optimal Design of Power Supply System for a Novel Permanent Bistable Electromagnetic Clutch (ID:334) ( abstract ) |
| 13:45 | A 12-Sector Torque Ripple Reduction Method Based on the New Zero Voltage Vectors in Direct Torque Control of BLDCM (ID:131) ( abstract ) |
| 13:45 | Inductive Coupling Wireless Power Transfer with LC and LLC resonance operations according to distance between Tx and Rx (ID:048) ( abstract ) |
| 13:45 | An Improved Control Strategy Based on the Duty Ratio Modulation to Reduce the Torque Ripple in Direct Torque Control of BLDCM (ID:132) ( abstract ) |
| 13:45 | A Modified General Model for SiC Power MOSFET in Rail Transportation Application (ID:400) ( abstract ) |
13:45-15:15 Session 4J: Planning, Operation and Energy Markets
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Managing Cumulative Distribution Function of The profit: a Producer Risk Management Case (ID:791) ( abstract ) |
| 13:45 | Study on Regulatory Position Commercial Grade Item Dedication for Digital Electrical Appliances in Nuclear Power Plant (ID:432) ( abstract ) |
| 13:45 | Issues on Load Shedding in a Microgrid Operated At Constant Frequency (ID:297) ( abstract ) |
| 13:45 | Study on the Improvement of Power Utilization Efficiency of Industrial Consumers using Small Scale Microgrid (ID:195) ( abstract ) |
| 13:45 | A Novel Method for Optimizing Distributed Generation in Distribution Networks Using the Game Theory (ID:907) ( abstract ) |
| 13:45 | Fractional-order Analysis Model and Control of Chaotic Oscillation in a 4D Power System Including Synchronous Generator Exciter (ID:005) ( abstract ) |
15:30-17:00 Session 5A: Permanent Magnet Machines
Oral Presentations
Chairs:
Location: Cockle Bay Room 2, ICC
| 15:30 | Fault Tolerant Control of Axial Field Flux-Switching Fault Tolerant Machine Under Single-Phase Faults (ID:591) ( abstract ) |
| 15:45 | Comparative Study of Flux-regulation method for Stator Permanent magnet memory machine (ID:241) ( abstract ) |
| 16:00 | Sliding Mode Control of Axial Field Flux-Switching Permanent Magnet Machine (ID:235) ( abstract ) |
| 16:15 | Field-Weakening Performance of Permanent Magnet Memory Machines (ID:798) ( abstract ) |
| 16:30 | Comparison of Two Control Methods for Axial Field Flux-Switching Permanent Magnet Motor (ID:233) ( abstract ) |
| 16:45 | Static Characteristics of a Dual-Rotor Axial Field Flux-Switching Permanent Magnet Machine (Invited) (ID:824) ( abstract ) |
15:30-17:00 Session 5B: Surface mounted Permanent Magnet Machines
Oral Presentations
Chairs:
Location: Meeting Room C3.1, ICC
| 15:30 | Enhanced ride performance of electric vehicle suspension system based on genetic algorithm optimization (ID:494) ( abstract ) |
| 15:45 | Parameter Analysis of a new Axial Flux Interior Permanent Magnet Machine for Electric Vehicle Application (ID:094) ( abstract ) |
| 16:00 | Analytical Modeling of Air-Gap Flux Density for Surface Mounted Permanent Magnet Machines with Isodiametric Magnetic Pole (ID:074) ( abstract ) |
| 16:15 | An Improved Off-line Identification Technology for Parameters of Surface Permanent Magnet Synchronous Motors (ID:344) ( abstract ) |
| 16:30 | Investigation on surface mounted PM machines with magnet recycling concept for hybrid electrical vehicle applications (ID:772) ( abstract ) |
15:30-17:00 Session 5C: Electric Machines in Electric Vehicles
Oral Presentations
Chairs:
Location: Meeting Room C3.2, ICC
| 15:30 | Improved Analytical Model of a Dual-Rotor Permanent Magnet Reluctance Machine Based on Magnetic Networks (ID:382) ( abstract ) |
| 15:45 | A Segmented Rotor Type Switched Reluctance Machine for BSGs of Hybrid Electric Vehicles: Concept, Design and Analysis (ID:356) ( abstract ) |
| 16:00 | Efficiency Optimization Control of Permanent Magnet Synchronous Motor System with SiC MOSFETs for Electric Vehicles (ID:134) ( abstract ) |
| 16:15 | Design Method on Induction Motor of Electric Vehicle for Maintaining Torque Performance at Field Weakening Region (ID:823) ( abstract ) |
| 16:30 | Field-Circuit Coupled Design and Analysis for Permanent Magnet Synchronous Motor System Used in Electric Vehicles (ID:088) ( abstract ) |
15:30-17:00 Session 5D: Motor Drives
Oral Presentations
Chairs:
Location: Meeting Room C3.4, ICC
| 15:30 | Torque ripple minimization of an IPMSG with Fractional-Slot, Concentrated-Winding using Uncontrolled Rectifier-connected Boost Converter Control (ID:413) ( abstract ) |
| 15:45 | Moving Average Filter-Based Model Predictive Control for Electric Vehicles Bidirectional Power Flow (ID:663) ( abstract ) |
| 16:00 | Direct Torque Control with a Modified Switching Table for a Direct Matrix Converter based AC Motor Drive System (ID:063) ( abstract ) |
| 16:15 | Highly Integrated Bidirectional Vehicle-to-Grid (V2G) System for Electric Vehicles Based on Open Winding Permanent Magnet Synchronous Motor (ID:775) ( abstract ) |
| 16:30 | Common-Mode Voltage Attenuation of an Active Common-Mode Filter in a Motor Drive System Fed by a PWM Inverter (ID:659) ( abstract ) |
| 16:45 | Impact of PWM Switching Frequency on the Radiated Acoustic Noise from a Traction Motor (ID:406) ( abstract ) |
15:30-17:00 Session 5E: Energy Storage Systems
Oral Presentations
Chairs:
Location: Meeting Room C3.5, ICC
| 15:30 | A Multifunctional Interface circuit for Battery-Ultracapacitor Hybrid Energy Storage System (ID:401) ( abstract ) |
| 15:45 | Experimental Analysis and Modeling of Temperature Dependence of Lithium-Ion Battery Direct Current Resistance for Power Capability Prediction (ID:737) ( abstract ) |
| 16:00 | Investigation and comparison of the Integration of Flywheel Energy Storage Systems (FESS) in Hybrid Electric (HEV) and Electric Vehicles (EV) using Bond-Graphs (ID:362) ( abstract ) |
| 16:15 | Study on Equalizer and Equilibrium Strategy of Battery (ID:305) ( abstract ) |
| 16:30 | Verification of charge and discharge system composed of multiple lithium ion batteries (ID:457) ( abstract ) |
| 16:45 | Analysis and Simulation on Active Damping Control of Resonance in Multi-parallel Grid-Connected Inverters System (Invited) (ID:078) ( abstract ) |
15:30-17:00 Session 5F: Control in Electric Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | Force ripples suppression of Tubular Transverse-Flux and Flux-Reversal Linear Permanent Magnet Motor based on ADRC (ID:197) ( abstract ) |
| 15:30 | Comparison of Switched-Mode Rectifier and Inverter Control of Surface PM Generators (ID:851) ( abstract ) |
| 15:30 | A Torque-injection-based Method for Stator Temperature Estimation of Direct-Torque-Controlled Permanent Magnet Synchronous Motors (ID:170) ( abstract ) |
| 15:30 | Robustness Improvement of Predictive Current Control for PMLSM Integrating Adaptive Internal Model with Time Delay Compensation (ID:391) ( abstract ) |
| 15:30 | A Study on Induction Generator Control Methods for Commercial Vehicle based on Slip- and Vector Control (ID:464) ( abstract ) |
| 15:30 | Direct Torque and Flux Control of a Fractional-Slot Concentrated-Winding IPMSM in Deep Flux-Weakening Region (ID:652) ( abstract ) |
| 15:30 | MRAS Based Parameter Identification and Integration on Deadbeat-Direct Torque and Flux Control (ID:367) ( abstract ) |
| 15:30 | Application of μ synthesis to the control of active magnetic bearings with parametric uncertainty (ID:589) ( abstract ) |
| 15:30 | Emergency Power Control of Diesel Generator for Commercial Building Applied DC Distribution (ID:688) ( abstract ) |
| 15:30 | Integrated Optocoupler Circuit Design in High Voltage Bipolar-CMOS-DMOS Process (ID:616) ( abstract ) |
| 15:30 | Optimal Design of Cooling System for Water Cooling Motor Used for Mini Electric Vehicle (ID:568) ( abstract ) |
15:30-17:00 Session 5G: Switched Reluctance Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | Comparison of Torque Characteristics for a Novel Segmented and a Conventional Switched Reluctance Motors (ID:316) ( abstract ) |
| 15:30 | Comparative Study of Wound Field Flux-Switching Machines and Switched Reluctance Machines (ID:375) ( abstract ) |
| 15:30 | A Novel Axial-Flux Switched Reluctance Machine with Segmented Stator and Rotor (ID:628) ( abstract ) |
| 15:30 | Predicting Eddy Current Loss of Winding in Switched Reluctance Motor (ID:796) ( abstract ) |
| 15:30 | Performance Analysis of Segmental Type SRMs for HVAC Application (ID:720) ( abstract ) |
| 15:30 | Speed Control of Switched Reluctance Drive Systems Based on Correlative Angle Switching Technique for Traction Applications (ID:408) ( abstract ) |
| 15:30 | Study on efficiency of firing angles of switched reluctance motors (ID:773) ( abstract ) |
| 15:30 | Comparison between Two Combined Star-Delta Configurations on Synchronous Reluctance Motors Performance (ID:079) ( abstract ) |
| 15:30 | Design and Analysis of Reluctance Synchronous Motor with Asymmetric Salient Pole (ID:683) ( abstract ) |
15:30-17:00 Session 5H: Flux Switching Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | Direct Thrust Control of Complementary and Modular Linear Flux-switching Permanent Magnet Motor (ID:844) ( abstract ) |
| 15:30 | Design and Comparison of Two Types of Flux-switching Permanent Magnet Machines with Different Stator Topologies (ID:608) ( abstract ) |
| 15:30 | Unity Power Factor Control of Hybrid Excited Axial Field Flux-Switching Permanent Magnet Machine (ID:398) ( abstract ) |
| 15:30 | Field-Oriented Vector Control System on Flux-Switching Permanent Magnet Machines (ID:502) ( abstract ) |
| 15:30 | Speed Control of Double-sided Linear Flux-Switching Permanent Magnet Motor System for Electromagnetic Launch System (ID:728) ( abstract ) |
| 15:30 | A Study on the Iron Losses in Flux-Switching Permanent Magnet Machines (ID:016) ( abstract ) |
| 15:30 | Flux Switching Machines: A Review on Design and Applications (ID:761) ( abstract ) |
| 15:30 | Research on Fast Design of Key Variables of Bearingless Flux-switching Motor Based on Variable Structure Magnetic Network (ID:190) ( abstract ) |
| 15:30 | An investigation of a Linear Flux Switching Machine with Tapered Ferromagnetic Poles (ID:227) ( abstract ) |
| 15:30 | Design of a Double-Stator Hybrid Flux Switching Permanent Magnet Machine for Direct-Drive Robotics (ID:550) ( abstract ) |
15:30-17:00 Session 5I: Wireless Power Transfer
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | Optimal Power Transfer with Aluminum Shielding for Wireless Power Transfer Systems (ID:324) ( abstract ) |
| 15:30 | Analytic Solution for Transfer Efficiency of Magnetically-Coupled Inductive Wireless Power Transfer System with Constant Power Load (ID:581) ( abstract ) |
| 15:30 | Comparison of Two Structural Magnetic Coils for Wireless Power Transfer (ID:799) ( abstract ) |
| 15:30 | Misalignment Based Electric Circuit of a Wireless Power Transfer Transformer for Light Rail Transit (ID:668) ( abstract ) |
| 15:30 | Study on a High Coupling Coefficient Contactless Transformer for the ICPT System in Railway Transportation (ID:057) ( abstract ) |
| 15:30 | Reluctance Circuit Analysis and Structure Optimization of Contactless Transformer with Asymmetrical Windings (ID:056) ( abstract ) |
| 15:30 | Efficiency Analysis of Inductive Coupled Power Transfer with Multi-pickups (ID:103) ( abstract ) |
15:30-17:00 Session 5J: Fault diagnosis and Testing
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | The Gas Regulator Fault Diagnosis Based on PCA-RBF Neural Network (ID:113) ( abstract ) |
| 15:30 | Detection Method of Low Voltage Series DC Arc based on the Pattern Matching Algorithm (ID:923) ( abstract ) |
| 15:30 | Fault Detection and Diagnostic Coverage for The Domain Control Units of Vehicle E/E Systems on Functional Safety (ID:631) ( abstract ) |
| 15:30 | Development of Image Processing Technique Based System for Measuring the Locus of Spindle Vibration with High Speed (ID:857) ( abstract ) |
| 15:30 | Alarm Threshold Settings and Field Test of Non-contact MEMS UHVDC Electroscope (ID:909) ( abstract ) |
| 15:30 | Development of a Wireless Telemetry-Based Traffic Sensor Technology to Overcome the Lead Cable Breakage in AVC (ID:441) ( abstract ) |
| 15:30 | Finite Element Analysis of Positive and Negative Discharge in Atmospheric Air (ID:340) ( abstract ) |
| 15:30 | Parameter Estimation of Linear Oscillatory Actuator with RLS Method (ID:438) ( abstract ) |
| 15:30 | Design of a generalised charge-based self-sensing model for quasi-static piezoelectric actuators (ID:702) ( abstract ) |
Sunday, August 13th
View this program: with abstractssession overviewtalk overview
09:00-11:00 Session 6: Plenary Session
-
Professor Akira Chiba, “Recent Development of Switched Reluctance Motors for Hybrid Electrical Vehicles”
-
Professor Jian Guo Zhu, “Robust Design Optimization for High Quality Production of Electrical Machines and Drive Systems”
-
Professor Zhengming Zhao, “Power Electronics in Modern Power Grids”
Chair:
Location: Cockle Bay Room 2, ICC
11:15-12:45 Session 7A: Electric Machines Analysis and Design
Oral Presentations
Chairs:
Location: Cockle Bay Room 2, ICC
| 11:15 | Stator Design Techniques to Reduce Noise and Vibration in 12-slot/10-pole Permanent Magnet Synchronous Machines (ID:837) ( abstract ) |
| 11:30 | Study on Commutation Control Method for Reducing Noise and Vibration in SRM (ID:317) ( abstract ) |
| 11:45 | Monitoring and Damping Unbalanced Magnetic Pull Due to Eccentricity Fault in Induction Machines: A Review (ID:068) ( abstract ) |
| 12:00 | Influence of Slot/Pole Combinations and Magnet Thickness on Unbalanced Magnetic Force in PM Machines with Different Rotor Eccentricity and Magnetization (ID:033) ( abstract ) |
| 12:15 | Influence Mechanism on Vibration and Noise of PMSM for Different Structures of Skewed Stator (ID:147) ( abstract ) |
11:15-12:45 Session 7B: Electric Machines in Electric Vehicles
Oral Presentations
Chairs:
Location: Meeting Room C3.1, ICC
| 11:15 | Wide Driving Range Realization by Multi-Layer Multi-Phase Motor for Electric Vehicle (ID:769) ( abstract ) |
| 11:30 | Optimal Rotor Design of Permanent Magnet Synchronous Motor for Electric Vehicle Applications (ID:495) ( abstract ) |
| 11:45 | Implementation of Motor Control System for Electric Bus based on DSP (ID:859) ( abstract ) |
| 12:00 | Optimized Structure Design of a Bridge-like Piezoelectric Energy Harvester Based on Finite Element Analysis (ID:501) ( abstract ) |
| 12:15 | Studies of High-Frequency Iron Core Loss for Synchronous Electric Machines Used in Electric Vehicles (ID:578) ( abstract ) |
| 12:30 | Safe turn-off strategy for Electric Drives in EV (ID:672) ( abstract ) |
11:15-12:45 Session 7C: Wind Energy Generators
Oral Presentations
Chairs:
Location: Meeting Room C3.2, ICC
| 11:15 | Research on Parallel Stator Winding Open Circuit Faults of Permanent Magnet Wind Turbine (ID:560) ( abstract ) |
| 11:30 | Design and Analysis of a Novel Linear Rotary Permanent Magnet Generator for Wind-Wave Combined Power Generation System (ID:264) ( abstract ) |
| 11:45 | Steady-State Characteristics of Self-Excited Synchronous Generators with Damper Windings for Current-Source Type Wind Farm (ID:338) ( abstract ) |
| 12:00 | Studies on Characteristics of PMSGs Used for Current-Source Type Wind Farm Composed of Series-connected Wind Generators (ID:335) ( abstract ) |
| 12:15 | A Direct Power Control Strategy of Open-Winding Brushless Doubly-Fed Wind Power Generator on Grid and Machine Sides (ID:563) ( abstract ) |
11:15-12:45 Session 7D: Discrete and Integrated Semiconductors
Oral Presentations
Chairs:
Location: Meeting Room C3.4, ICC
| 11:15 | Comparison of Two Gate Drivers for SiC MOSFETs on Switching Performance and Over Current Protection (ID:518) ( abstract ) |
| 11:30 | Implementation of a Phase Shift Full-Bridge Converter for LDC using GaN HEMT (ID:575) ( abstract ) |
| 11:45 | Electro-thermal based junction temperature estimation model and thermal performance analysis for IGBT module (ID:207) ( abstract ) |
| 12:00 | Fuzzy-Based Self-Tuning Model Predictive Direct Power Control of Grid-Connected Power Converters (ID:736) ( abstract ) |
| 12:15 | AN IMPROVED MPPT STRATEGY FOR DEPRESSION JUNCTION TEMPERATURE FLUCTUATION OF IGBT MODULE IN DOUBLY FED WIND POWER CONVERTER (ID:638) ( abstract ) |
| 12:30 | Decoupling Control Strategy of Series-Connected DC-DC Boost Converter for HVDC-connected Photovoltaic Unit (ID:606) ( abstract ) |
11:15-12:45 Session 7E: Modeling and Analysis of Magnetics
Oral Presentations
Chairs:
Location: Meeting Room C3.5, ICC
| 11:15 | The Engineering Design and Magnetic-thermal Coupled Analysis of Phase-shifting Reactor (ID:807) ( abstract ) |
| 11:30 | Ferroresonance assessment in a case study wind farm with 8 units of 2 MVA DFIG wind turbines (ID:911) ( abstract ) |
| 11:45 | Investigation of the Dynamic Characteristics of a Coaxial Magnetic Gear under Loading Condition Based on Analytical Model (Invited) (ID:096) ( abstract ) |
| 12:00 | Multi-field Coupling Analysis of High Speed Permanent Magnet Machine (ID:139) ( abstract ) |
| 12:15 | Feature Selection for The Classification of Clinical Data of Stroke Patients (ID:836) ( abstract ) |
11:15-12:45 Session 7F: Electric Machine Analysis and Design
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | Analysis of a Novel Axial Flux Permanent Magnet Eddy-Current Coupling with a Movable Stator Ring (ID:109) ( abstract ) |
| 11:15 | Axial Magnetic Force Analysis of the Direct-drive Radial Axial Flow Turbine with Conical-rotor PM Generator (ID:251) ( abstract ) |
| 11:15 | Numerical Evaluation on the Cooling Performance of a Wound Field Synchronous Motor with Dual Cooling Passages (ID:915) ( abstract ) |
| 11:15 | Research on Shaft Voltage in Permanent Magnet Synchronous Machine with Sectionalized Stators (ID:337) ( abstract ) |
| 11:15 | The Inductance Parameter Calculation for Coarse-Exact Coupling Co-magnetic Reluctance Resolver (ID:577) ( abstract ) |
| 11:15 | A Dual Permanent Magnet Machine for High-Torque Low-Speed Applications (ID:584) ( abstract ) |
| 11:15 | Research on the Performance Simulation of Multi-stator Traveling Wave Type Ultrasonic Motors (ID:598) ( abstract ) |
| 11:15 | Novel Variable Reluctance Hybrid Magnet Memory Machines (ID:699) ( abstract ) |
| 11:15 | Design and Research of High-capacity Doubly-fed Start-up Low-speed High-torque PMSM (ID:822) ( abstract ) |
| 11:15 | Design and Analysis of a Novel Two-speed Line-start Permanent Magnet Motor (ID:713) ( abstract ) |
| 11:15 | Design and Analysis of Magnetic-Geared Permanent Magnet Synchronous Motor for Driving Electric Vehicles (ID:301) ( abstract ) |
11:15-12:45 Session 7G: Magnetic Materials for Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | Design and Analysis of Outer-Rotor Permanent Magnet Synchronous Machine with Amorphous Stator Core (ID:781) ( abstract ) |
| 11:15 | A Design Method with Iron Powder Core for a Claw Pole Type Half-wave Rectified Variable Field Flux Motor (ID:522) ( abstract ) |
| 11:15 | Numerical Simulation of the Thermo-Electromagnetic Properties of Coated Superconductor Magnets in Traveling Magnetic Field (ID:341) ( abstract ) |
| 11:15 | Investigation of the Flux Leakage Effects in Transverse-Flux Magnetic Gear (ID:665) ( abstract ) |
| 11:15 | Eddy Current Loss Analysis of Two Degrees of Freedom Permanent Magnet Wind Power Generator (ID:031) ( abstract ) |
| 11:15 | Analysis and Experiment of Temperature Gradient Method for Modal Improving apply to Magnetic High-speed Rotor (ID:133) ( abstract ) |
| 11:15 | Discussion on Comparison of Magnetic Geared Linear Motors with Different Magnetization Direction (ID:504) ( abstract ) |
| 11:15 | Influence of axial ventilation structures on Electromagnetic field and Heat Transfer of Traction Motor used for High - speed EMU (ID:574) ( abstract ) |
| 11:15 | Insulation Design and Performance Analysis for Direct-Type Lead Exit of UHV Transformer (ID:636) ( abstract ) |
| 11:15 | Influence of Design Parameters on Characteristics of External-Rotor Permanent Magnet Synchronous Machine (ID:046) ( abstract ) |
11:15-12:45 Session 7H: Magnetic Materials for Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | Measurement, Modeling and Simulation on Magnetostrictive Properties of Magneto-Rheological Elastomers (ID:723) ( abstract ) |
| 11:15 | Research on the Magnetic Hysteresis of Soft Magnetic Composite Material (ID:801) ( abstract ) |
| 11:15 | Design of a Distributed Winding on a Ceramic Carrier for an Ironless, High Speed Axial-Flux PM-Machine (ID:395) ( abstract ) |
| 11:15 | Research of the Amorphous Alloy Transformer with Runway Shape Winding Based on the Magnetic-Vibration-Noise Coupling Calculation Method (ID:454) ( abstract ) |
| 11:15 | Stress Analysis of Motor Cores Based on the Measurement of Magnetostriction of Non-oriented Silicon Steel Sheet (ID:507) ( abstract ) |
| 11:15 | Magnetic Properties Analysis of the Soft Ferrites Cores in High Frequency Transformer under Non-Sinusoidal Excitations (ID:709) ( abstract ) |
| 11:15 | Influence of Electrical Steel Characteristics on Efficiency of Industrial Induction Motors (ID:618) ( abstract ) |
| 11:15 | Core Losses Calculation of Nanocrystalline Alloy High Frequency Transformer Considering Magnetic Hysteresis Effects (ID:790) ( abstract ) |
| 11:15 | Study on Topology of Magnetic Gear Considering shape of Pole Piece (ID:832) ( abstract ) |
| 11:15 | Design and Analysis of Axial Flux Permanent Magnet Motor for Electric Bicycles with Hybrid Stator Core (ID:779) ( abstract ) |
11:15-12:45 Session 7I: Power Electronics for Renewable Energy Systems
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | Load frequency control using H infinity control in case of considering PV (ID:762) ( abstract ) |
| 11:15 | Implementation of Genetic Algorithm-Based SHE for a Cascaded Half-Bridge Multilevel Inverter Fed from PV Modules (ID:206) ( abstract ) |
| 11:15 | A Three-Phase Cascaded H-Bridge Quasi-Switched Boost Inverter for Renewable Energy System (ID:482) ( abstract ) |
| 11:15 | Research of a Double-Galfenol-Rods Magnetostrictive Transducer (ID:289) ( abstract ) |
| 11:15 | A Flexible Topology Converter for Photovoltaic Micro-inverter (ID:076) ( abstract ) |
| 11:15 | 50kW-class integral transformer / reactor design for solar PCS to improve power density (ID:309) ( abstract ) |
| 11:15 | An Integrated Boost Three-phase Half-bridge Converter (ID:053) ( abstract ) |
| 11:15 | Comparison and Analysis of a Novel Passive Damping for LCL Filtered Voltage Source Inverters (ID:172) ( abstract ) |
| 11:15 | Vector Control with d-q Transformation Self-correction for Stand-alone Brushless Doubly Fed Induction Generator Power System (ID:637) ( abstract ) |
| 11:15 | An Improved Single-stage Buck-boost Grid-connected Inverter (ID:795) ( abstract ) |
11:15-12:45 Session 7J: Analysis, Design and Control of Renewable Energy Systems
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | Power Gain by Series Voltage Compensation (ID:159) ( abstract ) |
| 11:15 | Input Current Ripple Reduction and High Efficiency for PEM Fuel Cell Power Conditioning System (ID:658) ( abstract ) |
| 11:15 | Management of Solar Energy in Microgrids Using IoT-Based Dependable Control (ID:758) ( abstract ) |
| 11:15 | Design And Analysis of 50KW Dual - Stator Brushless Doubly - Fed Generator for Wind Turbine (ID:738) ( abstract ) |
| 11:15 | Design and Analysis of Dual-Stator HTS Reluctance-Rotor Brushless Doubly-Fed Wind Generator (ID:743) ( abstract ) |
| 11:15 | Application of Hysteretic Current-mode Control Technology for Electrostatic Precipitator (ID:087) ( abstract ) |
| 11:15 | Design and Simulation of Multi-Energy Hybrid Power System Based on Wave and Wind Energy (ID:647) ( abstract ) |
| 11:15 | State-of-Charge Monitoring of a Lithium Iron Phosphate Battery at Various Temperatures (ID:490) ( abstract ) |
| 11:15 | The Joint Simulation of a Stand-Alone Photovoltaic System Based on PSIM and Matlab (ID:760) ( abstract ) |
| 11:15 | Excitation Control System of Large -capacity Energy Storage Generator with an Dynamic DC Load (ID:557) ( abstract ) |
13:45-15:15 Session 8A: Control in Electric Machines
Oral Presentations
Chairs:
Location: Cockle Bay Room 2, ICC
| 13:45 | Torque Control of Permanent Magnet Synchronous Motor Using Flux Vector (ID:310) ( abstract ) |
| 14:00 | Eccentricity Fault Analysis in PMSM based Marine Propulsion Motors (ID:347) ( abstract ) |
| 14:15 | Improved Model Predictive Torque Control of Permanent Magnet Synchronous Motor with Duty Ratio Optimization and Cost Function Correction (ID:558) ( abstract ) |
| 14:30 | Optimal Design and Vector Control of an Interior Ferrite Permanent Magnet Synchronous Motor (ID:462) ( abstract ) |
| 14:45 | A Fuzzy Clustering Algorithm-Based Dynamic Equivalent Modeling Method for All-DC Offshore Wind Farm with permanent magnet synchronous generators (ID:711) ( abstract ) |
| 15:00 | A High Performance feed-forward Control of the Permanent Magnet Synchronous Motor for the Pitch Control System in Wind Turbine (ID:778) ( abstract ) |
13:45-15:15 Session 8B: Electric Machines for Renewable Energy Generation
Oral Presentations
Chairs:
Location: Meeting Room C3.1, ICC
| 13:45 | Influence of Load on Discharge Performance of high-speed Flywheel Energy Storage System (ID:555) ( abstract ) |
| 14:00 | Influence of winding layout and airgap length on radial forces in large synchronous hydrogenerators (ID:407) ( abstract ) |
| 14:15 | Study on the Nonlinear Characteristics of the Inclined Self-circulating Evaporative Cooling System for Wind Power Generator (ID:540) ( abstract ) |
| 14:30 | Output Power Smoothing Control for the PMSG Based Wind Farm by Using the Allocation of the Wind Turbines (ID:055) ( abstract ) |
| 14:45 | Optimization and Performance of Linear PM-Assisted Reluctance Synchronous Machine for Wave Energy Generation (ID:003) ( abstract ) |
13:45-15:15 Session 8C: Magnetic Materials for Machines
Oral Presentations
Chairs:
Location: Meeting Room C3.2, ICC
| 13:45 | Multi Magnetic Material Laminated Cores: Concept and Modelling (ID:463) ( abstract ) |
| 14:00 | Frequency-dependent complex magnetic permeability and magnetic losses of Fe-Ga alloy (ID:365) ( abstract ) |
| 14:15 | Cogging Torque Minimization of SMC Motor with Axially Tapered Stator Tooth Tip (ID:639) ( abstract ) |
| 14:30 | Design and Analysis of a Novel 2-D Magnetization Structure for Magnetic Properties Measurement in Wide Range of Frequency (ID:587) ( abstract ) |
| 14:45 | Approach to Increase the Measurement Accuracy of Magnetic Characteristic of Open Circuit Test Sample Material (ID:373) ( abstract ) |
| 15:00 | Role of Advanced Materials in Electrical Machines (ID:024) ( abstract ) |
13:45-15:15 Session 8D: High Power Converters
Oral Presentations
Chairs:
Location: Meeting Room C3.4, ICC
| 13:45 | Harmonic Mitigation of a Grid-connected Photovoltaic System using Shunt Active Filter (ID:693) ( abstract ) |
| 14:00 | A Sag and Harmonic compensation Method without Harmonic Detection for Dynamic Voltage Restorer (ID:691) ( abstract ) |
| 14:15 | Capacitor Voltages Balancing of a Symmetrical Hybrid Nine-Level Inverter with reduced voltage sensors (ID:252) ( abstract ) |
| 14:30 | Zero-Voltage-Transition Interleaved Bi-directional Low Voltage DC–DC Converter with Switching Frequency Modulation for MHEV (ID:460) ( abstract ) |
| 14:45 | Current Control for H6 Topology Based PV Inverter subject to Grid Voltage Harmonics (ID:208) ( abstract ) |
| 15:00 | An Improved Phase-Shifted PWM Method for a Symmetrical Hybrid Nine-Level Inverter (ID:476) ( abstract ) |
13:45-15:15 Session 8E: Microgrids (Power System)
Oral Presentations
Chairs:
Location: Meeting Room C3.5, ICC
| 13:45 | A Voltage Ripple Suppression Method of DC Microgrid Under Unbalanced Load (ID:333) ( abstract ) |
| 14:00 | Multi-Area Economic Emission Dispatch Considering Load Uncertainty (ID:307) ( abstract ) |
| 14:15 | Large Signal Stability Analysis of the DC Microgrid with the Storage System (ID:327) ( abstract ) |
| 14:30 | A New Protection Scheme for DC Substation System Based on Single-ended Measurement (ID:243) ( abstract ) |
| 14:45 | An Improved Strategy of Aviation Power Generation System Based on Dual Excitation Control (ID:286) ( abstract ) |
| 15:00 | Static Var Compensator Allocation Considering Transient Stability, Voltage Profile and Losses (ID:306) ( abstract ) |
13:45-15:15 Session 8F: Losses and Thermal Management of Electric Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Rotor Loss Calculation and Thermal Analysis of a Dual-Stator Axial-Flux Permanent Magnet Machine with Combined Rectangle-Shaped Magnets (ID:722) ( abstract ) |
| 13:45 | Experimental and Theoretical Study of Interlaminar Eddy Current Loss in Laminated Cores (ID:623) ( abstract ) |
| 13:45 | Fast Thermal Analysis of an ISG in Hybrid Electric Vehicle Drive System (ID:383) ( abstract ) |
| 13:45 | Field-Circuit Coupled Time-Stepping Finite Element Analysis of Rotating Core Loss for Induction Motor (ID:601) ( abstract ) |
| 13:45 | Arc Characteristic Analysis of Railway Vehicle according to Excitation Frequency using Simulator of Contact Loss (ID:542) ( abstract ) |
| 13:45 | The analysis of eddy current loss in HSPMSM with improved experimental method based on drag system (ID:054) ( abstract ) |
| 13:45 | The Influence on Trust of a Down-to-hole Tubular Permanent Magnet Linear Hammer due to High Temperature in Deep Hole (ID:664) ( abstract ) |
| 13:45 | Research of the influence of Third Harmonic Injection PWM Inverters on Iron Losses of Induction Motors (ID:886) ( abstract ) |
| 13:45 | Reduction Permanent Magnet Eddy Current Loss of PMSM in Flywheel Energy Storage System for Uninterruptable Power Supply (ID:562) ( abstract ) |
13:45-15:15 Session 8G: Losses and Thermal Management of Electric Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Rotor Design and Optimizations for Interior Permanent Magnet Machines in Motorized Spindle Application (ID:611) ( abstract ) |
| 13:45 | Non-rotating High-accuracy Iron Loss Measurements on Motor Stator Stacks (ID:660) ( abstract ) |
| 13:45 | Loss Reduction of Permanent Magnet Synchronous Machines based on Decoupling Control Strategy during Dynamic Processes (ID:654) ( abstract ) |
| 13:45 | Lumped-Parameter Thermal Model and Testing of Permanent Magnet Machine (ID:259) ( abstract ) |
| 13:45 | Loss and Thermal Estimation Method of a Magnetic Bearing System Considering Electromagnetic and Temperature Coupling (ID:461) ( abstract ) |
| 13:45 | Calculation and Analysis of the Hot-Spot Temperature-rise for Large Power Transformer Based on 3D Electromagnetic-Fluid-Thermal Coupling Method (ID:470) ( abstract ) |
| 13:45 | Segmented Lamination Stator Optimization of Linear Oscillating Motor Based on Magnetic Field and Thermal Network Coupling Analysis (ID:783) ( abstract ) |
| 13:45 | Research on the flow characteristics of different cooling medium in the inner evaporative cooling turbo-generator (ID:617) ( abstract ) |
| 13:45 | Design of Control System for 1000MW Megawatt - class Evaporative Cooling Water Turbine Generator based on LabVIEW (ID:372) ( abstract ) |
| 13:45 | Study and Design of Low-Speed Direct-Driven Permanent Magnet Synchronous Machines(PMSM) for Fan Used on Power Air Cooling Island (ID:186) ( abstract ) |
13:45-15:15 Session 8H: Permanent Magnet Synchronous Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Practical Aspects of Implementing Skew Angle to Reduce Cogging Torque for the Mass-production of Permanent Magnet Synchronous Motors (ID:227) ( abstract ) |
| 13:45 | Influence of Auxiliary Slot on Electromagnetic Vibration in PMSM with Similar Slot and Pole Number (ID:290) ( abstract ) |
| 13:45 | Trade-Off with Starting Capability to Maximize Efficiency of a Single-Phase Line-Start Permanent Magnet Motor (ID:293) ( abstract ) |
| 13:45 | Airgap Magnetic Field Estimation for IPM Rotors Considering Their Non-Uniform Local Saturation (ID:496) ( abstract ) |
| 13:45 | A Novel Flux Reversal PM Machine with Halbach Array Magnets in Stator Slot Opening (ID:754) ( abstract ) |
| 13:45 | Electrical Field Generation by High Speed Rotation of a Bipole Magnet Configuration for Nerve Activation (ID:776) ( abstract ) |
| 13:45 | Magnetic Field Analysis of Hybrid Driven Permanent Magnet Multi-DOF Motor (ID:030) ( abstract ) |
| 13:45 | Design and Analysis of a Single-Phase Oscillating Permanent-Magnet Linear Machine (ID:926) ( abstract ) |
| 13:45 | No-Load Magnetic Field Distribution in Axial Flux Permanent Magnet Machine with Static Eccentricity (ID:725) ( abstract ) |
| 13:45 | Comparative Study of Double-Sided Toroidal-Winding Linear PM Vernier Machines with Different Secondary Configurations (ID:082) ( abstract ) |
| 13:45 | Design of Spoke-Type Ferrite Interior Permanent Magnet Synchronous Machines Considering the Number of Poles (ID:671) ( abstract ) |
13:45-15:15 Session 8I: Microgirds (Power Electronics)
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Multi-cell DC-DC Converter based Solid-State Transformer Design Featuring MV grid tie applications (ID:202) ( abstract ) |
| 13:45 | Predictive Control for Single-Phase Multi-Module UPS Inverters with Output LC filter Modeling (ID:354) ( abstract ) |
| 13:45 | Multinomial Model of Droop Control Method for Parallel-Connected UPS Inverters (ID:456) ( abstract ) |
| 13:45 | Design, Analysis and Control of a Magnetically-coupled Multi-port Multi-operation Mode Residential Micro-grid (ID:768) ( abstract ) |
| 13:45 | Parallel-connected Two-generator Model Following Control for Grid-Interconnected Inverter (ID:784) ( abstract ) |
| 13:45 | A Second-Order Generalized Differentiator Method for Eliminating DC Component in the Three-Phase PLL for Grid-Connected Inverters (ID:125) ( abstract ) |
| 13:45 | An Enhanced Control Strategy for Seamless Transfer of Grid-connected Single-Phase Inverter in Synchronous Rotating Frame (ID:481) ( abstract ) |
| 13:45 | New Single Phase PLL Control Method for Electric Railway Converter System (ID:205) ( abstract ) |
| 13:45 | Application of Virtual Synchronous Generator Technology in Three-Phase Four-Leg Inverter (ID:610) ( abstract ) |
13:45-15:15 Session 8J: Operation of Magnets and Machinery
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Feed Rate Fluctuation Compensating NURBS Interpolator for CNC Machining (ID:158) ( abstract ) |
| 13:45 | The Effect of Spray Parameter on Heat Dissipation in Spray Evaporatvie Cooling High Power Density Motors (ID:179) ( abstract ) |
| 13:45 | Research on the Two Phase Flow of Evaporative Cooling System In Higher Power Density ECRIS Magnet (ID:261) ( abstract ) |
| 13:45 | Design of lower vibration reactors (ID:468) ( abstract ) |
| 13:45 | Heat Dissipation Evaluation and Optimization of Air Cooling Induction Motor Used for Mini Electric Vehicle (ID:752) ( abstract ) |
| 13:45 | Improved Analytical Model of Hyperelastic Magnetic Membranes (ID:770) ( abstract ) |
| 13:45 | A Study on the Skin Effect and Eddy Current Distributions in Conductive Media (ID:242) ( abstract ) |
| 13:45 | Research on Temperature Field Simulation of Dry Type Air-Core Reactor (ID:019) ( abstract ) |
| 13:45 | Temperature Characteristics Analysis of IPMSM according to Stator Design Parameter (ID:764) ( abstract ) |
| 13:45 | A Proposal of Magnetic Levitation System Without Using Sideslip-Sensors and Actuators in Guidance Control (ID:099) ( abstract ) |
15:30-17:00 Session 9A: Magnetic Materials for Machines
Oral Presentations
Chairs:
Location: Cockle Bay Room 2, ICC
| 15:30 | Design of a novel high frequency 2-D magnetic tester with nanocrystalline material considering stress effects (ID:708) ( abstract ) |
| 15:45 | Measurement of Magnetic Properties of Soft Magnetic Composite Materials at High Frequencies and High Flux Densities (ID:021) ( abstract ) |
| 16:00 | Studies on Grain-Oriented Silicon Steel Used in Traction Motors (ID:576) ( abstract ) |
| 16:15 | Experiment Research on Motor Efficiency Improvement through the Eddy Current Reduction using Segmentation of Rotor Magnet (ID:278) ( abstract ) |
| 16:30 | Post-assembly magnetization of High Speed PM Rotor with Metallic Sleeve (ID:821) ( abstract ) |
| 16:45 | Soft Magnets Implementation using a Stereolithography 3d Printer (ID:546) ( abstract ) |
15:30-17:00 Session 9B: Electric Machine Analysis and Design
Oral Presentations
Chairs:
Location: Meeting Room C3.1, ICC
| 15:30 | Analysis and Experimental Study of a Novel Self-Differential Eddy Current Sensor for High-Speed Magnetic Electrical Machine (ID:204) ( abstract ) |
| 15:45 | Influence of Stator Slot and Pole Number Combination on Rotor Bar Current Waveform and Performance of Induction Machines (ID:036) ( abstract ) |
| 16:00 | High Specific Power Electrical Machines: A System Perspective (ID:029) ( abstract ) |
| 16:15 | Influence of Rotor Slot Number on Rotor Bar Current Waveform and Electromagnetic Performance of Induction Machines (ID:035) ( abstract ) |
| 16:30 | Evaluation of Iron Loss Models in Electrical Machines (ID:034) ( abstract ) |
15:30-17:00 Session 9C: Interior Permanent Magnet Machines
Oral Presentations
Chairs:
Location: Meeting Room C3.2, ICC
| 15:30 | Filter Setting for Improving Torque Control Performance of IPMSMs in Overmodulation Region of Inverter (ID:684) ( abstract ) |
| 15:45 | Cogging Torque and Torque Ripple Reduction of Interior Permanent Magnet Machines by Using Asymmetric Flux-Barriers (ID:368) ( abstract ) |
| 16:00 | Prediction and Evaluation of PWM-Induced Current Ripple in IPM Machines Incorporating Slotting, Saturation, and Cross-Coupling Effects (ID:403) ( abstract ) |
| 16:15 | A Comparative Study of Optimally Designed V-Shaped Magnet IPM Synchronous Motors (ID:410) ( abstract ) |
| 16:30 | Restarting with Speed for IPMSM Based on Hybrid Synchronized PWM Control Schemes for Rail Train Traction System (ID:346) ( abstract ) |
15:30-17:00 Session 9D: Motor Drives
Oral Presentations
Chairs:
Location: Meeting Room C3.4, ICC
| 15:30 | Sliding-Mode MRA Observer-based Model Predictive Current Control for PMSM Drive Systems with DC-link voltage Sensorless (ID:157) ( abstract ) |
| 15:45 | An Efficient Two-Vector-Based Model Predictive Control for Induction Motor Drives (ID:675) ( abstract ) |
| 16:00 | A Study on the LCC Analysis of GTO in the Main Conversion System in 8200 series Electric Locomotive (ID:519) ( abstract ) |
| 16:15 | A Study of Design Method of Full-Order Observer based on Extended Electromotive Force for Position Sensorless Control of IPMSMs (ID:512) ( abstract ) |
| 16:30 | The Research on the Current Source Controller of Asynchronous Motor (ID:059) ( abstract ) |
| 16:45 | Position Sensorless Control of Synchronous Reluctance Motors at Very Low Speeds Region Using High-frequency Current Control System (ID:086) ( abstract ) |
15:30-17:00 Session 9E: Thermal and Mechanical Analysis
Oral Presentations
Chairs:
Location: Meeting Room C3.5, ICC
| 15:30 | Optimization Design of Heat Dissipation Structure of Integrated Motor Drives for Application in Aerospace (ID:847) ( abstract ) |
| 15:45 | Design and Construction of a Single-Arm Crane Miniature for Stevedoring (ID:353) ( abstract ) |
| 16:00 | Mechanical Characteristics Analysis of Defective Transformer Windings under Short-Circuit Fault Using 3-D FEM (ID:843) ( abstract ) |
| 16:15 | Thermal investigation on HSPM with new alloy sleeve (ID:733) ( abstract ) |
| 16:30 | Optimized passive thermal management for battery pack (ID:028) ( abstract ) |
15:30-17:00 Session 9F: Optimization of Electric Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | Performance Analysis and Optimization of Permanent Magnet Synchronous Motor Based on Deep Learning (ID:571) ( abstract ) |
| 15:30 | Analysis and Optimization of a New 2-D Magnet Array for Linear and Rotary Actuator (ID:880) ( abstract ) |
| 15:30 | Efficiency Improvement of a 12-Pole 17.5 kW Induction Motor Using Converter-fed Wound Rotor (ID:253) ( abstract ) |
| 15:30 | Optimization of External Rotor Surface Permanent Magnet Machines Based on Efficiency Map over a Target Driving Cycle (ID:102) ( abstract ) |
| 15:30 | Multi-Step Optimization Method for the Design of Electric Machines Using Shape and Topology Optimization (ID:827) ( abstract ) |
| 15:30 | Multi-objective Optimization of IPMSM based on Subspace Division (ID:655) ( abstract ) |
| 15:30 | A Novel Plasma-Inspired Global Optimization Algorithm Applied to a Permanent Magnet Synchronous Motor Design (ID:813) ( abstract ) |
| 15:30 | Research on Optimization Algorithm of BP neural network for permanent magnet synchronous motor based on Cloud Computing (ID:322) ( abstract ) |
| 15:30 | Optimal Design of Rotor Topology of PM Synchronous Machine for High Speed Electric Tools (ID:164) ( abstract ) |
| 15:30 | Data Interpolation based on Neural Network for Optimal Design of Interior PM Synchronous Machine (ID:816) ( abstract ) |
15:30-17:00 Session 9G: Electric Machine Analysis and Design
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | Performance Analysis of Electromagnet Actuator with Different Structures (ID:862) ( abstract ) |
| 15:30 | Investigation of Crosscoupling effect of a 3-DOF Magnetic Bearing Using Magnetic Circuit Method (ID:473) ( abstract ) |
| 15:30 | Design of a Three Dimensional Magnetic Field Measurement System for TMS Pre-Testing (ID:682) ( abstract ) |
| 15:30 | A Direct Drive Linear Actuator for a Heliostat Tracking System (ID:085) ( abstract ) |
| 15:30 | Design and Experiment of Surface-Mounted Permanent-Magnet Motors with Integrated Magnetizing Windings (ID:819) ( abstract ) |
| 15:30 | Interior Permanent-Magnet Motor with a Novel Tangential-Magnetic Rotor for Applying to Refrigerant Compressor (ID:042) ( abstract ) |
| 15:30 | Magnetic Field Analysis and Optimum Design of Adjustable Magnetic Liquid Damper (ID:586) ( abstract ) |
| 15:30 | Comparative Study of Integrated Radial-Axial Flux Rotor Motor using Ferrite Magnet (ID:681) ( abstract ) |
| 15:30 | A Novel Doubly-Fed Flux-Modulation Machine for Electric Vehicle Propulsion (ID:452) ( abstract ) |
| 15:30 | Stable Operation Region Analysis of Direct Torque Control System for Permanent Magnet Synchronous Motor (ID:520) ( abstract ) |
| 15:30 | A Sensorless Control of Surface-mount Permanent Magnet Synchronous Motor Based on Rotor Flux Estimation (ID:117) ( abstract ) |
15:30-17:00 Session 9H: Electric Machine Analysis and Design
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | Verification for Improved Load Sequence Logic of Emergency Diesel Generator (ID:299) ( abstract ) |
| 15:30 | Design of DC Electromagnetic Pump and Performance Analysis (ID:111) ( abstract ) |
| 15:30 | Analysis of Electromagnetic Exciting Force of Marine Permanent Magnet Propulsion Motor Based on Finite Element Method (ID:175) ( abstract ) |
| 15:30 | Complex Vector Modelling and Simulation of Dual Stator-Winding Induction Machine (ID:248) ( abstract ) |
| 15:30 | Investigation of High Power Density Permanent Magnet Integrated Starter/Generator Based on Dual Air-Gap Design (ID:445) ( abstract ) |
| 15:30 | Traction-system Research Based on Different Proportion of Current in Double-end Supply for High-speed Maglev (ID:487) ( abstract ) |
| 15:30 | Design and Realization of a Novel Visual Educating Device for Rotating Magnetic Fields (ID:508) ( abstract ) |
| 15:30 | Analysis on Method of Calculating Transformer Residual Flux by Using the Integration of Port-voltage Waveform and its Implementation (ID:554) ( abstract ) |
| 15:30 | Design of a Ferrite PM Assisted-Synchronous Sever Motor (ID:521) ( abstract ) |
15:30-17:00 Session 9I: DC/DC and AC/DC Converters
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | Stabilization of a Cascaded AC/DC System Based on Small Signal Analysis (ID:045) ( abstract ) |
| 15:30 | Synchronized PWM Schemes for Discrete-Time Complex Vector Current Regulator of High Power Rectifier (ID:370) ( abstract ) |
| 15:30 | A Study on Phase Shift Full Bridge Zero-Voltage-Switching PWM Converter (ID:397) ( abstract ) |
| 15:30 | A Virtual Platform for the Performance Analysis of the LLC Resonant Converter for Magnetron in Microwave Oven (ID:864) ( abstract ) |
| 15:30 | A Design of Single Phase Converter with Active Power Factor Correction Module (ID:215) ( abstract ) |
| 15:30 | Consistently Achieving Lowest Losses with Dual-Loop Finite-Settling-Step DC-to-DC Converter Control by Using Real-Time Parameter Estimation (ID:280) ( abstract ) |
| 15:30 | Nonlinear PR Control Strategy for Cascaded H-Bridge Rectifier Based on State Feedback Linearization (ID:416) ( abstract ) |
| 15:30 | The SVPWM and PR Control for Single-phase Three-level Rectifier (ID:152) ( abstract ) |
| 15:30 | The Study of dead-time commutation and compensation in Dual Bridge Series Resonant DC/DC Converter (ID:238) ( abstract ) |
| 15:30 | A Novel Semiconductor Switch Test Circuit for Power Converter Optimization (ID:325) ( abstract ) |
15:30-17:00 Session 9J: Transients and Stability of Power System
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | Adaptive Multi-Variable Coordinated Control and Safe Operating Characteristics for MMC under Unbalanced AC Grid (ID:160) ( abstract ) |
| 15:30 | Inertia Control of DFIG-Based Wind Turbines for Interconnected Power System Stability Enhancement (ID:883) ( abstract ) |
| 15:30 | Non-intrusive Load Identification Method Based on Residents' Behavior and Improved Discrete Optimization Algorithm of Chickens (ID:599) ( abstract ) |
| 15:30 | Analysis of Voltage Variation in LVDC distribution System with Load Variability (ID:884) ( abstract ) |
| 15:30 | The Effect of Load Condition on Dynamic Response Capability of Synchronous Condenser (ID:642) ( abstract ) |
| 15:30 | Analysis on Recursive Discrete Fourier Transform FLL Based on Delayed Signal Cancellation-PLL Method under Frequency Variations (ID:662) ( abstract ) |
| 15:30 | Frequency Control of Power System with Large Scale Wind Farm Installed by HVDC Interconnection and Battery Systems (ID:715) ( abstract ) |
| 15:30 | An Improved Synchronous Reference Frame Phase-Locked Loop for Stand-Alone Variable Speed Constant Frequency Power Generation Systems (ID:650) ( abstract ) |
| 15:30 | Stability Analysis of DFIG with SWITSC Fault in Weak Network (ID:127) ( abstract ) |
18:00-21:00 Session : Conference Dinner
Location: Parkside 1, ICC
Monday, August 14th
View this program: with abstractssession overviewtalk overview
09:00-11:00 Session 10: Plenary Session
-
Professor Ping Zheng, “Key Technologies of Compound-Structure Permanent-Magnet Synchronous Machines for Hybrid Electric Vehicles”
-
Professor Sang-Yong Jung, “Design Optimization of IPMSM for Electric Vehicle Propulsion in Terms of NVH Characteristics and Energy Consumption”
-
Professor Po-Tai Cheng, “Medium Voltage Power Electronics in the Smart Grid Applications”
Chair:
Location: Cockle Bay Room 2, ICC
11:15-12:45 Session 11A: Electric Machine Analysis and Design
Oral Presentations
Chairs:
Location: Cockle Bay Room 2, ICC
| 11:15 | Research on a Tubular Flux-Switching Permanent-Magnet Linear Machine (ID:925) ( abstract ) |
| 11:30 | Study on Electromagnetic Force Ripple Reduction of Long Stator Linear Synchronous Motor Based on Unequal Pole Pitch (ID:105) ( abstract ) |
| 11:45 | A Simplified Model Predictive Control to Eliminate Common Mode Voltage of an AC Motor Fed by a Neutral Point Clamped Inverter (ID:870) ( abstract ) |
| 12:00 | Improving Magnetic Gearbox Overload Torque with Cage Rotor Bars (ID:539) ( abstract ) |
| 12:15 | Multi-Physics Optimization of Air-Cooled Asynchronous Induction Machines for Railway Traction Drives (ID:363) ( abstract ) |
| 12:30 | Influence Research of Rotor Structure Parameters on the Performance of IPMSM (ID:240) ( abstract ) |
11:15-12:45 Session 11B: Control in Electric Machines
Oral Presentations
Chairs:
Location: Meeting Room C3.1, ICC
| 11:15 | Control strategy of Integrated Charger base on Split-winding Switched Reluctance Motor Drive (ID:661) ( abstract ) |
| 11:30 | Control of a High Efficiency Generator with PM Exciter Using Frequency Weight Factor (ID:331) ( abstract ) |
| 11:45 | Control Strategy for Harmonic Elimination in Stand-alone Dual-Stator Brushless Doubly Fed Induction Generators with Nonlinear Loads (ID:115) ( abstract ) |
| 12:00 | Vortex Generation and Control in Baffling Housing of a Weather Protected Motor (ID:027) ( abstract ) |
| 12:15 | A Bearingless Induction Motor Speed Identification Based on Sliding Mode Variable Structure-Model Reference Adaptive System (ID:446) ( abstract ) |
11:15-12:45 Session 11C: Sensored and Sensorless Control of Electric Machines
Oral Presentations
Chairs:
Howard Lovatt and Wei Xu
Location: Meeting Room C3.2, ICC
| 11:15 | A Sensorless Vector Control of Brushless Doubly Fed Machine for Stand-alone Generator System (ID:882) ( abstract ) |
| 11:30 | Sensorless Control of Induction Motors using an Extended Kalman Filter and Linear Quadratic Tracking (ID:493) ( abstract ) |
| 11:45 | Extended State Observer-based Vector Control for PMSM Drive System with Single Phase Current Sensor (ID:919) ( abstract ) |
| 12:00 | Estimation of disturbance torque for ballscrew drive system with using high resolution encoder (ID:296) ( abstract ) |
| 12:15 | Sensorless Direct Voltage Control of the Stand-Alone Brushless Doubly-Fed Generator (ID:303) ( abstract ) |
11:15-12:45 Session 11D: Motor Drives
Oral Presentations
Chairs:
Location: Meeting Room C3.4, ICC
| 11:15 | Novel DC-Link Voltage Variation Method for Interior Permanent Magnet Synchronous Motor Drive System with High-Efficient DC-DC Converter (ID:402) ( abstract ) |
| 11:30 | High Gain Single Stage Buck-Boost Inverter (ID:380) ( abstract ) |
| 11:45 | The Control Strategy of the Nine-Switch Converter for Dual Stator Doubly Salient Electro-magnet driving system (ID:173) ( abstract ) |
| 12:00 | Calculation of Converter losses for Switched Reluctance Motor (ID:916) ( abstract ) |
| 12:15 | Synchronous Reluctance Machine with Multiphase Stator Cage Winding (ID:891) ( abstract ) |
| 12:30 | The research on PMSM dynamic speed control method used in the follow-up control system (ID:066) ( abstract ) |
11:15-12:45 Session 11E: Applications of Electromagnetism
Oral Presentations
Chairs:
Location: Meeting Room C3.5, ICC
| 11:15 | Electromagnetic and Thermal Design of Superconducting Fault Current Limiters for DC Electric Systems using Superconducting Cables (ID:873) ( abstract ) |
| 11:30 | Design Optimization of a Novel Electromagnetic Clutch System Based on Dynamic Analysis (ID:153) ( abstract ) |
| 11:45 | Sensorless Position Control of Novel Electromagnetic Linear Actuator for Tactile Display (ID:345) ( abstract ) |
| 12:00 | FEM for Sub-span Oscillation of Bundle Conductor Lines Considering Electromagnetic Forces (ID:032) ( abstract ) |
| 12:15 | Research on Electromagnetic Detection emission System for Spread Spectrum Code (ID:257) ( abstract ) |
11:15-12:45 Session 11F: Electric Machine Analysis and Design
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | Electromagnetic Performance Comparison of 18-slot/26-pole and 18-slot/10-pole Fractional Slot Permanent Magnet Surface-Mounted Machines (ID:666) ( abstract ) |
| 11:15 | 3-D Dynamic Simulation of an Integrated Levitation, Guidance and Propulsion System by a Superconducting Transverse Flux Linear Motor (ID:067) ( abstract ) |
| 11:15 | Design and Analysis of a Bearingless Doubly Salient Permanent Magnet Machine (ID:745) ( abstract ) |
| 11:15 | Characteristic analysis of the cryogenic permanent magnet synchronous motor for the submerged LNG pump (ID:748) ( abstract ) |
| 11:15 | Torque Ripple and Back EMF Harmonic Reduction of IPMSM with Asymmetrical Stator Design (ID:811) ( abstract ) |
| 11:15 | Design of Interior Permanent Magnet Synchronous Machine for Torque Characteristic Improvement by Leakage Flux Reduction (ID:590) ( abstract ) |
| 11:15 | Design Optimization of Interior PM Starter-Generator for Aerospace Applications (ID:471) ( abstract ) |
| 11:15 | Optimization Design and Analysis of Permanent magnet synchronous motor based on VC (ID:060) ( abstract ) |
| 11:15 | Design and Analysis of Low-Speed High Torque Direct-Driven Permanent Magnet Synchronous Machines(PMSM) with Fractional-Slot Concentrated Winding Used in Coal Mine Belt Conveyor System (ID:185) ( abstract ) |
| 11:15 | Model Predictive Thrust Control on Parallel-connected Double-sided Linear Induction Motor (ID:097) ( abstract ) |
11:15-12:45 Session 11G: Electric Machine Analysis and Design
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | Computational and Experimental Segregation of Deformations due to Magnetic Forces and Magnetostriction (ID:514) ( abstract ) |
| 11:15 | An End-Effect Equivalent Factor for back-EMF Analysis of PMSM (ID:543) ( abstract ) |
| 11:15 | Performance Calculation for a Canned Solid-Rotor Induction Motor with Squirrel-cage (ID:593) ( abstract ) |
| 11:15 | Fractional Order Model of Three-winding Series-connected Single-phase Motor (ID:613) ( abstract ) |
| 11:15 | Research on the Simulation of Vacuum Arc under Low Current Interruption (ID:902) ( abstract ) |
| 11:15 | Analysis of Torque and Eddy Current Characteristics for Induction Motor using Equivalent Circuit and Field Parameters (ID:712) ( abstract ) |
| 11:15 | Study on Planar Coil with Multi-Frequency Stimulations Applied to an Eddy Current Non-Destructive Testing (ID:605) ( abstract ) |
| 11:15 | Investigation of a Novel 2-D Halbach Magnet Array for Magnetically Levitated Planar Motor (ID:849) ( abstract ) |
| 11:15 | Calculating the Transient Electromagnetic Phenomena of the Truss Bridge by Direct Lightning Strikes (ID:771) ( abstract ) |
| 11:15 | The Modal Analysis of the Stator of the Interior Permanent Magnet Machine (ID:594) ( abstract ) |
| 11:15 | A New Regression Modeling Method for PMSLM Design Optimization Based on K-Nearest Neighbor Algorithm (ID:339) ( abstract ) |
11:15-12:45 Session 11H: Electric Machine Analysis and Design
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | Effect of Stator and Rotor Notches on Cogging Torque of Permanent Magnet Synchronous Motor (ID:009) ( abstract ) |
| 11:15 | Joint Temperature Prediction Method for Segment-powered Linear Motor with Working Condition Based on Nonlinear Autoregressive with Exogenous Input Neural Network (ID:536) ( abstract ) |
| 11:15 | Comparison of Torque Characteristic between Two Transverse Flux Motors with Passive External Rotor Structure (ID:255) ( abstract ) |
| 11:15 | Rotor Strength Analysis for Stator-Permanent Magnet Electrical Machines (ID:750) ( abstract ) |
| 11:15 | Design and Characteristic Analysis of High-Speed High Temperature Superconducting Maglev Train (ID:607) ( abstract ) |
| 11:15 | Impedance-Model-Based SSR Study considering DFIGs at Different Locations (ID:013) ( abstract ) |
| 11:15 | Torque Ripple Mitigation of PM-assisted Synchro-Reluctance Machine : Design and Optimization (ID:213) ( abstract ) |
| 11:15 | A Discrete Elements Model for Ironless DC-Machines with Graphite Brushes (ID:685) ( abstract ) |
| 11:15 | Tradeoffs in High-Speed Performance Characteristics in Optimization of Saliency Ratio and Efficiency for Designing FSCW IPM Machines (ID:670) ( abstract ) |
| 11:15 | Design and Analysis of a Novel Modular Six-Phase Linear Primary Permanent-Magnet Vernier Machine (ID:123) ( abstract ) |
| 11:15 | Model Predictive Torque Control of an Open-End Winding PMSM with Reduced Computation Time (ID:559) ( abstract ) |
11:15-12:45 Session 11I: Inverters, Matrix Converters and Control
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | A Comprehensive Study of Relationship of Two Simplified Space Vector Modulation Methods and the Application in NPC Three-level Inverters (ID:061) ( abstract ) |
| 11:15 | Comparison of DC/DC Converters in DCM for Reducing Low-Frequency Input Current Ripple of Single-Phase Two-Stage Inverters (ID:839) ( abstract ) |
| 11:15 | Implementation of Random SVPWM Strategy for Three-Phase Voltage Source Inverter Based on FPGA (ID:323) ( abstract ) |
| 11:15 | Analysis on Harmonic Characteristic of the Input Current in Indirect Matrix Converter (ID:093) ( abstract ) |
| 11:15 | Effects of Input Filter Designing and Input Voltage Measurement on Stability of Direct Matrix Converter (ID:740) ( abstract ) |
| 11:15 | Design and Analysis of Protection Circuits for Safe Operation of Direct Matrix Converters (ID:741) ( abstract ) |
| 11:15 | A Simplified DQ-Frame Current Controller for Single-Phase Grid-Connected Inverters with LCL Filters (ID:182) ( abstract ) |
| 11:15 | The reduction of zero-sequence voltage for open-end winding asynchronous motor driver with dual inverter (ID:196) ( abstract ) |
| 11:15 | A study on Low-profile DC-DC Converter Module by Applying Electromagnetic Induction type Wireless Power Transmission and Bluetooth Feedback Controller (ID:499) ( abstract ) |
11:15-12:45 Session 11J: Renewable Energy Applications
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 11:15 | Piezoelectric Energy Harvesting From Vortex Induced Vibration Using a Modified Circular Cylinder (ID:549) ( abstract ) |
| 11:15 | Study of Earth Fault Protection System for Substation of Battery Powered Railway Vehicle (ID:556) ( abstract ) |
| 11:15 | A DC-Type Dynamic Voltage Restorer Based on Hybrid Energy Storage (ID:924) ( abstract ) |
| 11:15 | Calculation of Motor Electromagnetic Field for Flywheel Energy Storage System in Discharge Mode (ID:551) ( abstract ) |
| 11:15 | Enhancement of Transient Stability of Synchronous Generators Using Kinetic Energy of Variable Speed Wind Generators (ID:128) ( abstract ) |
| 11:15 | A Novel Method to Avoid Degradation Due to Demagnetization of Linear PM Generators for Oceanic Wave Energy Extraction (ID:803) ( abstract ) |
| 11:15 | Investigation of a Doubly Salient Halbach Array Linear Permanent Magnet Machine for Wave Energy Converters (ID:845) ( abstract ) |
| 11:15 | A comparative study of modified swarm intelligence based algorithms for solving multi-objective optimal power flow incorporating wind power and load uncertainties (ID: 927) ( abstract ) |
13:45-15:15 Session 12A: Linear Machines
Oral Presentations
Chairs:
Location: Cockle Bay Room 2, ICC
| 13:45 | Investigation of a Novel Hybrid Radial and Axial Magnetic Circuit Permanent Magnet Motor with Flux Weakening Capability for EVs (ID:349) ( abstract ) |
| 14:00 | Thrust Ripple Reduction of a Five-Phase Double-Sided C-Core Modular Linear Permanent-Magnet Synchronous Machine (ID:104) ( abstract ) |
| 14:15 | Design and Control Optimization of Linear Induction Motor Drive for Efficiency Improvement (ID:570) ( abstract ) |
| 14:30 | Force Ripple Reduction of a Linear Flux Switching Motor with Segmented Secondary (ID:351) ( abstract ) |
| 14:45 | Comparative Study and Optimal Design of Alternative PM Configuration Transverse Flux Linear Machine (ID:350) ( abstract ) |
13:45-15:15 Session 12B: Losses and Thermal Management of Electric Machines
Oral Presentations
Chairs:
Location: Meeting Room C3.1, ICC
| 13:45 | FEA Based Analysis on Effect of Slot Pole Combination on Motor Torque and Magnet Eddy Current Loss With Bonded NdFeB Halbach Rotor (ID:258) ( abstract ) |
| 14:00 | Dual-Inverter Counteracting PWM Schemes for Iron Loss Reduction in Twin-Coil Induction Motors (ID:384) ( abstract ) |
| 14:15 | Extra End Effect of Axially Segmented Stator Core of High Speed High Power Permanent Magnet Electric Machines (ID:389) ( abstract ) |
| 14:30 | Effect of AC Losses on Temperature Rise Distribution in Concentrated Windings of Permanent Magnet Machines with Parallel Strands (ID:357) ( abstract ) |
| 14:45 | Core Loss Measurement Under Elliptical Loci of Magnetic Flux Density (ID:320) ( abstract ) |
13:45-15:15 Session 12C: Optimization of Electric Machines
Oral Presentations
Chairs:
Location: Meeting Room C3.2, ICC
| 13:45 | Validation by Measurements of a Windage Losses Model for Very-High-Speed Machines (ID:505) ( abstract ) |
| 14:00 | Multi-Objective Optimization Algorithm of A Magnetic Field Modulation Motor Based on Advanced Differential Evolution (ID:304) ( abstract ) |
| 14:15 | Rotor Design and Optimization of the Single-phase Line-start Synchronous Reluctance Motor (ID:225) ( abstract ) |
| 14:30 | Multilevel Design Optimization Method for Permanent Magnet Motors (ID:677) ( abstract ) |
| 14:45 | Integrated Design of 10MW High Speed Solid Rotor Induction Motor Based on Multi-Physics Fields Analysis (ID:404) ( abstract ) |
13:45-15:15 Session 12D: Wireless Power Transfer
Oral Presentations
Chairs:
Ruiwu Cao and Kyu-Tae Kim
Location: Meeting Room C3.4, ICC
| 13:45 | New Design Concept of a Bidirectional Wireless Power Transfer System using Dual Active Bridge Topology (ID:904) ( abstract ) |
| 14:00 | Design of a Temperature Transmitter with Contactless Power and Data Transmission (ID:467) ( abstract ) |
| 14:15 | Surface Spiral Parallel and Antiparallel Winding Designs for Low Spatial Voltage Stress, High Efficiency, Inductive Wireless Power Transfer Systems (ID:084) ( abstract ) |
| 14:30 | Optimal Charging Method for Mismatched Transceiver Coils in Wireless Power Transfer (ID:287) ( abstract ) |
| 14:45 | A Medium-Voltage Motor Drive Based on Diode-clamped Modular Multilevel Converters (ID:187) ( abstract ) |
13:45-15:15 Session 12E: Photovoltaics
Oral Presentations
Chairs:
Location: Meeting Room C3.5, ICC
| 13:45 | Parameter Identification of Simplified Engineering Model for PV Array Based on Shuffled Frog Leaping Algorithm (ID:037) ( abstract ) |
| 14:00 | Economic Optimization of Hybrid PV-Battery Systems Using Hourly Satellite Insolation and Daily Temperature Data: A Case Study (ID:230) ( abstract ) |
| 14:15 | Parameter Identification of Photovoltaic Cell Based on Improved Least Square Method (ID:049) ( abstract ) |
| 14:30 | Research on Parameter Identification of Photovoltaic Array Based on Measured Data (ID:050) ( abstract ) |
| 14:45 | An Improved Coordinated Control Strategy for PV System Integration with VSC-MVDC Technology (ID:234) ( abstract ) |
| 15:00 | Distributed Series Direct Current System for Electricity Collection, Voltage Promotion and Grid Access of Large-scale Photovoltaic Station (ID:448) ( abstract ) |
13:45-15:15 Session 12F: Control in Electric Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Deep Flux Weakening Control with Six-Step Overmodulation for a Segmented Interior Permanent Magnet Synchronous Motor (ID:890) ( abstract ) |
| 13:45 | Performance of Runge-Kutta family numerical solvers for calculation of transient processes in AC machines (ID:279) ( abstract ) |
| 13:45 | Torque Ripple Reduction of Permanent-Magnet Synchronous Motors Based on Predictive Sequence Control (ID:254) ( abstract ) |
| 13:45 | Online Inductance Estimation of PMSM based on the Current Derivative Measurement (ID:876) ( abstract ) |
| 13:45 | Load characteristics-oriented Control Strategy for Air Conditioners during Voltage Sags (ID:459) ( abstract ) |
| 13:45 | Research on the Influence of Time Delay on Fundamental Flux Controllable Reactor (ID:038) ( abstract ) |
| 13:45 | Novel Nonsingular Terminal Sliding Mode Variable Structure Control for a Bearingless Induction Motor (ID:449) ( abstract ) |
| 13:45 | Research on Harmonic Current Suppression Technology of Permanent Magnet Synchronous Motor Based on Surrogate Model (ID:615) ( abstract ) |
| 13:45 | Uncontrollable Phenomenon and Digital Control Delay Analysis for High-Speed Permanent Magnet Synchronous Motor Drive (ID:744) ( abstract ) |
| 13:45 | An Optimal Design of an AFPMSM using Analytical Approach and Particle Swarm Optimization (ID:318) ( abstract ) |
| 13:45 | Tubular Permanent Magnet Linear Machine Using Transverse-Flux Flux-Reversal Topology (ID:477) ( abstract ) |
| 13:45 | Direct Thrust Control for Five-Phase Tubular Linear PM Motor Based on Third-Harmonic Current Suppression (ID:231) ( abstract ) |
13:45-15:15 Session 12G: Control in Electric Machines
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Analysis and Investigation on the Behavior and Performance of Single Phase Grid Connected Induction Generators System (ID:547) ( abstract ) |
| 13:45 | An Optimal Switching Table for PMSM DTC System Using Zero Voltage Vector (ID:707) ( abstract ) |
| 13:45 | Performance Improvement for a FMPM in-Wheel Motor Based on DB-DTFC with a New Current Observer (ID:155) ( abstract ) |
| 13:45 | Research on An Improved Virtual Flux Droop Control Method with Better Dynamic and Static Performance (ID:221) ( abstract ) |
| 13:45 | Examining the Unstable Behaviour of a Phenomenological Three Dimensional, Dipole-Based Hysteresis Model (ID:392) ( abstract ) |
| 13:45 | Development of a Network with Double Level Communication Used in Motor-Driven Spindle Spinning Frame (ID:856) ( abstract ) |
| 13:45 | Comparative Analysis of Pulsating Torque Reduction Methods of Variable Flux Reluctance Machines for Electric Vehicles (ID:284) ( abstract ) |
| 13:45 | The Analysis of the Influences of Switching Opportunity for a Novel 6/8 Pole Changing Line-Start Permanent Magnet Synchronous Motor (ID:145) ( abstract ) |
| 13:45 | The proposition of torque ripple estimation method in the d, q-axis voltage equation (ID:765) ( abstract ) |
| 13:45 | Comparison of Direct-Drive Permanent-Magnet Synchronous Motor and Permanent-Magnet Flux-Modulated Motor for Electric Vehicles (ID:022) ( abstract ) |
| 13:45 | Influence of Elementary Model Parameter Variations on Simulated Ferromagnetic Hysteresis Using a Ring-Shaped 3D Dipole Collective (ID:051) ( abstract ) |
| 13:45 | Sequential Multiobjective Optimization Method for Electromagnetic Inverse Problems (ID:277) ( abstract ) |
13:45-15:15 Session 12H: Control and Multilevel Inverters
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Single-Phase Five-Level Buck-Boost Inverter (ID:479) ( abstract ) |
| 13:45 | Finite-State-Machine Model of Boundary Control for Dual-Active-Bridge Converter (ID:541) ( abstract ) |
| 13:45 | Strong parameters robustness model predictive current control method (ID:592) ( abstract ) |
| 13:45 | A Suppression Method of The Low Frequency Fluctuation of The Neutral Point Potential under 3-Level SHEPWM based on 3-Order Harmonic (ID:430) ( abstract ) |
| 13:45 | Analysis and Performance of Two Dual Random SVPWM for Five-phase Inverter (ID:236) ( abstract ) |
| 13:45 | Control of Ultra-high Switching Frequency Converters using Virtual-flux based Direct Power Control (ID:083) ( abstract ) |
| 13:45 | A Seven Level Switched Capacitor Multilevel Inverter with Asymmetric Input Sources for Microgrids (ID:110) ( abstract ) |
| 13:45 | Neutral point Voltage Feedback Control Based on Double Modulation Wave Carrier-based PWM for Three-level Converters (ID:004) ( abstract ) |
| 13:45 | A Novel Gate Driver for High Speed Turn-on Switching of Ultra-low Feedback Capacitance SiC-VJFET (ID:108) ( abstract ) |
| 13:45 | Modified Carrier-Based Over-Modulation Technique for Improved Switching Performance of Multilevel Converters (ID:806) ( abstract ) |
13:45-15:15 Session 12I: Power Electronics in Power System Applications
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Study on the Closing State of High Voltage Disconnectors Based on the Modal Analysis (ID:435) ( abstract ) |
| 13:45 | Single-Phase To Three-Phase Converter with APF in House-Service Power Supply of Traction Substation (ID:553) ( abstract ) |
| 13:45 | Analysis of Economical Replacement Cycle Considering Maintenance and Condition change of Power Transformers (ID:302) ( abstract ) |
| 13:45 | Time Domain Analysis and Efficiency Research of High Voltage Power Supply for Electron Beam Welder Based on LCC Resonance in DCM (ID:249) ( abstract ) |
| 13:45 | Control strategy for dual active bridge based DC solid state transformer (ID:417) ( abstract ) |
| 13:45 | On-Load Automatic Voltage Regulation System Designed via Thyristor for Distribution Transformer (ID:070) ( abstract ) |
| 13:45 | Research on Short-circuit Force of Power Transformer Windings Considering Residual Stress (ID:352) ( abstract ) |
| 13:45 | Design and Research of Shared DC Bus of Converters (ID:604) ( abstract ) |
| 13:45 | A Novel Time Expansion Method to Cope with Simulator Delay in the Hardware-In-the-Loop Study of Hysteresis Current Control (ID:012) ( abstract ) |
| 13:45 | Power Electronic Zigzag Transformer for Experimental Voltage Generator (ID:528) ( abstract ) |
13:45-15:15 Session 12J: Microgrids (Power System)
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 13:45 | Multi-agent Systems Using Model Predictive Control for Coordinative Optimization Control of Microgrid (ID:533) ( abstract ) |
| 13:45 | Voltage Compensation Strategy Using Adaptive Virtual Impedance for Reactive Power Sharing in an Islanded Microgrid (ID:840) ( abstract ) |
| 13:45 | An Adaptive Droop Control Strategy of Energy Storage Control for Microgrid with Wind Power and Energy Storage Systems (ID:419) ( abstract ) |
| 13:45 | A Power Flow Control Strategy of a Constant-speed Microturbine-generation based Series Hybrid Power System (ID:409) ( abstract ) |
| 13:45 | Fast Identification of Active and Reactive Current Component for Single Phase Grid Interconnection (ID:815) ( abstract ) |
| 13:45 | Reactive Power Optimization of Low Voltage Distribution Network Based on Improved particle swarm optimization (ID:072) ( abstract ) |
| 13:45 | Frequency Control of Small Power System with Wind Generators Installed By Using DFIG Based Diesel Generator (ID:716) ( abstract ) |
| 13:45 | Harmonic Voltage Control for Five-Phase Induction Generator System With Direct Torque Control (ID:058) ( abstract ) |
| 13:45 | Adaptive Virtual Inertia Control for DC Microgrid with Variable Droop Coefficient (ID:423) ( abstract ) |
| 13:45 | Multi-Source Coordinated Control Strategy Based the Battery SOC for Islanded DC Microgrid (ID:603) ( abstract ) |
15:30-17:00 Session 13A: Microgrids (Power Electronics)
Oral Presentations
Chairs:
Location: Cockle Bay Room 2, ICC
| 15:30 | Bi-directional Converter for Interfacing Electrical Appliances with HFAC Enabled Power Distribution Systems in Critical Applications (ID:833) ( abstract ) |
| 15:45 | Accurate Copper Loss Analysis of a Multi-winding High-frequency Transformer for a Magnetically-coupled Residential Micro-grid (ID:767) ( abstract ) |
| 16:00 | The Control of a Three-phase Four-leg Grid-connected Inverter During Asymmetrical Fault (ID:676) ( abstract ) |
| 16:15 | Power Management and Control Strategy for Hybrid AC/DC Microgrids in Autonomous Operation Mode (ID:749) ( abstract ) |
| 16:30 | A Novel Small Signal Model of Multi-Bus Microgrids for Modeling Interaction of Droop Controllers through the Power Network (ID:043) ( abstract ) |
| 16:45 | Research of Microgrid Connecting Interface Based on Multi-port Power Electronic Transformer (ID:517) ( abstract ) |
15:30-17:00 Session 13B: Fault and Protection of Power System
Oral Presentations
Chairs:
Location: Meeting Room C3.1, ICC
| 15:30 | A Fault-aware Low-power-dissipation Dynamic Mapping Algorithm Based on NoC (ID:169) ( abstract ) |
| 15:45 | Research on the defects in the field Installation of Insulated Tubular Bus-bar and its test method (ID:842) ( abstract ) |
| 16:00 | Towards Online Bearing fault detection using Envelope Analysis of vibration signal and Decision Tree Classification Algorithm (ID:328) ( abstract ) |
| 16:15 | Numerical Calculation of the End Region of Large Air-Cooled Turbo-Generator Under the Single-phase Earth Fault (ID:531) ( abstract ) |
| 16:30 | Research on Sheath Development of Vacuum Circuit Breaker Based on Continuous Transition Model (ID:903) ( abstract ) |
| 16:45 | Optimization Design and Application of Converter Parameters of DC Vacuum Circuit Breaker (ID:901) ( abstract ) |
15:30-17:00 Session 13C: Microgrids (Power System)
Oral Presentations
Chairs:
Location: Meeting Room C3.2, ICC
| 15:30 | Distributed Secondary Voltage Regulation for Autonomous Microgrids (ID:848) ( abstract ) |
| 15:45 | New Energy Management Approach in Distribution Systems Considering Energy Storages (ID:308) ( abstract ) |
| 16:00 | Simplified Model of Multi-port Energy Router in 10kV Distribution Network (ID:177) ( abstract ) |
| 16:15 | Active Stabilization Control Strategy for Storage System Paralleled with Constant Power Loads (ID:525) ( abstract ) |
| 16:30 | Distributed Control for Economic Dispatch Problem in Microgrid (ID:418) ( abstract ) |
| 16:45 | Impact of Using Current Limiting Reactor on the Existing Circuit Breakers in Micro-Grids (ID:239) ( abstract ) |
15:30-17:00 Session 13D: Renewable Energies
Oral Presentations
Chairs:
Location: Meeting Room C3.4, ICC
| 15:30 | Risk-Constrained Offering Strategies of a Price-Maker Demand Response Aggregator (ID:566) ( abstract ) |
| 15:45 | Minimization of Building Energy Cost by Optimally Managing PV and Battery Energy Storage Systems (ID:759) ( abstract ) |
| 16:00 | Control Strategy based on Virtual Synchronous Generator of DFIG-Based Wind Turbine under Unbalanced Grid Voltage (ID:808) ( abstract ) |
| 16:15 | Research on a Field Modulated Linear Generator for wave energy conversion (ID:425) ( abstract ) |
| 16:30 | Control Strategy of Direct-drive Wave Energy Conversion System Based on Biological Intelligent Control Algorithm (ID:831) ( abstract ) |
15:30-17:00 Session 13E: Online monitoring, Measurement and Analysis
Oral Presentations
Chairs:
Location: Meeting Room C3.5, ICC
| 15:30 | Design and Analysis of a Halbach Arc Linear Permanent Magnet Machine for Large Telescope Application (ID:107) ( abstract ) |
| 15:45 | Study of Turbidity Analysis System Using Optical Devices (ID:247) ( abstract ) |
| 16:00 | Structure Optimization Design for 1000kV UHV Shield Ring Considering Fatigue Fracture (ID:138) ( abstract ) |
| 16:15 | A Review on Clustering of Residential Electricity Customers and Its Applications (ID:194) ( abstract ) |
| 16:30 | Condition Monitoring of Power Electronic Converters in Power Plants-A Review (ID:651) ( abstract ) |
| 16:45 | Fault Diagnostic Techniques for Induction Machines through Finite Element Analysis (ID:625) ( abstract ) |
15:30-17:00 Session 13F: Converters, Control and Applications
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | An Improved Model-Free Predictive Current Control of PWM Rectifiers (ID:739) ( abstract ) |
| 15:30 | A Study on Novel Active Clamp Snubber Applied DC-DC Quasi Resonant Flyback Converter to Effectively Reduce Switch Voltage Surge (ID:515) ( abstract ) |
| 15:30 | Generalized Space Vector PWM Technique for Multiphase Current Source Inverters (ID:411) ( abstract ) |
| 15:30 | Comparison of Current Source Rectifier and Inverter Topologies of Induction Heating Power Supply for Forging Applications (ID:809) ( abstract ) |
| 15:30 | Experimental Verification of Buck-boost Converter based Micro Inverter for Minimization of Magnetic Components (ID:869) ( abstract ) |
| 15:30 | Energy Balanced Design and Control for Converters with Natural Trajectory Tracking (ID:047) ( abstract ) |
| 15:30 | A Study of a Head-up Display Consisting of Multiple Virtual Image Windows (ID:889) ( abstract ) |
| 15:30 | Analysis on Reliability Characteristics of Power Electronic Devices for Aerial Vehicles (ID:706) ( abstract ) |
| 15:30 | Stability Analysis of Voltage Sampling Circuits applied to Switching Mode Power Supply with Fully-immersed Evaporative Cooling (ID:388) ( abstract ) |
15:30-17:00 Session 13G: Cables, Transformers and Transmission in Power System
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | Thermal Simulation of Fully-immersed Evaporative Cooling Switching Mode Power Supply (ID:390) ( abstract ) |
| 15:30 | Fault Diagnosis of Power Transformer Using Confidence Weight based Fusion Method (ID:069) ( abstract ) |
| 15:30 | Uncertainty Propagation in Successive Step-up Measurements of DC High Voltage and Current up to 200 kV and 4000 A (ID:669) ( abstract ) |
| 15:30 | Study on Temperature Field Modeling and Operation Optimization of Soil Buried Double-circuit Cables (ID:071) ( abstract ) |
| 15:30 | A New Calculation Method for Fault Transient Expression of Ring DC Systems (ID:433) ( abstract ) |
| 15:30 | Influence of HTS DC Cable Capacitance on Harmonics in HVDC Transmission System (ID:612) ( abstract ) |
| 15:30 | Simulation of the Effect of Bubble Defect on the distribution of Electric Field in Epoxy Resin Pouring Type Insulated Tubular Bus-bar (ID:792) ( abstract ) |
| 15:30 | Power Cable Core Temperature Retrieval with Uncertain Parameters Identification of Calculation Models (ID:906) ( abstract ) |
| 15:30 | Current Distribution Analysis for a Multilayer High-Tc Superconducting Cable Considering Magnetic Hysteresis (ID:797) ( abstract ) |
| 15:30 | Comparative Analysis of Different Cable of Electromagnetic Arresting Gear (ID:727) ( abstract ) |
15:30-17:00 Session 13H: Electrical Systems Studies
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | The Design and Simulation of a Teaching Virtual Platform by Combining LabVIEW and Simulink for Undergraduates of Electrical Engineering (ID:300) ( abstract ) |
| 15:30 | A DSP Teaching Example based on Simulink for Undergraduates of Electrical Engineering (ID:673) ( abstract ) |
| 15:30 | Research of Efficient FEM Algorithm With Precise and Parallel Computing (ID:917) ( abstract ) |
| 15:30 | The teaching Reform on the “Electrical Machinery”Course Offered to the "Excellence Engineer" Class (ID:366) ( abstract ) |
| 15:30 | The Research on the Response Surface-Geometric Feature Charge Simulation Method (ID:905) ( abstract ) |
| 15:30 | Measurement and Analysis of UHV Transformer Noise with Sound Intensity and Vibration Method (ID:920) ( abstract ) |
| 15:30 | Noise Analysis of UHV Power Transformer and Research on Active Noise Reduction System (ID:921) ( abstract ) |
| 15:30 | Comparative Analysis of 3-D Magnetic Field for Axial Magnetic Field Vacuum Interrupter Contact with Different Iron Core Structure (ID:922) ( abstract ) |
| 15:30 | Development of the Performance Measurement System for UPS Product (ID:865) ( abstract ) |
15:30-17:00 Session 13I: Thermal and Mechanical Analysis
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | Auxiliary Power Unit with SiC Device for Railroad Car (ID:412) ( abstract ) |
| 15:30 | Power Losses of Si/SiC Semiconductors in Medium Voltage Energy Router Sub-modules with Hybrid Topology (ID:753) ( abstract ) |
| 15:30 | Mechanical design considerations of Halbach-array rotor for a new ironless stator axial-flux PM machine (ID:755) ( abstract ) |
| 15:30 | Intelligent circuit breaker using thermoelectric hybrid overload protection (ID:893) ( abstract ) |
| 15:30 | Research on closed loop control system of double coil contactor (ID:896) ( abstract ) |
| 15:30 | Experimental Research on Atomization Parameters in Spray Cooling System (ID:582) ( abstract ) |
| 15:30 | The Experimental Studies on Spray Parameters in Spray Evaporatvie Cooling Motors (ID:180) ( abstract ) |
| 15:30 | Investigation of the Heat Characteristic Based on the Exergy Destruction Rate for High Power Density Motor (ID:098) ( abstract ) |
15:30-17:00 Session 13J: Electric Machines Applications
Poster Presentations
Chair:
Location: Cockle Bay Room 1, ICC
| 15:30 | The Key Technology to Speed Sensor-less Vector Control of Locomotive Traction (ID:343) ( abstract ) |
| 15:30 | A Novel Strategy of Resonant Frequency Tracking Control for Linear Compressor (ID:439) ( abstract ) |
| 15:30 | Torque Control of Power Assisted Bike via Planetary Gear Mechanism (ID:440) ( abstract ) |
| 15:30 | A Novel Position-Sensorless Startup Method for DSEM (ID:114) ( abstract ) |
| 15:30 | Basic study for achieving stable magnetic levitation of a steel plate irrespective of its thickness (ID:100) ( abstract ) |
| 15:30 | Study on Dynamic Coupling Characteristics of Thrust and Levitation Force for Maglev Train (ID:106) ( abstract ) |
| 15:30 | Thermal Performance of a Flux-Switching Permanent Magnet Machine For an Integrated Starter Generator in Hybrid Electric Vehicles (ID:687) ( abstract ) |
| 15:30 | Three-Dimensional Automatic Generation Magnetic Equivalent Circuit Using Mesh-Based Formulation (ID:269) ( abstract ) |
17:00-17:30 Session : Closing Ceremony
Location: Cockle Bay Room 2, ICC